Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Paleostress orientations were calculated from fault populations at 24 sites along the SW-NE segment and five sites along the E-W. Yasin segment of the Karakoram-Kohistan Suture Zone in NW Pakistan They demonstrate the importance of combined thrusting and strike-slip faulting. However, several paleostress tensor directions are distinguished, a dominant NW-SE compression and a minor E-W compression are compatible with the recent evolution of this part of the Hindu Kush. From the lack of both systematic overprinting-relationships and spatial trend (the two tensors were obtained at different locations) we conclude that in each location any of these two shortening directions can dominate Heterogeneously distributed extension is found in some places and is likely due to local conditions These paleostress tensors substantiate a transpressional regime due to far-field Himalayan compression and document the long-term background of the seismogenic deformation in this region.
ISSN: 0743-9547

hal-00496459
https://hal.archives-ouvertes.fr/hal-00496459
DOI : 10.1016/j.jseaes.2010.01.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Located on the margin of the west Alboran basin, the Gibraltar Arc (Betic-Rif mountain belt) displays post-Pliocene vertical movements evidenced by uplifted marine sedimentary basins and marine terraces. Quantification of vertical movements is an important clue to understand the origin of present-day relief generation in the Betic-Rif mountain chain together with the causes of the Messinian Salinity Crisis. In this paper, we present the results of a pluridisciplinary study combining an analysis of low temperature thermochronology and Pliocene basins evolution to constrain the exhumation history and surface uplift of internals units of the Rif belt (Northern Morocco). The mean (U-Th)/He apatite ages obtained from 11 samples are comprised between 14.1 and 17.8 Ma and display a wide dispersion, which could be explained by a great variability of apatite chemistries in the analyzed samples. No correlations between altitude and age have been found along altitudinal profile suggesting a rapid exhumation during this period. Thermal modeling using our (U-Th)/He apatite ages and geochronological data previously obtained in the same area (40Ar/39Ar and K/Ar data on biotite, zircon and apatite fission track) allow us to propose a cooling history. The rocks suffered a rapid cooling at 60-100 °C/Ma between 22.5 and 19 Ma, then cooled to temperatures around 40 °C between 19 and 18 Ma. They were re-heated at around 110 °C between 18 and 15 Ma then rapidly cooled and exhumed to reach the surface temperature at around 13 Ma. The re-heating could be related to a renewal in thrusting and burying of the inner zones. Between 15 and 13 Ma the cooling resumed at a rate of 50 °C/Ma indicating an exhumation rate of 0.8 mm/y considering an average 40 °C/km geothermal gradient. This exhumation may be linked to the extension in the Alboran Sea. Otherwise biostratigraphic and sedimentological analysis of Pliocene basins of the internal Rif provided informations on the more recent events and vertical movements. Pliocene deposits of the Rifian coast represent the passive infilling of palaeo-rias between 5.33 and 3.8 Ma. The whole coastal area was uplifted at slow average rates (0.01-0.03 mm/y) in relation with a northeastward tilting of 0.2-0.3° since the Lower-Pliocene. A late Pliocene to present extensional tectonics associated to uplift has been identified all along the coastal ranges of the Internal Zone of the Rif chain. This extension was coeval with the major late Pliocene to Pleistocene extensional episode of the Alboran Sea and appears to be still active nowadays. No significant late Messinian uplift was evidenced, thus calling into question the geodynamic models relating the closure of the marine gateways and the MSC to slab roll back.
ISSN: 0264-3707

hal-01053531
https://hal.archives-ouvertes.fr/hal-01053531
DOI : 10.1016/j.jog.2014.01.006

