Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : In this paper we present the potential of a new compact superconducting gravimeter (GWR iGrav) designed for groundwater monitoring. At first, 3 yr of continuous gravity data are evaluated and the performance of the instrument is investigated. With repeated absolute gravity measurements using a Micro-g Lacoste FG5, the calibration factor (−894.8 nm s−2 V−1) and the long-term drift of this instrument (45 nm s−2 yr−1) are estimated for the first time with a high precision and found to be respectively constant and linear for this particular iGrav. The low noise level performance is found similar to those of previous superconducting gravimeters and leads to gravity residuals coherent with local hydrology. The iGrav is located in a fully instrumented hydrogeophysical observatory on the Durzon karstic basin (Larzac plateau, south of France). Rain gauges and a flux tower (evapo-transpiration measurements) are used to evaluate the groundwater mass balance at the local scale. Water mass balance demonstrates that the karst is only capacitive: all the rainwater is temporarily stored in the matrix and fast transfers to the spring through fractures are insignificant in this area. Moreover, the upper part of the karst around the observatory appears to be representative of slow transfer of the whole catchment. Indeed, slow transfer estimated on the site fully supports the low-flow discharge at the only spring which represents all groundwater outflows from the catchment. In the last part of the paper, reservoir models are used to characterize the water transfer and storage processes. Particular highlights are done on the advantages of continuous gravity data (compared to repeated campaigns) and on the importance of local accurate meteorological data to limit misinterpretation of the gravity observations. The results are complementary with previous studies at the basin scale and show a clear potential for continuous gravity time-series assimilation in hydrological simulations, even on heterogeneous karstic systems.
ISSN: 0956-540X

hal-01526965
https://hal.archives-ouvertes.fr/hal-01526965
https://hal.archives-ouvertes.fr/hal-01526965/document
https://hal.archives-ouvertes.fr/hal-01526965/file/fores2016.pdf
DOI : 10.1093/gji/ggw396

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Clostridium difficile infection (CDI) is the primary cause of nosocomial diarrhoea in industrialised countries, usually occurring as a complication of antibiotic therapy in elderly patients. Landmark events contributed to boosting interest in CDI over the last 10 years, including the emergence of unusually severe and recurrent CDI due to the NAP1/BI/027 strain, as well as reports suggesting that CDI is also significantly encountered in patients previously considered at no risk, such as community-acquired CDI in patients with no recent antibiotic use, or CDI during pregnancy. Despite this growing interest from the medical community, we do not know the real dimensions of the disease for the following reasons: (i) despite comprehensive guidelines published in Europe and in the USA, most laboratories still use diagnostic tests with suboptimal sensitivity as a 'rule-out' test, hence a significant proportion of CDIs remain undiagnosed; (ii) use of PCR as a stand-alone test by others will probably overestimate the real incidence of CDI and jeopardise any comparison between institutions with different diagnostic procedures; and (iii) transversal studies, with optimum design and diagnostic tests, are rapidly outdated due to the dramatic changes in CDI epidemiology that may occur from one year to another. To get an accurate picture of the real dimensions of the CDI issue, we need more systematic use of an adequate and homogeneous diagnostic strategy in the field as well as the implementation of continuous monitoring of CDI incidence through surveillance programmes.
ISSN: 0924-8579

inserm-00863350
http://www.hal.inserm.fr/inserm-00863350
http://www.hal.inserm.fr/inserm-00863350/document
http://www.hal.inserm.fr/inserm-00863350/file/Clostridium_difficile_infections._Do_we_know_the_real_dimensionssur the_problem-accepted.pdf
DOI : 10.1016/j.ijantimicag.2013.04.009

