Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction processes play a major role in plate tectonics and the subsequent geological evolution of Earth. This special issue focuses on ongoing research in subduction dynamics to a large extent (oceanic subduction, continental subduction, obduction…) for both past and active subduction zones and into mountain building processes and the early evolution of orogens. It puts together various approaches combining geophysics (imaging of subduction zones), petrology/geochemistry (metamorphic analysis of HP-UHP rocks, fluid geochemistry and magmatic signal, geochronology), seismology and geodesy (present-day evolution of subduction zones, active tectonics), structural geology (structure and evolution of mountain belts), and numerical modelling to provide a full spectrum of tools that can be used to constrain the nature and evolution of subduction processes and orogeny. Studies presented in this special issue range from the long-term (orogenic cycle) to short-term (seismic cycle).
ISSN: 0264-3707

insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985/document
https://hal-insu.archives-ouvertes.fr/insu-01287985/file/rolland-2016.pdf
DOI : 10.1016/j.jog.2016.03.006

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
We present the results of dynamic modeling of the western Mediterranean that accounts for observed global positioning system (GPS) surface deformation of the Alboran Sea and surrounding Rif and Betic Mountains as the result of the combined effects of relative motion of the Eurasian and Nubian plates, low strength in the Alboran Sea region and sub-lithospheric processes occurring beneath the External Rif domain. Assuming that the lithosphere behaves elastically over the short time period of the GPS observations, an elastic plate model is considered in our study, including an area of weak lithosphere (factor of 10) centered on the Alboran Sea and in which lateral boundary conditions consist of the Nubia-Eurasia oblique convergence. Sub-crustal processes are modeled by application of a horizontal traction on a small area (patch) at the base of the elastic plate. Our modeling studies demonstrate the need for sub-crustal or sub-lithospheric, southwestward-directed forcing to account for observed southwestward motion of the Rif and Betic domains. Based on the location, orientation, and small area of the traction patch, we hypothesize that forcing is associated with delamination and rollback of the subducted African continental lithospheric mantle beneath the External Rif zone, due to the pull of the oceanic part of the Western Mediterranean slab, a dynamic process that may be similar to that where the over-riding plate is driven toward the subduction zone during slab rollback.
ISSN: 0091-7613

hal-00524546
https://hal.archives-ouvertes.fr/hal-00524546
DOI : 10.1130/G30963.1

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : The activity of the Damavand volcano (Central Alborz, northern Iran) began 1.8 Ma ago and continued up to 7 ka BP. Although the volcanic suite is clearly of shoshonitic affinity, only two petrographic types can be distinguished in the studied lavas: (1) weakly differentiated absarokites (49 < %SiO2 < 51), scattered around the volcano but with a regional extension, (2) highly differentiated banakites (59 < %SiO2 < 63), which form the bulk of the 4,000 m thick volcanic pile. All lavas are alkalic (3.7 < %K2O < 5), REE and LILE-rich (e.g., 85 < La < 148 ppm; 9 < Th < 32 ppm) and show highly fractionated REE patterns (69 < La/Yb < 115) and pronounced Nb-Ta negative anomalies. The absarokites are characterised by Sr (0.7045-0.7046) and Nd (0.51266-0.51269) isotope compositions close to the Bulk Earth values, and distinct from those of the banakites (0.7047 < Sr-87/Sr-86 < 0.7049, 0.51258 < Nd-143/Nd-144 < 0.51262). The Pb isotope ratios are also slightly lower in the absarokites than in the banakites (18.71 < Pb-206/Pb-204 < 18.77, 15.62 < Pb-207/Pb-204 < 15.63, 38.85 < Pb-208/Pb-204 < 38.91, and 18.77 < Pb-206/Pb-204 < 18.84, 15.62 < Pb-207/Pb-204 < 15.64, 38.94 < Pb-208/Pb-204 < 39.06, respectively). Overall, there is a clear tendency towards higher Sr, Pb and lower Nd isotope ratios with increasing degree of differentiation. This study suggests that the absarokites result from a low degree of partial melting (similar to 5%) of a highly metasomatized mantle source, which inherited its characteristics from an old subduction setting. The initiation of volcanic activity 1.8 Ma ago results from variations in the lithospheric thermal regime, probably related to lithospheric delamination as proposed for Anatolia (Pearce et al. 1990). The banakites are mainly generated by extensive fractional crystallisation (similar to 70%) of the absarokitic magma, with a limited amount (a few percents) of assimilation of an old crustal component, in the form of bulk assimilation or AFC processes, which both can explain the Sr, Nd and Pb isotope data.
ISSN: 1437-3254

hal-00411553
https://hal.archives-ouvertes.fr/hal-00411553
DOI : 10.1007/s00531-006-0159-6

Éditeur(s) : Gauthier-Villars
Résumé : We report here our findings on the chemistry of methane, manganese and chloride dissolved in the interstitial water of the Barbados accretionary complex. The decollement separating the subduction plate from the accretionary wedge is geochemically characterized by high methane and manganese and low chloride concentrations relative to buried seawater. Sandstone layers occurring below the decollement and the compressive structures recording some of the earliest effects of offscraping are also characterized by similar anomalies. A fluid with the same characteristics is also found six kilometres to the east of the deformation front within the oceanic plate. High manganese concentration and low chlorinity also occur in the pore water of the offscraped sediment packages, but without associated anomalous methane concentrations. These results suggest that: Dewatering processes occur below the decollement in association with thermogenic methane production; Fluid with low chlorinity and high methane concentrations circulates mainly along the decollement, its propagation in the oceanic domain and along the main fracture zones being associated with these detachment surfaces; Diagenetic processes essentially control the dissolved manganese concentration and probably affect the methane content of the interstitial waters; The observations made in this paper illustrate advective processes in the front of an accretionary prism.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1991 , Vol. 14 , N. 1 , P. 33-49

