Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : The properties of the subduction interplate domain are likely to affect not only the seismogenic potential of the subduction area but also the overall subduction process, as it influences its viability. Numerical simulations are performed to model the long-term equilibrium state of the subduction interplate when the diving lithosphere interacts with both the overriding plate and the surrounding convective mantle. The thermomechanical model combines a non-Newtonian viscous rheology and a pseudo-brittle rheology. Rock strength here depends on depth, temperature and stress, for both oceanic crust and mantle rocks. I study the evolution through time of, on one hand, the brittle-ductile transition (BDT) depth, zBDT, and, on the other hand, of the kinematic decoupling depth, zdec, simulated along the subduction interplate. The results show that both a high friction and a low ductile strength at the asthenospheric wedge tip shallow zBDT. The influence of the weak material activation energy is of second order but not negligible. zBDT becomes dependent on the ductile strength increase with depth (activation volume) if the BDT occurs at the interplate decoupling depth. Regarding the interplate decoupling depth, it is shallowed (1) significantly if mantle viscosity at asthenospheric wedge tip is low, (2) if the difference in mantle and interplate activation energy is weak, and (3) if the activation volume is increased. Very low friction coefficients and/or low asthenospheric viscosities promote zBDT = zdec. I then present how the subducting lithosphere age affects the brittle-ductile transition depth and the kinematic decoupling depth in this model. Simulations show that a rheological model in which the respective activation energies of mantle and interplate material are too close hinders the mechanical decoupling at the down-dip extent of the interplate, and eventually jams the subduction process during incipient subduction of a young (20-Myr-old) and soft lithosphere under a thick upper plate. Finally, both the BDT depth and the decoupling depth are a function of the subducting plate age, but are not influenced in the same fashion: cool and old subducting plates deepen the BDT but shallow the interplate decoupling depth. Even if BDT and kinematic decoupling are intrinsically related to different mechanisms of deformation, this work shows that they are able to interact closely. Comparison between modelling results and observations suggests a minimum friction coefficient of 0.045 for the interplate plane, even 0.069 in some cases, to model realistic BDT depths. The modelled zdec is a bit deeper than suggested by geophysical observations. Eventually, the better way to improve the adjustment to observations may rely on a moderate to strong asthenosphere viscosity reduction in the metasomatised mantle wedge.
ISSN: 1869-9510

hal-00795559
https://hal.archives-ouvertes.fr/hal-00795559
DOI : 10.5194/se-3-467-2012, 2012

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : International audience
This paper presents the effects of chemical and thermal treatments on the strength of vegetable fibers that were being considered as reinforcements in cementitious matrix composites for affordable housing. These include vegetable fibers extracted from banana trunks and sugar cane residues. The results suggested that pyrolysis increased the fiber strength, at least by a factor three. Acid attack generally degraded the strengths, while alkali attack had only a limited effect. Pyrolyzed banana leaves, coconut coir, and coconut sheaths fibers were also tested. The implications of the results were discussed for the development of strong cementitious matrix composites.
ISSN: 1042-6914

hal-00809827
https://hal.univ-antilles.fr/hal-00809827
DOI : 10.1080/10426910601063386

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A subject of continuing debate is how the Earth's lithospheric portion of the upper mantle has remained the thickest (> 200 km) and oldest (> 3 Gy) beneath cratons and is yet surrounded by a vigorously convecting asthenosphere. It is generally admitted that water is a key parameter in the strength and longevity of cratonic roots, because olivine, the main phase of the lithospheric mantle, becomes stronger if its water content decreases. Expanding upon the work presented in Novella et al. (2015) and Taylor et al. (2016), we report new water contents for additional olivine inclusions in diamonds together with the trace-element composition for all olivine inclusions, as well as for mantle xenoliths from various kimberlite pipes located on the Siberian craton. The olivine diamond inclusions from this study have systematically low-water contents (< 50 ppmw H2O), moderate to high forsterite (e.g., Fo91–94) contents and low Ni, Co, and Zn ppm contents (e.g., < 2848, < 108, and < 47 ppm, respectively). In contrast, olivines from Siberian craton mantle xenoliths have a wide range of water contents (6–323 ppmw H2O) and extend to lower-Fo (91–92), Ni, Co, and Zn-rich compositions, compared to the diamond inclusions. Depleted incompatible trace-element concentrations in olivine (0.1–0.001 × Primitive Mantle) advance our hypothesis for the protogenetic origins for the majority of Siberian diamond inclusions. These observations are consistent with the peridotite xenoliths as representing a part of the cratonic lithosphere that has experienced melt re-fertilization, which has also transported water. The olivine diamond inclusions, on the other hand, preserve “micro-samples” of an initial, dry cratonic lithosphere, mostly resulting from melting events. These inclusions are likely sourced from the initial cratonic mantle lithosphere, which thereby, resisted delamination over time, due to its buoyancy and strength, imparted from melt and water depletion, respectively. And thus, our data provides a major argument that the kimberlite-hosted mantle xenoliths may be more metasomatized than common rocks at the base of the Siberian and other cratonic roots away from kimberlite fields.
ISSN: 0024-4937

hal-01467731
https://hal.archives-ouvertes.fr/hal-01467731
DOI : 10.1016/j.lithos.2016.07.023

