Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Borborema and Benin–Nigeria provinces of NE Brazil and NW Africa, respectively, are key areas in the amalgamation of West Gondwana by continental collision during the Brasiliano/Pan-African orogenies. Both are underlain by complex basement: Nigeria has c. 3.05 Ga Archaean crust but no known Palaeoproterozoic rocks >2.0 Ga; in NE Brazil, 2.6–3.5 Ga Archaean rocks form small cores within Palaeoproterozoic gneiss terrains affected by plutonism at c. 2.17 Ga. Both regions exhibit Late Palaeoproterozoic (c. 1.8 Ga) rift-related magmatism and metasedimentary sequences overlying the basement. The Seridó Group of NE Brazil (<0.65 Ga) is similar to the Igarra Sequence in SW Nigeria. The Ceará Group, which may date back to c. 0.85 Ga, is a passive margin deposit on crust thinned during initiation of an oceanic domain. In both provinces, basement and sedimentary cover were involved in tangential tectonics that resulted in crust-thickening by nappe-stacking associated with closure of this ocean. Frontal collision between c. 0.66 and 0.60 Ga later evolved to an oblique collision, generating north–south continental strike-slip shear zones at c. 0.59 Ga. In NE Brazil, the main Pan-African suture is probably buried beneath the Parnaíba Basin. The Transbrasiliano Lineament, interpreted as the prolongation of the Kandi–4°50 Lineament in Hoggar, may represent a cryptic suture.
West Gondwana: Pre-cenozoic correlations across the south atlantic region

hal-00412234
https://hal.archives-ouvertes.fr/hal-00412234
DOI : 10.1144/SP294.4

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
Guadeloupe island (West French Indies) is one of the twenty islands that compose the Lesser Antilles arc, which results from the subduction of the Atlantic ocean plate beneath the Caribbean one. The island lies in a complex volcano-tectonic system and the need to understand its geological context has led to numerous on- and offshore geophysical investigations. This work presents a compilation and the processing of available, on-land, airborne and marine, gravity and magnetic data acquired during the last 40 years on Guadeloupe islands and at the scale of the Lesser Antilles arc. The overall dataset provides new Bouguer and reduced to the pole magnetic anomaly maps at the highest achievable resolution. Regionally, the main central negative gravity trend of the arc allows defining two subsident areas. The first one is parallel to the arc direction (~N160°E) to the north, whereas the second unexpected southern one is oriented parallel to oceanic ridges (N130°E). Along the Outer arc, the long wavelength positive anomaly is interpreted, at least along the Karukera spur, as an up-rise of the volcanic basement in agreement with the seismic studies. To the NE of Guadeloupe, the detailed analysis of the geophysical anomalies outlines a series of structural discontinuities consistent with the main bathymetric morphologies, and in continuity of the main fault systems already reported in this area. Based on geophysical evidences, this large scale deformation and faulting of the Outer arc presumably primarily affects the Atlantic subducting plate and secondarily deforms the upper Caribbean plate and the accretion prism, as evidenced in bathymetry as well as on the islands. At the scale of Guadeloupe island, combined gravity and magnetic modeling has been initiated based on existing interpretation of old seismic refraction profiles, with a general structure in three main layers. According to our geophysical anomalies, additional local structures are also modeled in agreement with geological observations: i) the gravity and magnetic signals confirm an up-rise of the volcanic basement below the limestone platforms outcropping on Grande-Terre island ; ii) the ancient volcanic complexes of Basse-Terre island are modeled with high density and reverse magnetized formations; iii) the recent volcanic centre is associated with formations consistent with the low measured density and the underlying hydrothermal system. The E-W models coherently image a NNW-SSE depression structure in half-graben beneath Basse-Terre island, its western scarp following the arc direction in agreement with bathymetric and seismic studies to the north of the island. The so-defined depressed area, and particularly its opening in half-graben toward the SW, is interpreted as the present-day front of deformation of the upper plate, associated with the recent volcanic activity on and around Guadeloupe. Based on this regional deformation model, perspectives are given for further integrated investigation of key targets to address the internal structure and evolution of the Lesser Antilles arc and Guadeloupe volcanic system.
EISSN: 1777-5817

hal-00853352
https://hal.archives-ouvertes.fr/hal-00853352
DOI : 10.2113/gssgfbull.184.1-2.77

