Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
PurposeMarine mangrove sediments in the Manche-à-Eau lagoon (Guadeloupe, Caribbean Sea) harbor locally extensive, white microbial mats. These mats cover the surface of reduced sediments near the roots of red mangrove trees, Rhizophora mangle, and are mainly composed of sulfur-oxidizing bacteria belonging to the Beggiatoaceae family, with some filamentous cyanobacteria. The goal of this study was to investigate the possible influence of sediment characteristics on the presence of these microbial mats.Materials and methodsFour push cores were collected in April 2013, two from zones with microbial mats and two from zones without mats. Sediment characteristics (grain-size distribution, mineralogy, total organic carbon (TOC) and total nitrogen (TN) contents, atomic TOC/TN ratios, and organic matter (OM) δ13C values) were compared for all four cores.Results and discussionSignificant differences were observed between sediments below microbial mats and those without mats. Sediments with microbial mats contained greater amounts of clay, and higher TOC, TN, and TOC/TN ratios, with lower total carbonate content and δ13C values. The higher clay content most likely results from lower fluid flow velocity near to mangrove roots, while higher TOC/TN ratios and lower δ13C values indicate higher inputs of OM from mangrove trees. These results are consistent with the fact that microbial mats were observed near the roots of mangrove trees, which trap OM from terrestrial vegetation and fine sediments.ConclusionsThe grain-size distribution of sediment particles, the total carbonate content, and the δ13C values are the main parameters discriminating between zones with microbial mats and those without mats. Variations in total carbonate content, which is mainly of biogenic origin, result from conditions that are more favorable for benthic organisms in zones without microbial mats. Variations of the TOC/TN ratios are controlled by the presence of a non-negligible amount of inorganic nitrogen bound to surface clay mineral particles and/or by microbial processes.
ISSN: 1439-0108

hal-01545903
https://hal.archives-ouvertes.fr/hal-01545903
DOI : 10.1007/s11368-016-1555-6

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : The seismology is the most effective method to explore the Structure of subduction zones to great depth. The distinguishing feature of the mantle in the subduction regions is the presence of hydrated phases, which transport water into the Earth's interior and release it with dramatic local consequences, triggering earthquakes and melting. The seismological detection of these hydrous phases and geo-dynamic interpretation of flow in the hydrous mantle depend on knowledge of the anisotropic elastic properties and the characteristics of the wave propagation in anisotropic media. In this paper we briefly recall the distinguishing features of anisotropic wave propagation and the observable parameters. We suggest the Vp/Vs ratio is a physically sound parameter than can be observed by seismology in anisotropic regions of the Earth, whereas the Poisson's ratio, which is often quoted, is not directly observable and does not correspond to the characteristics of wave propagation in an anisotropic or isotropic medium. We report for the first time the ratios of Vp/Vs1 and Vp/Vs2, where Vs1 is the fastest and Vs2 slowest S-wave velocities of an anisotropic media. We present the current knowledge of the anisotropic seismic properties of hydrous minerals in the upper mantle, transition zone, and lower mantle that are stable along low temperature geotherms associated with subduction, and identify which minerals are likely to influence seismological observations because they have very high volume fractions, or very high anisotropies, or both of these.;In the upper mantle antigorite and talc are exceptionally anisotropic (Vp 71% Vs 68% and Vp 65%, Vs 68%, respectively) and chlorite is also very anisotropic for S-waves (Vp 35%, Vs 76%). Comparatively less anisotropic are hornblende (Vp 27%, Vs 31%), used as proxy for tremolite in subduction zones, and clinohumite (21.8%, Vs 15.9%). Brucite at 4 GPa (Vp 26.5%, Vs 30.9%) and the dense hydrogen magnesium silicate (DHMS) phase A at 9GPa (Vp 9.3%, Vs 17.6%) are the only hydrous minerals stable in the upper mantle that have had their elastic properties measured at in situ mantle pressures. Except for the phase A, all these minerals are more anisotropic than olivine for at least one parameter (Vp, Vs, Vp/Vs1, or Vp/Vs2). In the transition zone the major phases hydrous wadsleyite and ringwoodite C have moderate to weak anisotropies (Vp 16.3%, Vs 16.5%, and Vp 1.9%, Vs 4.4%, respectively). The DHMS Superhydrous B has a moderate anisotropy (Vp 6.9%, Vs 11.6%). At greater depth the DHMS phase D Lit 24 GPa (Vp 10.8%, Vs 18.0%) is the only hydrous phase that can transport hydrogen from the transition zone into the lower mantle. The phase D is more anisotropic for S than P waves like many of the hydrous phases. From these data it is clear that hydrous phases are in general very anisotropic. However, pressure can play a strong role in reducing anisotropy. It is the case for brucite and talc, in which increasing pressure from ambient to 4 GPa reduces the anisotropy by about 50% for both P and S waves. In contrast, the anisotropy of the DHMS phase A does not change significantly with pressure.;Our picture of the seismic anisotropy of hydrated minerals remains incomplete; the elastic properties of many have not been measured even at ambient conditions (e.g., 10 angstrom phase and phase E) or not measured in their true elastic symmetry (e.g., clinochlore). The majority of hydrous minerals have not been measured at high pressure. and none related to hydrated mantle have been measured at elevated temperature. We have shown in the few cases where hydrous minerals have been measured as a function of pressure, that this variable has an important effect oil the velocity distribution and in most cases reduces the degree of anisotropy, hence we Would expect seismic anisotropy to play a key role in the determination of the shallow structure of subduction zones in the upper mantle.
Subduction zone geodynamics

