Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : The Fars arc accommodates the oblique convergence between the Arabic plate and the Iran block. Many geological observations suggest block rotations from regional to local scales. We present palaeomagnetic investigations in the Fars arc and its eastern termination, the Zagros-Makran syntaxis. Sixty-four sites have been sampled covering the Palaeocene Pabdeh Fm. to Mio-Pliocene Agha-Jhari Fm., the latest being the most sampled formation. We document pre-tilting components in all formations. However, coarse fractions of Agha-Jhari clastics formation retain a post-tilting remagnetization. As a whole, block rotations rarely exceed 20 degrees. In the western Fars arc, clockwise and counter-clockwise rotations of small amplitudes are consistent with the torsions observed near the strike slip Kazerun and Mangarak faults. In the Zagros Makran syntaxis, counter-clockwise and clockwise rotations are observed, respectively, in the western and eastern part. This pattern is consistent with an amplification of the shape of the syntaxis. Between Zagros and Makran, palaeomagnetic data support that the present-day arcuate shape of the arc is secondary. We assume that most of the block rotations took place during the Plio-Pleistocene, during a blocking stage of the Zagros-Makran syntaxis. We emphasize the role of Oman Peninsula which plays as an indenter for the propagation of the Fars thrust belt.
ISSN: 0956-540X

hal-00411142
https://hal.archives-ouvertes.fr/hal-00411142
DOI : 10.1111/j.1365-246X.2008.03732.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : Hot collisional orogens are characterized by abundant syn-kinematic granitic magmatism that profoundly affects their tectono-thermal evolutions. Voluminous granitic magmas, emplaced between 360 and 270 Ma, played a visibly important role in the evolution of the Variscan Orogen. In the Limousin region (western Massif Central, France), syntectonic granite plutons are spatially associated with major strike-slip shear zones that merge to the northwest with the South Armorican Shear Zone. This region allowed us to assess the role of magmatism in a hot transpressional orogen. Microstructural data and U/Pb zircon and monazite ages from a mylonitic leucogranite indicate synkinematic emplacement in a dextral transpressional shear zone at 313 +/- 4 Ma. Leucogranites are coeval with cordierite-bearing migmatitic gneisses and vertical lenses of leucosome in strike-slip shear zones. We interpret U/Pb monazite ages of 315 +/- 4 Ma for the gneisses and 316 +/- 2 Ma for the leucosomes as the minimum age of high-grade metamorphism and migmatization respectively. These data suggest a spatial and temporal relationship between transpression, crustal melting, rapid exhumation and magma ascent, and cooling of high-grade metamorphic rocks.;Some granites emplaced in the strike-slip shear zone are bounded at their roof by low dip normal faults that strike N-S, perpendicular to the E-W trend of the belt. The abundant crustal magmatism provided a low-viscosity zone that enhanced Variscan orogenic collapse during continued transpression, inducing the development of normal faults in the transpression zone and thrust faults at the front of the collapsed orogen.
ISSN: 0040-1951

hal-00445260
https://hal.archives-ouvertes.fr/hal-00445260
DOI : 10.1016/j.tecto.2009.03.022

