Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We explore the use of seismic noise produced by rivers to monitor the bed load transport in the case of a low-discharge braided river in the French Alps: the "torrent de St Pierre". For this purpose, we deployed two dedicated seismic networks during summers 2007 and 2008, for which the characteristics of the recorded continuous signal are similar despite changes in the sensor locations. For dry weather conditions, only melting of nearby glaciers controls the supply of water to the stream. In these conditions, the river hydrology and the seismic energy in the 2-80 Hz frequency band both follow a diurnal fluctuation similar to the thermal amplitude. In contrast during rainfall episodes, the temperature variation fails to explain the hydrodynamic changes. Dense cloud covers reduce glacier melting and the recorded seismic energy denotes bursts of high-frequency seismic noise well correlated with water level data. Comparisons between the recorded seismic signals and the collected hydrological and sediment load data indicate that a frequency band of 3-9 Hz best explains the water level changes and thus the seismic waves coming from the flow turbulence. These analyses also reveal the presence of a seismic noise threshold that might be linked to the water shear stress exerted by the flowing water. Using the seismic energy in this frequency band as a proxy of the fluvial shear stress, the seismic-hydrologic relationship may be sensitive to variations in bed load transport. The spectral content of the seismic energy shows patterns consistent with the mobilization of sediment particles. From the interpretations of the seismic wave attenuation of river sources, we finally propose that stations at a distance from the stream less than 50 m are able to record most sediment particles. Farther stations are still useful during extreme events when largest grain sizes are mobilized. More generally this study demonstrates the feasibility of using the river seismic signal to survey bed load transport in various river types from small braided mountain rivers like the "torrent de St Pierre" to the large entrenched Himalayan rivers.
ISSN: 0022-1694

hal-00644789
https://hal.archives-ouvertes.fr/hal-00644789
DOI : 10.1016/j.jhydrol.2011.07.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
B-type olivine fabrics are pervasive within highly depleted dunites of the small-sized Imono peridotite body located within the subduction-type Sanbagawa metamorphic belt of the southwest Japan arc. The dunites contain various microstructures, ranging from porphyroclastic to fine-grained intensely sheared textures. The Mg/(Mg+Fe) atomic ratios (Fo number) of olivine within these dunites are consistently around 0.9, as are the Cr/(Cr+Al) atomic ratios (Cr number) of chromian spinel, suggesting their evolution from a highly depleted magma (boninite). These data provide strong thermal constraints on the formation of the highly depleted dunites,as their formation requires hot, hydrous, shallow mantle (> 1250 degrees C at < 30 km depth) in the mantle wedge. Because the Sanbagawa metamorphic belt finally entrained these peridotites during progressive retrogression, B-type olivine fabrics probably developed in the fore-arc side of the subduction zone, above or along the subducting slab, possibly in association with dehydration fluids derived from the slab. The previously documented small magnitude of S-wave splitting can be explained by the seismic properties of B-type peridotites within an anisotropic layer of approximately several kilometers in thickness, oriented by flow parallel to the subducting slab, under maximum temperatures of 880-1030 degrees C depending on the flow stress. These findings indicate that such a B-type layer could constitute a dominant source of seismic S- and P-wave anisotropy in mantle wedge regions. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00412594
https://hal.archives-ouvertes.fr/hal-00412594
DOI : 10.1016/j.epsl.2008.06.014

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Integrated Ocean Drilling Program Expedition 313 continuously cored uppermost Eocene to Miocene sequences on the New Jersey shallow shelf (Sites M27, M28, and M29). Previously, 15 Miocene (ca. 23-13 Ma) seismic sequence boundaries were recognized on several generations of multichannel seismic profi les using criteria of onlap, downlap, erosional truncation, and toplap. We independently recognize sequence boundaries in the cores and logs based on an integrated study of core surfaces, lithostratigraphy and process sedimentology (grain size, mineralogy, facies, and paleoenvironments), facies successions, stacking patterns, benthic foraminiferal water depths, downhole logs, core gamma logs, and chronostratigraphic ages. We use a velocitydepth function to predict the depths of seismic sequence boundaries that were tested by comparison with major core surfaces, downhole and core logs, and synthetic seismograms. Using sonic velocity (core and downhole), core density, and synthetic seismograms, we show that sequence boundaries correspond with acoustic impedance contrasts, although other stratal surfaces (e.g., maximum fl ooding and transgressive surfaces) also produce refl ections. Core data are suffi cient to link seismic sequence boundaries to impedance contrasts in 9 of 12 instances at Site M27, 6 of 11 instances at Site M28, and 8 of 14 instances at Site M29. Oligocene sequences have minimal lithologic and seismic expression due to deep-water locations on clinoform bottomsets. Miocene sequences (ca. 23-13 Ma) were sampled across several unconformity clinothems (prograding units) on topset, foreset, and bottomset locations. Excellent recovery allows core-seismic integration that confi rms the hypothesis that unconformities are a primary source of impedance contrasts. Our core-seismic-log correlations predict that key seismic surfaces observed in other sub surface investigations without core and/or well logs are stratal surfaces with sequence stratigraphic signifi cance.
EISSN: 1553-040X

insu-00946235
https://hal-insu.archives-ouvertes.fr/insu-00946235
DOI : 10.1130/GES00858.1