hal-00420893
https://hal.archives-ouvertes.fr/hal-00420893

Éditeur(s) : Université Nice Sophia Antipolis
Résumé : The Lesser Antilles is a case study of a very slow subduction (~2 cm/yr) of an old oceanic lithosphere (~84-100 Ma). The region presents a relatively low seismic activity, especially along the interplate contact, and the seismic hazard associated with a possible mega-thrust earthquake is still poorly known. This PhD thesis is a first step toward assessing the ability of the Lesser Antilles subduction zone to produce such a large subduction event. To do so, it aims at constraining the downdip width of the interplate's seismogenic zone. The lack of coverage of permanent seismological stations is a major limitation in the exploration of the Lesser Antilles subduction zone. It is due to the presence of only small aligned islands at far distances from the potentially seismogenic interplate area. Several oceanographic cruises were therefore planned that notably allowed the repeated deployment of ocean bottom seismometers; some of them being left for a few months of background seismicity recording. This thesis specifically focuses on two sets of wide-angle seismic data acquired offshore the Dominica and Martinique islands. From their analysis 3D and 2D tomographic models were produced respectively over the forearc region and across the whole subduction complex. These models constrain the plates' seismic structure as well as their geometry. They allow the discussion of how the imaged structures affect the subduction processes and give a first estimation of the downdip width of the seimogenic zone, defined as the segment of the interplate between the backstop and the upper plate's Moho. The joint interpretation of seismic models and earthquake localizations then refine this first assessment. Epicenter distribution from height months of seismic recording shows indeed that seismicity concentrates within the inner forearc region. The strong velocity gradient that characterize its basement suggests it is denser and more rigid than the more deformable outer forearc basement. The updip limit of the seismogenic zone could then lie arcward of the backstop at the contact of the interplate and the seaward end of the inner forearc crust. At depth, interplate earthquake mechanisms are observed between 35 and 45 km depth and interpreted to have occurred at the downdip limit of the seismogenic zone. The latter could reach a depth over 10,km deeper than the contact of the upper plate's Moho with the interplate, and therefore lie within the mantle wedge. All together, these results imply a large downdip width of the seismogenic zone (~70 km) offshore the Dominica and Martinique islands. Further work is, however, needed in order to fully comprehend the ability of the Lesser Antilles subduction zone to produce a possible mega-thrust earthquake. This would necessitate the evaluation of seismic coupling at the interplate contact and the possible segmentation of the seismogenic zone, for instance, due to the subduction of oceanic ridges.
Les Petites Antilles présentent un contexte géodynamique caractérisé par la subduction à très faible vitesse (~2 cm/an) d'une lithosphère océanique âgée (~84-100 Ma). L'activité sismique y est relativement faible, notamment à l'interplaque, où l'aléa sismique lié à un éventuel séisme de méga-chevauchement reste encore mal contraint. Cette thèse se veut être une première étape dans l'évaluation de la capacité de la zone de subduction des Petites Antilles à générer un tel évènement. Dans ce but, ces travaux tentent d'appréhender l'extension en profondeur du domaine sismogène de l'interplaque. Le manque de couverture des stations sismologiques permanentes est un inconvénient majeur dans l'exploration des Petites Antilles. Il s'explique en raison du peu de terres émergées et de leur éloignement de la zone potentiellement sismogène de l’interplaque. La région a donc fait l'objet de plusieurs campagnes océanographiques qui ont permis, notamment, le déploiement de sismomètres fond de mer (OBS); certains instruments étant restés immergés plusieurs mois afin de procéder à une écoute de la sismicité. Les travaux réalisés au cours de cette thèse se sont focalisés sur deux jeux de données de sismique grand-angle acquis au large des îles de