Éditeur(s) : Université de Bretagne Occidentale
Résumé : The aim of this study is to present a comparison of large oceanic fracture zones structures. The first part concerns the results of the Vemanaute dive cruise on the Vema transform fault. The site I is located on the South Wall of the fracture zone. Two sections have covered the entire height of the northern flan and allowed in situ observations and sampling of all the units that constitute the "normal" oceanic crust and upper mantle in a correct stratigraphic order.
Ce mémoire présente les résultats d'une étude comparative concernant les structures caractéristiques des grandes failles transformantes océaniques. Dans une première partie sont présentés les résultats de la campagne de plongées Vemanaute sur la faille transformante Vema. Le premier site étudié est situé sur le mur sud de la vallée transformante. Deux sections ont été levées couvrant toute la hauteur du flanc ; elles nous ont permis d'observer in situ, pour la première fois, et de prélever tous les éléments constituant la croûte océanique "normale" et le manteau supérieur, dans leur ordre stratigraphique.

Droits : UBO
http://archimer.ifremer.fr/doc/00034/14528/11826.pdf
http://archimer.ifremer.fr/doc/00034/14528/

Éditeur(s) : HAL CCSD
Résumé : This work is devoted to the theoritical research and to the numerical calculus of weak solutions (in the sens of generalized functions) for the non linear transport equation((∂u)/(∂t))(x,y,t)+a(x,y,t)((∂f(u))/(∂x))(x,y,t)+b(x,y,t)((∂g(u))/(∂y))(x,y,t)=0 pour t>0with the initial condition u(x,y,0)=u₀(x,y) where the functions {(x,y,t)→a(x,y,t)} and {(x,y,t)→b(x,y,t)} belong to L^{∞}(R²×R⁺) (but can be discontinuous), the functions f and g are smooth and monotonous, the function {(x,y)→u₀(x,y)} belongs to L^{∞}(R²). We recall the necessary notions on nonlinear generalized functions for introducing their tensorial product. The main results (to determine the weak solutions) are sufficient conditions so that, when a sum of généralized functions (like Heaviside or Dirac products) is associated with zero, each terms of the sum is equal to zero. Thanks to these theoretical results, we can solve the Riemann problem with the help of a solver written like tensorial product of Heaviside functions (or like a sum of tensorial product of Heaviside functions) in order to obtain the weak solutions. These weak solutions allow to develop two dimensional numerical Godunov type schemes. Then, numerical tests are performed which give a comparison between the results obtained by these 2D schemes and the ones of the splitting method. These tests prove that the 2D numerical schemes are as reliable as the ones obtained by splitting. They are also more simple in their expression. Moreover, a more detailed comparative study of the two types of numerical schemes show that the 2D schemes are far less expensive in the linear case as well as in the non linear case. They are stable for the L^{∞} norm, unlike the splitting schemes. At least some perspectives as well as an existence theorem of a strong solution "almost eveywhere" for linear hyberbolic systems are studied.
Nous nous intéressons à la recherche et au calcul numérique de solutions faibles (au sens des fonctions généralisées) de l'équation de transport non linéaire((∂u)/(∂t))(x,y,t)+a(x,y,t)((∂f(u))/(∂x))(x,y,t)+b(x,y,t)((∂g(u))/(∂y))(x,y,t)=0 pour t>0complétée de la condition initiale : u(x,y,0)=u₀(x,y) où les fonctions {(x,y,t)→a(x,y,t)} et {(x,y,t)→b(x,y,t)} appartiennent à L^{∞}(R²×R⁺) (mais peuvent être discontinues), les fonctions f et g sont lisses et monotones, la fonction {(x,y)→u₀(x,y)} appartient à L^{∞}(R²). Des rappels sur les fonctions généralisées nous permettent d'introduire leur produit tensoriel. Un des résultats clés (pour déterminer ultérieurement les solutions faibles cherchées) donne des conditions suffisantes pour que, lorsqu'une somme de fonctions généralisées (de type produit d'Heaviside ou de Dirac) est associée à 0, chacun des termes de la somme est nul. Grâce à ces résultats théoriques, on résout le problème de Riemann 2D à l'aide d'un solveur s'écrivant comme produit tensoriel de fonctions type Heaviside (ou comme somme de produit tensoriel de fonctions type Heaviside) afin d'obtenir les solutions faibles. Ces solutions faibles permettent la construction des schémas numériques de type Godunov 2D. Nous les validons par des test numériques comparant les résultats obtenus par ces schémas 2D et ceux de la méthode du splitting. Ces tests montrent que les schémas numériques 2D sont aussi fiables que ceux par splitting, alors qu'ils sont plus simples dans leur écriture. Une étude comparative plus complète entre les deux types de schémas numériques montre de plus que les schémas 2D sont nettement moins coûteux à la fois dans les cas linéaire et non linéaire et qu'ils sont stables pour la norme L^{∞}, contrairement aux schémas par splitting. Enfin des perspectives ainsi qu'un théoréme d'existence de solutions fortes "presque partout" pour des systèmes hyperboliques linéaires sont abordés.
https://hal.archives-ouvertes.fr/tel-01487366