Éditeur(s) : HAL CCSD
Résumé : Guadeloupe Island (West French Indies) is one of the twenty islands that compose the Lesser Antilles Arc, which results from the subduction of the Atlantic Ocean plate beneath the Caribbean one. The island lies in a complex volcano-tectonic system and the need to understand its geological context has led to numerous on- and offshore geophysical investigations. This work presents the compilation and processing of available, on-land, airborne and marine, gravity and magnetic data acquired during the last 40 years on Guadeloupe Islands and at the scale of the Lesser Antilles Arc. The overall dataset provides new Bouguer and reduced to the pole magnetic anomaly maps at the highest achievable resolution. Regionally, the main central negative gravity trend of the arc allows defining two subsident areas. The first one is parallel to the arc direction (~N160°E) to the north, whereas the second unexpected southern one is oriented parallel to oceanic ridges (N130°E). Along the Outer Arc, the long wavelength positive anomaly is interpreted, at least along the Karukera Spur, as an up-rise of the volcanic basement in agreement with the seismic studies. To the NE of Guadeloupe, the detailed analysis of the geophysical anomalies outlines a series of structural discontinuities consistent with the main bathymetric morphologies, and in continuity of the main fault systems already reported in this area. Based on geophysical evidences, this large scale deformation and faulting of the Outer Arc presumably primarily affects the Atlantic subducting plate and secondarily deforms the upper Caribbean plate and the accretion prism. At the scale of Guadeloupe Island, joined gravity and magnetic modeling has been initiated based on existing interpretation of old seismic refraction profiles, with a general structure in three main layers. According to our geophysical anomalies, additional local structures are also modeled in agreement with geological observations: i) the gravity and magnetic signals confirm an up-rise of the volcanic basement below the limestone platforms outcropping on Grande-Terre Island ; ii) the ancient volcanic complexes of Basse-Terre Island are modeled with high density and reverse magnetized formations; iii) the recent volcanic centre is associated with formations consistent with the low measured density and the underlying hydrothermal system. The EW models coherently image a NNW-SSE depression structure in half-graben beneath Basse-Terre Island, its western scarp following the arc direction in agreement with bathymetric and seismic studies to the north of the island. The so-defined depressed area, and particularly its opening in half-graben toward the SW, is interpreted as the present-day front of deformation of the upper plate associated with the recent volcanic activity on and around Guadeloupe. Based on this regional deformation model, perspectives are given for further integrated investigation of key targets to address the internal structure and evolution of the Lesser Antilles Arc and Guadeloupe volcanic system.
Colloque 2012 du Comité National Français de Géodésie et Géophysique (CNFGG)
Clermont-Ferrand, France

hal-00742653
https://hal-brgm.archives-ouvertes.fr/hal-00742653
https://hal-brgm.archives-ouvertes.fr/hal-00742653/document
https://hal-brgm.archives-ouvertes.fr/hal-00742653/file/CNFGG_Caraibes.pdf

Éditeur(s) : HAL CCSD
Résumé : Le projet METYSS (Messinian Event in the Tyrrhenian from Seismic Study) concerne le bassin tyrrhénien occidental le long de la côte est-sarde et s'intègre dans le cadre d'une étude comparative des marqueurs sismiques de la Crise de Salinité Messinienne (CSM) à l'échelle du bassin méditerranéen. La mer tyrrhénienne est un bassin arrière-arc néogène lié à la subduction calabraise. Le rifting débute sur la marge est-sarde au cours du Tortonien et du Messinien, impliquant au moins localement une contemporanéité des dépôts de la CSM avec les processus de rifting qui segmente la marge en plusieurs sous-bassins. Cette région est donc particulièrement adaptée à la caractérisation et à l'organisation des dépôts messiniens en contexte de tectonique active. L'identification des marqueurs de la CSM et la détermination de leurs caractéristiques spatio-temporelles (faciès, géométrie, distribution et relations) ont été effectuées à partir de l'interprétation de 1200 km de profils sismiques multitraces HR acquis en 2009 lors de la campagne METYSS-1 sur le N/O "Téthys II". L'un des premiers résultats est que l'on retrouve dans cette zone les marqueurs caractéristiques de la CSM, comparables à ceux déjà observés dans le bassin méditerranéen occidental : surfaces d'érosion (MES, TES, BES) et unités messiniennes typiques (UU: Upper Unit; MU: Mobile Unit). La réalisation des cartes de répartition de ces unités sismiques permet d'en déterminer la variabilité spatiale, et notamment d'affiner celle de la couche de sel (MU), par rapport aux données pré-existantes. Ainsi, le long de la partie haute de la marge est-sarde, la rareté de l'unité MU et la présence des UU semblent indiquer que cette zone se situait à une profondeur intermédiaire pendant la crise. Inversement, plus profondément dans le bassin, l'épaisseur importante de la couche de sel sous les UU, témoigne d'une profondeur déjà conséquente de cette zone durant la CSM. On remarque également que dans le secteur nord de la zone d'étude, la répartition de MU est contrainte par les blocs basculés, le sel étant confiné dans les sous-bassins qui segmentent la marge. Dans le secteur sud, la répartition de la couche de sel est plus homogène dans le bassin profond, et est déformée par une tectonique salifère active. A terme, nous souhaitons utiliser les marqueurs de la CSM pour reconstituer les paléo-connexions et paléo-profondeurs des différents bassins de la zone, mais également comprendre les interactions entre tectonique crustale, tectonique salifère, et sédimentation. L'objectif est aussi de restituer l'évolution tectono-sédimentaire de la marge est-sarde depuis 6Ma.
13ème Congrès Français de Sédimentologie
Dijon, France