Éditeur(s) : HAL CCSD
Résumé : East African Rift (EAR) is the divergent plate boundary. EAR exposes different stages of extension, from early stage rifting in Tanzania to oceanic accretion in Afar (Ethiopia). Manyara basin is the southernmost rift system of the east branch of EAR with recent volcanism (< 1.5 Ma) and a seismic swarm in the lower crust (20 – 40 km). Due to its location and tectonic setting, the Manyara basin offers the opportunity to study the earliest stage of rift initiation. Manyara volcanism is composed of several types of hyper-alkaline lavas as Mg-nephelinites (Mg# > 55) (Labait, Kwaraha), calciocarbonatite (Kwaraha) and evolved nephelinites (Mg# < 35) (Hanang).Mg-nephelinites (Labait and Kwaraha) are primary lavas mainly composed of olivine and clinopyroxene (cpx). Geochemical modelling from trace elements suggests that these primary magmas result from a degree of partial melting < 1 % from a CO2-garnet-phlogopite-bearing peridotite. These magmas have an asthenospheric source at depth > 120 km (lava carries xenoliths with equilibrium conditions > 4 GPa). The minerals were crystallized from a magma with a low H2O content (0.1 and 0.5 wt% H2O). The calciocarbonatite and evolved nephelinites are derived from Mg-nephelinites by fractional crystallization and immiscibility processes. Hanang nephelinites are silica- and alkaline-rich lavas (44.2 – 46.7 wt % SiO2, 9.5 –12.1 wt % Na2O+K2O, respectively) composed by cpx, Ti-garnet, nepheline, apatite and titanite. Complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites record magmatic differentiation involving open system with carbonate-silicate immiscibility and primary melt replenishment. The low H2O content of cpx (3 – 25 ppm wt. H2O) indicates that at least 0.3 wt % H2O was present at depth during carbonate-rich nephelinite crystallization at 340 – 640 MPa and 1050 – 1100 °C. The study of hosted-nepheline melt inclusions from Hanang allows constraining the late magmatic evolution of nephelinites during storage and magma ascent. Melt inclusions are composed by a silicate trachytic glass, a carbonate phase and a shrinkage bubble. Trachytic glass contains high content in CO2 (0.43 wt %, SIMS analyses), sulfur (0.21 – 0.92 wt % S), chlorine (0.28 –0.84 wt % Cl) and H2O low content (< 0.1 wt %, Raman analyses). Immiscibility process leading to the formation of carbonate occurs in a closed system during rapid magma ascent between 200 – 500 MPa. The carbonate phase is a Ca-Na-K-S-rich and anhydrous carbonate (33 wt % CaO, 20 wt % Na2O, 3 wt % K2O, and 3 wt % S). The pre-immiscible liquid has a phonolitic composition with 6 ± 1.5 wt % CO2 at 700 MPa. A preliminary study of melt inclusions by XANES spectroscopy and whole rocks by Mössbauer spectroscopy was used to determine these Manyara lavas were formed at oxidizing conditions (~ ΔFMQ +1.5).The early stage rifting volcanism (Manyara Basin) is characterized by CO2-rich and H2O-poor magmas from at least 120 km below the rift escarpment. The presence of CO2-rich magmas and the small amount of volcanic rocks erupted at the surface may indicate that the storage and percolation of these magmas at depth is a potential trigger for deep seismic swarms.
Le rift Est africain (REA) est une frontière de plaque en extension. Ce rift présente plusieurs stades d’extension, de l’initiation du rift en Tanzanie jusqu’à l’accrétion océanique en Afar. Le bassin de Manyara se situe le plus au sud de branche Est du REA. Il est caractérisé par la présence de volcanisme récent (< 1,5 Ma) et d’un essaim sismique dans la croûte inférieure (20 – 40 km). De par sa localisation et son contexte tectonique, le bassin de Manyara offre l’opportunité d’étudier le stade le plus précoce de l’initiation du rift. Le bassin de Manyara est composé de plusieurs types de laves hyperalcalines, les néphélinites magnésiennes (Mg# > 55) (Labait, Kwaraha), de calciocarbonatite (Kwaraha) et des néphélinites différenciées (Mg# < 35) (Hanang).Les néphélinites magnésiennes (Labait et Kwaraha) sont des laves primaires composées d’olivines et de clinopyroxènes (cpx). La modélisation géochimique des éléments en trace suggère que ces magmas primaires résultent d'un degré de fusion partielle ≤ 1 % à partir d'une péridotite à grenat et phlogopite. Ces magmas proviennent d’une profondeur > 120 km (présence de xénolites avec des conditions d’équilibre > 4 GPa). Les minéraux ont cristallisés à partir d’un magma pauvre en eau (0,1 et 0,5 pds % H2O). La calciocarbonatite et les néphélinites différenciés sont issues des néphélinites magnésiennes par cristallisation fractionnée et processus d’immiscibilité. Les néphélinites du Hanang sont riches en éléments alcalins (9,5 – 12,1 pds % Na2O+K2O) et en silice (44,2 – 46,7 pds% SiO2) et sont composés de cpx, grenat, néphéline, titanite et apatite. La zonation complexe dans les cpx (par exemple, changement brusque de Mg#, Nb/Ta, et H2O) implique une différenciation magmatique en système ouvert avec immiscibilité de liquide carbonaté et silicaté ainsi qu’un remplissage de la chambre magmatique avec des liquides primaires. La faible teneur en eau des cpx (3 – 25 ppm H2O) indique la présence d’un magma pauvre en eau (0,3 pds % H2O) lors de la cristallisation des cpx à des conditions crustales (340 – 640 MPa et 1050 – 1100 °C). L’étude des inclusions vitreuses dans les néphélines de Hanang permet de contraindre l'évolution magmatique tardive des néphélinites et le comportement des éléments volatils (CO2, H2O, S, F, Cl) lors du stockage et de la remontée du magma. Les inclusions vitreuses sont composées d’un verre trachytique, d’une phase carbonatée et d’une bulle de rétraction. Le verre trachytique contient du CO2 (0,43 pds % CO2, analyses SIMS), du soufre (0,21 à 0,92 pds% S), du chlore (0,28 – 0,84 pds % Cl) et très peu d’H2O (< 0,1 pds % H2O, analyses Raman). Le processus d’immiscibilité conduisant à la formation du carbonate se produit dans un système fermé pendant l'ascension rapide du magma, entre 200 – 500 MPa. La phase carbonatée est un carbonate anhydre et riche en Ca-Na-K-S (33 pds % CaO, 20 pds % Na2O, 3 pds % K2O, et 3 pds % S). Le liquide pré-immiscible a une composition phonolitique avec 6 ± 1,5 pds % CO2 à une pression de 700 MPa. Une étude préliminaire des inclusions par spectroscopie XANES et des roches par spectroscopie Mössbauer a permis de déterminer que les laves de Manyara se sont formées à conditions oxydantes (~ ∆FMQ +1,5).À l’initiation du rift, le volcanisme dans le bassin de Manyara est caractérisé par des magmas riches en CO2 et pauvres en H2O issus d’au moins 120 km de profondeur sous l'escarpement du rift. La présence de ces magmas riches en CO2 et la faible quantité de roches volcaniques émises à la surface peuvent indiquer que le piégeage et la percolation de ces magmas en profondeur est un déclencheur potentiel des essaims sismiques profonds.
https://tel.archives-ouvertes.fr/tel-01563231

NNT : 2016MONTT114
tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231v2/document
https://tel.archives-ouvertes.fr/tel-01563231/file/2016_BAUDOUIN_archivage.pdf

