Éditeur(s) : HAL CCSD Landes Bioscience
Résumé : International audience
In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
Autophagy

hal-00735751
https://hal.archives-ouvertes.fr/hal-00735751
PUBMED : 22966490

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
We present an improvement of the maximum intersection (MAXI) method in which absolute earthquake location is defined by the maximum intersection number of hyperbolic equal differential time (EDT) volumes (one EDT volume being described as all grid nodes satisfying the arrival‐time differences between two stations, ± a tolerance value known as TERR). This 3D technique is well adapted to a strongly heterogeneous environment, avoids the depth versus origin‐time trade‐off (even using P arrivals alone), and objectively filters possible erroneous arrival times. Improvements consist of introducing an iterative multiscale approach on the TERR parameter and conducting a hierarchy of grid discretization to refine the preliminary solution (multigrid algorithm). The outlier cleaning process is strengthened by conducting statistical analyses based on the number of EDT volume intersections per station, rather than on travel‐time residues. Processing two series of synthetic arrival times computed in the 3D seismological configuration of the southernmost Ryukyu subduction zone, offshore Taiwan, allows us to (1) confirm MAXI robustness, even when arrival times are highly disturbed or azimuthal coverage largely reduced, and (2) show that MAXI, by limiting trade‐offs between origin time and depth and between epicentral position and depth, is less affected by a wrong velocity model than a technique that minimizes travel‐time residues. To conclude, we apply the MAXI method to locate earthquakes recorded by the combined Central Weather Bureau of Taiwan (CWB) and the Japanese Meteorological Agency (JMA) networks (1991-2008) within a georealistic a priori 3D P‐velocity model. Hypocenter determinations are selected based on MAXI confidence factors, and earthquake clustering along well‐known tectonic features witnesses hypocenter determination accuracy.
ISSN: 0037-1106

hal-00725227
https://hal.archives-ouvertes.fr/hal-00725227
DOI : 10.1785/0120100311

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] Zircons and monazites from 6 samples of the North Ayilari dextral shear zone (NAsz), part of the Karakorum fault zone (KFZ), have been dated with the U-Th-Pb method, using both ID-TIMS and SIMS techniques. The ages reveal (1) inheritance from several events spanning a long period between the late Archean and the Jurassic; (2) an Eocene-Oligocene magmatic event (similar to 35-32 Ma); (3) an Oligo-Miocene magmatic event (similar to 25-22 Ma), at least partly synkinematic to the right-lateral deformation; and (4) a period of metamorphism metasomatism (similar to 22-14 Ma) interpreted as thermal and fluid advection in the shear zone. The Labhar Kangri granite located similar to 375 km farther Southeast along the KFZ is dated at 21.1 +/- 0.3 Ma. Such occurrence of several Oligo-Miocene granites along the KFZ, some of which show evidence for synkinematic emplacement, suggests that the fault zone played an important role in the genesis and /or collection of crustal melts. We discuss several scenarios for the onset and propagation of the KFZ, and offset estimates based on the main sutures zones. Our preferred scenario is an Oligo-Miocene initiation of the fault close to the NA range, and propagation along most of its length prior to similar to 19 Ma. In its southern half, the averaged long-term fault-rate of the KFZ is greater than 8 to 10 mm/a, in good agreement with some shorter-term estimates based on the Indus river course, or Quaternary moraines and geodesy. Our results show the KFZ cannot be considered as a small transient fault but played a major role in the collision history.
ISSN: 0278-7407

hal-00412570
https://hal.archives-ouvertes.fr/hal-00412570
DOI : 10.1029/2007TC002184

Éditeur(s) : HAL CCSD Wiley/Blackwell
Résumé : 4 pages
International audience
This article documents the addition of 268 microsatellite marker loci to the Molecular Ecology Resources Database. Loci were developed for the following species: Alburnoides bipunctatus, Chamaerops humilis, Chlidonias hybrida, Cyperus papyrus, Fusarium graminearum, Loxigilla barbadensis, Macrobrachium rosenbergii, Odontesthes bonariensis, Pelteobagrus vachelli, Posidonia oceanica, Potamotrygon motoro, Rhamdia quelen, Sarotherodon melanotheron heudelotii, Sibiraea angustata, Takifugu rubripes, Tarentola mauritanica, Trimmatostroma sp. and Wallago attu. These loci were cross-tested on the following species: Alburnoides fasciatus, Alburnoides kubanicus, Alburnoides maculatus, Alburnoides ohridanus, Alburnoides prespensis, Alburnoides rossicus, Alburnoides strymonicus, Alburnoides thessalicus, Alburnoides tzanevi, Carassius carassius, Fusarium asiaticum, Leucaspius delineatus, Loxigilla noctis dominica, Pelecus cultratus, Phoenix canariensis, Potamotrygon falkneri, Trachycarpus fortune and Vimba vimba.
ISSN: 1755-098X

hal-00823716
https://hal.archives-ouvertes.fr/hal-00823716
DOI : 10.1111/1755-0998.12095
PUBMED : 23521844