hal-00657315
https://hal-brgm.archives-ouvertes.fr/hal-00657315

Éditeur(s) : HAL CCSD
Résumé : International audience
We present an overview of the Mid-Cretaceous hyper-extended rift systemexposed in the northern part of the Pyrenean mountain range. Itsinversion during the Pyrenean orogeny allows for precious observationsof the deep-seated processes occurring at the foot of distal margins.Some peculiar aspects characterizing the pre-Alpine hyper-extended domainare examined throughout the 400 km long suture that is fossilizedin the North Pyrenean Zone (NPZ). The high temperature/low pressure(HT/LP) thermal imprint of the extensional event is studied thanksto a dataset of more than hundred peak temperature measurementsby Raman spectroscopy of the carbonaceous material (RSCM). Thepre- and syn-rift metasediments are characterized by an intense, synmetamorphicductile deformation. Focusing on several key-localitiesof the NPZ, we examine the emplacement conditions of the peridotitesin response to this extreme crustal thinning. Geological evidencessuch as the occurrence of peridotite bodies directly underlying metamorphicpre-rift sediments indicate an early attenuation of the rifted continentalcrust. Moreover, syn-rift, Albian-Cenomanian flysch sequenceswere deposited synchronously with the syn-metamorphic ductile deformationof the pre-rift sequences. All along the Internal MetamorphicZone (IMZ), the base of the flysch deposits also recorded the HT tectonicevent. Such a synchronicity between geological events, which aregenerally separated in time, is not common in mountain belts. We examinehow tectonics, metamorphism and sedimentation may be activein a single basin during extension. We propose an original mechanismfor the evolution of the basins involving continuous basal extraction ofthe pre-rift metamorphic sediments. This early HT deformation eventrelates to the « phase anté-Cénomanienne » described by Pyrenean geologistssince 1930.
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080795
https://hal-insu.archives-ouvertes.fr/insu-01080795

Éditeur(s) : HAL CCSD
Résumé : International audience
The Achmmach tin mineralization (NE of theMoroccan Central Massif) is associated with tourmaline-richalteration halos, veins, and faults hosted in sandstones andmetapelites of the Upper Visean-Namurian. These depositsare reported to be late Hercynian in age and related to theemplacement of late-orogenic granite not outcropping in thestudied area. Structural and paragenetic studies of theAchmmach tin deposit were conducted in order to establisha general model of the mineralization. From field constraints,the late Hercynian phase is marked by a transition fromtranspression to extension with deformation conditions evolvingfrom ductile to brittle environments. The transpression(horizontal shortening direction roughly trending E-W) is coevalwith the emplacement of the first tourmaline halos alongseveral conjugated trends (N070, N020, and N120).Thereafter, a tourmaline-rich breccia formed in response tothe fracturing of early tourmaline-altered rocks.Subsequently, during the extensional phase, these structureswere reactivated as normal faults and breccias, allowing theformation of the main tin mineralization (cassiterite) associatedwith a wide variety of sulfides (arsenopyrite, chalcopyrite,sphalerite, galena, pyrrhotite, bismuthinite, pyrite, and stannite). This evolution ends with fluorite and carbonate deposition.The hydrothermal fluid flow velocity, calculated byapplying statistical measures on the tourmaline growth bands,varies with the lithology. Values are lower in metapelites andhigher in breccia. In the general evolution model proposedhere, tourmaline alteration makes the rock more competent,allowing for brittle fracturing and generation of open spacewhere the main Sn mineralization was precipitated.
Mineralium Deposita

insu-01240481
https://hal-insu.archives-ouvertes.fr/insu-01240481
DOI : 10.1007/s00126-015-0613-0