Éditeur(s) : HAL CCSD
Résumé : International audience
The influence of Mn solute atoms on sub-grain boundary mobilities in Al has been determined by accurate electron backscatter diffraction analysis of the sub-grain sizes and misorientations during recovery annealing. High purity Al-0.1 and 0.3 wt.% Mn alloys were deformed by plane strain compression at room temperature to equivalent strains of 1.8 and annealed in the temperature range 150-300 °C. An original method of image analysis on sub-boundaries from electron backscatter diffraction maps was applied to quantify the sub-grain size distributions. The change in average sub-grain size with time at several temperatures was then used to estimate sub-grain boundary mobilities in both Al-Mn alloys. The activation energies for sub-grain mobility were found to be 48 and 52 and kJ.mol^-1 for the 0.1 and 0.3 % Mn alloys respectively, with the higher Mn alloy exhibiting lower rates. The sub-boundary mobilities are higher than expected from previous similar work on deformed Al-Si crystals. The orientation dependence of sub-grain growth is also examined.
International Journal of Materials Research

emse-00463551
https://hal-emse.ccsd.cnrs.fr/emse-00463551
DOI : 10.3139/146.110057

Éditeur(s) : HAL CCSD Botanical Society of America
Résumé :  
Tree buckling risk (actual height/critical buckling height) is an important biomechanical trait of plant growth strategies, and one that contributes to species coexistence. To estimate the diversity of this trait among wide samples, a method that minimizes damage to the plants is necessary. On the basis of the rarely used, complete version of Greenhill's model (1881, Proceedings of the Cambridge Philosophical Society 4(2): 65-73), we precisely measured all the necessary parameters on a sample of 236 saplings of 16 species. Then, using sensitivity (variance) analysis, regressions between successive models for risk factors and species ranks and the use of these models on samples of self- and nonself-supporting saplings, we tested different degrees of simplification up to the most simple and widely used formula that assumes that the tree is a cylindrical homogeneous pole. The size factor had the greatest effect on buckling risk, followed by the form factor and the modulus of elasticity of the wood. Therefore, estimates of buckling risk must consider not only the wood properties but especially the form factor. Finally, we proposed a simple but accurate method of assessing tree buckling risk that is applicable to a wide range of samples and that requires mostly nondestructive measurements.
ISSN: 0002-9122

hal-01032059
https://hal.archives-ouvertes.fr/hal-01032059

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
Differentiating between forced regressive deposits from deglacial periods inhigh latitude domains and forced regressive deposits from the onset of glacialperiods in low latitude domains is fundamental for the accurate interpretationof glacial cycles within the geological record and then for thereconstruction of palaeogeography and palaeo-climate. A forced regressivedeglacial sequence is documented from the Lake Saint-Jean basin (Quebec,Canada). In this area, the Late Pleistocene to Holocene sediments haverecorded the Laurentide ice sheet retreat accompanied by the invasion ofmarine waters (Laflamme Gulf) from ca 129 cal kyr BP. Subsequently, fluviodeltaicand coastal prograding wedges were deposited; they followed thebase-level fall due to glacio-isostatic rebound. This succession, representinga transition from glacial to post-glacial periods within a previously glaciatedarea, was investigated through recent mapping, preserved landforms, faciesanalysis, and new optical stimulated luminescence and radiocarbon dates.Three basin-scale geological sections share a common lower part made ofisolated ice-contact fan deposits overlying bedrock. Throughout the entirebasin, ice-contact fans are capped by glacimarine muds. Above, fluvial andcoastal prograding systems were deposited and evolved through four steps:(i) deltaic systems progressively increased in width; (ii) coastal influence onsedimentation increased; (iii) hydrographic drainage systems became moreorganised; and (iv) deltas graded from steep (Gilbert delta) to low-angle foresets(mouth-bar delta). Deposited during the base-level fall from glacioisostaticrebound, the complete succession has been designated as a singlefalling stage system tract referred to as a deglacial falling stage system tract.It is representative of a deglaciation sequence in areas previously covered byice during glacial periods (i.e. medium to high latitude domains). Diagnosticcriteria are provided to identify such a deglacial falling stage system tract inthe geological record, which may aid identification of previously unknownglacial cycles.
ISSN: 1469-3496

insu-01184731
https://hal-insu.archives-ouvertes.fr/insu-01184731
DOI : 10.1111/sed.12196

