Éditeur(s) : HAL CCSD
Résumé : 20 pp
We first analyze some atmospheric parameters measured in 2004 at the top of La Soufrière volcano: wind speed, pressure and temperature. Next, we study the stochastic process of the wind speed modulus which is of interest for prediction of pollution induced by the plume. We fit to the data various models : FARIMA, periodic trend plus multifractional Brownian noise, multifractal continuous cascades. The estimations show that they evoluate during some transition phases in response to environment changes. Thus, we finally suggest, for future works, some settings that should be more appropriate: time series with regime changes and stochastic processes in random environment.
https://hal.archives-ouvertes.fr/hal-00165572

hal-00165572
https://hal.archives-ouvertes.fr/hal-00165572
https://hal.archives-ouvertes.fr/hal-00165572/document
https://hal.archives-ouvertes.fr/hal-00165572/file/Windsouf_v11.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Over the years, a number of different models and techniques have been proposed to both quantify and explain the glacial isostatic adjustment (GIA) process. There are serious challenges, however, to obtaining accurate results from measurements, due to noise in the data and the long periods of time necessary to identify the relatively small-magnitude signal in certain regions. The primary difficulty, in general, is that most of the geophysical signals that occur in addition to GIA are nonstationary in nature. These signals are also corrupted by random as well as correlated noise added during data acquisition. The nonstationary characteristic of the data makes it difficult for traditional frequency-domain denoising approaches to be effective. Time-frequency filters present a more robust and reliable alternative to deal with this problem. This paper proposes an extended S transform filtering approach to separate the various signals and isolate that associated with GIA. Continuous global positioning system (GPS) data from eastern Canada for the period from June 2001 to June 2006 are analyzed here, and the vertical velocities computed after filtering are consistent with the GIA models put forward by other researchers.
ISSN: 0033-4553

hal-00795451
https://hal.archives-ouvertes.fr/hal-00795451
DOI : 10.1007/s00024-011-0404-1

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
A temporary network of 10 broad-band seismic stations has been installed in French Polynesia for the Polynesian Lithosphere and Upper Mantle Experiment (PLUME). All the seismic stations were installed either on volcanic islands or on atolls of the various archipelagos of French Polynesia in a manner which complements the geographic coverage provided by the regional permanent stations. The primary aim of PLUME is to image the upper mantle structures related to plate motion and hotspot activity. However, because of its proximity to all sites, the ocean is responsible for a high level of noise in the seismic data and we show that these data can also be used to analyse ocean wave activity. The power spectral density (PSD) analyses of the seismic data recorded in French Polynesia show clear peaks in the 0.05– 0.10 Hz band (periods between 10 and 20 s), which corresponds to swell frequencies. Clear peaks in this frequency band are also observed in infrasonic data recorded on Tahiti. Ground motion analysis shows that the swell-related seismic noise (SRSN) is linearly polarized in the horizontal plane and its amplitude decreases rapidly with the distance from the shore. The microseismic and the infrasonic 'noise' amplitudes show very similar variations from station to station and both are strongly correlated with the swell amplitudes predicted by the National Oceanic and Atmospheric Administration (NOAA), wind-forced, 'WaveWatch' models. The swell direction can be estimated from SRSN polarization analysis but this has to be done with care since, for some cases, the ground motions are strongly controlled by the islands' anisometric shapes and by swell refraction processes. We find cases, however, such as Tahiti or roughly circular Tuamotu atolls, where the azimuth of the swell is in good agreement with the seismic estimates. We, therefore, demonstrate that the SRSN and the infrasonic signal observed in French Polynesia can be used in such cases as a proxy for swell amplitude and azimuth. From the continuous analysis of the data recorded in 2003 at the permanent seismic station PPTL in Tahiti, transfer functions have been obtained. This could provide a way to quantify the swell activity during the last two decades and, therefore, assist in the investigation of climate changes.
ISSN: 0956-540X

hal-01323691
http://hal.univ-reunion.fr/hal-01323691
http://hal.univ-reunion.fr/hal-01323691/document
http://hal.univ-reunion.fr/hal-01323691/file/Barruol_et_al_2006.pdf
DOI : 10.1111/j.1365-246X.2006.02871.x

