Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
We present here a synthesis of the evolution of rifted continental margin systems in the Gulf of Aden. These margins are volcanic to the west of the Gulf of Aden, where they are influenced by the Afar hotspot, and non-volcanic east of longitude 46° E. The combined use of magnetics, gravity, seismic reflection, field observations (tectonic, stratigraphic and sedimentological) and oil well data allowed us to obtain better constraints on the timing of continental rifting and seafloor spreading. From the Permo-Triassic to the Oligocene, the Arabian-African plate was subject to distributed extension, probably due, at least from the Cretaceous, to tensile stresses related to the subduction of the Tethysian slab in the north. In Late Eocene-Early Oligocene, 34-33 Ma ago, rifting started to localise along the future area of continental breakup. Initially guided by the inherited basins, continental rifting then occurred synchronously over the entire gulf before becoming localised on the northern and southern borders of the inherited grabens, in the direction of the Afar hotspot. In the areas with non-volcanic margins (in the east), the faults marking the end of rifting trend parallel to the inherited grabens. Only the transfer faults cross-cut the inherited grabens, and some of these faults later developed into transform faults. The most important of these transform faults follow a Precambrian trend. Volcanic margins were formed in the west of the Gulf, up to the Guban graben in the southeast and as far as the southern boundary of the Bahlaf graben in the northeast. Seaward dipping reflectors can be observed on many oil industry seismic profiles. The influence of the hotspot during rifting was concentrated on the western part of the gulf. Therefore, it seems that the western domain was uplifted and eroded at the onset of rifting, while the eastern domain was characterised by more continuous sedimentation. The phase of distributed deformation was followed by a phase of strain localisation during the final rifting stage, just before formation of the Ocean-Continent Transition (OCT), in the most distal graben (DIM graben). About 20 Ma ago, at the time of the continental break-up, the emplacement of the OCT started in the east with exhumation of the subcontinental mantle. Farther west, the system was heated up by the strong influence of the Afar hotspot, which led to breakup with much less extension. In the Gulf of Aden (s.str), up to the Shukra El Sheik fracture zone, oceanic spreading started 17.6 Ma ago. West of this fracture zone, oceanic accretion started 10 Ma ago, and 2 Ma ago in the Gulf of Tadjoura. Post-rift deformation of the eastern margins of the Gulf of Aden can be seen in the distal and proximal domains. Indeed, the substantial post-rift uplift of these margins could be associated with either the continental break-up, or activity of the Afar hotspot and related volcanic/magmatic activity. Uplift of the northern proximal margin was still active (e.g. stepped beach rocks exposed at 60 m of 2 Ma; 30 m of 35,200 years; 10 and 2 m) and active volcanoes can be inferred at depths of between 70 and 200 km beneath the margin (at 5-10 km distance from the coast). On the distal margin, heat flow measurements show a high value that is associated with post-rift volcanic activity and the development of a volcano (with flows and sills) shortly after the formation of the OCT. The Afar hotspot is therefore important for several reasons. It allows the localisation of deformation along the Red Sea/Aden system and the rapid opening of the Gulf after the continental break-up; its influence also seems to persist during the post-rift period.
ISSN: 1866-7411

hal-01053089
https://hal.archives-ouvertes.fr/hal-01053089
DOI : 10.1007/s12517-011-0475-4

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the geodynamic evolution of the Aegea-Anatolia region and discuss strain localisation there over geological times. From Late Eocene to Present, crustal deformation in the Aegean backarc has localised progressively during slab retreat. Extension started with the formation of the Rhodope Metamorphic Core Complex (Eocene) and migrated to the Cyclades and the northern Menderes massif (Oligocene and Miocene), accommodated by crustal-scale detachments and a first series of core complexes (MCCs). Extension then localised in Western Turkey, the Corinth Rift and the external Hellenic arc after Messinian times, while the North Anatolian Fault penetrated the Aegean Sea. Through time the direction and style of extension have not changed significantly except in terms of localisation. The contributions of progressive slab retreat and tearing, basal drag, extrusion tectonics and tectonic inheritance are discussed and we favour a model (1) where slab retreat is the main driving engine, (2) successive slab tearing episodes are the main causes of this stepwise strain localisation and (3) the inherited heterogeneity of the crust is a major factor for localising detachments. The continental crust has an inherited strong heterogeneity and crustal-scale contacts such as major thrust planes act as weak zones or as zones of contrast of resistance and viscosity that can localise later deformation. The dynamics of slabs at depth and the asthenospheric flow due to slab retreat also have influence strain localisation in the upper plate. Successive slab ruptures from the Middle Miocene to the Late Miocene have isolated a narrow stripe of lithosphere, still attached to the African lithosphere below Crete. The formation of the North Anatolian Fault is partly a consequence of this evolution. The extrusion of Anatolia and the Aegean extension are partly driven from below (asthenospheric flow) and from above (extrusion of a lid of rigid crust).
ISSN: 0040-1951

insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950/document
https://hal-insu.archives-ouvertes.fr/insu-00715950/file/Jolivet-Aegean_Tectonophysics-2012.pdf
DOI : 10.1016/j.tecto.2012.06.011