Droits : info:eu-repo/semantics/OpenAccess
tel-01487366
https://hal.archives-ouvertes.fr/tel-01487366
https://hal.archives-ouvertes.fr/tel-01487366/document
https://hal.archives-ouvertes.fr/tel-01487366/file/th%C3%A8se_olivier_jouannelle_HAL.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Cretaceous paleogeography and the kinematic evolution of the Iberian plate are poorly constrained. Especially problematic is to reconcile Iberian paleomagnetic data with paleomagnetic data of the neighboring plates and with Euler poles derived from seafloor magnetic anomalies. The first limitation arises from the Cretaceous Normal Polarity Superchron where paleogeographic reconstruction using marine magnetic anomalies is handicapped. The second arises from the paucity of reliable paleomagnetic poles with satisfactory statistical criteria and age. In order to address these shortcomings and provide new high quality paleomagnetic poles for Iberia, we conducted a detailed rock magnetic and paleomagnetic study of two Cretaceous magmatic sills, the Paço de Ilhas (PI) and Foz da Fonte (FF) sills, from the Lusitanian Basin, Portugal, recently dated at about 88 and 94 Ma, respectively. Our results show that the magnetic mineralogy of the sills is primary, i.e., acquired during magma cooling, and essentially represented by titanomagnetite. The corresponding paleomagnetic poles match the synthetic APWP from the African plate at 80 and 100 Ma. On the basis of a rigorous selection of Iberian Cretaceous poles, we then calculated mean paleomagnetic poles for different time intervals and found that Iberian paleomagnetic data fit well the global APWP between 70 and 120 Ma, but move far away from the APWP at pre-rift times. Our approach shows that new and better constrained paleomagnetic poles can aide in solving part of the contradiction between Iberian and African APWPs.
ISSN: 0148-0227

hal-00758103
https://hal.archives-ouvertes.fr/hal-00758103
DOI : 10.1029/2011JB009067

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Superposed to ductile syn-metamorphic deformations, post-foliation deformations affect metamorphic units during their exhumation. Understanding the role of such deformations in the structuration of metamorphic units is key for understanding the tectonic evolution of convergence zones. We characterize post-foliations deformations using 3D modelling which is a first-order tool to describe complex geological structures, but a challenging task where based only on surface data. We propose a modelling procedure that combines fast draft models (interpolation of orientation data), with more complex ones where the structural context is better understood (implicit modelling), allowing us to build a 3D geometrical model of Syros Island blueschists (Cyclades), based on field data. With our approach, the 3D model is able to capture the complex present-day geometry of the island, mainly controlled by the su-perposition of three types of post-metamorphic deformations affecting the original metamorphic pile: i) a top-to-South ramp-flat extensional system that dominates the overall island structure, ii) large-scale folding of the metamorphic units associated with ramp-flat extensional system, and iii) steeply-dipping normal faults trending dominantly NNW-SSE and EW. The 3D surfaces produced by this method match outcrop data, are geologically consistent, and provide reasonable estimates of geological structures in poorly constrained areas.
ISSN: 0191-8141

insu-01188400
https://hal-insu.archives-ouvertes.fr/insu-01188400
DOI : 10.1016/j.jsg.2015.07.002

Éditeur(s) : HAL CCSD
Résumé : The Karakorum Fault zone (KFZ), lying in the west of the Tibetan plateau, is an important dextral strike-slip fault and the important northern geological boundary of the west Himalaya. In the AyilaRi' gyu Range-Gai Basin area lying in the southeast of the KFZ, Ar-40/Ar-39 thermochronologic analysis was performed on the syn-tectonic minerals in the, metamorphic rocks in the Karakorum ductile shear zone, with the base of petrology and deformation structure researches. According to the microstructure features, the minerals in the shear zone recorded the continuous deformation from high ( > 600 degrees C) to low temperature ( < 250 degrees C) appeared as that the nearly horizontal dextral shearing has transformed into the oblique dextral normal slip, made the greenschist facies of deformation stack oil the early medium-high temperature deformation, indicated the uplift during the slip. The thermochronologic revealed the continuous shear process from the early Miocene to 4Ma at least, which containing three rapid cooling stage: from 25 similar to 22Ma to 21 similar to 18Ma, the deformation locally stopped or slower in the, shallow high temperature shear process; from 15Ma to 12Ma, the rapid uplift of the AyilaRi' gyu Range, the initial formation of the Gar Basin together with the main deep incision of river during the strip-slip of the KFZ; since 9Ma, the AyilaRi' gyu Range has increased the rapid uplift and the Gar Basin has formed finally. According to the different levels of deformation and the dextral displacement of the surface landform with different ages, the long term slip rate and the uplift rate indicated the intense dextral strike slip and uplift associated since the late Quarternary Period.
Acta Petrologica Sinica