Éditeur(s) : IEEE
Résumé : This paper aims at studying the quality of the sea surface salinity (SSS) retrieved from soil moisture and ocean salinity (SMOS) data in coastal areas. These areas are characterized by strong and variable SSS gradients [several practical salinity units (psu) on relatively small scales: the extent of river plumes is highly variable, typically at kilometric and daily scales. Monitoring this variability from SMOS measurements is particularly challenging because of their resolution (typically 30-100 km) and because of the contamination by the nearby land. A set of academic tests was conducted with a linear coastline and constant geophysical parameters, and more realistic tests were conducted over the Bay of Biscay. The bias of the retrieved SSS has been analyzed, as well as the root mean square (rms) of the bias, and the retrieved SSS compared to a numerical hydrodynamic model in the semirealistic case. The academic study showed that the Blackman apodization window provides the best compromise in terms of magnitude and fluctuations of the bias of the retrieved SSS. Whatever the type of vegetation cover, a strong negative bias, greater than 1 psu, was found when nearer than 36 km from the coast. Between 44 and 80 km, the type of vegetation cover has an impact of less than a factor 2 on the bias, and no influence further than 80 km from the coast. The semirealistic study conducted in the Bay of Biscay showed a bias over ten days lower than 0.2 psu for distances greater than 47 km, due to an averaging over various geometries (coastline orientation, swath orientation, etc.). The bias showed a weak dependence on the location of the grid point within the swath. Despite the noise on the retrieved SSS, contrasts due to the plume of the Loire River and the Gironde estuary remained detectable on ten-day averaged maps with an rms of 0.57 psu. Finally, imposing thresholds on the major axis of the measurements brought little improvement to the bias, whereas it increased the rms and- could lead to strong swath restriction: a 49-km threshold on the major axis resulted in an effective swath of 800-900 km instead of 1200 km. NOT CONTROLLED OCR
Transactions on geoscience an remote sensing IEEE (0196-2892) (IEEE), 2007-07 , Vol. 45 , N. 7 , P. 2061-2072

Droits : 2007 IEEE
http://archimer.ifremer.fr/doc/2007/publication-3643.pdf
DOI:10.1109/TGRS.2007.894934
http://archimer.ifremer.fr/doc/00000/3643/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To improve earthquake location, we create a 3-D a priori P-wave velocity model (3-DVM) that approximates the large velocity variations of the Ecuadorian subduction system. The 3-DVM is constructed from the integration of geophysical and geological data that depend on the structural geometry and velocity properties of the crust and the upper mantle. In addition, specific station selection is carried out to compensate for the high station density on the Andean Chain. 3-D synthetic experiments are then designed to evaluate the network capacity to recover the event position using only P arrivals and the MAXI technique. Three synthetic earthquake location experiments are proposed: (1) noise-free and (2) noisy arrivals used in the 3-DVM, and (3) noise-free arrivals used in a 1-DVM. Synthetic results indicate that, under the best conditions (exact arrival data set and 3-DVM), the spatiotemporal configuration of the Ecuadorian network can accurately locate 70 per cent of events in the frontal part of the subduction zone (average azimuthal gap is 289° ± 44°). Noisy P arrivals (up to ± 0.3 s) can accurately located 50 per cent of earthquakes. Processing earthquake location within a 1-DVM almost never allows accurate hypocentre position for offshore earthquakes (15 per cent), which highlights the role of using a 3-DVM in subduction zone. For the application to real data, the seismicity distribution from the 3-D-MAXI catalogue is also compared to the determinations obtained in a 1-D-layered VM. In addition to good-quality location uncertainties, the clustering and the depth distribution confirm the 3-D-MAXI catalogue reliability. The pattern of the seismicity distribution (a 13 yr record during the inter-seismic period of the seismic cycle) is compared to the pattern of rupture zone and asperity of the Mw = 7.9 1942 and the Mw = 7.7 1958 events (the Mw = 8.8 1906 asperity patch is not defined). We observe that the nucleation of 1942, 1958 and 1906 events coincides with areas of positive Simple Bouguer anomalies and areas where marine terraces are still preserved on the coastal morphology. From north to south: (1) the 1958 rupture zone is almost aseismic and is attributed to a zone of high coupling; (2) south of the Galera alignment (perpendicular to the trench), the 1942 rupture zone presents moderate seismicity, deeper on the seismogenic interplate zone, and abutting on the Jama cluster (to the south). This cluster is facing the Cabo Pasado cap and positive Bouguer anomalies on the overriding margin. We suspect that this cluster reflects a zone of local asperity (partial coupling). South of the Jama cluster, the spherical aseismic zone in the Bahia area is interpreted as having a low seismic coupling (steady creep motion or slow slip events). We suspect that the site that generated the three M > 7 events (1896, 1956 and 1998) correspond to a small patch of strong coupling. To the south, in the Manta-Puerto Lopez zone, the seismicity is mainly organized in earthquake swarms (1998, 2002, 2005). Although slow slip events have been observed in the area (Vallée et al. submitted), we infer from the coastline shape, the marine terraces and the high positive Bouguer anomalies that the seismicity here might reveal a significant amount of seismic coupling.
ISSN: 0956-540X

hal-00873478
https://hal.archives-ouvertes.fr/hal-00873478
DOI : 10.1093/gji/ggs083

