Éditeur(s) : HAL CCSD American Chemical Society
Résumé : The distribution of water and ions in nanoporous membranes, in particular close to their surfaces with external reservoirs, is investigated by means of molecular dynamics (MD) simulations using classical polarizable force fields. A sodium iodide (NaI) aqueous solution is considered in uncharged weakly hydrophilic (WH) and highly hydrophilic (HH) nanoporous materials modeled by a single truncated nanopore in contact with two reservoirs. In the inner part of the nanopore, the spatial distribution of water and ions is obtained by coupling semi-infinitesimal longitudinal and semi-infinitesimal radial descriptions. In the HH material, in contrast with the WH material, species are no longer uniformly distributed in the inner nanopore and water molecules are distributed in a nearly frozen axially periodic corona-like structure which leads to the formation of ionic tunnels. In the reservoirs, water molecules and ions attracted by the membrane surface create a necking of the confined solution which acts as a barrier at the entrance of the nanopore. In the WH nanopore subsurface, close to the surface of the membrane, the species distribution is analogous to the interface distribution between an aqueous electrolyte solution and air. In the HH nanopore subsurface, this distribution is modulated by the water corona-like structure. These results provide useful information for predicting properties of nanoporous membranes, in particular the drastic reduction of diffusion coefficients in HH materials, and give a guide to designing synthetic membranes for applications in nanofiltration, etc.
ISSN: 1932-7447

hal-00682155
https://hal.archives-ouvertes.fr/hal-00682155
DOI : 10.1021/jp2078924

Éditeur(s) : HAL CCSD
Résumé : International audience
—Managing spatial reservoirs of malaria infection plays a crucial role in effective disease control. In this paper, a reservoir of infection refers to one or more interconnected subpopulations that sustain the epidemic at the level of the metapopulation to which applying a (linear) control strategy suffices to eradicate the disease in the whole system. We propose a numerical method to explain the steps for identifying reservoirs of malaria infection within n connected regions with the explicit movement of human population from the previous theoretical results in order to design an efficient computational tool. Furthermore, we determine the minimal percentage (critical vaccination fraction) of susceptible individuals in the reservoirs that should be protected to eliminate malaria. The costs and cost-effectiveness of malaria control interventions were analysed considering two strategies of control. (i) protecting the minimal fraction of susceptible individual; (ii) protecting any fraction greater than the minimal fraction. Cost-effectiveness analysis shows that the less cost and more effective strategy is to vaccinate (or protect) the minimal fraction of susceptible human in the reservoir of infection to halt outbreak. A numerical example provides insight into the efficiency of this approach.
IAENG International Journal of Applied Mathematics

Droits : info:eu-repo/semantics/OpenAccess
hal-01683800
https://hal.univ-antilles.fr/hal-01683800
https://hal.univ-antilles.fr/hal-01683800/document
https://hal.univ-antilles.fr/hal-01683800/file/ZongoDorvilleGouba28Janvier2017.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Sedimentary rocks and detrital minerals sample large areas of the continental crust, and they are increasingly seen as a reliable archive for its global evolution. This study presents two approaches to model the growth of the continental crust through the sedimentary archive. The first builds on the variations in U-Pb, Hf and O isotopes in global databases of detrital zircons. We show that uncertainty in the Hf isotope composition of the mantle reservoir from which new crust separated, in the 176Lu/177Hf ratio of that new crust, and in the contribution in the databases of zircons that experienced ancient Pb loss(es), adds some uncertainty to the individual Hf model ages, but not to the overall shape of the calculated continental growth curves. The second approach is based on the variation of Nd isotopes in 645 worldwide fine-grained continental sedimentary rocks with different deposition ages, which requires a correction of the bias induced by preferential erosion of younger rocks through an erosion parameter referred to as K. This dimensionless parameter relates the proportions of younger to older source rocks in the sediment, to the proportions of younger to older source rocks present in the crust from which the sediment was derived. We suggest that a Hadean/Archaean value of K = 1 (i.e., no preferential erosion), and that post-Archaean values of K = 4–6, may be reasonable for the global Earth system. Models built on the detrital zircon and the fine-grained sediment records independently suggest that at least 65% of the present volume of continental crust was established by 3 Ga. The continental crust has been generated continuously, but with a marked decrease in the growth rate at ~ 3 Ga. The period from > 4 Ga to ~ 3 Ga is characterised by relatively high net rates of continental growth (2.9–3.4 km3 yr− 1 on average), which are similar to the rates at which new crust is generated (and destroyed) at the present time. Net growth rates are much lower since 3 Ga (0.6–0.9 km3 yr− 1 on average), which can be attributed to higher rates of destruction of continental crust. The change in slope in the continental growth curve at ~ 3 Ga is taken to indicate a global change in the way bulk crust was generated and preserved, and this change has been linked to the onset of subduction-driven plate tectonics. At least 100% of the present volume of the continental crust has been destroyed and recycled back into the mantle since ~ 3 Ga, and this time marks a transition in the average composition of new continental crust. Continental crust generated before 3 Ga was on average mafic, dense, relatively thin (< 20 km) and therefore different from the calc-alkaline andesitic crust that dominates the continental record today. Continental crust that formed after 3 Ga gradually became more intermediate in composition, buoyant and thicker. The increase in crustal thickness is accompanied by increasing rates of crustal reworking and increasing input of sediment to the ocean. These changes may have been accommodated by a change in lithospheric strength at around 3 Ga, as it became strong enough to support high-relief crust. This time period therefore indicates when significant volumes of continental crust started to become emergent and were available for erosion and weathering, thus impacting on the composition of the atmosphere and the oceans.
ISSN: 0037-0738