Éditeur(s) : Gauthier-villars
Résumé : Seismic, Seabeam, magnetic and gravimetrie surveys in the southern part of the N-Fiji basin were conducted during the SEAPSO LEG III Cruise. The active spreading axis was recognized between 17°30'S and 21°S. It consists of a continuous N-S Ridge cross-cut by transverse directions oriented N25 and N45. North of 17°30'S, the spreading System is more complex due to the existence of a possible triple junction located around 15° S. The eastern part of the N-Fiji basin, west of Viti Levu is mostly characterized by alternating highs and deeps (<4,000 m). This area must be regarded no more as a spreading center, but as complex boundary suffering transverse tectonics.
La mission SEAPSO III a permis de localiser une zone d'accrétion active, d'orientation méridienne et pratiquement continue entre 17°30'S et 21° S. Des accidents transverses, qui encadrent ou recoupent cette dorsale, s'orientent autour de deux directions principales N25 et N45. Au Nord de 17 30'S le système d'accrétion, beaucoup plus complexe, annonce la triple jonction reconnue aux alentours de 15" S. La partie orientale du bassin Nord-Fidjien (à l'Ouest de l'île de Viti Levu) est caractérisée par l'alternance de zones hautes et de dépressions dont certaines dépassent 4000 m de profondeur. Il s'agit d'une zone complexe de déformations liées à des accidents cisaillants transverses.
Comptes Rendus de l'Academie des Sciences Serie II (1251-8069) (Gauthier-villars), 1986-06 , Vol. 303 , N. 1 , P. 93-98

Droits : Académie des Sciences
http://archimer.ifremer.fr/doc/00184/29492/27835.pdf
http://archimer.ifremer.fr/doc/00184/29492/

Éditeur(s) : HAL CCSD Bureau de recherches géologiques et minières
Résumé : National audience
Les tremblements de Terre sont sans doute l’un des phénomènes les plus catastrophiques associés à la dynamique de notre planète. Leur occurrence peut être associée d’une part au chargement lent et progressif des failles dû au mouvement des plaques tectoniques, mais également à la proximité d’autres séismes qui peuvent localement provoquer une déstabilisation du milieu. Les séismes sont classiquement interprétés dans le cadre de la théorie du cycle sismique (Fig. 1). La période asismique, correspondant au chargement séculaire des contraintes sur le plan des failles, est appelée période inter-sismique. Sa durée, entre 50 et 1000 ans, dépend du contexte géodynamique et notamment de la vitesse de chargement. La phase co-sismique correspond au séisme, i.e. à la phase de nucléation et de propagation de la rupture sismique. La période de temps associée est extrêmement courte et varie suivant les séismes entre quelques secondes à plusieurs minutes pour les méga-tremblements de terre comme celui de Sumatra en 2004 ou plus récemment celui du Japon en 2011. Enfin, suite à la rupture sismique, on considère une phase post-sismique qui correspond à un réajustement mécanique rapide du milieu qui peut s’effectuer sur plusieurs semaines, mois ou même années. La courte échelle de temps des observations sismologiques ou géodésiques (<100 ans) par rapport à la durée d’un cycle sismique (plusieurs centaines d’années) est un facteur limitant. Ainsi, aucun cycle sismique complet n’a pour l’instant pu être documenté.
ISSN: 0292-8477

insu-00913121
https://hal-insu.archives-ouvertes.fr/insu-00913121
https://hal-insu.archives-ouvertes.fr/insu-00913121/document
https://hal-insu.archives-ouvertes.fr/insu-00913121/file/geochronique_cattinetal.pdf

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
Abstract The continuous record of large surface-rupturing earthquakes along the Dead Sea fault brings unprecedented insights for paleoseismic and archaeoseismic research. In most recent studies, paleoseismic trenching documents the late Holocene faulting activity, while tectonic geomorphology addresses the long-term behavior (>10 ka), with a tendency to smooth the effect of individual earthquake rupture events (Mw >7). Here, we combine historical, archaeological, and paleoseismic investigations to build a consolidated catalog of destructive surface-rupturing earthquakes for the last 14 ka along the left-lateral Jordan Valley fault segment. The 120- km-long fault segment limited to the north and the south by major pull-apart basins (the Hula and the Dead Sea, respectively) is mapped in detail and shows five subsegments with narrow stepovers (width < 3 km). We conducted quantitative geomorphology along the fault, measured more than 20 offset drainages, excavated four trenches at two sites, and investigated archaeological sites with seismic damage in the Jordan Valley. Our results in paleoseismic trenching with 28 radiocarbon datings and the archaeoseismology at Tell Saydiyeh, supplemented with a rich historical seismic record, document 12 surface-rupturing events along the fault segment with a mean interval of ∼1160 yr and an average 5 mm=yr slip rate for the last 25 ka. The most complete part of the catalog indicates recurrence intervals that vary from 280 yr to 1500 yr, with a median value of 790 yr, and suggests an episodic behavior for the Jordan Valley fault. Our study allows a better constraint of the seismic cycle and related short-term variations (late Holocene) versus long-term behavior (Holocene and late Pleistocene) of a major continental transform fault.
ISSN: 0037-1106

hal-00747401
https://hal.archives-ouvertes.fr/hal-00747401
DOI : 10.1785/0120100097

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Talc is a hydrous magnesium rich layered silicate that is widely disseminated in the Earth from the seafloor to over 100 km depth, in ultra-high pressure metamorphism of oceanic crust. In this paper we determine the single crystal elastic constants at pressures from 0 to 12 GPa of talc triclinic (C 1¯) and monoclinic (C2/c) polytypes using ab initio methods. We find that talc has an extraordinarily high elastic anisotropy at zero pressure that reduces with increasing pressure. The exceptional anisotropy is complemented by a negative Poisson's ratio for many directions in crystal space. Calculations show that talc is not only one of very few common minerals to exhibit auxetic behaviour, but the magnitude of this effect may be the largest reported so far for a mineral. The compression (Vp) and shear (Vs) wave velocity anisotropy is 80% and 85% for the triclinic polytype. At pressures where talc is known be stable in the Earth (up to 5 GPa) the Vp and Vs anisotropy is reduced to about 40% for both velocities, which is still a very high value. Vp is slow parallel to the c-axis and fast perpendicular to it. This remains unchanged with increasing pressure and is observed in both polytypes. The shear wave splitting (difference between fast and slow S-wave velocities) at low pressure has high values in the plane normal to the c-axis, with a maximum near the alow asterisk-axis in the triclinic and the b-axis in the monoclinic polytype. The c-axis is the direction of minimum splitting. The pattern of shear wave splitting does not change significantly with pressure. The volume fraction of talc varies between 11 and 41% for hydrated mantle rocks, but the lack of data on the crystallographic preferred orientation (CPO) precludes a detailed analysis of the impact of talc on seismic anisotropy in subduction zones. However, it is highly likely that CPO can easily develop in zones of deformation due to the platy habit of talc crystals. For random aggregates of talc, the isotropic Vp, Vs and Vp/Vs ratio have significantly lower values than those of antigorite and may explain low-velocity regions in the mantle wedge. Vp/Vs ratios are more complex in anisotropic media because there are fast and slow S-waves, resulting in Vp/Vs1 and Vp/Vs2 ratios for every propagation direction, making interpretation difficult in deformed polycrystalline talc with a CPO. Talc on the subduction plate boundary can strongly influence guided wave velocity as CPO would develop in this region of intense shearing. The very low coefficient of friction (< 0.1) of talc above 100 °C could also explain silent earthquakes at shallow depths (ca 30 km) along the subduction plate boundaries, frequently responsible for tsunami.
ISSN: 0012-821X

