Éditeur(s) : Université des Antilles AREBio Groupe de recherche BIOSPHERES : BIOlogie, Sciences Physiques & Humaines pour les énergies Renouvelables, l
Extrait de : 1er colloque international BIOSPHERES, du 18 au 20 juin 2019. Université des Antilles
Description : Antarctica is a continent of enigmas. Stunning geographic beauty belies its inhospitable climate. Covered a mile thick in ice, it is the world's largest desert. Fossil ferns found in its mountains speak of its prehistory as a tropical rainforest, but now is largely devoid of life. Its most famous inhabitant, the penguin, is thought of as a flightless bird, but soars underwater much as a falcon glides the sky. Perhaps one of the greatest enigmas is the contrast between the terrestrial and marine environments. On land, monochromatic snow and ice support little life, yet the sea teams with life, life that expresses itself with the full rainbow of colors. Color is but one manifestation of chemical ecology. The Antarctic benthos supports an extensive community of predators and prey, competitors and facilitators. A harsh geographic history has contributed to marine diversification and enhanced what we now recognize as a rich flora and fauna, commensurate in some instances with temperate kelp forests and even approaching the richness of tropical marine environments. Not surprisingly, Antarctic benthic ecology is highly dependent on chemical mediation of interspecific interactions, interweaving chemodiversity with biodiversity in a classical yin and yang feedback loop. The evolution of selective chemical defenses facilitates drug discovery research, producing suites of metabolites that inform structure-activity studies and add breadth to bioactivity profiles. This presentation will focus on recent and contextual research from our lab which has demonstrated the potential for new biomedical lead molecules and scaffolds from these difficult to access biological resources.

Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V19067
V19067

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
We present here a synthesis of the evolution of rifted continental margin systems in the Gulf of Aden. These margins are volcanic to the west of the Gulf of Aden, where they are influenced by the Afar hotspot, and non-volcanic east of longitude 46° E. The combined use of magnetics, gravity, seismic reflection, field observations (tectonic, stratigraphic and sedimentological) and oil well data allowed us to obtain better constraints on the timing of continental rifting and seafloor spreading. From the Permo-Triassic to the Oligocene, the Arabian-African plate was subject to distributed extension, probably due, at least from the Cretaceous, to tensile stresses related to the subduction of the Tethysian slab in the north. In Late Eocene-Early Oligocene, 34-33 Ma ago, rifting started to localise along the future area of continental breakup. Initially guided by the inherited basins, continental rifting then occurred synchronously over the entire gulf before becoming localised on the northern and southern borders of the inherited grabens, in the direction of the Afar hotspot. In the areas with non-volcanic margins (in the east), the faults marking the end of rifting trend parallel to the inherited grabens. Only the transfer faults cross-cut the inherited grabens, and some of these faults later developed into transform faults. The most important of these transform faults follow a Precambrian trend. Volcanic margins were formed in the west of the Gulf, up to the Guban graben in the southeast and as far as the southern boundary of the Bahlaf graben in the northeast. Seaward dipping reflectors can be observed on many oil industry seismic profiles. The influence of the hotspot during rifting was concentrated on the western part of the gulf. Therefore, it seems that the western domain was uplifted and eroded at the onset of rifting, while the eastern domain was characterised by more continuous sedimentation. The phase of distributed deformation was followed by a phase of strain localisation during the final rifting stage, just before formation of the Ocean-Continent Transition (OCT), in the most distal graben (DIM graben). About 20 Ma ago, at the time of the continental break-up, the emplacement of the OCT started in the east with exhumation of the subcontinental mantle. Farther west, the system was heated up by the strong influence of the Afar hotspot, which led to breakup with much less extension. In the Gulf of Aden (s.str), up to the Shukra El Sheik fracture zone, oceanic spreading started 17.6 Ma ago. West of this fracture zone, oceanic accretion started 10 Ma ago, and 2 Ma ago in the Gulf of Tadjoura. Post-rift deformation of the eastern margins of the Gulf of Aden can be seen in the distal and proximal domains. Indeed, the substantial post-rift uplift of these margins could be associated with either the continental break-up, or activity of the Afar hotspot and related volcanic/magmatic activity. Uplift of the northern proximal margin was still active (e.g. stepped beach rocks exposed at 60 m of 2 Ma; 30 m of 35,200 years; 10 and 2 m) and active volcanoes can be inferred at depths of between 70 and 200 km beneath the margin (at 5-10 km distance from the coast). On the distal margin, heat flow measurements show a high value that is associated with post-rift volcanic activity and the development of a volcano (with flows and sills) shortly after the formation of the OCT. The Afar hotspot is therefore important for several reasons. It allows the localisation of deformation along the Red Sea/Aden system and the rapid opening of the Gulf after the continental break-up; its influence also seems to persist during the post-rift period.
ISSN: 1866-7411

hal-01053089
https://hal.archives-ouvertes.fr/hal-01053089
DOI : 10.1007/s12517-011-0475-4

Éditeur(s) : Yale University
Résumé : Sea-surface temperature images of the coastal upwelling regions off Northwest Africa show that the core of upwelling is sometimes located far from the coast. This has been documented in three regions that share a common feature, namely a wide and shallow continental shelf. This upwelling feature plays a key role in the ecology of the Canary Current System. It creates an innerfront which provides retention for biological material, e.g. fish eggs and larvae, in the highly productive nearshore environment. An analytical model has been developed based on a two dimensional extension of Ekman's solution. The linear and steady response of a homogeneous ocean forced by an upwelling-favorable wind provides a mechanism for the upwelling separation from the coast. The merging of the surface and bottom Ekman layers induces a very weak cross-shore circulation and a "kinematic barrier" for the Ekman transport divergence. In the case of an alongshore wind, the barrier is located near the isobath h ≈ 0.4D, where D is the thickness of Ekman layers. This yields an upwelling cell which is essentially concentrated in the region 0.5D < h < 1.25D, with upwelling occurring preferentially near the isobath h ≈ 0.6D. It turns out that the cross-shore width of upwelling scales with D/S, the ratio of Ekman depth to bottom topographic slope. The application of this solution to real bathymetric profiles rationalizes, not only the offshore upwelling observations in Northwest Africa, but also the influence of topography on the cross-shelf structure of a wind-driven coastal upwelling. The model also quantifies the effect of the cross-shore wind component showing how it drives the nearshore pressure gradient adjustment and how it affects the upwelling. A linear numerical experiment reproduces the theoretical steady solution, thereby allowing investigation of the transient regime. Relaxation of the hypothesis in the numerical model validates the linear assumption of the theory and then allows investigation of the sensitivity to friction parameterizations and the influence of stratification. The latter leads to an "oscillation" of the upwelling cell with seaward migration driven by outcropping and homogeneization of the water column, and, coastal incursion driven by a "boundary layers splitting" process caused by shoreward advection of the isopycnal dome and stratification of the inner shelf.
Journal of Marine Research (Yale University), 2008-09 , Vol. 66 , N. 5 , P. 589-616