Éditeur(s) : Elsevier
Résumé : Sea cruises were conducted for 57 days over 16 months to characterise pelagic fish aggregations around 2 moored fish aggregating devices (FADs) in Martinique (Lesser Antilles). Echosounder surveys run in a star pattern were used in conjunction with obliquely beamed sonar observations. An echo-integration-by-shoal algorithm was implemented to isolate pelagic fish shoals from sound scattering layers and to compute mean morphometric, positional and density parameters. Tree regressions were used to select and classify pelagic fish Target Strengths (TS), with reference to their spatial and temporal characteristics. The main type of pelagic fish aggregation was a large sub-surface aggregation. It was observed during all daytime periods within a radius of 400 m of the FAD. A smaller type of aggregation was observed closer to the surface and to the FAD in 65% of daytime periods. Large scattered fish were observed in 16% of daytime periods. At night, a medium-sized aggregation was detected in the sub-surface in 75% of night-time periods. The sizes of the fish inside the aggregations (determined from TS values) were lower in the small near-surface aggregation than in the large sub-surface aggregation. Mean packing densities of sub-surface medium fish and near-surface small fish aggregations (determined from TS and shoal acoustic density) were respectively 0.2 fish per m3 and 1.3 fish per m3. The acoustic methodology and results are discussed with reference to the characteristics and performance of the echosounder and to the spatial structure of pelagic fish aggregations around moored FADs in Martinique.
Fisheries Research (0165-7836) (Elsevier), 2006-06 , Vol. 82 , N. 1-3 , P. 162-175

Droits : Elsevier 2006
http://archimer.ifremer.fr/doc/2006/publication-1734.pdf
DOI:10.1016/j.fishres.2006.06.025
http://archimer.ifremer.fr/doc/00000/1734/

Éditeur(s) : Elsevier France-editions Scientifiques Medicales Elsevier
Résumé : The essential characteristics of the vegetation dynamics of tropical Africa remain only partially known. This study assesses the succession of vegetation-types over Central Africa during the last two glacial/interglacial cycles. Analysis of core KZai 02, which contains pollen from the Zaire River watershed (latitudes 9°N-13°S), allows the investigation of long-term patterns of plant ecosystem development and their climatic causes. Core KZai 02 (18.20 m long) was recovered from 6°24.20′S/9°54.10′E in the uppermost axial edifice of the Zaire deep sea fan. The chronology of this sedimentary archive was established using nannofossils and correlations of pollen and total organic carbon signals with the nearby core GeoB1008. The pollen record indicates that: (i) glacials (MIS 6, 4, 2) are marked by the development of afromontane (Podocarpus) forest at high altitudes when central basin lowlands were occupied by Cyperaceae marshes and savannah; (ii) during interglacials (MIS 1, 5) lowland forests were developed, marked by the successive expansion of pioneer, warm-temperate, rain forests, and mangrove indicating sea-level rise; (iii) glacial-interglacial transitions (MIS 6/5, 2/1) display similar vegetation dynamics. The strong evidence of afromontane forest and the opening of the vegetation during glacials suggest a reduced latitudinal distribution of rainfall by the strengthening of the trade wind system. West African monsoon systems were enhanced during interglacials, allowing the progressive development of lowland forests. The development of rain and pioneer forests during glacial Heinrich stadials suggests an enhancement of water availability in tropical Africa associated with these high latitude events. However, no augmentation of wind activity, described by previous studies, is evidenced by our pollen record. Similar vegetation successions during glacial/interglacial transitions suggest the diachronous and stepped intervention of CO2 (emphasizing the influence of temperature on plant ecosystems) and water availability.
Geobios (0016-6995) (Elsevier France-editions Scientifiques Medicales Elsevier), 2014-07 , Vol. 47 , N. 4 , P. 183-198

Droits : 2014 Elsevier Masson SAS. All rights reserved.
http://archimer.ifremer.fr/doc/00199/31031/29436.pdf
DOI:10.1016/j.geobios.2014.06.002
http://archimer.ifremer.fr/doc/00199/31031/