Éditeur(s) : HAL CCSD American Institute of Physics
Résumé : International audience
In order to be able to provide valuable data in multiparameter measurement field operations, tiltmeters need to have a noise level better or equal than 10-9 rad for a period range from a few minutes to a few years and a long term stability ranging from 10-7 to 10-8 rad/yr. Tiltmeter measurements should also be as much as possible insensitive to thermal disturbances, by taking great care of the horizontality of the base line tube first. Secondly, thermal responses have been assessed. We also took great care of the coupling of our tiltmeters with the bedrock. We've designed a long base tiltmeter with sensors in silica which has a low dilatation coefficient. The linear variable displacement transducer is based on coil coupling (powered by an alternative voltage). Finally we show the results of two 100 m silica water tube tiltmeters which were installed in a mine in the French Vosges massif in the framework of a hydrology research project. These instruments show a remarkably good stability (6.5×10-9 rad/month) and a low noise level (of the order of 10-11 rad). Toroidal and spheroidal free modes of the Earth were observed after the two last major earthquakes on Sumatra.
ISSN: 0034-6748

hal-00708013
https://hal.archives-ouvertes.fr/hal-00708013
https://hal.archives-ouvertes.fr/hal-00708013/document
https://hal.archives-ouvertes.fr/hal-00708013/file/2008_RSI.pdf
BIBCODE : 2008RScI...79c4502B

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Everyone is subject to environmental exposures from various sources, with negative health impacts (air, water and soil contamination, noise, etc.or with positive effects (e.g. green space). Studies considering such complex environmental settings in a global manner are rare. We propose to use statistical factor and cluster analyses to create a composite exposure index with a data-driven approach, in view to assess the environmental burden experienced by populations. We illustrate this approach in a large French metropolitan area. The study was carried out in the Great Lyon area (France, 1.2 M inhabitants) at the census Block Group (BG) scale. We used as environmental indicators ambient air NO2 annual concentrations, noise levels and proximity to green spaces, to industrial plants, to polluted sites and to road traffic. They were synthesized using Multiple Factor Analysis (MFA), a data-driven technique without a priori modeling, followed by a Hierarchical Clustering to create BG classes. The first components of the MFA explained, respectively, 30, 14, 11 and 9% of the total variance. Clustering in five classes group: (1) a particular type of large BGs without population; (2) BGs of green residential areas, with less negative exposures than average; (3) BGs of residential areas near midtown; (4) BGs close to industries; and (5) midtown urban BGs, with higher negative exposures than average and less green spaces. Other numbers of classes were tested in order to assess a variety of clustering. We present an approach using statistical factor and cluster analyses techniques, which seem overlooked to assess cumulative exposure in complex environmental settings. Although it cannot be applied directly for risk or health effect assessment, the resulting index can help to identify hot spots of cumulative exposure, to prioritize urban policies or to compare the environmental burden across study areas in an epidemiological framework.Journal of Exposure Science and Environmental Epidemiology advance online publication, 24 September 2014; doi:10.1038/jes.2014.66.
ISSN: 1559-0631

hal-01069587
https://hal.archives-ouvertes.fr/hal-01069587
https://hal.archives-ouvertes.fr/hal-01069587/document
https://hal.archives-ouvertes.fr/hal-01069587/file/Article_multiexpo_20140708_c.pdf
DOI : 10.1038/jes.2014.66

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : In this paper we present the potential of a new compact superconducting gravimeter (GWR iGrav) designed for groundwater monitoring. At first, 3 yr of continuous gravity data are evaluated and the performance of the instrument is investigated. With repeated absolute gravity measurements using a Micro-g Lacoste FG5, the calibration factor (−894.8 nm s−2 V−1) and the long-term drift of this instrument (45 nm s−2 yr−1) are estimated for the first time with a high precision and found to be respectively constant and linear for this particular iGrav. The low noise level performance is found similar to those of previous superconducting gravimeters and leads to gravity residuals coherent with local hydrology. The iGrav is located in a fully instrumented hydrogeophysical observatory on the Durzon karstic basin (Larzac plateau, south of France). Rain gauges and a flux tower (evapo-transpiration measurements) are used to evaluate the groundwater mass balance at the local scale. Water mass balance demonstrates that the karst is only capacitive: all the rainwater is temporarily stored in the matrix and fast transfers to the spring through fractures are insignificant in this area. Moreover, the upper part of the karst around the observatory appears to be representative of slow transfer of the whole catchment. Indeed, slow transfer estimated on the site fully supports the low-flow discharge at the only spring which represents all groundwater outflows from the catchment. In the last part of the paper, reservoir models are used to characterize the water transfer and storage processes. Particular highlights are done on the advantages of continuous gravity data (compared to repeated campaigns) and on the importance of local accurate meteorological data to limit misinterpretation of the gravity observations. The results are complementary with previous studies at the basin scale and show a clear potential for continuous gravity time-series assimilation in hydrological simulations, even on heterogeneous karstic systems.
ISSN: 0956-540X

hal-01526965
https://hal.archives-ouvertes.fr/hal-01526965
https://hal.archives-ouvertes.fr/hal-01526965/document
https://hal.archives-ouvertes.fr/hal-01526965/file/fores2016.pdf
DOI : 10.1093/gji/ggw396