Éditeur(s) : Springer
Résumé : We present the global general circulation model IPSL-CM5 developed to study the long-term response of the climate system to natural and anthropogenic forcings as part of the 5th Phase of the Coupled Model Intercomparison Project (CMIP5). This model includes an interactive carbon cycle, a representation of tropospheric and stratospheric chemistry, and a comprehensive representation of aerosols. As it represents the principal dynamical, physical, and bio-geochemical processes relevant to the climate system, it may be referred to as an Earth System Model. However, the IPSL-CM5 model may be used in a multitude of configurations associated with different boundary conditions and with a range of complexities in terms of processes and interactions. This paper presents an overview of the different model components and explains how they were coupled and used to simulate historical climate changes over the past 150 years and different scenarios of future climate change. A single version of the IPSL-CM5 model (IPSL-CM5A-LR) was used to provide climate projections associated with different socio-economic scenarios, including the different Representative Concentration Pathways considered by CMIP5 and several scenarios from the Special Report on Emission Scenarios considered by CMIP3. Results suggest that the magnitude of global warming projections primarily depends on the socio-economic scenario considered, that there is potential for an aggressive mitigation policy to limit global warming to about two degrees, and that the behavior of some components of the climate system such as the Arctic sea ice and the Atlantic Meridional Overturning Circulation may change drastically by the end of the twenty-first century in the case of a no climate policy scenario. Although the magnitude of regional temperature and precipitation changes depends fairly linearly on the magnitude of the projected global warming (and thus on the scenario considered), the geographical pattern of these changes is strikingly similar for the different scenarios. The representation of atmospheric physical processes in the model is shown to strongly influence the simulated climate variability and both the magnitude and pattern of the projected climate changes.
Climate Dynamics (0930-7575) (Springer), 2013-05 , Vol. 40 , N. 9-10 , P. 2123-2165

Droits : The Author(s) 2013. This article is published with open access at Springerlink.com
http://archimer.ifremer.fr/doc/00138/24966/23079.pdf
DOI:10.1007/s00382-012-1636-1
http://archimer.ifremer.fr/doc/00138/24966/

Éditeur(s) : HAL CCSD Elsevier
Résumé : Handheld energy dispersive portable X-ray spectrometers (pXRF) are generally designed and used for qualitative survey applications. We developed shipboard quantitative analysis protocols for pXRF and employed the instrument to make over 2000 individual abundance measurements for a selection of major and trace elements on over 1200 m of recovered core during the eight weeks of the International Ocean Discovery Program (IODP) Expedition 352 to the Izu-Bonin forearc. pXRF analytical performance, accuracy and precision were found to be the same on powdered rock samples and on freshly cut rock surfaces, and sample results were similar within error to measurements made via shipboard ICP-OES analysis save at low abundance levels for a few elements. Instrument performance was optimal for elements between Z = 19 and Z = 40, and the system yielded reproducible data for K, Ca, Ti, V, Cr, Mn, Fe, Cu, Zn, Rb, Sr, and Zr on both powdered samples and rock surfaces. Working curves developed via pXRF measurement of a suite of geologic standard reference materials and well-characterized lavas permitted accurate quantitative measurements for many of the examined elements on both sample powders and rock surfaces. Although pXRF has been sporadically employed on previous cruises, Expedition 352 is the first time a detailed, high-density chemostratigraphy of recovered core samples was collected using pXRF measurements of rock core surfaces. These high-resolution data allowed the recognition of chemically distinct eruptive units in near real-time. The rapid identification of geochemical trends vastly improved our selection of samples for shipboard and shore-based analysis, permitted a more comprehensive interpretation of our Expedition results, and provided key decision-making information for drilling operations.
ISSN: 0009-2541

hal-01553188
https://hal.archives-ouvertes.fr/hal-01553188
DOI : 10.1016/j.chemgeo.2017.01.007