Éditeur(s) : Elsevier
Résumé : High-resolution sedimentological and micropaleontological studies of several deep-sea cores retrieved from the levees of the Celtic and Armorican turbidite systems (Bay of Biscay - North Atlantic Ocean) allow the detection of the major oscillations of the British-Irish Ice Sheet (BIIS) and 'Fleuve Manche' palaeoriver discharges over the last 30,000 years, which were mainly triggered by climate changes. Between 30 and 20 cal ka, the turbiditic activity on the Celtic-Annorican margin was weak, contrasting with previous stratigraphic models which predicted a substantial increase of sediment supply during low sea-level stands. This low turbidite deposit frequency was most likely the result of a weak activity of the 'Fleuve Manche' palaeoriver and/or of a reduced seaward transfer of sediments from the shelf to the margin. However, two episodes of turbiditic activity increase were detected in the Celtic-Armorican margin, during Heinrich events (HE) 3 and 2. This strengthening of the turbiditic activity was triggered by the meltwater releases from European ice sheets and glaciers favouring the seaward transfer of subglacial material, at least via 'Fleuve Manche' palaeoriver. At around 20 cal ka, a significant increase of turbidite deposit frequency occurred as a response to the onset of the last deglaciation. The retreat of the European ice sheets and glaciers induced a substantial increase of the 'Fleuve Manche' palaeoriver discharges and seaward transfer of continentally-derived material into the Armorican turbidite system. The intensification of the turbiditic activity on the Celtic system was directly sustained by the widespread transport of subglacial sediments from the British-Irish Ice Sheet (BIIS) to the Celtic Sea via the Irish Sea Basin. A sudden reduction of turbiditic activity in the Armorican system, between ca. 19 and 18.3 cal ka, could have been triggered by the first well known abrupt sea-level rise ('meltwater pulse', at around 19 cal ka) favouring the trapping of sediment in the 'Fleuve Manche' palaeoriver valleys and the decrease of the seaward transfer of continentally-derived material. The maximum of turbiditic activity strengthening in the Celtic-Armorican margin, between ca. 18.3 and 17 cal ka, was induced by the decay of European ice sheets and glaciers producing the most extreme episode of the 'Fleuve Manche' palaeoriver runoff and a great seaward transfer of subglacial material into the Bay of Biscay, Between ca. 17.5 and 16 cal ka, the turbiditic activity significantly decreased in both Celtic and Armorican turbidite systems in response to a global re-advance of glaciers and ice sheets in Europe. The last episode of ice sheet retreat, between ca. 16 and 14 cal ka, is well expressed in the Celtic system by a new increase of the turbiditic activity. The major episode of sea-level rise at around 14 cal ka ('Meltwater Pulse 1A'), precluding the seaward transfer of sediments, induced the end of turbiditic activity in both the Celtic and the Armorican system. Although two main phases of global sea-level rise seem to have had an effect on the Celtic-Armorican margin, this work proposes the BUS retreat and associated riverine discharges as the main trigger mechanisms of the turbiditic activity in this region during the last 30,000 years.
Marine Geology (0025-3227) (Elsevier), 2008 , Vol. 247 , N. 1-2 , P. 84-103

Droits : 2008 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2008/publication-3729.pdf
DOI:10.1016/j.margeo.2007.08.006
http://archimer.ifremer.fr/doc/00000/3729/

Éditeur(s) : HAL CCSD
Résumé : International audience
In this paper, we compare the effect of rolling resistance at the contacts in granular systems composed of disks with the effect of angularity in granular systems composed of regular polygonal particles. For this purpose, we use contact dynamics simulations. By means of a simple shear numerical device, we investigate the mechanical behavior of these materials in the steady state in terms of shear strength, solid fraction, force and fabric anisotropies, and probability distribution of contact forces. We find that, based on the energy dissipation associated with relative rotation between two particles in contact, the effect of rolling resistance can explicitly be identified with that of the number of sides in a regular polygonal particle. This finding supports the use of rolling resistance as a shape parameter accounting for particle angularity and shows unambiguously that one of the main influencing factors behind the mechanical behavior of granular systems composed of noncircular particles is the partial hindrance of rotations as a result of angular particle shape.
AIP Conference Proceedings
Sydney, Australia

hal-00842799
https://hal.archives-ouvertes.fr/hal-00842799
https://hal.archives-ouvertes.fr/hal-00842799/document
https://hal.archives-ouvertes.fr/hal-00842799/file/Comparison_effects_rolling_Estrada_al.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : Grain-size analyses, coupled with end-member modelling, have been performed on the terrigenous fraction of two Leg 184 Ocean Drilling Program sites (1144 and 1146) from the South China Sea. The grain-size distributions over the last 1.8 Ma enable a new interpretation of their connections to sea-level variations and East Asian monsoon strength. Previous investigations in this area have associated grain-size variability with enhanced eolian input during glacial stages. End-member modelling downgrades the importance of this eolian contribution and indicates that the sediments can be described as a mixture of three end-members: fluvial mud inputs, shelf reworking and river mouth migration. Grain-size variations in the Pleistocene section of the cores indicate a multiple-stage evolution: (i) from 1.8 to 1.25 Ma, the downcore grain-size variations are low but show a correspondence between monsoon rainfall intensity and the fine grain-sized fluvial inputs; no link with sea-level variations is noticeable; (ii) from 1.25 to 0.9 Ma, there is an increase (decrease) in the intermediate (fine) end-member (not, vert, similar 100 kyr cycle) that is associated with the onset of a stronger summer monsoon and modest shelf reworking; (iii) from 0.9 to 0 Ma the grain-size record is dominated by global sea-level variations; each glacial stage is associated with extensive shelf reworking and conveyance of coarse particles to the basin.
ISSN: 0033-5894