Éditeur(s) : HAL CCSD
Résumé : Different applications of linear elasticity in structural geology are presented in this thesis through the development of three types of numerical computer codes. The first one uses forward modeling to study displacement and perturbed stress fields around complexly faulted regions. We show that incorporating inequality constraints, such as static Coulomb friction, enables one to explain the angle of initiation of jogs in extensional relays. Adding heterogeneous material properties and optimizations, such as parallelization on multicore architectures and complexity reduction, admits more complex models. The second type deals with inverse modeling, also called parameter estimation. Linear slip inversion on faults with complex geometry, as well as paleo-stress inversion using a geomechanical approach, are developed. The last type of numerical computer code is dedicated to restoration of complexly folded and faulted structures. It is shown that this technique enables one to check balanced cross-sections, and also to retrieve fault chronology. Finally, we show that this code allows one to smooth noisy 3D interpreted faulted and folded horizons using geomechanics.
Différentes applications de l'élasticité linéaire en géologie structurale sont présentées dans cette thèse à travers le développement de trois types de codes numériques. Le premier utilise la modélisation directe pour étudier les déplacements et champs de contraintes autour de zones faillées complexes. On montre que l'ajout de contraintes inégalitaires, telles que la friction de Coulomb, permet d'expliquer l'angle d'initiation des dominos dans les relais extensifs. L'ajout de matériaux hétérogènes et d'optimisations, telles la parallélisation sur processeurs multi-coeurs ainsi que la réduction de complexité des modèles, permettent l'étude de modèles beaucoup plus complexes. Le second type de code numérique utilise la modélisation inverse, aussi appelée estimation de paramètres. L'inversion linéaire de déplacements sur les failles ainsi que la détermination de paléo-contraintes utilisant une approche géomécanique sont développées. Le dernier type de code numérique concerne la restauration de structures complexes plissées et faillées. Il est notamment montré qu'une telle méthode permet de vérifier l'équilibre de coupes géologiques, ainsi que de retrouver la chronologie des failles. Finalement, nous montrons que ce même code permet de lisser des horizons 3D faillés, plissés et bruités en utilisant la géomécanique.
https://tel.archives-ouvertes.fr/tel-00537899

tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899/document
https://tel.archives-ouvertes.fr/tel-00537899/file/thesemaerten.pdf

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The present study tested different sounds that could disturb eagle rays (Aetobatus ocellatus) during their foraging activities at Moorea, French Polynesia. Results showed that artificial white sound and single-frequency tones (40 Hz, 600 Hz or 1 kHz) did not have an effect on rays (at least 90% of rays continued to forage over sand), while playbacks of boat motor sound significantly disturbed rays during foraging activity (60% exhibited an escape behaviour). Overall, our study highlighted the negative effect of boat noises on the foraging activity of eagle rays. These noises produced by boat traffic could, however, have some positive effects for marine aquaculture if they could be used as a deterrent to repel the eagle rays, main predators of the pearl oysters.
Notre étude teste différents types de sons qui pourraient perturber les raies-aigles (Aetobatus ocellatus) pendant leur prise de nourriture dans le lagon de Moorea, en Polynésie française. Les résultats montrent que le bruit artificiel blanc ou des fréquences uniques (40 Hz, 600 Hz ou 1 kHz) n’ont aucun effet sur les raies (au moins 90 % des raies continuent de se nourrir dans le sable), tandis que l’enregistrement d’un moteur de bateau les perturbe significativement dans cette activité (60 % des individus ont un comportement de fuite). Notre étude met ainsi en évidence l’effet négatif des bruits anthropogéniques sur les activités de nourrissage des raies-aigles. Ces bruits produits par les bateaux pourraient néanmoins avoir un effet positif pour l’aquaculture marine s’ils pouvaient être utilisés comme répulsifs des raies, principaux prédateurs de l’huître perlière.
ISSN: 1631-0691

Droits : http://creativecommons.org/licenses/by-nc-nd/
hal-01297683
https://hal-univ-perp.archives-ouvertes.fr/hal-01297683
https://hal-univ-perp.archives-ouvertes.fr/hal-01297683/document
https://hal-univ-perp.archives-ouvertes.fr/hal-01297683/file/1-s2.0-S1631069116000020-main.pdf
DOI : 10.1016/j.crvi.2016.01.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Much research is being carried out into indoor exposure to harmful agents. This review focused on the impact on children's health, taking a broad approach to the indoor environment and including chemical, microbial, physical and social aspects. Papers published from 2006 onwards were reviewed, with regards to scientific context. Most of publications dealt with chemical exposure. Apart from the ongoing issue of combustion by-products, most of these papers concerned semi volatile organic compounds (such as phthalates). These may be associated with neurotoxic, reprotoxic or respiratory effects and may, therefore, be of particular interest so far as children are concerned. In a lesser extent, volatile organic compounds (such as aldehydes) that have mainly respiratory effects are still studied. Assessing exposure to metals is still of concern, with increasing interest in bioaccessibility. Most of the papers on microbial exposure focused on respiratory tract infections, especially asthma linked to allergens and bio-aerosols. Physical exposure includes noise and electromagnetic fields, and articles dealt with the auditory and non auditory effects of noise. Articles on radiofrequency electromagnetic fields mainly concerned questions about non-thermal effects and papers on extremely low-frequency magnetic fields focused on the characterization of exposure. The impact of the indoor environment on children's health cannot be assessed merely by considering the effect of these different types of exposure: this review highlights new findings and also discusses the interactions between agents in indoor environments and also with social aspects.
ISSN: 1438-4639

hal-00687403
https://hal.archives-ouvertes.fr/hal-00687403
DOI : 10.1016/j.ijheh.2011.07.008
PUBMED : 21889403