hal-00411481
https://hal.archives-ouvertes.fr/hal-00411481
DOI : 10.1016/j.epsl.2008.07.047

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Progress in seismic methodology and ambitious large-scale seismic projects are enabling high-resolution imaging of the continental crust. The ability to constrain interpretations of crustal seismic data is based on laboratory measurements on rock samples and calculations of seismic properties. Seismic velocity calculations and their directional dependence are based on the rock microfabric, which consists of mineral aggregate properties including crystallographic preferred orientation (CPO), grain shape and distribution, grain boundary distribution, and misorientation within grains. Single-mineral elastic constants and density are crucial for predicting seismic velocities, preferably at conditions that span the crust. However, high-temperature and high-pressure elastic constant data are not as common as those determined at standard temperature and pressure (STP; atmospheric conditions). Continental crust has a very diverse mineral composition; however, a select number of minerals appear to dominate seismic properties because of their high-volume fraction contribution. Calculations of microfabric-based seismic properties and anisotropy are performed with averaging methods that in their simplest form takes into account the CPO and modal mineral composition, and corresponding single crystal elastic constants. More complex methods can take into account other microstructural characteristics, including the grain shape and distribution of mineral grains and cracks and pores. Dynamic or active wave propagation schemes have recently been developed, which offer a complementary method to existing static averaging methods generally based on the use of the Christoffel equation. A challenge for the geophysics and rock physics communities is the separation of intrinsic factors affecting seismic anisotropy, due to properties of crystals within a rock and apparent sources due to extrinsic factors like cracks, fractures, and alteration. This is of particular importance when trying to deduce crustal composition and the state of deformation from seismic parameters.
ISSN: 8755-1209

Droits : info:eu-repo/semantics/OpenAccess
hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568/document
https://hal.archives-ouvertes.fr/hal-01685568/file/Almqvist_et_al-2017-Reviewssur Geophysics.pdf
DOI : 10.1002/2016RG000552

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To quantify the relationships between anisotropy. S-wave splitting and tectonics, we determined the seismic properties of lower-crustal and upper-mantle rocks outcropping in the lvrea Zone (Northem Italy). We obtained P-and S-wave seismic velocities by laboratory direct velocity measurements and/or by calculations based on the modal compositions of the rocks, the lattice preferred orientations (LPOs), and the single crystal stiffness coefficients. Measured P-and S-wave velocities (6.0-7 .5 km s-1 and 3.6-4.2 km s-1) are typical of the lower crust. The P-wave anisotropy is in the range 0-l 0%. Shear-wave birefringence is in the range 0.0-0.6 km s-1 , with typical values between 0.0 and 0.2 km s-1 • In many cases, the birefringence is clearly related to fabric elements (foliation, lineation). Mafic rocks such as anorthosite or pyroxene-bearing gabbros exhibit low P-wave anisotropies (< 5%) and low shear-wave birefringences (less than 0.1 km s-1). In contrast, the seismic properties of felsic rocks such as biotite-bearing gneisses and mafic rocks such as amphibolites display high V P anisotropy (10%) and strong birefringence (0.3 km s-1). Biotite and amphibole preferred orientations clearly control seismic anisotropy and particularly shear-wave splitting. In these rocks, maximum splitting is observed in directions parallel to the foliation with the fast split shear wave polarized parallel to the foliation plane. To have an overview of the seismic properties of this lower-crustal section at a broader scale, we calculated from our data the anisotropie seismic properties of several hypothetical samples that are perhaps more representative of the regional anisotropy than each sample individually. For instance, the average lower-crustal sample displays an anisotropy of 5.5% for P waves and a birefringence around 0.14 km s I for S waves propagating parallel to the foliation. We observe little splitting for waves propagating at high angle to the foliation.
ISSN: 0031-9201

hal-01389712
http://hal.univ-reunion.fr/hal-01389712
http://hal.univ-reunion.fr/hal-01389712/document
http://hal.univ-reunion.fr/hal-01389712/file/Barruol_Kern-PEPI96_hal.pdf
DOI : 10.1016/0031-9201(95)03124-3

Éditeur(s) : Amer Geophysical Union
Résumé : Seismic noise is an indirect source of information on ocean waves. Using a model of noise generation and propagation, seismic stations can be separated into those that are mostly sensitive to local sea states, and those that integrate sources from a large oceanic area. The model also provides a classification of noise-generating sea states into three classes. The analysis of Central California seismic noise data, well correlated with local waves, reveals that class I events dominate in summer, caused by a single wind-sea system, and for which ocean wave spectral levels are proportional to seismic spectral levels to an exponent b similar or equal to 0.9. In winter, noise is dominated by class II generation, for which coastal reflection is important, with a wave spectral density roughly proportional to the seismic spectral density to an exponent b similar or equal to 0.7. Sporadic events of class III probably produce some of the strongest noise events in Central California and need to be properly screened. These events are caused by opposed wave systems that are usually the wind-sea and a swell. This noise classification can be used to improve on the correlation between measured and estimated wave heights(up to r = 0.93 for daily averages). For other locations, where remote oceanic sources are recorded, a significant wave height estimated from the seismic noise compares well with area-averaged satellite data or wave model results(r > 0.85 for daily averages). These analyses pave the way for quantitative uses of seismic records, including the reconstruction of past wave climates, and the calibration of wave hindcasts.
Journal Of Geophysical Research-oceans (0148-0227) (Amer Geophysical Union), 2012-05 , Vol. 117 , N. C05002 , P. 19 pp.