hal-00411572
https://hal.archives-ouvertes.fr/hal-00411572

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present field data from segmented normal faults having particular displacement and overlapping geometries that may be related to down-dip branching of the fault segments. Based on a 3-D numerical modeling study of computed displacement and stress fields around different geometries of down-dip branched normal fault segments, we show that the bends of fault surfaces that coalesce at depth exert a significant influence on (I) the displacement distribution on the fault segment branches and (2) the quasi-static stress fields around the relay zones. The asymmetry in the displacement profiles and low fault interaction at relay zones modeled are consistent with the fault segment geometries observed in field data. As an application, we model the geometry and interaction of the Vallo di Diano normal fault which is segmented at the Earth's surface and which produced an earthquake of magnitude 6.4 along a single fault surface at depth. Numerical modeling of the segmented fault produces an asymmetric displacement profile and low shear stress at the relay zone consistent with the profile and fault interaction inferred from the held. We conclude that asymmetry of the displacement profile and large overlap/separation ratio of the unlinked relay zone can be indicators of the presence of a continuous fault surface underneath. These geometrical attributes are therefore important to consider in the probabilistic analysis of seismic hazard along segmented normal faults.
ISSN: 0191-8141

hal-00411161
https://hal.archives-ouvertes.fr/hal-00411161
DOI : 10.1016/j.jsg.2008.07.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Kazdag Massif exposes an extensional metamorphic dome in the Biga Peninsula of northwest Turkey, bounded on both flanks by detachments and/or shear zones. The northern flank is marked by the extensional Alakeci shear zone (ASZ), with poorly known P-T-t path. We therefore focus on metamorphic conditions and temporal history of the ASZ to determine its tectono-metamorphic evolution. ASZ mylonites were derived from both the footwall Kazdag Massif core metamorphic rocks and the hanging wall Cetmi melange lithologies. The mylonitic fabrics in the ASZ depict a top-to-the NNE shearing, parallel to the NNE-plunging stretching lineation and NNW-dipping mylonitic foliation. This geometry implies normal sense movement i.e. north-side down-dip extensional displacement along this flank of the Kazdag Massif. The northward transition from ductile to brittle-ductile shear regime through the ASZ shows that the non-coaxial deformation occurred at decreasing temperatures and degree of metamorphism. The paragenesis in equilibrium of the mylonitic gneisses and schists contains quartz + feldspar + muscovite + biotite + garnet staurolite, with late retrogressive chlorite after biotite and garnet. Calculated thermo-barometric conditions for ASZ rocks yielded pressures between 6.9 and 5.7 kbar and temperatures between 706 and 587 degrees C, which constrain the peak metamorphism. The mylonitic rocks supplied isochron Ar-39/Ar-40 mica ages between 26.97 and 24.19 Ma, which we interpret to date the cooling of the mylonites following the P-T decrease across the ASZ. The metamorphic data support the structural record and strengthen the extensional character of the ASZ. The transition from sillimanite-bearing footwall Kazdag Massif core gneisses in the deeper structural levels to chlorite schists; towards the shallow structural levels at the top of the ASZ, is consistent with an extensional exhumation of the metamorphic pile. These data allow us to determine the peak P-T conditions and the temporal evolution in the northern flank of the Kazdag Massif, where Late Oligocene extensional exhumation was assisted by NNE-directed ductile-brittle ASZ, which had operated from amphibolite to greenschist facies. The ASZ, together with similar time-constrained ductile-brittle activity of SW-directed detachment along the southern flank of the massif, collectively indicates a bivergent mode of extension in the western Kazdag Massif. The latter is likely influenced by magmatic activity spatially and temporally related to these extensional zones. At the regional scale, the bivergent tectono-metamorphic pattern of the Kazdag Massif is similar to those observed on other places of the north-central Aegean domain.
ISSN: 0024-4937

hal-00445246
https://hal.archives-ouvertes.fr/hal-00445246
DOI : 10.1016/j.lithos.2009.02.010