Éditeur(s) : HAL CCSD Institute of Electrical and Electronics Engineers (IEEE)/Optical Society of America(OSA)
Résumé : International audience
Nanometric displacement measurements by Extrinsic Fiber Fabry-Perot interferometers (EFPI) is extremely susceptible to external environmental changes. Temperature, in particular, has a remarkable influence on the optical power and wavelength of the laser diode in use, in addition to the thermal expansion of the mechanical structure. In this paper we propose an optimization of the EFPI sensor in order to use it for very long-term (more than one year) and for high-precision displacement measurements. For this purpose, a real time and adaptive estimation procedure based on a homodyne technique and a Kalman filter is established. During a sinusoidal laser diode current modulation, the Kalman filter provides a correction of the amplitude drift caused by the resultant optical power modulation and external perturbations. Besides, stationary temperature transfer operators are estimated via experimental measurements to reduce the additive thermal noise induced in the optical phase and mechanical components.
ISSN: 0733-8724

hal-00876339
https://hal.archives-ouvertes.fr/hal-00876339
DOI : 10.1109/JLT.2012.2194476

Éditeur(s) : HAL CCSD
Résumé : Point processes are often used as spatial or spatio-temporal distribution models of occurrences. In this PhD dissertation, we focus first on Cox processes driven by a hidden process associated with a Dirichlet process. This model corresponds to hidden occurrences influencing the stochastic intensity of observed occurrences. We generalize the notion of "Shot noise Cox process" introduced by M{o}ller and develop its bayesian analysis by a Gibbs sampler combined with a Metropolis-Hastings algorithm. We show that our MCMC method is a reversible jump one. The model takes into account a random number of hidden contributions producing effects on the observed point process intensity. Therefore the parameter space has a variable dimension. We focus the statistical inference on the estimation of the hidden contribution expected value, the hidden contribution expected number, the spatial influence and correlation parameters. The contribution equality test and contribution independence test are proposed. Applications in epidemiology and ecology are shown from extit{Rubus fruticosa} data, extit{Ibicella lutea} data and death number data in counties of Georgia, USA. Two situations are considered with respect to available data~: firstly, the spatial positions of occurrences are observed between several pairs of consecutive dates; secondly, counts are carried out over a fixed time interval in several spatial sampling units. Secondly, we focus on point processes with memory introduced by Kagan, Ogata and Vere-Jones, pioneers in statistical seismology. In fact, spatio-temporal point processes play an important role in the studies of earthquake catalogs since they consist of seismic events with their dates and spatial locations. We studied an ETAS (Epidemic Type Aftershock Sequence) model with time independent background intensity and several triggering functions taking into account previous events. We illustrate our approach with a seismicity study of the Lesser Antilles arc. A comparaison study of Gamma, Weibull, Log-Normal and modified Omori law triggering function models is also carried out. We show that the modified Omori law does not fit the Lesser Antilles seismic data and the best adjusted triggering function is the Weibull model. Consequently, the waiting time between aftershocks is weaker in the Lesser Antilles zone compared to the one in regions with seismicity described by the modified Omori law. In other words, aftershock aggregativity is higher in the Lesser Antilles region. The stochastic background intensity following a Dirichlet process centered on a spatial log-normal process is discussed.
Les processus ponctuels sont souvent utilisés comme modèles de répartitions spatiales ou spatio-temporelles d'occurrences. Dans cette thèse, nous nous intéressons tout d'abord à des processus de Cox dirigés par un processus caché associé à un processus de Dirichlet. Ce modèle correspond à des occurrences cachées influençant l'intensité stochastique des occurrences observées. Nous généralisons la notion de " Shot noise Cox process " introduite par Moller et développons le traitement bayésien par un échantillonneur de Gibbs combiné à un algorithme de Metropolis-Hastings. Nous montrons que cette méthode MCMC est à sauts réversibles. Le modèle prend en compte, en effet, un nombre aléatoire de contributions cachées influençant l'intensité du processus ponctuel observé donc a un espace paramétrique de dimension variable. Nous focalisons l'inférence statistique sur l'estimation de la valeur espérée de chaque contribution cachée, le nombre espéré de contributions cachées, le degré d'influence spatiale de ces contributions et leur degré de corrélation. Le test d'égalité des contributions et celui de leur indépendance sont ainsi développés. L'utilité en épidémiologie et en écologie est alors démontrée à partir de données de Rubus fruticosa, Ibicella lutea et de mortalité dans les cantons de Georgia, USA. En termes de données observées, deux situations sont considérées: premièrement, les positions spatiales des occurrences sont observées entre plusieurs paires de dates consécutives; deuxièmement, des comptages sont effectués, au cours d'une période fixée, dans des unités d'échantillonnage spatiales. D'autre part, nous nous intéressons aux processus ponctuels à mémoire introduits par Kagan, Ogata et Vere-Jones, précurseurs de la statistique sismologique. En effet, les processus ponctuels spatio-temporels ont une place importante dans l'étude des catalogues sismiques puisque ces derniers sont généralement constitués d'événements sismiques datés et géo-référencés. Nous avons étudié un modèle ETAS (Epidemic Type Aftershock Sequence) avec une intensité d'arrière-plan indépendante du temps et plusieurs fonctions déclenchantes permettant d'intégrer les événements antérieurs récents. Cette approche est utilisée pour étudier la sismicité de l'arc des Petites Antilles. Une étude comparative des modèles Gamma, Weibull, Log-Normal et loi d'Omori modifiée pour les fonctions déclenchantes est menée. Nous montrons que la loi d'Omori modifiée ne s'ajuste pas aux données sismiques des Petites Antilles et la fonction déclenchante la plus adaptée est le modèle de Weibull. Cela implique que le temps d'attente entre répliques dans la zone des Petites Antilles est plus faible que celui des régions à sismicité décrite par la loi d'Omori modifiée. Autrement dit, l'agrégation des répliques après un événement majeur est plus prononcée dans la zone des Petites Antilles. La possibilité d'inclure une intensité d'arrière-plan suivant un processus de Dirichlet centré sur un processus spatial log-gaussien est discutée.
https://tel.archives-ouvertes.fr/tel-00841146

