Éditeur(s) : HAL CCSD
Résumé : International audience
South-east Iran is the site of a rare case of young transition between subduction and collision. We synthesized recent results in geodesy, tectonics, seismology and magnetism to understand the structure and kinematics of the Zagros-Makran transition. Surface observations (tectonics, magnetism and geodesy) draw a transpressive discontinuity consisting of several faults striking obliquely to the convergent plate motion, whereas deeper observations (seismology) support a smooth transition across the fault system. No lithospheric transform fault has been created, even though the transition already behaves like a major boundary in terms of tectonic style, seismic structure, lithology and magnetism. The Zendan-Minab-Palami fault system consists of several faults that accommodate a transpressive tectonic regime. It is the surface expression of a southward propagation of the N-trending right-lateral strike-slip fault system of Jiroft-Sabzevaran. Within each system the numerous faults will coalesce into a single, lithospheric, wrench fault.
ISSN: 0375-6440

hal-00356532
https://hal.archives-ouvertes.fr/hal-00356532
https://hal.archives-ouvertes.fr/hal-00356532/document
https://hal.archives-ouvertes.fr/hal-00356532/file/Regard_MinabSynthese_revised_AvecFigs.pdf
DOI : 10.1144/SP330.4

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The interpretation of coseismic surface deformation measurements through inversion techniques is of major importance to understand the mechanical behaviour of a seismic fault. Dense geodetic data sets in the vicinity of the ruptured fault provide unique constraints on detailed fault geometry and slip distribution at depth, making them complementary to seismological data. Bam earthquake (Mw 6.6, 2003 December 26) induced surface deformation has been precisely mapped by Envisat ASAR interferometry and by subpixel correlation techniques applied to Spot-5 and ASAR amplitude images. These oblique and horizontal estimations of deformation have been completed with one levelling profile along the main road crossing the rupture from west to east. We process these data (separately and jointly) in a two-step inversion technique, within the elastic half-space theory framework. Our objective is to determine the dislocation model at depth that satisfies simultaneously all the geodetic constraints. Also, we estimate the relative contribution of each geodetic data set to this inversion process.We first use a stochastic direct approach called neighbourhood algorithm in order to estimate the average characteristics of the rupture, and their relative uncertainty. Constraining in this way the geometry of the ruptured fault, we then linearize the inverse problem and compute the slip distribution on the fault using a standard weighted least-square technique, assuming the solution is smooth to some degree. At each step, we discuss the optimal models, their stability as well as the relative influence of each data set on the derived models parameters. Our preferred model reveals a shallow dislocation on a quasi-vertical fault, slightly dipping towards east. The slip vector has a strike-slip component as high as 2 m, while the dip-slip component seems negligible.However, the estimation of the resolution matrices emphasizes the fact that the details of deep fault slip distribution remain out of the scope of this ill-conditioned inverse problem. Yet, our preferred model suggests a main dislocation limited at depth between 1 and 6 km. By contrast, the aftershocks observed in the months following the earthquake are located just beneath the estimated main shock.
ISSN: 0956-540X

hal-00314173
https://hal.archives-ouvertes.fr/hal-00314173
https://hal.archives-ouvertes.fr/hal-00314173/document
https://hal.archives-ouvertes.fr/hal-00314173/file/GJI-2007-169-849-briole.pdf
DOI : 10.1111/j.1365-246X.2007.03358.x

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Large earthquakes nucleate at tectonic plate boundaries, and their occurrence within a plate's interior remains rare and poorly documented, especially offshore. The two large earthquakes that struck the northeastern Indian Ocean on 11 April 2012 are an exception: they are the largest strike-slip events reported in historical times1, 2 and triggered large aftershocks worldwide3. Yet they occurred within an intra-oceanic setting along the fossil fabric of the extinct Wharton basin, rather than on a discrete plate boundary4, 5, 6, 7, 8. Here we show that the 11 April 2012 twin earthquakes are part of a continuing boost of the intraplate deformation between India and Australia that followed the Aceh 2004 and Nias 2005 megathrust earthquakes, subsequent to a stress transfer process recognized at other subduction zones9, 10. Using Coulomb stress change calculations, we show that the coseismic slips of the Aceh and Nias earthquakes can promote oceanic left-lateral strike-slip earthquakes on pre-existing meridian-aligned fault planes. We further show that persistent viscous relaxation in the asthenospheric mantle several years after the Aceh megathrust explains the time lag between the 2004 megathrust and the 2012 intraplate events. On a short timescale, the 2012 events provide new evidence for the interplay between megathrusts at the subduction interface and intraplate deformation offshore. On a longer geological timescale, the Australian plate, driven by slab-pull forces at the Sunda trench, is detaching from the Indian plate, which is subjected to resisting forces at the Himalayan front6, 8, 11.
ISSN: 0028-0836

hal-00767569
https://hal.archives-ouvertes.fr/hal-00767569
DOI : 10.1038/nature11520