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called G-layer, in the fibre wall. The structure of G-layer has been recently described as a hydrogel thanks to N2 adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2 to 50 nm). This led us to revisit the concept of G-layer that was until now only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with typical thick G-layer while it is much less with thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without G-layer is as low as in normal wood. Not depending on the amount of pores, the pore sizes distribution are always centred around 6-12 nm. These results suggest that, among species producing fibres with G-layer, large structural differences of G-layer exist between species
ISSN: 0022-0957

hal-00387861
https://hal.archives-ouvertes.fr/hal-00387861
DOI : 10.1093/jxp/erp133

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Structural, metamorphic, and geochronologic work shows that the Ampelos/Dilek nappe of the Cycladic blueschist unit in the eastern Aegean constitutes a wedge of high-pressure rocks extruded during early stages of orogeny. The extrusion wedge formed during the incipient collision of the Anatolian microcontinent with Eurasia when subduction and deep underthrusting ceased and the Ampelos/Dilek nappe was thrust southward over the greenschist-facies Menderes nappes along its lower tectonic contact, the Cycladic-Menderes thrust, effectively cutting out a ∼30- to 40-km-thick section of crust. The upper contact of the Ampelos/Dilek extrusion wedge is the top-to-the-NE Selçuk normal shear zone, along which the Ampelos/Dilek nappe was exhumed by ∼30–40 km. Detailed Rb-Sr and 40Ar/39Ar dating of mylonites demonstrates that both shear zones operated between 42 and 32 Ma. There is no evidence for episodic motion during the ∼10 Myr life span of the shear zones, suggesting that both shear zones operated in a steady, nonepisodic fashion. Our data provide supporting evidence that simultaneous thrust-type and normal sense shearing can accomplish the early exhumation of deep-seated rocks
ISSN: 0278-7407

hal-00405013
https://hal.archives-ouvertes.fr/hal-00405013
DOI : 10.1029/2005TC001872