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2012AGUY0555
tel-00841146
https://tel.archives-ouvertes.fr/tel-00841146
https://tel.archives-ouvertes.fr/tel-00841146/document
https://tel.archives-ouvertes.fr/tel-00841146/file/these_VALMY.pdf

Éditeur(s) : Elsevier Sci Ltd
Résumé : A multi-scale global hindcast of ocean waves is presented that covers the years 1994-2012, based on recently published parameterizations for wind sea and swell dissipation [Ardhuin, F., Rogers, E., Babanin, A., Filipot, J.-F., Magne, R., Roland, A., van der Westhuysen, A., Queffeulou, P., Lefevre, J.-M., Aouf, L., Collard, F., 2010. Semi-empirical dissipation source functions for wind-wave models: Part I. Definition, calibration and validation. J. Phys. Oceanogr. 40 (9), 1917-1941]. Results from this hindcast include traditional wave parameters, like the significant wave height and mean periods, and we particularly consider the accuracy of the results for phenomenal sea states, with significant heights above 14 m. Using unbiased winds, there is no evidence of a bias in wave heights even for this very high range. Various spectral moments were also validated, including the surface Stokes drift and mean square slopes that are relevant for wave-current interactions modelling and remote sensing, and also spectra of seismic noise sources. The estimation of these parameters is made more accurate by the new wave growth and dissipation parameterizations. Associated air-sea fluxes of momentum and energy are significantly different from what is obtained with the WAM-Cycle 4 parameterization, with a roughness that is practically a function of wind speed only. That particular output of the model does not appear very realistic and will require future adjustments of the generation and dissipation parameterizations.
Ocean Modelling (1463-5003) (Elsevier Sci Ltd), 2013-10 , Vol. 70 , P. 174-188

Droits : 2012 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00155/26582/25477.pdf
DOI:10.1016/j.ocemod.2012.12.001
http://archimer.ifremer.fr/doc/00155/26582/

Éditeur(s) : Ieee-inst Electrical Electronics Engineers Inc
Résumé : We validate Soil Moisture and Ocean Salinity (SMOS) sea surface salinity (SSS) retrieved during August 2010 from the European Space Agency SMOS processing. Biases appear close to land and ice and between ascending and descending orbits; they are linked to image reconstruction issues and instrument calibration and remain under study. We validate the SMOS SSS in conditions where these biases appear to be small. We compare SMOS and ARGO SSS over four regions far from land and ice using only ascending orbits. Four modelings of the impact of the wind on the sea surface emissivity have been tested. Results suggest that the L-band brightness temperature is not linearly related to the wind speed at high winds as expected in the presence of emissive foam, but that the foam effect is less than previously modeled. Given the large noise on individual SMOS measurements, a precision suitable for oceanographic studies can only be achieved after averaging SMOS SSS. Over selected regions and after mean bias removal, the precision on SSS retrieved from ascending orbits and averaged over 100 km $times$ 100 km and 10 days is between 0.3 and 0.5 pss far from land and sea ice borders. These results have been obtained with forward models not fitted to satellite L-band measurements, and image reconstruction and instrument calibration are expected to improve. Hence, we anticipate that deducing, from SMOS measurements, SSS maps at 200 km $times$ 200 km, 10 days resolution with an accuracy of 0.2 pss at a global scale is not out of reach.
Ieee Transactions On Geoscience And Remote Sensing (0196-2892) (Ieee-inst Electrical Electronics Engineers Inc), 2012-05 , Vol. 50 , N. 5 , P. 1662-1675