Éditeur(s) : HAL CCSD
Résumé : The evolution of mountain belt piedmont is controlled by interactions between tectonics, erosion and sedimentation. To study coupling between these processes, we analyze morphometric data collected in the eastern Tian Shan piedmont (NW China) and develop a new analogue modelling technique. The modeling approach uses an experimental set-up and analog material specifically designed to study simultaneously tectonic structures (faults, folds), detailed morphology (drainage basins, channels, alluvial fans, etc.) and stratified sedimentation. Measurement techniques based on laser interferometry and image correlation are also developed to quantify the topographic and kinematic evolution of models.
Our experiments allow a new approach for the study of piedmont morphotectonic evolution. Our results indicate that tectonics mainly controls this evolution. The propagation of deformation and the formation of relief both significantly influence the development of drainage networks, the evolution of drainage basins and the formation of morphotectonic markers. Particularly, a study of alluvial fans and watershed metrics suggests that there is a dynamical equilibrium between uplift, erosion and morphology. In addition, our results show that terrace nucleation is controlled by thrust activity and hydrography adjustments. Folding of terraces responds to a homothetic deformation pattern.
This new methodology brings promising perspectives in the fields of geomorphology, seismotectonics and sedimentology.
L'évolution d'un piémont de chaîne de montagnes est contrôlée par les interactions entre la tectonique, l'érosion et la sédimentation. Pour étudier ces processus, nous avons analysé des données morphométriques issues des piémonts orientaux du Tian Shan (NW Chine) et développé un nouveau type de modélisation analogique. Cette approche utilise un dispositif et un matériau expérimental spécialement conçus pour modéliser simultanément des structures tectoniques (failles, plis), une morphologie détaillée (bassins versants, rivières, cônes alluviaux, etc.) et une sédimentation stratifiée. Des techniques de mesure optique ont été également mises en oeuvre afin de quantifier l'évolution topographique et cinématique des modèles.
Les expériences réalisées offrent une opportunité inédite d'étudier l'évolution morphotectonique d'un piémont. Nos résultats montrent que la tectonique exerce un contrôle de premier ordre sur cette évolution. La propagation de la déformation et la formation des reliefs influencent en effet significativement le développement du réseau de drainage, l'évolution des bassins versants et la formation des marqueurs morphotectoniques. En particulier, l'analyse de la morphométrie des cônes alluviaux et de leurs bassins versants suggère qu'un équilibre dynamique s'installe entre la surrection, l'érosion et la morphologie. Nos résultats montrent également que l'apparition des terrasses est guidée par l'activité des chevauchements et les adaptations de l'hydrographie. Leur modèle de plissement répond à une déformation homothétique.
Cette nouvelle approche ouvre des perspectives d'étude prometteuses en géomorphologie, sismotectonique et stratigraphie.
https://tel.archives-ouvertes.fr/tel-00339145

tel-00339145
https://tel.archives-ouvertes.fr/tel-00339145
https://tel.archives-ouvertes.fr/tel-00339145v2/document
https://tel.archives-ouvertes.fr/tel-00339145/file/These_Graveleau08.pdf

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : Normal faulting mechanisms observed in the northern foothills of the Central–Western Pyrenees are remarkable, since one expects thrust faults at a convergent plate boundary. To understand the mechanisms involved, we used numerical modeling and investigated the impact of the following processes: gravitational potential energy associated with topography and dense crustal blocks; isostatic compensation in response to denudation and/or sedimentation. To decipher the effects of each process, we designed three model geometries and added a pre-existing weak fault where most of the seismicity occurs. To evaluate our model results, we derived the fault slip rate from the focal mechanisms in the region where we have the fault in our model. We found a slip rate of ∼15 m/Ma, which is in agreement with our modelling results. We conclude that flexural rebound induced by surface processes is able to explain the seismicity in Central–Western Pyrenees.
ISSN: 1631-0713

hal-01346028
https://hal.archives-ouvertes.fr/hal-01346028
https://hal.archives-ouvertes.fr/hal-01346028/document
https://hal.archives-ouvertes.fr/hal-01346028/file/Genti.pdf
DOI : 10.1016/j.crte.2015.08.004

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Zagros Simply Folded Belt (ZSFB) is an active fold-and-thrust belt resulting from the still continuing continental collision between the Arabian plate and the Iranian plate, which probably started in the Oligocene. The present-day shortening (N25°) is well documented by focal mechanisms of earthquakes and global positioning system (GPS) surveys. We propose in this study a comparison of published palaeostress markers, including magnetic fabric, brittle deformation and calcite twinning data. In addition, we describe the magnetic fabric from Palaeocene carbonates (10 sites) and Mio-Pliocene clastic deposits (15 sites). The magnetic fabrics are intermediate, with magnetic foliation parallel to the bedding, and a magnetic lineation mostly at right angles to the shortening direction. This suggests that the magnetic fabric retains the record of an early layer-parallel shortening (LPS) that occurred prior to folding. The record of LPS allows the identification of originally oblique folds such as the Mand Fold, which have developed in front of the Kazerun Fault. The shape parameter of the magnetic fabric indicates a weak strain compatible with the development of detachment folds in the ZSFB. The palaeostress datasets, covering the Palaeocene to Pleistocene time interval, support several folding episodes accompanied by a counter-clockwise rotation of the stress field direction. The Palaeocene carbonates in the ZSFB record a N47 LPS during early to middle Miocene detachment folding in the High Zagros Belt (HZB). The Mio-Pliocene clastic deposits recorded a N38 LPS prior to and during detachment folding within the ZSFB at the end of the Miocene-Pliocene. Similarly, fault slip and calcite twin data from the ZSFB also support a counter-clockwise rotation from NE to N20 between the pre-folding stage and the late rejuvenation of folds. This counter-clockwise trend of palaeostress data agrees with fault slip data from the HZB. During the late stage of folding in the ZSFB, the Plio-Quaternary palaeostress trends are consistently parallel to the present-day shortening direction.
Tectonic and stratigraphic evolution of Zagros and Makran during the Mesozoic-Cenozoic