Droits : 2008 Yale University
http://archimer.ifremer.fr/doc/2008/publication-6334.pdf
DOI:10.1357/002224008787536790
http://archimer.ifremer.fr/doc/00000/6334/

Éditeur(s) : Elsevier
Résumé : High P-wave velocities (7.1-7.8 km/s) lower crustal bodies (LCBs) imaged along volcanic margins are commonly interpreted as plume and break-up-related thick mafic underplating. This interpretation is partly challenged in this paper based on new seismic observations and modelling of the outer Voring Basin (Norway). An exceptional strong amplitude reflection, the T Reflection, is particularly well defined below the North Gjallar Ridge (NGR) between 7 and 8 s TWT. The T Reflection is located near the volcanic lava flows emplaced during the NE Atlantic breakup (similar to 55-54 Ma ago) and coincides with the top of the LCB, forming a mid-crustal dome. Based on structural and temporal relationships, we show that the dome clearly influences the structural development of the NGR and predates the continental breakup at least by 10-15 Ma. Using a thermo-kinematical model, we tried also to investigate and quantify the relationships between the extension, LCB and the magmatic production. Modelling suggests that significant Paleocene-Early Eocene magmatism can be produced without any temperature anomaly in the mantle if differential stretching occurs during the break-up initiation. The conclusion of 2D thermo-kinematical parametric analysis is that the magmatic model predicts, either little extension (beta < 2) with no melting or high extension (beta > 5) with significant melting along the outer Voring Basin. We suggest that the continental part of the LCB could not necessarily be breakup-related and so magmatic, as has often been stated previously. It is concluded here that the continental part of the LCB observed beneath the outer Voring Basin may be partly (or fully) attributed to inherited, high-pressure granulite/eclogite lower crustal rocks. The real amount of mafic material emplaced along the outer Voring Basin could be 20-40% less than thought.
Tectonophysics (0040-1951) (Elsevier), 2006 , Vol. 412 , N. 3-4 , P. 255-278

Droits : 2005 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-1042.pdf
DOI:10.1016/j.tecto.2005.10.038
http://archimer.ifremer.fr/doc/00000/1042/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We analyse P-wave receiver functions across the western Gulf of Aden and southern Red Sea continental margins in Western Yemen to constrain crustal thickness, internal crustal structure and the bulk seismic velocity characteristics in order to address the role of magmatism, faulting and mechanical crustal thinning during continental breakup. We analyse teleseismic data from 21 stations forming the temporary Young Conjugate Margins Laboratory (YOCMAL) network together with GFZ and Yemeni permanent stations. Analysis of computed receiver functions shows that (1) the thickness of unextended crust on the Yemen plateau is ∼35km; (2) this thins to ∼22km in coastal areas and reaches less than 14km on the Red Sea coast, where presence of a high-velocity lower crust is evident. The average Vp/Vs ratio for the western Yemen Plateau is 1.79, increasing to ∼1.92 near the Red Sea coast and decreasing to 1.68 for those stations located on or near the granitic rocks. Thinning of the crust, and by inference extension, occurs over a ∼130-km-wide transition zone from the Red Sea and Gulf of Aden coasts to the edges of the Yemen plateau. Thinning of continental crust is particularly localized in a <30-km-wide zone near the coastline, spatially co-incident with addition of magmatic underplate to the lower crust, above which on the surface we observe the presence of seaward dipping reflectors (SDRs) and thickened Oligo-Miocene syn-rift basaltic flows. Our results strongly suggest the presence of high-velocity mafic intrusions in the lower crust, which are likely either synrift magmatic intrusion into continental lower crust or alternatively depleted upper mantle underplated to the base of the crust during the eruption of the SDRs. Our results also point towards a regional breakup history in which the onset of rifting was synchronous along the western Gulf of Aden and southern Red Sea volcanic margins followed by a second phase of extension along the Red Sea margin.
ISSN: 0956-540X

hal-00825194
https://hal.archives-ouvertes.fr/hal-00825194
https://hal.archives-ouvertes.fr/hal-00825194/document
https://hal.archives-ouvertes.fr/hal-00825194/file/RF_Hakim2012_GJI.pdf
DOI : 10.1093/gji/ggt072