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Field evidence for syn-deformation migmatization and crystallization along the Karakorum fault contradicts the study of Wang et al. (2012). The ages of such magmatic rocks provide minimum ages for the onset of deformation at similar to 23 Ma in North Ayilari and similar to 19 Ma in Tangtse. The onset of deformation at 12 Ma in the Ayilari range inferred by Wang et al. (2012) from a muscovite Ar/Ar age is a cooling age, thus only a minimum age. The similar to 60 Ma granodiorite bodies, the ophiolitic rocks and the south Kailash thrust that are correlated across the fault to provide a 52 +/- 2 km finite offset do not define reliable piercing points. Such observations as well as our previous work concur to show that the Karakorum fault initiated in the Oligo-Miocene, and has a long-term dextral slip-rate between 7.5 and 13 mm/yr, approximately twice that proposed by Wang et al. (2012).
ISSN: 0012-821X

hal-00829469
https://hal.archives-ouvertes.fr/hal-00829469
DOI : 10.1016/j.epsl.2012.12.012

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : The Great Glen Fault (GGF) is a major lithospheric strike-slip fault system that cuts across the Caledonian orogenic belt of Scotland. It separates the Northern Highlands terrane from the Grampian terrane. Movement history along the fault extends at least into the Early Palaeozoic. The low-temperature history of the Scottish Highlands covers a significant period from the Late Palaeozoic to the Present, but the magnitude of vertical movements that affected the GGF area during that time is still a matter of debate. Fission track analysis on detailed vertical profiles in the Ballachulish and Strontian complexes, as well as on a profile oriented northeastwards across the GGF, reveals distributed differential vertical movements along the fault during the Late Palaeozoic. The Mesozoic denudation is estimated at a maximum of 2 km before a more recent widespread exhumation event that started at around 40–25 Ma, leading to 1.6 to 2 km of erosion. La Great Glen Fault (GGF) est un système décrochant lithosphérique majeur qui traverse la chaîne calédonienne d'Écosse. Il sépare les domaines des Northern Highlands et de Grampian. L'histoire tectonique de ce système remonte au moins au Paléozoïque inférieur. L'histoire de la dénudation des Highlands d'Écosse s'étend du Paléozoïque supérieur jusqu'au Présent, mais l'ampleur des mouvements verticaux ayant affecté la zone autour du système de la GGF pendant cette période est toujours sujette à débat. Les analyses traces de fission réalisées sur des profils verticaux dans les complexes granitiques du Ballachulish et de Strontian, ainsi que sur un profil plus au nord-est à travers la GGF, mettent en évidence des mouvements différentiels distribués de part et d'autre de la faille au Paléozoïque supérieur. La dénudation mésozoïque est estimée au maximum à 2 km, avant un dernier épisode de surrection généralisée à partir de 40–25 Ma, qui provoque environ 1,6 à 2 km d'érosion.
ISSN: 1631-0713

hal-00406583
https://hal.archives-ouvertes.fr/hal-00406583
DOI : 10.1016/j.crte.2006.12.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tapajós Domain in the Amazonian Craton comprises hundreds of gold occurrences mainly hosted by Paleoproterozoic granitic rocks, whose geotectonic evolution and deformation style are poorly understood. The Tocantinzinho granite hosts a large amount of gold, forming the largest gold deposit known in the Tapajós Domain. The Tocantinzinho area is formed by plutonic rocks cut by subvolcanic rocks shallowly emplaced and constrained by NW-SE strike-slip faults, probably in a transtensive site. The magmatism started with the emplacement of huge granodiorite that presently formed the basement country rocks (2007–1997Ma), it was followed by the Tocantinzinho granite magmatism (1989–1979 Ma), and the coeval to late andesite emplacement. Petrological and textural evidence suggest the complex and synchronous occurrence of tectonics and few magmatic events expressed by the emplacement of successive granite, aplite, pegmatite, andesite, and dacite. The magmatic event finished with the cooling of this set of rocks below c. 320 °C, at c. 1950 Ma. The cooling rates vary from c. 3.6–14.7°C/Ma, with an average of 7.5°C/Ma, indicating no important vertical exhumations. The elongated geometry of the Tocantinzinho granite and related rocks, features of solid-state deformation within granites and syntectonic deformation of some andesite dikes imply the existence of wrench type tectonic control. The I-type signature of these rocks, their high-K calc-alkaline and metaluminous to peraluminous affinities combined with the tectonic style indicate a post-collisional tectonic setting. Based on geochemical and structural constrains, the rocks from the Tocantinzinho area are interpreted as a part of the Creporizão Suite and probably represent the first expressions of this syn-to late-tectonic magmatism in the region. A continuous and progressive process of magmatic emplacement controlled by tectonics will be proposed and discussed in conclusion.
ISSN: 0895-9811