Éditeur(s) : HAL CCSD Geological Society
Résumé : Extensional basins often evolve both with the generation of normal faults at all scales, and with tilting in the hanging walls and footwalls of major structures. This paper examines the effect of regional tilting on the development of normal fault arrays in an anisotropic sequence, using the asymmetric Lodève Basin, France, as a case study. The orientation range of normal faults is found not to match that expected by continued symmetric generation of conjugate normal faults during tilting. Instead, continued generation of new faults preferentially occurred for faults dipping opposite to the direction of tilt, with propagation perpendicular to bedding. The presence of early bedding-perpendicular joints in the competent sandstone units aided propagation of these faults during tilting and this preferential asymmetric development. Bedding-parallel slip surfaces were activated as normal faults during the later stages of bedding tilting, showing complex interaction patterns with later faults downthrowing in the direction opposite to bedding tilting. Hence knowledge of the timing between tilting of the strata and deformation helps in evaluating the likely complexity of fault arrays at subseismic scales in extensional basins, and may also help in understanding the evolution of fault systems in tilted normal fault blocks at the reservoir scale.
ISSN: 0016-7649

hal-00404753
https://hal.archives-ouvertes.fr/hal-00404753
DOI : 10.1144/0016-76492006-047

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Coupling between erosion and tectonics is thought to play a determinant role in orogenic evolution. Here, we investigate the interplay in this coupling between the assumed erosion law and the crustal rheology at the margin of a collisional plateau, like the Himalaya of Central Nepal. Lithospheric deformation is calculated over a time scale of 100 kyr by a 2D finite element model that incorporates the rheological layering of the crust and the main features of the convergence across the range. For the upper boundary condition, two surface processes were tested: a linear diffusion model and a 1D1/2 integrative model including fluvial incision along the fluvial network and hillslope erosion by landsliding. Model results and their sensitivity to the chosen combinations of erosion law and crustal properties are discussed in light of the constraining geologic and geomorphologic observations. In contrast with the conclusions of Cattin and Avouac [2000] , where a compliant quartz-rich crustal rheology and diffusion law were required, we combine a composite quartz-diabase rheology for the crust with fluvial incision erosion law to account for erosion and elevation profiles across the Himalaya of Central Nepal. More generally, it is proposed that, because of the interplay between the dominant denudation conditions and the rheology of the crust, both well documented erosion rates and processes can provide significant constraints on crustal properties within an active orogen.
ISSN: 0094-8276

hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697/document
https://hal.archives-ouvertes.fr/hal-00788697/file/godard_et_al.pdf
DOI : 10.1029/2004GL021006

Éditeur(s) : HAL CCSD Wiley
Résumé : Clay shale landscapes are sensitive to landslide, erosion, and re-sedimentation processes. In this context, tectonized clay shales have peculiar hydrological and mechanical behaviours. In order to improve our understanding of the processes involved in such systems, an experimental site has been settled in the Draix Observatory (ORE DRAIX) on a black marl hill slope of the Southern Alps (France) in the framework of the ECOU-PREF project. The site is a natural laboratory to study the evolution of clay shale landscapes at several scales (regional to µm). In this study, we aim to characterize the internal structure and fissure patterns of a stable interfluve, in order to locate preferential water flows within the system, and anticipate its evolution. This work is based on a series of mutli-disciplinary approaches including petrophysical analyses, well pulse injection tests and downhole geophysical measurements. Borehole geophysical results were combined with laboratory measurements on core plugs (permeability, density, porosity, and acoustic velocity). Optical and acoustical images have been used as an original tool for internal discontinuities characterisation and potential active flow path detection. They allowed the identification of three main lithological units interpreted as several stages of shale alteration. In addition, several main structural plane discontinuities (open fractures, schistosity planes, and fractures infilled with calcite or clays) were identified from the images and their potential transmissivity discussed with regard to piezometric and tracer measurements. In all, the integration of measurements leads to propose a simple scenario of fluid circulation and chemical alteration of the interfluve.
ISSN: 0885-6087

hal-00757581
https://hal.archives-ouvertes.fr/hal-00757581
DOI : 10.1002/hyp.7997

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present field data from segmented normal faults having particular displacement and overlapping geometries that may be related to down-dip branching of the fault segments. Based on a 3-D numerical modeling study of computed displacement and stress fields around different geometries of down-dip branched normal fault segments, we show that the bends of fault surfaces that coalesce at depth exert a significant influence on (I) the displacement distribution on the fault segment branches and (2) the quasi-static stress fields around the relay zones. The asymmetry in the displacement profiles and low fault interaction at relay zones modeled are consistent with the fault segment geometries observed in field data. As an application, we model the geometry and interaction of the Vallo di Diano normal fault which is segmented at the Earth's surface and which produced an earthquake of magnitude 6.4 along a single fault surface at depth. Numerical modeling of the segmented fault produces an asymmetric displacement profile and low shear stress at the relay zone consistent with the profile and fault interaction inferred from the held. We conclude that asymmetry of the displacement profile and large overlap/separation ratio of the unlinked relay zone can be indicators of the presence of a continuous fault surface underneath. These geometrical attributes are therefore important to consider in the probabilistic analysis of seismic hazard along segmented normal faults.
ISSN: 0191-8141

hal-00411161
https://hal.archives-ouvertes.fr/hal-00411161
DOI : 10.1016/j.jsg.2008.07.005