hal-00404671
https://hal.archives-ouvertes.fr/hal-00404671
DOI : 10.1016/j.yqres.2007.03.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Kazdag Massif exposes an extensional metamorphic dome in the Biga Peninsula of northwest Turkey, bounded on both flanks by detachments and/or shear zones. The northern flank is marked by the extensional Alakeci shear zone (ASZ), with poorly known P-T-t path. We therefore focus on metamorphic conditions and temporal history of the ASZ to determine its tectono-metamorphic evolution. ASZ mylonites were derived from both the footwall Kazdag Massif core metamorphic rocks and the hanging wall Cetmi melange lithologies. The mylonitic fabrics in the ASZ depict a top-to-the NNE shearing, parallel to the NNE-plunging stretching lineation and NNW-dipping mylonitic foliation. This geometry implies normal sense movement i.e. north-side down-dip extensional displacement along this flank of the Kazdag Massif. The northward transition from ductile to brittle-ductile shear regime through the ASZ shows that the non-coaxial deformation occurred at decreasing temperatures and degree of metamorphism. The paragenesis in equilibrium of the mylonitic gneisses and schists contains quartz + feldspar + muscovite + biotite + garnet staurolite, with late retrogressive chlorite after biotite and garnet. Calculated thermo-barometric conditions for ASZ rocks yielded pressures between 6.9 and 5.7 kbar and temperatures between 706 and 587 degrees C, which constrain the peak metamorphism. The mylonitic rocks supplied isochron Ar-39/Ar-40 mica ages between 26.97 and 24.19 Ma, which we interpret to date the cooling of the mylonites following the P-T decrease across the ASZ. The metamorphic data support the structural record and strengthen the extensional character of the ASZ. The transition from sillimanite-bearing footwall Kazdag Massif core gneisses in the deeper structural levels to chlorite schists; towards the shallow structural levels at the top of the ASZ, is consistent with an extensional exhumation of the metamorphic pile. These data allow us to determine the peak P-T conditions and the temporal evolution in the northern flank of the Kazdag Massif, where Late Oligocene extensional exhumation was assisted by NNE-directed ductile-brittle ASZ, which had operated from amphibolite to greenschist facies. The ASZ, together with similar time-constrained ductile-brittle activity of SW-directed detachment along the southern flank of the massif, collectively indicates a bivergent mode of extension in the western Kazdag Massif. The latter is likely influenced by magmatic activity spatially and temporally related to these extensional zones. At the regional scale, the bivergent tectono-metamorphic pattern of the Kazdag Massif is similar to those observed on other places of the north-central Aegean domain.
ISSN: 0024-4937

hal-00445246
https://hal.archives-ouvertes.fr/hal-00445246
DOI : 10.1016/j.lithos.2009.02.010

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Le tourisme de croisière est un secteur d’activité en pleine expansion (16 millions de passagers en 2011). De nos jours, la croisière reste encore une affaire essentiellement américaine, dominée par les clientèles nord-américaines, et dont le champ spatial privilégié est la mer des Caraïbes. Les circuits américains de la croisière s’étendent et se diversifient, du canal du Panama aux confins de l’Alaska. Parallèlement, la croisière conforte sa position sur les mers méditerranéenne et baltique et se déploie en Asie orientale, des rivages de la mer de Chine aux grands fleuves. Entre permanences et recompositions, l’industrie de la croisière doit relever plusieurs défis tels que les limites du gigantisme (plus de 6 000 passagers à bord), ses relations avec les territoires d’accueil (les ports d’escales), le renouvellement du produit « croisière ».
Cruise tourism is a sector that is rapidly expanding (16 million passengers in 2011). Today, cruising remains an essentially American affair, dominated by North American clients whose preferred destination is the Caribbean Sea. American cruise circuits continue to extend and diversify from the Panama Canal to the edge of Alaska. Meanwhile, cruises strengthen their position on the Mediterranean and Baltic Seas and has launched in East Asia from shores of the South China Sea to major rivers. Between continuity and recomposition, the cruise industry faces several challenges such as the limits of overcapacity (more than 6,000 passengers on board), its relationship with the host territories (ports of call), and the renewal of the “cruise” products.
Amérique du Nord
Caraïbes

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.5629
http://journals.openedition.org/etudescaribeennes/5629

Éditeur(s) : Ieee-inst Electrical Electronics Engineers Inc
Résumé : The synthetic aperture radar (SAR) Doppler centroid has been used to estimate the scatter line-of-sight radar velocity. In weak to moderate ocean surface current environment, the SAR Doppler centroid is dominated by the directionality and strength of wave-induced ocean surface displacements. In this paper, we show how this sea state signature can be used to improve surface wind retrieval from SAR. Doppler shifts of C-band radar return signals from the ocean are thoroughly investigated by colocating wind measurements from the ASCAT scatterometer with Doppler centroid anomalies retrieved from Envisat ASAR. An empirical geophysical model function (CDOP) is derived, predicting Doppler shifts at both VV and HH polarization as function of wind speed, radar incidence angle, and wind direction with respect to radar look direction. This function is used into a Bayesian inversion scheme in combination with wind from a priori forecast model and the normalized radar cross section (NRCS). The benefit of Doppler for SAR wind retrieval is shown in complex meteorological situations such as atmospheric fronts or low pressure systems. Using in situ information, validation reveals that this method helps to improve the wind direction retrieval. Uncertainty of the calibration of Doppler shift from Envisat ASAR hampers the inversion scheme in cases where NRCS and model wind are accurate and in close agreement. The method is however very promising with respect of future SAR missions, in particular Sentinel-1, where the Doppler centroid anomaly will be more robustly retrieved.
Ieee Transactions On Geoscience And Remote Sensing (0196-2892) (Ieee-inst Electrical Electronics Engineers Inc), 2012-07 , Vol. 50 , N. 7 , P. 2901-2909