Éditeur(s) : HAL CCSD Optical Society of America
Résumé : International audience
A linear least square (LLS) method is proposed to process polarization dependent SHG intensity analysis at pixel-resolution level in order to provide an analytic solution of nonlinear susceptibility χ(2) coefficients and of fibril orientation. This model is applicable to fibrils with identical orientation in the excitation volume. It has been validated on type I collagen fibrils from cell-free gel, tendon and extracellular matrix of F1 biliary epithelial cells. LLS is fast (a few hundred milliseconds for a 512 × 512 pixel image) and very easy to perform for non-expert in numerical signal processing. Theoretical simulation highlights the importance of signal to noise ratio for accurate determination of nonlinear susceptibility χ(2) coefficients. The results also suggest that, in addition to the peptide group, a second molecular nonlinear optical hyperpolarizability β contributes to the SHG signal. Finally from fibril orientation analysis, results show that F1 cells remodel extracellular matrix collagen fibrils by changing fibril orientation, which might have important physiological function in cell migration and communication.
ISSN: 1094-4087

hal-01139871
https://hal.archives-ouvertes.fr/hal-01139871
DOI : 10.1364/OE.23.013309
PUBMED : 26074581

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We are concerned with the three-dimensional magnetostatic problem where the nonhomogeneities and the source are confined to a bounded domain. We derive a mixed formulation of this problem whose unknowns are the magnetic field, a current vector potential which is introduced as an auxiliary unknown, and a boundary unknown which results from the boundary integral method. This formulation is an improvement with respect to previous formulations proposed in the literature in the sense that it leads to an easier implementation using Nédélec's edge elements and boundary elements, and to good numerical accuracy. Some numerical results are described and compared with those obtained by using the classical formulation in a scalar potential.
ISSN: 0168-9274

hal-00730199
https://hal.archives-ouvertes.fr/hal-00730199

Éditeur(s) : HAL CCSD
Résumé : For a decade, distance-based methods have been largely employed and improved in the field of spatial economics. Such tools are very powerful to evaluate accurately the spatial distribution of plants or retail stores for example (Duranton and Overman, 2008; Jensen and Michel, 2011). In the present paper, we introduce a new statistic measure based on distances to evaluate the spatial concentration of economic activities. As far as we know, the m function is the first relative density function proposed in the economic literature. This tool completes the typology of distance-based methods recently drawn up by Marcon and Puech (2014). By working on several theoretical and empirical examples, we prove the advantages and the limits of the m function to gauge the spatial structures in spatial economics.
https://hal.archives-ouvertes.fr/hal-01082178

hal-01082178
https://hal.archives-ouvertes.fr/hal-01082178
https://hal.archives-ouvertes.fr/hal-01082178/document

Éditeur(s) : Springer
Résumé : The compilation of results obtained on three giant piston cores from the Whittard, Shamrock and Guilcher turbidite levees reveals a high-resolution stratigraphic record for the Bay of Biscay. Due to the abundance of reworked sediments in these sedimentary environments, a specific methodological approach, based on an X-ray-assisted subsampling phase associated with sedimentological, geochemical and micropalaeontological analyses, was implemented. With an accurate chronological framework, this multi-proxy investigation provides observations on the 'Fleuve Manche' palaeoriver and the British-Irish Ice Sheet (BIS) histories over the last 20,000 years. The results obtained highlight the direct influence of the decay of the BIS on the Bay of Biscay deep-sea clastic sedimentation during the last European deglacial phase. During this period, the annual BIS cycle of meltwater seems enough to generate seasonal turbidity currents associated with exceptional sedimentation rates in all the Celtic and Armorican turbidite systems. With very high sedimentation rates, the turbidite levees represent the main deep-sea clastic depositional area. Long coring combined with a very careful subsampling method can provide continuous high-resolution palaeoenvironmental signals.
Geo-Marine Letters (0276-0460) (Springer), 2006-12 , Vol. 26 , N. 6 , P. 317-329

Droits : 2006 Springer Science+Business Media
http://archimer.ifremer.fr/doc/2006/publication-2142.pdf
DOI:10.1007/s00367-006-0048-9
http://archimer.ifremer.fr/doc/00000/2142/