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Parentis and Arzacq-Mauleon basins located in front of the V-shaped oceanic propagator in the Bay of Biscay present evidence for extreme crustal thinning. In this paper we investigate the 3D structure of these rift basins, based on field observations and the interpretation of seismic data. We compare these results with those obtained from two different and independent inversion methods: first a 3D gravity inversion and second the standard Euler deconvolution.;For the Mauleon Basin our results show that the positive gravimetric anomaly identified above its southern margin is the consequence of two shallower high density bodies that are separated by the Pamplona fault and a deeper high density body. The high density bodies can be explained by the presence of mid-crustal and mantle rocks that were exhumed or uplifted at shallower depth during Early Cretaceous rifting before they were reworked and integrated to the Pyrenean chain during compression phase. Also, during this reactivation phase, some slices of the exhumed mid-crustal and mantle rocks were sheared off and were integrated in the present-day thrust belt in the Mauleon basin. For the Parentis Basin we can demonstrate, based on seismic data and gravimetric inversion methods, a decrease in extension from west to east, which is compatible with the V-shape geometry of the overall basin. Along strike, a change in the fault geometry from downward concave top-basement detachment faults to upward concave high-angle faults can be observed eastwards, i.e. towards the termination of the basin. A key structure, controlling the evolution of the Parentis Basin, is the east-west trending Ibis fault. We interpret this fault to have initially formed as a strike slip fault before it was reactivated during later crustal thinning. At present, it forms the limit between an upper plate sag basin to the north and a lower plate sag basin, floored at least locally by a top-basement detachment faults to the south. The strong asymmetry of the basin is supported by the shape of the basin and the results of standard Euler deconvolution.
ISSN: 0040-1951

hal-00523444
https://hal.archives-ouvertes.fr/hal-00523444
DOI : 10.1016/j.tecto.2010.04.023

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Dahomey belt in Togo and Benin is an important segment of the larger West Gondwana Orogen. Here, we review the geodynamic evolution of the Dahomey belt and discuss new U–Pb and Lu–Hf zircon data in light of similar data previously acquired on the geologically related Northern Borborema Province, in NE Brazil. Eighteen samples from different tectonic settings and regions within the belt were collected for zircon isotopic investigation. Passive margin deposits of the Atacora Structural Unit and lower units of the Volta Basin have detrital zircon signatures compatible with the flanking West Africa Craton. The arc-related magmatism resulted from the east-dipping subduction of the Goiás-Pharusian oceanic lithosphere and is represented by a variety of granitoids emplaced in the Benino-Nigerian Shield between 670 and 610 Ma. These granitoids were mainly sourced from crustal reservoirs with subordinate juvenile input. Detrital zircon ages from syn-orogenic deposits in Benino-Nigerian Shield suggest that arc development could have started as early as 780 Ma. The main period of melting in the internal part of the belt, the Benino-Nigerian Shield, is related to crustal thickening and occurs only ca. 30 m.y. after initiation of the continental collision, marked by the ca. 610 Ma ultra-high pressure (UHP) metamorphism recorded at Lato Hills. Foreland development represented by the upper units of the Volta basin developed soon after continental collision and persisted with the development of the west-verging thrust front synchronously with the main period of crustal melting due to collision at ca. 580 Ma. The subvertical Transbrasiliano Lineament in South America, that corresponds to the Kandi Lineament in Africa, provides a present-day fit between NW Africa and NE Brazil. Restoration of the movement of the Transbrasiliano-Kandi Lineament (strike-slip plate boundary) places the Dahomey belt and Borborema Province (NE Brazil) along the same section of the West Gondwana Orogen. This configuration would explain some of the misfits previously discussed in the literature and aligns the UHP eclogites in Togo and NE Brazil.
ISSN: 0301-9268

hal-01358584
https://hal.archives-ouvertes.fr/hal-01358584
DOI : 10.1016/j.precamres.2016.01.032

