Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Several studies, both theoretical and experimental, show that sedimentary rocks have a fractal pore-grain interface. In this paper a computer simulated 3-D sedimentary rock structure generated by the Relaxed Ballistic Bidisperse Deposition Model (RBBDM), is investigated to characterize the micro structure of its pores. The pore volume and the rock-pore interface show the same fractal dimension indicating that the pore volume is a fractal. The two point density correlation is computed for the pore space and the results compare favourably with the range reported from experiments. An array of 2-D X-ray tomography micrograph sections of a real sedimentary rock, an oolitic limestone (pure calcite) from the Mondeville formation of Middle Jurassic age (Paris Basin, France), was used to generate a 3-D bitmap. The 3-D real rock sample generated in this manner, was analysed for similar studies as the simulated structure. The results were compared with those obtained from simulation. The simulation results agree qualitatively with the real rock sample. Diffusion through the connected pore space of the simulated structure was studied using a random walk algorithm and the results compared with the similar simulation study done on the 3-D oolitic limestone specimen. In both cases diffusion was found to be anomalous indicating that the sedimentary rock has a fractal geometry. The favourable comparability of results between the simulated and real rock supports the usefulness of the model of sedimentary rock generation which can be applicable to transport phenomena.
ISSN: 0956-540X

hal-00823061
https://hal.archives-ouvertes.fr/hal-00823061
DOI : 10.1093/gji/ggs084

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
It is well known that sedimentary rocks having same porosity can have very different pore size distribution. The pore distribution determines many characteristics of the rock, among which its transport properties are often the most useful. Multifractal analysis is a powerful tool that is increasingly used to characterize the pore space. In this study, we performed multifractal analysis of pore distribution on simulated sedimentary rocks using the relaxed bidisperse ballistic deposition model (RBBDM). The RBBDM can generate a 3-D structure of sedimentary rocks of variable porosity by tuning the fraction p of particles of two different sizes. We also performed multifractal analysis on two samples of real sedimentary rock to compare with the simulation studies. One sample, an oolitic limestone is of high porosity (40 per cent) while the other is a reefal carbonate of low porosity, around 7 per cent. 2-D sections of X-ray microtomographs of the real rocks were stacked sequentially to reconstruct the real rock specimens. Both samples show multifractal character. The results from analysis of real rock agree quite well with the simulated structure of low porosity. The simulated rock of high porosity showed a weak multifractal nature though the real rock sample of similar porosity was found to be strongly multifractal. We propose a ‘structure parameter’ ξ which is a function of porosity and the generalized dimensions, and controls the transport properties of the rock.
ISSN: 0956-540X

hal-01174142
https://hal.archives-ouvertes.fr/hal-01174142
DOI : 10.1093/gji/ggu417

Éditeur(s) : Elsevier
Résumé : A coupled three-dimensional physical-biogeochemical model was developed in order to simulate the ecological functioning of the Rio de la Plata estuary and plume. The biogeochemical model reproduces the nitrogen cycle between five compartments: dissolved inorganic nitrogen, phytoplankton, zooplankton, detritus and dissolved organic nitrogen. The coupling is tested in seasonal climatological configurations and for the particular year 1999. The circulation is forced with Parana and Uruguay rivers discharges, NCEP wind and tide. The biogeochemical model includes loads of inorganic and organic nitrogen from both rivers. The model reproduces the correct tidal amplitudes in the estuary, as well as the most outstanding features of the observed horizontal and vertical structures of the salinity plume. Simulated surface chlorophyll a concentrations exhibit maximum values all year long seaward of the turbidity front, between the 0.5 and 15 isohalines, in agreement with SeaWiFS images of the area. The model simulates well the low primary production in the light-limited highly turbid tidal river (20 gC/m(2)/yr), the high production area in the frontal zone where it can reach 500 gC/m(2)/yr, and the nutrient-limited production in the outer estuary and inner shelf (300 gC/m(2)/yr), with realistic values in each case. According to the 1999 model simulation, the tidal river is the location of organic nitrogen remineralization with a consequent increase of the inorganic pool. At the entrance of the frontal zone, inorganic nitrogen represents about 75% of the whole nitrogen pool, it is reduced to 50% at its sea end-member. The outer estuary has the same sink role for inorganic nitrogen, suggesting that organic nitrogen is the major form exported to the shelf.
Continental Shelf Research (0278-4343) (Elsevier), 2005-03 , Vol. 25 , N. 5-6 , P. 629-653

Droits : 2004 Elsevier Ltd.
http://archimer.ifremer.fr/doc/2005/publication-334.pdf
DOI:10.1016/j.csr.2004.10.003
http://archimer.ifremer.fr/doc/00000/334/