hal-00545036
https://hal.archives-ouvertes.fr/hal-00545036
DOI : 10.1144/SP330.6

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
GPS data reveal that the Brahmaputra Valley has broken from the Indian Plate and rotates clockwise relative to India about a point a few hundred kilometers west of the Shillong Plateau. The GPS velocity vectors define two distinct blocks separated by the Kopili fault upon which 2–3 mm/yr of dextral slip is observed: the Shillong block between longitudes 89 and 93°E rotating clockwise at 1.15°/Myr and the Assam block from 93.5°E to 97°E rotating at ≈1.13°/Myr. These two blocks are more than 120 km wide in a north-south sense, but they extend locally a similar distance beneath the Himalaya and Tibet. A result of these rotations is that convergence across the Himalaya east of Sikkim decreases in velocity eastward from 18 to ≈12 mm/yr and convergence between the Shillong Plateau and Bangladesh across the Dauki fault increases from 3 mm/yr in the west to >8 mm/yr in the east. This fast convergence rate is inconsistent with inferred geological uplift rates on the plateau (if a 45°N dip is assumed for the Dauki fault) unless clockwise rotation of the Shillong block has increased substantially in the past 4–8 Myr. Such acceleration is consistent with the reported recent slowing in the convergence rate across the Bhutan Himalaya. The current slip potential near Bhutan, based on present-day convergence rates and assuming no great earthquake since 1713 A.D., is now ~5.4 m, similar to the slip reported from alluvial terraces that offsets across the Main Himalayan Thrust and sufficient to sustain a Mw ≥ 8.0 earthquake in this area.
ISSN: 0148-0227

hal-01115084
https://hal.archives-ouvertes.fr/hal-01115084
DOI : 10.1002/2014JB011196

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Zandjan province is situated in the NW of Iran, at the junction between the southern termination of the Tabriz right-lateral strike-slip fault and the western end of the Alborz active mountain range. Despite this key location, in terms of active tectonics, there is no destructive earthquake reported in available historical seismicity catalogues. Even if a few low magnitude instrumental earthquakes have been recorded indicating that this area is actively deforming, the Zandjan region can be considered as a seismic gap. Based on detailed field investigations, digital elevation models (DEMs), satellite image and aerial photo interpretations, we have identified a major active fault network affecting this regions. It is mainly constituted by several west and est verging thrust faults, trending NW-SE to N-S, that clearly cut Late Quaternary to Holocene deposits. Evidences in the morphology indicate also that they accommodate some right-lateral slip component. This fault network can be divided into four major fault zones affecting Zandjan city (present day population over 500,000) and part of the Zandjan-Mianeh basin more to the west. Based on fault geometrical characteristics (fault length, segmentation ... ) and kinematics, the Zandjan fault system is certainly capable to produce moderate to large earthquakes (Mw = 6.5-7.0) and serious damages in the Zandjan city and surrounding areas. The study of these faults is, then, of major interest for seismic hazard assessment in Zandjan province where total population exceed 1.5 million but also to better understand present day geodynamic of NW Iran.
ISSN: 0040-1951

hal-00617526
https://hal.archives-ouvertes.fr/hal-00617526
DOI : 10.1016/j.tecto.2011.04.012