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00101/21262/18873.pdf
http://archimer.ifremer.fr/doc/00101/21262/

Éditeur(s) : HAL CCSD Elsevier
Résumé : Primary arc melts may form through fluxed or adiabatic decompression melting in the mantle wedge, or via a combination of both processes. Major limitations to our understanding of the formation of primary arc melts stem from the fact that most arc lavas are aggregated blends of individual magma batches, further modified by differentiation processes in the sub-arc mantle lithosphere and overlying crust. Primary melt generation is thus masked by these types of second-stage processes. Magma-hosted peridotites sampled as xenoliths in subduction zone magmas are possible remnants of sub-arc mantle and magma generation processes, but are rarely sampled in active arcs. Published studies have emphasised the predominantly harzburgitic lithologies with particularly high modal orthopyroxene in these xenoliths; the former characteristic reflects the refractory nature of these materials consequent to extensive melt depletion of a lherzolitic protolith whereas the latter feature requires additional explanation.Here we present major and minor element data for pristine, mantle-derived, lava-hosted spinel-bearing harzburgite and dunite xenoliths and associated primitive melts from the active Kamchatka and Bismarck arcs. We show that these peridotite suites, and other mantle xenoliths sampled in circum-Pacific arcs, are a distinctive peridotite type not found in other tectonic settings, and are melting residues from hydrous melting of silica-enriched mantle sources. We explore the ability of experimental studies allied with mantle melting parameterisations (pMELTS, Petrolog3) to reproduce the compositions of these arc peridotites, and present a protolith (‘hybrid mantle wedge’) composition that satisfies the available constraints. The composition of peridotite xenoliths recovered from erupted arc magmas plausibly requires their formation initially via interaction of slab-derived components with refractory mantle prior to or during the formation of primary arc melts. The liquid compositions extracted from these hybrid sources are higher in normative quartz and hypersthene (i.e., they have a more silica-saturated character) in comparison with basalts derived from prior melt-depleted asthenospheric mantle beneath ridges. These primary arc melts range from silica-rich picrite to boninite and high-Mg basaltic andesite along a residual spinel harzburgite cotectic. Silica enrichment in the mantle sources of arc-related, subalkaline picrite-boninite-andesite suites coupled with the amount of water and depth of melting, are important for the formation of medium-Fe (‘calc-alkaline’) andesite-dacite-rhyolite suites, key lithologies forming the continental crust.
ISSN: 0016-7037

hal-01553520
https://hal.archives-ouvertes.fr/hal-01553520
DOI : 10.1016/j.gca.2016.09.030

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims at better deciphering the different mechanisms involved in the functioning of the subduction interplate. A 2D thermo-mechanical model is used to simulate a subduction channel, made of oceanic crust, free to evolve. Convergence at constant rate is imposed under a 100 km thick upper plate. Pseudo-brittle and non-Newtonian behaviours are modelled. The influence of the subduction channel strength, parameterized by the difference in activation energy between crust and mantle () is investigated to examine in detail the variations in depth of the subduction plane down-dip extent, . First, simulations show that numerical resolution may be responsible for an artificial and significant shallowing of if the weak crustal layer is not correctly resolved. Second, if the age of the subducting plate is 100 Myr, subduction occurs for any . The stiffer the crust is, that is, the lower is, the shallower is (60 km depth if kJ/mol) and the hotter the fore-arc base is. Conversely, imposing a very weak subduction channel ( J/mol) leads there to an extreme mantle wedge cooling and inhibits mantle melting in wet conditions. Partial kinematic coupling at the fore-arc base occurs if kJ/mol. If the incoming plate is 20 Myr old, subduction can occur under the conditions that the crust is either stiff and denser than the mantle, or weak and buoyant. In the latter condition, cold crust plumes rise from the subduction channel and ascend through the upper lithosphere, triggering (1) partial kinematic coupling under the fore-arc, (2) fore-arc lithosphere cooling, and (3) partial or complete hindrance of wet mantle melting. then ranges from 50 to more than 250 km depth and is time-dependent if crust plumes form. Finally, subduction plane dynamics is intimately linked to the regime of subduction-induced corner flow. Two different intervals of are underlined: 80–120 kJ/mol to reproduce the range of slab surface temperature inferred from geothermometry, and 10–40 kJ/mol to reproduce the shallow hot mantle wedge core inferred from conditions of last equilibration of near-primary arc magmas and seismic tomographies. Therefore, an extra process controlling mantle wedge dynamics is needed to satisfy simultaneously the aforementioned observations. A mantle viscosity reduction, by a factor 4–20, caused by metasomatism in the mantle wedge is proposed. From these results, I conclude that the subduction channel down-dip extent, , should depend on the subduction setting, to be consistent with the observed variability of sub-arc depths of the subducting plate surface.
ISSN: 0031-9201