Résumé : Ce travail est l'expression d'une volonté de chercheurs, de la Carabe d'améliorer les connaissances scientifiques méso- et micro-météorologiques appliquées aux milieux insulaires sous influence des alizés et de développer la recherche dans ces domaines.On sait que le phénomène météorologique le plus remarquable impactant les îles de la Caraïbe reste le cyclone tropical. Mais d'autres phénomènes, a des échelles inferieures, telles que les pluies intenses, les houles, la dégradation de la qualité de l'air ont une importance aigüe en termes de risques naturels ou de risques sur la sante. Ces exemples attestent la nécessité d'utiliser des méthodes de descente d'échelle pour exploiter l'information météorologique et/ou climatique de grande échelle et dériver des scenarios locaux et régionaux appliques aux territoires insulaires. Ce défi est important car l'attente d'analyses scientifiques pertinentes dans ces domaines est grande.Les travaux présentés dans ce mémoire ont pour principaux objectifs la simulation numérique puis l'analyse des mécanismes méso- et micro-échelles qui induisent des circulations locales diurnes et nocturnes sur l'archipel de la Guadeloupe à l'aide de codes numériques météorologiques éprouves car largement utilises en recherche et en prévision opérationnelle.Ils constituent donc la première étude de modélisation numérique à haute résolution en basse atmosphère, par descente d'échelle dynamique, pour des intervalles d'espace compris entre 1 km et 111 m sur cet archipel.Le modelé atmosphérique Weather Research and Forecasting ARW V3.4 (WRF ARW), non-hydrostatique, a été utilise pour l'ensemble des simulations pour modéliser la troposphère depuis l'échelle globale à l'échelle de la turbulence.Trois situations météorologiques classiques réelles d'une durée de 48 heures, correspondant à 80 % des situations météorologiques observées dans la zone, alizes soutenus (AS), alizes moyens (AM), alizes faibles (AF) ont été examinées. Ces situations sont caractérisées par les valeurs du nombre de Froude local suivantes : 0,82 (AS), 0,41 (AM) et 0,21 (AF). Six domaines de modélisation ont été sélectionnés pour effectuer les descentes d'échelle dynamiques : D01 (maille de 27 km), D02 (maille de 9 km), D03 (maille de 3 km), D04 (maille de 1 km), D05 (maille de 333 m) et D06 (maille de 111 m) avec soixante-dix niveaux verticaux. Les quatre premiers domaines (D01 à D04) couvrent l'archipel de la Guadeloupe et sont utilisés en mode méso-échelle à l'aide d'un schéma d'ensemble de couche limite planétaire YSU. Les domaines D05 (couvrant l'île de la Basse-Terre et le centre de l'archipel) et D06 (couvrant la zone littorale et rurale du Petit Cul-de-Sac Marin et la zone urbaine de l'agglomération pointoise) sont utilisés en mode Large Eddy Simulation avec une fermeture de la turbulence 1,5 TKE 3D. Le modèle WRF a été forcé toutes les six heures par l'assimilation des champs d'analyses globales du modèle NCEP FNL (1° de résolution). Les simulations effectuées ont permis d'obtenir des champs de variables météorologiques 10-minutes à très hautes résolutions spatiales.Les résultats des simulations méso- et micro-échelles ont été confrontés aux valeurs expérimentales obtenues à l'aide de capteurs places sur des mâts météorologiques (campagne Atmo-Mangrov et réseau de mesure Météo-France). Il s'agissait d'optimiser l'utilisation des couplages de codes numériques tout en conservant la possibilité de les confronter aux observations expérimentales.Les résultats des simulations numériques micro-échelles, des différents cas (AS, AM, AF) sont utilisées pour forcer (c'est-à-dire définir les conditions limites) un modèle lagrangien de dispersion de particules : FLEXPART. Le système couple FLEXPART-WRF a été employé dans le domaine D06 pour étudier la dispersion du panache d'oxydes d'azote émis par la principale usine de production d'électricité de l'île.
The present work expresses the will of Caribbean researchers to improve the meso- and micro-meteorological scientific knowledge of the trade winds influenced island areas, and to develop research in these domains.It is well known that tropical hurricanes remain the most remarkable meteorological phenomena that affect the Caribbean islands. But some other phenomena, of smaller scale, such as intense rainfall events, swells, or air quality degradation, are of extreme importance for natural or health hazards. These examples show the need to use downscaling methods to exploit large scale meteorological or climatic information, and to obtain local and regional scenarios for the island areas. This is an important challenge, as sound scientific studies in these matters are eagerly expected. The aim of the research works exposed in the present dissertation is numerical simulation and analysis of the meso- and microscale mechanisms that induce diurnal and nocturnal local circulations in the Guadeloupe archipelago, using numerical meteorological models that are widely used in research and in operational forecasting.These works represent the first high-resolution (1 km to 111 m) numerical study of the lower atmosphere over the Guadeloupe archipelago. The Weather Research and Forecasting ARW 3.4 (WRF-ARW) model is used to simulate the troposphere from global scale to turbulence scale. Real cases of three typical weather types (80% of cases during a year) are examined during 48 hours : strong trade winds (STW), medium trade winds (MTW) and weak trade winds (WTW). These weather types are characterized by values of the local Froude number : 0.82 (STW), 0.41 (MTW) and 0.21 (WTW). Six domains have been selected for the dynamical downscaling : D01 (grid spacing of 27 km), D02 (grid spacing of 9 km), D03 (grid spacing of 3 km), D04 (grid spacing of 1 km), D05 (grid spacing of 333 m) and D06 (grid spacing of 111 m), including 70 vertical levels. The first four domains (D01 to D04) cover the Guadeloupe archipelago and are used in the meso-scale simulations with the planetary boundary layer scheme YSU (ensemble mean). Domain D05 (covering the Basse-Terre island and the middle of the archipelago) and domain D06 (covering the coastal and rural area of Le Petit Cul-de-Sac Marin and the urban area of Pointe-à-Pitre), are employed in the micro-scale simulation (LES) with the 3D TKE 1.5 order closure scheme. WRF has been 6 hourly reinitialized with the NCEP FNL global analyses (resolution of 1°). These simulations permitted to obtain 10-minutes meteorological variable fields with a very high resolution (111 m).Meso-scale and micro-scale model results have been evaluated with observational data from meteorological stations (field campaign Atmo-Mangrov, French Met Office).Once validated, the micro-scale model outputs have been used for the assimilation of the lagrangian particle dispersion model : FLEXPART. The coupling FLEXPART-WRF has been employed in domain D06, in order to analyze the dispersion of the nitrogen oxide plume emitted by the main power plant of the archipelago.

http://www.theses.fr/2014AGUY0735/document

Éditeur(s) : HAL CCSD
Résumé : International audience
Structure and evolution of networks have been areas of growing interest in recent years, especially with the emergence of Social Network Analysis (SNA) and its application in numerous fields. Researches on diffusion are focusing on network modeling for studying spreading phenomena. While the impact of network properties on spreading is now widely studied, involvement of network dynamicity is very little known. In this paper, we address the epidemiology context and study the consequences of network evolutions on spread of diseases. Experiments are conducted by comparing incidence curves obtained by evolution strategies applied on two generated and two real networks. Results are then analyzed by investigating network properties and discussed in order to explain how network evolution influences the spread. We present the MIDEN framework, an approach to measure impact of basic changes in network structure, and DynSpread, a 2D simulation tool designed to replay infections scenarios on evolving networks.
Database and Expert Systems Applications - 22nd International Conference, DEXA 2011, Toulouse, France, August 29 - September 2, 2011, Proceedings, Part II
Toulouse, France

hal-00614925
https://hal.archives-ouvertes.fr/hal-00614925
DOI : 10.1007/978-3-642-23091-2_49