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Calabro-Peloritan belt constitutes the eastward termination of the southern segment of the Alpine Mediterranean belt. This orogenic system was built up during the convergence between the Eurasian and the African plates, roughly directed North-South since the Upper Cretaceous. It was subsequently fragmented during the opening of the Western Mediterranean basins since Oligocene times. The curved shape of the Calabro-Peloritan belt was acquired during the opening of the Tyrrhenian basin since Tortonian. The origin, kinematics and significance of the Calabro-Peloritan tectonic pile are still debated. Our data in the Aspromonte Massif of Southern Calabria reveal an Alpine history marked by two main superimposed kinematic regimes. (i) A first phase corresponds to the piling up of basement nappes with a top-to-the-SE vergence, i.e in a direction orthogonal to the belt trend and towards the Adriatic foreland. This external vergence is similar to what is observed in both Northeastern Sicily and Northern Calabria. In Sicily, the age of nappe piling is Alpine, as evidenced by pinched slices of Mesozoïc sediments. In the Aspromonte Massif, thrusting age is less constrained. Our data suggest remnants of late Hercynian structuration before the Alpine stacking. (ii) A second phase corresponds to the thinning of the continental crust, dated at around 30 Ma by both geochronological and stratigraphical data. This extension is mainly localized on two low-angle detachment contacts, with top-to-the-NE displacement. The lower one corresponds to the reworking of the former main nappe contact. The upper one is a large detachment fault cutting across the pile from upper sedimentary levels down to metamorphic basement. Extension of similar Alpine age and similar internal vergence has been already recognized in other parts of the Calabro-Peloritan Arc: in the basement nappes of Northeastern Sicily and in the ophiolitic units of Northern Calabria. Coming back to the original geometry and position of the Calabro-Peloritan belt, before its bending and the opening of the Liguro-Provençal and Tyrrhenian basins, we evidence a homogeneous Oligocene NE-SW extension all along the Calabro-Peloritan segment of the Alpine Mediterranean belt. This tectonometamorphic history is best explained within the framework of the continuous Tertiary westward dipping subduction of the Tethyan oceanic domain below the European active margin and the progressive eastward retreat of the Apennine trench since Oligocene times.
ISSN: 0278-7407

hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182/document
https://hal.archives-ouvertes.fr/hal-00283182/file/Heymes_et_al_2008.pdf
DOI : 10.1029/2007TC002157

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Field evidence for syn-deformation migmatization and crystallization along the Karakorum fault contradicts the study of Wang et al. (2012). The ages of such magmatic rocks provide minimum ages for the onset of deformation at similar to 23 Ma in North Ayilari and similar to 19 Ma in Tangtse. The onset of deformation at 12 Ma in the Ayilari range inferred by Wang et al. (2012) from a muscovite Ar/Ar age is a cooling age, thus only a minimum age. The similar to 60 Ma granodiorite bodies, the ophiolitic rocks and the south Kailash thrust that are correlated across the fault to provide a 52 +/- 2 km finite offset do not define reliable piercing points. Such observations as well as our previous work concur to show that the Karakorum fault initiated in the Oligo-Miocene, and has a long-term dextral slip-rate between 7.5 and 13 mm/yr, approximately twice that proposed by Wang et al. (2012).
ISSN: 0012-821X

hal-00829469
https://hal.archives-ouvertes.fr/hal-00829469
DOI : 10.1016/j.epsl.2012.12.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The N-S oriented Raghane shear zone (8 degrees 30') delineates the western boundary of the Saharan metacraton and is, with the 4 degrees 50' shear zone, the most important shear zone in the Tuareg shield. It can be followed on 1000 km in the basement from southern Air, Niger to NE Hoggar, Algeria. Large subhorizontal movements have occurred during the Pan-African orogeny and several groups of granitoids intruded during the Neoproterozoic. We report U-Pb zircon datings (laser ICP-MS) showing that three magmatic suites of granitoids emplaced close to the Raghane shear zone at c. 790 Ma, c. 590 and c. 550 Ma. A comprehensive and detailed (158 sites, more than 1000 cores) magnetic fabric study was performed on 8 plutons belonging to the three magmatic suites and distributed on 200 km along the Raghane shear zone. The main minerals in all the target plutons do not show visible preferential magmatic orientation except in narrow shear zones. The AMS study shows that all plutons have a magnetic lineation and foliation compatible with the deformed zones that are zones deformed lately in post-solidus conditions. These structures are related to the nearby mega-shear zones, the Raghane shear zone for most of them. The old c. 793 Ma Touffok granite preserved locally its original structures. The magnetic structures of the c. 593 Ma Ohergehem pluton, intruded in the Aouzegueur terrane, are related to thrust structures generated by the Raghane shear zone while it is not the case of the contemporaneous plutons in the Assode-Issalane terrane whose structures are only related to the subvertical shear zones. Finally, the c. 550 Ma granite group has magnetic structure related to the N-S oriented Raghane shear zone and its associated NNE-SSW structures when close to them, but NW-SE oriented when further. These NW-SE oriented structures appear to be characteristic of the late Neoproterozoic evolution of the Saharan metacraton and are in relation to the convergence with the Murzuq craton. This evolution reflects the rheological contrast existing along the Raghane shear zone marking the western boundary of the Saharan metacraton.
ISSN: 0040-1951

hal-00429354
https://hal.archives-ouvertes.fr/hal-00429354
DOI : 10.1016/j.tecto.2009.04.022