hal-01623155
https://hal.archives-ouvertes.fr/hal-01623155
DOI : 10.1016/j.pepi.2017.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cerro del Almirez massif (Nevado–Filábride Complex, Betic Cordillera, SE Spain) is composed of antigorite (Atg-) serpentinite and chlorite (Chl-) harzburgite separated by a thin reaction front formed in a palaeo-subduction setting. These ultramafic rocks preserve unique prograde structures related to the pre- and peak high-pressure event (1.6–1.9 GPa and 680–710 °C). The oldest subduction-related structures are preserved in Atg-serpentinites: a penetrative S1 foliation and associated L1 stretching lineation that formed in a non-coaxial regime with a top-to-the-W sense of shear. This planar–linear fabric is crosscut by olivine ± Ti-clinohumite veins, formed during the prograde breakdown of brucite and pre-metamorphic clinopyroxene, which form a system of veins decimetres long. They record embrittlement processes due to the release of 6 vol.% of H2O associated with brucite dehydration. The growth of prograde olivine and/or tremolite porphyroblasts is syn- to post-kinematic in relation to the S1 foliation. Further reactions at higher temperature related to the complete breakdown of the Atg (i.e. Atg-out) are post-kinematic to S1. Prograde Chl-harzburgite is crosscut by sets of conjugate zones associated with grain-size reduction of olivine grains. These grain-size reduction zones are interpreted as brittle structures generated by hydrofracturing due to overpressure fluids in a compressional setting at low-differential stresses.Structures related to the exhumation process are mainly preserved in the metasedimentary host rock, where an S2/L2 planar–linear fabric developed within a shear zone dominated by a non-coaxial regime with a top-to-the-W sense of movement in a transpressional regime. Peak metamorphic conditions deduced for the schists are similar in pressure (1.3–1.9 GPa) but lower in temperature (560–590 °C) compared to the ultramafic rocks in contact with them, suggesting a major shear zone at the base of the ultramafic massif during D2 deformation in a right-handed transpressional regime.
ISSN: 0040-1951

hal-01172303
https://hal.archives-ouvertes.fr/hal-01172303
DOI : 10.1016/j.tecto.2014.12.022

Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : International audience
This paper presents a synthetic view of the geodynamic evolution of the Zagros orogen within the frame of the Arabia-Eurasia collision. The Zagros orogen and the Iranian plateau preserve a record of the long-standing convergence history between Eurasia and Arabia across the Neo-Tethys, from subduction/obduction processes to present-day collision (from ~ 150 to 0 Ma). We herein combine the results obtained on several geodynamic issues, namely the location of the oceanic suture zone, the age of oceanic closure and collision, the magmatic and geochemical evolution of the Eurasian upper plate during convergence (as testified by the successive Sanandaj-Sirjan, Kermanshah and Urumieh-Dokhtar magmatic arcs), the P-T-t history of the few Zagros blueschists, the convergence characteristics across the Neo-Tethys (kinematic velocities, tomographic constraints, subduction zones and obduction processes), together with a survey of recent results gathered by others. We provide lithospheric-scale reconstructions of the Zagros orogen from ~ 150 to 0 Ma across two SW-NE transects. The evolution of the Zagros orogen is also compared to those of the nearby Turkish and Himalayan orogens. In our geotectonic scenario for the Zagros convergence, we outline three main periods/regimes: (1) the Mid to Late Cretaceous (115-85 Ma) corresponds to a distinctive period of perturbation of subduction processes and interplate mechanical coupling marked by blueschist exhumation and upper-plate fragmentation, (2) the Paleocene-Eocene (60-40 Ma) witnesses slab break-off, major shifts in arc magmatism and distributed extension within the upper plate, and (3) from the Oligocene onwards (~ 30-0 Ma), collision develops with a progressive SW migration of deformation and topographic build-up (Sanandaj-Sirjan Zone: 20-15 Ma, High Zagros: ~12-8 Ma; Simply Folded Belt: 5-0 Ma) and with partial slab tear at depths (~10 Ma to present). Our reconstructions underline the key role played by subduction throughout the whole convergence history. We finally stress that such a long-lasting subduction system with changing boundary conditions also makes the Zagros orogen an ideal natural laboratory for subduction processes.
ISSN: 0016-7568

insu-00616582
https://hal-insu.archives-ouvertes.fr/insu-00616582
https://hal-insu.archives-ouvertes.fr/insu-00616582/document
https://hal-insu.archives-ouvertes.fr/insu-00616582/file/692.full.pdf
DOI : 10.1017/S001675681100046X