hal-01622696
https://hal.archives-ouvertes.fr/hal-01622696
DOI : 10.1016/j.sedgeo.2017.06.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A set of four reactive flow-through experiments at temperature T = 100 degrees C and total pressure P=12 MPa was performed in limestone reservoir samples. By using various ranging from 0.7 to 10 MPa, these experiments mimic mass transfers occurring (1) near the injection well, where the brine is almost saturated with CO2 (i.e. P-CO2 approximate to P), and (2) at increasing distances from the injection well, where the fluid displays lower values and higher divalent cation concentrations due rock dissolution along the fluid pathway. Results for P-CO2 = 10 MPa show non-uniform dissolution features associated with transport-controlled mass transfer, while reaction-controlled uniform dissolution is observed for P-CO2 = 2.5 MPa. The experiment with P-CO2 = 6 MPa allows investigating in detail the transition from transport-to reaction-controlled dissolution. Conversely, the experiment reproducing conditions far from the injection well (P-CO2 = 0.7 MPa), shows a decrease of porosity triggered by the precipitation of Mg-rich calcite. For all the dissolution experiments, the time-resolved porosity phi(t) can be modeled by a simple non-linear equation including parameters that characterise the dissolution regime triggered by the reactivity of the inlet fluid (measured by the Damkohler number, Da). Furthermore, all dissolution experiments display power scaling between permeability (k) and porosity (phi) with distinctly different scaling exponents characterising the reactivity of the fluid percolating the sample, independently from the decrease with time of the reactive surface area. It is shown also that dissolution at moderate positive values of Da seems the most efficient to increase permeability and promote a rapid spreading of the reaction front, while inducing minimal modification of the porosity in the vicinity of the CO2 injection well. These results can be used to parameterize the k-phi function for modeling the earliest dissolution processes occurring in the vicinity of the reaction front.
ISSN: 0009-2541

hal-00445277
https://hal.archives-ouvertes.fr/hal-00445277
DOI : 10.1016/j.chemgeo.2009.03.028

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : Permo-Triassic rift basins offer important hydrocarbon targets along the Atlantic margins. Their fill is dominated by continental red beds, comprising braided fluvial, alluvial fan, aeolian, floodplain and lacustrine facies. These relatively lightly explored basins span both the Atlantic and Tethyan domains and developed above a complex basement with inherited structural fabrics. Sparse data in offshore regions constrain understanding of depositional geometries and sedimentary architecture, further impeded by their deep burial beneath younger strata, combined with the effects of later deformation during continental breakup. This paper provides results from a multidisciplinary analysis of basins along the Atlantic margin. Regional seismic and well data, combined with geochemical provenance analysis from the European North Atlantic margins, are integrated with detailed outcrop studies in Morocco and Nova Scotia. The research provides new insights into regional basin tectonostratigraphic evolution, sediment fill, and reservoir distribution, architecture and quality at a range of scales. Regional seismic profiles, supported by key well data, indicate the presence of post-orogenic collapse basins, focused narrow rifts and low-magnitude multiple extensional depocentres. Significantly, Permo-Triassic basin geometries are different and more varied than the overlying Jurassic and younger basins. Provenance analysis using Pb isotopic composition of detrital K-feldspar yields new and robust controls on the sediment dispersal patterns of Triassic sandstones in the NE Atlantic margin. The evolving sedimentary architecture is characterized by detailed sedimentological studies of key outcrops of age equivalent Permian-Triassic rifts in Morocco and Nova Scotia. The interplay of tectonics and climate is observed to influence sedimentation, which has significant implications for reservoir distribution in analogue basins. New digital outcrop techniques are providing improved reservoir models, and identification of key marker horizons and sequence boundaries offers a potential subsurface correlation tool. Future work will address source and seal distribution within the potentially petroliferous basins.
Petroleum Geology: From Mature Basins to New Frontiers Proceedings of the 7th Petroleum Geology Conf

hal-00590618
https://hal.archives-ouvertes.fr/hal-00590618

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Serpentinites form by hydration of mantle peridotite and constitute the largest potential reservoir of fluid-mobile elements entering subduction zones. Isotope ratios of one such element, boron, distinguish fluid contributions from crustal versus serpentinite sources. Despite 85% of boron hosted within abyssal peridotite being lost at the onset of subduction at the lizardite-to-antigorite transition, a sufficient cargo of boron to account for the composition of island arc magma is retained (c. 7 μg g− 1, with a δ11B of + 22‰) until the down-going slab reaches the antigorite-out isograd. At this point a 11B-rich fluid, capable of providing the distinctive δ11B signature of island arc basalts, is released. Beyond the uniquely preserved antigorite-out isograd in serpentinites from Cerro del Almirez, Betic Cordillera, Spain, the prograde lithologies (antigorite–chlorite–orthopyroxene–olivine serpentinite, granofels-texture chlorite-harzburgite and spinifex-texture chlorite-harzburgite) have very different boron isotope signatures (δ11B = − 3 to + 6‰), but with no significant difference in boron concentration compared to the antigorite-serpentinite on the low P–T side of the isograd. 11B-rich fluid, which at least partly equilibrated with pelagic sediments, is implicated in the composition of these prograde lithologies, which dehydrated under open-system conditions. Serpentinite-hosted boron lost during the early stages of dehydration is readily incorporated into forearc peridotite. This, in turn, may be dragged to sub-arc depths as a result of subduction erosion and incorporated in a mélange comprising forearc serpentinite, altered oceanic crust and pelagic sediment. At the antigorite-out isograd it dehydrates, thus potentially providing an additional source of 11B-rich fluids.
ISSN: 0009-2541

hal-01172276
https://hal.archives-ouvertes.fr/hal-01172276
DOI : 10.1016/j.chemgeo.2014.03.015