Éditeur(s) : HAL CCSD Editions Paralia CFL
Résumé : Barrier island hydro-morphodynamics driven by typhoon events are the major concern of the project KUNSHEN (2011-2014). It aims at providing for a deep understanding of the peculiar dynamics of sand barriers where extreme events such as typhoons have a significant impact. We present the campaigns and the protocols achieved and planned in the project, on the Wan-tzu-liao sand barrier, Cigu Lagoon, Tainan, Taiwan, from October 2011 to January 2012, during the winter storm season and during summer 2012 during the typhoon season. A set of current profilers are deployed along a cross shore transect at 7, 4 and 2 meters deep. On the Wan-tzu-liao sand barrier, 3 columns of 3 pressiometers are deployed to survey the submersion. In the same time, morphological surveys are performed on the sand barrier with DGPS to analyse any change in the shoreline position, the beach slope, and the dynamics of sand beach features. A very preliminary analysis on these on-going field surveys suggests that the word "extreme" refers more to the consequence of the forcing on the sand barrier than the intensity of the forcing itself. The strategy developed in this first step will be refined to survey the next typhoon season, from May 2012 to October 2012.
ISSN: 1760-8716

hal-00854411
https://hal.archives-ouvertes.fr/hal-00854411
DOI : 10.5150/jngcgc.2012.034-M

Éditeur(s) : HAL CCSD
Résumé : The Karakorum Fault zone (KFZ), lying in the west of the Tibetan plateau, is an important dextral strike-slip fault and the important northern geological boundary of the west Himalaya. In the AyilaRi' gyu Range-Gai Basin area lying in the southeast of the KFZ, Ar-40/Ar-39 thermochronologic analysis was performed on the syn-tectonic minerals in the, metamorphic rocks in the Karakorum ductile shear zone, with the base of petrology and deformation structure researches. According to the microstructure features, the minerals in the shear zone recorded the continuous deformation from high ( > 600 degrees C) to low temperature ( < 250 degrees C) appeared as that the nearly horizontal dextral shearing has transformed into the oblique dextral normal slip, made the greenschist facies of deformation stack oil the early medium-high temperature deformation, indicated the uplift during the slip. The thermochronologic revealed the continuous shear process from the early Miocene to 4Ma at least, which containing three rapid cooling stage: from 25 similar to 22Ma to 21 similar to 18Ma, the deformation locally stopped or slower in the, shallow high temperature shear process; from 15Ma to 12Ma, the rapid uplift of the AyilaRi' gyu Range, the initial formation of the Gar Basin together with the main deep incision of river during the strip-slip of the KFZ; since 9Ma, the AyilaRi' gyu Range has increased the rapid uplift and the Gar Basin has formed finally. According to the different levels of deformation and the dextral displacement of the surface landform with different ages, the long term slip rate and the uplift rate indicated the intense dextral strike slip and uplift associated since the late Quarternary Period.
Acta Petrologica Sinica

hal-00411572
https://hal.archives-ouvertes.fr/hal-00411572

Éditeur(s) : HAL CCSD SAGE Publications (UK and US)
Résumé : International audience
Amelogenin gene organization varies from 6 exons (1,2,3,5,6,7) in amphibians and sauropsids to 10 in rodents. The additional exons are exons 4, 8, 9, and ``4b'', the latter being as yet unidentified in AMELX transcripts. To learn more about the evolutionary origin of these exons, we used an in silico approach to find them in 39 tetrapod genomes. AMEL organization with 6 exons was the ancestral condition. Exon 4 was created in an ancestral therian (marsupials + placentals), then exon 9 in an ancestral placental, and finally exons ``4b'' and 8 in rodents, after divergence of the squirrel lineage. These exons were either inactivated in some lineages or remained functional: Exon 4 is functional from artiodactyls onward; exon 9 is known, to date, only in rodents, but could be coding in various mammals; and exon ``4b'' was probably coding in some rodents. We performed PCR of cDNA isolated from mouse and human tooth buds to identify the presence of these transcripts. A sequence analogous to exon ``4b'', and to exon 9, could not be amplified from the respective tooth cDNA, indicating that even though sequences similar to these exons are present, they are not transcribed in these species.
ISSN: 0022-0345

hal-01545487
https://hal.archives-ouvertes.fr/hal-01545487
DOI : 10.1177/0022034511423399