Éditeur(s) : HAL CCSD
Résumé : International audience
The geology of the North Pyrenean Zone in the central Pyrenees allows for the observation in the field of theentire section of the Pyrenean rift, from the mantle to the crust and the Mesozoic cover (pre, syn and post rift).The good knowledge we have of the pre-Alpine history of the Pyrenees allows us to properly constrain the Alpinegeological evolution of the pre-Triassic rocks which record both Variscan and Alpine orogenic cycles.The mantle outcrop as kilometric to centimetric fragments of peridotite dispersed within a carbonate metamorphicbreccia. The study of peridotite serpentinisation shows several events of low-temperature serpentinisation, incontact with seawater. In some locallities, we can observe a mixture of fragments of variously serpentinizedperidotites. This suggests a tectonic context where fragments of peridotites from different structural levels weresampled more or less synchronously.The granulitic basement is characterized by a Variscan syndeformational HT event (300-280 Ma). So farwe have not found any trace of a Cretaceous HT event (> 500C). On the other hand, the basement is affectedby a regional metasomatism that began during the Jurassic and became more spatially focused with time until itwas restricted to the Pyrenean rift during the Aptien, Albian and Cenomanian. The talc-chlorite metasomatism(120-95 Ma) shows an evolution from a static toward a syn-deformation hydrothermal event, under a more or lessnormal geothermal gradient. Extensional deformation is recorded by the reworking of several inherited low-angleVariscan tectonic contacts, but also by dispersed high-angle extensional shear zones formed under greenshistconditions.The metamorphic Mesozoic cover of the basement massifs, which constitute the so-called Internal MetamorphicZone, is an allochtonous unit made of lenses of Mesozoic rocks enclosed into the breccia, whichlocally contains peridotite and basement clasts. The Mesozoic metamorphic carbonates show a first phase ofsyn-metamorphic (450-600C, P < 2 kb) ductile deformation, and subsequent phases of folding and fracturing.The datation of neoformed minerals give a 108-85 Ma time span for the metamorphism. We interpret this brecciaas an abandonment breccia which marks the emergence of the main detachment. The basal contact of the Mesozoiccover has a complex 3D geometry traced by Triassic evaporites. It corresponds to a major pre- and synorogenicpolyphased tectonic contact.All these data show a geometrically complex hyper-extended rift where the crust was not stretched under ahigh geothermal gradient but thinned by the tectonic extraction of relatively thin lenses and perhaps cut by highangle low-grade shear zones. The 3D geometry, as well as the strain records and the breccia lithologies stronglysuggest a non-cylindricity for the exhumation process, probably within a transtentional system
Geophysical Research Abstracts
Vienne, Austria