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The mantle above a subducting slab is the site of complex interactions between deformation, partial melting, fluid migration and magma transport. To constrain these interactions and their effects on olivine deformation, we analyze microstructures, crystal preferred orientations, and water contents of peridotite xenoliths entrained by andesites of the Avacha volcano, southern Kamchatka arc. These xenoliths are refractory spinel harzburgites that have coarse-grained microstructures with widely spaced subgrain boundaries and sinuous grain boundaries in olivine, consistent with deformation by dislocation creep under low deviatoric stress (< 13 MPa) and with a significant contribution from diffusional processes. Analysis of crystal preferred orientations (CPO) indicates dominant activation of high-temperature, low-stress {0kl}[100] slip systems in olivine and of(100)[001] in orthopyroxene. In most samples, coarse opx crystals, elongated parallel to the lineation, enclose small olivine grains in crystallographic continuity with neighbouring crystals, indicating crystallization of orthopyroxene at the expense of olivine as a result of reactive percolation of Si-rich fluids coeval with the high-temperature deformation. Secondary crystallization of interstitial orthopyroxene led locally to development of opx-rich lenses parallel to the foliation, characterized by a decrease in olivine grain size and dispersion of the olivine CPO without changing the dominant slip systems. Half of the samples also show acicular orthopyroxene aggregates with which is associated a fine-grained matrix composed of rounded strain-free olivine, orthopyroxene, spinel, and rare amphibole crystals. This matrix occurs pervasively along grain boundaries or forms millimeter-scale irregular lenses and anastomosing veinlets that crosscut the coarse crystals and their ductile deformation structures. Both acicular orthopyroxene and the fine-grained matrix are interpreted as resulting from reactive transport of H2O-rich fluids under static conditions, probably in the lithospheric mantle. Infrared analyses show that olivine contains 1-8 center dot 6 ppm by weight of water. These low water contents are similar to those observed in spinel peridotites from other subduction zones and probably record both the low solubility of water in olivine at low pressure and dehydration during exhumation of the xenoliths. Water contents in orthopyroxene are highly variable (25-506 ppm H2O), probably recording spatially heterogeneous interaction with fluids or melts and compositional disequilibrium in the studied samples. Change in the dominant percolation mechanism from porous flow to fracturing suggests cooling, consistent with the low temperatures estimated from pyroxene thermometry (< 800-900 degrees C). The Avacha xenoliths therefore record pervasive deformation of a region of the mantle under asthenospheric conditions, followed by its accretion to the base of the lithosphere, probably as a result of cooling of the mantle wedge. Percolation of Si-rich fluids or hydrous melts is recorded at all stages; this probably enhanced diffusion and lowered deviatoric stresses during ductile deformation, but did not change the dominant slip direction in olivine from [100] to [001].
ISSN: 0022-3530

hal-00456053
https://hal.archives-ouvertes.fr/hal-00456053
DOI : 10.1093/petrology/egp085

Éditeur(s) : HAL CCSD
Résumé : Subduction is one of the major geodynamical process active during the Earth evolution. The characterization of arc magmas, their evolution through space and time, and the relationship between arc magmatism and continental crust forming processes, constitute the main research topics in petrology and geochemistry since the last three decades. This study focuses on an exhumed portion of the Kohistan Arc (N Pakistan), which is an exceptional ‘in situ' laboratory to study and follow through time the processes active on subduction zones. Based on a pluri-geochemical approach, this study allows unraveling two major issues : 1/ The lack of a cogenetic relationship between the arc root (i.e. ultramafic rocks) and the overlying gabbroic crustal section. The Jijal ultramafic section does not bear a crustal origin and was emplaced at ~117 Ma via a magma-rock reaction between REE-depleted ‘boninite-like' melts and the pre-existing lithospheric mantle with Indian-MORB affinities; 2/ A three-stage geodynamical model covering the arc evolution through ~30 Ma. This model starts with the onset of the subduction followed by the building of the volcanic arc (1st stage). The 2nd stage corresponds to a major thermal event, characterized by abundant magma underplating and by granulitisation of the arc base. Recycling of the residual/cumulative lower crust into the convective asthenospheric mantle was efficient during this stage, and probably related to thermo-mechanical erosion processes. The last stage, between ~95 and 85 Ma, seals the end of the intra-oceanic subduction and corresponds to an “amagmatic” period. This step is followed by a voluminous, but short, magmatic pulse at ~85 Ma, occurring just before the arc-continent collision. At last, this study emphasizes the more mafic composition of the investigated crustal arc section when compared to the bulk continental crust. Nevertheless the arc section composition nicely fits with the lower continental crust average.
Les zones de subduction représentent des zones d'évolution clés dans la compréhension des processus géologiques majeurs actifs sur notre planète. En particulier, la caractérisation et l'évolution des magmas générés dans les zones d'arcs océaniques et la relation entre leur genèse et les processus de croissance crustale sont des axes primordiaux. Cette étude est focalisée sur la portion d'arc océanique exhumée du Kohistan (Nord Pakistan) qui constitue un laboratoire exceptionnel pour appréhender cette problématique. Basée sur une approche géochimique multi-méthodes (éléments majeurs et en trace, isotopes), cette étude a permis d'établir : 1/ l'absence de relation génétique directe entre les roches ultrabasiques de la racine de l'arc et la section crustale sus-jacente. La formation de la séquence ultrabasique de Jijal se produit à ~117 Ma via une réaction de type magma-roche entre des liquides de type boninitique (appauvris en terres rares), et le manteau lithosphérique de type MORB-Indien ; 2/ un modèle géodynamique en trois stades majeurs résumant l'évolution de l'arc océanique et de la subduction sur une période d'environ 30 Ma. Ce modèle débute par l'initiation de la subduction et la formation de l'arc volcanique s.s. (1er stade) ; le 2ème stade correspond à un évènement thermique majeur. Il est représenté par un sous-placage important de magmas et une granulitisation intense de la base de l'arc. Le recyclage de la croûte inférieure cumulative et résiduelle, dans le manteau sous-jacent, se produit durant cette étape vraisemblablement suite à des processus d'érosion thermo-mécanique. Le dernier stade, entre 95 Ma et 85 Ma, scelle la fin du fonctionnement de la zone de subduction et correspond à une période amagmatique suivie par une brève reprise du magmatisme avant la collision de l'arc après 85 Ma. Enfin, une modélisation numérique comparative avec la croûte continentale globale met en évidence la composition significativement plus basique de la croûte de l'arc insulaire du Kohistan. De fortes similitudes sont en revanche observées entre la section d'arc étudiée et la croûte continentale inférieure.
https://tel.archives-ouvertes.fr/tel-00437770

tel-00437770
https://tel.archives-ouvertes.fr/tel-00437770
https://tel.archives-ouvertes.fr/tel-00437770/document
https://tel.archives-ouvertes.fr/tel-00437770/file/thesedhuime.pdf