Éditeur(s) : Ecole Nationale Supérieure Agronomique de Rennes
Résumé : Long-line fishing has been growing on the island of La Réunion since the beginning of the 1990s. The target species is the swordfish (Xiphias gladius), fished mainly in the tropical waters surrounding the island between longitudes 45 degree E and 60 degree E, and latitudes 17 degree S and 27 degree S. From 1998 to 2000, a finalised research programme enabled the collection of precise data concerning the lines' positions and the parameters of the fishing efforts: 3,602 nettings were thus informed by the catches (in numbers of individuals caught) and 12 descriptive variables of the effort. In parallel with this collection effort, satellite maps that described the ocean's landscape of this region of the Indian Ocean exploited by La Réunion's fisheries were made available to sailors and scientists. Extractions from these environmental variables were made at the fishing lines' positions, which allowed us to propose 20 variables describing the environmental conditions of swordfish catches applied to the nettings. In an early part of this study, after a descriptive analysis and a first selection of the variables, we used several GAM (Generalised Additive Models) to model the respective effects of effort and environmental variables on the variability of swordfish catches. We thus highlighted the predominance of factors linked to fishermen (fishing effort) on oceanographic factors in the explanation of this variability. Following these results, a summary on the biology and ecology of the swordfish was proposed in order to draw up hypotheses on the characteristics of this species' population in the Indian Ocean. The aspects linked to the individual behaviour and movements of the population were particularly highlighted. In a latter part of this study and in order to complete the empirical approach by an exploratory constructivist approach, we proposed a modelling tool in order to simulate the possible movements of individuals within the oceanic landscape described by the available satellite maps. After reading in the literature about the various forms of modelling the movements of the large pelagics, we developed an original computer modelling architecture of the multi-agent type that made it possible to manipulate in a dynamic way the satellite maps (and derived products), the individual movements of "animats" whose behaviours were based on this environmental information, and agents that clarify the process of long-line fishing in a geographical way. The computer model that was implemented (MUFINS, for MUlti-Fish INdian ocean Simulator) was next used by calibrating the behaviour of the animats on the real data originally from the analysis of commercial catches proposed in the first part, using robust techniques based on fuzzy logic. The results of the simulations were compared, on the one hand, with the large-scale hypotheses of movement proposed in the first part, and, on the other hand, to swordfish catches both real and corrected for the effect of the fishing effort modelled by the GAM models. Even if the results of these simulations in this study do not allow for proposing convincing interpretations of the underlying processes, the MUFINS tool showed its ability to address questions associated with the swordfish's behaviour in the tropical oceanic landscape and to the effects of scale transfers between the individual level and the collective level. We now envisage its use in a more operational framework, as an interface for dialogue between fishermen and scientists with a goal of sustainable management of the resource.
La peche palangriere s'est developpee a l'ile de La Reunion depuis le debut des annees 1990. L'espece cible est l'espadon (Xiphias gladius), principalement exploite dans les eaux tropicales autour de l'ile entre les longitudes 45 degree E et 60 degree E, et les latitudes 17 degree S et 27 degree S. De 1998 a 2000, un programme de recherche finalisee a permis de collecter des informations precises concernant les positions des lignes et les parametres de l'effort de peche : 3602 filages sont ainsi renseignes par les captures (en nombre d'individus captures) et 12 variables descriptives de l'effort. En parallele de cet effort de collecte, des cartes satellitales ont pu etre mises a la disposition des marins et des scientifiques, decrivant le paysage oceanique de cette region de l'ocean Indien exploitee par la pecherie reunionnaise. Des extractions de ces variables environnementales ont ete effectuees aux positions des lignes de peche, nous permettant de proposer 20 variables descriptives des conditions environnementales de captures d'espadon appliquees aux filages. Dans une premiere partie de ce travail, apres une analyse descriptive et une premiere selection des variables, on a modelise par plusieurs modeles GAM (Generalized Additive Models) les effets respectifs des variables d'effort et des variables environnementales sur la variabilite des captures d'espadon. On a ainsi mis en evidence la predominance des facteurs lies aux pecheurs (effort de peche) sur les facteurs oceanographiques dans le caractere explicatif de cette variabilite. A la suite de ces resultats, une synthese sur la biologie et l'ecologie de l'espadon a ete proposee afin de degager des hypotheses sur les caracteristiques de la population de cette espece dans l'ocean Indien. Les aspects lies au comportement individuel et aux deplacements de la population ont ete particulierement mis en evidence. Dans une deuxieme partie de ce travail et afin de completer l'approche empirique par une approche constructiviste exploratoire, nous avons propose un outil de modelisation afin de simuler les deplacements possibles d'individus au sein du paysage oceanique decrit par les cartes satellitales disponibles. Apres avoir passe en revue dans la litterature les differentes formes de modelisation des deplacements des grands, pelagiques, nous avons developpe une architecture originale de modelisation informatique de type multi-agents permettant de manipuler de maniere dynamique les cartes satellitales (et les produits derives), les mouvements individuels < d'animats >, dont les comportements sont bases sur cette information environnementale, et des agents qui explicitent le processus de capture palangriere de maniere geographique. Le modele informatique ainsi implemente (MUFINS, pour MUlti-Fish INdian ocean Simulator) a ensuite ete utilise en calibrant les comportements des animats sur les donnees reelles issues de l'analyse des captures commerciales proposee en premiere partie, a partir de techniques robustes basee sur la logique floue. Les resultats des simulations ont ete confrontes d'une part aux hypotheses de deplacement a grande echelle proposees en premiere partie, et d'autre part aux captures d'espadon reelles et corrigees de l'effet de l'effort de peche modelise par les modeles GAM. Meme si les resultats de simulations presentes dans ce travail ne permettent pas de proposer d'interpretations convaincantes des processus sous-jacents, l'outil MUFINS a demontre son aptitude a aborder les questions liees au comportement de l'espadon dans le paysage oceanique tropical et aux effets des transferts d'echelle entre le niveau individuel et le niveau collectif. On envisage desormais son utilisation dans un cadre plus operationnel, comme interface de dialogue entre les pecheurs et les scientifiques a des fins de gestion durable de la ressource.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2005/these-2592.pdf
http://archimer.ifremer.fr/doc/00000/2592/