insu-01510371
https://hal-insu.archives-ouvertes.fr/insu-01510371

Résumé : L’arc des Petites Antilles résulte de la lente subduction vers l'Ouest des plaques Nord et Sud-Américaines sous la plaque Caraïbes (2cm/an). A la latitude de l’archipel guadeloupéen et à ~150 km à l’Ouest du front de déformation, le bassin d'avant-arc de Marie-Galante forme un bassin perché, incliné vers la fosse et limité vers l’Est par un haut-fond, l’Eperon Karukéra. À cette latitude, le bassin de Marie-Galante domine le prisme d’accrétion de la Barbade et fait face à la ride de Tiburon qui balaye la zone du Nord au Sud depuis la fin du Miocène supérieur. Le remplissage sédimentaire du Bassin de Marie-Galante montre des déformations actives au moins depuis ~30 millions d’années. L’objectif du travail est de reconstituer l’évolution tectono-sédimentaire de ce bassin pour apporter de nouvelles contraintes sur la compréhension globale de la zone de subduction frontale des Petites Antilles. Ce travail s'appuie sur les données de bathymétrie multifaisceaux et de sismique réflexion multi-traces haute résolution acquises lors des campagnes du programme KaShallow. Cette base de données, complétée de profils sismiques plus basse résolution de campagnes antérieures, permet d’avoir une couverture pseudo 3D et à quatre échelles de résolution de l'ensemble du bassin. Un échantillonnage par ROV et carottage ciblé a fourni 40 prélèvements dans les principales unités sismiques. Les analyses pétrologiques et les datations biostratigraphiques autorisent des reconstitutions paléo-environnementales depuis le Paléogène supérieur jusqu’à Actuel. L’interprétation sismique multi-échelle montre un bassin sédimentaire atteignant ~4,5s temps double (~4500 à 5625 m) sur un substratum magmatique pré-structuré. Ce bassin est composé de 5 grands ensembles sédimentaires (E-1, E1, E2, E3 et E4) subdivisés en 13 unités limitées par 14 surfaces de discontinuités. L’organisation séquentielle des unités sismiques permet de mettre en évidence 10 séquences de dépôts de troisièmes ordres (S-1 à S9). Le calage biostratigraphique de l’ensemble des séquences permet de proposer une évolution tectono-sédimentaire du bassin de l’Éocène à l’Actuel. Ainsi, nous distinguons quatre systèmes de failles normales associées à trois phases d’extensions qui contrôlent l’évolution architecturale et sédimentaire du bassin. 1/ Un système N050±10°E hérité, actif dès le Paléogène supérieur, qui contrôle le basculement général du bassin vers le SSE. Il est responsable de la formation de l'escarpement de Désirade d’environ 4500 m de dénivelé. Cette première extension est interprétée comme résultant de la fragmentation de l'avant-arc en réponse à l'augmentation du rayon de courbure de la zone de subduction. 2/ Un système N130°-N150°E, structurant à l’échelle de l’Éperon Karukéra, qui contrôle la sédimentation dès le Miocène inférieur et marque une première phase d'extension transverse à l’arc. 3/ Un système N160°-N180°E qui segmente le Bassin de Marie-Galante en un sous-bassin à l'Ouest et l'Éperon Karukéra à l'Est. Cette seconde extension, globalement perpendiculaire à la marge, s'accompagne d’une subsidence et d'une inversion de la polarité du bassin en réponse à son basculement vers la fosse qui débute au cours du Miocène moyen et se poursuit actuellement à l'Est du bassin. Cette évolution à long terme de l'avant-arc, concomitante avec le recul de l'arc volcanique vers l’Ouest, est considérée comme résultant d’une érosion basale de la plaque supérieure. 4/ Un système N090±10°E plus tardif est localisé au centre du bassin et qui contrôle le développement de plates-formes carbonatées néritiques sur certaines têtes de blocs, comme par exemple à Marie-Galante. Cette dernière extension, parallèle à l’arc, se manifeste dans le bassin à partir du Pliocène inférieur. Elle se superpose au régime d'extension perpendiculaire à l'avant-arc et est interprétée comme l'accommodation du partitionnement de la déformation en réponse à l’obliquité croissante du front subduction vers le Nord.
The Lesser Antilles result of the slow westward subduction of the North and South American plate under the Caribbean plate (2 cm / year). At the latitude of the Guadeloupe archipelago and ~ 150 km to the west of the deformation front, the fore-arc basin of Marie-Galante forms a perched basin tilted to the pit and limited to the East by a shoal, the Spur Karukéra. At this latitude, Marie-Galante basin dominates the accretionary prism of Barbados and faces wrinkle Tiburon sweeping the area from North to South from the late Miocene. The sedimentary fill Basin Marie-Galante shows active deformation since at least ~ 30 million years. The aim of the work is to reconstruct the tectono-sedimentary evolution of the basin to provide new constraints on the overall understanding of the frontal subduction zone Lesser Antilles. This work relies on multibeam bathymetry data and high-resolution seismic reflection multi-traces acquired during campaigns KaShallow program. This database, supplemented by lower resolution of previous campaigns seismic profiles, provides a pseudo-3D coverage and four scales of resolution of the entire basin. ROV sampling and targeted core provided 40 samples in the main seismic units. Petrological analysis and biostratigraphic dating allow paleoenvironmental reconstructions from the upper Paleogene up Actuel. Seismic interpretation multiscale shows a sedimentary basin reaching ~ 4,5s double (~ 4500-5625 m) on a substrate pre-structured magma. This basin consists of 5 main sedimentary units (E-1, E1, E2, E3 and E4) divided into 13 units bounded by discontinuities 14 surfaces. The sequential organization of seismic units allows to highlight sequences 10 deposits of third order (S-1 to S9). The biostratigraphic calibration of all sequences able to offer a tectono-sedimentary evolution of the Eocene basin to Present. Thus, we distinguish four normal fault systems associated with three phases of extensions that control the architectural and sedimentary evolution of the basin. 1 / A system N050 ± 10 ° E inherited assets from the upper Paleogene, which controls the overall pelvic tilt towards the SSE. He is responsible for the formation of the escarpment Désirade about 4500 m elevation. The first extension is interpreted as resulting from the fragmentation of the fore-arc in response to the increase in the radius of curvature of subduction. 2 / A system N130 ° -N150 ° E, structuring across the Spur Karukéra, which controls sediment from the Miocene and marks the first phase of transverse extension arc. 3 / A system N160 ° E ° -N180 which segments Basin Marie-Galante in a sub-basin to the west and the Spur Karukéra in the East. This second extension, generally perpendicular to the margin, is accompanied by subsidence and reversing the polarity of the basin in response to his switch to the pit, beginning during the Middle Miocene and is ongoing in the East the basin. This long-term evolution of the forearc, concurrent with the decline in volcanic arc to the west, is considered as resulting from a basal erosion of the top plate. 4 / A system N090 ± 10 ° later E is located in the center of the basin and controlling the development of neritic carbonate platforms on certain blocks heads, such as Marie-Galante. This latest extension, parallel to the arc occurs in the basin from the lower Pliocene. It is superimposed on the expansion plan perpendicular to the fore-arc and is interpreted as the accommodation of the partitioning of deformation in response to the increasing obliquity front subduction north.