la Dominique et de la Martinique. Leur analyse a permis la construction de modèles tomographiques 3D et 2D respectivement à l'échelle de l'avant-arc et de l'ensemble de la subduction. Ces modèles renseignent sur la structure sismique des plaques en convergence ainsi que sur leur géométrie. Ils permettent de discuter le rôle de la structure dans le fonctionnement de la subduction et d’obtenir une première estimation de l'extension en profondeur de la zone sismogène en considérant la portion de l'interplaque comprise entre le butoir et le Moho de la plaque supérieure. Dans un second temps, l'interprétation conjointe des modèles tomographiques et des localisations des séismes locaux a permis d'affiner cette estimation. Huit mois d'enregistrement de la sismicité montrent en effet une concentration des épicentres dans la région interne de l’avant-arc. Celle-ci présente un socle épais, à fort gradient de vitesse interprété comme plus dense et rigide que le socle de la région externe de l'avant-arc, plus déformable. La limite amont de la zone sismogène pourrait donc se situer en retrait de la position du butoir au contact de l'interplaque et de la limite entre ces deux zones de l'avant-arc. En profondeur, des mécanismes interplaques sont observés entre 35 et 45 km et interprétés comme des marqueurs de la limite aval de la zone sismogène. Cette dernière pourrait donc atteindre une profondeur jusqu'à 10 km supérieure à la limite précédemment évoquée et se trouver, par conséquent, au contact du manteau lithosphérique. L'ensemble de ces résultats suggèrent une extension en profondeur de la zone sismogène (i.e une largeur) de près de 70 km face aux îles de la Dominique et de la Martinique. Ces travaux doivent cependant être poursuivis afin d’évaluer pleinement la capacité de la zone de subduction des Petites Antilles à générer un éventuel séisme de méga-chevauchement. Le taux de couplage à l'interplaque doit être précisé ainsi que sa possible segmentation en lien, par exemple, avec à l'entrée en subduction des rides océaniques.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00172/28335/26628.pdf
http://archimer.ifremer.fr/doc/00172/28335/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use 3-D mechanical modeling representing faults as planar surfaces with frictional properties that obey Coulomb-failure process to explore the long-term slip rates of the Altyn Tagh fault and Kunlun faults in the north Tibetan plateau. Crustal theology is simplified as an elastoplastic upper crust and a viscoelastic lower crust. Far-field GPS velocities and late Quaternary fault slip rates are used to constrain the model results. Rheological tests show that effective fault friction lower than 0.1-0.08 leads to high slip rates that fit with geologically and geodetically determined slip rates of the Kunlun fault (10-11.7 +/- 1.5 mm/yr). Meanwhile, the modeled Altyn Tagh fault reaches slip rates similar to 13.7 mm/yr to similar to 7.8 mm/yr in its central portion, between ranges of the geological slip rates. Associated with high slip rates, our model predicts that central Tibet (similar to 84 degrees E-95 degrees E) from the Altyn Tagh fault to the north of the Himalayan arc accommodates north-south shortening and east-west extension rates of similar to 10-12 mm/yr and similar to 8-10 mm/yr, respectively. We also question the widely accepted idea that interseismic strain is driven at the base of the seismogenic zone by a screw dislocation. If this assumption fails, the presented model implies that interseismic strain around large strike-slip faults could be distributed in a much broader way if the lithosphere deforms as a thin elastic plate rather than an elastic half-space with an embedded dislocation. If this distributed deformation is ignored, and the instantaneous surface deformation field modeled as that resulting from slip on a dislocation below a specified depth embedded in an elastic half-space, the estimated slip rate will inevitably be lower than the true long-term slip rate. This appears to explain why geodetic slip rates proposed for the Altyn Tagh fault (510 mm/yr) are lower than some of the geological slip rates. (C) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00411926
https://hal.archives-ouvertes.fr/hal-00411926
DOI : 10.1016/j.epsl.2008.06.049