Éditeur(s) : Université de Pau et des Pays de l'Adour
Résumé : In a context of decline of European eel (Anguilla anguilla L.) and search for biological markers of habitat use and quality, a multidisciplinary approach was engaged on the Adour estuary and its associated wetlands. Two axes were developed. The first axe aimed at highlighting the successive presence of the species in different ecosystems based on the otolith elemental composition. The second aimed at the evaluation of the chemical pressure underwent by eels based on the contaminant bioconcentration in soft tissues and the early molecular response to the chemical stress. With a view to the analyses of otolith elemental composition taking into account the 3D structure, the low elemental concentration in the matrix and keeping the finest spatial resolution, four micro sampling strategies and multi elemental analyses using femtosecond laser ablation ICP-MS were tested (crater, 1D scan, 2D scan, flash ablation). The strategy showing the best compromise according to the objectives (continuous recording, multi elemental approach) was applied on otolith of yellow eels from the Adour. The simultaneous use of Sr and Ba profiles, after validation, represents a new tool, easy, fast and reliable for the reconstruction of freshwater and brackish ecosystems use by eel avoiding misinterpretation due to vaterite inclusions. Three major behaviors were highlighted on the Adour: a residency in brackish water, a residency in freshwater and nomad behavior. The last one is illustrated by a shift to brackish water after three to four years spent in freshwater. Simultaneously, the study of inorganic and organic contamination of eel soft tissues showed that sampled wetlands are moderately contaminated. These results were confirmed by the first estimation, in wild conditions, of the early response to the chemical stress using the hepatic expression of CYP1A1 gene measured by real time RT-PCR. Conversely, in the downstream part of the Adour estuary, Hg loads in eels, especially methyl mercury, and PCBs analyses indicate values that need further investigations considering the European norms of consumption. The comparison of the different markers used (heavy metal and organochlorinated compounds contamination of soft tissues, condition index) support a lower quality of the estuary despite higher eel growth rate on this site. This study supports the use of numerous markers in integrated studies in order to understand and specify the relationships between eels and their continental growth zones.
Dans un contexte de déclin de l'anguille européenne (Anguilla anguilla L.) et de recherche de marqueurs biologiques retraçant la fréquentation des divers habitats et renseignant sur la qualité de ceux-ci, une approche pluridisciplinaire a été mise en place sur l'estuaire de l'Adour et ses zones humides. Deux axes ont été privilégiés. Le premier cherchait à visualiser la présence successive de l'espèce dans différents écosystèmes en se basant sur la composition élémentaire des otolithes. Le deuxième avait pour but d'évaluer la pression chimique inorganique et organique subie par l'anguille dans les zones d'études en s'appuyant sur la bioconcentration des contaminants dans les tissus mous et la réponse moléculaire précoce au stress chimique. En vue des analyses de la composition élémentaire des otolithes et pour répondre au mieux à la structure en trois dimensions, à la faible concentration des éléments dans la matrice tout en conservant une résolution spatiale la plus fine possible, quatre stratégies de micro-échantillonnage et d'analyses multiélémentaires par ablation laser femtoseconde ICP-MS ont été testées (cratère, scan 1D, scan 2D, ablation flash). La méthodologie présentant le meilleur compromis par rapport aux objectifs fixés (enregistrement continu, approche multiélémentaire) a ensuite été appliquée sur les otolithes d'anguilles jaunes du Bas-Adour. L'utilisation simultanée des profils continus de Sr et de Ba, après validation, constitue un outil facile d'utilisation, rapide et fiable pour reconstruire les historiques de fréquentation des différents écosystèmes estuariens et dulçaquicoles par l'anguille tout en s'affranchissant des problèmes potentiels liés aux inclusions de vatérite, un polymorphe du carbonate de calcium. Trois grands types de comportement ont pu être mis en évidence sur l'Adour : résidence en eau saumâtre, résidence en eau douce et nomadisme. Ce dernier est plus particulièrement illustré par un mouvement marqué vers l'eau saumâtre pour des individus ayant passé de trois à quatre ans dans l'eau douce. Parallèlement, l'étude de la contamination organique et inorganique des tissus mous de l'anguille a permis de déduire à la faible contamination des zones humides échantillonnées. La première estimation en condition naturelle de la réponse précoce au stress chimique par évaluation de l'expression hépatique du gène CYP1A1 par RT-PCR en temps réel confirme ces résultats. En revanche, dans la partie estuarienne aval de l'Adour, les niveaux en Hg, présent en majorité sous sa forme méthylée dans les anguilles, et l'analyse des PCBs indiquent des valeurs qui suscitent un examen plus approfondi au regard des normes européennes en vigueur. La confrontation des différents descripteurs (contamination des tissus mous par les métaux lourds et organochlorés, indice de condition) utilisés conforte la qualité moindre de la zone estuarienne malgré des performances de croissance de l'anguille favorisées sur ces sites. Ainsi, cette étude supporte l'intérêt de la mise en oeuvre de descripteurs multiples utilisés (niveaux de métaux lourds et organochlorés dans les tissus mous, réponse moléculaire au stress chimique, microchimie de l'otolithe, indice de condition, taux de croissance) dans des approches intégrées pour comprendre et préciser les relations existantes entre l'anguille et ses zones de croissance continentales.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2009/these-7381.pdf
http://archimer.ifremer.fr/doc/00000/7381/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We herein focus on understanding what controls the detachment and migration of oceanic crustal slices along subduction zones. We provide evidence for the coeval Middle to Late Cretaceous exhumation of oceanic blueschists in the same Neotethyan subduction zone, across more than 3000 km, from depths around 30-40 km, over a short time interval (similar to 25 Ma) compared to the duration of subduction (>100 Ma). We stress the importance of such a geodynamic process and suggest that this exhumation was promoted by a regional-scale change in the long-term interplate mechanical coupling. On the basis of geological and geophysical evidence, we propose that the upward migration of oceanic fragments in subduction zones is normally inhibited and only occurs discontinuously, as the subduction channel opens up in response to a major change in plate geodynamics, slab geometry and dynamics, mantle wedge and slab hydration, or a combination of these.
ISSN: 1525-2027

hal-00420898
https://hal.archives-ouvertes.fr/hal-00420898
DOI : 10.1029/2009GC002428