http://www.theses.fr/2014AGUY0799/document

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Reactivation of structures inherited from previous collisional or rifting events, especially lithospheric-scale faults, is a major feature of plate tectonics. Its expression ranges from continental break-up along ancient collisional belts(1,2) to linear arrays of intraplate magmatism and seismicity(3,4). Here we use multiscale numerical models to show that this reactivation can result from an anisotropic mechanical behaviour of the lithospheric mantle due to an inherited preferred orientation of olivine crystals. We explicitly consider an evolving anisotropic viscosity controlled by the orientation of olivine crystals in the mantle. We find that strain is localized in domains where shear stresses on the inherited mantle fabric are high, and that this leads to shearing parallel to the inherited fabric. During rifting, structural reactivation induced by anisotropy results in oblique extension, followed by either normal extension or failure. Our results suggest that anisotropic viscosity in the lithospheric mantle controls the location and orientation of intraplate deformation zones that may evolve into new plate boundaries, and causes long-lived lithospheric-scale wrench faults, contributing to the toroidal component of plate motions on Earth.
ISSN: 1752-0894

hal-00413033
https://hal.archives-ouvertes.fr/hal-00413033
DOI : 10.1038/ngeo528

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The present-day topography of the Tian Shan range is considered to result from crustal shortening related to the ongoing India-Asia collision that started in the early Tertiary. In this study we report evidence for several episodes of localized tectonic activity which occurred prior to that major orogenic event. Apatite fission track analysis and (U-Th)/He dating on apatite and zircon indicate that inherited Paleozoic structures were reactivated in the late Paleozoic-early Mesozoic during a Cimmerian orogenic episode and also in the Late Cretaceous-Paleogene (around 65-60 Ma). These reactivations could have resulted from the accretion of the Kohistan-Dras arc or lithospheric extension in the Siberia-Mongolia zone. Activity resumed in the late Mesozoic prior to the major Tertiary orogenic phase. Finally, the ongoing deformation, which again reactivates inherited tectonic structures, tends to propagate inside the endoreic basins that were preserved in the range, leading to their progressive closure. This study demonstrates the importance of inherited structures in localizing the first increments of the deformation before it propagates into yet undeformed areas.
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
hal-00551323
https://hal.archives-ouvertes.fr/hal-00551323
https://hal.archives-ouvertes.fr/hal-00551323/document
https://hal.archives-ouvertes.fr/hal-00551323/file/2010TC002712.pdf
DOI : 10.1029/2010TC002712

Éditeur(s) : HAL CCSD
Résumé : International audience
In the external Western Alps, the collision started with the shortening of the proximal European (Dauphinois) margin. One peculiar feature is the crustal thickening that finally led to the exhumation of the basement External Crystalline Massifs (ECM) during the Neogene. In these massifs, various age of shortening, structural style and sequence of deformation have been proposed leading to different kinematics along the Alpine arc that in turn do not imply the same crustal/lithospheric strength. In this contribution, we present new structural and microstructural data along with Ar/Ar ages from field studies in the Oisans-Grandes Rousses massifs, between Grenoble and Briançon). From balanced cross-sections, we show that about half of the external zone crustal shortening is accommodated within the ECM with similar Ar/Ar ages in all massifs. Furthermore, the shear zones present very large thicknesses (several hundred meters) and do not reactivated either the inherited Liassic normal faults or the Variscan foliation. Finally, the main shortening structures are localized beneath inherited Liassic syn-rift basins. These results suggest that the crust was weak during its shortening. Such behavior is most likely due to the combination of several factors: the crust burial (below the overthrusting internal units) down to about 10km, the presence of weak inherited syn-rift basins, and the strain softening in shear zones that evolve in mica-rich phyllonites. These results are consistent with the studies in the Aar massif and should most likely apply to the Mont Blanc massif, whose relationships with its cover are still debated.
EGU General Assembly
Vienne, Austria

insu-00839426
https://hal-insu.archives-ouvertes.fr/insu-00839426
BIBCODE : 2013EGUGA..15.8837B

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite bodies are exhumed extensions at depth of shallow structural level brittle faults. They are characterised by intense strain localisation involving large volumes of middle to lower continental crust. The analysis of shear zone geometry and microstructures is a useful tool to decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of the deformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However, only rare examples provide geochronological data that can be unambiguously interpreted and cooling, recrystallisation and neocrystallisation are difficult to tell from each other. Thus, time-scales over which major mylonite zones develop and remain active under ductile conditions as well as their strain rate often remain poorly documented. We investigated two sections across the South-Armorican Shear Zone (SASZ), a crustal-scale pluri-km thick dextral shear zone active during a single tectonic event of late-Variscan age and associated with syntectonic granite emplacement.. Finite strain profiles on these cross-sections, quantified from average Quartz grain-size in 34 samples, show a strong deformation partitioning towards the center of the SASZ, with a decrease, for each section, from 150µm in slightly deformed zones to less than 7-5 µm in the core of the ultramylonite. Furthermore, toward the core of the SASZ, development of a penetrative shear band network progressively eliminates lenses of less deformed rocks and results in homogenisation of the Quartz grain sizes. In parallel, we performed in-situ UV-laser Ar/Ar dating on the fabric-forming white micas. White micas population can be decomposed into inherited muscovites carried by the folation and newly-formed, syn-tectonic substituted phengites located along the shear bands yielding 2 age groups for each sample. Along the profiles, the difference between these two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, mylonite-forming phengites yielded the same age irrespectively of their position on the section or of the rock strain.. On the regional point of view, this study brings deformation-ages for the late-orogenic evolution of the South Armorican domain. Strain accumulated along the SASZ in a time-span extending to 300-298 Ma, i.e. contemporaneously with the activity of nearby major extensional shear zones. These results support a new model of crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history (defined as the largest age difference through the section), i.e. the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves with time, with an increasingly large fraction partitioned in the ultramylonitic core.
EGU General Assembly
Vienne, Austria

insu-00839320
https://hal-insu.archives-ouvertes.fr/insu-00839320
BIBCODE : 2010EGUGA..12.9881A