Éditeur(s) : HAL CCSD
Résumé : Meteorological phenomena with scales lower than hurricanes, from extreme rainfalls to pollution peaks, represent important environmental and health risks in the Caribbean. These examples show the need to downscale large-scale meteorological data to island-scale fields.The main goal of the present numerical study is the analysis of the meso- and micro-scale mechanisms inducing diurnal and nocturnal circulations in the Guadeloupe archipelago. The Weather Research and Forecasting model is employed. The micro-scale results are obtained by the coupling of the 1-km simulated fields and the Large Eddy Simulation method. Then, in order to analyze the dispersion of a pollutants plume, the micro-scale outputs with 111 m of resolution are used to force the lagrangian particles dispersion model FLEXPART. The study has been conducted for three real cases of weather types linked with strong, medium and weak trade winds.The results of simulations, validated with available observed data, permitted to simulate all local circulations, including a nocturnal counter-current flow which may induce a pollution peak in the urban area of Pointe-à-Pitre city.These works, which may be applied to other Lesser Antilles islands, suggest many environmental and energy applications.
Les phénomènes météorologiques d'échelles inférieures aux cyclones, depuis les pluies intenses, jusqu'à la dégradation de la qualité de l'air, ont pour les Caraïbes une importance aiguë en termes de risques naturels ou de risques sur la santé. Ces exemples attestent de la nécessité d'utiliser des méthodes de descentes d'échelle pour exploiter l'information météorologique de grande échelle et dériver des scénarios locaux appliqués aux territoires insulaires. Les travaux présentés ont pour principaux objectifs la simulation numérique et l'analyse des mécanismes méso- et micro-échelles qui induisent des circulations locales diurnes et nocturnes sur l'archipel de la Guadeloupe, à l'aide du modèle numérique météorologique Weather Research and Forecasting. Les résultats des simulations micro-échelles sont obtenus par le couplage des champs modélisés à 1 km avec la méthode Large Eddy Simulation. Les sorties micro-échelles, à 111 m, sont ensuite utilisées pour forcer le modèle lagrangien de dispersion de particules FLEXPART afin d'étudier la dispersion d'un panache de polluants. L'étude a été menée pour trois cas réels de situations météorologiques correspondant à des alizés soutenus, moyens et faibles. Les résultats des simulations, après validation, et comparaison aux données d'observation disponibles, permettent de restituer l'ensemble des circulations locales et soulignent l'existence d'un écoulement nocturne à contre courant susceptible d'induire une forte pollution sur la zone urbaine de Pointe-à-Pitre. Cette étude, transposable aux autres îles des petites Antilles, laisse envisager de nombreuses applications environnementales et énergétiques.
https://hal.archives-ouvertes.fr/tel-01074600

Droits : info:eu-repo/semantics/OpenAccess
tel-01074600
https://hal.archives-ouvertes.fr/tel-01074600
https://hal.archives-ouvertes.fr/tel-01074600/document
https://hal.archives-ouvertes.fr/tel-01074600/file/rcece_thesis.pdf