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Physical modeling of oblique subduction is performed to study the mechanism of strain partitioning. The model is two-layer and includes the elasto-plastic lithosphere (the overriding and subducting plates) and the low-viscosity liquid asthenosphere. The subduction is driven by a push force from a piston and a pull force when the density contrast Ap between the subducting plate and the asthenosphere is positive. We vary both Ap and the interplate friction (frictional stresses). Slip partitioning is obtained only in the models with high interplate friction and only when the overriding plate contains a weak zone. This zone in the models corresponds either to locally thinned litho-sphere or to cut (fault). The horizontal, trench-normal component of the interplate friction force [Ffh[ can be comparable with the absolute value of the horizontal component of the nonhydrostatic interplate pressure force [Fph [ in the subduction zone. Ffh is always negative (compression), while Fph can be either negative (compressional subduction regime) or positive (extensional regime). High friction, which promotes partitioning, can completely cancel the extensional (suction) force Fph. Back arc tension and strike-slip faulting appear thus as conflicting processes, although they can coexist in the same subduction zone, depending on the relative values of relevant forces. It appears that high friction can exist only in compressional subduction zones where partitioning should develop more easily. This conclusion is supported by the comparison of two oblique subduction zones, having similar geometry: the compressional southern Kurile zone (strong partitioning) and extensional southern Ryukyu zone (no lithospheric-scale partitioning). Other factors controlling the strain partitioning are the length of the oblique subductlon zone, the boundary conditions at the transverse limits of the forearc sliver, and of course, the obliquity of subduction.
ISSN: 2169-9275

hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396/document
https://hal.archives-ouvertes.fr/hal-01261396/file/chemendaJGR2000.pdf
DOI : 10.1029/1999JB900332

Éditeur(s) : HAL CCSD
Résumé : International audience
High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. The question of their exhumation is nevertheless still unclear. The Aegean domain offers several HP-LT belts. Especially, the Attic-Cycladic Blueschist unit (ACBU) is an example of a HP-LT unit exhumed in a convergent and then in a divergent context. It actually appears in metamorphic core complexes (MCCs) formed in the back-arc of the subduction. The syn-convergence "message" is however difficult to read because of the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation remain unclear. We investigate theses questions with metamorphic petrology (Andros and Ios islands) and phengite population, single grain and in situ 40Ar-39Ar geochronology (Andros, Tinos, Syros and Ios islands). Based on these new constraints and a synthesis of published data, we are able to refine the geometry, the timing and the modes of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in the age and P-T conditions at the successive stages of syn-orogenic exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a basal thrust and a summital detachment. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. The change in boundary conditions is recorded by slowing of the exhumation and isobare heating. The conditions of post-orogenic exhumation differ from an island to another. The onset of post-orogenic exhumation is dated around 30 Ma in the northern Cyclades and 25 Ma in the southern Cyclades. It is related to top-to-the-North deformation in all the studied domain. The end of ductile deformation below the detachments is also diachronous (21 Ma in the North and 18 Ma in the South). Finally, we propose a model for the final steps of the exhumation related to the intrusion of granitic bodies around 14 Ma.
American Geophysical Union, Fall Meeting
San Francisco, United States

insu-00860510
https://hal-insu.archives-ouvertes.fr/insu-00860510
BIBCODE : 2010AGUFM.T23C2301L

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Based on observations from both modem convergent margins and sandbox modeling, we examine the possible conditions favoring frontal accretion and/or frontal and basal tectonic erosion. Mean characteristic parameters (!.t, !.t* • and [) are used to discuss the mechanical stability of 28 transects across the frontal part of convergent margins where the Coulomb theory is applicable. Natural observations reveal that "typical accretionary wedges" are characterized by low tapers with smooth surface slope and subducting plate, low convergence rates and thick trench sediment, while "nonaccretionary wedges" display large tapers with irregular surface slopes and rough subducting plate, high convergence rates and almost no trench fill. Sandbox experiments were performed to illustrate the effects of seamounts/ridges in the subduction zone on the deformation of an accretionary wedge. These experiments show that a wedge of sand is first trapped and pushed in front of the seamount which acts as a moving bulldozer. This is followed by a tunnelling effect of the subducting seamount through the frontal wedge material, which results in considerable sand reworking. At an advanced subduction stage, the d6collement jumps back from a high level in the wedge to its former basal position. We conclude that a high trench sedimentation rate relative to the convergence rate leads to frontal accretion. In contrast, several conditions may favor tectonic erosion of the upper plate. First, oceanic features, such as grabens, seamounts or ridges, may trap upper plate material during their subduction process. Second, destabilization of the upper plate material by internal fluid overpressuring causing hydrofracturing is probably another important mechanism.
ISSN: 0148-0227

hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600/document
https://hal.archives-ouvertes.fr/hal-01261600/file/lallemandJGR1994.pdf