Éditeur(s) : HAL CCSD
Résumé : Fault zones are major discontinuities in sedimentary basins. Understanding their role on fluid migrations is an essential issue to (i) characterize the mechanisms and kinematics of deformation and (ii) to determine the parameters which control the distribution of energetic or mineral resources. This work applies to faulting under a temperature range of 200-250°C, corresponding to that of deeply buried reservoirs as well as potentially seismogenic fault zones. The studied faults are normal faults affecting the “Grès d’Annot” Formation, a Priabonian-Rupelian siliclastic turbidite succession of the Alpine foreland basin. They are located in two distinct areas: the Moutière-Restefond area in the eastern part of the basin and the Estrop area in the western part. Vitrinite reflectance outside fault zones indicates maximal temperatures of 240-260°C at Moutière-Restefond and 170-200°C at Estrop, i.e. burial depths around 8 km and 6 km, respectively, assuming a mean geothermal gradient of 30°C/km. Burial was due to underthrusting below the Embrunais-Ubaye Alpine nappes, the difference in burial between the two areas traducing the westward taper of the nappe front.The studied faults affect alternating arkosic sandstone beds and pelite layers with offsets from centimeters to decameters. Two types of core zones are recognized: (1) the foliated core zones of the Moutière-Restefond area, where deformation dominated by pressure solution and synkinematic phyllosilicate neoformation resulted in a foliated fabric, and (2) the core zones of the Estrop area, characterized by dilatant quartz-mineralized veins and breccia. Fault and host rock petrophysical properties were measured on drill plugs, using the water porosity technique and nitrogen permeability technique under 2 Mpa of confining pressure. In the Moutière-Restefond fault zones, plug axes were oriented in three orthogonal directions corresponding to the main deformation axes (X, Y, Z) of the foliated arkose to characterize the effect of structural anisotropy. In the Estrop fault zones, where deformation does not show equivalent anisotropy, the plug axes were oriented according to the main fault plane orientation (i.e., parallel to azimuth, parallel to dip and normal). In each fault zone, the porosity of fault rocks is equivalent to that of host rocks. In the Moutière-Restefond fault zones, the plugs parallel to the X and Z axes of deformation have a permeability similar to that of the host rocks, whereas permeability parallel to the Y axis (i.e. parallel to the foliation and the main fault plane) is one order of magnitude higher. By contrast, the permeability values in the Estrop fault zones are isotropic and equivalent to the host rock values. This study highlights the importance of various types of deformation mechanisms and related fluid-rock interactions in determining different fault rock types within a similar protolith, ultimately controlling distinct petrophysical properties of fault zones.
Les zones de failles constituent des discontinuités majeures dans la croûte supérieure. Ce mémoire s’intéresse aux failles actives à des profondeurs de 5-8 km, i.e. dans des conditions pouvant jouer un rôle important (i) sur le comportement mécanique de de la croûte, en particulier sur son potentiel sismogénique et (ii) sur la compartimentation des réservoirs géologiques profondément enfouis.Les failles étudiées sont des failles normales (rejet jusqu’à 50 mètres) affectant des alternances de bancs de grès arkosiques et de pélites dans les Grès d’Annot, une formation turbiditique d’âge priabonien-rupélien du bassin d’avant-chaine alpin. Les Grès d’Annot ont été enfouis sous les nappes de l’Embrunais-Ubaye peu de temps après leur dépôt et exhumés au Miocène moyen-supérieur. L’étude a été réalisée dans deux secteurs des Alpes de Haute-Provence, (1) le secteur de l’Estrop (chaine des Trois Evéchés, dans la partie occidentale du bassin) et (2) le secteur de Point Vert-Restefond (alentours du col de la Bonette, dans la partie orientale du bassin). La réflectance de la vitrinite dans les Grès d’Annot indique des températures maximales de 160-190°C dans le secteur (1) et de 240-260 °C dans le secteur (2) , soit des profondeurs d’enfouissement de 5-6 km et 8-10 km, respectivement, dans l’hypothèse d’un gradient géothermique moyen de 25-30°C/km. A partir des observations microstructurales, de données d’inclusions de fluides, de modélisations thermodynamiques sur chlorites syncinématiques et des indices de cristallinité de l’illite, on a établi que les failles du secteur (1) ont fonctionné à une température d’environ 200°C pour une pression de 0.6Kbar et celles du secteur (2) dans une gamme de température de 200-220°C et de pression comprise entre 0.6 et 1.1 Kba. L’activité de la faille de Point-Vert a été datée par la méthode 40Ar/39Ar au Miocène inférieur (21 Ma). Ces failles sont interprétées comme associées aux premiers stades du soulèvement résultant de l’activité des chevauchements dans le socle sous-jacent.Deux types principaux de roches de failles caractérisent les failles étudiées. Les brèches dilatantes sont majoritaires dans les zones de failles du secteur (1) alors que les arkoses foliées sont majoritaires dans les zones de failles du secteur (2). Les brèches dilatantes témoignent de mécanismes de déformation dominés par la fracturation transgranulaire et la pression-solution des silicates. Ce dernier mécanisme se manifeste principalement par d’abondantes précipitations cycliques de quartz, les stylolites restant peu développés. Les géométries structurales sont associées à l’activation de plans T de Riedel déterminant l’ouverture de relais extensifs et un régime localement dilatant. Nous associons ce type de roche de faille à une faible pression effective au cours de la déformation.La déformation cisaillante exprimée dans les arkoses foliées témoigne de mécanismes de déformation dominés par (i) la fracturation intragranulaire et transgranulaire, (ii) la pressionsolution/ précipitation des silicates, principalement le quartz, (iii) la néoformation de micas blancs liée à l’altération des feldspaths et (iv) la précipitation de chlorite. Ce travail montre également que les transformations minéralogiques liées aux interactions fluide-roche dans la zone de faille (forte augmentation de la proportion des phyllosilicates au dépend des feldspaths) changent radicalementla composition minéralogique de la roche. Nous associons ce type de roche de faille à une forte pression effective au cours de la déformation.La pétrophysique montre que les brèches de failles (secteur 1) ont une perméabilité isotrope et équivalente à celle du protolithe (10-3mD sous 2 MPa de confinement) tandis que les roches foliées (secteur 2) montrent une augmentation de perméabilité (10-2mD) selon l’axe Y de la déformation, d’un ordre de grandeur supérieure aux perméabilités suivant les axes X et Z et dans la roche hôte (10-3mD). Ce drain préférentiel potentiel est associé à l’orientation des phyllosilicates dans la foliation.
https://hal.archives-ouvertes.fr/tel-01310382

tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382/document
https://hal.archives-ouvertes.fr/tel-01310382/file/Th%C3%A8seCAVAILHES2012.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD
Résumé : This study is designed to improve the understanding of structural, mechanical and petrophysical characteristics of deformation bands in porous sandstone such as their potential influence on fluid storage or migration in reservoir setting. Structural and petrophysical analysis of band networks from Provence show that permeability of band is mainly controlled by the degree of cataclasis and diagenetic processes at depth. Map-scale analysis of band networks underlines the major influence of tectonic regime on band distribution, organization and permeability. Band associated to normal-fault regime (cataclasis and low-permeability) are located around map-sclae-fault whereas band associated to thurst-fault regime (moderate cataclasis and permeability) are pervasively distributed in all the area. Reverse-sense band are cataclastic and low-permeabiilty around the Roquemaure thrust, which show the potential role of large-scale fault on structural and petrophysical characteristics of bands. This analysis also shows the influence of fault propagation on formation of low permeability catacastic bands. This analysis suggests also granulometry as factor controlling organization of band networks.A mechanical analysis of deformation bands is realized based on results from Provence. Yield envelopes of these materials are calculated from analytical solution. Triaxial tests done on sandstone (L'Etang quarry, Orange) confirm the shape of yield envelope theoretically calculated. Triaxial tests done on the poorly-lithified sands (Boncavaï quarry, Uchaux) show grain size, sorting and packing influencing yield envelope and cataclastic band localization at shallow burial depth. Stress paths are calculated for burial and tectonic event (extension and contraction) using the relationship between main stress and secondary stresses (K0) calibrated from well data. These different results are integrated into a model which allows to estimate type and structural characteristics of bands susceptible to form for a known geological setting.A structural, mechanical and petrophysical model is established form these results. This model is calibrated by permeability data from deformation bands of Provence and results from the mechanical model of strain localization. This model is also confronted to a synthesis of permeability data from literature, which confirms the influence of the different controlling parameters integrated to the model. This model is applied for two sites of uranium exploration/exploitation in porous sandstone reservoirs and validated by field observations.
Cette étude est destinée à améliorer la compréhension des caractéristiques structurales, pétrophysiques et mécaniques des bandes de déformation dans les grès poreux ainsi que de leur rôle potentiel sur la migration ou le piégeage des fluides en milieu réservoir. L'analyse structurale et pétrophysique des réseaux de bandes de Provence montre que leur perméabilité découle principalement de l'intensité de la cataclase dans leur microstructure et des processus diagénétiques qui peuvent s'y localiser avec la profondeur. L'analyse régionale de ces réseaux de bandes souligne l'influence majeure du régime tectonique sur leur distribution, leur organisation et leur perméabilité. Les bandes associées au régime normal (cataclactiques et peu perméables) sont localisées autour des failles cartographiques, tandis que les bandes associées au régime inverse (modérement cataclastiques et perméables) sont distribuées dans toute la région. Les bandes inverses sont fortement cataclastiques et imperméables uniquement autour du chevauchement de Roquemaure ce qui montre le rôle potentiel de la présence de grande faille sur les caractéristiques structurales et pétrophysiques de ces bandes. D'autre part, cette analyse suggère que la granulométrie de l'encaissant peut influencer l'initiation et l'organisation des réseaux. L'analyse mécanique des bandes de déformation a ensuite été réalisée à partir des résultats obtenus en Provence. L'enveloppe de plasticité de ces matériaux est calculée à l'aide d'une solution analytique. Les essais triaxiaux menés sur le grès de la carrière de l'Etang (orange) confirment la forme de ces enveloppes estimées théoriquement. Les essais réalisés sur les sables de Boncavaï (Uchaux) montrent que la taille des grains, le tri et de la compaction dans ces matériaux peu lithifiés influent sur leurs enveloppes de plasticité et la localisation des bandes cataclastiques à faibles profondeurs. Les trajets de contraintes sont estimés pour les phases d'enfouissement et de chargement tectonique (extension et compression) à partir de la relation entre contrainte principale et contraintes secondaires (K0), calibrée à partir de données de forage. Ces résultats sont intégrés à un modèle permettant d'estimer la nature et les caractéristiques structurales des bandes susceptibles de se former dans un contexte géologique donné. Un modèle structural, mécanique et pétrophysique a été établir à partir de ces différents résultats. Ce modèle est calibré à partir des données de perméabilité mesurées sur les bandes de Provence et des résultats du modèle mécanique de localisation cité précédemment. Ce modèle a ensuite été confronté à une synthèse des données de perméabilité disponibles dans la littérature et confirme l'influence des différents paramètres de contrôle pris en compte dans le modèle. Ce modèle a enfin pu être appliqué sur deux sites d'explorations/exploitations d'uranium en réservoir gréseux poreux et validé par les résultats obtenus, en concordance avec les observations de terrain.
https://tel.archives-ouvertes.fr/tel-01001389