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In East Asia, widespread extensional sedimentary basins together with the close association of Metamorphic Core Complexes and magmatism are prominent features of the large-scale wide rift system developed during late Mesozoic times. This region thus appears as a proper place to study continental extension as well as questions about the link between continental extension and magmatism. This paper primarily provides pioneer exhumation time-constraints on the Linglong MCC (Jiaodong Peninsula) including cooling and deformation ages. MCC cooling at mid-crustal levels occurred at ca. 143 Ma. Besides, last ductile deformation occurred at ca. 134 Ma while final exhumation stages, under brittle 2 conditions, occurred as late as ca. 128 Ma. Continuous crustal stretching were then recorded by the emplacement of a synkinematic pluton in the upper crust at ca. 128 Ma that cooled fast below an intracrustal shear zone crossing the ductile-brittle transition at ca. 123 Ma. The ca. 120-118 Ma age cluster is ascribed to the fast cooling of undeformed plutons marking the end of extension that lasted, in the area, over a minimum period of ca. 30 My. Combining other MCC exhumation constraints and the onset of subsidence in the sedimentary basins, total duration of late Mesozoic extension in East Asia could be estimated at ca. 60 My, related with a rather long process for extension from 160 to at least 100 Ma. East Asian continental extension is heterogeneously distributed in space and time as revealed by fundamental differences between two end-member classes of migmatite-cored MCC already described in other wide rift systems. Extension seems to have first favoured partial melting which subsequently, in turn, maintained continental extension.
ISSN: 1342-937X

insu-00752551
https://hal-insu.archives-ouvertes.fr/insu-00752551
https://hal-insu.archives-ouvertes.fr/insu-00752551/document
https://hal-insu.archives-ouvertes.fr/insu-00752551/file/Charles_et_al_Gondwana_Research_2012.pdf
DOI : 10.1016/j.gr.2012.10.011

Éditeur(s) : Elsevier Science Bv
Résumé : The breakup of Pangea and onset of growth of the Pacific plate led to several paleoenvironmental feedbacks, which radically affected paleoclimate and ocean chemistry during the Jurassic. Overall, this period was characterized by intense volcanic degassing from large igneous provinces and circum-Panthalassan arcs, new oceanic circulation patterns, and changes in heat and humidity transports affecting continental weathering. Few studies, however, have attempted to unravel the global interactions linking these processes over the long-term. In this paper, we address this question by documenting the global changes in continental drainage and surface oceanic circulation for the whole Jurassic period. For this purpose, we present 53 new neodymium isotope values (εNd(t)) measured on well-dated fossil fish teeth, ichthyosaur bones, phosphatized nodules, phosphatized ooids, and clastic sediments from Europe, western Russia, and North America. Combined with an extensive compilation of published εNd(t) data, our results show that the continental sources of Nd were very heterogeneous across the world. Volcanic inputs from a Jurassic equivalent of the modern Pacific Ring of Fire contributed to radiogenic εNd(t) values (− 4 ε-units) in the Panthalassa Ocean. For the Tethyan Ocean, the average surface seawater signal was less radiogenic in the equatorial region (− 6.3), and gradually lower toward the epicontinental peri-Tethyan (− 7.4), western Russian (− 7.4) and Euro-Boreal seas (− 8.6). Different Nd sources contributed to this disparity, with radiogenic Nd influxes from westward Panthalassan currents or juvenile volcanic arcs in open oceanic domains, and substantial unradiogenic inputs from old Laurasian and Gondwanan shields for the NW Tethyan platforms. Overall, the εNd(t) values of Euro-Boreal, peri-Tethyan, and western Russian waters varied quite similarly through time, in response to regional changes in oceanic circulation, paleoclimate, continental drainage, and volcanism. Three positive shifts in εNd(t) values occurred successively in these epicontinental seas during the Pliensbachian, in the Aalenian-Bathonian interval, and in the mid-Oxfordian. The first and third events are interpreted as regional incursions of warm surface radiogenic currents from low latitudes. The Aalenian-Bathonian shift seems linked to volcanic outbursts in the NW Tethys and/or circulation of deep currents resulting from extensional events in the Hispanic Corridor and reduced influences of boreal currents crossing the Viking Corridor. In contrast, the εNd(t) signals decreased and remained very low (< − 8) during the global warming events of the Toarcian and Late Oxfordian - Early Tithonian intervals. In these greenhouse contexts, a latitudinal expansion of humid belts could have extended the drainage pathways toward boreal Nd sources of Precambrian age and increased the supply of very unradiogenic crustal-derived inputs to seawater. Finally, a brief negative εNd(t) excursion recorded in parallel with regional drops in seawater temperature suggests that southward circulation of cold unradiogenic Arctic waters occurred in the NW Tethys in the Callovian - Early Oxfordian. All these results show that changes in surface oceanic circulation resulting from the Pangean breakup could have regionally impacted the evolution of seawater temperatures in the NW Tethys.
Gondwana Research (1342-937X) (Elsevier Science Bv), 2015-06 , Vol. 27 , N. 4 , P. 1599-1615

Droits : 2014 International Association for Gondwana Research. Published by Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00179/29015/27443.pdf
DOI:10.1016/j.gr.2014.02.006
http://archimer.ifremer.fr/doc/00179/29015/

Éditeur(s) : Wiley / Blackwell
Résumé : P>New seismic reflection data from the Grand Banks of Newfoundland and the Newfoundland Basin add to the growing knowledge of the composition, structure and history of this non-volcanic margin. Geophysical imaging is now approaching the extent of that done previously on the conjugate margin along Iberia, providing a valuable database for the development of rifting models. Two parallel profiles over the shelf platform image deep crustal fabric representing Precambrian or possibly Appalachian deformation as well as Mesozoic extension. Progressively more intense extension of continental crust is imaged oceanwards without the highly reflective detachments frequently seen on profiles off Galicia. A landward-dipping event 'L' is imaged sporadically and appears to be analogous to a similar event on the Iberian IAM9 profile. The transition zone is probably exposed serpentinized mantle as interpreted off the Iberian margin although there appears to be a difference in the character of ridge development and reflectivity. The distinctive 'U' reflection identified previously at the base of the Newfoundland Basin deep water sedimentary section and recently identified as one or more thin basalt sills is imaged on newly presented profiles that connect previously published profiles SCR3 and SCR2 showing that 'U' is highly regular and continuous except where interrupted by basement highs. 'U' is also seen to have a major impact on the ability to image underlying basement. A full transect beginning over completely unextended continental crust through to oceanic crust has provided a data set from which estimates of extension and the pre-rifting location of the present continental edge can be made. Two estimates were obtained; 85 km based on faulting and 120 km based on crustal thickness.
Geophysical Journal International (0956-540X) (Wiley / Blackwell), 2009-08 , Vol. 178 , N. 2 , P. 1004-1020