Éditeur(s) : HAL CCSD
Résumé : To understand the effect of inherited lithospheric structures on the continental plates deformation process, we have developed a multi scale model that explicitly takes into account an anisotropic viscosity due to the Crystal Preferred Orientation (CPO) of olivine in the mantle by coupling a viscoplastic self-consistent simulation of the deformation at the polycrystalline aggregate to a 3D Finite Element code. Using this tool, we calculate the mechanical behavior of a continental lithosphere submitted to extension for various initial structures. The first set of experiments investigates the deformation of a plate with a homogeneous initial olivine CPO. Results show that the macroscopic anisotropy is strongly dependent on the initial orientation of the olivine CPO relative to the solicitation and to its evolution. The second set of experiments aims to analyze the deformation of a continental plate containing pre-existing lithospheric scale shear zones. These multi-domain models show that the olivine mechanical anisotropy may induce the reactivation of pre-existing lithospheric scale shear zones in a plate submitted to rifting. In both cases, the results shows that the macroscopic mechanic anisotropy induced by the evolution of olivine CPO in the upper mantle is a key parameter to understand the deformation of the continental plates and to explain the observed reactivation of inherited structure from past tectonics events
Afin de comprendre l'effet des structures préexistantes sur la déformation des plaques continentales, nous avons développé une méthode de modélisation mécanique multi-échelle utilisant une viscosité anisotrope induite par les Orientations Préférentielles du Réseau (OPR) des cristaux d'olivine présents dans le manteau. Cette méthode en couple le calcul viscoplastique autocohérent de la déformation d'un agrégat d'olivine à un code éléments finis 3D. Elle a été utilisée pour le calcul du comportement mécanique d'une plaque continentale soumise à une extension. Une première série d'expériences numériques sur l'extension de plaque lithosphérique présentant des OPR initiales d'olivine homogènes a permis de montrer que l'anisotropie mécanique macroscopique est fortement dépendante de l'orientation initiale de l'OPR. La seconde série de simulations analyse l'extension d'une plaque continentale présentant une zone présentant des OPR d'olivine héritées d'un événement tectonique précédant. Les résultats de ces calculs multi-domaines que l'anisotropie mécanique de l'olivine peut expliquer la réactivation des zones de cisaillement héritées lors du rifting. Les résultats obtenus dans les deux séries de modèles montrent que l'anisotropie mécanique macroscopique induite par l'évolution des OPR d'olivine dans le manteau supérieur est un paramètre clé pour la compréhension de la déformation des plaques continentales et pour expliquer la réactivation observée de structures tectoniques, tels que les grands décrochements, lors des épisodes tectoniques ultérieurs.
https://tel.archives-ouvertes.fr/tel-00369463

tel-00369463
https://tel.archives-ouvertes.fr/tel-00369463
https://tel.archives-ouvertes.fr/tel-00369463/document
https://tel.archives-ouvertes.fr/tel-00369463/file/KnollThese09.pdf

Éditeur(s) : Amer Geophysical Union
Résumé : The origin of the Algerian margin remains one of the key questions still discussed in the Western Mediterranean sea, due to the imprecise nature and kinematics of the associated basin during the Neogene. For the first time, the deep structure of the Maghrebian margin was explored during the SPIRAL seismic survey. In this work, we present a N-S transect off Tipaza (west of Algiers), a place where the margin broadens due to a topographic high (Khayr-al-Din Bank). New deep penetration seismic profiles allow us to image the sedimentary sequence in the Algerian basin and the crustal structure at the continent-ocean boundary. Modeling of the wide-angle data shows thinning of the basement, from more than 15km in the continental upper margin to only 5–6km of oceanic-type basement in the Algerian basin, and reveals a very narrow or absent transitional zone. Analysis of the deep structure of the margin indicates features inherited from its complex evolution: (1) an oceanic-type crust in the deep basin, (2) similarities with margins formed in a transform-type setting, (3) a progressive deepening of the whole sedimentary cover, and the thickening of the Plio-Quaternary sediments at the margin foot, coeval with (4) a downward flexure of the basement in the basin. These features argue for a multiphased evolution of the margin, including (1) an early stage of rifting and/or spreading, (2) a late transcurrent episode related to the westward migration of the Alboran domain, and (3) a diffuse Plio-Quaternary compressional reactivation of the margin.
Journal Of Geophysical Research-solid Earth (0148-0027) (Amer Geophysical Union), 2013-08 , Vol. 118 , N. 8 , P. 3899-3916