hal-01526936
https://hal.archives-ouvertes.fr/hal-01526936
DOI : 10.1016/j.jsames.2017.02.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : HAL CCSD
Résumé : The Firouzkuh Fault in most of its extension is located at the southern side of Firouzkuh Valley in west of the Central Alborz. It is a SW - NE prominent structure with a 70 km long on a sinistral -normal fault. It has been known as a south-dipping reverse fault.Paleoseismic analysis and C14 dating along the Firouzkuh left -lateral strike-slip fault indicate that Central Alborz has been shaken by large earthquakes during the Holocene. Here we present the data carried out of one of the two excavated trenches with 15 m long, 2m wide, ~ 4m deep in the east of Firouzkuh, where we found some evidence for last paleoearthquake associated to seismic re-activity on Firouzkuh Fault in the second trench (F2) that dug across a gauge zone. The last event is evidenced by cutting young superficial deposit where this faulted unit stratigrafically covered alluvium deposits yielded dated human bones fragments. The bones found in 60-70cm-deep of trench which a C14 age of 1159 ± 28 BP. Regarding to estimated slips per event on paleoseismological log of eastern wall of trench F1, event magnitudes for each paleoearthquakes are M≈7.
Geosciences Scientific Quarterly Journal

hal-00800375
https://hal.archives-ouvertes.fr/hal-00800375

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the development and on the distribution of the deformation in the upper mantle and particularly beneath transform plate boundaries. USArray experiment and the remarkable increase of the dataset in California for the past ten years allowed us to scrutinize the lateral variations of the anisotropy in the vicinity of the San Andreas Fault zone. We have confirmed and increased the detection of two layers of anisotropy beneath this plate boundary. The first layer, located in the lithosphere, is related to the deformation induced at the fault, and the other one, located in the asthenosphere, is coherent with the anisotropy observed far from it, its origin is however less clear. We show that the deformation zone associated both to the San Andreas, Calaveras and Hayward Faults, is likely 40 km wide at 70 km depth. We then performed numerical thermomechanical modeling (ADELI) of the displacement of a transform plate boundary associated with the computation of the development of crystallographic fabrics using a viscoplastic selfconsistent approach (VPSC). We analyzed the distribution of the deformation in the model ant looked after the possible interactions at depth between deformation caused at surface by the strike-slip dynamic of the fault and the shearing at the base of the lithosphere caused by the horizontal displacement of the plates. Elastic properties derived from the crystallographic fabrics modeled, show that such interactions exist and induce, beneath the fault zone, a progressive rotation of the crystallographic fabrics with depth. Seismological signature of these smooth rotations is however not relevant with the presence of two anisotropic layers as proposed beneath California. We thus consider that a decoupling zone exists between the lithosphere and the asthenosphere beneath the California to account for the sharp separation between a lithospheric and an asthenospheric deformation. We furthermore estimate that anisotropy observed far form the San Andreas Fault in California cannot be explained only by the drag of the asthenosphere by the North America lithosphere as proposed in our article. Indeed, we can only expect few tenths of second of splitting delay from the anisotropic properties derived from the numerical modeling of a plate moving in the same direction and in the same velocity than the North American lithosphere only for 10 Ma of displacement. As delays observed in California rather reach 1.5 s, anisotropy in this region thus requires the existence of an active asthenospheric flow to be explained.
Le travail réalisé pendant cette thèse a permis d'apporter de nouvelles contraintes sur le développement et la distribution de la déformation dans le manteau supérieur et plus particulièrement au niveau des grandes limites de plaques décrochantes. Grâce à l'apport de l'expérience USArray et d'une dizaine d'années d'enregistrements sismologiques supplémentaires, nous avons pu étudier, de manière précise, les variations d'anisotropie dans le voisinage de la Faille de San Andreas. Nous avons confirmé et étendu l'observation de deux couches anisotropes sous cette limite de plaque. On y observe une première couche localisée dans la lithosphère marquant la déformation induite à la limite de plaque, et une autre, asthénosphérique, cohérente avec l'anisotropie observée loin de la faille et d'origine plus discutée. Nous avons montré que la zone de déformation associée aux failles de San Andreas, Calaveras et d'Hayward a, vraisemblablement, une largeur d'au moins 40 kilomètres en base de lithosphère, sous chacune de ces failles. Nous avons ensuite procédé à la modélisation thermomécanique (ADELI) de la migration d'une limite de plaques décrochante couplée à une modélisation du développement de fabriques cristallographiques par une approche viscoplastique auto-cohérente (VPSC). Ceci nous a permis d'y observer le développement de la déformation et les conséquences des possibles interactions entre la déformation décrochante en surface et le cisaillement en base de lithosphère dû au déplacement horizontal des plaques. Les propriétés élastiques déduites des fabriques cristallographiques modélisées montrent que de telles interactions existent et provoquent, sous la limite de plaques, une rotation des orientations cristallographiques avec la profondeur. Le signal associé à ces rotations progressives n'est toutefois pas cohérent avec la présence de deux couches d'anisotropie comme proposée sous la faille de San Andreas. Nous pensons par conséquent qu'il existe, sous la Californie, une zone de découplage entre la lithosphère et l'asthénosphère, permettant d'individualiser une déformation lithosphérique d'une déformation asthénosphérique. Nous estimons, en outre, que l'anisotropie observée dans l'asthénosphère sous la Californie ne peut être expliquée seulement par le cisaillement induit par le déplacement de la lithosphère Nord Amérique. En effet, les propriétés anisotropes obtenues par modélisation à partir d'une plaque se déplaçant dans une direction et une vitesse proche de celle de la plaque Amérique du Nord montrent qu'on ne peut espérer guère plus que quelques dixièmes de seconde de délai au bout de 10 Ma de déplacement. Les déphasages mesurés en Californie étant de l'ordre de 1,5 s, il est donc nécessaire d'invoquer la présence d'écoulements mantelliques actifs sous cette région.
https://tel.archives-ouvertes.fr/tel-00767124

tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124/document
https://tel.archives-ouvertes.fr/tel-00767124/file/theseBonnin.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The detailed morphology and internal structure of the Calabrian accretionary wedge and adjacent Eastern Sicily margin are imaged in unprecedented detail by a combined dataset of multi-beam bathymetry and high-resolution seismic profiles. The bathymetric data represent the results of 6 recent marine geophysical surveys since 2010 as well as a compilation of earlier surveys presented as a 2 arc-sec (60 m) grid. Several distinct morpho-tectonic provinces are identified including: the deeply incised Malta–Hyblean Escarpment, numerous submarine canyons, broad regions of relatively flat seafloor dominated by fields of sediment waves, the gently undulating anticlinal fold-and-thrust belts of the external Calabrian accretionary wedge and the adjacent portion of the Western Mediterranean Ridge. The Calabrian arc can be divided into 4 domains (from SE to NW): 1) the undeformed Ionian abyssal plain, 2) the external evaporitic wedge, 3) the internal clastic wedge, 4) the Calabrian backstop (Variscan crystalline basement). The Calabrian accretionary wedge can also be divided laterally into two major lobes, the NE- and the SW lobes, and two minor lobes. The kinematics of the limit between the two major lobes is investigated and shown to be sinistral in the external (evaporitic) wedge. A network of radial slip lines within the southernmost external wedge unequivocally demonstrate ongoing dextral displacement of a rigid indenter (representing the corner of the clastic wedge) into the evaporitic wedge thereby confirming the geodynamic model of an active lateral slab tear fault here off eastern Sicily. The slab tear produces a series of major sub-parallel dextral strike-slip faults offshore Mt. Etna and south of the Straits of Messina consistent with the relative motions between Calabria and the Peloritan domain (NE Sicily). Abundant strike-slip faulting, and wide-spread folding and thrusting observed throughout the entire accretionary wedge, indicate regional shortening between the Ionian abyssal plain (foreland) and the Calabrian–Peloritan backstop caused by active subduction.
ISSN: 0012-821X

hal-01523990
https://hal.archives-ouvertes.fr/hal-01523990
DOI : 10.1016/j.epsl.2016.12.020