Droits : 2012 IEEE
http://archimer.ifremer.fr/doc/00088/19896/17554.pdf
DOI:10.1109/TGRS.2011.2174998
http://archimer.ifremer.fr/doc/00088/19896/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Children are exposed to toxic metals and metalloids via their diet and environment. Our objective was to assess the aggregate chronic exposure of children aged 3–6 years, living in France, to As, Cd, Cr, Cu, Mn, Pb, Sb, Sr, and V present in diet, tap water, air, soil and floor dust in the years 2007–2009. Dietary data came from the French Total Diet Study, while concentrations in residential tap water, soil and indoor floor dust came from the ‘Plomb-Habitat’ nationwide representative survey on children's lead exposure at home. Indoor air concentrations were assumed to be equal to outdoor air concentrations, which were retrieved from regulatory measurements networks. Human exposure factors were retrieved from literature. Data were combined with Monte Carlo simulations. Median exposures were 1.7, 0.3, 10.2, 34.1, 60.3, 0.7, 0.1, 44.3, 1.5 and 95th percentiles were 4.4, 0.5, 15.8, 61.3, 98.3, 2.5, 0.1, 111.1, 2.9 μg/kg bw/d for As, Cd, Cr, Cu, Mn, Pb, Sb, Sr, and V respectively. Dietary exposures dominate aggregate exposures, with the notable exception of Pb - for which soils and indoor floor dust ingestion contribute most at the 95th percentile. The strengths of this study are that it aggregates exposures that are often estimated separately, and uses a large amount of representative data. This assessment is limited to main diet and residential exposure, and does not take into account the relative bioavailability of compounds. These results could be used to help target prevention strategies.
ISSN: 0160-4120

inserm-01404061
http://www.hal.inserm.fr/inserm-01404061
http://www.hal.inserm.fr/inserm-01404061/document
http://www.hal.inserm.fr/inserm-01404061/file/rev1%20-%20MS%20Expo%20metals.pdf
DOI : 10.1016/j.envint.2016.10.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic tomography and high surface heat flow models indicate an anomalously thin and hot lithospheric mantle beneath the Canadian Cordillera. To understand the thermal and deformational history of the lithospheric mantle under these conditions, we performed a study of the microstructures, crystal preferred orientations (CPO), and seismic anisotropy of mantle xenoliths collected in the Summit Lake volcano in the southern Canadian Cordillera. The xenoliths vary in composition between spinel lherzolites, cpx-rich lherzolites, and wehrlites. All samples are coarse-grained and show clear evidence for annealing, but deformation microstructures are well-preserved in the spinel lherzolites. Olivine CPO is characterized by a strong point-maximum of [100] and by a girdle distribution of [010[ and [001] axes normal to it; CPO strength is variable, spinel-lherzolites have the strongest CPO. Some samples show a weak orthopyroxene CPO consistent with the olivine one. However most pyroxenes have random CPO, interstitial shapes and undeformed appearance, which suggest a secondary origin by reactive melt percolation under static conditions, leading to crystallization of cpx + sp +/- opx at the expenses of olivine, followed by crystallization of cpx + sp +/- ol at the expenses of opx to produce the wehrlites. The studied xenoliths have typical upper mantle seismic properties patterns with fastest propagation of P-waves and polarization of S-waves parallel to the olivine [100] maxima. Maximum P- and S-waves anisotropy for lherzolites are 8 and 5% respectively. Dispersion of the olivine CPO due to neocrystallization of olivine results in weaker anisotropies (6.5 and 3.5%) in wehrlites. Seismic velocities calculated using a geotherm consistent with the equilibrium temperatures of the Summit Lake xenoliths are 3-4% lower than those expected in a normal, 100 km-thick lithosphere, consistent with seismic tomography models for the region. This high geothermal gradient may be partially explained by considering the anisotropy of thermal conductivity of olivine and subhorizontal foliations in the lithospheric mantle, which result in a decrease by up to 15% of the thermal conductivity in the vertical direction.
ISSN: 0040-1951

hal-00618332
https://hal.archives-ouvertes.fr/hal-00618332
DOI : 10.1016/j.tecto.2011.04.014

Éditeur(s) : HAL CCSD Université des Antilles
Résumé : International audience
Cruise tourism is a sector that is rapidly expanding (16 million passengers in 2011). Today, cruising remains an essentially American affair, dominated by North American clients whose preferred destination is the Caribbean Sea. American cruise circuits continue to extend and diversify from the Panama Canal to the edge of Alaska. Meanwhile, cruises strengthen their position on the Mediterranean and Baltic Seas and has launched in East Asia from shores of the South China Sea to major rivers. Between continuity and recomposition, the cruise industry faces several challenges such as the limits of overcapacity (more than 6,000 passengers on board), its relationship with the host territories (ports of call), and the renewal of the “cruise” products.
Le tourisme de croisière est un secteur d’activité en pleine expansion (16 millions de passagers en 2011). De nos jours, la croisière reste encore une affaire essentiellement américaine, dominée par les clientèles nord-américaines, et dont le champ spatial privilégié est la mer des Caraïbes. Les circuits américains de la croisière s’étendent et se diversifient, du canal du Panama aux confins de l’Alaska. Parallèlement, la croisière conforte sa position sur les mers méditerranéenne et baltique et se déploie en Asie orientale, des rivages de la mer de Chine aux grands fleuves. Entre permanences et recompositions, l’industrie de la croisière doit relever plusieurs défis tels que les limites du gigantisme (plus de 6 000 passagers à bord), ses relations avec les territoires d’accueil (les ports d’escales), le renouvellement du produit « croisière ».
ISSN: 1779-0980