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : In Vietnam, the Triassic Indosinian collision affected coevally the Truong Son belt and the Kontum Massif,which were not independent tectonic units, but parts of the same Gondwana-derived Indochina continental block. This thermotectonic event took place synchronously throughout Vietnam, during the Lower Triassic 250-240-Ma time interval, as demonstrated by numerous geochronological data, combining Ar-Ar and U-Pb dating methods. Structural and kinematic investigations, in the Indosinian metamorphic rocks, reveal that the collisional process resulted from a consistent northwest-striking convergence of Indochina with respect to the adjacent blocks. It is suggested that this motion was taken up by a pair of opposite subduction zones: to the north, beneath South China, and to the west, beneath western Indochina, along the Song Ma and Po Ko sutures, respectively. Tectonic markers, calc-alkaline subduction-related volcanism and granitic intrusions and the generation of high-pressure rocks that have been recently discovered support this geodynamic setting, at least along Po Ko. Along the northwest-trending Song Ma zone, the obliquity of the convergence during subduction and subsequent collision resulted in the development, within the Truong Son Belt, of a set of subparallel dextral mylonitic shear zones, under amphibolite-facies metamorphism. The intermediate segments remained weakly metamorphic or even almost devoid of metamorphism. Along Po Ko, the convergence was near-orthogonal, with a left-lateral strike-slip component; the ongoing continental subduction resulted in the reworking of the Kontum granulitic basement and the development of Indosinian HP granulitic conditions; the subsequent extension-related exhumation operated approximately in the same northwestwards direction. This Indosinian evolution, applied on a continental crust that had been probably affected, as in South China, by a Caledonian-related event, as judged by the general unconformity of the Lower Devonian sediments, the widespread occurrence of magmatic crystallisation ages of ca 450 Ma (Ordovician-Silurian), and by the approximately similar age of the primary granulitic episode in the Kontum Massif. The similarities of the Devonian facies over central, northern Vietnam and South China imply a land connection, possibly as a consequence of a Caledonian collision along Song Ma, but this does not preclude a further oceanic opening and a closure during the Indosinian.
ISSN: 1631-0713

hal-00411591
https://hal.archives-ouvertes.fr/hal-00411591
DOI : 10.1016/j.crte.2007.10.005

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
We show here that the Amalaoulaou complex, in the Pan-African belt of West Africa (Gourma, Mali), corresponds to the lower and middle sections of a Neoproterozoic intra-oceanic arc. This complex records a 90-130-Ma-long evolution of magmatic inputs and differentiation above a subducting oceanic slab. Early c. 793 Ma-old metagabbros crystallised at lower crustal or uppermost mantle depths (25-30 km) and have geochemical characteristic of high-alumina basalts extracted from a depleted mantle source slightly enriched by slab-derived sedimentary components ((La/Sm)(N) < 1; epsilon(Nd): +5.4-6.2; Sr-87/Sr-86: 0.7027-0.7029). In response to crustal thickening, these mafic rocks were recrystallised into garnet-granulites (850-1,000A degrees C; 10-12 kbar) and subject to local dehydration-melting reactions, forming trondhjemititic leucosomes with garnet-clinopyroxene-rutile residues. Slightly after the granulitic event, the arc root was subject to strong HT shearing during partial exhumation (detachment faults/rifting or thrusting), coeval with the emplacement of spinel- and garnet-pyroxenite dykes crystallised from a high-Mg andesitic parental magma. Quartz and hornblende-gabbros (700-660 Ma) with composition typical of hydrous volcanic rocks from mature arcs ((La/Sm)(N): 0.9-1.8; epsilon(Nd): +4.6 to +5.2; Sr-87/Sr-86: 0.7028-0.7031) were subsequently emplaced at mid-arc crust levels (similar to 15 km). Trace element and isotopic data indicate that magmas tapped a depleted mantle source significantly more enriched in oceanic sedimentary components (0.2%). Exhumation occurred either in two stages (700-660 and 623 Ma) or in one stage (623 Ma) with a final exhumation of the arc root along cold P-T path (550A degrees C, 6-9 kbar; epidote-amphibolite and greenschist facies conditions) during the main Pan-African collision event (620-580 Ma). The composition of magmas forming the Cryogenian Amalaoulaou arc and the processes leading to intra-arc differentiation are strikingly comparable to those observed in the deep section of exposed Mezosoic oceanic arcs, namely the Kohistan and Talkeetna complex. This evolution of the Amalaoulaou oceanic arc and its accretion towards the West African craton belong to the life and closure of the Pharusian Ocean that eventually led to the formation of the Greater Gondwana supercontinent, a similar story having occurred on the other side of the Sahara with the Mozambique Ocean.
ISSN: 0010-7999

hal-00639447
https://hal.archives-ouvertes.fr/hal-00639447
DOI : 10.1007/s00410-011-0624-5

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
An active seismic experiment has been conducted across the southern Ryukyu margin east of Taiwan over the whole trench-arc-backarc system in May 2009. Twenty-four ocean bottom seismometers (OBS) were deployed from the Ryukyu trench to the southern Okinawa trough over the Ryukyu arc and forearc. Wide angle seismic data were recorded by the OBS array while coincident reflection seismic data were acquired using a 6 km long streamer and a 6600 cubic inch seismic airgun array. Results from tomographic inversion of 21091 travel time picks along this line allowed us to image crustal structures of the Ryukyu margin down to a depth of 25 km. The transect has been designed to provide a better seismic velocity structure of the subduction zone in a highly deformed area that has produced an M8 earthquake in 1920. The line crosses a seismic cluster of earthquakes which source mechanisms are still poorly understood. The subducting oceanic crust of the Huatung Basin is about 5-6 km thick. The underlying mantle exhibits low seismic velocities around 7.8 km/s suggesting some hydrothermal alterations or alteration of the upper mantle through faults generated by the flexure of the subducting plate as it enters the subduction. Low velocities, up to 4.5 km/s, associated with the accretionary wedge are well imaged from the trench back to the Nanao forearc. A major result concerns the abrupt termination of the buttress at the rear of the accretionary wedge. Despite the low resolution of the tomographic inversion near the subduction interface, several lines of evidence supporting the presence of a low velocity zone beneath the toe of the forearc buttress could be established. The Moho beneath the Ryukyu non-volcanic arc is located at a depth around 25 km depth.
ISSN: 0040-1951

hal-00795573
https://hal.archives-ouvertes.fr/hal-00795573
DOI : 10.1016/j.tecto.2011.10.010