Résumé : Cette thèse a pour objet l'étude de la contrôlabilité à zéro de systèmes d'équations aux dérivées partielles paraboliques, que l'on rencontre en physique, chimie ou en biologie. En chimie ou en biologie, ces systèmes modélisent l'évolution au cours du temps d'une concentration chimique ou de la densité d'une population (de bactéries, de cellules). Le but de la contrôlabilité à zéro est d'amener la solution du système à l'état nul à un temps donné T, en agissant sur le système à l'aide d'un contrôle. Nous recherchons donc un contrôle, de norme minimale, tel que la solution associée y vérifie y(T)=O dans le domaine Omega considéré. Les problèmes de contrôlabilité à zéro considérés dans cette thèse sont de trois types. Dans un premier temps, nous nous intéressons à la contrôlabilité à zéro avec un nombre fini de contraintes sur la dérivée normale de l'état, pour l'équation de la chaleur semi-linéaire. Puis, nous analysons la contrôlabilité simultanée à zéro avec contrainte sur le contrôle, pour un système linéaire de deux équations paraboliques couplées. Notre dernière étude concerne la contrôlabilité à zéro d'un système non linéaire de deux équations paraboliques couplées. Nous abordons ces problèmes de contrôlabilité principalement à l'aide d'inégalités de Carleman. En effet, l'étude des problèmes de contrôlabilité à zéro, et plus généralement de contrôlabilité exacte, peut se ramener à l'établissement d'inégalités d'observabilité pour le problème adjoint, conséquences d'inégalités de Carleman. Nous construisons le contrôle optimal en utilisant la méthode variationnelle et nous le caractérisons par un système d'optimalité
This thesis is devoted to the study of the null controllability of systems of parabolic partial differential equations, which we meet in physics, chemistry or in biology. In chemistry or in biology, the se systems model the evolution in time of a chemical concentration or the density of a population (of bacteria, cells). The aim of nu Il controllability is to lead the solution of the system to zero in a given time T, by acting on the system with a control. Thus we are looking for a control, of minimal norm, such as the associated solution y satisfies y(T)=O in the domain Omega under concern. We consider three types of null controllability problems in this thesis. At first, we are interested in the null controllability with afinite number of constraints on the normal derivative of the state, for the serni-Iinear heat equation. Then, we analyze the simultaneous null controllability with constraint on the control, for a linear system of two coupled parabolic equations. Our last study deals with the null controllability ofa non linear system oftwo coupled parabolic equations. We approach these controllability problems mainly by means of Carleman's inequalities. Indeed, the study of null controllability problems, and more generally exact controllability problems, is equivalent to obtain observability inequalities for the adjoint problem, consequences of Carleman's inequalities. We build the optimal controlusing the variationnal method and we characterize it by an optimality system

http://www.theses.fr/2013AGUY0609/document

Éditeur(s) : Cnexo
Résumé : Article 246 of the international agreement on marine legislation project deals with the practical conditions of scientific research in the exclusive economic area and on the continental shelf. We feel heavily concerned by this article and the first consequences of this new legislation begin to be felt in a very unpleasant way. In a large portion of seas and oceans, corresponding to the exclusive economic areas, research is subjected to the authorisation granted "in normal circumstances" by coastal states if it is conducted "exclusively for a peaceful purpose and in the aim to increase the scientific knowledge on marine environment in the interest of the whole of humanity."
L'article 246 du projet de convention internationale sur le droit de la mer traite des conditions d'exercice de la Recherche Scientifique dans la zone économique exclusive et sur le plateau continental. Il nous concerne au premier chef et les premières conséquences de ce droit émergeant commencent à se faire sentir désagréablement. Ainsi, sur une vaste portion des mers et des océans, celle qui correspond aux "zones économiques exclusives", la Recherche est désormais soumise à autorisation que les États côtiers doivent "dans des circonstances normales" accorder si elle est poursuivie à des "fins exclusivement pacifiques et en vue d'accroître les connaissances scientifiques sur le milieu marin dans l'intérêt de l'humanité tout entière". [OCR NON CONTRÔLE]
La Lettre du Cnexo (Cnexo), 1980-09 , N. 3 , P. 1-6

Droits : Cnexo - Ifremer
http://archimer.ifremer.fr/doc/1980/publication-4774.pdf
http://archimer.ifremer.fr/doc/00000/4774/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Structural analysis along with 40Ar–39Ar and U–Pb datings in the Fuping massif provide new insight into the evolution of the eastern part of the Trans-North China Belt (North China Craton), from 2.7 Ga to 1.8 Ga. D1 is responsible for the development of a dome-and-basin structure coeval with crustal melting giving rise to migmatite and Nanying gneissic granites at 2.1 Ga. This dome-and-basin architecture resulted from the interference between a N–S compression of a weak ductile crust and gravity-driven vertical flow, in a high thermal regime. The next events involved flat lying ductile thrusting (D2) and normal faulting (D3) dated at around 1880 Ma and 1830 Ma, respectively. The D2 and D3 events belong to the Trans-North China Orogeny that results in the final amalgamation of the North China Craton. The D1 deformation is considered as evidence for an earlier orogen developed around 2.1 Ga prior to the Trans-North China Orogeny. The change in the deformation style between the 2.1 Ga and 1.8 Ga could be viewed as a consequence of the cooling of the continental crust in the North China Craton.
ISSN: 0191-8141