NNT : 2013MON20067
tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389/document
https://tel.archives-ouvertes.fr/tel-01001389/file/36072_BALLAS_2013_archivage-1_cor.pdf

Éditeur(s) : HAL CCSD
Résumé : In coastal carbonate aquifers submitted to a saline intrusion, water - rock interactions processes at the interface between freshwater and saltwater are a cause for heterogeneities development within the porous media. The dissolutions and precipitations induced by the mixing zone play a major role in the transport properties of the reservoir and so in the long term evolution of the saltwater intrusion. The characterization and the in situ observation of a current saline intrusion in the Llucmajor carbonate platform at the experimental site of Ses Sitjoles (South-Easth of Mallorca Island, Spain), allowed to study the temporal evolution of the saltwater intrusion and the biogeochemical processes active in the mixing zone. The influence of microstructure, characterized using X-Ray microtomography, on the petrophysical and flow properties was investigated in laboratory and flow-through experiments were also conducted to study the modifications of the microstructures when submitted to water - rock interactions processes. The mixing zone at the Ses Sitjoles site appears as quite thick and not very sensitive to climate and anthropic stress and is proved to be the locus of active microbiological activity. Laboratory studies highlight a strong control of the microporosity on transport processes and of pCO2 on water - rock interactions. The percolation experiments of slightly reactive waters reveal calcite dissolution together with a decrease in permeability due to a rearrangement of micro-grains within the microporous network.
Les processus d'interactions fluide-roche à l'interface eau douce-eau salée, dans les aquifères carbonatés côtiers soumis à une intrusion saline, sont une des causes du développement d'hétérogénéités dans la structure du milieu poreux. Les dissolutions et/ou précipitations engendrées par la présence de cette zone de mélange jouent un rôle déterminant pour les propriétés de transport du réservoir et donc l'évolution à long terme de l'intrusion d'eau salée. En prenant l'exemple de la plateforme carbonatée de Llucmajor au niveau du site expérimental de Ses Sitjoles (Sud-Est de Majorque, Espagne), un travail de caractérisation et d'observation in situ à moyen terme de l'intrusion saline actuelle de ce réservoir permet de décrire son évolution temporelle et les processus biogéochimiques actifs dans la zone de mélange. L'influence de la microstructure du milieu poreux, caractérisée par microtomographie RX, sur les propriétés pétrophysiques et hydrodynamiques est étudiée en laboratoire et des expériences de percolations d'eaux réactives (mélanges eau douce - eau salée et eau pure chargée en CO2) sont réalisées afin d'étudier les modifications de ces microstructures lorsqu'elles sont soumises à des interactions eau - roche. La zone de mélange eau douce - eau salée rencontrée au niveau du site de Ses Sitjoles est large et peu sensible aux contraintes extérieures (climatologiques et anthropiques) et constitue un lieu d'activité microbiologique particulièrement actif. En laboratoire, on observe un fort contrôle des phénomènes de transport par la microporosité et des processus d'interactions eau - roche par la pCO2. Dans le cas d'une percolation de fluides moyennement réactifs, les expériences mettent en évidence une dissolution de calcite accompagnée par une diminution de la perméabilité, liée à un réarrangement des micro-grains à l'intérieur du réseau microporeux.
https://tel.archives-ouvertes.fr/tel-00767152

tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152/document
https://tel.archives-ouvertes.fr/tel-00767152/file/thesegaring.pdf

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The magmatology of Mount Pelée is characterized by the competition between two major petrogenetic processes : Iractional crystallization and magma mixing. The important volcanic hazards associated with this volcano make the interest of the study: the existence of accurate datas about its geology and the chronology of its eruptions is favorable to a magmatologic study. The aim of this work, carried out within the framework of the PIRPSEV, is to determine the relative importance of the petrogenetic processes involved during the volnano history and then to conclude about the functioning of the underlying magma chambers. It is found upon the petrographical, mineralogical and geochemical characteristics of the ejecta of Mount Pelée. NOT CONTROLLED OCR
La magmatologie de la Montagne Pelée est caractérisée par la compétition entre deux processus pétrogénétiques : la cristallisation fractionnée et le mélange magmatique. L'intérêt de l'étude de cet édifice réside dans l'importance considérable des risques volcaniques qui lui sont associés; l'existence de données très précises sur sa géologie et sur la chronologie de ses éruptions offre un cadre favorable à une étude magmatologique. Le présent travail, réalisé dans le cadre du PIRPSEV, vise à déterminer, à partir de l'ensemble des caractéristiques pétrographiques, minéralogiques et géochimiques des matériaux volcaniques de la Montagne Pelée, l'importance relative des processus pétrogénétiques impliqués au cours de l'histoire de ce volcan, et d'en tirer des conclusions sur le fonctionnement des réservoirs magmatiques sous-jacents. OCR NON CONTRÔLE