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The outstanding exposure of deformation bands in a multilayer sequence of the Orange quarry, Provence, France, motivates a study investigating the development and controls of deformation band geometries by field mapping combined with finite element modeling. Field mapping yields new insights into angular relations between, and evolution of, the deformation bands as well as provides input parameters for the setup and boundary conditions of the numerical simulations using ADELI 2D. In particular, reverse-sense deformation bands are found to have developed within three of the four exposed layers of the multilayer stack with similar orientations to bedding, indicating layer-parallel contraction. Numerical simulations, carried out as a parametric study to investigate the influence on deformation band development and geometry, successfully reproduce the sequential development of deformation bands in the three layers as seen in the field as well as recreate the observed angular geometries of similar to 39 degrees to the maximum compression. This angular relationship is put into context with observations from other field studies and theoretical values to explore controls of deformation band orientations. Furthermore, band localization is impeded in the model by increased layer cohesive strength, demonstrating the importance of host-rock property variations on where localization of bands within the multilayer sequence. Results from both field investigation and numerical simulations are consistent with regional tectonics, where the strata underwent gentle folding due to thrust faulting at depth, and bring further insight into the development and geometry of deformation bands in both extensional and contractional tectonic regimes.
ISSN: 0148-0227

hal-00639452
https://hal.archives-ouvertes.fr/hal-00639452
DOI : 10.1029/2011JB008365

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The island of Taiwan is affected by intense seismic activity, which includes large events as the disastrous 1999 Chi-Chi earthquake. To improve seismic hazard assessment in this area, we estimate the effect of both interseismic loading and major events since 1736 on the state of stress of major active faults. We focus our approach on western Taiwan, which is the most densely populated part of Taiwan. We pay a specific attention to faults geometry and to both interseismic and coseismic slip distributions. Our results suggest that both earthquakes and interseismic loading before 1999 increase the Coulomb stress in the north-western part of the Chelungpu fault, a region which experienced the highest coseismic slip during the Chi-Chi earthquake. More importantly our results reveal a Coulomb stress increase in the southern part of the Changhua thrust fault, below a densely populated area.
ISSN: 0094-8276

hal-00475590
https://hal.archives-ouvertes.fr/hal-00475590
DOI : 10.1029/2009GL042292

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The interplay between tectonics and erosion has a predominant control on the evolution of the morphology of mountain belts. Here we investigate the modalities of deformation in Central Nepal on a c. 100 ka time scale in response to tectonic and external forcings, through the use of a finite-element thermomechanical model coupled with an integrative denudation formulation that accounts for fluvial incision and hillslope landsliding. We study the complex coupling existing between tectonics and erosion, with special emphasis on the influences of rock strength and rainfall distributions. Our results underline the key role played by lithologic variations in the elevation of both rivers and mean topography. We show that the location of the Main Frontal Thrust is mainly controlled by the low erodability of the unconsolidated sandstone in the Siwaliks Hills. As previously suspected (Burbank et al. 2003), our simulations demonstrate that the pattern of uplift in Nepal is mainly dependent on both erodability and fault geometry, rather than on rainfall distribution.
ISSN: 2041-4927

hal-01543331
https://hal-amu.archives-ouvertes.fr/hal-01543331
DOI : 10.1144/GSL.SP.2006.253.01.18

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
How convergent systems distribute strain among frontal thrusts is a major concern regarding seismic hazard assessment. Along the 2500 km Himalayan arc, the seismic behavior of the Bhutan region is unknown, because it corresponds to the only portion of the arc where no evidence of major earthquakes has been reported. This can be due either to the fact that no active tectonic studies have been conducted or to continental shortening being absorbed by the Shillong plateau 150 km farther south. Analyzing offset fluvial terraces in south-central Bhutan shows that two major earthquakes ruptured the Himalayan frontal thrust during the last millennium, and that a comparable rate of Holocene deformation (∼20 mm/yr) is accommodated across the Himalaya in Bhutan as in central Nepal. Thus, the propensity for great earthquakes in Bhutan is similar to what is observed in neighboring portions of the Himalaya arc. This in turn suggests that the shortening process beneath the Shillong plateau has little effect on how strain accumulates within the Bhutanese Himalaya.
ISSN: 0091-7613