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper focuses on the analyses of the clastic sedimentary infill of the Coastal Plain of Eastern Mexico, which initiated synchronously with the Laramide orogeny in the vicinity of the Golden Lane. Results of these analyses are used as boundary conditions for calibrating/interpreting seismic profiles across more distal depocenters in the offshore of the Gulf of Mexico, from the sea shore and continental slope in the west to the abyssal plain in the east. The objective of the study is to better predict the reservoir distribution in the Deep offshore Basin of the Gulf of Mexico (DBGM), in order to explore for petroleum. The Coastal Plain is underlain by three morpho-tectonic domains: the tectonic front of the Sierra Madre Orientale (SMO), the Chicontepec deep water flexural basin, and the Tuxpan Platform (also known as the Golden Lane). Each domain is characterized by a distinct, dominantly siliciclastic Cenozoic lithostratigraphy. After a Jurassic rifting episode, followed by thermal subsidence, the oceanic basin and its western passive margin were deformed during the Upper Cretaceous and Paleogene, by far field stresses associated with the Cordilleran-Laramide Orogeny. Starting in the Late Cretaceous-Early Paleogene and during the Early Eocene, the tectonic load associated with the Laramide Orogen (Sierra Madre Oriental, SMO) caused flexural subsidence of the foreland located under the Coastal Plain. During this period, a massive transfer of siliciclastic sediments occurred from the Laramide foothills into the adjacent foreland. Sediments were eroded of the Sierra Madre tectonic wedge. Loading by these sediments pushed source units associated with the former passive margin down ward. The first syn-tectonic sediments of the Laramide orogeny were turbiditic silt layers in submarine fans which record also numerous collapse episodes and gravity slides. During the Late Eocene and Oligocene, the flexural subsidence stopped in the hinterland, whereas the subsidence of the passive margin resumed. This resulted in a change in the overall sedimentary architecture of the basin. Paleo-highs and reefs facies of the Golden Lane were flooded. Clastics by-passed the reefs and progradational clastic stratification formed as sediment moved towards the DBGM in the east. The final depositional environment of the continental platform/Coastal Plain became deltaic, marked by a succession of sand bars, levees and channels systems. From Miocene times onward, a system of gravitational listric faults developed near the platform to slope transition, resulting in a coeval compressional system at the transition between the slope and the abyssal plain. This system is driven by sediments charge. Because the sedimentation rate is larger than the subsidence, a large amount of clastics and slumped sediments are deposited in hangingwall basins.
ISSN: 0264-8172

hal-00424586
https://hal.archives-ouvertes.fr/hal-00424586
DOI : 10.1016/j.marpetgeo.2008.03.009

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Despite convergent margins being unstable systems, most reports of huge submarine slope failure have come from oceanic volcanoes and passive margins. Swath bathymetry and seismic profiles of the northern Hikurangi subduction system, New Zealand, show a tapering 65-30 km wide by 65 km deep margin indentation, with a giant, 3150+_630 km 3, blocky, debris avalanche deposit projecting 40 km out across horizontal trench fill, and a debris flow deposit projecting over 100 km. Slide blocks are well-bedded, up to 18 km across and 1.2 km high, the largest being at the avalanche deposit's leading edge. Samples dredged from them are mainly Miocene shelf calc-mudstones similar to those outcropping around the indentation. Cores from cover beds suggest that failure occurred-170 +_40 ka, possibly synchronously with a major extension collapse in the upper indentation. However, the northern part of the indentation is much older. The steep, straight northern wall is close to the direction of plate convergence and probably formed around 2.0-0.16 Ma as a large seamount subducted, leaving in its wake a deep groove obliquely across the margin and an unstable triangle of fractured rock in the 60 ø angle between groove and oversteepened margin front. The triangle collapsed as a blocky avalanche, leaving a scalloped southern wall and probably causing a large tsunami. Tentative calculations of compacted volumes suggest that the indentation is over 600 km 3 larger than the avalanche, supporting a two-stage origin that includes subduction erosion. Since failure, convergence has carried the deposits-9 km back toward the margin, causing internal compression. The eventual subduction/accretion of the Ruatoria avalanche explains the scarcity of such features on active margins and perhaps the nature of olistostromes in fold belts.
ISSN: 2169-9275

hal-01261406
https://hal.archives-ouvertes.fr/hal-01261406
https://hal.archives-ouvertes.fr/hal-01261406/document
https://hal.archives-ouvertes.fr/hal-01261406/file/CollotJGR2001.pdf
DOI : 10.1029/2001JB900004