Droits : 2013. American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00152/26333/24412.pdf
DOI:10.1002/jgrb.50318
http://archimer.ifremer.fr/doc/00152/26333/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : The Latest Cretaceous/Paleocene paleokarsts from Bas-Languedoc (South of France) are characterized by : 1) exokarstic paleosurfaces (sink holes, pinnacles, canyons) which are mostly superimposed onto the Late Jurassic limestones and partly filled up with breccias and sandy clays containing Paleocene planktonic foraminifera; 2) endokarstic cavities filled up by sandy pelites and laminated mudstones with similar micropaleontological assemblage. All these cavities constitute three cut-and-filled paleokarstic systems. A general model of formation for this polyphase system is proposed. These paleosurfaces are generated by a Latest Cretaceous tectonic phase and Paleocene movements associated with eustatic rises inducing rapid floodings. During Upper Danian-Lower Selandian times three successive base levels drops, whose cumulated duration could be as long as 3 Ma, have induced several hundred metres of incisions within the exposed Jurassic carbonate series. A paleogeographic reconstruction shows three main marine gulfs which extend towards NE the EW Pyrenean thrust belt ("Pyrenean Paleocene Trough", PPT) located on the axis of the future Pyrenees. The similarity of the facies and micropaleontological content in the two domains suggests connexions between the marine Paleocene deposits of Bas-Languedoc and the PPT. It could thus explain the succession of the same tectono-eustatic events. We propose, as an hypothesis, that the rapid sea-level changes, as recorded by the imbricated karstic paleomorphologies, could be induced by the closing and the opening of a strait in the Eastern part of the PPT acting as a sill. This would be controlled by tectonic movements along the active orogenic axis of the Pyrenean Range and eustatic variations of the Paleocene World Ocean. The karstic systems developed during these low-stand episodes may have been later reactivated after the Early Selandian and more specifically during the Messinian desiccation event. This late evolution may have generated deep flooded karsts, now situated below the present sea level. Such karsts, partly inherited from Paleocene, could be important aquifers of economic interest.
ISSN: 0985-3111

hal-00407601
https://hal.archives-ouvertes.fr/hal-00407601
DOI : 10.3166/ga.20.301-326

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic wedges locally present chaotic tectonostratigraphic units that contain exotic blocks of various size, origin, age and lithology, embedded in a sedimentary matrix. The occurrence of ophiolitic blocks, sometimes huge, in such “mélanges” raises questions on (i) the mechanisms responsible for the incorporation of oceanic basement rocks into an accretionary wedge and (ii) the mechanisms allowing exhumation and redeposition of these exotic elements in “mélanges” during wedge growth.To address these questions, we present the results of a series of analogue experiments performed to characterize the processes and parameters responsible for accretion, exhumation and tectonosedimentary reworking of oceanic basement lithospheric fragments in an accretionary wedge.The experimental setup is designed to simulate the interaction between tectonics, erosion and sedimentation. Different configurations are applied to study the impact of various parameters, such as irregular oceanic floor due to structural inheritance, or the presence of layers with contrasted rheology that can affect deformation partitioning in the wedge (frontal accretion vs basal accretion) influencing its growth. Image correlation technique allows extracting instantaneous velocity field, and tracking of passive particles. By retrieving the particle paths determined from models, the pressure-temperature path of mélange units or elementary blocks can be discussed. The experimental results are then compared with observations from ophiolite-bearing mélanges in Taiwan (Lichi and Kenting mélanges) and Raman spectroscopy of carbonaceous material (RSCM) Thermometry data on rocks from the northern Apennines (Casanova mélange). A geological scenario is proposed following basic observations. The tectonic evolution of the retroside of doubly vergent accretionary wedges is mainly controlled by backthrusting and backfolding. The retro wedge is characterized by steep slopes that are prone to gravitational instabilities. It triggers submarine landslides inducing huge mass transfers. This erosion combined with backthrusting could favour exhumation of the ophiolitic fragments formerly accreted at the base of the wedge along the rough seafloor-sediments interface. Such an exhumed material can be reworked and deposited as debris- flows in proximal basins located at the foot of the retrowedge slope forming a tectono-sedimentary mélange. These syntectonic basins are continuously deformed and involved in prograding backthrusting-induced deformation.
ISSN: 0264-3707

hal-01395127
https://hal.archives-ouvertes.fr/hal-01395127
DOI : 10.1016/j.jog.2016.05.008