Éditeur(s) : Montpellier 1
Résumé : Understanding bioaccumulation mechanisms of persistent organic pollutants (POPs) is a major issue for environmental risk assessment. In this work, polychlorinated biphenyls (PCBs), a model contaminant family, has been studied in the European hake (Merluccius merluccius), a high trophic level species from the Gulf of Lions. High concentrations of PCBs were measured in hake from this area compared to those encountered in the population of the Bay of Biscay. PCB biomagnification was highlighted along its food web from marine phytoplankton, suggesting a strong influence of diet on contamination levels. The role of other biological processes was also apprehended in order to understand the high variability of observed levels. Thus, growth, sex, and also the degree of sexual maturity appear as major factors explaining the measured concentrations in fish. A PCB bioaccumulation model in the hake, based on the Dynamic Energy Budget theory (DEB), was developed. This approach is based on a bioenergetic model, reproducing the main physiological functions of an organism (feeding, growth and reproduction), coupled with a kinetic model of contaminants. The growth and evolution of contamination levels of several PCB congeners during the life of male and female hakes is satisfactorily simulated, both in the Gulf of Lions and in the Bay of Biscay, validating the processes taken into account. This combined modelling approach appears well adapted to study the fate of contaminants in fish, and paves the way for a realistic understanding of their effects on major biological functions of fish.
La compréhension des mécanismes de bioaccumulation des contaminants organiques persistants (POP) est un enjeu majeur pour l'évaluation des risques environnementaux. Lors de ce travail, le devenir d'une famille de contaminants modèles, les polychlorobiphényles (PCB), a été étudié chez une espèce de rang trophique élevé du golfe du Lion, le merlu Européen (Merluccius merluccius). Des concentrations élevées en PCB ont été mesurées dans les merlus de ce secteur en comparaison à celles rencontrées dans la population du golfe de Gascogne. La mise en évidence d'une bioamplification des PCB le long de son réseau trophique, depuis le phytoplancton marin, suggère une influence importante de l'alimentation sur les niveaux de contamination. Le rôle d'autres processus biologiques a également été appréhendé afin de comprendre la forte variabilité des niveaux observés. Ainsi, la croissance, le sexe, mais également le degré de maturité sexuel apparaissent comme des facteurs explicatifs majeurs des concentrations en PCB mesurées dans les poissons. Un modèle de bioaccumulation des PCB chez le merlu, basé sur la théorie de Budget d'Energie Dynamique (DEB), a été développé. Il s'agit d'une approche basée sur le couplage d'un modèle bioénergétique, reproduisant les principales fonctions physiologiques de l'organisme (nutrition, croissance et reproduction), avec un modèle de cinétique des contaminants. La croissance et l'évolution des niveaux de contamination de plusieurs congénères de PCB au cours de la vie des merlus mâles et femelles est simulée de manière satisfaisante, tant dans le golfe de Gascogne que dans le golfe du Lion, validant ainsi les processus pris en compte. Cette approche combinée de modélisation apparaît tout à fait adaptée à l'étude du devenir des contaminants chez les poissons, et ouvre la voie à une compréhension réaliste de leurs effets sur les grandes fonctions biologiques de ces organismes.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2008/these-6490.pdf
http://archimer.ifremer.fr/doc/00000/6490/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tropical islands are characterized by thermal and orographical forcings which may generate microscale air mass circulations. The Lesser Antilles Arc includes small tropical islands (width lower than 50 km) where a total of one-and-a-half million people live. Air quality over this region is affected by anthropogenic and volcanic emissions, or saharan dust. To reduce risks for the population health, the atmospheric dispersion of emitted pollutants must be predicted. In this study, the dispersion of anthropogenic nitrogen oxides (NOx) is numerically modelled over the densely populated area of the Guadeloupe archipelago under weak trade winds, during a typical case of severe pollution. The main goal is to analyze how microscale resolutions affect air pollution in a small tropical island. Three resolutions of domain grid are selected: 1 km, 333 m and 111 m. The Weather Research and Forecasting model (WRF) is used to produce real nested microscale meteorological fields. Then the weather outputs initialize the Lagrangian Particle Dispersion Model (FLEXPART). The forward simulations of a power plant plume showed good ability to reproduce nocturnal peaks recorded by an urban air quality station. The increase in resolution resulted in an improvement of model sensitivity. The nesting to subkilometer grids helped to reduce an overestimation bias mainly because the LES domains better simulate the turbulent motions governing nocturnal flows. For peaks observed at two air quality stations, the backward sensitivity outputs identified realistic sources of NOx in the area. The increase in resolution produced a sharper inverse plume with a more accurate source area. This study showed the first application of the FLEXPART-WRF model to microscale resolutions. Overall, the coupling model WRF-LES-FLEXPART is useful to simulate the pollutant dispersion during a real case of calm wind regime over a complex terrain area. The forward and backward simulation results showed clearly that the subkilometer resolution of 333 m is necessary to reproduce realistic air pollution patterns in this case of short-range transport over a complex terrain area. Globally, this work contributes to enrich the sparsely documented domain of real nested microscale air pollution modelling. This study dealing with the determination of the proper resolution grid and proper turbulence scheme, is of significant interest to the near-source and complex terrain air quality research community.
ISSN: 1352-2310

hal-01349208
https://hal.archives-ouvertes.fr/hal-01349208
DOI : 10.1016/j.atmosenv.2016.05.028