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
A network of 54 survey GPS sites, 28 continuous GPS stations and three absolute gravity (AG) observation sites have been set up in the Alborz mountain range to quantify the present-day kinematics of the range. Our results allow us to accurately estimate the motion of the South Caspian block (SCB) for the first time, and indicate rotation of the SCB relative to Eurasia, accounting for the left lateral motion in the Alborz range. In light of these new results, it clearly appears that deformation rates vary along the range, the eastern part accommodating mainly left lateral strike slip (2 mm yr(-1) south of the range and 5 mm yr(-1) north of the range) with a very low range normal shortening rate on the Khazar thrust fault (similar to 2 mm yr(-1)), and the western part accommodating range normal shortening (similar to 6 mm yr-1) on the Khazar thrust fault with a left lateral component of similar to 2 mm yr(-1) north of the range and 1 mm yr(-1) south of the range. These present-day kinematics agree with geomorphologic estimated slip rates, but not the long-term deformation, corroborating the idea that the kinematics of the range have changed recently due to the change of SCB motion.;Modelling of the interseismic deformation suggests a deep locking depth on the central-western segment of the Khazar fault (similar to 30 km) in agreement with the Baladeh earthquake rupture and aftershock ranging between 10 and 30 km. Given this unusual deep locking depth and the 34 degrees dip of the thrust, a large part of the Alborz range is located above the seismically coupled part of the fault. Based on our AG measurements this part of the range seems to uplift at a rate of 1-5 mm yr(-1), in agreement with terrace uplift.
ISSN: 0956-540X

hal-00617146
https://hal.archives-ouvertes.fr/hal-00617146
https://hal.archives-ouvertes.fr/hal-00617146v2/document
https://hal.archives-ouvertes.fr/hal-00617146/file/djamour2010.pdf
DOI : 10.1111/j.1365-246X.2010.04811.x

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Detailed seafloor mapping in the area east of Taiwan revealed trench-parallel stretching and folding of the Ryukyu forearc and lateral motion of the accretionary wedge under oblique convergence. East of 122ø40'E, a steep accretionary wedge is elongated in an E-W direction. A major transcurrent right-lateral strike-slip fault accommodates the strain partitioning caused by an oblique convergence of 40 ø. A spectacular out-of-sequence thrust may be related to the subduction of a structural high lying in the axis of the N-S trending Gagua Ridge. This asperity is likely responsible for the uplift of the accretionary wedge and forearc basement and may have augmented strain partitioning by increasing the coupling between the two plates. West of 122ø40'E, the low-taper accretionary wedge is sheared in a direction subparallel to the convergence vector with respect to the Ryukyu Arc. The bayonet shape of the southern Ryukyu Arc slope partly results from the recent (re)opening of the southern Okinawa Trough at a rate of about 2 to 4 cm/yr. Right-lateral shearing of the sedimentary forearc with respect to the nonlinear Ryukyu backstop generates trench-parallel extension in the forearc sediment sequence at dilational jogs and trench-parallel folding at compressive jogs. The Hoping Basin lies above a diffuse trench/trench/fault (TTF) or TFF unstable triple junction moving toward the south along a N-S transform zone which accommodates the southward drift of the Ryukyu Arc with respect to Eurasia.
ISSN: 0278-7407

hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555/document
https://hal.archives-ouvertes.fr/hal-01261555/file/Lallemand_et_al-1999-Tectonics.pdf
DOI : 10.1029/1998TC900011

Éditeur(s) : HAL CCSD Elsevier
Résumé : Displacement-length data from faults, joints, veins, igneous dikes, shear deformation bands, and compaction bands define two groups. The first group, having a power-law scaling relation with a slope of n = 1 and therefore a linear dependence of maximum displacement and discontinuity length (D-max = gamma L), comprises faults and shear (non-compactional or non-dilational) deformation bands. These shearing-mode structures, having shearing strains that predominate over volumetric strains across them, grow under conditions of constant driving stress, with the magnitude of near-tip stress on the same order as the rock's yield strength in shear. The second group, having a power-law scaling relation with a slope of n = 0.5 and therefore a dependence of maximum displacement on the square root of discontinuity length (D-max = alpha L-0.5), comprises joints, veins, igneous dikes, cataclastic deformation bands, and compaction bands. These opening- and closing-mode structures grow under conditions of constant fracture toughness, implying significant amplification of near-tip stress within a zone of small-scale yielding at the discontinuity tip. Volumetric changes accommodated by grain fragmentation, and thus control of propagation by the rock's fracture toughness, are associated with scaling of predominantly dilational and compactional structures with an exponent of n = 0.5.
ISSN: 0191-8141

hal-00411173
https://hal.archives-ouvertes.fr/hal-00411173
DOI : 10.1016/j.jsg.2008.08.001