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1986/these-3752.PDF
http://archimer.ifremer.fr/doc/00000/3752/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
OBJECTIVES: The aims of the study were to assess in patients with advanced HIV disease receiving antiretroviral therapy (ART) intensification with enfuvirtide (i) resistance at virological failure (VF), (ii) impact of baseline tropism on immunovirological response, and (iii) HIV-1 DNA tropism evolution during ART. METHODS: The ANRS 130 APOLLO randomized trial evaluated in naive patients the immunovirological impact of standard ART without (control arm) or with enfuvirtide. Tropism was determined on RNA and DNA by V3-loop sequencing interpreted using the Geno2Pheno algorithm. RESULTS: At baseline the median CD4 cell count was 30 cells/mm(3). Among the 170 patients assessable in this virological substudy, HIV-1 RNA tropism was as follows: 60% of viruses were R5 and 40% were R5X4/X4. HIV-1 DNA tropism was as follows: 54% were R5 and 46% were R5X4/X4. At week 24, 39% and 49% of patients experienced VF in the enfuvirtide and control arms, respectively. In the enfuvirtide arm, only resistance-associated mutations to enfuvirtide were detected. In the control arm, two patients displayed drug-resistant viruses at the time of VF. No impact of baseline tropism was observed on immunovirological response, regardless of the study arm. Among the 25 patients experiencing DNA tropism switch between baseline and week 24, 16 (64%) switched from R5 to R5X4/X4. These latter were mostly successfully suppressed patients receiving enfuvirtide and exhibiting poorer immunological response. CONCLUSIONS: Baseline RNA tropism had no impact on the immunovirological response. Drug resistance mutations were only detected for the fusion inhibitor. Finally, the mechanism of replenishment of the viral cellular reservoir with X4 viruses observed needs to be further analysed.
ISSN: 0305-7453

hal-00875130
https://hal.archives-ouvertes.fr/hal-00875130
DOI : 10.1093/jac/dks455
PUBMED : 23152480

Éditeur(s) : HAL CCSD
Résumé : International audience
Background: Comparative analysis, which aims at investigating ecological and evolutionary patterns among species, may help at targeting reservoirs of zoonotic diseases particularly in countries presenting high biodiversity. Here, we developed a simple method to target rodent reservoirs using published studies screening microparasite infections. Methods: We compiled surveys of microparasites investigated in rodents trapped in Thailand. The data comprise a total of 17,358 rodents from 18 species that have been investigated for a total of 10 microparasites (viruses, bacteria and protozoans). We used residual variation of microparasite richness controlled for both rodent sample size and pathogens' screening effort to identify major rodent reservoirs and potential risky habitats. Results: Microparasite species richness was positively related to rodent sample size and pathogens' screening effort. The investigation of the residual variations of microparasite species richness showed that several rodent species harboured more pathogens than expected by the regression model. Similarly, higher pathogen richness than expected was observed in rodents living in non-flooded lands, forests and paddy fields. Conclusion: Our results suggest to target some rodent species that are not commonly investigated for pathogen screening or surveillance such as R. andamanensis or B. savilei, and that non-flooded lands and forests should be more taken into caution, whereas much surveys focused on paddy rice fields and households.
Infection Ecology and Epidemiology

ird-00714369
http://hal.ird.fr/ird-00714369
http://hal.ird.fr/ird-00714369v2/document
DOI : 10.3402/iee.v2iO.18637
IRD : fdi:010055557

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During the early years of the Iceland Deep Drilling Project (IDDP), development of three distinctive technological and scientific approaches were formalised and then carried out until 2010 within a European funded project called HiTI (high temperature instruments for supercritical geothermal reservoir characterisation and exploitation). These approaches were: (1) development of several downhole instruments allowing them to function up to 300 ◦C and 400 ◦C, (2) identification of two new Na/Li cation ratio geothermometric relationships valid at very high temperature, (3) tracer testing with high temperature tolerant organic isomers and finally and (4) basalt rock deformation and petrophysical properties laboratory investigations at high temperature and pressure conditions.
ISSN: 0375-6505

hal-00921127
https://hal-brgm.archives-ouvertes.fr/hal-00921127
DOI : 10.1016/j.geothermics.2013.07.008

Résumé : En Guyane comme dans l'ensemble de la région amazonienne, le risque de maladie de Chagas pour l'homme a longtemps été sous estimé du fait de l'absence de vecteur domestique et de l'existence d'un réservoir animal exclusivement sauvage. Le travail présenté répond aux besoins de compléter et d'actualiser les connaissances épidémiologiques disponibles sur la maladie de Chagas dans ce département , en précisant les modalités de circulation de Trypanosoma cruzi et les facteurs impliqués dans le cycle à l'origine des cas humains. Les données cumilées entre 2001 et 2023 représentent 971 spécimens de triatomes. Nous avons choisi de différencier les triatomes provenant des zones non habitées (forêts primaire ou secondaire) de ceux provenant de zones habitées, collectées dans les maisons à la faveur d'intrusion. Une espère, Panstrongylus geniculatus, s'est distinguée par son abondance (61,1%) et son omniprésence dans les différents types de milieux explorés. Au total, neuf espèces ont été retrouvées. En zone non habitée, avec une prédominance de P. geniculatus, P. lignarius, Rhodnius pictipes et R. robustus. L'infection des triatomes par T. cruzi a été étudiée, avec une mise en évidence d'un taux d'infection plus élevé chez les triatomes collectés à l'intérieur des habitations (53.9%) que chez ceux provenant des zones non habitées (46%). L'étude sur les mammifères sauvages a montré des taux d'infection élevés pour T. cruzi chez deux espèces : didelphis marsupialis (62.5%) et Philander opossum (35%). Cette étude a été complétée par l'analyse de la variabilité génétique de T. cruzi identifié par des techniques de génotypage réalisées sur du matériel obtenu à partir de triatomes, de mammifères sauvages et domestiques et des hommes. En zone non habitée trois groupes, TcI, TcII-TcV-TcVI et TcIII-TcIV, ont été caractérisés, avec une prédominance de TcI. Parmi les acteurs du cycle parasite, les chiens et P. geniculatus hébergent le groupe TcIII-TcIV à la différence du genre Rhodnius et des marsupiaux qui hébergent le groupe TcI. Nos résultats ont permis d'émettre un certain nombre d'hypothèses sur la circulation des génotypes de T. cruzi en Guyane
In French Guiana, as in the whole of Amazon region, the risk of Chagas disease to humans has long been underestimated due to the presence of non-domiciled triatomines and wild animal reservoir. Overall, this thesis aims at reactualizing and improving epidemiological knowledge about Chagas disease in French Guiana, by specific modalities of circulation of Trypanosoma cruzi and the factorsinvolved in the transmission cycle of the origin of human cases. Accumulated data, between 2001 and 2013, represent 971 triatomine specimens collected. We chose to differentiate triatomine collected in uninhabited areas (primary or secondary forests) and those frominhabited areas, collected in homes by intrusion. One species, Panstrongylus geniculatus, was distinguished by its abundance (61.1%) and its presence in different types of habitats investigated. A total of nine species were found in uninhabited area, with the predominance of four species: P. geniculatus, P. lignarius, Rhodnius pictipes and Eratyrus mucronatus. In inhabited area, five species of triatomine were collected, with the predominance of P. geniculatus, R. pictipes and R. robustus. The triatomine infection rate with T. cruzi has been studied, with a highlighting of higher rate of infection in triatomine collected inside houses (53.9%) than those from uninhabited area (46%). The study on wild mammals showed high T. cruzi infection rates for two species: Didelphis marsupialis (62.5%) and Philander opossum (35%).This study was completed by the analysis of the genetic variability of T. cruzi identified by genotyping techniques performed on material obtained from triatomine, wild and domestic mammals and humans. In uninhabited area, three groups$ TcI, TcII-TcV-TcVI and TcIII-TcIV have been characterized, with a predominance of TcIII-TcIV group. In inhabited area, only two groups were characterized (TcI andTcIII-TcIV), with a predominance of TcI. Among the actor’s transmission cycle of parasite, dogs and P. geniculatus were characterized by TcIII-TcIV group. Contrary to Rhodnius genus and marsupials were characterized by the TcI group. Our results have allowed issuing a number of assumptions about the circulation of T. cruzi genotypes in French Guiana