Éditeur(s) : HAL CCSD springer
Résumé : International audience
This paper focuses on the study of the behavior of a genetic algorithm based classier system, the Adapted Pittsburgh Classier System (A.P.C.S), on maze type environments containing aliasing squares. This type of environment is often used in reinforcement learning literature to assess the performances of learning methods when facing problems containing non markovian situations. Through this study, we discuss on the performance of the APCS upon two mazes (Woods 101 and Maze E2) and also on the eciency of an improvement of the APCS learning method inspired from the XCS: the covering mechanism. We manage to show that, without any memory mechanism, the APCS is able to build and to keep accurate strategies to produce regular sub-optimal solution to these maze problems. This statement is shown through a comparison between the results obtained by the XCS on two specic maze problems and those obtained by the APCS.
Lecture notes in computer science

hal-00542922
https://hal.archives-ouvertes.fr/hal-00542922
DOI : 10.1007/978-3-642-17508-4_8

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tropical islands are characterized by thermal and orographical forcings which may generate microscale air mass circulations. The Lesser Antilles Arc includes small tropical islands (width lower than 50 km) where a total of one-and-a-half million people live. Air quality over this region is affected by anthropogenic and volcanic emissions, or saharan dust. To reduce risks for the population health, the atmospheric dispersion of emitted pollutants must be predicted. In this study, the dispersion of anthropogenic nitrogen oxides (NOx) is numerically modelled over the densely populated area of the Guadeloupe archipelago under weak trade winds, during a typical case of severe pollution. The main goal is to analyze how microscale resolutions affect air pollution in a small tropical island. Three resolutions of domain grid are selected: 1 km, 333 m and 111 m. The Weather Research and Forecasting model (WRF) is used to produce real nested microscale meteorological fields. Then the weather outputs initialize the Lagrangian Particle Dispersion Model (FLEXPART). The forward simulations of a power plant plume showed good ability to reproduce nocturnal peaks recorded by an urban air quality station. The increase in resolution resulted in an improvement of model sensitivity. The nesting to subkilometer grids helped to reduce an overestimation bias mainly because the LES domains better simulate the turbulent motions governing nocturnal flows. For peaks observed at two air quality stations, the backward sensitivity outputs identified realistic sources of NOx in the area. The increase in resolution produced a sharper inverse plume with a more accurate source area. This study showed the first application of the FLEXPART-WRF model to microscale resolutions. Overall, the coupling model WRF-LES-FLEXPART is useful to simulate the pollutant dispersion during a real case of calm wind regime over a complex terrain area. The forward and backward simulation results showed clearly that the subkilometer resolution of 333 m is necessary to reproduce realistic air pollution patterns in this case of short-range transport over a complex terrain area. Globally, this work contributes to enrich the sparsely documented domain of real nested microscale air pollution modelling. This study dealing with the determination of the proper resolution grid and proper turbulence scheme, is of significant interest to the near-source and complex terrain air quality research community.
ISSN: 1352-2310

hal-01349208
https://hal.archives-ouvertes.fr/hal-01349208
DOI : 10.1016/j.atmosenv.2016.05.028

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
1. Despite considerable interest in the application of plant functional traits to questions of community assembly and ecosystem structure and function, there is no consensus on the appropriateness of sampling designs to obtain plot-level estimates in diverse plant communities. 2. We measured 10 plant functional traits describing leaf and stem morphology and ecophysiology for all trees in nine 1-ha plots in terra firme lowland tropical rain forests of French Guiana (N = 4709). 3.We calculated, by simulation, the mean and variance in trait values for each plot and each trait expected under seven sampling methods and a range of sampling intensities. Simulated sampling methods included a variety of spatial designs, as well as the application of existing data base values to all individuals of a given species. 4. For each trait in each plot, we defined a performance index for each sampling design as the proportion of resampling events that resulted in observed means within 5% of the true plot mean, and observed variance within 20%of the true plot variance. 5. The relative performance of sampling designs was consistent for estimations of means and variances. Data base use had consistently poor performance for most traits across all plots, whereas sampling one individual per species per plot resulted in relatively high performance. We found few differences among different spatial sampling strategies; however, for a given strategy, increased intensity of sampling resulted in markedly improved accuracy in estimates of trait mean and variance. 6. We also calculated the financial cost of each sampling design based on data from our 'every individual per plot' strategy and estimated the sampling and botanical effort required. The relative performance of designs was strongly positively correlated with relative financial cost, suggesting that sampling investment returns are relatively constant. 7. Our results suggest that trait sampling for many objectives in species-rich plant communities may require the considerable effort of sampling at least one individual of each species in each plot, and that investment in complete sampling, though great, may be worthwhile for at least some traits.
ISSN: 0269-8463