Éditeur(s) : Université de Bretagne Occidentale
Résumé : Le plateau des Açores est une région volcanique située à 38°N-30°W dans l'océan Atlantique nord. Il se trouve à une profondeur d'eau moyenne comprise entre 1000 et 2000 mètres et se caractérise par la présence de 8 îles volcaniques, d'une dizaine de petits segments de dorsale et par une activité hydrothermale. Il constitue une triple limite de plaque entre l'Amérique, l'Europe et l'Afrique. L'éloignement des continents et sa localisation dans le gyre subtropical en font, vis à vis de l'Atlantique nord, une région à faibles apports terrigènes et biogènes. Il se situe également au sud de limite d'extension du front polaire (42°N) lors des époques glaciaires, et n'est pas soumis à la forte variabilité climatique de l'Atlantique nord.

Droits : UBO
http://archimer.ifremer.fr/doc/00034/14505/11847.pdf
http://archimer.ifremer.fr/doc/00034/14505/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Carbonation of peridotite is a widespread process in nature, with emerging societal and environmental implications through geological storage of CO2. We studied the micro- and nano-scale structures associated with the carbonation of peridotite pervaded by a CO2-rich water and the induced changes of its hydrodynamic properties. Focused ion beam (FIB) nanotomography was coupled with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. An experimental sample of dunite core percolated by a CO2-rich fluid (pCO2 = 11 MPa) at 160 °C was compared with a naturally carbonated sample from the Atlantic Ridge (Exp. IODP 304). Results of the 8-days percolation experiment show continuous alteration of olivine into magnesite locally associated with a poorly crystalline serpentine-type mineral referred to as proto-serpentine. The experiment is also characterized by an overall decrease in rock porosity (from 7.7 to 6.4%) and permeability (from 8.5 × 10− 16 to 1.7 × 10− 16 m2). The primary inter-granular porosity (1 to 10 μm) is progressively filled with magnesite, leading to the overall decrease of permeability. At the same time, a secondary small-scale porosity (10 nm to 1 μm) is created at the tip of the dissolution features along the (010) cleavage planes of olivine grains. Carbonate crystals grow within these etch-pit structures behind the dissolution front. Dissolution and precipitation occur at a relative rate that maintains the secondary porosity over the timescale of the experiment (i.e. carbonate growth has to be the slowest one). This process is interpreted as an interface coupled dissolution-precipitation mechanism of olivine carbonation. Proto-serpentine is only formed in highly reduced flow areas, such as small olivine etch-pits (10 to 500 nm wide), which are more isolated from CO2 input. SEM-FIB analyses show the 3D preferential orientation of the dissolution-precipitation planes within a given olivine grain. It suggests the formation of lateral connections between the etch-pits (infra-micrometric “channels”) providing access to reactants and removing reaction products at the reaction sites. The experimental results show that olivine dissolution and magnesite precipitation converge to a quasi-steady state resulting in a constant carbonation rate controlled by reaction kinetics and not by mass transfer for this flow regime. The system self-regulates, independently of the porosity change at least during this incipient stage of olivine carbonation. Similar textures are observed in natural samples collected at 170 m-depth in the vicinity of veinlets driving late fluids down into the cooling oceanic lithosphere. This suggests that similar mechanisms are active in nature and can play an important role in the late, low temperature alteration stages of fractured peridotite. These results also highlight the critical role of nm-scale spatial arrangement of dissolution and precipitation features on mass transfers and on the sustainability of olivine carbonation through coupled dissolution-precipitation processes.
ISSN: 0009-2541