http://www.theses.fr/2013AGUY0734/document

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Electrical resistivity soundings are used by geophysicists to determine the structure and composition of the Earth's crust and mantle and to explore natural resources (ore, oil, gas, water). Their interpretations in terms of composition and in-situ physical conditions depend mainly on laboratory measurements of electrical conductivity of rocks at simulated crustal conditions of temperature, pressure, saturation and pore pressures. These measurements present a numbers of limitations, in particular, in the case where conductive pore fluids are present, as in the case of deep reservoir conditions, where temperature exceeds 250 A degrees C. Here, we present a new cell capable of measuring electrical conductivity of large saturated samples at confining pressure up to 200 MPa, pore pressure up to 50 MPa, and temperature up to 500 A degrees C. The measurement cell has been developed in a commercial, internally heated, gas pressure apparatus (Paterson press). It is based on the concept of "guard ring" electrode, which is adapted to samples that are jacketed by a very conductive, metallic material. Numerical modeling of the current flow in the electrical cell allowed defining the optimal cell geometry. Calibration tests have been performed on Fontainebleau sandstones saturated with electrolytes of different conductivities, up to 350 A degrees C. The resulting electrical formation factor and temperature dependence of electrical conductivity are in very good agreement with previous studies. This new cell will improve the exploration and exploitation of deep fluid reservoirs, as in unconventional, high enthalpy geothermal fields. In particular, the investigations address possible effects of fluid-rock interactions on electrical resistivity of a reservoir host rock.
ISSN: 0169-3913

hal-00681997
https://hal.archives-ouvertes.fr/hal-00681997
DOI : 10.1007/s11242-011-9846-2

Éditeur(s) : HAL CCSD Elsevier
Résumé : High-precision Ni isotopic variations are reported for the metal phase of equilibrated and unequilibrated ordinary chondrites, carbonaceous chondrites, iron meteorites, mesosiderites, and pallasites. We also report new Zn and Cu isotopic data for some of these samples and combine them with literature Fe, Cu, and Zn isotope data to constrain the fractionation history of metals during nebular (vapor/solid) and planetary (metal/sulfide/silicate) phase changes. The observed variations of the Ni-62/Ni-58, Ni-61/Ni-58, and Ni-60/Ni-58 ratios vary linearly with mass difference and define isotope fractionation lines in common with terrestrial samples. This implies that Ni was derived from a single homogeneous reservoir. While no Ni-60 anomaly is detected within the analytical uncertainties, Ni isotopic fractionation up to 0.45 parts per thousand per mass-difference unit is observed. The isotope compositions of Ni and Zn in chondrites are positively correlated. We suggest that, in ordinary chondrites, exchange between solid phases, in particular metal and silicates, and vapor followed by mineral sorting during accretion are the main processes controlling these isotopic variations. The positive correlation between Ni and Zn isotope compositions contrasts with a negative correlation between Ni (and Zn) and Cu isotope compositions, which, when taken together, do not favor a simple kinetic interpretation. The observed transition element similarities between different groups of chondrites and iron meteorites are consistent with the genetic relationships inferred from oxygen isotopes (IIIA/pallasites and IVA/L chondrites). Copper is an exception, which we suggest may be related to separate processing of sulfides either in the vapor or during core formation. (C) 2007 Elsevier Ltd. All rights reserved.
ISSN: 0016-7037

hal-00408304
https://hal.archives-ouvertes.fr/hal-00408304
DOI : 10.1016/j.gca.2007.06.049