Droits : 2012 IEEE
http://archimer.ifremer.fr/doc/00074/18557/16108.pdf
DOI:10.1109/TGRS.2012.2184546
http://archimer.ifremer.fr/doc/00074/18557/

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
Canopy height is a key variable in tropical forest functioning and for regional carbon inventories. We investigate the spatial structure of the canopy height of a tropical forest, its relationship with environmental physical covariates, and the implication for tropical forest height variation mapping. Making use of high-resolution maps of LiDAR-derived Digital Canopy Model (DCM) and environmental covariates from a Digital Elevation Model (DEM) acquired over 30,000 ha of tropical forest in French Guiana, we first show that forest canopy height is spatially correlated up to 2500 m. Forest canopy height is significantly associated with environmental variables, but the degree of correlation varies strongly with pixel resolution. On the whole, bottomland forests generally have lower canopy heights than hillslope or hilltop forests. However, this global picture is very noisy at local scale likely because of the endogenous gap-phase forest dynamic processes. Forest canopy height has been predictively mapped across a pixel resolution going from 6 m to 384 m mimicking a low resolution case of 3 points·km −2. Results of canopy height mapping indicated that the error for spatial model with environment effects decrease from 8.7 m to 0.91 m, depending of the pixel resolution. Results suggest that, outside the calibration plots, the contribution of environment in shaping the global canopy height distribution is quite limited. This prevents accurate canopy height mapping based only on environmental information, and suggests that precise canopy height maps, for local management purposes, can only be obtained with direct LiDAR monitoring.
ISSN: 2072-4292

hal-01590726
https://hal-univ-guyane.archives-ouvertes.fr/hal-01590726
https://hal-univ-guyane.archives-ouvertes.fr/hal-01590726/document
https://hal-univ-guyane.archives-ouvertes.fr/hal-01590726/file/remotesensing-08-00747.pdf
DOI : 10.3390/rs8090747

Éditeur(s) : HAL CCSD
Résumé : The purpose of this thesis is to improve the knowledge about and apply data mining techniques and some Bayesian model in the field of social and environmental health inequalities. On the neighborhood scale on the Paris, Marseille, Lyon and Lille metropolitan areas, the health event studied is infant mortality. We try to explain its risk with socio-economic data retrieved from the national census and environmental exposures such as air pollution, noise, proximity to traffic, green spaces and industries. The thesis is composed of two parts. The data mining part details the development of a procedure of creation of multidimensional socio-economic indices and of an R package that implements it, followed by the creation of a cumulative exposure index. In this part, data mining techniques are used to synthesize information and provide composite indicators amenable for direct usage by stakeholders or in the framework of epidemiological studies. The second part is about Bayesian models. It explains the "BYM" model. This model allows to take into account the spatial dimension of the data when estimating mortality risks. In both cases, the methods are exposed and several results of their usage in the above-mentioned context are presented. We also show the value of the socio-economic index procedure, as well as the existence of social inequalities of infant mortality in the studied metropolitan areas.
Cette thèse a pour but d'améliorer les connaissances concernant les techniques d'analyse de données et certains modèles bayésiens dans le domaine de l'étude des inégalités sociales et environnementales de santé. À l'échelle géographique de l'IRIS sur les agglomérations de Paris, Marseille, Lyon et Lille, l'événement sanitaire étudié est la mortalité infantile dont on cherchera à expliquer le risque avec des données socio-économiques issues du recensement et des expositions environnementales comme la pollution de l'air, les niveaux de bruit et la proximité aux industries polluantes, au trafic automobile ou aux espaces verts. Deux volets principaux composent cette thèse. Le volet analyse de données détaille la mise au point d'une procédure de création d'indices socio-économiques multidimensionnels et la conception d'un package R l'implémentant, puis la création d'un indice de multi-expositions environnementales. Pour cela, on utilise des techniques d'analyse de données pour synthétiser l'information et fournir des indicateurs composites utilisables directement par les décideurs publics ou dans le cadre d'études épidémiologiques. Le second volet concerne les modèles bayésiens et explique le modèle " BYM ". Celui-ci permet de prendre en compte les aspects spatiaux des données et est mis en œuvre pour estimer le risque de mortalité infantile. Dans les deux cas, les méthodes sont présentées et différents résultats de leur utilisation dans le contexte ci-dessus exposés. On montre notamment l'intérêt de la procédure de création d'indices socio-économiques et de multi-expositions, ainsi que l'existence d'inégalités sociales de mortalité infantile dans les agglomérations étudiées.
https://tel.archives-ouvertes.fr/tel-00943004