Droits : 2012 AGU
http://archimer.ifremer.fr/doc/00083/19443/17051.pdf
DOI:10.1029/2011JC007449
http://archimer.ifremer.fr/doc/00083/19443/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study analyses the interactions between deformation and reactive fluid and melt percolation, and their effects on sub-arc mantle seismic properties based on microstructural observations on mantle xenoliths extracted by the Tubaf and Edison seamounts close to the Lihir Island, in the Papua New Guinea archipelago. These xenoliths sample an oceanic lithosphere, which has experienced high-temperature deformation in the presence of fluids or melts. This was followed by metasomatism under static conditions. Syn-kinematic percolation of reactive Si-rich melts or fluids in peridotites has produced pyroxene-enrichment, grain size reduction, and dispersion of olivine crystal preferred orientation (CPO). Fourier transform infrared spectroscopy analyses show that olivine has very low water contents (1-4 wt. ppm H2O), similar to spinel peridotites from other subduction zones. These low values may record both low water solubility in olivine at low pressure and dehydration during transport and exhumation. Water contents in pyroxenes are highly variable and likely result from spatially heterogeneous melt or fluid percolation. Analysis of olivine CPO indicates dominant activation of both (010)[100] and (001)[100] slip systems, which are characteristic of deformation under high temperature, low stress, low pressure and low to moderate hydrous conditions. Fast S-wave polarization and P- and Rayleigh propagation directions are thus parallel to the mantle flow direction. The pyroxene enrichment by melt-rock reactions is accompanied by dispersion of olivine CPO and induces a significant decrease of the maximum S-wave and P-wave anisotropy in the peridotites. The calculated seismic properties also show that the lowest Vp/Vs ratios (< 1.7) mapped in fore-arc mantle may only be explained by taking in consideration the CPO-induced elastic anisotropy of the peridotites.
ISSN: 0040-1951

hal-00950058
https://hal.archives-ouvertes.fr/hal-00950058
DOI : 10.1016/j.tecto.2013.09.024

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We explore the relations between deformation, annealing, and melt percolation during rifting and the effect of these processes on seismic anisotropy by analyzing the microstructures and crystal preferred orientations (CPO) in a suite of mantle xenoliths from Mega, in the southern end of the Ethiopian rift. Previous geochemical studies on these xenoliths showed evidence for interactions with variable melt types and volumes during the rifting process. The peridotites have dominantly coarse-porphyroclastic microstructures, but coarse granular or partially recrystallized microstructures also occur. The olivine CPO, characterized by orthorhombic to fiber-[100] patterns and moderate intensities, the common occurrence of (100) tilt walls, and the predominance of <0vw> rotation axes accommodating low angle misorientations in olivine support deformation by dislocation creep with dominant activation of the [100](010) system. Annealing (static recrystallization) of variable intensity followed this deformation. Modal enrichment in pyroxenes in > 60% of the studied peridotites corroborates extensive, but spatially heterogeneous reactive melt percolation leading to refertilization of the lithospheric mantle beneath the southern Ethiopian rift. The common interstitial shapes of the pyroxenes and lack of correlation between the pyroxenes and the olivine CPOs in many samples suggest that part of the refertilization is post-kinematic. However, there is no simple relation between reactive melt percolation and annealing of the olivine deformation microstructure. Comparison with data from other xenolith localities points to changes in the metasomatic imprint in the lithospheric mantle along the East African rift system correlated with the evolution in the rift maturity. Seismic properties averaged over all samples show typical lithospheric mantle patterns with fast propagation of P- and polarization of the fast S-waves parallel to the lineation. The anisotropy is moderate (< 6% for P-waves and < 4% for S-waves), implying that aligned melt must contribute to the strong seismic anisotropy measured in the Main Ethiopian rift, north of Mega.
ISSN: 0040-1951

hal-01355918
https://hal.archives-ouvertes.fr/hal-01355918
DOI : 10.1016/j.tecto.2016.05.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melt generation in the continental crust is thought to significantly influence seismic bulk velocities and anisotropy, although existing laboratory data provide limited constraints on such seismic attributes. In this study we measured ultrasonic compressional wave speeds (Vp) and anisotropy during sample compaction, mica-breakdown and melt-generation in synthetic, foliated quartz–muscovite aggregates. Measurements were performed at peak conditions of 300 MPa hydrostatic confining pressure and 750 °C, over a six hour time period, for three separate samples where wave propagation directions were aligned at 0°, 45° and 90° with respect to the foliation plane. The experiments are initially marked by sample compaction and rapid reduction in porosity (from 25% to <2 vol%), with a corresponding increase in Vp. During initial stages of the experiment Vp ranges from 4.65 to 5.45 km/s, depending on the direction of the P wave propagation, resulting in up to ∼16% anisotropy, which originates mainly from the preferred orientation of muscovite and possible incipient melt lenses oriented parallel to foliation. As the experiment progresses the bulk Vp decreases gradually and Vp anisotropy drops from ∼16% to ∼2% after five hours into the experiment. The drop in anisotropy is caused by muscovite-breakdown and increasing amount of partial melting of the aggregate. The bulk velocities are considerably lower than predicted for a mixture of muscovite and β-quartz (stable at 300 MPa and 750 °C). Thermodynamic modeling indicates that mica breakdown and production of melt with ∼2 wt% dissolved water in the aggregate can explain the low Vp, even though β-quartz is stable; the modeled Vp is ∼4.75 km/s at 300 MPa and 750 °C. These ultrasonic attributes signify movement of the melt to fill vacant pores and coating grain boundaries, effectively connecting melt films and reducing seismic anisotropy. The results may apply to regions where crustal melting is on-going, in particular regions of elevated temperature that are only weakly deforming, with coupled anomalously low bulk velocities and seismic anisotropy.
ISSN: 0012-821X

hal-01243569
https://hal.archives-ouvertes.fr/hal-01243569
DOI : 10.1016/j.epsl.2015.05.039