hal-01122799
https://hal.archives-ouvertes.fr/hal-01122799
DOI : 10.1130/G35162.1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The strike-slip faults of north Tibet accommodate part of the Cenozoic convergence between India and Asia. Along the Karakax valley south of Yecheng and near the Xidatan trough south of Golmud, the active traces of the Altyn-Tagh and Kunlun faults follow narrow belts of metamorphic rocks. The deformation recorded in those mylonites is sinistral strike-slip. Rb/Sr and 40Ar/39Ar ages of deformation from syntectonic fabrics formed at 350–400°C 120 Ma. Argon loss suggests that deformation was associated to a 250–300°C thermal pulse that lasted 5–20 Ma after the onset of movement. Unroofing occurred much later, around 25 Ma when sudden cooling suggests a component of thrusting or more likely normal faulting. The Cretaceous shear may be related to collision between the Qiantang and the Lhasa blocks. The Karakax and Xidatan shear zones may have formed a unique, continuous boundary in the Cretaceous, which was later reused by the Tertiary strike-slip faults, leading to potentially calculable offsets along the Altyn-Tagh fault.
ISSN: 2169-9313

hal-00197562
https://hal.archives-ouvertes.fr/hal-00197562
https://hal.archives-ouvertes.fr/hal-00197562/document
https://hal.archives-ouvertes.fr/hal-00197562/file/Arnaud_JGR000904_def.pdf
DOI : 10.1029/2001JB000904

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fromthe Proterozoic to the Quaternary, the evolution of the Earthwas characterised by recurrent periods of glaciation.However, the margins of many ancient ice-sheets are poorly defined on palaeogeographic reconstructions.The extent and outlines of ancient ice sheets can be better understood through careful documentation ofsediments deposited at the ice-sheet margin. An outstanding example is provided herein based on an end-Ordovician archive in Libya (Tihemboka area, Murzuq Basin). The four sets of structures include: i) subglacialglaciotectonic structures and soft sediment deformations from flowing glacier ice, such as intraformational glacialstriae, intraformational deformation (shear planes, sheath folds), normal microfaults, and large-scaleglaciotectonic folds-and-thrusts; (ii) structures resulting from overpressured subglacial (meltwater) flowssuch as clastic dykes and tunnel valleys; (iii) proglacial depositional structures and facies related to highmagnitudemeltwater floods such as sandstone intraclasts, large-scale bedforms resulting from supercriticalflows, climbing-dune cross-stratification and kettle holes; and (iv) deformation structures resulting from freefloating and nonglacier ice such as ice-keel scours and ice-crystal marks. Such a set of structures points to anice-marginal (essentially continental) depositional setting, and provides an excellent suite of criteria to identifymargins of ancient ice sheets in the stratigraphic record. At a regional scale, a reconstruction through time andspace of the related depositional wedge is proposed. This corresponded to a seismic-scale (N120 m in thickness,40 km in length) ice-marginal wedge in front of an essentially warm-based ice-sheet inducing concomitantlarge-scale glaciotectonic deformation, glacial basin and tunnel valley downcuttings. The related ice-front wasassociated with high-energy meltwater flows feeding a network of deeply incised proglacial channels downstreamand, beyond them, a fluvioglacial deltaic system. Shallow ice-marginal permafrost most likely affectedthe depositional wedge. At a larger scale, the Tihemboka ice-marginal wedge is interpreted as related to a stillstandperiod over the Gondwana platform, developed over an estimated interval of a few thousands of years.Based on these data, the conditions that arose in a particularly favourable context for the development, the preservationand the identification of ice-marginal wedges in the geological record are reviewed. Significantmeltwater-derived sediment deposition and aggradation in an accommodation space resulting either frompreglacial inheritance, glacial downcuttings and/or glacio-isostatic lithospheric flexure, or active tectonic subsidence(>1 Myr) are required for their formation and subsequent preservation.
ISSN: 0012-8252

insu-01184739
https://hal-insu.archives-ouvertes.fr/insu-01184739
DOI : 10.1016/j.earscirev.2015.06.006