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The negative impact of the man on the environment unquestionably increases. The coastal environment as a whole is the maritime environment which is the most exposed to man-made eutrophication. For instance, nitrate loads to coastal waters off Brittany (France) have increased 10 times (from 3 to s 30mg L-1NO3) during the four last decades. Eutrophication of this coastal zone is now a recurrent problem, more and more worrying. This eutrophication exhibits two main forms : " green tides ", which are caused by local proliferations and stranding of green macro-algae (particularly the Ulva species) in nitrogen-enriched areas ; phytoplanktonic blooms, which are responsible for coloured water events, toxic species can be present (Pseudo-Nitzschia, Alexandrium, Dinophysis), and induce banning of shellfish consumption. The objectives of this study are to assess the respective role of various rivers (especially the Loire and the Vilaine) in the eutrophication of the Brittany shelf ecosystem and test the impact of nitrogen enrichment in the triggering of Pseudo-Nitzchia toxicity. For these purposes, a coupled hydrodynamical/ biogeochemical 3D model has been developed and validated against past measured time-series and satellite images. After a brief analysis of primary production over the Brittany shelf under different conditions, we show a description of the real time adaptation of this model. Daily results are currently presented in real time on www.previmer.org web site. The inability of the model to correctly simulate near shore phytoplankton is worsened in this model by the fact that the turbidity field used is a climatological one, made by satellite images averaged on a decadal basis. First, near shore pixels of satellite images are scarcely reliable, secondly a climatological mean cannot represent the sudden bursts or drops of the real turbidity, highly dependent on the actual sea-state : this can explain also why the model at this moment fails to reproduce a sudden bloom occurring in a short period of sunny and calm weather. The simulated Pseudo-Nitzschia biomass and induced risk of toxicity in the water column cannot really be validated offshore, because monitoring measurements are available only near the coast, and deal only with toxicity in benthic filter feeders. To get temporarily rid of that problem, an interesting improvement would be to add to the operational model the bio-accumulation of toxin in the shellfishes : simulated concentrations in shellfish fresh would become directly comparable with usual measurements of the monitoring networks. Our model points out the important impact of Loire river loads on the primary production on the western and southern Brittany. This result is crucial for administrations in charge of reducing the terrestrial loadings responsible for eutrophication, because it can delay reduction programs on small tributaries until the main input from the Loire has been significantly reduced. A question arises, about the reliability of the haline stratification in the model, because the horizontal extent of the Loire plume will be enhanced by a stronger stratification.
L'eutrophisation des milieux marins côtiers, de plus en plus importante, représente un des impacts majeurs des activités humaines sur l'environnement. Les phénomènes d'eutrophisation sont en constante augmentation ; ces dernières décennies ont vu le nombre de sites touchés augmenter de par le monde. La bande côtière bretonne est particulièrement concernée par ce phénomène. L'eutrophisation s'y manifeste de deux façons : "Des phénomènes de marée vertes, très localisées, qui sont provoqués par la croissance excessive et l'échouage de macro-algues du genre Ulva dans ces zones riches en azote ; Des blooms de phytoplancton à l'origine des phénomènes d'eaux colorées, qui peuvent aussi provoquer des interdictions de consommation de coquillages lorsque les espèces mises en jeu sont toxiques (Pseudo-Nitzschia, Alexandrium, Dinophysis). L'objectif de ce travail est multiple : il vise à mettre en évidence et à comprendre l'impact et le rôle des apports en nutriments sur la production primaire et l'eutrophisation des milieux côtiers. Ce travail a aussi pour ambition l'identification et la compréhension des causes des phénomènes d'eutrophisation et permettre ainsi d'apporter des solutions ou des pistes d'amélioration. En n, il a aussi un objectif de prévision à court terme de l'état biologique sur la zone. Pour atteindre ces objectifs, un modèle en temps réel a été mis en oeuvre. Les résultats de simulations numériques et de mesures satellitaires sont présentés sur internet : www.previmer.org. L'outil principal de ce travail est un modèle couplé physique/biogéochimie. La partie hydrodynamique est fournie par le code Mars3D (3D hydrodynamical Model for Application at Regional Scale) développé à IFREMER. Au code hydrodynamique Mars3D est couplé le modèle des cycles de l'azote, du phosphore et du silicium d'IFREMER. Le modèle couplé permet de simuler en 3 dimensions et de manière dynamique les courants, le brassage horizontal et vertical, les champs de température et de salinité, mais aussi les principaux cycles de nutriments, reproduisant ainsi les conditions déterminantes de la production primaire. La croissance des algues est modélisée, et nous permet de voir l'influence des panaches de dilution des principales rivières bretonnes sur leur croissance. Les diffcultés du modèle à correctement simuler les concentrations en phytoplancton près des zones côtières, sont probablement dues à l'utilisation d'une climatologie de concentration en matière en suspension fondée sur des données satellitaires. Tout d'abord, les pixels côtiers des images satellitaires sont entachés d'erreurs, ensuite une climatologie n'est pas capable de représenter les apports soudains des fleuves lors des crues. Cela peut expliquer l'incapacité du modèle a représenter certains blooms liés à des périodes ensoleilées et calmes. A ce modèle de base nous avons ajouté un genre spécifique de phytoplancton : le genre Pseudo-Nitzschia. Certaines espèces de Pseudo-Nitzschia sont réputées toxiques. En effet, ce phytoplancton a la capacité de synthétiser une toxine : l'acide domoïque. Cette toxine est responsable du syndrome ASP (Amnesic Shellfish Poisoning). Le modèle reproduit globalement les mêmes zones de toxicité que les mesures du REPHY, et donne des résultats encourageants. L'étude montre que la Loire influence une large partie de la bande côtière bretonne ; son panache remonte jusqu'au nord de la mer d'Iroise, et contribue pour une grande part à l'enrichissement du sud et de l'ouest de la Bretagne. Le traçage de l'azote en provenance de la Loire au sein des cycles biogéochimiques nous a permis de quantifier cet enrichissement.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00015/12603/9481.pdf
http://archimer.ifremer.fr/doc/00015/12603/

Éditeur(s) : Elsevier
Résumé : The Nephrops trawl fishery is one of the most important fisheries in the Bay of Biscay. The fishery management essentially relies on conservation measures, a total at I owed catch (TAC) for Nephrops together with a mini mum landing size (MLS) and minimum trawl mesh size (70 mm stretched mesh). These measures have failed to prevent high discard levels of many species that characterize the fishery. Nephrops trawlers thus discard about half of their Nephrops catches in numbers (a third in weight) of which only 30% survive. Nephrops discards mainly occur in younger Nephrops age groups below the MLS. This is a waste for the already overexploited Nephrops stock as well as for the fleet. Based on a bio-economic simulation model, the paper analyses the consequences of several scenarios of improving Nephrops selectivity. The potential impacts of these scenarios on Nephrops biomass, landings, discards and economic indicators (e.g. rent) are examined and a cost-benefit analysis of each scenario is carried out. We show that a better exploitation pattern would benefit fisheries that have high level of discards. Reducing non-commercial Nephrops discards leads to positive net present values of rent with better value realized from the production potential and limited short-term losses for the fishing units. By taking account of the economic dynamics of increasing effort however, we show that selectivity measures are insufficient. Regulating access to the fishery is also required to ensure the sustainability of the fishery and a better exploitation of the production potential. (C) 2008 Elsevier B.V. All rights reserved.
Fisheries Research (0165-7836) (Elsevier), 2008-07 , Vol. 92 , N. 1 , P. 76-89

Droits : 2008 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2008/publication-4478.pdf
DOI:10.1016/j.fishres.2007.12.021
http://archimer.ifremer.fr/doc/00000/4478/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Several studies, both theoretical and experimental, show that sedimentary rocks have fractal pore-grain interface. The real rocks are 3-d structures with highly tortuous and often fractal pore spaces. Before attempting simulation of this daunting geometry, we present here, as a preliminary study, a simpler 2-d version. In this paper, a computer simulated 2-d sedimentary rock structure is generated by the relaxed bidisperse ballistic deposition model. Grains of two different sizes are dropped ballistically on a linear substrate. By changing the fraction of the two types of particles, the porosity of the rock structure can be tuned. The structure undergoes compaction through the relaxation of possible unstable overhangs. The micro structure of the pore space is investigated. The pore mass and the rock-pore interface show a fractal behaviour with the same fractal dimension indicating that the pore volume is a fractal. Our simulation results indicate that the process of compaction of grains during the deposition process seems to erase the dependency of the fractal dimension on the grain size distribution. The two point density correlation is measured for the pore space. It shows anisotropy which is an outcome of the growth rule. X-ray tomography of two-dimensional sections of real sedimentary rocks obtained from Mallorca Island is subjected to the same study and the results compared with those obtained from simulation. The simulation results agree qualitatively with the real rock sample. We also study diffusion on the pore space. Diffusion is found to be anomalous as is expected in fractal spaces. It also bears the signature of anisotropy of the structure. Diffusion studies on the real rock sample could not yield conclusive results as the system size is not large enough.
ISSN: 0926-9851

hal-00761818
https://hal.archives-ouvertes.fr/hal-00761818
DOI : 10.1016/j.jappgeo.2012.09.002