tel-00943004
https://tel.archives-ouvertes.fr/tel-00943004
https://tel.archives-ouvertes.fr/tel-00943004/document
https://tel.archives-ouvertes.fr/tel-00943004/file/Manuscrit_LallouA_final.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Continuous Global Positioning System (CGPS) position time series from eastern North America constrain the pattern and magnitude of regional crustal deformation. Initial analysis delineates consistent uplift patterns, as expected from glacial isostatic adjustment (GIA) predictions, but the associated horizontal deformation is not definitive, in part due to the short time periods for a significant number of the available stations. We employ an eigenpattern decomposition in order to define a unique, finite set of deformation patterns for this continuous GPS data. Similar in nature to the empirical orthogonal functions historically employed in the analysis of atmospheric and oceanographic phenomena, the method derives the eigenvalues and eigenstates from the diagonalization of the correlation matrix using a Karhunen-Loeve expansion (KLE). The KLE technique is used to identify the important modes in both time and space for the CGPS data, modes that potentially include signals such as horizontal and vertical GIA, tectonic strain, and seasonal effects. Here we filter both the vertical and horizontal velocity patterns on different spatiotemporal scales in order to study the potential geophysical sources, after the removal of correlated and random noise. The method is successful in disaggregating the linear vertical signal from more variable and less spatially correlated signals. The vertical and horizontal results are compared to the predictions of the ICE-3G GIA loading model with a number of plausible mantle viscosity profiles. The horizontal velocity analysis allows for qualitative differentiation between several potential GIA models and suggests that, with longer time series, this technique can be employed to remove correlated noise and improve estimates of crustal strain patterns and their sources.
ISSN: 0033-4553

hal-00795454
https://hal.archives-ouvertes.fr/hal-00795454
DOI : 10.1007/s00024-011-0420-1

Éditeur(s) : HAL CCSD
Résumé : International audience
MOTIVATION: Imaging mass spectrometry (IMS) is a maturating technique of molecular imaging. Confidence in the reproducible quality of IMS data is essential for its integration into routine use. However, the predominant method for assessing quality is visual examination, a time consuming, unstandardized and non-scalable approach. So far, the problem of assessing the quality has only been marginally addressed and existing measures do not account for the spatial information of IMS data. Importantly, no approach exists for unbiased evaluation of potential quality measures. RESULTS: We propose a novel approach for evaluating potential measures by creating a gold-standard set using collective expert judgements upon which we evaluated image-based measures. To produce a gold standard, we engaged 80 IMS experts, each to rate the relative quality between 52 pairs of ion images from MALDI-TOF IMS datasets of rat brain coronal sections. Experts' optional feedback on their expertise, the task and the survey showed that (i) they had diverse backgrounds and sufficient expertise, (ii) the task was properly understood, and (iii) the survey was comprehensible. A moderate inter-rater agreement was achieved with Krippendorff's alpha of 0.5. A gold-standard set of 634 pairs of images with accompanying ratings was constructed and showed a high agreement of 0.85. Eight families of potential measures with a range of parameters and statistical descriptors, giving 143 in total, were evaluated. Both signal-to-noise and spatial chaos-based measures performed highly with a correlation of 0.7 to 0.9 with the gold standard ratings. Moreover, we showed that a composite measure with the linear coefficients (trained on the gold standard with regularized least squares optimization and lasso) showed a strong linear correlation of 0.94 and an accuracy of 0.98 in predicting which image in a pair was of higher quality. AVAILABILITY AND IMPLEMENTATION: The anonymized data collected from the survey and the Matlab source code for data processing can be found at: https://github.com/alexandrovteam/IMS_quality. CONTACT: theodore.alexandrov@embl.de
Bioinformatics (Oxford, England)

hal-01163754
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01163754
DOI : 10.1093/bioinformatics/btv266
PUBMED : 26072506

Éditeur(s) : IEEE
Résumé : Two approaches of ocean color data merging were tested and compared in the North and Equatorial Atlantic Basin: the weighted averaging and the objective analysis. The datasets used were the daily level-3 binned data of chlorophyll-a from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) and Moderate Resolution Imaging Spectroradiometer on the Aqua satellite over the year 2003, which is the first common full year of operation. Since they represent input for both approaches, matchups between the satellite and the in situ data from the SeaWiFS Bio-optical Archive and Storage System and the Atlantic Meridional Transect were first studied to compute a spatial map of the root mean-square error and of the bias. Because of the log distribution of the chlorophyll fields, each approach was applied to untransformed and log-transformed values. The application of the weighted averaging to log-transformed values does not show significant differences in comparison to its application to untransformed values. This is not the case, however, for the objective analysis that gives better results when applied to logtransformed values. Both approaches give combined chlorophyll data of equivalent quality, although the objective analysis could be improved with a better statistical characterization of noise and signal covariance. The main advantage of the objective analysis is its ability to interpolate in space (and time) by taking into account the characteristic scales of chlorophyll-a. As a result, the spatial coverage of the combined data is at least twice as large in the case of objective analysis than weighted averaging. OCR NOT CONTROLLED
IEEE (0196-2892) (IEEE), 2006-11 , Vol. 44 , N. 11 , P. 3436-3451

Droits : 2006 IEEE
http://archimer.ifremer.fr/doc/2006/publication-3631.pdf
DOI:10.1109/TGRS.2006.878441
http://archimer.ifremer.fr/doc/00000/3631/