Droits : 2009 Wiley / Blackwell
http://archimer.ifremer.fr/doc/2009/publication-6919.pdf
DOI:10.1111/j.1365-246X.2009.04162.x
http://archimer.ifremer.fr/doc/00000/6919/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the geodynamic evolution of the Aegea-Anatolia region and discuss strain localisation there over geological times. From Late Eocene to Present, crustal deformation in the Aegean backarc has localised progressively during slab retreat. Extension started with the formation of the Rhodope Metamorphic Core Complex (Eocene) and migrated to the Cyclades and the northern Menderes massif (Oligocene and Miocene), accommodated by crustal-scale detachments and a first series of core complexes (MCCs). Extension then localised in Western Turkey, the Corinth Rift and the external Hellenic arc after Messinian times, while the North Anatolian Fault penetrated the Aegean Sea. Through time the direction and style of extension have not changed significantly except in terms of localisation. The contributions of progressive slab retreat and tearing, basal drag, extrusion tectonics and tectonic inheritance are discussed and we favour a model (1) where slab retreat is the main driving engine, (2) successive slab tearing episodes are the main causes of this stepwise strain localisation and (3) the inherited heterogeneity of the crust is a major factor for localising detachments. The continental crust has an inherited strong heterogeneity and crustal-scale contacts such as major thrust planes act as weak zones or as zones of contrast of resistance and viscosity that can localise later deformation. The dynamics of slabs at depth and the asthenospheric flow due to slab retreat also have influence strain localisation in the upper plate. Successive slab ruptures from the Middle Miocene to the Late Miocene have isolated a narrow stripe of lithosphere, still attached to the African lithosphere below Crete. The formation of the North Anatolian Fault is partly a consequence of this evolution. The extrusion of Anatolia and the Aegean extension are partly driven from below (asthenospheric flow) and from above (extrusion of a lid of rigid crust).
ISSN: 0040-1951

insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950/document
https://hal-insu.archives-ouvertes.fr/insu-00715950/file/Jolivet-Aegean_Tectonophysics-2012.pdf
DOI : 10.1016/j.tecto.2012.06.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study provides new Ar-40/Ar-39 geochronological constraints on the age of the Alpine tectonics in the Aspromonte Massif (southern part of the Calabrian-Peloritan belt). This massif exposes the upper units of the Calabride Complex which originated from the European continental margin. The Calabride Complex was incorporated in the Alpine orogenic wedge and then integrated into the Apennines and Maghrebides fold- and-thrust belts. Throughout the Calabride Complex there is evidence for a two stage tectonic history, which remains however rather poorly dated: Alpine nappe stacking is followed by extensional reworking along the former thrust contacts or along new detachment surfaces. Our new ages suggest that exhumation of the uppermost units, which accompanied nappe stacking, probably started at 45 Ma and that the deepest units were almost completely exhumed at 33 Ma. This kinematics probably corresponds to syn-orogenic extension while the end of exhumation is clearly related to the extensional tectonics dated at 28.6 Ma along detachment structures.;Our geochronological data reveal a very short lag time between accretional and extensional processes in this part of the Mediterranean Alpine orogenic belt. The direction of extension, when the units are restored to their initial position (i.e. before the opening of the Western Mediterranean basins and the bending of the arc) is NNE-SSW. Such a direction does not fit with the eastward slab-retreat model generally put forward to explain extension in the Western Mediterranean. In contrast, we provide evidence for roughly N-S middle Oligocene extension in the accretionary prism, not previously described in this part of the Mediterranean domain.
ISSN: 0024-4937

hal-00475649
https://hal.archives-ouvertes.fr/hal-00475649
DOI : 10.1016/j.lithos.2009.10.011