Éditeur(s) : HAL CCSD Elsevier
Résumé : A synthesis of backscatter imagery coupled with a large 3D seismic dataset in the Lower Congo Basin (LCB) reveals a patchy distribution of features interpreted to be associated with fluid seepage from 300 m to 2500 m water depth. With the exception of one region of anomalous backscatter positive-relief mounds, all inferred seep sites occur in negative-relief pockmarks. The extensive 3D seismic dataset in the LCB offers a unique opportunity to study the plumbing system that is feeding surface cold seep systems, and in general, to reconstruct the relationship between tectonics and fluid flow in continental margins. The fluid seeps in the LCB are associated with morphologically, stratigraphically or tectonically controlled focused fluid flow. The integration of the geophysical datasets, backscatter imagery coupled to 3D seismic, clearly indicates that fluid seeps are not randomly distributed, but their seabed organization reflects 1) the location of the underlying structure (reservoir or trap) where the fluids are coming from, 2) the geometry and morphology of the reservoir/trap, and 3) the discontinuities in the sedimentary column along which fluids have migrated. In the LCB seafloor pockmarks are always associated with underlying tectonic structures (fault zones, salt diapirs, polygonal faults) or buried sedimentary bodies (turbiditic channels, erosional surfaces), whereas they never occur above sub-horizontal parallel-stratified fine-grained sediments. Even if triggering processes can not be clearly defined here, we propose a model of seafloor fluid seep organization, which represents a new tool for identifying the geometry of flow pathways and the underlying buried bodies where the fluids are originating from. This qualitative 3D model provides insight into the geohydrologic processes of continental margins.
ISSN: 0025-3227

hal-00406640
https://hal.archives-ouvertes.fr/hal-00406640
DOI : 10.1016/j.margeo.2007.06.003

Éditeur(s) : Elsevier
Résumé : The distribution, partition and speciation of mercury (Hg) were studied along the redox gradient of an anthropogenically perturbed tropical estuary, the Sinnamary Estuary in French Guiana. This system is a partially mixed estuary characterized by an anoxic freshwater end-member, while the marine end member consists of the Amazon Plume. The set up of an artificial oxygenation system in the anoxic freshwater end-member generates sharp gradients of major chemical species (iron, sulfides, etc.) coupled with intense organic matter (OM) turnover. The coexistence of oxygenated waters and dissolved sulfides in an organic rich environment depicts the Upper Sinnamary Estuary (USE: part of Sinnamary Estuary under the tidal influence but upstream of the salt intrusion) as a potential site for Hg methylation. The concentrations of all mercurial species (HgT) in the unfiltered samples (HgTUNF), in the dissolved (HgTD) and particulate (HgTP) phases of the USE average 11 ± 3, 6 ± 2 and 5 ± 3 (i.e. 600 ± 200 pmol g-1) pmol L-1 respectively. Average concentrations of monomethylmercury (MMHg) in the unfiltered (MMHgUNF), dissolved (MMHgD) and particulate (MMHgP) phases were 3.7 ± 1.0, 2.0 ± 0.9 and 1.8 ± 1.2 (i.e. 220 ± 130 pmol g-1) pmol L-1 respectively. Water oxygenation and sulfides concentrations emerged to play a critical role in controlling MMHg levels. Additionally, iron cycling, acid-base mechanisms, and edoxdependent processes were involved in the MMHg partitioning between phases. Overall, the USE constitutes a biogeochemical reactor that gathers partitioning and methylation processes. Thepermanent MMHg inputs from the anoxic freshwater end-member combined with the intense endogenous Hg methylation ensures high MMHg levels in both dissolved and particulate phases. To illustrate, the USE exports 60 ± 20 % more MMHgUNF than it imports: 5.5 ± 0.7 vs. 3.5 ± 1.2 kg y-1.
Geochimica et Cosmochimica Acta (0016-7037) (Elsevier), 2008-07 , Vol. 72 , N. 22 , P. 5416-5430

Droits : 2008 Elsevier Ltd. All rights reserved
http://archimer.ifremer.fr/doc/2008/publication-4223.pdf
DOI:10.1016/j.gca.2008.08.021
http://archimer.ifremer.fr/doc/00000/4223/

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : National audience
The late Lower to Middle Permian Panjal Traps (NW Himalaya, India-Pakistan) represent the greatest magmatic province erupted on the northern Indian platform during the Neotethys opening. New geochemical and isotopic analyses were performed on basalts from the eastern borders of the traps (SE Zanskar-NW Spiti area) in order to characterize this volcanism, to discuss its compositional variations in comparison to Panjal counterparts and its relationships with the opening of Neotethys. Lavas show features of tholeiitic low-Ti (< 1.6%) continental flood basalts with LREE, Th enrichments and Nb-Ta negative anomalies. Trace element ratios combined with {varepsilon}Ndi values (–3.6 to +0.9) and high Pb isotopic ratios suggest that these tholeiitic basalts were derived from an OIB-like mantle contaminated at various degrees by a continental crust component. Previous geochemical features are broadly similar to those of the coeval Panjal volcanic sequences identified westwards (Ladakh, Kashmir and Pakistan). Present geochemical constraints obtained for the Panjal Traps basalts suggest they originated from rapid effusion of tholeiitic melts during opening of the Neotethys Ocean. Similar magmatism implying an OIB-type reservoir is contemporaneously recognized on and along the adjacent Arabian platform. Both Indian and Arabian Permian volcanics were emplaced during coeval syn-rift to post rift transition. These Lower to Middle Permian south Neotethyan continental flood magmatism are regarded as associated to a passive rifting. In this scheme, OIB-type isotopic signature would be related either to a melting episode of syn-rift up-welling mantle plumes or to a melting of a regional abnormally hot and enriched mantle.
EISSN: 1777-5817

insu-00338862
https://hal-insu.archives-ouvertes.fr/insu-00338862
DOI : 10.2113/gssgfbull.179.4.383