Éditeur(s) : HAL CCSD SpringerOpen
Résumé : The Karakorum Fault zone (KFZ) plays an important role in understanding the formation, evolvement and deformation of the Tibetan Plateau. The high-T dextral shearing metamorphic rocks, e.g., mylonites or mylonitized gneisses-granites, locally crop out along the southeastern part of the KFZ in the Ayila Ri'gyü Range area. The SHRIMP U-Pb dating of the syn-kinematic crystallized zircons indicates that the initial age of the KFZ is ∼27 Ma, ∼10 Ma older than previous results. The extensive high-T dextral shearing along the KFZ started at least at 27–20 Ma, accompanied by the syn-kinematic emplacement of leuco-granites. Deformation and concomitant fluid circulation during shearing most likely occurred as early as at 25–13 Ma. The KFZ probably grew from southeast to northwest along the fault as a result of continuous convergence between the India plate and Eurasia plate.
ISSN: 1001-6538

hal-00406402
https://hal.archives-ouvertes.fr/hal-00406402
DOI : 10.1007/s11434-007-0164-6

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ryukyu subduction is known to generate very few earthquakes in its central segment contrarily to its two extremities. We focus in this study on the southernmost part of the Ryukyu subduction zone offshore east Taiwan. Our first task was to build a homogeneous earthquake catalogue for the period 1900–2007. The new catalogue provides homogenized M′W magnitudes and shows that several M′W≥ 7.0 earthquakes occurred offshore Hualien and Suao cities. We then focused on the 1920 June 5 earthquake (reported surface wave magnitude 8.1) previously located beneath the accretionary prism. The revised moment magnitude has been estimated in our catalogue at 7.7 ± 0.2. It is the biggest earthquake ever recorded in the Taiwan area but the fault that has produced this earthquake has not yet been identified with confidence. We relocated this event using regional phases (seismological bulletins archived at the Central Weather Bureau of Taiwan) about 50 km NNE and shallower of its former location, that is, within the Ryukyu Arc basement. According to earthquake bulletin information, revised magnitude, new hypocentral determination and known regional faults, we propose four potential active faults as candidates for the slip associated to this event: (1) the interplate seismogenic zone (ISZ), (2) an out-of-sequence thrust cutting through the forearc and branching on the ISZ, (3) a NS strike-slip fault cutting through the Ryukyu arc and (4) a N–S, westward dipping thrust fault, affecting the Philippine Sea Plate east of the Luzon Arc. The best compromise is to consider a rupture along the ISZ with a shallow nucleation possibly along a splay-fault followed by a downward and lateral propagation of the rupture that would explain the lack of significant seafloor motion and subsequent tsunami. We also estimate the maximum seismic coupling of the ISZ in the region east of Taiwan to about 0.4. In parallel, the evidences of aseismic slip occurring along the ISZ allow us to conclude that this region should only be affected by M < 8 earthquakes.
ISSN: 0956-540X

hal-00545459
https://hal.archives-ouvertes.fr/hal-00545459
https://hal.archives-ouvertes.fr/hal-00545459/document
https://hal.archives-ouvertes.fr/hal-00545459/file/theunisseGJI2010.pdf
DOI : 10.1111/j.1365-246X.2010.04813.x

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
New magnetotelluric and receiver transfer function studies provide insights from the upper to the lower crust of the eastern Betic Cordillera, which is deformed by large folds, normal faults, and a major transcurrent left-lateral fault, the Carboneras Fault Zone (CFZ). Receiver function analysis determines a NNW dipping Moho reaching 20 degrees that increases in depth, from 20 km south of the CFZ up to 34 km in the Sierra de Los Filabres. In addition, seismic discontinuities determined in the upper crust are interpreted as major contacts between metamorphic complexes that are detached and folded. The MT inversion model reveals a conductive zone, also representing a crustal seismic discontinuity, associated with the Alpujarride/Nevado-Filabride contact and fitting the N vergent geometry of the Sierra Alhamilla antiform. A small flexure at Moho coincides with the CFZ, as revealed by the Bouguer anomaly trend, in agreement with the receiver function results. Moreover, the Bahr strike and tipper angle at the stations placed closest to the CFZ clearly reveal the continuity of the CFZ at least down to approximately 15 km in depth, crossing all the detected crustal discontinuities up to the Moho. The lack of a clear Moho offset associated with the Carboneras Fault supports the idea that some large strike-slip faults tend to accommodate the deformation by a broadening fault zone at lower crustal levels. Its nucleation could occur at the base of a thin crust, where melting processes critically reduced the lithospheric strength during the late Miocene, to then propagate upward, reaching the topographic surface. Northward, the lithosphere comprised moderately larger strength, and the crustal discontinuities favored the development of larger folds with kilometric amplitude instead of strike-slip faults since the late Miocene.
ISSN: 1525-2027

hal-00671024
https://hal.archives-ouvertes.fr/hal-00671024
DOI : 10.1029/2010GC003274