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The objective of the present work is to study the formation of the passive continental margins of the Central Segment of the South Atlantic, most particularly the Congo and Angola margins. We propose a combined approach, which integrates structural constraints based on geological cross-sections (based on seismic data) and global constraints based on plate kinematic reconstructions. The structural study is based on : i) MCS and refraction data collected during the ZaiAngo programme (a joint project conducted by Ifremer and Total) ; ii) proprietary, industrial seismic data (courtesy of Total) from the Angola margin and iii) on all available seismic lines from the Africa and Brazil conjugated margins, between Walvis Ridge and the Equatorial Fracture Zones. Based on theses data, three structural domains (continental, transitional and oceanic) have been defined, the major characteristics of which are : Crustal thinning occurs abruptly, mostly below the continental slope, over a lateral distance of less than 50 km. The top of the crust deepens as the Moho shallows. Only a few extensional structures are observed ; tilted blocks are very few (one or two, depending on the profile), found only on the upper part of the slope and sealed by a discordance prior to salt deposition. The transitional domain is characterized by the existence of a pre-salt basin lying over a thin crustal layer. No tilted blocks are observed in this domain and reflectors within the pre-salt sediment series are parallel to the base of the Aptian salt, over distances greater than 100 km, precluding the possibility of any significant deformation that would imply large horizontal motions. Two types of crust are observed in the transitional domain. "Type I" crust is found below the undeformed pre-salt sediment series located below the eastern part of the basin ; it is characterized by an upper layer of thickness greater than 5 km and a abnormal velocity layer (7.2 - 7.6 km/s), up to 6 km thick. "Type II" crust is less than 5 km thick and found below the salt compressive front that affects the western part of the basin. The salt cover is continuous (no erosion surface is observed), from the continental shelf to the western termination of the basin. Salt was not deposited in a confined environment (like in the Mediterranean), but in a shallow water, lagunal environment. This imposes the zero-level and constrains the paleo-bathymetry at the time of salt deposition, which dates the latest stage of margin formation. Understanding the formation of a margin cannot be approached without studying the homolog margin. Therefore, it is of major importance to reconstruct the closure of the ocean bordered by these homolog margins and take into account the constraints imposed by the kinematic reconstructions on the lateral motions of the lithospheric plates. In order to assess the relative position of the plates at the ocean closure (prior to crustal thinning), a global study was thus performed, integrating all geophysical and geological constraints, in the ocean and on land. The role of african intra-plate deformation and its limits and their consequences have been thoroughly studied. To juxtapose the margins of the central segment of the Southern Atlantic, it is all the margins bordering the Equatorial Atlantic that need to be adjuste precisely. The kinematic study of this last region shows that the reconstruction obtained are reliable, unambiguous with a quantifiable precision The best fitting poles (obtained using the PLACA software), show that it is impossible to close the margins beyond the superposition of the salt fronts, from the Angola and Brazil margins. The geological cross-sections based on seismic data from the homolog margins indicate that a 330 km wide basin with thin (< 12 km) crust was present at the time of the fit. This basin cannot result from horizontal movement related to pure stretching or simple shear, or any model implying conservative volume. This conclusion is consistent with the existence of presalt reflectors parallel to the salt layer wich extends to the platform: the formation of the pre-salt basin must be related to vertical motions. The scenario that we propose for the evolution of the Congo-Angola margin consist in four stages: the first phase corresponds to extensional deformation limited to the few tilted blocks observed on the upper part of the slope. During the second phase, the main crustal thinning occurs, vertical motions prevailes, resulting in the formation of the continental slope and in the subsidence of the basin. The third phase corresponds to the first stress striction: deformation is concentrated in a limited section of the basin, which corresponds to the salt compression front. A proto-oceanic crust is formed, probably composed of thinned continental crust intruded by mantle material. The second stress striction corresponds to the finale phase, resulting in oceanisation senso stricto. The evolution described shows that we can not apply conservative models for margin formation (such as McKenzie and Wernicke or any of their avatars). In order to explain this thinning, one should investigate non-conservative models (implying geochemical transformation, small scale convection, intrusion...) such as those proposed in marginal or continental basins with no horizontal movments.
Ce travail de thèse aborde la formation des marges continentales passives dans le segment central de l'océan Atlantique Sud (plus particulièrement au Congo et en Angola), en intégrant une étude en coupe (étude structurale à partir des coupes sismiques) et une étude en plan (étude cinématique). L'étude structurale de la marge a été réalisée à partir des données de sismique réflexion et réfraction de la campagne Zaïango et d'une compilation de données sismiques réflexion existantes sur toutes les marges africaine et brésilienne entre les zones de fracture équatoriales et la ride de Walvis. L'interprétation de ces données a permis d'individualiser la structure de la marge en trois domaines : continental, transitionnel et océanique et de déterminer quelques points majeurs sur la structuration de la marge. L'amincissement est abrupt, localisé dans la zone de pente continentale et restreint à 50 km. La marge montre peu de structures distensives : seuls un ou deux blocs basculés sont observés en haut de pente continentale. Le domaine transitionnel est caractérisé par la géométrie particulière de la sédimentation anté-salifère, l'absence de blocs basculés et la faible épaisseur de croûte. La couche sédimentaire anté-salifère montre des réflecteurs plans jusqu'à la base du sel, continus sur 100 km, éliminant toutes possibilités de déformation du socle pendant et après son dépôt. La croûte du domaine transitionnel peut-être divisée en deux types : une croûte de type I sur laquelle se déposent les sédiments non déformés, et une croûte de type II sur laquelle se superposent les limites du « front compressif salifère » bien exprimé dans les séries postsalifères. Enfin le sel, que l'on observe depuis la plate-forme jusqu'au bassin profond, ne se dépose pas dans un bassin confiné (comme en Méditerranée) mais à un niveau proche de 0 m (ressemblant probablement à un dépôt de type lagunaire) et donne la paléo-bathymétrie au moment de son dépôt qui marque la fin de la période de formation de la marge. La compréhension de la genèse d'une marge ne peut être approchée sans son homologue. Cette simple constatation, cette évidence, montre toute l'importance que l'on doit apporter à la reconstruction cinématique initiale de l'océan qui borde ces marges homologues et aux contraintes imposées par les reconstructions cinématiques sur les mouvements horizontaux des plaques lithosphériques. Afin d'étudier la position des marges au moment de cette fermeture, c'est-à-dire avant amincissement, une étude globale intégrant l'ensemble des données disponibles, géophysiques et géologiques, océaniques et continentales, a été réalisée. Le rôle de la déformation intraplaque africaine, ses limites et leurs conséquences a, en particulier, été l'objet d'une attention poussée. Pour juxtaposer les marges du segment central, ce sont toutes les marges de l'océan Atlantique Equatorial qui doivent être ajustées précisément. L'étude cinématique réalisée de la région équatoriale montre que l'on obtient une reconstruction fiable et sans ambiguïté, avec une précision que l'on peut quantifier. Les pôles issus de cette étude (et calculés avec le Logiciel PLACA) indiquent qu'il est impossible d'obtenir une fermeture plus serrée que celle qui conduit à la superposition des fronts salifères brésilien et angolais : les coupes issues de la sismique réflexion des deux marges indiquent qu'il subsiste un bassin aminci, large de plus de 330 km et dont la croûte n'excède jamais 13 kilomètres d'épaisseur. La formation de ce bassin ne peut résulter de mouvements horizontaux, ce qui exclut un amincissement par étirement (pure stretching) ou par l'existence d'une faille de détachement (simple shear) ou par quelque modèle conservatif que ce soit. Cette constatation corrobore l'observation de la présence d'horizons anté-salifère parallèles, entre eux et au sel, couche salifère que l'on retrouve sur la plate-forme : la création de ce bassin anté-salifère ne peut être que liée à un mouvement vertical. Le schéma d'évolution que nous proposons à partir des données structurales et des contraintes cinématiques présente quatre étapes : le premier stade correspond à une phase de déformation distensive limitée aux quelques rares blocs basculés observés en haut de pente continentale. C'est durant la deuxième étape que se déroule la phase d'amincissement principal, les mouvements verticaux prévalent, aboutissant à la formation de la pente continentale et à la subsidence du bassin. La troisième phase correspond à une première striction des contraintes : la déformation se concentre sur une partie réduite du bassin, coïncidant avec le front salifère compressif. Une proto-croûte océanique se forme, probablement composée de croûte continentale amincie et intrudée de matériel mantellique. La seconde striction correspond à la phase finale de formation de la marge et aboutit à l'océanisation sensu stricto. L'étude cinématique et la description de l'évolution de la marge à partir des données sismiques montre donc que l'on ne peut envisager l'application d'un modèle de genèse des marges avec conservation de volume (type McKenzie ou Wernicke et leurs avatars) : pour expliquer l'amincissement du bassin, il faudrait probablement nous intéresser aux modèles non-conservatifs (impliquant transformation, convection à petite échelle, ...) qui sont déjà invoqués pour la formation des bassins marginaux ou continentaux, sans mouvements horizontaux.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2003/these-82.pdf
http://archimer.ifremer.fr/doc/00000/82/