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Benthic microbial fuel cells (BMFCs) are continuous electricity generators using electroactive microorganisms and organic matter from aquatic environment, respectively, as catalysts and substrate. In this paper, first a low-cost PVC-made structure is constructed to harvest electricity from mangrove environment located in French Guiana. An in situ BMFC has given power density of 30 mW/m2 of the anodic surface area. This performance has been confirmed by experience in laboratory where inter-electrode distance and electrode surface area appeared to be power increasing factors. However, the output power of one BMFC is not used to supply real devices such as autonomous sensors. Second, to meet this expectation, in parallel and in series associations were considered. These associations were made in order to increase the output voltage and consequently the power, to reach levels that can supply small sensors (about 3 V). Finally, to improve the performance of the series association and to avoid the voltage reversal phenomenon, a voltage balancing circuit was simulated and added to the series connections. With balancing method, the cell voltage of BMFCs can be equalized, and the performances can be improved. This allows an optimal energy harvesting and a better global efficiency of the set.
ISSN: 0363-907X

hal-01683128
https://hal.univ-antilles.fr/hal-01683128
DOI : 10.1002/er.3270

Éditeur(s) : HAL CCSD Elsevier
Résumé : This paper presents a numerical investigation on the mechanical behavior of cemented granular materials by means of discrete element simulations. In particular, two conceptual elements of this behavior were explored: the yield surfaces and the plastic potentials, as defined in the framework of elastoplastic constitutive models. For this purpose, we implemented a contact model that mimics the mechanical behavior of cemented bonds, we constructed a set of polydisperse samples with different solid fractions, and we tested these samples by means of a biaxial device with four rigid walls. The yield surfaces and plastic potentials were thus obtained and analyzed as functions of the solid fraction of the material, drawing interesting conclusions, confirming previous experimental findings, and, consequently, evidencing the great potential of discrete element simulations in exploring the behavior of real cemented geomaterials.
ISSN: 0266-352X

hal-00853748
https://hal.archives-ouvertes.fr/hal-00853748
DOI : 10.1016/j.compgeo.2012.11.001

Éditeur(s) : HAL CCSD
Résumé : International audience
Traditional network generation models aim to replicate global structural properties observed on various real-world networks (power law degree distribution, short average distance, community structure, etc.) through synthetic link formation mechanisms such as triadic closure or preferential attachment. Nowadays the large amount of data available allows to study more precisely the link formation processes and to compare the models to real situations. In this work, we analyse the communication activities of the users of a mobile telephony operator for studying the link formation process. The communications emitted and received by users are strong indicators for understanding the underlying mechanisms of the link formation process and highlighting how user attributes correlate with the formation process in such a network. In a first study conducted at a global level we show that the traditional mechanisms commonly used in network generation models are not the main link formation mechanisms involved in this network. In a second study, we analyse more precisely the link formation process by searching for correlations between some user attributes and the formation of the new links. These results provide valuable guidelines to the design of more realistic generation models taking into account network structure and node attributes.
IEEE International Conference on Research Challenges in Information Science (RCIS)
Marrakesh, Morocco

hal-01312314
https://hal.archives-ouvertes.fr/hal-01312314
DOI : 10.1109/RCIS.2014.6861065

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : The properties of the subduction interplate domain are likely to affect not only the seismogenic potential of the subduction area but also the overall subduction process, as it influences its viability. Numerical simulations are performed to model the long-term equilibrium state of the subduction interplate when the diving lithosphere interacts with both the overriding plate and the surrounding convective mantle. The thermomechanical model combines a non-Newtonian viscous rheology and a pseudo-brittle rheology. Rock strength here depends on depth, temperature and stress, for both oceanic crust and mantle rocks. I study the evolution through time of, on one hand, the brittle-ductile transition (BDT) depth, zBDT, and, on the other hand, of the kinematic decoupling depth, zdec, simulated along the subduction interplate. The results show that both a high friction and a low ductile strength at the asthenospheric wedge tip shallow zBDT. The influence of the weak material activation energy is of second order but not negligible. zBDT becomes dependent on the ductile strength increase with depth (activation volume) if the BDT occurs at the interplate decoupling depth. Regarding the interplate decoupling depth, it is shallowed (1) significantly if mantle viscosity at asthenospheric wedge tip is low, (2) if the difference in mantle and interplate activation energy is weak, and (3) if the activation volume is increased. Very low friction coefficients and/or low asthenospheric viscosities promote zBDT = zdec. I then present how the subducting lithosphere age affects the brittle-ductile transition depth and the kinematic decoupling depth in this model. Simulations show that a rheological model in which the respective activation energies of mantle and interplate material are too close hinders the mechanical decoupling at the down-dip extent of the interplate, and eventually jams the subduction process during incipient subduction of a young (20-Myr-old) and soft lithosphere under a thick upper plate. Finally, both the BDT depth and the decoupling depth are a function of the subducting plate age, but are not influenced in the same fashion: cool and old subducting plates deepen the BDT but shallow the interplate decoupling depth. Even if BDT and kinematic decoupling are intrinsically related to different mechanisms of deformation, this work shows that they are able to interact closely. Comparison between modelling results and observations suggests a minimum friction coefficient of 0.045 for the interplate plane, even 0.069 in some cases, to model realistic BDT depths. The modelled zdec is a bit deeper than suggested by geophysical observations. Eventually, the better way to improve the adjustment to observations may rely on a moderate to strong asthenosphere viscosity reduction in the metasomatised mantle wedge.
ISSN: 1869-9510

hal-00795559
https://hal.archives-ouvertes.fr/hal-00795559
DOI : 10.5194/se-3-467-2012, 2012