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz spans the plate boundary between Africa and Eurasia west of the Betic–Rif mountain belt. A narrow east dipping subduction zone descends beneath the Gulf of Cadiz and the straits of Gibraltar. The deep crustal structure of the Gulf and the adjacent SW Iberian and Moroccan margins is constrained by numerous multi-channel seismic reflection and wide-angle seismic surveys. A compilation of these existing studies is presented in the form of depth to basement, sediment thickness, depth to Moho and crustal thickness maps. These structural maps image an E–W trending trough, with thin (< 10 km) crust beneath the Gulf of Cadiz. This trough is filled by an eastward thickening wedge of sediments, reaching a thickness of 10–15 km in the eastern Gulf. These sediments are tectonically deformed, primarily along a series of westward-vergent thrust faults and represent a 200–250 km wide accretionary wedge. The northern and especially the southern limits of the accretionary wedge are marked by sharp morphological lineaments showing evidence of recent deformation. These tectonic limits are situated in an internal position with respect to the Miocene deformation front (external Betic and Rif allocthons), which has been abandoned. At the western boundary of the accretionary wedge, near the adjacent Seine and Horseshoe abyssal plains, an E–W trending basement high (Coral Patch Ridge) can be seen indenting the deformation front in an asymmetric manner. Analog modeling is performed using granular materials accreted against a semicircular backstop (representing the basement of the Rif and Betic mountain belts). The modeling initially produces a symmetric, arcuate accretionary wedge. The ensuing collision of an oblique rigid indenter retards accretion on one side, resulting in an embayment and a locally steeper deformation front. The deformation pattern observed in morphology and high-resolution seismic profiles suggests the accretionary wedge and underlying subduction system is still active. The implications of active subduction for the source region of the 1755 Lisbon earthquake and the regional seismic hazard assessment are discussed.
ISSN: 0040-1951

hal-00424922
http://hal.univ-brest.fr/hal-00424922
http://hal.univ-brest.fr/hal-00424922/document
http://hal.univ-brest.fr/hal-00424922/file/Gutscher_09Tphys_rev.pdf
DOI : 10.1016/j.tecto.2008.11.031

Éditeur(s) : American Geophysical Union
Résumé : Noise with periods 3 to 10 s, ubiquitous in seismic records, is expected to be mostly generated by pairs of ocean wave trains of opposing propagation directions with half the seismic frequency. Here we present the first comprehensive numerical model of microseismic generation by random ocean waves, including ocean wave reflections. Synthetic and observed seismic spectra are well correlated (r > 0.85). On the basis of the model results, noise generation events can be clustered in three broad classes: wind waves with a broad directional spectrum (class I), sea states with a significant contribution of coastal reflections (class II), and the interaction of two independent wave systems (class III). At seismic stations close to western coasts, noise generated by class II sources generally dominates, but it is intermittently outshined by the intense class III sources, limiting the reliability of seismic data as a proxy for storm climates. The modeled seismic noise critically depends on the damping of seismic waves. At some mid-ocean island stations, low seismic damping is necessary to reproduce the observed high level and smoothness of noise time series that result from a spatial integration of sources over thousands of kilometers. In contrast, some coastal stations are only sensitive to noise within a few hundreds of kilometers. This revelation of noise source patterns worldwide provides a wealth of information for seismic studies, wave climate applications, and new constraints on the possible directional distribution of wave energy.
Journal of Geophysical Research ( JGR ) - Oceans (0148-0227) (American Geophysical Union), 2011-09 , Vol. 116 , N. C09004 , P. 21 p.

Droits : 2011 by the American Geophysical Union
http://archimer.ifremer.fr/doc/00044/15531/12926.pdf
DOI:10.1029/2011JC006952
http://archimer.ifremer.fr/doc/00044/15531/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
An active seismic experiment has been conducted across the southern Ryukyu margin east of Taiwan over the whole trench-arc-backarc system in May 2009. Twenty-four ocean bottom seismometers (OBS) were deployed from the Ryukyu trench to the southern Okinawa trough over the Ryukyu arc and forearc. Wide angle seismic data were recorded by the OBS array while coincident reflection seismic data were acquired using a 6 km long streamer and a 6600 cubic inch seismic airgun array. Results from tomographic inversion of 21091 travel time picks along this line allowed us to image crustal structures of the Ryukyu margin down to a depth of 25 km. The transect has been designed to provide a better seismic velocity structure of the subduction zone in a highly deformed area that has produced an M8 earthquake in 1920. The line crosses a seismic cluster of earthquakes which source mechanisms are still poorly understood. The subducting oceanic crust of the Huatung Basin is about 5-6 km thick. The underlying mantle exhibits low seismic velocities around 7.8 km/s suggesting some hydrothermal alterations or alteration of the upper mantle through faults generated by the flexure of the subducting plate as it enters the subduction. Low velocities, up to 4.5 km/s, associated with the accretionary wedge are well imaged from the trench back to the Nanao forearc. A major result concerns the abrupt termination of the buttress at the rear of the accretionary wedge. Despite the low resolution of the tomographic inversion near the subduction interface, several lines of evidence supporting the presence of a low velocity zone beneath the toe of the forearc buttress could be established. The Moho beneath the Ryukyu non-volcanic arc is located at a depth around 25 km depth.
ISSN: 0040-1951

hal-00795573
https://hal.archives-ouvertes.fr/hal-00795573
DOI : 10.1016/j.tecto.2011.10.010