hal-00594009
https://hal.archives-ouvertes.fr/hal-00594009

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
We develop and implement a new method to take into account the impact of waves into the 3-D circulation model SYMPHONIE (Marsaleix et al., 2008, 2009a), following the simplified equations of Bennis et al. (2011) which use glm2z-RANS theory (Ardhuin et al., 2008b). These adiabatic equations are completed by additional parameterizations of wave breaking, bottom friction and wave-enhanced vertical mixing, making the forcing valid from the surf zone through to the open ocean. The wave forcing is performed by wave generation and propagation models WAVEWATCH III® (Tolman, 2008, 2009; Ardhuin et al., 2010) and SWAN (Booij et al., 1999). The model is tested and compared with other models for a plane beach test case, previously tested by Haas and Warner (2009) and Uchiyama et al. (2010). A comparison is also made with the laboratory measurements of Haller et al. (2002) of a barred beach with channels. Results fit with previous simulations performed by other models and with available observational data. Finally, a realistic case of energetic waves travelling over a coast of the Gulf of Lion (in the northwest of the Mediterranean Sea) for which currents are available at different depths as well as an accurate bathymetric database of the 0-10 m depth range, is then simulated. A grid nesting approach is used to account for the different forcings acting at different spatial scales. The simulation coupling the effects of waves and currents is successful to reproduce the powerful northward littoral drift in the 0-15 m depth zone. More precisely, two distinct cases are identified: when waves have a normal angle of incidence with the coast, they are responsible for complex circulation cells and rip currents in the surf zone, and when they travel obliquely, they generate a northward littoral drift. These features are more complicated than in the test cases, due to the complex bathymetry and the consideration of wind and non-stationary processes. Wave impacts in the inner shelf are less visible since wind and regional circulation seem to be the predominant forcings. Besides, a discrepancy between model and observations is noted at that scale, possibly linked to an underestimation of the wind stress. Lastly, this three-dimensional method allows a good representation of vertical current profiles and permits to calculate the shear stress associated with wave and current. Future work will focus on the combination with a sediment transport model.
ISSN: 1812-0806

hal-00766548
https://hal.archives-ouvertes.fr/hal-00766548
https://hal.archives-ouvertes.fr/hal-00766548/document
https://hal.archives-ouvertes.fr/hal-00766548/file/os-8-657-2012.pdf
DOI : 10.5194/osd-8-2417-2011

Éditeur(s) : HAL CCSD
Résumé : International audience
Reply: We thank Keelan and colleagues for their letter questioning the accuracy of testosterone measurement in cord blood obtained by immunoassay methods...
Human Reproduction

hal-01560277
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01560277
DOI : 10.1093/humrep/dex076
PUBMED : 28453619

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Pathogenic agents can be very hard to detect, and usually they do not cause illness for several hours or days. To improve the speed and the accuracy of detection tests and satisfy the needs of early diagnosis, molecular biology methods such as PCR are now used. However, selecting a proper target gene and designing good primers is often not easy. We present a dedicated website, http://patho-genes.org, where we provide every sequence, functional annotation, published primer and relevant article for every annotated gene of major pathogenic bacterial species listed as key agents to be used for a bioterrorism attack. Each published primer was analysed to determine its melting temperature, its specificity and its coverage (i.e. its sensitivity against every allele of its target gene). Data generated have been organized in the form of data sheet for each gene, which are available through multiple browser panels and query systems.
ISSN: 1751-7915

hal-01546181
https://hal.archives-ouvertes.fr/hal-01546181
DOI : 10.1111/j.1751-7915.2012.00353.x