Éditeur(s) : HAL CCSD
Résumé : International audience
EmailPrintRequest PermissionsThe emergence of new communication means such as online newspapers and exchange and sharing websites allow us to go further in the understanding of diffusion phenomena. Indeed, these public discussion areas are now firmly established in our societies and are known to be strong sensors of both human behaviors and collective feelings. In this paper we focus on diffusion phenomena that occur on Twitter and we propose a set of measures that aims to characterize globally and locally the processes. Our objective is to identify what are the conditions in which a person decides to forward the information. Our measures have been used to study two events occurred in January 2015: the presentation of Microsoft HoloLens, a new augmented reality headset, and the political election in Greece. The results obtained show a strong heterogeneity in the individual behaviours involved in the diffusion process. Our approach has been implemented into a graphical tool which is able to conduct real time analysis on any kind of topics occurring on Twitter.
IEEE International Conference on Research Challenges in Information Science (RCIS)
Athens, Greece

hal-01312382
https://hal.univ-antilles.fr/hal-01312382
DOI : 10.1109/RCIS.2015.7128894

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To evaluate the performance of downhole and surface geophysical monitoring methods, a series of shallow gas injection-monitoring experiments has been performed in a coastal saline aquifer at Maguelone, France. The recorded data include pressure measurements with a Westbay multilevel completion and CO2 saturation at an observation well derived from electrical resistivity with a modified Waxman-Smits (MWS) model. In this work, the aim is to develop a simulation model capturing the gas transport behavior and consistent with field data. For this purpose, the simulation of the CO2 injection experiment is carried out with two conceptual models, a homogeneous model and a heterogeneous model treated with multiple realization Monte Carlo simulations. Numerical simulator TOUGH2 with the equation of state module EOS7C is used for the simulations. Comparison of the model results with field data suggests that the pressure responses are captured with relatively good accuracy. Similarly, the model also provides an overall reasonable agreement and correct order of magnitude for predicted gas saturation values. However, as the heterogeneity pattern in the field data remains largely unknown, the model predictions can only be used to capture the mean behavior as well as to provide insights into how heterogeneity can influence the system behavior, by means of sensitivity analyses of the influence of heterogeneities on individual realizations.
ISSN: 1750-5836

hal-01467240
https://hal.archives-ouvertes.fr/hal-01467240
DOI : 10.1016/j.ijggc.2016.09.006

Éditeur(s) : HAL CCSD Kluwer
Résumé : This paper presents some considerations about hybrid optimization algorithms useful to optimize real complex system. The given indication could be used by readers to conceive hybrid algorithms. These considerations have been deducted from a concrete application case: the satellites constellations design problem. But each of the advanced techniques proposed in this paper are considered in a more general way to solve other problems. This problem is used to illustrate the techniques along the paper because it is grouping many characteristics (di culties) of contemporary real complex systems: the size and the characteristics of the search space engendered by a combinatorial problem; The irregularity of the criterions; The mathematical and physical heterogeneity of parameters forbids the use of classical algorithms; The evaluation of a solution, which uses a time consuming simulation; A need of accurate values. More details are available in previous papers ([?], [?], [?], [?]). For these reasons, we could learn a lot from this experiment in order to detach hybrid techniques usable for problems having close characteristics. This paper presents the historic leading to the current algorithm, the modeling of the complex system and the sophisticated algorithm proposed to optimize it. Application cases and ways to built signi cant tests of hybrid algorithm are also given.
International Federation for Information Processing

hal-00602279
https://hal.archives-ouvertes.fr/hal-00602279

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
1. The Before-After Control-Impact Paired Series (BACIPS) design distinguishes natural spatial and temporalvariability from variation induced by an environmental impact (or intervention) of interest. BACIPS is a powerfultool to derive inferences about interventions when classic experimental approaches (e.g. which rely on spatialreplicates and random assignment of treatments) are not feasible or desirable. Previously applied BACIPSdesigns generally assume that effects are sudden, constant and long-lived: that is, that systems exhibit ‘stepchanges’in response to interventions. However, complex ecological interactions or gradual interventions maycreate delayed and/or progressive responses, potentially impeding the reliability of classic (step-change) analyses.2. We propose a novel approach, the Progressive-Change BACIPS, which generalizes and expands the scope ofBACIPS analyses.We evaluate the relative performance of this approach using both simulated and real data thatexhibit step-change, linear, asymptotic and sigmoid responses following an intervention.We quantify the statisticalpower and accuracy of the Progressive-Change BACIPS under varying initial population densities, intensityof spatial sampling, effect sizes and number of sampling dates After the intervention.3. We show that Progressive-Change BACIPS identified the correct model among the set of candidate modelsunder most conditions and led to accurate estimates of the parameters that were used to generate the simulateddata. When data were sparse, and the dynamics complex, simpler (more parsimonious) models were favouredover the more complex models that actually generated the simulated data. Application of the Progressive-Change BACIPS to existing data sets from the literature led to strong support for specific models (over alternatives)and led to more specific inferences than possible under the classic BACIPS approach.4. The Progressive-Change BACIPS proposed here is more flexible than the original BACIPS formulationbecause the data are used to inform the form of the final model, rather than having the form of the modelimposed on the data. This leads to better estimates of the effects of environmental impacts and the time-scalesover which they operate. As a result, the Progressive-Change BACIPS should be applicable to a wide range ofstudies and should help improve investigation of time-dependent effects. R code to perform Progressive-ChangeBACIPS analysis is provided.
ISSN: 2041-210X

hal-01416668
https://hal-univ-perp.archives-ouvertes.fr/hal-01416668
DOI : 10.1111/2041-210X.12655