Éditeur(s) : HAL CCSD
Résumé : 1 p.
International audience
The 12th May 2008 Wenchuan earthquake in the Longmen Shan occurred on a large thrust fault largely inherited from an Indosinian structure itself probably controlled by an older structural heritage of the South China block continental margin. Within the whole northeast Tibet region, such a structural inheritance has had a major impact on the Tertiary deformation. It appears of primary importance to assess the pre-Tertiary tectonic evolution of the main blocks involved to understand the actual deformation in the eastern edge of Tibet. Over the past decades, the Proterozoic to Cenozoic tectonic, metamorphic and geochronologic history of the Longmen Shan and Songpan Garzê area have been largely studied. We present a synthesis of the tectonic evolution of the Songpan Garzê fold and thrust belt from Triassic to present. The Songpan-Garzê belt was formed during closure of a wide oceanic basin ?lled with a thick (5 to 15 km) sequence of Triassic ?yschoid sediments. Closure of the basin due to Triassic subduction involved strong shortening, intense folding and faulting of the Triassic series. A large-scale décollement, that presently outcrops along the eastern boundary of the belt (Danba area), allowed the growth of a wide and thick accretionary wedge. It develops in the Paleozoic and Triassic series and separates the accretionary prism from an autochthonous crystalline basement which shares many similarities with the basement of the Yangtze Craton (0.7-0.9 Ga). To the north and northwest, below the thickened Triassic series of the belt, the composition (oceanic or continental) of the basement remains unknown. During the Indosinian orogeny the emplacement of orogenic granites (220 - 150 Ma) was associated to crustal thickening. The isotopic composition of granitoids shows that their magma source were predominantly derived from melting of the proterozoic basement with varying degrees of sedimentary material and negligible mantle source contribution. In the Danba area, the décollement outcrops in a large tertiary antiform with a NNW-SSE axis. It has been exhumed too in the hanging wall of the NE-SW faults of the Tertiary Longmen-Shan belt that marks the present day transition from the Tibetan plateau to the Sichuan basin. These faults have episodically absorbed signi?cant shortening since the Late Triassic. The amount and precise timing of post-triassic deformation are dif?cult to constrain especially because of the dif?culty to isolate the tertiary thermochronological signal from the protracted late Triassic - Cretaceous thermal history. Nonetheless it is generally accepted that Jurassic - Cretaceous tectonism did not modi?ed the general Triassic architecture of eastern Tibet contrarily to the Tertiary deformation. The long-term cooling histories obtained on Mesozoic granites and on the metamorphic series of the Danba dome are very similar showing a very slow and regular cooling during Jurassic andCretaceous, con?rming the absence of major tectonic event between c.a. 150 and 30 Ma. Low temperature thermochronology data indicate that ?nal exhumation and cooling occurred in theTertiary with an acceleration between 10 and 5 Ma along the major tectonic structures. Within the Longmen Shan range, a total denudation of 7 to 10 km is estimated for the late Cenozoic period. Similar amounts of late Tertiary denudation have been estimated along an east-west section across the Xianshuihe fault
Asian climate and tectonics seminar
Utrecht, Netherlands

insu-00610298
https://hal-insu.archives-ouvertes.fr/insu-00610298
DOI : 10.1016/j.jseaes.2010.03.008

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We use lithospheric-scale analog models to study the reactivation of pre-existing heterogeneities under oblique shortening and its relation to the origin of arcuate orogens. Reactivation of inherited rheological heterogeneities is an important mechanism for localization of deformation in compressional settings and consequent initiation of contractional structures during orogenesis. However, the presence of an inherited heterogeneity in the lithosphere is in itself not sufficient for its reactivation once the continental lithosphere is shortened. The heterogeneity orientation is important in determining if reactivation occurs and to which extent. This study aims at giving insights on this process by means of analog experiments in which a linear lithospheric heterogeneity trends with various angles to the shortening direction. In particular, the key parameter investigated is the orientation (angle α) of a strong domain (SD) with respect to the shortening direction. Experimental results show that angles α ≥ 75° (high obliquity) allow for reactivation along the entire SD and the development of a linear orogen. For α ≤ 60° (low obliquity) the models are characterized by the development of an arcuate orogen, with the SD remaining partially non-reactivated. These results provide a new mechanism for the origin of some arcuate orogens, in which orocline formation was not driven by indentation or subduction processes, but by oblique shortening of inherited heterogeneities, as exemplified by the Ouachita orogen of the southern U.S.
ISSN: 0278-7407

insu-01498544
https://hal-insu.archives-ouvertes.fr/insu-01498544
https://hal-insu.archives-ouvertes.fr/insu-01498544/document
https://hal-insu.archives-ouvertes.fr/insu-01498544/file/Calignano_et_al-2017-Tectonics.pdf
DOI : 10.1002/2016TC004424

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Lateral variations along the Himalayan arc are suggested by an increasing number of studies and carry important information about the orogen’s segmentation. Here we compile the hitherto most complete land gravity dataset in the region which enables the currently highest resolution plausible analysis. To study lateral variations in collisional structure we compute arc-parallel gravity anomalies (APaGA) by subtracting the average arc-perpendicular profile from our dataset; we compute likewise for topography (APaTA). We find no direct correlation between APaGA, APaTA and background seismicity, as suggested in oceanic subduction context. In the Himalayas APaTA mainly reflect relief and erosional effects, whereas APaGA reflect the deep structure of the orogen with clear lateral boundaries. Four segments are outlined and have disparate flexural geometry: NE India, Bhutan, Nepal & India until Dehradun, and NW India. The segment boundaries in the India plate are related to inherited structures, and the boundaries of the Shillong block are highlighted by seismic activity. We find that large earthquakes of the past millennium do not propagate across the segment boundaries defined by APaGA, therefore these seem to set limits for potential rupture of megathrust earthquakes.
ISSN: 2045-2322

hal-01420404
https://hal.archives-ouvertes.fr/hal-01420404
https://hal.archives-ouvertes.fr/hal-01420404/document
https://hal.archives-ouvertes.fr/hal-01420404/file/hetenyi2016.pdf
DOI : 10.1038/srep33866