Éditeur(s) : HAL CCSD
Résumé : Volatile-rich, silica-undersaturated alkaline lavas record the important role of fluids during fluid-rock and magma-rock interactions in the mantle, which are key processes to understand the dynamics of the convective mantle and lithosphere-asthenosphere interactions in intracontinental settings. The aim of this thesis is to bring new constraints on the genesis of alkaline magmas by characterizing the crystallization conditions, the source and the partial melting processes taking part in the genesis of olivine nephelinites, pyroxene nephelinites and basanites from the Jbel Saghro volcanic field in the Moroccan Anti Atlas.The petrological and geochemical study of rocks and minerals coupled with the analysis of fluid inclusions constrains the pre-eruptive conditions of Saghro nephelinites to 1.7–2.2 GPa and ~1350 °C. Minerals show that nephelinitic magmas are rich in volatile elements (Cl, F, S), and fluid inclusions indicate that magmas were saturated with a CO2-rich fluid at pressures > 590 MPa. The various mineralogical assemblages and the presence of peridotite xenoliths suggest a rapid ascent for olivine nephelinites and more complex processes at depth for pyroxene nephelinites.Fractional crystallization and partial melting modelling of Saghro mafic lavas indicate that they are low-degree melts (0.6–2.5 %) of an amphibole-bearing carbonated peridotite enriched in incompatible elements, at the garnet-spinel transition (~80–85 km). Saghro nephelinites display a temporal evolution with a slight increase of the degree of melting and a decrease of the amount of residual amphibole from the oldest (olivine nephelinites, 9.6 Ma) to the most recent (pyroxene nephelinites, 2.9 Ma). Basanites form a system that is independent from nephelinites and are slightly higher-degree melts. Important variations in their chemical composition suggest variable amounts of fractional crystallization during ascent.The peculiar characteristics of Saghro nephelinites and basanites (enrichment in incompatible elements, negative anomalies in K, Zr, Hf and Ti, high Ca/Al and Zr/Hf ratios) indicate that their source was affected by carbonatitic metasomatism. The influence of this metasomatism is stronger for pyroxene nephelinites than for olivine nephelinites. These results suggest fluid-rock interactions beneath the Northwest African Craton, leading to the formation of a metasomatized mantle by CO2-rich carbonatitic components at the lithosphere-asthenosphere transition. The origin of the metasomatism inducing source enrichment and the formation of amphibole veins could be attributed to the melting of relict subducted oceanic lithosphere. The relatively low melting temperatures (< 1350 °C) suggest the absence of a thermal anomaly beneath the Jbel Saghro, and thus support a lithosphere delamination model as precursor of Saghro volca0,3nism. However, the increasing degree of partial melting over time, also observed in the Middle Atlas, together with the isotopic and geochemical similarities with Canary Islands alkaline lavas does not allow us to discard the influence of a deviation of the Canary mantle plume beneath northwest Africa.
Les laves alcalines sous-saturées riches en éléments volatils sont les marqueurs du rôle important des fluides dans le manteau et des interactions fluide-roche et magma-roche, processus clés pour comprendre la dynamique du manteau convectif et les interactions asthénosphère-lithosphère en domaine intracontinental. L’objectif de cette thèse est d’apporter de nouvelles contraintes sur la genèse des magmas alcalins en caractérisant les conditions de cristallisation, la source et les processus de fusion partielle à l’origine des néphélinites à olivine, des néphélinites à pyroxène et des basanites du champ volcanique du Jbel Saghro dans l’Anti-Atlas marocain.L’étude pétrologique et géochimique des roches et des minéraux, couplée à l’analyse des inclusions fluides a permis de contraindre les conditions pré-éruptives des néphélinites de Saghro à 1.7–2.2 GPa et ~1350 °C. Les minéraux montrent que les magmas néphélinitiques sont riches en éléments volatils (Cl, F, S), et les inclusions fluides indiquent que les magmas étaient saturés en fluide riche en CO2 à des pressions > 590 MPa. Les différents assemblages minéralogiques des néphélinites et la présence de xénolites péridotitiques suggèrent une ascension rapide des néphélinites à olivine et des processus plus complexes en profondeur pour les néphélinites à pyroxène.La modélisation des processus de cristallisation fractionnée et de fusion partielle des laves mafiques de Saghro a permis de déterminer qu’elles sont issues de faibles taux de fusion partielle (0.6–2.5 %) d’une péridotite carbonatée enrichie en éléments incompatibles, au niveau de la transition grenat–spinelle (~80–85 km) et en présence d’amphibole. Les néphélinites de Saghro montrent une évolution temporelle avec une légère augmentation du taux de fusion et une diminution de la quantité d’amphibole au résidu des plus anciennes (néphélinites à olivine, 9.6 Ma) aux plus récentes (néphélinites à pyroxène, 2.9 Ma). Les basanites forment un système indépendant des néphélinites et sont issues de taux de fusion plus élevés. Les fortes variations dans leur composition chimique suggèrent qu’elles ont subi de la cristallisation fractionnée lors de leur ascension.Les caractéristiques particulières des néphélinites et basanites de Saghro (enrichissement en éléments incompatibles, anomalies négatives en K, Zr, Hf et Ti, rapports Ca/Al et Zr/Hf élevés) indiquent que leur source a subi un métasomatisme principalement carbonatitique. L’influence de ce métasomatisme est plus forte pour les néphélinites à pyroxène que pour les néphélinites à olivine, impliquant une évolution temporelle de l’intensité du métasomatisme. Ces résultats suggèrent des interactions fluide-roche sous le craton Nord-Ouest Africain, entraînant la formation d'un manteau métasomatisé par des composants carbonatitiques riches en CO2 au niveau de la transition lithosphère-asthénosphère. L’origine du métasomatisme provoquant l’enrichissement de la source et la formation de veines d’amphibole pourrait être liée à la fusion de reliquats de croûte océanique subductée. Les températures de fusion relativement faibles (< 1350 °C) suggèrent l’absence d’anomalie thermique sous le Jbel Saghro, et favorisent donc un modèle de délamination de la lithosphère comme initiateur du volcanisme. Cependant, l’augmentation du taux de fusion partielle au cours du temps, également observée dans le Moyen Atlas, et les similitudes isotopiques et géochimiques avec les laves alcalines des îles Canaries ne permettent pas d’exclure une influence du panache des Canaries sur la source du volcanisme alcalin du Jbel Saghro.
https://tel.archives-ouvertes.fr/tel-01615888