insu-00309553
https://hal-insu.archives-ouvertes.fr/insu-00309553
https://hal-insu.archives-ouvertes.fr/insu-00309553/document
https://hal-insu.archives-ouvertes.fr/insu-00309553/file/Trap-JStructuralGeology-2008.pdf
DOI : 10.1016/j.jsg.2008.05.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The growth of relief in active tectonic areas is mainly controlled by the interactions between tectonics and surface processes (erosion and sedimentation). The study of long-lived morphologic markers formed by these interactions can help in quantifying the competing effects of tectonics, erosion and sedimentation. In regions experiencing active extension, river-long profiles and faceted spurs (triangular facets) can help in un- derstanding the development of mountainous topography along normal fault scarps. In this study, we devel- oped analogue experiments that simulate the morphologic evolution of a mountain range bounded by a normal fault. This paper focuses on the effect of the fault slip rate on the morphologic evolution of the foot- wall by performing three analogue experiments with different fault slip rates under a constant rainfall rate. A morphometric analysis of the modelled catchments allows comparing with a natural case (Tunka half- graben, Siberia). After a certain amount of fault slip, the modelled footwall topographies of our models reaches a dynamic equilibrium (i.e., erosion balances tectonic uplift relative to the base level) close to the fault, whereas the topography farther from the fault is still being dissected due to regressive erosion. We show that the rates of vertical erosion in the area where dynamic equilibrium is reached and the rate of re- gressive erosion are linearly correlated with the fault throw rate. Facet morphology seems to depend on the fault slip rate except for the fastest experiment where faceted spurs are degraded due to mass wasting. A stream-power law is computed for the area wherein rivers reach a topographic equilibrium. We show that the erosional capacity of the system depends on the fault slip rate. Finally, our results demonstrate the pos- sibility of preserving convex river-long profiles on the long-term under steady external (tectonic uplift and rainfall) conditions.
ISSN: 0040-1951

hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966/document
https://hal.archives-ouvertes.fr/hal-00646966/file/preprint_Strak_2011.pdf
DOI : 10.1016/j.tecto.2011.10.005

Éditeur(s) : HAL CCSD American Society for Biochemistry and Molecular Biology
Résumé : International audience
alpha- and beta-spectrins are components of molecular scaffolds located under the lipid bilayer and named membrane skeletons. Disruption of these scaffolds through mutations in spectrins demonstrated that they are involved in the membrane localization or the maintenance of proteins associated with them. The ubiquitous alphaII-spectrin chain bears in its central region a unique domain that is sensitive to several proteases such as calpains or caspases. The conservation of this region in vertebrates suggests that the proteolysis of alphaII-spectrin by these enzymes could be involved in important functions. To assess the role of alphaII-spectrin cleavage in vivo, we generated a murine model in which the exons encoding the region defining this cleavage sensitivity were disrupted by gene targeting. Surprisingly, homozygous mice expressing this mutant alphaII-spectrin appeared healthy, bred normally, and had no histological anomaly. Remarkably, the mutant alphaII-spectrin assembles correctly into the membrane skeleton, thus challenging the notion that this region is required for the stable biogenesis of the membrane skeleton in nonerythroid cells. Our finding also argues against a critical role of this particular alphaII-spectrin cleavage in either major cellular functions or in normal development.
ISSN: 0021-9258

inserm-00284621
http://www.hal.inserm.fr/inserm-00284621
http://www.hal.inserm.fr/inserm-00284621/document
http://www.hal.inserm.fr/inserm-00284621/file/Meary_-_JBC_2007.pdf
PUBMED : 17374614

Éditeur(s) : HAL CCSD Springer-Verlag Berlin Heidelberg
Résumé : International audience
Reaction wood produces very peculiar maturation stresses at the tree periphery i.e. compressive stress or very high tensile stress, for compression and tension wood respectively, as compared to moderately high tensile stress for normal wood. This means that both its mechanical state and its mechanical and physical properties differ from normal wood. Compression wood shows big differences from normal wood in conifers, for all physical and mechanical properties: higher density and axial crushing strength (MOR) but lower modulus of elasticity (MOE), far higher axial (longitudinal) shrinkage but lower radial and tangential shrinkage, sometimes even lower than the axial shrinkage. For tension wood things are less simple and can vary a lot from hardwood species to species. Globally there are no systematic differences in density and transverse shrinkage, MOE tends to be a little higher while MOR is slightly lower. However, axial shrinkage is much higher for tension wood with a gelatinous layer (G layer) than normal wood due to the specific gel like organization of cellulose microfibrils in the G layer. For tension wood without a G layer(which is rather frequent) axial shrinkage in the first drying operation is around two times higher than in normal wood mainly because of a kind of hygro-thermal release of locked in maturation stress. Overall the very high tensile stress and stored elastic energy in tension wood lead to problemsin wood processing (end splitting and board warping), which is far less the case for compression wood. But due to the large difference in properties relative to normal wood, compression wood occurrence is always a big problem for the in service behaviour of timber, which is seldom the case for tension wood.
The biology of reaction wood

ISBN : 978-3-642-10813-6
hal-01135273
https://hal.archives-ouvertes.fr/hal-01135273