Éditeur(s) : Neidine Editeurs
Résumé : This article replaces the French program of legal extension of the continental shelf named EXTRAPLAC, interesting in particular the 3 overseas collectivities of the Pacific (New Caledonia, Wallis and Futuna and French Polynesia)” It considers this program in the context of the Convention of the United Nations on the Maritime law. It clarifies the governance system of this program set up by the authorities of the State. A specific chapter clarifies the constraints to be respected to build up the necessary file in respect of the international Committee requirements so said UNO Commission of the Limits of the Continental shelf. The article considers then scenarios presented by 3 territories and state of progress of the three cases, both regarding the acquisition of the useful data and the planning of adequate oceanographic campaigns and structuring the administrative files in front of the UNO in conjunction with the border countries. The article ends finally on the potential extensions, the exploitation rights of mineral and living resources as the obligations which it supposes
Cet article replace le programme français d’extension juridique du plateau continental nommé EXTRAPLAC, intéressant notamment les 3 collectivités d’Outre-Mer du Pacifique (Nouvelle-Calédonie, Wallis et Futuna et Polynésie française) dans le contexte de la Convention des Nations Unies sur le Droit de la Mer. Il explicite le système de gouvernance de ce programme mis en place par les autorités de l’Etat. Un chapitre spécifique explicite les contraintes à respecter pour construire un dossier de demande présentable devant la Commission internationale spécialisée de l’ONU dite Commission des Limites du Plateau Continental. L’article considère ensuite les cas de figures présentés par les 3 territoires et l’état d’avancement des dossiers tant en matière d’acquisition des données utiles et de planification de campagnes océanographiques adéquates que de structuration et de dépôt administratif devant l’ONU en conjonction avec les pays frontaliers. L’article conclue enfin sur les extensions potentielles, les droits d’exploitation de ressources qui peuvent en être tirés comme les obligations que cela suppose.
Taï Kona (2269-7535) (Neidine Editeurs), 2014 , N. 11 , P. 18 - 26

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00217/32820/31254.pdf
http://archimer.ifremer.fr/doc/00217/32820/

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
In Eastern China, the North China Block (NCB) has experienced a complex tectonic evolution during Late Palaeozoic to Mesozoic times. The unconformable sedimentary cover, which ranges in age from Neoproterozoic to Permian, underwent two tectonic episodes in Early Triassic and Cretaceous times. An early north–south compressional phase, D1, characterized by north-verging recumbent folds with east–west-trending axes and top-to-the-north ductile shear zones can be observed in a gabbroic pluton and the Neoproterozoic sedimentary host rocks. The available radiometric ages allow us to interpret this event as an Early Triassic back-thrusting related to the final stage of the collision between the North China and South China Blocks. During the LateMesozoic, an extensional event characterized by (1) half-grabens filled by continental terrigeneous red beds and lava flows, (2) low-angle detachment faults, (3) synkinematic granitic plutons, and (4) metamorphic core complexes is widespread in the Eastern Liaoning Peninsula. This extensional D2 event can be subdivided into a ductile deformation and a brittle deformation, corresponding to different expressions of crustal deformation. In every area studied in the Eastern Liaoning Peninsula, the ductile D2 deformation is characterized by a NW–SE-trending stretching lineation with a top-to-the-NWsense of shear.Mica and amphibole fromthe metamorphic country rocks, granodioritic or monzogranitic plutons and their mylonitized margins yield 40Ar/39Ar ages ranging from 130 to 120 Ma. These dates support fast cooling and exhumation rates coeval with the extensional tectonics. The brittle D2 deformation is responsible for the formation of high-angle normal faults marked by low-temperature cataclasites bounding half-grabens. During the Mesozoic, the tectonic regime of Eastern China experienced a significant inversion from compression to extension. The Eastern Liaoning Peninsula massif provides an example of this geodynamic transition.
ISSN: 2041-4927

hal-00134055
https://hal-insu.archives-ouvertes.fr/hal-00134055
DOI : 10.1144/SP280.7

Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analogue and numerical models have shown that the strength of the lithospheric mantle controls the mode of lithosphere deformation. In extension, the presence or absence of a high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysical data question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling to quantify the impact of a ductile localizing mantle - instead of brittle - in triggering continental rifting. As a novelty, the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction, which may promote a significant strength drop and subsequent strain localization at low mantle temperature (< 700-800 °C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting that mainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. A medium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding to narrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductile localizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at large strain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting, although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geological and mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustal faulting that are commonly observed in nature.
ISSN: 0040-1951

Droits : info:eu-repo/semantics/OpenAccess
insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254/document
https://hal-insu.archives-ouvertes.fr/insu-00924254/file/Gueydan_precigout_2014_Tectonophysics.pdf
DOI : 10.1016/j.tecto.2013.11.029