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
his study describes the structural setting, petrogenesis, and geochronology of a suite of acidic magmatic rocks that are intruded in the metamorphic core of the Tertiary ophiolitic suture zone of the Sabzevar Range, NE central Iran. These intrusive bodies show tabular geometries with solid-state fabrics documenting syntectonic emplacement during crustal shortening. In the total alkalis-silica (TAS) diagram, their compositions define a medium-K calc-alkaline suite, spanning from basaltic andesite to the dacite and rhyolite fields. They show characteristic low MgO (0.15–0.60 wt%) and Ni (<20 ppm), high Sr contents, a negligible Eu anomaly, and extremely fractionated rare earth element (REEs), with high La/Yb and Sr/Y (up to 900) ratios, but very low Yb and Y contents. They also show zircon Hf isotope compositions compatible with a mid-ocean-ridge basalt (MORB)–type oceanic crust. Inverse and forward thermobarometry constrains conditions of magma crystallization in the upper-pressure field of the amphibolite facies (ca. 1.2–1.5 GPa and 750 °C). Integrated U-Pb zircon and 40Ar/39Ar white mica and amphibole geochronology constrains the Sabzevar magmatism to the late Paleocene (at ca. 58 Ma). Genesis of the Sabzevar magmatic suite is interpreted in terms of prograde, wet amphibolite melting during oceanic subduction, within a pressure-temperature range between a plagioclase-out and a hornblende-out boundary. Magma differentiation and high-pressure amphibole fractionation of pristine slab melts are proposed as the dominant factors that imparted the adakite signature in the Sabzevar structural zone. Implications in terms of the regional tectonic scenario are discussed and framed within the advancing and retreating evolution of the Neotethyan subduction during the Mesozoic–Tertiary time span.
ISSN: 0016-7606

hal-01122824
https://hal.archives-ouvertes.fr/hal-01122824
DOI : 10.1130/B30913.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The subcontinental lithospheric mantle evolves through time due to tectonic events and processes as static recrystallization and melt percolation. To constrain the extent of these processes in the South Patagonian subcontinental mantle lithosphere we performed a microstructural and Electron Backscattered Diffraction (EBSD) study of a suite of 35 peridotite xenoliths brought to the surface by Plio-Pleistocene alkaline volcanic rocks from Gobernador Gregores and Pali Aike. All samples show a well-developed olivine and pyroxene crystallographic preferred orientation (CPO), consistent with deformation by dislocation creep with dominant activation of [100]{0kl} in olivine. The coarse granular or tabular textures and the low density of intracrystalline deformation features indicate that deformation was followed by annealing under static conditions. The xenoliths also show microstructural evidence of multiple episodes of reactive melt percolation. Neither annealing nor melt percolation erased the olivine CPO, which has [010]-fiber, [100]-fiber and orthorhombic patterns in Pali Aike xenoliths and essentially [010]-fiber and orthorhombic patterns in Gobernador Gregores xenoliths. Seismic properties calculated based on the CPO and modal compositions are, however, rather homogeneous, with fast S-wave polarization and P-wave propagation parallel to the [100] olivine axis. The variation in the olivine CPO solely changes the minimum S-wave birefringence direction, which is normal to the foliation for axial-[010] olivine CPO. Average samples for the two localities, obtained by adding up the individual samples CPO data in a common reference frame, show, however, a 'normal' upper mantle anisotropy with a maximum S-wave birrenfringence of ca. 5% at high angle to the both the maximum [010] and [100] axes concentrations, that is in the foliation, but normal to the lineation, and a minimum birefringence at low angle to the [100] maximum, that is parallel to the lineation.
ISSN: 0040-1951