hal-01684733
https://hal.archives-ouvertes.fr/hal-01684733
DOI : 10.1016/j.chemgeo.2017.11.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : Carbon emission at volcanic centers requires a constant balance between output (mostly by volcanism, either at plate boundaries or intraplate) and input (mostly at trench settings) of carbon from and to the Earth's mantle. The form of carbon that resides in the mantle is controlled by depth (pressure) and oxygen fugacity, the latter in turn depending on the depth and the concentration of iron in the mantle. In the shallow, lithospheric mantle, carbon is likely to be present in the oxidized form of CO2 (except under cratons where carbon is reduced to graphite or diamond). Below approximately 90 km, in the asthenosphere, the oxidized form of carbon is carbonate, either mineral or melt, depending on the thermal regime. At depths greater than approximately 150 km, the asthenospheric mantle is too reducing for carbon to stay in its oxidized form and only diamond is present, unless there is sufficient hydrogen to form reduced C–H fluids. Hence, the region located in the depth range of 90 to 150 km deep is where carbonatitic melts can most likely be produced and impregnate the surrounding mantle through metasomatism. The upper bound of this region is called the carbonate ledge. This limit prevents carbonate (either solid or molten) from ascending because of degassing and CO2 liberation. The lower bound is a redox front where redox melting (that is, melting caused by oxidation) may take place in an ascending portion of carbon-containing mantle. Carbonatite eruptions and presence of carbonate mineral inclusions in deep-seated diamonds provide evidence that these boundaries can be trespassed in some cases.An analysis of the experimental data that has bearing on silicate melting in the presence of carbon further shows that the carbonate ledge is a melting curve with a negative or flat Clapeyron (dP/dT) slope. In the carbonated ultrabasic (peridotite) systems, the carbonate ledge is located between ~ 2–3 GPa. The ledge divides the pressure–temperature space into a region of low-pressure silicate melt production, and a high-pressure region where carbonatites can be produced. Carbonatitic melts in equilibrium with mantle peridotite have compositions close to dolomitic (approximately equal amounts of Ca and Mg) with a general trend of becoming markedly more magnesian with increasing pressure. Calcic carbonatites may be stable at pressures < 2 GPa if clinopyroxene is absent. At mantle transition zone pressure range, there seems to be a melting temperature decrease (negative fusion slope), which may be caused by the stabilization of majoritic garnet.The carbonated basic (broadly eclogitic) system is more complex than the peridotitic one, because of the strong control of bulk silicate composition on melting temperatures, and hence, on melt composition. In carbonated eclogite systems, we propose that the effect of bulk composition upon all observed features can perhaps be related to silica super-saturation, or lack thereof. In some cases, high calcium (> 80 mol% CaCO3) melts can be produced, making the melting of carbonated eclogites an appealing scenario for the genesis of calcio-carbonatites in the Earth's mantle. Comparison with modeled pressure–temperature paths of subducted oceanic lithosphere shows that fusion of carbonated eclogite at depths shallower than 200 km should be expected for hot (Cascadian-type) subduction thermal regimes. On the other hand, in the case of cooler thermal regimes (Honshu-type, for instance), subducted carbonates may be stable to greater depths in Earth at trench settings, depending on the bulk composition of the system.Furthermore, high-pressure experiments show evidence of a continuum among carbonatitic, kimberlitic, melilititic, and basaltic liquids, for increasing melting degree of carbonated peridotite. This continuum has not been documented in the case of fusion of carbonated eclogite. It may be present, however, when certain sediments are fused, although the silicate melts are granitic to rhyodacitic instead of being kimberlitic in composition. Additional high-pressure work on phase relations in the simple binary system CaCO3–MgCO3 and specific focus on oxide solubility in the vapor phase have the potential to further clarify phase relations on complex silicate–carbonate systems at mantle conditions.
ISSN: 0009-2541

hal-01277770
https://hal.archives-ouvertes.fr/hal-01277770
DOI : 10.1016/j.chemgeo.2015.05.018