Droits : http://creativecommons.org/licenses/by-nc/
hal-01368523
https://hal.univ-antilles.fr/hal-01368523
https://hal.univ-antilles.fr/hal-01368523/document
https://hal.univ-antilles.fr/hal-01368523/file/le-tourisme-de-croisiere-dans-le-monde-permanences-et-recompositions%20%281%29.pdf
DOI : 10.4000/etudescaribeennes.5629

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We performed torsional deformation experiments on pre-hydrated fine-grained olivine aggregates using an innovative experimental assembly to investigate water weakening in mantle rocks at high shear strains. San Carlos olivine powder was cold-pressed and then hot-pressed under hydrous conditions, producing aggregates with average grain sizes of 7 or 15 μm. Deformation experiments were performed in a high-resolution gas-medium apparatus equipped with a torsional actuator, under a confining pressure of 300 MPa, a temperature of 1200 °C, and constant shear strain rates ranging from 8 × 10−5 to 1.4 × 10−4 s−1. Maximum shear stresses range from 150 to 195 MPa. These values are 30% lower relative to those determined in previous torsion experiments on dry, fined-grained dunites under similar conditions. Textures and microstructures of the starting and deformed specimens were characterized by scanning and transmission electron microscopy. All deformed aggregates exhibit a shape-preferred orientation marking a foliation and lineation, as well as a reduction in mean grain size from 15 μm down to 3-4 μm due to dynamic recrystallization. Olivine crystallographic fabrics developed rapidly (γ < 0.1), but their strength, characterized by the J-index, is low compared to naturally deformed peridotites or to polycrystalline olivine deformed at similar finite shear strains under dry conditions. The crystallographic fabrics are consistent with deformation by a dislocation accommodated creep mechanism with activation of multiple {0 k l}[1 0 0] systems, among which the (0 1 0)[1 0 0] slip system is dominant, and minor participation of the (0 1 0)[0 0 1] slip system. Transmission electron microscopy confirmed the occurrence of dislocations with [1 0 0] and [0 0 1] Burgers vectors in most grains. Analysis of unpolarized infrared spectra indicates that hydrogen concentration in the olivine lattice is below the saturation level of 18 ppm wt H2O, which is similar to those typically observed in spinel-bearing peridotite xenoliths, and also provide evidence for water-rich inter-granular material trapped in pores and grain boundaries. Seismic properties computed from the CPO observations correspond to those most commonly observed in naturally deformed mantle peridotites with fast P-wave propagation and S-wave polarization subparallel to the shear direction. These torsion experiments on fine-grained olivine polycrystals under hydrous conditions indicate that water weakening under lithospheric conditions is linked to various defects with hydrogen in the olivine structure, as well as with water-derived species in grain boundaries or pores.
ISSN: 0031-9201

hal-00745170
https://hal.archives-ouvertes.fr/hal-00745170
DOI : 10.1016/j.pepi.2012.05.001

Éditeur(s) : Taylor and Francis
Résumé : A new sand-dwelling dinoflagellate species, Cabra reticulata sp. nov., is described from sandy habitats in the south of Brittany (northwestern France). This new species possesses the characteristics of the 'unusual' genus, Cabra Murray et Patterson. The thecal plate formula is Po Pt 3' 1a 4'' 'x' 3c ?s 5''' 1'''' (or alternatively interpreted as Po Pt 4' 0a 4'' 'x' 3c ?s 5''' 1''''). Because of the strong lateral compression, cells of C. reticulata are frequently seen laterally and have a polygonal shape, with three prominent antapical pointed flanges and a dorsal spine in the anterior part of the hypotheca. The cingulum is ascending and incomplete. The thecal surface is ornamented with strong reticulations forming polygonal areolae, which differs from C. matta Murray et Patterson, the type species of the genus. In addition to their different size and shape, a detailed study of C. reticulata by scanning electron microscopy also revealed several different plate features. Plates of the cingulum, c1 and c3, have no reticulations and are ornamented with shallow round areolae, while c2 is only faintly reticulated. Plate 1'''' is also characteristic because dorsally it forms a prominent pointed flange and ventrally bears a peculiar small area of densely arranged pores or tiny areolae. A similar finding has previously been described in Roscoffia capitata Balech. In the description of the genus, it was suggested that Cabra is closely related to species of the genus Roscoffia, and our observations strengthen this hypothesis. Prior to this study, C. reticulata was probably observed in the Virgin Islands, Caribbean Sea, but was tentatively identified as Thecadinium sp. and not fully described. Thus, C. reticulata appears to be present on both sides of the Atlantic Ocean and to occupy benthic habitats in temperate and tropical areas.
European journal of phycology (0967-0262) (Taylor and Francis), 2009-08 , Vol. 44 , N. 3 , P. 415-423