Éditeur(s) : HAL CCSD
Résumé : International audience
The challenge is to implement research that can estimate the consequences ofclimate changes in terms of impact on terrestrial environments and resources.Emphasis should be placed on regions dependent on natural resources and forwhich demographic pressure is strong. Simulations obtained from climate modelprojections (using different Representative Concentration Pathways (RCPs))predict that the Mediterranean basin and its southern periphery are particularlyvulnerable to water resources and environmental impact (IPCC, AR5, 2013).An annual rainfall decrease by 30% is found for the projection period 2070-2099(IPCC, AR5, 2013) associated with a decrease in water resources by 30 to 50%(Milano, 2012). In addition, several studies using regional atmospheric modelsindicate an increase in the precipitation inter-annual variability with extremeevents and a spatial heterogeneous signature, superimposed on a decrease in thetotal precipitation amount (Giorgi and Lionello, 2008; Raible et al. 2010).Currently, regional climate projections are highly sensitive to the climate modelused. In particular, spatial resolution as well as local climate conditions seemto impact significantly on the simulations (Jacob et al. 2014).The Mediterranean region, at the interface between arid and temperate climateswith several mountainous areas, is a complex climate system affected by theinteractions between mid-latitude and sub-tropical processes. In this context,Morocco, located at the transition between a temperate climate to the North anda tropical climate to the south constitutes a key area for an impact and sensitivitystudy to global climate changes. The climate is influenced by the Atlantic Ocean,the Mediterranean Sea and the Sahara, together with a very steep orography inthe Atlas region. The precipitation distribution is therefore characterised by greatspatial variability, and exhibits a marked seasonality, a strong inter-annualvariability (Ouda et al. 2005) and in general a pronounced gradient from northto south and west to east. At a broader scale, Morocco is located on the subtropicalsubsidence path and between the Acores High and the Saharan Low (Agoussine,2003). Several studies have also identified strong links with inter-annualprecipitation variability and NAO index (Knippertz, 2003) as well as remoteclimate modes (Esper et al. 2007).Continental climate variability at a local/regional scale, if it is to be integratedin climate predictions, needs to be supported by long-term observation.Meteorological stations in Morocco provide climatic data mainly for the last40 years with only a few stations located in the mountainous region (Tramblayet al. 2012; 2013; Driouech et al. 2010). This climate database is also supportedby the IAEA network providing stations for which isotope tracers have beenapplied to daily/monthly rain and water vapour samples over 2 to 3 years between2000 and 2004. Besides the poor coverage of instrumented areas, lacustrinesystems can provide a climatic data set that offers access to short and long-termtime series of climate parameters when knowledge of modern lake water balanceis combined with lacustrine sedimentary-climate records. Lake sediment recordsideally provide high resolution climate/environmental information of the last10,000 years (Magny et al. 2013). This time interval (corresponding to theHolocene) is a key period to investigate short and long-term climate variabilityand to improve prediction in a warming climate.In this study we present an integrated approach focusing on a mountainous lake(Aguelmam Azigza). The modern lake system study is based on site monitoring(2012-2016) and available regional hydro-climatic data. These data show thatlake level changes during the instrumented period were mainly driven byprecipitation following the high inter-annual variability. These data are thencompared with accurately dated short sediment cores retrieved in the same lake.Micro-scale geochemical and sedimentological analyses of these sequencesenable us to identify various sedimentary facies that can be linked with periodsof high (low) lake levels over the past decades.
The Mediterranean Region under Climate ChangeLa méditerranée face au changement climatique