Éditeur(s) : HAL CCSD
Résumé : Karstic aquifers represent the most important fresh water reservoirs in many regions of the world like the Mediterranean Basin. However, because of complex processes of karstification, those aquifers are highly heterogeneous at all spatial scales and vulnerable to contamination. In this dissertation, we studied the potential of gravimetry and ambient seismic noise for hydrological modeling in karstic areas.The dolomitic area surrounding the “GEK” observatory in the Durzon catchment on the Larzac plateau, in France, is the preferred site for these studies. Inside the observatory, a superconducting gravimeter dedicated to hydrology has continuously measured gravity changes since 2011 with high precision, undertaken for the first time on a karst. From this gravity monitoring, we made conceptual hydrological models which laid the foundation of 1-D flow physical models. Indeed, gravimetry is an integrative hydro-geophysical method which allows 1) to consider the epikarst, locally heterogeneous as an equivalent tabular medium and 2) to define the types of transfer (fast & slow) occurring at the site. Especially, the lack of fast transfer through the GEK epikarst was precisely quantified for the first time at the field scale (~100m). Gravity-driven water mass balance with local meteorological data (evapotranspiration from a flux tower and precipitation) allowed setting the bottom outlet of the model to 1 mm.day-1. This flow has proved to be representative of the low-flow discharge at the only spring which represents all groundwater outflows from the catchment. This result supposes the homogeneity of the dolomitic epikarst almost at the basin scale. Model parameters were next calibrated using one year of ambient seismic noise monitored at two stations. Phase velocity changes obtained by cross-correlating the noise between 6 and 8 Hz were used as a ”timer” to follow the water infiltration between a depth of 30 and 60 meters. Thus, monitoring seismic velocity changes using ambient seismic noise demonstrates great potential for the study of deep and complex critical zones and could fill the instrumental gap currently existing in hydrology.Time-lapse gravity measurements with a spring-based portable gravimeter have also demonstrated the different behavior of two epikarsts and their variability at the scale of a few hundred meters. Monthly measurements around the observatory revealed the spatial homogeneity of this dolomitic epikarst: all the stations showed the same water storage changes. On the contrary, seasonal surface to depth gravity measurements along the underground passage of the Saint-Ferréol sinkhole, in limestone, have shown fast transfer and strong spatial variability of water storage. Lithology is then expected to play a part in the epikarst capacity to retain water. The precision needed to measure the weak hydrological induced signals during those surveys required robust methodology and an ambient temperature effect on measurements with spring-based gravimeter was observed in the field and quantified in the laboratory.
Les aquifères karstiques représentent des ressources en eau essentielles dans de nombreuses régions du monde comme le bassin Méditerranéen. Cependant, de par les processus complexes de karstification, ces aquifères sont hétérogènes à de nombreuses échelles et vulnérables. Dans cette thèse, nous étudions le potentiel de la gravimétrie et du bruit sismique ambiant pour la modélisation hydrologique en milieu karstique.Le site dolomitique de l’observatoire « GEK », sur le bassin du Durzon dans le Larzac, est le site d’étude privilégié de ces travaux. Dans l’observatoire, un gravimètre supraconducteur dédié à l’hydrologie mesure depuis 2011 les variations de gravité en continu et à une très haute précision, pour la première fois sur un karst. Des modèles hydrologiques conceptuels ont été réalisés à partir de cette surveillance gravimétrique et ont permis de poser les bases de modèles physiques d’écoulements 1-D. En effet la gravimétrie, intégratrice, permet 1) de considérer l’épikarst localement hétérogène comme un milieu tabulaire équivalent et 2) de définir les types de transfert à l’œuvre sur le site. En particulier, l’absence de transfert rapide dans l’épikarst a été quantifiée avec précision pour la première fois à l’échelle du terrain (~100m). A l’aide de données météorologiques locales, un bilan de masse précis a permis de définir le flux en limite inférieure du modèle à 1 mm.jour-1. Ce flux s’est montré représentatif du débit de basses-eaux de la source drainant l’ensemble du bassin. Ce résultat suppose une homogénéité de l’épikarst dolomitique quasiment à l’échelle du bassin. Les paramètres des modèles physiques ont ensuite pu être calibrés à l’aide d’un an d’intercorrélation du bruit sismique ambiant entre deux stations. Les variations de vitesses de phase obtenues entre 6 et 8Hz nous ont servi de « chronomètre » pour suivre l’infiltration entre 30 et 60m de profondeur. La surveillance passive des variations de vitesses sismiques par intercorrélation du bruit sismique ambiant montre ainsi un fort potentiel pour l’étude des zones critiques profondes et complexes à l’échelle du terrain et peut combler la lacune instrumentale qui existe actuellement en hydrologie.Des campagnes répétées de mesures avec un gravimètre portable à ressort ont également mis en évidence le fonctionnement différent de deux épikarsts et leur variabilité à l’échelle de la centaine de mètres. Des mesures mensuelles autour de l’observatoire ont mis en évidence l’homogénéité spatiale de cet épikarst dolomitique : toutes les stations ont les mêmes variations temporelles de stock d’eau. Au contraire, des mesures saisonnières en surface et en profondeur le long de la galerie souterraine calcaire de l’abîme de Saint-Ferréol ont montré une variabilité spatiale forte du stockage ainsi que du transfert rapide. La lithologie de l’épikarst est donc suspectée de jouer un rôle dans sa capacité de stockage. Lors de ces campagnes, la faiblesse du signal recherché a nécessité une méthodologie précautionneuse et un effet de température sur les mesures des gravimètres relatifs à ressort a été observé sur le terrain et quantifié en laboratoire.
https://tel.archives-ouvertes.fr/tel-01649606

NNT : 2016MONTT128
tel-01649606
https://tel.archives-ouvertes.fr/tel-01649606
https://tel.archives-ouvertes.fr/tel-01649606/document
https://tel.archives-ouvertes.fr/tel-01649606/file/2016_FORES_archivage.pdf

Éditeur(s) : HAL CCSD
Résumé : The Lesser Antilles is an area of high volcanic and earthquake activity, characterized by a 1000 km convergence zone resulting from the Atlantic plate subduction under the Caribbean plate with a slow convergent motion (2 cm/year). With five years of available data, the CDSA data base presents a more homogeneous vision of Lesser Antilles arc seismicity and allows detecting low seismic activity zones, in the north near the Virgin Islands, and in the south between St-Lucia and Grenada. The accuracy improvements of location is used to better study the relationship between tectonic structures and seismicity, to better define the subduction slab geometry, and to analyse the spatial variations of the Gutenberg-Richter law b-value. Concerning the 21 november 2004 Les Saintes earthquake, EMS98 intensities in Les Saintes islands were evaluated from an individual request and hypocenter relocalisations of the Les Saintes earthquake and the biggest aftershock of 14 february 2005 were made using a method of master/slave in order to contrain the seismic source of the mainchock. As seismic hazard assessment depends from strong ground motion generated by earthquakes, the last part of this work concerns modeling accelerometric records of the Les Saintes earthquakes, combining a composite source model with an empirical Green Function technique. In our study, we used Les Saintes aftershocks as Empirical Green Function.
L'arc des Petites Antilles situé sur la bordure nord-est de la plaque Caraïbe, résulte d'un phénomène de subduction, les plaques américaines plongeant sous celle de la Caraïbe avec une vitesse de 2 cm/an. Les Antilles Françaises représentent la région française où le risque sismique est le plus important. Ce travail dont l'objectif est d'améliorer la connaissance de l'aléa sismique dans les Antilles Françaises, repose sur les données du Réseau Accélérométrique Permanent (RAP) et sur celles du « Centre de Données des Antilles Françaises ». L'analyse de ces données permet de mieux contraindre la sismicité de l'arc. Deux zones de très faible sismicité sont mises en évidence : au nord près des Iles Vierges et au sud entre Sainte-Lucie et Grenade. D'autres points sont aussi résolus : imagerie de la subduction le long de l'arc, relations entre la sismicité superficielle et la tectonique active, variations de la pente (b-value) de la loi de Gutenberg-Richter. Le séisme majeur du 21 novembre 2004 Mw=6.3 est au cœur des deux derniers chapitres. Plusieurs aspects y sont présentés : macrosismicité avec l'évaluation d'intensités EMS98 obtenues du dépouillement de formulaires individuels recueillis pour les Iles des Saintes, et relocalisation par la méthode de maître/esclave du choc principal et de sa plus forte réplique du 14 février 2005, de façon à mieux contraindre l'imagerie de la source du choc principal, étape primordiale pour la dernière partie portant sur la modélisation des signaux du choc principal des Saintes. Nous tentons dans cette dernière partie de modéliser les enregistrements de mouvements forts avec une approche semi-empirique en se basant sur un modèle stochastique large-bande et proposons l'utilisation de plusieurs Fonctions de Green Empiriques (FGE) sélectionnées parmi les répliques du séisme des Saintes.
https://tel.archives-ouvertes.fr/tel-00409021

tel-00409021
https://tel.archives-ouvertes.fr/tel-00409021
https://tel.archives-ouvertes.fr/tel-00409021/document
https://tel.archives-ouvertes.fr/tel-00409021/file/these_BengoubouMendy_2008.pdf