Droits : 2009 Informa plc, Taylor & Francis
http://archimer.ifremer.fr/doc/2009/publication-6804.pdf
DOI:10.1080/09670260902883271
http://archimer.ifremer.fr/doc/00000/6804/

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : El turismo náutico se concibe como un segmento estratégico para el desarrollo turístico de España y sus destinos costeros. En Canarias existe una apuesta pública por la especialización del Archipiélago y su reposicionamiento como destino líder europeo de escala en el Atlántico, por las múltiples cualidades naturales que posee la región para el deporte náutico, y su posición geográfica estratégica en el cruce desde Europa hacia el Caribe. Así, se viene planteando una renovación y desarrollo del sector de la náutica de recreo y el turismo de yates, con estrategias enfocadas a la diversificación y el crecimiento. Los altos costes sociales y medioambientales asociados a este tipo de desarrollo justifican la necesidad de una mayor atención académica, que permita comprender las particularidades y complejidades de la actividad y este mercado turístico. En la misma medida en que esta actividad es vista como un factor de riesgo para el medioambiente, la comunidad local y la franja litoral, también son crecientes las preocupaciones y sensibilidad por parte de los turistas hacia estos fenómenos. Dada la carencia de investigaciones en el área, este estudio se propone identificar los determinantes de la satisfacción de los navegantes europeos con los puertos de escala de Canarias. Como resultado de encuestar a 185 navegantes europeos durante su escala en seis puertos deportivos del archipiélago en 2014 y 2015, y la validación de un sistema de ecuaciones estructurales, se ha podido demostrar, entre otros aspectos, que existe una predilección en el mercado de navegantes europeos por presenciar esfuerzos y políticas de gestión ambiental sostenible en las marinas, siendo éste un factor determinante de su satisfacción. Los hallazgos permiten elaborar una serie de recomendaciones a gestores y operadores turísticos del sector, en aras de contribuir al diseño de estrategias que garanticen un desarrollo más sostenible y razonable de la actividad, basados en el efecto positivo que producen estas estrategias en la demanda, y el potencial valor de diferenciación turística que otorga, en el entorno competitivo del sector.
The nautical activiity has great potential for the socio-economic development of tourism. In Spain, the sector is a priority concern, especially for the Canary Islands, which show a clear commitment to specialise and reposition the destination as a top quality nautical destination on a European level. These aspects, together with the prior experience and tradition these islands have as a stopover destination for vessels in the Atlantic, when crossing Europe towards the Caribbean, represent strengths that have not yet been taken advantage of in the archipelago’s attempt to move away from its image as a traditional sun and beach destination. The Governmental Authorities in the Canary Islands have clear strategies in place to promote the yachting tourism growth. However, renewing the sector is believed to be a difficult process because of the large number of factors that interact within the same. This is a phenomenon of sufficient social and environmental significance to justify academic attention. This research analyses therefore the determinants of the European yachtsmen´s satisfaction with the ports of call of the Canary Islands. Data results of questioning 185 European yachtsmen crossing the Atlantic during 2014 and 2015 reveal that, among other aspects, proper environmental management of marinas leads to an increasing yachtsmen´s satisfaction. The findings provide the opportunity for developing recommendations for tourism managers and practitioners, in the attempt to contribute to a more sustainable and reasoned development and growth in the sector. Based on the current preferences of the European market of yachtsmen, it is possible to assure that environmental and social responsibility policies are a key differentiation factor for the competitiveness of the sector.
Canaries

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.10584
http://journals.openedition.org/etudescaribeennes/10584

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Sedimentary rocks and detrital minerals sample large areas of the continental crust, and they are increasingly seen as a reliable archive for its global evolution. This study presents two approaches to model the growth of the continental crust through the sedimentary archive. The first builds on the variations in U-Pb, Hf and O isotopes in global databases of detrital zircons. We show that uncertainty in the Hf isotope composition of the mantle reservoir from which new crust separated, in the 176Lu/177Hf ratio of that new crust, and in the contribution in the databases of zircons that experienced ancient Pb loss(es), adds some uncertainty to the individual Hf model ages, but not to the overall shape of the calculated continental growth curves. The second approach is based on the variation of Nd isotopes in 645 worldwide fine-grained continental sedimentary rocks with different deposition ages, which requires a correction of the bias induced by preferential erosion of younger rocks through an erosion parameter referred to as K. This dimensionless parameter relates the proportions of younger to older source rocks in the sediment, to the proportions of younger to older source rocks present in the crust from which the sediment was derived. We suggest that a Hadean/Archaean value of K = 1 (i.e., no preferential erosion), and that post-Archaean values of K = 4–6, may be reasonable for the global Earth system. Models built on the detrital zircon and the fine-grained sediment records independently suggest that at least 65% of the present volume of continental crust was established by 3 Ga. The continental crust has been generated continuously, but with a marked decrease in the growth rate at ~ 3 Ga. The period from > 4 Ga to ~ 3 Ga is characterised by relatively high net rates of continental growth (2.9–3.4 km3 yr− 1 on average), which are similar to the rates at which new crust is generated (and destroyed) at the present time. Net growth rates are much lower since 3 Ga (0.6–0.9 km3 yr− 1 on average), which can be attributed to higher rates of destruction of continental crust. The change in slope in the continental growth curve at ~ 3 Ga is taken to indicate a global change in the way bulk crust was generated and preserved, and this change has been linked to the onset of subduction-driven plate tectonics. At least 100% of the present volume of the continental crust has been destroyed and recycled back into the mantle since ~ 3 Ga, and this time marks a transition in the average composition of new continental crust. Continental crust generated before 3 Ga was on average mafic, dense, relatively thin (< 20 km) and therefore different from the calc-alkaline andesitic crust that dominates the continental record today. Continental crust that formed after 3 Ga gradually became more intermediate in composition, buoyant and thicker. The increase in crustal thickness is accompanied by increasing rates of crustal reworking and increasing input of sediment to the ocean. These changes may have been accommodated by a change in lithospheric strength at around 3 Ga, as it became strong enough to support high-relief crust. This time period therefore indicates when significant volumes of continental crust started to become emergent and were available for erosion and weathering, thus impacting on the composition of the atmosphere and the oceans.
ISSN: 0037-0738