Éditeur(s) : HAL CCSD
Résumé : International audience
The Alboran Domain, situated at the western end of the Mediterranean subduction system, is characterized by theRonda Peridotites, one of the world largest exposures of sub-continental mantle. Using U-Pb (LA-ICP-MS) and Ar-Ar dating, we precisely dated two tectonic events associated with the Tertiary exhumation of the Ronda Peridotites.First, shearing along the Crust-Mantle Extensional Shear Zone caused, at ca. 22.5 Ma, mantle exhumation, localpartial melting in the deep crust and coeval cooling in the upper crust. Second, the Ronda Peridotites Thrusttriggered the final crustal emplacement of the peridotites onto the continental crust at ca. 21 Ma, as testified bygranitic intrusions in the thrust hanging-wall. The tectonic evolution of the western Alboran Domain is thereforecharacterized by a fast switch from a continental lithosphere extension in a backarc setting, with sub-continentalmantle exhumation, to a rift inversion by thrusting driven by shortening of the subduction upper plate
European Geosciences Union General Assembly 2017
Vienne, Austria

insu-01510393
https://hal-insu.archives-ouvertes.fr/insu-01510393

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Field study, thermochronology and geochemistry of the east Lungmu Co (LMC) range highlight some of the geological events that shaped western Tibet. The LMC fault zone has long been interpreted as the boundary between the Tianshuihai terrane of Laurasian affinity and the Qiangtang block of Gondwanian affinity. In the LMC range, the Paleozoic series is intruded by the Mangtsa leucogranite whose zircon have a U/Pb age of 116.9 ± 1 Ma and by mafic rocks with U/Pb zircon ages ranging from 116.9 ± 1 to 95.1 ± 1.7 Ma. Geochemistry of the mafic rocks indicates that they have been emplaced in a supra-subduction zone setting, probably the north dipping Nujiang suture zone. 40Ar/39Ar micas ages of the granite indicate that cooling below ~ 350 °C occurred between 105 and 85 Ma. 40Ar/39Ar K-feldspar data suggest a fast cooling event at 60-55 Ma, which we relate to the reactivation of the LMC suture zone as a thrust at the onset of the India-Eurasia collision. The last, and still active, deformation event corresponds to left-lateral strike-slip faulting along the ENE-WSW LMC fault.
ISSN: 1342-937X

hal-00660491
https://hal.archives-ouvertes.fr/hal-00660491
DOI : 10.1016/j.gr.2011.07.026

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : New-Caledonia island consists of an ultramafic nappe thrusted over a continental and arc-derived basement as the result of the closure of a back-arc basin during the upper Eocene. The morphology of New-Caledonia is mostly characterized by its elongated shape and rectilinear coastline. Indeed, the western and eastern edges of the island are delineated by N140 trending normal faults that are well imaged on seismic lines. Major tectonic lineaments onland, including the scarps corresponding to the main boundary of the ultramafic nappe, also trend N140 suggesting a morphotectonic control by faults having similar kinematics (longitudinal flexure-fault of previous authors). We provide detailed observations from some of these scarps demonstrating indeed that these are not erosional features in origin. We explore the possibility that such surfaces do represent major tectonic limits that accommodated extension and significant tectonic thinning of both the peridotite nappe and its basement. Remnants of a complex extensional fault zone, 200 m wide, are still preserved along the western scarp of the Mont Dore mountain, close to Noumea city. The deformed zone is composed of an early shallow dipping detachment fault, some decimeters thick, offset by a group of late high angle normal faults and is bounded by cataclastic breccias that progressively pass into the fractured host peridotite. The late high angle fault zones have been the site of important syn-tectonic fluid circulation and are underlined by cm-thick silica infills bearing vertical striae. Typical morphology of the main scarps with break of slope is related to the combination of high angle normal faults and low angle detachment. Similar shallow dipping detachment surfaces have been observed along the east coast of southern New-Caledonia as well as within the ultramafic nappe itself and its basement. This study confirms that N140 oriented, large fault zones, with pure-normal to transtensional component of displacement, controlled the morphotectonic evolution of New-Caledonia at the regional scale, after the obduction of ophiolite nappe at the end of the Eocene. Such a fact has to be taken into account when attempting to reconstruct the post-obduction evolution of the island and more particularly when considering the development and distribution of the Ni-rich lateritic surfaces.
EISSN: 1777-5817

hal-00411855
https://hal.archives-ouvertes.fr/hal-00411855
DOI : 10.2113/gssgfbull.179.3.315