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We performed forward modelling of seismic anisotropy beneath a migrating strike-slip plate boundary to: (1) test if such a geodynamic context might explain teleseismic shear wave splitting data in the vicinity of the central part of the San Andreas Fault and (2) constrain the power of such data to unravel vertical and lateral variations in deformation patterns in the upper mantle. The modelling involves five steps: (1) thermomechanical modelling, using a finite-element code, of the deformation field, (2) viscoplastic self-consistent modelling of the resulting olivine and pyroxene crystal preferred orientations, (3) calculation of the elasticity tensors for different domains of the finite elements (FEs) model, (4) forward modelling of seismic wave propagation through the model using ray theory, finite-frequency theory and a full-wave approach and (5) performing splitting measurements on the synthetic seismograms. SKS splitting data in central California are best fitted by a model with a hotter geotherm within 60 km of the plate boundary accounting for the opening of an asthenospheric window due to the northward migration of the Mendocino Triple Junction. The westward motion of the plate boundary cannot however explain the rotation of fast polarization directions east of the San Andreas Fault in central California. Comparison between modelled and measured individual shear wave splitting also implies that the homogeneity of the two-layer models accounting for the observations in the vicinity of the San Andreas Fault indicates a sharp transition between lithospheric and asthenospheric deformations beneath this plate boundary. The ability of different synthetic approaches to localize horizontally and vertically the plate boundary-related deformation differs significantly. Splitting in ray theory synthetics closely follow variations in olivine crystallographic preferred orientations in the model. In contrast, splitting analysis on full-wave synthetics, which should be more representative of actual long-period SKS waves, results in smooth apparent lateral variations of anisotropy; the exact location and width of the plate boundary may only be retrieved by comparing fast-polarization profiles obtained using a multichannel analysis on waves with different periods.
ISSN: 0956-540X

hal-01236150
http://hal.univ-reunion.fr/hal-01236150
http://hal.univ-reunion.fr/hal-01236150/document
http://hal.univ-reunion.fr/hal-01236150/file/Bonnin_San_Andreas_modelling_GJI2012.pdf
DOI : 10.1111/j.1365-246X.2012.05650.x

Éditeur(s) : Elsevier
Résumé : We present new results from the MARADJA'03 cruise depicting the geological structures offshore central and western Algeria. Using swath bathymetry and seismic reflection data, we map and discuss the offshore limits of the Internal Zones corresponding to relics of the AIKaPeCa domain that drifted and collided the African plate during the Miocene. We identify large reverse faults and folds that reactivate part of these limits and are still active today. The morphology of the westernmost NE-SW margin suggests a former strike-slip activity accommodating a westward block translation responsible for the shift of the Internal Zones towards the Moroccan Rif.
Nous présentons les résultats récents de la campagne MARADJA'03, qui visent à mettre en évidence les structures géologiques dans le domaine marin au nord-ouest de l'Algérie. Grâce aux données de bathymétrie multifaisceau et de sismique réflexion, nous cartographions et discutons les limites en mer des Zones internes correspondant aux reliques du domaine AlKaPeCa qui a dérivé, puis est entré en collision avec la plaque africaine au Miocène. De grandes failles inverses et plis, actifs dans le champ de contrainte actuel, réactivent certaines de ces limites. La marge ouest-algérienne, orientée NE¿SW, indique la présence d'une ancienne activité en décrochement ayant accommodé la translation des Zones internes vers l'ouest.
Comptes Rendus Geoscience (1631-0713) (Elsevier), 2006 , Vol. 338 , N. 1-2 , P. 80-91

Droits : 2005 Académie des sciences Published by Elsevier SAS
http://archimer.ifremer.fr/doc/2006/publication-1211.pdf
DOI:10.1016/j.crte.2005.11.009
http://archimer.ifremer.fr/doc/00000/1211/