hal-01622696
https://hal.archives-ouvertes.fr/hal-01622696
DOI : 10.1016/j.sedgeo.2017.06.001

Éditeur(s) : Springer
Résumé : Terrestrial and marine biodiversity provides the basis for both ecosystems functioning and numerous commodities or services that underpin human well-being. From several decades, alarming trends have been reported worldwide for both biodiversity and ecosystem services. Therefore the sustainable management of biodiversity requires a double viewpoint balancing ecological conservation with the welfare of human societies. Understanding the underlying trade-offs, synergies and interactions imposes the development of interdisciplinary researches and methods. In that respect, bio-economic or ecological economic modeling is likely to play a major role. The present paper intends to elicit the key features, strengths and challenges of bio-economic approaches especially in mathematical and computational terms. It first recall the main bio-economic methods, models and decisional instruments used in these types of analyses. Then the paper shows to what extent bio-economic sustainability lies between equilibrium, viability and optimality mathematical frameworks. It ends up by identifying new major challenges among which the operationalization of ecosystem based management, the precautionary principle and the implementation of governance are especially important. Computational Management Science Computational Management Science Look Inside
Computational Management Science (1619-697X) (Springer), 2013-12 , Vol. 10 , N. 4 , P. 353-364

Droits : Springer-Verlag Berlin Heidelberg 2013
http://archimer.ifremer.fr/doc/00171/28208/26510.pdf
DOI:10.1007/s10287-013-0194-2
http://archimer.ifremer.fr/doc/00171/28208/

Éditeur(s) : HAL CCSD
Résumé : This thesis compiles two distinct studies that both document the control of microstructures on rock seismic properties. The first part deals with the development of crystallographic preferred orientations (CPO) in the uppermost mantle associated with melt/fluid-rock interactions, recorded in peridotites xenoliths from the Japan sea back-arc basin. The microstructural and geochemical characteristics of the studied samples reveal that active spreading is associated to uppermost mantle deformation similar to that observed in the Oman ophiolite. At the onset of back-arc spreading, there are no strong interactions between melt percolation and deformation in comparison to continental rift zones, probably due to the relatively small size and short duration of the spreading event. The second part presents a unique database of plagioclase CPO from variously deformed mafic rocks. CPO are grouped in three main types; their characteristics as a function of deformation regime (magmatic or crystal-plastic) are outlined and discussed. Calculated seismic properties of gabbroic rocks show that anisotropy tends to increase as a function of fabric strength, although it is generally weak, due to the competing effect of olivine/clinopyroxene and plagioclase.
Cette thèse regroupe deux études distinctes, qui documentent le contrôle des microstructures sur les propriétés sismiques des roches. La première partie traite du développement des orientations préférentielles cristallographiques (OPC) dans le manteau supérieur, associé aux interactions liquide/magma-roche, enregistré dans des xénolites de péridotites du bassin d'arrière-arc de la mer du Japon. Les caractéristiques microstucturales et géochimiques des échantillons étudiés montrent que l'ouverture arrière-arc active est associée à une déformation du manteau supérieure similaire à celle observée dans l'ophiolite d'Oman. L'initiation de l'extension d'arrière-arc n'est pas associée à de fortes interactions entre percolation magmatique et déformation, en comparaison avec les zones de rifting continentales, probablement en raison des taille et durée relativement petites de l'épisode d'ouverture. La seconde partie présente une base de données unique d'OPC de plagioclase de roches mafiques plus ou moins déformées. Les OPC sont classées en 3 types principaux; leurs caractéristiques en fonction du régime de déformation (magmatique ou plastique) sont présentées et discutées. Les propriétés sismiques calculées des roches gabbroiques montrent que l'anisotropie tend à croitre avec l'intensité des fabriques, bien qu'elle soit généralement faible, en raison des effets opposés des olivines/clinopyroxènes et du plagioclase.
https://tel.archives-ouvertes.fr/tel-00795505

tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505/document
https://tel.archives-ouvertes.fr/tel-00795505/file/Satsukawa_thesis_UM2.pdf