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Peridotite xenoliths brought up to the surface by the volcanism of the Kerguelen Islands represent a mantle that has been affected by a high degree of partial melting followed by intense melt percolation above the Kerguelen plume. These xenoliths are therefore particularly suitable to investigate effects of melt-rock interaction on crystallographic fabrics (lattice-preferred orientation (LPO)) of peridotite minerals and on the LPO-induced seismic properties of peridotites above a mantle plume. We have studied a suite of 16 ultramafic samples representative of different degrees of partial melting and magma-rock interaction among which the protogranular harzburgites are the least metasomatised xenoliths and dunites are the ultimate stage of metasomatism. Olivine LPO is characterized by high concentration of [010] axes perpendicular to the foliation and [100] axes close to the lineation or distributed in the foliation plane in harzburgites, whereas the high concentration of [100] axes is parallel to the lineation and [010] axes is perpendicular to the assumed foliation in dunites. Olivine LPO in harzburgites is interpreted as being due to a deformation regime in axial compression or transpression. The fabric strength of olivine decreases progressively from protogranular to poikilitic harzburgites and finally to dunites, for which it remains nevertheless significant (J index 3.8). Seismic properties calculated from LPO of minerals indicate that metasomatism at higher melt/rock ratio lowers the P wave velocities. The most significant difference between harzburgites and dunites corresponds to the distribution of S wave anisotropy. Harzburgites display the maximum of anisotropy within the foliation plane and the minimum of anisotropy perpendicular to the foliation plane, whereas the lowest anisotropy is parallel to the lineation for dunites. These modifications of seismic properties as a result of metasomatic processes may induce seismic heterogeneities in the mantle above the Kerguelen plume. In addition, assuming a lithospheric mantle primarily harzburgitic and structured with a horizontal foliation, the seismic properties calculated for the Kerguelen xenoliths reconcile the rather high anisotropy evidenced by the horizontally propagating surface waves with the apparent isotropy revealed by the absence of splitting of vertically propagating teleseismic SKS waves recorded by the GEOSCOPE Kerguelen station.
ISSN: 1525-2027

hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222/document
https://hal.archives-ouvertes.fr/hal-00366222/file/bascou_Kerguelen_2007GC001879_hal.pdf
DOI : 10.1029/2007GC001879

Éditeur(s) : HAL CCSD
Résumé : Annual report
We present here the results of CRS reprocessing of a 3D real dataset acquired in 2001 on the Tournemire site in France, which is an experimental site for the Institut de Radioprotection et de Sûreté Nucléaire (IRSN) to test geophysical imaging process in the context of geological nuclear waste storage. The main objective was to evaluate the ability of the methodology to recognize, in the carbonate cover of the experimental site clay layer, the prolongation of weak vertical-displacement faults seen in a tunnel within that clay layer. Previous seismic processing using the conventional common midpoint (CMP) approach did not provide satisfactory results in this cover, although the fault has beenrecognized in the carbonates underlying the clay layer. An original strategy was elaborated to define the best-possible parameters of the 3D Common-Reflection-Surface (CRS) stack. The procedure in- cluded refining the velocity search along a velocity guide, using a first CRS stack as the base of a subsequent curvature-parameter search, or a parameter smoothing before stacking. An optimal ap- proach was elaborated on a subset of the data, and furthermore applied to the whole dataset. The resulting image shows improved event continuity in the carbonate cover, which allowed for horizon picking after depth migration, as well as the estimation of post-stack geometrical attributes, such as coherency. The processing indicates a zone of degraded quality of reflection events lying in the N-S direction, above the known fault zone within the underlying formations. Such feature corresponds to an alteration zone at the earth surface. Further investigation at a higher resolution scale is planned to confirm whether this zone could be a spot of possible leakage
https://hal.archives-ouvertes.fr/hal-00857376