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
We describe the structure, microstructure, and petrophysical properties of fault rocks from two normal fault zones formed in low-porosity turbiditic arkosic sandstones, in deep diagenesis conditions similar to those of deeply buried reservoirs. These fault rocks are characterized by a foliated fabric and quartz-calcite sealed veins, which formation resulted from the combination of the (1) pressure solution of quartz, (2) intense fracturing sealed by quartz and calcite cements, and (3) neoformation of synkinematic white micas derived from the alteration of feldspars and chlorite. Fluid inclusion microthermometry in quartz and calcite cements demonstrates fault activity at temperatures of 195degC to 268degC. Permeability measurements on plugs oriented parallel with the principal axes of the finite strain ellipsoid show that the Y axis (parallel with the foliation and veins) is the direction of highest permeability in the foliated sandstone (10-2 md for Y against 10-3 md for X, Z, and the protolith, measured at a confining pressure of 20 bars). Microstructural observations document the localization of the preferential fluid path between the phyllosilicate particles forming the foliation. Hence, the direction of highest permeability in these fault rocks would be parallel with the fault and subhorizontal, that is, perpendicular to the slickenlines representing the local slip direction on the fault surface. We suggest that a similar relationship between kinematic markers and fault rock permeability anisotropy may be found in other fault zone types (reverse or strike-slip) affecting feldspar-rich lithologies in deep diagenesis conditions.
ISSN: 0149-1423

hal-00903428
https://hal.archives-ouvertes.fr/hal-00903428
DOI : 10.1306/03071312127

Éditeur(s) : HAL CCSD Geological Society
Résumé : Extensional basins often evolve both with the generation of normal faults at all scales, and with tilting in the hanging walls and footwalls of major structures. This paper examines the effect of regional tilting on the development of normal fault arrays in an anisotropic sequence, using the asymmetric Lodève Basin, France, as a case study. The orientation range of normal faults is found not to match that expected by continued symmetric generation of conjugate normal faults during tilting. Instead, continued generation of new faults preferentially occurred for faults dipping opposite to the direction of tilt, with propagation perpendicular to bedding. The presence of early bedding-perpendicular joints in the competent sandstone units aided propagation of these faults during tilting and this preferential asymmetric development. Bedding-parallel slip surfaces were activated as normal faults during the later stages of bedding tilting, showing complex interaction patterns with later faults downthrowing in the direction opposite to bedding tilting. Hence knowledge of the timing between tilting of the strata and deformation helps in evaluating the likely complexity of fault arrays at subseismic scales in extensional basins, and may also help in understanding the evolution of fault systems in tilted normal fault blocks at the reservoir scale.
ISSN: 0016-7649

hal-00404753
https://hal.archives-ouvertes.fr/hal-00404753
DOI : 10.1144/0016-76492006-047

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The ENE-WSW Autun Shear Zone in the northeastern part of the French Massif Central has been interpreted previously as a dextral wrench fault. New field observations and microstructural analyses document a NE-SW stretching lineation that indicates normal dextral motions along this shear zone. Further east, similar structures are observed along the La Serre Shear Zone. In both areas, a strain gradient from leucogranites with a weak preferred orientation to highly sheared mylonites supports a continuous Autun-La Serre fault system. Microstructural observations, and shape and lattice-preferred orientation document high-temperature deformation and magmatic fabrics in the Autun and La Serre granites, whereas low- to intermediate-temperature fabrics characterize the mylonitic granite. Electron microprobe monazite geochronology of the Autun and La Serre granites yields a ca. 320 Ma age for pluton emplacement, while mica 40Ar-39Ar datings of the Autun granite yield plateau ages from 305 to 300 Ma. The ca. 300 Ma 40Ar-39Ar ages, obtained on micas from Autun and La Serre mylonites, indicate the time of the mylonitization. The ca. 15-Ma time gap between pluton emplacement and deformation along the Autun-La Serre fault system argue against a synkinematic pluton emplacement during late orogenic to postorogenic extension of the Variscan Belt. A ductile to brittle continuum of deformation is observed along the shear zone, with Lower Permian brittle faults controlling the development of sedimentary basins. These results suggest a two-stage Late Carboniferous extension in the northeastern French Massif Central, with regional crustal melting and emplacement of the Autun and La Serre leucogranites around 320 Ma, followed, at 305-295 Ma, by ductile shearing, normal brittle faulting, and subsequent exhumation along the Autun-La Serre transtensional fault system.
ISSN: 1437-3254

insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918/document
https://hal-insu.archives-ouvertes.fr/insu-00596918/file/Article_Morvan_v_INIST.pdf
DOI : 10.1007/s00531-011-0673-z