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : International audience
The seaward extension of onshore formations and structures were previously almost unknown in Provence. The interpretation of 2D high-resolution marine seismic profiles together with the integration of sea-bottom rock samples provides new insights into the stratigraphic, structural and paleogeographic framework of pre-Messinian Salinity Crisis (MSC) deposits of the Provence continental shelf. Seven post-Jurassic seismic units have been identified on seismic profiles, mapped throughout the offshore Provence area and correlated with the onshore series. The studied marine surface and sub-surface database provided new insights into the mid and late Cretaceous paleogeography and structural framework as well as into the syn-and post-rift deformation in Provence. Thick (up to 2000 m) Aptian-Albian series whose deposition is controlled by E-W-trending faults are evidenced offshore. The occurrence and location of the Upper Cretaceous South-Provence basin is confirmed by the thick (up to 1500 m) basinal series downlaping the Aptian-Albian unit. This basin was fed in terrigenous sediments by a southern massif (" Massif Méridional ") whose present-day relict is the Paleozoic basement and its sedimentary cover from the Sicié imbricate. In the bay of Marseille, thick syn-rift (Rupelian to Aquitanian) deposition occurred (>1000 m). During the rifting phase, syn-sedimentary deformations consist of dominant N040 to N060 sub-vertical faults with a normal component and N050 drag-synclines and anticlines. The syn-rift and early post-rift units (Rupelian to early Burdigalian) are deformed and form a set of E-W-trending en echelon folds that may result from sinistral strike-slip reactivation of N040 to N060 normal faults during a N-S com-pressive phase of early-to-mid Burdigalian age (18-20 Ma). Finally, minor fault reactivation and local folding affect post-rift deposits within a N160-trending corridor localized south of La Couronne, and could result from a later, post-Burdigalian and pre-Pliocene compressive phase.
Cadre tectonostratigraphique des formations anté-pliocènes du plateau continental de Provence (golfe du Lion oriental, SE France) Mots-clés. – Géologie marine, Tectonostratigraphie, Stratigraphie sismique, Paléogéographie crétacée, Rifting oligo-miocène, Compression post-rift Résumé. – Le prolongement en mer des formations et des structures provençales était jusqu'alors largement inconnu.L'interprétation de profils de sismique-réflexion marine 2D et l'intégration de dragages et carottages du fond-marin ont permis d'apporter des éléments nouveaux concernant le cadre stratigraphique, structural et paléogéographique des dé-pôts anté-Messiniens du plateau continental de Provence. Sept unités sismiques post-jurassiques ont été identifiées sur les profils sismiques, cartographiées à travers le plateau continental et corrélées avec les séries affleurant à terre. Une épaisse unité apto-albienne (jusqu'à 2000 m) dont le dépôt est contrôlé par des failles E-W a été mise en évidence en mer. L'existence d'un bassin subsident au Crétacé supérieur sur le plateau continental de Provence a été confirmée par le développement d'une épaisse série de bassin (jusqu'à 1500 m) reposant en downlap sur l'Apto-Albien. Le socle mé-tamorphique de l'écaille de Sicié et sa couverture sédimentaire peut être considéré comme une relique allochtone du « Massif Méridional » ayant alimenté le Bassin sud-provençal en éléments terrigènes au Crétacé supérieur. Dans la rade de Marseille, une épaisse unité syn-rift (Rupélien à Aquitanien) a été mise en évidence (>1000 m), structurée en une série de synformes en échelon d'axe E-W et affectée par des failles d'orientation dominante N040 à N060. Sur le flanc sud des synformes, la formation de plis d'axe N050 est associée à une déformation syn-sédimentaire. La formation des synformes en échelon d'axe E-W résulterait d'une réactivation en décrochement des failles N040 à N060 pendant une phase de compression N-S dont l'âge est compris entre le Burdigalien inférieur et moyen (18-20 Ma). Enfin, les dépôts post-rift sont affectés par des déformations mineures (réactivation de failles et plis associés), le long d'un couloir d'orientation N160 à l'ouest de la baie de Marseille, attribuables à une phase de compression post-burdigalienne et anté-pliocène.
ISSN: 0037-9409

hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727/document
https://hal-amu.archives-ouvertes.fr/hal-01463727/file/Fournier_et_al_Provence_2016.pdf
DOI : 10.2113/gssgfbull.187.4-5.187

Éditeur(s) : HAL CCSD
Résumé : To understand the effect of inherited lithospheric structures on the continental plates deformation process, we have developed a multi scale model that explicitly takes into account an anisotropic viscosity due to the Crystal Preferred Orientation (CPO) of olivine in the mantle by coupling a viscoplastic self-consistent simulation of the deformation at the polycrystalline aggregate to a 3D Finite Element code. Using this tool, we calculate the mechanical behavior of a continental lithosphere submitted to extension for various initial structures. The first set of experiments investigates the deformation of a plate with a homogeneous initial olivine CPO. Results show that the macroscopic anisotropy is strongly dependent on the initial orientation of the olivine CPO relative to the solicitation and to its evolution. The second set of experiments aims to analyze the deformation of a continental plate containing pre-existing lithospheric scale shear zones. These multi-domain models show that the olivine mechanical anisotropy may induce the reactivation of pre-existing lithospheric scale shear zones in a plate submitted to rifting. In both cases, the results shows that the macroscopic mechanic anisotropy induced by the evolution of olivine CPO in the upper mantle is a key parameter to understand the deformation of the continental plates and to explain the observed reactivation of inherited structure from past tectonics events
Afin de comprendre l'effet des structures préexistantes sur la déformation des plaques continentales, nous avons développé une méthode de modélisation mécanique multi-échelle utilisant une viscosité anisotrope induite par les Orientations Préférentielles du Réseau (OPR) des cristaux d'olivine présents dans le manteau. Cette méthode en couple le calcul viscoplastique autocohérent de la déformation d'un agrégat d'olivine à un code éléments finis 3D. Elle a été utilisée pour le calcul du comportement mécanique d'une plaque continentale soumise à une extension. Une première série d'expériences numériques sur l'extension de plaque lithosphérique présentant des OPR initiales d'olivine homogènes a permis de montrer que l'anisotropie mécanique macroscopique est fortement dépendante de l'orientation initiale de l'OPR. La seconde série de simulations analyse l'extension d'une plaque continentale présentant une zone présentant des OPR d'olivine héritées d'un événement tectonique précédant. Les résultats de ces calculs multi-domaines que l'anisotropie mécanique de l'olivine peut expliquer la réactivation des zones de cisaillement héritées lors du rifting. Les résultats obtenus dans les deux séries de modèles montrent que l'anisotropie mécanique macroscopique induite par l'évolution des OPR d'olivine dans le manteau supérieur est un paramètre clé pour la compréhension de la déformation des plaques continentales et pour expliquer la réactivation observée de structures tectoniques, tels que les grands décrochements, lors des épisodes tectoniques ultérieurs.
https://tel.archives-ouvertes.fr/tel-00369463

tel-00369463
https://tel.archives-ouvertes.fr/tel-00369463
https://tel.archives-ouvertes.fr/tel-00369463/document
https://tel.archives-ouvertes.fr/tel-00369463/file/KnollThese09.pdf