NNT : 2015MONTS070
tel-01615888
https://tel.archives-ouvertes.fr/tel-01615888
https://tel.archives-ouvertes.fr/tel-01615888/document
https://tel.archives-ouvertes.fr/tel-01615888/file/53752_CHAMBOREDON_2015_archivage_cor.pdf

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
[1] Statistical analysis of modern oceanic subduction zone parameters, such as the age of a downgoing plate or the absolute plate motions, is performed in order to investigate which parameter controls the dip of a slab and, conversely, what the influence of slab geometry is on upper plate behavior. For that purpose, parameters have been determined from global databases along 159 transects from all subduction zones that are not perturbed by nearby collision or ridge/plateau/seamount subduction. On the basis of tomographic images, slabs that penetrate through, or lie on, the 670 km discontinuity are also identified. The results of the statistical analysis are as follows: (1) Back-arc stress correlates with slab dip, i.e., back-arc spreading is observed for deep dips (deeper than 125 km) larger than 50°, whereas back-arc shortening occurs only for deep dips less than 30°. (2) Slab dip correlates with absolute motion of the overriding plate. The correlation is even better when the slab lies on, or even more penetrates through, the 670 km discontinuity. (3) Slabs dip more steeply, by about 20° on average, beneath oceanic overriding plates than beneath continental ones. (4) Slabs dip more steeply on average by about 10° near edges. (5) Slab dip does not correlate with the magnitude of slab pull, the age of subducting lithosphere at the trench, the thermal regime of the subducting lithosphere, the convergence rate, or the subduction polarity (east versus west). The present study provides evidence that the upper plate absolute motion plays an important role on slab dip, as well as on upper plate strain. Retreating overriding plates are often oceanic ones and thus may partially explain the steeper slab dips beneath oceanic upper plates. One can infer that low slab dips correlate well with compression in continental advancing upper plates, whereas steep dips are often associated with extension in oceanic retreating upper plates. Excess weight of old slabs is often counterbalanced by other forces, probably asthenospheric in origin, such as lateral mantle flow near slab edges or anchor forces, to determine slab dip. Components: 12,676 words, 13 figures, 1 table.
ISSN: 1525-2027

hal-01261567
https://hal.archives-ouvertes.fr/hal-01261567
https://hal.archives-ouvertes.fr/hal-01261567/document
https://hal.archives-ouvertes.fr/hal-01261567/file/lallemandG32005.pdf
DOI : 10.1029/2005GC000917

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A variety of atypical plume-like structures and focused upwellings that are not rooted in the lower mantle have recently been discussed, and seismological imaging has shown ubiquitous small-scale convection in the uppermost mantle in regions such as the Mediterranean region, the western US, and around the western Pacific. We argue that the three-dimensional return flow and slab fragmentation associated with complex oceanic subduction trajectories within the upper mantle can generate focused upwellings and that these may play a significant role in regional tectonics. The testable surface expressions of this process are the outside-arc alkaline volcanism, topographic swell, and low-velocity seismic anomalies associated with partial melt. Using three-dimensional, simplified numerical subduction models, we show that focused upwellings can be generated both ahead of the slab in the back-arc region (though -five times further inward from the trench than arc-volcanism) and around the lateral edges of the slab (in the order of 100 km away from slab edges). Vertical mass transport, and by inference the associated decompression melting, in these regions appears strongly correlated with the interplay between relative trench motion and subduction velocities. The upward flux of material from the depths is expected to be most pronounced during the first phase of slab descent into the upper mantle or during slab fragmentation. We discuss representative case histories from the Pacific and the Mediterranean where we find possible evidence for such slab-related volcanism.
ISSN: 0012-821X

hal-00553075
https://hal.archives-ouvertes.fr/hal-00553075
DOI : 10.1016/j.epsl.2010.08.012