hal-00857376
https://hal.archives-ouvertes.fr/hal-00857376

Éditeur(s) : HAL CCSD
Résumé : poster
International audience
Locations for earthquake recorded in the Lesser Antilles subduction zone are processed separately by regional observatories, NEIC and ISC. There is no earthquake location catalog available compiling all available phase arrival data. We propose a new best complete earthquake catalog by merging all available phase arrival data for better constrains on earthquake locations. ISC provides the phase arrival data of 29243 earthquakes (magnitude range from 1.4 to 6.4) recorded by PRSN (Porto Rico), SRC (British West Indies), and from FUNVISIS (Venezuela). We add phases data from IPGP observatories for 68718 earthquakes from magnitudes 0.1 to 7.5 (OVSG, Guadeloupe, recorded 53226 earthquakes since 1981, and OVSM, Martinique, recorded 29931 earthquakes since 1972). IPGP also provides the accelerometer waveform data of the GIS-RAP network. We achieved automatic picking on the GIS-RAP data using the Component Energy Correlation Method. The CECM provides high precision phase detection, a realistic estimation of picking error and realistic weights that can be used with manual pick weights. The CECM add an average of 3 P-waves and 2 S-waves arrivals to 3846 earthquakes recorded by the GIS-RAP network since 2002. The final catalog contains 84979 earthquakes between 1972 and 2013, 24528 of which we compiled additional data. We achieve earthquake location using NonLinLoc, regional P and S waves data and a set of one dimensional velocity models. We produce improved locations for 22974 earthquakes (better residuals, on equal or larger arrival dataset) and improved duration magnitudes for 6258 earthquakes (using duration data and improved locations). A subset of best constrained 15626 hypocenters (with more than 8 phases and an average RMS of 0.48_0.77s) could be used for structural analysis and earthquake local tomography. Relative locations are to be applied in order to image active faulting. We aim to understand coupling in the seismogenic zone as well as triggering mechanisms of intermediate depth seismicity like fluid migration beneath the volcanic arc.
Geophysical Research Abstracts
Vienne, Austria

hal-01059207
https://hal-brgm.archives-ouvertes.fr/hal-01059207

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : Hydraulic habitat models based on the preferences of species for the hydraulic characteristics of their microhabitats are frequently used to evaluate the impact on the habitat of a change in river flow regime. Their application in a tropical insular environment is still limited as little is known about the hydraulic preferences of species. Hydraulic preference models have been developed for 15 taxa (diadromous shrimps and fishes) sampled in 52 rivers in the Caribbean (the French West Indies) and the Indian Ocean (the Reunion island). Five datasets were used and group 8353 samples collected by electrofishing during 320 surveys (reach date) performed between 1999 and 2011. Generalized additive models were used to link variations of taxa density within surveys to the hydraulic characteristics of the microhabitat (velocity, depth and substrate). Hydraulic preferences within each region (Caribbean and Indian Ocean) are significant for most of the taxa and vary little between rivers and surveys. The hydraulic variables explain up to 18.1% (univariate models) and 30.0% (multivariate models) of the deviance of densities within survey. Of the taxa selected, Atya scabra, Macrobrachium heterochirus, Xiphocaris elongata and the Sicydiinae are the most demanding.
ISSN: 1535-1459

hal-01072479
https://hal.archives-ouvertes.fr/hal-01072479
https://hal.archives-ouvertes.fr/hal-01072479/document
https://hal.archives-ouvertes.fr/hal-01072479/file/ly2014-pub00038946.pdf
DOI : 10.1002/rra.2675

Éditeur(s) : Springer
Résumé : Large benthic foraminifers are considered to be good indicators of shallow marine carbonate environments in fossil series. Over the last 50 years, the palaeoenvironment of Tertiary Nummulites accumulations has been a matter of debate, particularly because of difficulties in interpreting these deposits, and in this way, the absence of analogues in present-day seas does not help. The aim of this paper is to insight the different ways Nummulites tests and clasts may accumulate according to their hydrodynamic behaviour. Based on experimental measurements and on SEM observations, it appears that the high primary skeletal porosity of Nummulites made them easily transportable. The calculated threshold shear velocities confirm that large-sized Nummulites can be moved by weak wave-driven currents. This peculiar hydrodynamic behaviour of Nummulites could explain the diversity of depositional models. Depending on local hydrodynamic conditions, autochthonous Nummulites deposits can be preserved as in situ winnowed bioaccumulations or be accumulated offshore, onshore or alongshore, away from the original biotope.
Facies (0172-9179) (Springer), 2006-05 , Vol. 52 , N. 2 , P. 221-235