hal-01053500
https://hal.archives-ouvertes.fr/hal-01053500
DOI : 10.1016/j.tecto.2014.02.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The basement of central Madagascar displays two contrasted structural patterns. The first one (D1) is characterized by north-striking foliations that are gently dipping to the west and carry W- to WSW-plunging lineations, whereas the second one (D2) is characterized by steeper foliations that are striking to the NNE and lineations that are either subhorizontal or gently plunging to the SSW. The younger pattern is related to late-Panafrican tectonics along the major Angavo shear zone that is about 1000 km in length and 40 km in width with apparently little offset. Deformation in the Angavo zone induced interference folding on both sides. The D2 event is characterized by low pressures (ca 400 MPa) and high temperatures (up to 790 degrees C) responsible for prograde granulite facies conditions, that resulted from heat transfer due to magma and fluid advection in the Angavo shear zone. The D2 event is pinned at 550 +/- 11 Ma by a new monazite age from a reoriented Andringitrean granite near Ankaramena. A new suite of amphibole and biotite Ar-Ar geochronological data enables to retrace the thermochronogical evolution inside and outside the Angavo shear zone. Combined with new structural results from the western interference zone. these ages yield a better understanding of the late-Panafrican history of central Madagascar. No diachronism is observed along the strike of the Angavo shear zone. Conversely, amphibole and especially biotite ages decrease from West to East, i.e. towards the shear zone. These new ages range from 511 to 469 Ma. A 1-D conductive model constrains the thermal effect in relation with the Angavo shear zone to be restricted to a lateral distance of ca 60 km (in map view) for a maximum heating duration of 20 Myr. This is in agreement with the Ar-Ar data and with the width of the observed interference zone. Following this episode of deformation and heat transfer, the estimated cooling rates of the Angavo shear zone range from to 15 to 6 degrees C/Myr, respectively before and after 515 Ma. A post-collision intracontinental setting is suggested for the Angavo shear zone, which is regarded as a remote effect of the Kuunga Orogeny between India and Antarctica.
ISSN: 0040-1951

hal-00463507
https://hal.archives-ouvertes.fr/hal-00463507
DOI : 10.1016/j.tecto.2009.03.009

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We analyze the kinematics of fault tip folding at the front of a fold-and-thrust wedge using a sandbox experiment. The analog model consists of sand layers intercalated with low-friction glass bead layers, deposited in a glass-sided experimental device and with a total thickness h = 4.8 cm. A computerized mobile backstop induces progressive horizontal shortening of the sand layers and therefore thrust fault propagation. Active deformation at the tip of the forward propagating basal décollement is monitored along the cross section with a high-resolution CCD camera, and the displacement field between pairs of images is measured from the optical flow technique. In the early stage, when cumulative shortening is less than about h/10, slip along the décollement tapers gradually to zero and the displacement gradient is absorbed by distributed deformation of the overlying medium. In this stage of detachment tip folding, horizontal displacements decrease linearly with distance toward the foreland. Vertical displacements reflect a nearly symmetrical mode of folding, with displacements varying linearly between relatively well defined axial surfaces. When the cumulative slip on the décollement exceeds about h/10, deformation tends to localize on a few discrete shear bands at the front of the system, until shortening exceeds h/8 and deformation gets fully localized on a single emergent frontal ramp. The fault geometry subsequently evolves to a sigmoid shape and the hanging wall deforms by simple shear as it overthrusts the flat ramp system. As long as strain localization is not fully established, the sand layers experience a combination of thickening and horizontal shortening, which induces gradual limb rotation. The observed kinematics can be reduced to simple analytical expressions that can be used to restore fault tip folds, relate finite deformation to incremental folding, and derive shortening rates from deformed geomorphic markers or growth strata.
ISSN: 2169-9313

hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061/document
https://hal.archives-ouvertes.fr/hal-00138061/file/Bernard_et_al-2007-Journalsur Geophysical_Research__Solid_Earth_%281978-2012%29.pdf
DOI : 10.1029/2005JB004149

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Gulf of Cadiz key segment of the Africa-Iberia plate boundary (North-East Atlantic ocean), three main different modes of tectonic interference between a recently identified wrench system (SWIM) and the Gulf of Cadiz Accretionary Wedge (GCAW) were tested through analog sand-box modeling: a) An active accretionary wedge on top of a pre-existent inactive basement fault; b) An active strike-slip fault cutting a previously formed, inactive, accretionary wedge; and c) Simultaneous activity of both the accretionary wedge and the strike-slip fault. The results we obtained and the comparison with the natural deformation pattern favor a tectonic evolution comprising two main steps: i) the formation of the Gulf of Cadiz Accretionary Wedge on top of inactive, Tethyan-related, basement faults (Middle Miocene to ~ 1.8 Ma); ii) subsequent reactivation of these basement faults with dextral strike-slip motion (~ 1.8 Ma to present) simultaneously with continued tectonic accretion in the GCAW. These results exclude the possibility of ongoing active SWIM wrench system cross-cutting an inactive GCAW structure. Our results also support a new interpretation of the SWIM wrench system as fundamentally resulting from strike-slip reactivation of an old (Tethyan-related) plate boundary.
ISSN: 0025-3227