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The South East Sayan area,Wof the Lake Baikal is subjected to a very complex tectonic setting where the extensional stress field of the Baikal Rift System meets the compressional stress field generated by the India­Asia collision further south. Using satellite images, aerial photographs, SRTM DEM, field mapping of geomorphological structures, and published neotectonics and geological data we show that most of the relief in the SE Sayan initiated during Late Pliocene­Pleistocene through compressive reactivation of inherited structures. By Late Quaternary, clockwise rotation of the compressive field generated strike­slip faulting and local, secondary extension still within a general compressional stress field. We demonstrate that the formation of the small-scale extensional basins within the East Sayan range is not linked to general the extension in the Baikal Rift System nor to a possible asthenospheric plume acting at the base of the crust but rather to the rotation of small rigid tectonic blocks driven by the compression.
ISSN: 0743-9547

insu-00605062
https://hal-insu.archives-ouvertes.fr/insu-00605062
DOI : 10.1016/j.jseaes.2010.10.011

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
We provide new constraints on the modes of mantle exhumation and denudation in the pre-orogenic Pyrenees by investigating the poorly known peridotites located east of the Lherz body, in eastern Ariè ge (Vicdessos, Urs, Bestiac, Caussou and Prades main peridotitic bodies). We show that: (1) numerous peridotite bodies, not described so far, are constituted by decametric to sub-metric outcrops scattered between and around the main outcrops identified by Monchoux (1970); (2) most of the peridotites form blocks and lenses of various sizes, from millimetric monocrystalline grains to hectometric olistoliths, embedded in debris flows involving mainly Mesozoic metasediments; these peridotites can therefore be linked to the S-type peridotites of Lagabrielle et al. (2010), and share similarities with the peridotites of Lherz region (Clerc et al., 2012). All originated from tectono-sedimentary processes associated with mantle exhumation in relation with extreme thinning and breakoff of the continental basement; (3) the various petrographic characters of these peridotites and their heterogeneity in serpentinisation degree imply a peculiar mode of exhumation, which merges mantle fragments inherited from different structural levels; (4) the lack of tectonic structures such as faults and shear planes associated with the ultramafic-rich breccia formation and the presence of neoformation of metamorphic minerals within the matrix preclude their origin as cataclasites related to the Latest Cretaceous and Tertiary Pyrenean contractional deformation. The peridotites of eastern Ariè ge are indisputable witnesses of the presence of an inverted hyper-extended Cretaceous passive margin forming the current North Pyrenean zone. The geometry of the extensional system was complex and probably associated with strike-slip faults and transcurrent motion. ß 2016 The Authors. Published by Elsevier Masson SAS on behalf of Acadé mie des sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons. org/licenses/by-nc-nd/4.0/).
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01280502
https://hal-insu.archives-ouvertes.fr/insu-01280502
https://hal-insu.archives-ouvertes.fr/insu-01280502/document
https://hal-insu.archives-ouvertes.fr/insu-01280502/file/1-s2.0-S1631071316000043-main.pdf
DOI : 10.1016/j.crte.2015.12.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Schistes Lustres of Alpine Corsica (France) serpentinized mantle rocks are associated with continental basement and meta-volcanic/-seclimentary cover rocks. The relationships among these different lithologies are especially well exposed in the Monte San Petrone unit, where Alpine metamorphism reached lawsonite-eclogite conditions. The contact between serpentinites and slivers of continental basement, relatively flat-lying over several kilometers, is characterized by evidence of cataclastic deformation pre-dating Alpine High-Pressure ductile fabrics. The serpentinite/continental basement pair is stratigraphically overlain by metasediments with a typical Jurassic-Cretaceous supra-ophiolitic lithostratigraphy, with metaradiolarites passing upward to marbles and cal cschists. Noticeably, no evidence of cataclastic deformation is found in metasediments. These observations indicate that the lithostratigraphy of the Monte San Petrone unit was established during a pre-Alpine polyphase evolution, which culminated in extensive brittle deformation along a flat-lying detachment fault prior to the deposition of Jurassic sediments. We suggest that the inferred Mesozoic extensional tectonics were related to the opening of the Westem Tethys. The Mesozoic architecture of the Monte San Petrone area, which is typical of an Ocean-Continent Transition (OCT) zone, was preserved despite Alpine deformation and metamorphism, when the different lithologies (i.e. meta-ophiolites, continent-derived rocks and metasediments) underwent a common metamorphic evolution, culminating at T=490-550 degrees C and P= 2.2-2.6 GPa. Similar tectonostratigraphic associations are observed in other high-pressure terranes of Alpine Corsica, suggesting that inherited OCT-type domains may be common in Alpine-type orogens.
ISSN: 0024-4937

hal-00617744
https://hal.archives-ouvertes.fr/hal-00617744
DOI : 10.1016/j.lithos.2011.02.013