Éditeur(s) : Gauthier-villars
Résumé : The aim of the 20 Nautile dives of the recent Kanaut cruise was the study of the Kane Fracture Zone from its intersection with the Mid-Atlantic Ridge up to 80 km to the west. The dives have been conducted along four massifs located along the southern wall of the fracture valley. The flanks of the massifs consist of slightly tilted peridotites, gabbros and basalts, which have been exposed along normal and strike-slip major faults. No dike complex similar to that observed along the ZF Vema was observed The observed sections show pervasive cataclastic deformation and greenschist-facies metamorphic overprint.
Lors de la récente campagne Kanaut du Nautile (novembre-décembre 1992), 20 plongées ont eu pour objectif I’étude du mur sud de la Zone de fracture Kane, depuis son intersection orientale avec la dorsale médio-Atlantique jusqu’h environ 80 km de celle-ci. Les plongées réalisées SUT quatre massifs successifs bordant la vallée transformante, permettent d’observer des sections comprenant des péndotites, des gabbros et des basaltes, mis 21 l’affleurement B la faveur d’accidents normaux décrochants et d’un léger basculement. Les coupes observées ne montrent pas de complexe filonien épais, comme celui observé le long de la ZF Vema par exemple. L’ensemble de ces séries est fortement cataclasé et métamorphisé dans le facies des schites verts.
Comptes Rendus de l'Academie des Sciences Serie II (1251-8069) (Gauthier-villars), 1993-12 , Vol. 317 , N. 12 , P. 1641-1648

Droits : Académie des Sciences
http://archimer.ifremer.fr/doc/00183/29470/27886.pdf
http://archimer.ifremer.fr/doc/00183/29470/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The eastern margin of the Tibetan Plateau is a key region to understand the formation and tectonic evolution of the plateau. Most studies concentrated on the Longmen Shan range that corresponds to the tectonically very active boundary between the Tibetan Plateau and the Sichuan Basin. This work addresses the deformation and exhumation pattern in the poorly understood metamorphic Danba dome situated at the conjunction between the southern Longmen Shan range and the major strike-slip Xian Shui He fault. The Early Mesozoic and Cenozoic evolution of the dome are then compared to the regional evolution of eastern Tibet. The about 830 Ma zircon U–Pb ages obtained on the Gezong and Gongcai gneiss as well as U–Pb ages on inherited zircons in the Early Mesozoic granites confirm the occurrence of Neo-Proterozoic magmatic episodes in the Danba basement at 800–900 Ma and 650–750 Ma. Following the closure of the Palaeotethys Ocean, granitoids were emplaced in the Danba metamorphic basement and Triassic cover from about 230 Ma to about 170 Ma. The western part of the Lian He Kau granitic massif, emplaced (between 210 and 200 Ma) within the Triassic cover sequence of the dome was only slightly affected by the Early Mesozoic deformation. However, in the eastern, deeper level compartment of the massif, ductile deformation occurred between 200 and 190 Ma, contemporaneous with the onset of the Barrovian-type metamorphism dated at 200–180 Ma. That deformation is compatible with the Early Mesozoic deformation observed in the Longmen Shan range and with the development of the large-scale décollement level in the Songpan Garzê area. Apatite fission track data then indicate that, following the Oligocene–Middle Eocene onset of eastward motion of the Songpan Garzê terrane, the Danba dome developed as a crustal-scale antiform during the Late Miocene–Early Pliocene (10–4 Ma). The exhumation was controlled by the Lian He Kau fault (a major transpressive structure parallel to the Xian Shui He fault) and the associated Manai thrust faults. Regionally, while the Oligocene–Middle Miocene exhumation phase seems to have been of regional extent, the Late Miocene to Present day phase is localised along the Longmen Shan range thrusts as well as along the back-thrusts formed by the Lian He Kau, Manai and associated faults.
ISSN: 0743-9547

insu-01117657
https://hal-insu.archives-ouvertes.fr/insu-01117657
DOI : 10.1016/j.jseaes.2015.02.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The brittle structures of a Hercynian granite (La Borne, French Massif Central) observed at several scales, from regional to microscopic, are presented and interpreted on mechanical terms. Emphasis is placed on strike slip faults, joints, and cracks related to incipient shear fracturing during horizontal compression. Three compressive tectonic phases have been identified according to their brittle structures and characterised by the burial depth at the time of their generation.The two first phases (H1, H2) are Hercynian and occurred while the granite was deeply buried (∼5 to 3 km depth) whereas the last phase (P) is Pyrenean and occurred at very low depth. The geometric organizations of cracks, joints and faults are clearly similar at various scales from about 10 μm to several m.These field observations are strong arguments for the occurrence of shear structures at microscopic to macroscopic scales during tectonic events. Following this inference, it is proposed that, at least in the case of Hercynian phases, cracks, joints and macroscopic strike slip faults have been generated by the same mechanical process under high overburden weight. Therefore, incipient fractures seem to be generated as shearing structures and to evolve by coalescence with neighbouring ones with the same direction.
ISSN: 0191-8141