Droits : Springer-Verlag 2005
http://archimer.ifremer.fr/doc/00085/19597/17234.pdf
DOI:10.1007/s10347-005-0035-z
http://archimer.ifremer.fr/doc/00085/19597/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The northern Canadian Cordillera (NCC) is an active orogenic belt in northwestern Canada characterized by deformed autochtonous and allochtonous structures that were emplaced in successive episodes of convergence since the Late Cretaceous. Seismicity and crustal deformation are concentrated along corridors located far (>200 to ~800 km) from the convergent plate margin. Proposed geodynamic models require information on crust and mantle structure and strain history, which are poorly constrained. We calculate receiver functions using 66 broadband seismic stations within and around the NCC and process them to estimate Moho depth and P-to-S velocity ratio (Vp/Vs) of the Cordilleran crust. We also perform a harmonic decomposition to determine the anisotropy of the subsurface layers. From these results, we construct simple seismic velocity models at selected stations and simulate receiver function data to constrain crust and uppermost mantle structure and anisotropy. Our results indicate a relatively flat and sharp Moho at 32 ± 2 km depth and crustal Vp/Vs of 1.75 ± 0.05. Seismic anisotropy is pervasive in the upper crust and within a thin (~10–15 km thick) sub-Moho layer. The modeled plunging slow axis of hexagonal symmetry of the upper crustal anisotropic layer may reflect the presence of fractures or mica-rich mylonites. The subhorizontal fast axis of hexagonal anisotropy within the sub-Moho layer is generally consistent with the SE-NW orientation of large-scale tectonic structures. These results allow us to revise the geodynamic models proposed to explain active deformation within the NCC.
ISSN: 2169-9313

Droits : info:eu-repo/semantics/OpenAccess
hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550/document
https://hal.archives-ouvertes.fr/hal-01685550/file/Tarayoun_et_al-2017-Journalsur Geophysical_Research__Solid_Earth.pdf
DOI : 10.1002/2017JB014284

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
A network of 26 GPS sites was implemented in Iran and Northern Oman to measure displacements in this part of the Arabia–Eurasia collision zone. We present the GPS velocity field obtained from three surveys performed in 1999 September, 2001 October and 2005 September and the deduced strain tensor. This study refines previous studies inferred from only the two first surveys. Improvements are significant in NE Iran. The present-day shortening rate across the mountain belts of NE Iran is estimated to 5 ± 1 mm yr−1 at about N11°, 2 ± 1 mm yr−1 of NS shortening across the eastern Kopet Dag and 3 ± 1 mm yr−1 of NS shortening across Binalud and Kuh-e-Sorkh. Our GPS measurements emphasize the varying character of the Kopet Dag deformation between its southeastern part with prevailing thrusting at low rates and its northwestern part with dominant strike-slip activity at increasing rates. The principal axes of the horizontal strain tensor appears very homogeneous from the Zagros to the Alborz and the Kopet-Dag (N20°) and in eastern Iran (Makran and Lut block: N30°). Only NW Iran suffers a variable strain pattern which seems to wrap the Caspian basin. The strain tensor map underlines the existence of large homogeneous tectonic provinces in terms of style and amplitude of the deformation.
ISSN: 0956-540X

insu-00346744
https://hal-insu.archives-ouvertes.fr/insu-00346744
DOI : 10.1111/j.1365-246X.2007.03477.x

Éditeur(s) : HAL CCSD World Scientific
Résumé : The present paper presents a laboratory experiment of rip current circulations over a moveable bed. The rip current characteristics over four distinct beach morphologies, exhibiting more or less developed nature-like bar-rip morphology,were investigated. For each video run, the same off shore shore-normal waves were generated by the wave maker with the same mean water level in order to study the sensitivity of the rip current characteristics as a function of the beach morphology only. In each case, a 1-hour video run was used to track a large number (~30) of drifters released within the surf zone. Image coordinates were then rectifie d to still water level Cartesian coordinates to compute drifter velocities, mean characteristics and surf zone rete ntion rates. Results show the presence of classic rip current patterns with counter-rotating cells and a relatively narrowoffshore-directed jet with, for three of the situations, a reasonably symmetric shape. Non-surprisingly, it was found that rip current intensity increases with increasing relative depth of the rip channel. The wave-driven circulations were strongly unstable. Computed standard deviation in fl ow intensity and direction provides high resolution information on the spatial variability of the rip current insta bilities with, for instance, highly-pulsating and weakly directionally variable offshore-directed flow in the rip channel. Conversely to what was previously hypothesized in the literature, there was hardly trace of vortices being shed offs hore and drifters exiting the surf zone compartment were not systematically caught by a pulsating jet. The cause for drifter exiting the semi-enclosed surf zone compartment remains, however, elusive and deserves further investigations. The computed surf zone retention rates (~90%) were of the order of those previously observed in the field, with no clear relationship with the mean rip current velocity or relative depth of the rip channel. Further video-runs will have to be analyzed to explore potential explanations
Proceedings of Coastal Dynamics 2009 Impacts of Human Activities on Dynamic Coastal Processes