insu-00643630
https://hal-insu.archives-ouvertes.fr/insu-00643630
https://hal-insu.archives-ouvertes.fr/insu-00643630/document
https://hal-insu.archives-ouvertes.fr/insu-00643630/file/Duarte_etal_2011_MS-1.pdf
DOI : 10.1016/j.margeo.2011.09.014

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
Guadeloupe island (West French Indies) is one of the twenty islands that compose the Lesser Antilles arc, which results from the subduction of the Atlantic ocean plate beneath the Caribbean one. The island lies in a complex volcano-tectonic system and the need to understand its geological context has led to numerous on- and offshore geophysical investigations. This work presents a compilation and the processing of available, on-land, airborne and marine, gravity and magnetic data acquired during the last 40 years on Guadeloupe islands and at the scale of the Lesser Antilles arc. The overall dataset provides new Bouguer and reduced to the pole magnetic anomaly maps at the highest achievable resolution. Regionally, the main central negative gravity trend of the arc allows defining two subsident areas. The first one is parallel to the arc direction (~N160°E) to the north, whereas the second unexpected southern one is oriented parallel to oceanic ridges (N130°E). Along the Outer arc, the long wavelength positive anomaly is interpreted, at least along the Karukera spur, as an up-rise of the volcanic basement in agreement with the seismic studies. To the NE of Guadeloupe, the detailed analysis of the geophysical anomalies outlines a series of structural discontinuities consistent with the main bathymetric morphologies, and in continuity of the main fault systems already reported in this area. Based on geophysical evidences, this large scale deformation and faulting of the Outer arc presumably primarily affects the Atlantic subducting plate and secondarily deforms the upper Caribbean plate and the accretion prism, as evidenced in bathymetry as well as on the islands. At the scale of Guadeloupe island, combined gravity and magnetic modeling has been initiated based on existing interpretation of old seismic refraction profiles, with a general structure in three main layers. According to our geophysical anomalies, additional local structures are also modeled in agreement with geological observations: i) the gravity and magnetic signals confirm an up-rise of the volcanic basement below the limestone platforms outcropping on Grande-Terre island ; ii) the ancient volcanic complexes of Basse-Terre island are modeled with high density and reverse magnetized formations; iii) the recent volcanic centre is associated with formations consistent with the low measured density and the underlying hydrothermal system. The E-W models coherently image a NNW-SSE depression structure in half-graben beneath Basse-Terre island, its western scarp following the arc direction in agreement with bathymetric and seismic studies to the north of the island. The so-defined depressed area, and particularly its opening in half-graben toward the SW, is interpreted as the present-day front of deformation of the upper plate, associated with the recent volcanic activity on and around Guadeloupe. Based on this regional deformation model, perspectives are given for further integrated investigation of key targets to address the internal structure and evolution of the Lesser Antilles arc and Guadeloupe volcanic system.
EISSN: 1777-5817

hal-00853352
https://hal.archives-ouvertes.fr/hal-00853352
DOI : 10.2113/gssgfbull.184.1-2.77

Éditeur(s) : HAL CCSD
Résumé : International audience
Tin mineralization in Achmmach deposit (NE of Moroccan Central Massif) is associated with tourmaline-rich alteration halos and faults, within N70 shear zones, hosted in sandstones and metapelites of the Upper Visean-Namurian. Such deposits were reported as late-Variscan in age and related to the emplacement of late orogenic granite not outcropping in the studied area.From field constraints, it appears that the late Variscan phase is marked by a transition from transpression to extension with conditions of deformation evolving from ductile to brittle environments. During the transpressive phase (horizontal shortening direction roughly trending E-W), pervasive tourmaline is deposited under the form of metasomatic halos around fractures in the upper levels relative to the deep batholith. This hydrothermal activity is coeval with ductile shear zones within a large corridors trending N70. Tourmaline-rich alteration appears as a hardening stage contributing to the modification of the tectonic style of rocks. Thereafter, a strong brecciation occurs in response of re-using and re-opening of the strike-slip structure. The result is (1) the formation of dextral (N070, N020) and sinistral (N120) shears, and (2) the circulation of fluids within early tourmalinites and formation of tourmaline-rich breccia. Subsequently, during the late orogenic extensional phase, tourmalinite breccias reopened as normal faults acting as overpressure fluid pathways for developing other breccias and veins. Such event is marked by deposition of tin mineralization i.e., cassiterite followed by sulphides, and then fluorite and carbonates at the end.From analysis of the shear-zone structure and superimposition of tourmalines and tin mineralization in the same structures, it is possible to suggest a structural control continuum. Such control is well expressed during metasomatism and deposition of hydrothermal tourmaline under the transpressive phase. Thereafter, under the extensive phase allowing open-space, tin-mineralization were trapped.This study has been supported by AI MA/09/210
24ème RST
Pau, France