hal-01115718
https://hal.archives-ouvertes.fr/hal-01115718
DOI : 10.1016/j.jsg.2014.05.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present results of a geomorphological and morphotectonic analysis of the northeastern part of the Rif. We show that the present day kinematics of the Rif is characterized by active deformation along the Trougout and Nekor faults in the North-East. Digital Elevation Models of offset drainage features (streams, fluvial terraces) allow determining a normal-left-lateral motion along the Trougout fault and a left-lateral strike-slip motion along the Nekor fault. Preliminary 3He cosmogenic dates of tectonic markers yield vertical and horizontal slip rates of ∼0.9 mm/yr and ∼0.5 mm/yr, respectively along the Trougout fault. The present-day localized transtension seen in the north-eastern Rif morphology (Ras Tarf) is coeval with uplifted marine terraces near the Al Hoceima Bay. U/Th dating of shells yield an average uplift rate of ∼0.2 mm/yr during the past 500 ka. These data show that active transtension in the northeastern Rif is also associated with uplift. These new morphotectonic constraints are consistent with the GPS measurements showing southwestward overall motion of most of the Rif belt with respect to stable Africa.
ISSN: 0264-3707

hal-01053492
https://hal.archives-ouvertes.fr/hal-01053492
DOI : 10.1016/j.jog.2014.01.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mongolia represents the northernmost area affected by the India–Asia collision, and it is actively deformed along transpressive belts closely associated with large-scale strike-slip faults. The active and past mantle flow beneath this region is, however, poorly known. In order to investigate deep mantle deformation beneath central Mongolia and its relation with the surrounding major structures such as the Siberian craton, the Gobi–Altay belt and the Baikal rift, a NS-trending profile of broadband seismic stations has been deployed in the summer 2003 from the southern Siberian craton to the Gobi–Altay range, crossing the entire Hangay dome. Mantle flow is deduced from the splitting of teleseismic shear waves such as SKS phases. In eastern Mongolia, the permanent station ULN in Ulaanbaatar reveals the presence of two anisotropic layers, the upper one being oriented NE–SW, close to the trend of lithospheric structures and the lower one NW–SE, close to the trend of Eurasia absolute plate motion. Along the NS profile in central Mongolia, seismic anisotropy deduced from SKS splitting reveals a homogeneous NW–SE trending structure, fully consistent with the observations made in the Altay–Sayan in western Mongolia. The observed delay times of 1.5 to more than 2.0 s favor consistent mantle flow over large mantle thicknesses. Since the lithosphere is less than 100 km thick beneath central Mongolia and since the observed fast directions are parallel to the trend of the lithospheric structures but also close to the trend of the absolute plate motion, we propose that both the lithosphere and the asthenosphere may join their anisotropic effects beneath central Mongolia to explain the large delay times. Although GPS vectors represent the instantaneous displacement of the Earth's surface and SKS splitting the time and vertical integration of finite strain at depth, we use the opportunity of the dense geodetic measurements available in this region to discuss the anisotropy pattern in term of present-day deformation. In the Eurasia-fixed reference frame, GPS and SKS both depict a similar trend beneath central Mongolia, suggesting a lithospheric block “escaping” toward the east that could orient olivine a-axes in the upper mantle, within a transpressive tectonic regime. A different behaviour is observed in western Mongolia: the GPS vectors trend NS, close to the regional compression direction, whereas the fast SKS directions trend EW, suggesting a tectonic regime close to a mode of axial shortening, generating the development of an EW-trending foliation at depth. We therefore propose that Mongolia is a place where active and frozen lithospheric deformation may add their effects, together with the sublithospheric flow. In the three sources of anisotropy inferred, a fundamental role is played by the Siberian craton that acted as an undeformable core of the continent through time: the frozen Paleozoic and Mesozoic structures wrap around the craton, building up the fast anisotropic direction pattern; the present-day sublithospheric flow induced by the plate motion is likely deflecting around its deep roots; finally, the present-day tectonic regime appears to be controlled by the presence of the craton to the north.
ISSN: 0012-821X

hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853/document
https://hal.archives-ouvertes.fr/hal-00407853/file/Barruol_SKS_Mongolia_EPSL2008_hal.pdf
DOI : 10.1016/j.epsl.2008.07.027