Éditeur(s) : HAL CCSD Wiley/Blackwell
Résumé : International audience
This article documents the addition of 512 microsatellite marker loci and nine pairs of Single Nucleotide Polymorphism (SNP) sequencing primers to the Molecular Ecology Resources Database. Loci were developed for the following species: Alcippe morrisonia morrisonia, Bashania fangiana, Bashania fargesii, Chaetodon vagabundus, Colletes floralis, Coluber constrictor flaviventris, Coptotermes gestroi, Crotophaga major, Cyprinella lutrensis, Danaus plexippus, Fagus grandifolia, Falco tinnunculus, Fletcherimyia fletcheri, Hydrilla verticillata, Laterallus jamaicensis coturniculus, Leavenworthia alabamica, Marmosops incanus, Miichthys miiuy, Nasua nasua, Noturus exilis, Odontesthes bonariensis, Quadrula fragosa, Pinctada maxima, Pseudaletia separata, Pseudoperonospora cubensis, Podocarpus elatus, Portunus trituberculatus, Rhagoletis cerasi, Rhinella schneideri, Sarracenia alata, Skeletonema marinoi, Sminthurus viridis, Syngnathus abaster, Uroteuthis (Photololigo) chinensis, Verticillium dahliae, Wasmannia auropunctata, and Zygochlamys patagonica. These loci were cross-tested on the following species: Chaetodon baronessa, Falco columbarius, Falco eleonorae, Falco naumanni, Falco peregrinus, Falco subbuteo, Didelphis aurita, Gracilinanus microtarsus, Marmosops paulensis, Monodelphis Americana, Odontesthes hatcheri, Podocarpus grayi, Podocarpus lawrencei, Podocarpus smithii, Portunus pelagicus, Syngnathus acus, Syngnathus typhle,Uroteuthis (Photololigo) edulis, Uroteuthis (Photololigo) duvauceli and Verticillium albo-atrum. This article also documents the addition of nine sequencing primer pairs and sixteen allele specific primers or probes for Oncorhynchus mykiss and Oncorhynchus tshawytscha; these primers and assays were cross-tested in both species.
ISSN: 1755-098X

hal-01094222
https://hal-agroparistech.archives-ouvertes.fr/hal-01094222
DOI : 10.1111/j.1755-0998.2010.02916.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Active faults from the Campo de Dalías (SE Betic Cordillera) allow us to constrain the deformation styles involved in the development of segmented oblique-slip faults. This sector constitutes the widest outcrop of Plio-Quaternary sediments in the northern boundary of the Alboran Sea. It has emerged since the Late Pliocene, and therefore provides recent deformation markers that are not disturbed by erosive processes. The faults started to grow during the Pleistocene, reactivating previous hybrid joints, with a normal-dextral slip. We present a detailed map of the largest fault in the area, the Loma del Viento fault, comprising six onshore segments. Based on field work and aerial photography, the distributions of the contiguous joints have been mapped, and the joints reactivated as faults are identified. Some of these fault segments are hard-linked, and fault slip enhances toward the linkage sectors between them with associated sedimentary depocenters. An electrical tomography profile reveals the wedge geometry of a unit of Pleistocene conglomerates and red silts that were coevally deposited during the fault movement. Long-term slip rate in the central part of the fault is estimated at 0.07 ± 0.03 mm/y. In addition, a seismic crisis nucleated close to the Loma del Viento fault during November 2010 was recorded. Moment tensor analysis of the two mainshocks (Mw 3.5 and 4.2) provides a focal solution indicating a N120°E striking right-lateral strike-slip fault. The corrugated morphology of the Loma del Viento fault may have influenced its seismic behavior. Some of the fault segments are oblique to the general motion of the fault. These oblique segments would provide higher resistance against the general fault motion and could lock the fault, leading to accumulate elastic energy.
ISSN: 0040-1951

hal-00750357
https://hal.archives-ouvertes.fr/hal-00750357
DOI : 10.1016/j.tecto.2011.12.001