insu-01546927
https://hal-insu.archives-ouvertes.fr/insu-01546927

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
U-Pb zircon and Ar-Ar amphibole and biotite ages from rocks of the West Congo Belt of Angola indicate that this area underwent two main deformation events of amphibolite facies grade at c. 540 and 490 Ma, which were followed by tectonically assisted exhumation during eastward thrusting of the hinterland domain onto the foreland domain. High-grade conditions in the West Congo Belt are 20-40 Ma younger than in the Ribeira-Araçuai Belt of Brazil, its South American counterpart, or than in the westernmost Kaoko Belt of Namibia, its African correlative. In the present state of knowledge, a more appropriate counterpart to the southern part of the West Congo Belt may be restricted to the Cabo Frio Terrane in the eastern Ribeira Belt, which yields a broadly similar evolution.
ISSN: 0954-4879

hal-00716463
https://hal.archives-ouvertes.fr/hal-00716463
DOI : 10.1111/j.1365-3121.2012.01060.x

Éditeur(s) : HAL CCSD
Résumé : Corsica is located in the Mediterranean sea, about 90 km from the Italian coast of Tuscany and 175 km from the French Riviera. This relatively large island stretches for 180 km in the north-south direction and 85 Km east-west. The rugged landscape, with a mean elevation of ca. 500 m and the highest point at 2710 m (Monte Cinto) is interrupted only by a major plain along the east coast. CorseAlp 2011 was held in April 2011. A link to the website is here: CorseAlp 2011. The CorseAlp field trips were designed to introduce the participants to the general features of the geology of Alpine Corsica and to recent specific discoveries. Field trip 1 focused on the geology of the Ocean-Continent Transition preserved in the Monte San Petrone, in Central Corsica, which was subducted to eclogite facies conditions during the Alpine orogeny. The three days post-workshop field trip (Field trip 2) focused on the general architecture of Alpine Corsica in an EW transect between the Balagne region and Bastia. The main topics of Field trip 1 and 2 allow discussion about the overall evolution of Alpine Corsica in the framework of Mediterranean geodynamics, with a focus on the most controversial aspects.
Journal of the Virtual Explorer

hal-00688965
https://hal.archives-ouvertes.fr/hal-00688965

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Ronda peridotite supplies one of the best objects to document subcontinental mantle deformation, but its internal deformation and exhumation mechanisms remain controversial. Here we provide new structural data and numerical results that constrain the Oligocene-Miocene deformation history of the Ronda massif. We first describe a mantle shear zone in the northern massif that developed subcrustal strain localization during decompression and related partial melting. The deformation regime of this mantle shear zone evolved from penetrative NE-SW stretching to sinistral shear highlighted by discrete shear bands. We then show structural observations that document a viscous deformation in the southern massif occurring prior to the thrust-assisted emplacement of the peridotite during large decompression. Finally, we performed numerical investigations that quantify a high temperature of 980°C for the basal peridotite lens at the time of its crustal emplacement. Our numerical results constrain the timing of ductile deformation of the peridotite just before 22 Ma, probably between 30 and 22 Ma. Altogether, these features led us to conclude that the deformation and exhumation of the Ronda peridotite results from lithosphere thinning subsequently inverted in the course of the Oligocene-Miocene. Among available models, our findings support the hypothesis of peridotite exhumation by the inversion of a thinned back-arc continental lithosphere during westward slab rollback through the Alboran region.
ISSN: 0278-7407

insu-00924180
https://hal-insu.archives-ouvertes.fr/insu-00924180
https://hal-insu.archives-ouvertes.fr/insu-00924180/document
https://hal-insu.archives-ouvertes.fr/insu-00924180/file/tect20062.pdf
DOI : 10.1002/tect.20062