insu-01394690
https://hal-insu.archives-ouvertes.fr/insu-01394690
https://hal-insu.archives-ouvertes.fr/insu-01394690/document
https://hal-insu.archives-ouvertes.fr/insu-01394690/file/Vidaletal.2016-COP22-Chap1.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The number of satellites and sensors devoted to Earth observation has become increasingly elevated, delivering extensive data, especially images. At the same time, the access to such data and the tools needed to process them has considerably improved. In the presence of such data flow, we need automatic image interpretation methods, especially when it comes to the monitoring and prediction of environmental and societal changes in highly dynamic socio-environmental contexts. This could be accomplished via artificial intelligence. The concept described here relies on the induction of classification rules that explicitly take into account structural knowledge, using Aleph, an Inductive Logic Programming (ILP) system, combined with a multi-class classification procedure. This methodology was used to monitor changes in land cover/use of the French Guiana coastline. One hundred and fifty-eight classification rules were induced from 3 diachronic land cover/use maps including 38 classes. These rules were expressed in first order logic language, which makes them easily understandable by non-experts. A 10-fold cross-validation gave significant average values of 84.62%, 99.57% and 77.22% for classification accuracy, specificity and sensitivity, respectively. Our methodology could be beneficial to automatically classify new objects and to facilitate object-based classification procedures.
ISSN: 0098-3004

hal-01369822
https://hal.archives-ouvertes.fr/hal-01369822
https://hal.archives-ouvertes.fr/hal-01369822/document
https://hal.archives-ouvertes.fr/hal-01369822/file/CAGEO-D-13-00538R1_article.pdf
DOI : 10.1016/j.cageo.2014.08.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD
Résumé : International audience
Optimizing the resource extraction and limiting the environmental constraint motivate to accurately characterize reservoirs. The extraction of resources induces volume change of the reservoir causing displacements in the surrounding medium up to the surface. The resulting surface deformation is usually significant enough to be measurable by geodetic instruments (GPS, satellites, tiltmeters, strainmeters). However, the data needs to be associated to a reservoir model using an inverse scheme to allow the estimation of physical properties of the reservoir. Complete geodetic data including InSAR, GPS, tilt, strain and gravimetric data are uncommon for conventional, unconventional or mining exploitations. In this study, we work on the one site that gathers a wide range of geodetic data: the salt exploitation of Vauvert, France, operated by KemOne. Our approach aims at estimating the volume changes of the cavities created by the extraction combining all the available geodetic data. To do so, we minimize a global functional including weighting factors for each data type. The weighting factors are optimally estimated for our study and can be adapted depending on the issue. Hence, an optimal distribution of data can be suggested for a specific reservoir characterization.
79th EAGE Conference
Paris, France

Droits : http://hal.archives-ouvertes.fr/licences/copyright/
hal-01575426
https://hal.archives-ouvertes.fr/hal-01575426
https://hal.archives-ouvertes.fr/hal-01575426/document
https://hal.archives-ouvertes.fr/hal-01575426/file/reservoir-characterization-inversion.pdf
DOI : 10.3997/2214-4609.201700987

Éditeur(s) : HAL CCSD Elsevier
Résumé : Field isolates of Toxoplasma gondii in Europe and North America have been grouped into three clonal lineages that display different virulence in mice. Whether the genetic structure of the parasite is related to clinical expression in humans has not yet been demonstrated. We developed an enzyme-linked immunosorbent assay which uses lineage-specific, polymorphic polypeptides derived from the dense granule antigens, GRA5 and GRA6. Our goal was to compare serotypical patterns observed in asymptomatic versus symptomatic (ocular disease and severe infection in human immunodeficiency virus (HIV)-positive patients) infections among patients from Europe and South America. Independent of the clinical presentation of the disease, serotypes differed according to geographical origin, with a homogeneous distribution of serotype II in Europe and of serotypes I and III in South America. We conclude that GRA5-GRA6 serotyping is an interesting tool to study serotype prevalence in populations but it is not an accurate marker of pathogenicity of Toxoplasma infection in humans.
ISSN: 1286-4579

hal-00306841
https://hal.archives-ouvertes.fr/hal-00306841
DOI : 10.1016/j.micinf.2008.04.001
PUBMED : 18539501