Éditeur(s) : HAL CCSD
Résumé : Taiwan is a young mountain belt, known as one of the most active area in the world. Since the beginning of the 20th century more than twenty _ Mw 7 earthquakes have struck the island. However, the occurrence of larger events (_Mw 8) is still a matter of debate. In this framework it is of key importance to obtain longer record in order to evaluate the occurrence of large past earthquakes. The sub-aqueous paleoseismology, based on the record of the sedimentary gravity deposits, appears as a serious alternative to approach this thematic and is a rapidly advancing field that has the potential to illuminate the long-term history of seismicity.The first part of this work was to investigate the present sedimentary systems off east Taiwan, essential to understand the morphosedimentary features, sedimentary facies and processes governing the evolution of the submarine slope, and the controlling factors of the recent sedimentation. Our results showed that the offshore slope east Taiwan is affected by a variety of sedimentary systems and processes, and that turbidity currents appear as the main erosional processes covering nearly 60% of the sedimentary record. Turbidity currents are generated by distinct controlling factors such as tectonic and climatic activity that enabled us to define twoend-members relative to turbidity currents initiation: Turbidity currents preconditioned by tectonic activity and triggered by earthquakes shaking and likely deposited into intra-slope basin and turbidity currents driven by climatic activity such as extreme floods or typhoons, generated in basin directly connected with onland rivers.The second part consisted to apply a paleoseismic approach, based on turbidites record, at two time-scales. First, we tested and validated the method by correlating turbidites deposits with instrumental earthquakes. Then, once calibrated we extended the time-series back in time. We dated the three most recent turbidites layers circa 2001 ± 3 AD, 1950 ± 5 AD and 1928 ± 10 AD. Using empirical relationship that link peakground acceleration, distance and magnitude to calibrate the seismic sources, we correlate these three turbidites with instrumental earthquakes: the Chengkong Earthquake 12/10/2003 (Mw 6.8), the 11/24/1951 Taitung Earthquake (Mw 7.1) and the 9/4/1935 Lutao Earthquake (Mw 7.0) respectively. Applying criteria to discriminating the different triggering mechanisms for turbidity current generation, we propose that earthquakes are the main triggering mechanisms. Dating and age modeling provided a part of the chronology of extreme events since the last 3000 years and allowed us to estimate return time for earthquakes Mw _ 6.8.This work represents a good starting-point for future investigations in order to better assess Holocene time series of extreme events.
La chaine de Taïwan représente l’une des zones les plus actives au monde. Depuis le début du XXe siècle, plus d’une vingtaine de séismes _Mw 7 ont affecté l’île. Cependant la probabilité d’occurrence de séismes plus importants (_Mw 8) est toujours matière à débat. Dans un tel contexte, il apparait donc important d’obtenir des enregistrements plus anciens pour évaluer l’occurrence de tels évènements. La paléosismologie marine, basée sur l’enregistrement des dépôts issus de la sédimentation gravitaire, apparait comme une alternative sérieuse afin d’illuminer l’histoire de la sismicité sur des périodes anciennes. Ce travail de thèse apporte de nouvelles contraintes sur l’histoire sismique au large, à l’est de Taïwan, au cours des derniers 3000 ans.La première partie de ce travail consiste à caractériser les systèmes sédimentaires récents. Cette étape fut essentielle pour la compréhension des processus, faciès sédimentaires et les facteurs de contrôle de la sédimentation qui régissent l’évolution de la pente sous-marine. Ces résultats ont montré que l’Est de Taïwan est caractérisé par une grande variabilité de processus et que les courants de turbidité dominent l’enregistrement sédimentaire.Les courants de turbidité sont générés par deux facteurs distincts : l’activité tectonique/sismique et l’activité climatique. La deuxième partie de ce travail est consacrée à l’approche paléosismique en utilisant les dépôts de turbidités comme marqueurs des paléoséismes. Pour ce faire, nous avons dans un premier temps testé et validé l’approche à l’échelle du siècle dernier. Ensuite une fois calibré, nous avons pu étendre les séries temporelles à l’échelle de l’Holocène. Nous avons daté les trois plus récents évènements turbiditiques autour de 2001 ± 3 AD, 1950 ± 5 AD et 1928 ± 10 AD. En utilisant des relations empiriques intégrant magnitude, distance et valeur du "peak ground acceleration", nous avons pu calibrer la source sismique et ainsi corréler ces trois turbidites à trois séismes instrumentaux : le séisme de Chengkong (12/10/2003) (Mw 6.8), le séisme de Taitung (11/24/1951) (Mw 7.1) et le séisme de Lutao (9/4/1935) (Mw 7.0). Au-delà du siècle dernier, les datations et modèles d’âges nous permettent d’établir une partie de la chronologie des évènements extrêmes sur une période de 3000 ans et d’estimer un temps de retour pour des évènements de l’ordre _Mw 7. Les résultats ont toutefois montré que ces temps de retour sont nettement supérieurs à ceux connus sur le siècle dernier, ce qui suggère que tous les séismes ne sont pas enregistrés par les dépôts sédimentaires marins. Ce travail de thèse a donc permis de montrer que les dépôts issus de la sédimentation évènementielle peuvent être considérés comme marqueurs de la sismicité et que cette approche peut constituer un outil complémentaire pour les études portant sur le risque sismique.
https://tel.archives-ouvertes.fr/tel-01661529

NNT : 2014MON20133
tel-01661529
https://tel.archives-ouvertes.fr/tel-01661529
https://tel.archives-ouvertes.fr/tel-01661529/document
https://tel.archives-ouvertes.fr/tel-01661529/file/55796_LEHU_2014_archivage_cor.pdf