ISBN : 978-981-4282-46
hal-00854534
https://hal.archives-ouvertes.fr/hal-00854534

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper aims to demonstrate that the use of a modern tool, the GPS (Global PositioningSystem), can significantly improve our understanding of active faults and their seismic cycle. We focus on theNorth-Caribbean plate boundary, specifically in the Dominican Republic, and present some quantificationsof velocities that result from measurements that have been made possible by the instrumentation of the areaby a consortium of researchers from France, the USA and the Dominican Republic, since 1994. Then, wediscuss the velocities in terms of seismic potential of the regional major faults.
Cet article présente comment l'utilisation d'un outil moderne, le GPS (Global Positioning System) peut apporter des éléments significatifs dans la connaissance des failles actives et de leur cycle sismique. Nous nous intéressons ici à la frontière de plaque Nord-Caraibe, en République Dominicaine, et présentons des quantifications de vitesses de déplacement obtenues grâce à l'instrumentation de la zone depuis 1994 par un groupe de chercheurs français, états-uniens et dominicains. Les résultats sont ensuite discutés en termes d'aléas sismologiques des failles majeures.
ISSN: 2551-6116

hal-01537725
https://hal.univ-antilles.fr/hal-01537725
https://hal.univ-antilles.fr/hal-01537725/document
https://hal.univ-antilles.fr/hal-01537725/file/Mazabraud-et-Forissier-2007.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
In Taiwan, about one third of the lithospheric plate convergence between Eurasia and the Philippine Sea plate is accommodated on the eastern coast across the narrow Longitudinal Valley (LV). The Longitudinal Valley Fault (LVF) is the main seismically active fault zone in this region. However, the spatial distribution of ground deformation due to interseismic loading on locked fault segments remains widely unknown. To address this problem, we use a "permanent scatterer" (PS) interferometric synthetic aperture radar (InSAR) approach for processing the ERS satellite archives. The PS mean velocity maps allow accurately mapping and quantifying the ground deformation all along the LV. Assuming that, close to the surface, the fault plane along the central LVF creeping segment dips 55 degrees to the east, we derive a slip vector at the surface of similar to 25 mm/yr with a mean rake of 70 degrees. In agreement with our PS observations, shallow seismicity indicates a clear change in the fault mechanical behavior of the creeping segment around Fuli town. Finally, we propose a combination of the PS velocity fields for estimating a 3-D map of ground deformation. In the southern part of the LV, the vertical component reveals an uplift of the Coastal Range with respect to the LV of similar to 10 mm/yr. Moreover, between Taitung and Luyeh, the vertical deformation is essentially accommodated along the Luyeh Strand. Finally, north of Rueisuei, the Coastal Range uniformly subsides at similar to 15 mm/yr relative to the western side of the LV. However, a local uplift pattern is detected around latitude 23 degrees 42'.
ISSN: 0148-0227

hal-00595532
https://hal.archives-ouvertes.fr/hal-00595532
DOI : 10.1029/2010JB007898

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The correlation between the flow turbulence and the performances of a ma- rine current turbine is studied. First, the incoming flow encountered in the flume tank is characterized in the framework of fully developed turbulent cascades in the inertial range. The Reynolds number, the Kolmogorov dissipation scale and the integral scale, are estimated from flow measurements. The intermittency of the turbulence is characterized in the lognormal multifractal framework, and the influence of the turbulent flow on the turbine power is assessed. The rotor speed control unit characteristics used for the turbine regulation induces non-negligible effects on the turbine behavior under fluctuations loads. Even if the power spectrum does not reveal any scale invariance, a multiscale analysis allows us to show the correlations between the turbulence time se- ries and the power produced. The classical Mean Square Coherency function shows that for scales larger than 10 seconds, the upstream velocity and power have large correlations. In the framework of the Empirical Mode Decomposition method, such correlations are studied using the time-dependence intrinsic corre- lation analysis method. This method allows to zoom into time-frequency scales where the flow perturbations induced some modifications in power production
ISSN: 0960-1481

hal-01528296
https://hal.archives-ouvertes.fr/hal-01528296
DOI : 10.1016/j.renene.2017.05.024