Éditeur(s) : HAL CCSD
Résumé : Based on fieldwork and modern analytical technics, this work presents an overview of the Mid-Cretaceous hyper-extended rift system exposed in the northern part of the Pyrenean mountain range. Its inversion during the Pyrenean orogeny allows for precious observations of the deep-seated processes occurring at the foot of distal margins. Some peculiar aspects characterizing the pre-Alpine hyper-extended domain are examined throughout the 400km long suture that is fossilized in the North Pyrenean Zone (NPZ). The High Temperature/Low Pressure (HT/LP) thermal imprint of the extensional event is studied thanks to a dataset of more than hundred peak temperature measurement by Raman spectroscopy of the carbonaceous material (RSCM). The pre- and syn-rift metasediments are characterized by an intense ductile deformation. Field and EBSD investigations of the mechanisms of deformation reveal ductile and syn-metamorphic processes. The emplacement conditions of the peridotite into crustal levels and localized exhumation is examined in the key-localities of Urdach, Saraillé-Tos de la Coustette, Moncaup, Lherz, Caussou-Bestiac and Salvezines, The results indicate an early boudinage of the crust during the rifting process, resulting in the direct superposition of pre-rift sediments on top of mantle peridotites. Field, textural and isotopic characterization of the various ophicalcite and breccias found in the vicinity of the peridotite outcrops allow to decipher their exhumation history. New Ar-Ar geochronological results allow to precise the temporal evolution of the NPZ.
Cette thèse présente une analyse structurale et thermique des marges passives crétacées inversées dans la Zone Nord Pyrénéenne (ZNP). L'application du paléothermomètre RSCM (spectrométrie Raman de la matière carbonée) sur plus de cent échantillons répartis à travers la ZNP permet de préciser l'évolution thermique de la déchirure continentale. Un métamorphisme de haute température (450 à >600°C) se développe particulièrement au droit de zones ou la croûte continentale est extrêmement amincie voire éliminée. Les sédiments pré- et syn-rift sont marqués par une intense déformation ductile. L'analyse à l'EBSD des fabriques minérales indique une déformation de Haute-température contemporaine du métamorphisme HT-BP. Les conditions de mise en place crustale des péridotites et leur exhumation localisée sont examinées dans les localités d'Urdach, Saraillé-Tos de la Coustette, Moncaup, Lherz, Caussou-Bestiac et Salvezines. Les résultats indiquent un boudinage de la croûte continentale au cours du processus de rifting. Des décollements de couverture, principalement localisés dans les évaporites triasiques conduisent à la superposition directe des sédiments pré-rift sur le manteau exhumé. La notion nouvelle de soutirage crustal est introduite pour désigner ce processus dans lequel l'écoulement gravitaire ne joue pas un rôle principal. La caractérisation sédimentologique, pétrographique et isotopique (O et C) des différentes formations de brèches et ophicalcites observées à proximité des corps de péridotites permet de reconstituer les étapes de l'exhumation du manteau en pied de marge. Enfin de nouvelles datations permettent de mieux contraindre le calendrier des évènements successifs.
https://tel.archives-ouvertes.fr/tel-00787952

tel-00787952
https://tel.archives-ouvertes.fr/tel-00787952
https://tel.archives-ouvertes.fr/tel-00787952/document
https://tel.archives-ouvertes.fr/tel-00787952/file/TheI_se-Clerc-2012.pdf

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mediterranean geodynamic system is an exceptional natural laboratory to study the complexities of back-arc extension during subduction rollback. Corsica is a key locality that recorded the Alpine subduction-collision history followed by 30 Ma of the Apennines slab rollback, responsible for the successive opening, from West to East, of the Liguro-Provençal basin and the Tyrrhenian Sea. The overall strain pattern of the Alpine metamorphic units of Alpine Corsica is studied through a synthesis of i) available geological maps, ii) geochronological data and iii) newly acquired structural data relative to successive events of ductile and brittle extension, Three main stages of extension are recorded: 1/ Syn-metamorphic Oligocene extension accommodated by N140° trending ductile shear zones, that correspond to the reactivation of a major Alpine thrust; 2/ Burdigalian ramp-flat extension with N60°-70° trending fault zones that controlled the deposition of onshore piggy-back basins (e.g. St Florent basin), and 3/ Serravalian N-S trending fault zones. From a geodynamical point of view, these successive extensional deformations in Alpine Corsica can be correlated to the history of the Apennines slab rollback. The two first stages are related to a southeastward rollback of the Appennines slab that successively triggered: 1/ Continental rifting in Oligocene leading to the opening of the Liguro-Provençal basin and 2/ Burdigalian extension with N60°-70° trending fault zone, oblique to the Alpine thrust that, after a counterclockwise rotation of the Corso-Sardinian block, became unable to accommodate extension. Finally, the third stage that gave NS-trending fault zones developed in Serravalian, at the onset of Tyrrhenian rifting, related to an eastward rollback of the Apennines slab, as a response of slab tearing in Sicily.
ISSN: 0040-1951

insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859/document
https://hal-insu.archives-ouvertes.fr/insu-01424859/file/gueydan-tectonoph-2017.pdf
DOI : 10.1016/j.tecto.2016.12.028