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We report measurements of long-period P wave polarization (P pol) in Australia and Tahiti made by combining modeling of the polarization deviation and harmonic analysis. The analysis of the deviation of the horizontal polarization of the P wave as a function of event back azimuth may be used to obtain information about (1) sensor misorientation, (2) dipping discontinuities, (3) seismic anisotropy, and (4) velocity heterogeneities beneath a seismic station. The results from harmonic analysis and a grid search using Snell's law suggest the presence of a dipping seismic discontinuity beneath stations CTAO and CAN in Australia. These results are consistent with published receiver function studies for these stations. The P pol fast axis orientation is close to the N–S absolute plate motion direction at station TAU (Tasmania), which may be due to plate-motion-driven alignment of olivine crystals in the asthenosphere. Interestingly, measurements of SKS splitting at Tahiti (French Polynesia) show an apparent isotropy, whereas an inversion of P pol observations at PPTL seismic station located in Tahiti suggests the presence of two anisotropic layers. The fast axis azimuth is oriented E–W in the upper layer, and it is close to the NW–SE orientation in the lower layer. Since P pol orientations are used for real-time earthquake locations, especially in poorly instrumented areas such as the South Pacific, we show that the bias from anisotropy and sensor misorientation determined here can be corrected to improve the location accuracy, which yields fundamental data for rapid location necessary for effective tsunami warning.
ISSN: 2169-9313

hal-01389113
http://hal.univ-reunion.fr/hal-01389113
http://hal.univ-reunion.fr/hal-01389113/document
http://hal.univ-reunion.fr/hal-01389113/file/Fontaine_Ppol_JGR2009.pdf
DOI : 10.1029/2008JB005709

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Based on global earthquake catalogs, the hypocenters, nodal planes, and seismic moments of worldwide subduction plate interface earthquakes were extracted for the period between 1900 and 2007. Assuming that the seismogenic zone coincides with the distribution of 5.5 <= M < 7 earthquakes, the subduction interface seismogenic zones were mapped for 80% of the trench systems and characterized with geometrical and mechanical parameters. Using this database, correlations were isolated between significant parameters to identify cause-effect relationships. Empirical laws obtained in previous studies were revisited in light of this more complete, accurate, and uniform description of the subduction interface seismogenic zone. The seismogenic zone was usually found to end in a fore-arc mantle, rather than at a Moho depth. The subduction velocity was the first-order controlling parameter for variations in the physical characteristics of plate interfaces, determining both the geometry and mechanical behavior. As such, the fast subduction zones and cold slabs were associated with large and steep plate interfaces, which, in turn, had large seismic rates. The subduction velocity could not account for the potential earthquake magnitude diversity that was observed along the trenches. Events with M-w >= 8.5 preferentially occurred in the vicinity of slab edges, where the upper plate was continental and the back-arc strain was neutral. This observation was interpreted in terms of compressive normal stresses along the plate interface. Large lateral ruptures should be promoted in neutral subduction zones due to moderate compressive stresses along the plate interface that allow the rupture to propagate laterally.
ISSN: 1525-2027

hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681/document
https://hal.archives-ouvertes.fr/hal-00617681/file/heuretG32011.pdf
DOI : 10.1029/2010GC003230

Éditeur(s) : HAL CCSD
Résumé : International audience
An investigation of the eye and hand movement during the task of signature simulation was conducted. Three subjects' eye movements and hand movements were recorded using an eye-tracker and a digitizing tablet while they simulated signatures. The study revealed that eye gaze most frequently shifted within less than 17 msec of a pen velocity minimum. It is thought that the cognitive processes overseeing this movement control and the limitations of the visuomotor buffer could play an important role in the behaviour of simulating signatures and signature simulation quality.
17th Biennial Conference of the International Graphonomics Society
Pointe-à-Pitre, Guadeloupe

hal-01166493
https://hal.univ-antilles.fr/hal-01166493
https://hal.univ-antilles.fr/hal-01166493/document
https://hal.univ-antilles.fr/hal-01166493/file/IGS_2015_submission_35.pdf