Éditeur(s) : HAL CCSD SpringerOpen
Résumé : The Karakorum Fault zone (KFZ) plays an important role in understanding the formation, evolvement and deformation of the Tibetan Plateau. The high-T dextral shearing metamorphic rocks, e.g., mylonites or mylonitized gneisses-granites, locally crop out along the southeastern part of the KFZ in the Ayila Ri'gyü Range area. The SHRIMP U-Pb dating of the syn-kinematic crystallized zircons indicates that the initial age of the KFZ is ∼27 Ma, ∼10 Ma older than previous results. The extensive high-T dextral shearing along the KFZ started at least at 27–20 Ma, accompanied by the syn-kinematic emplacement of leuco-granites. Deformation and concomitant fluid circulation during shearing most likely occurred as early as at 25–13 Ma. The KFZ probably grew from southeast to northwest along the fault as a result of continuous convergence between the India plate and Eurasia plate.
ISSN: 1001-6538

hal-00406402
https://hal.archives-ouvertes.fr/hal-00406402
DOI : 10.1007/s11434-007-0164-6

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Synkinematic phyllosilicates in fault zones can be used to deduce the deformation mechanisms and the conditions of fault activity, as their chemical composition, crystal structure and texture can record the different stages of deformation and fluid-rock interactions. The Pic de Port Vieux, a second-order thrust related to the major Gavarnie thrust in the southern central part of the Pyrenees Axial Zone, juxtaposes Triassic pelites of the hanging wall and Cretaceous limestones of the footwall. In order to investigate the mineralogical and geochemical changes and constrain the deformation conditions of thrusting, characterization of phyllosilicates was performed along a transect in the fault hanging wall pelites. The Triassic pelites are mainly composed of quartz, calcite, phyllosilicates (chlorite and K-white mica) and ± hematite. The core fault zone thickness is estimated to be about one meter of intensively foliated green pelites, whereas the damage zone is composed of several meters of red pelites. XRD data demonstrated that the difference in color is related to hematite which is only present in the damage zone. Phyllosilicates of the damage zone are mainly inherited/diagenetic K-white mica and chlorite. In the core zone, newly formed chlorite is abundant and preferentially located in veins. It is enriched in Fe compared to the chlorite of the red pelites. The well-defined foliation in the core zone is overlaid by preferentially oriented muscovite grains which have homogeneous compositions, with less Na and relatively more Fe than mica from the red pelites. Newly formed chlorite and muscovite in the core zone are synkinematic to the fault activity. They are both related to deformation processes and fluid rock interactions. Kübler index measurements and chlorite thermometry show that synkinematic phyllosilicates have registered a temperature of 270°C ± 23°C for the damage zone and 285°C ± 28°C for the core zone which are corresponding to lower-anchizone/epizone grade conditions. Numerical modelling with the geochemical modelling program PhreeqC was performed to determine the favorable conditions for the mineralogical change between red and green pelites. It suggests that the main critical parameter favoring hematite dissolution and chlorite precipitation in the core zone, is the redox conditions. According to the model, the chemical changes in the core zone occurred due to interactions with highly reductive fluids. In addition, the hematite dissolution maybe the source of iron for newly formed phyllosilicates in the core zone that are more iron rich compared to those from the red pelites.
ISSN: 0169-1317

hal-01536006
https://hal.archives-ouvertes.fr/hal-01536006
DOI : 10.1016/j.clay.2017.05.008

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : In this work we combined apatite fission track and biotite/K-feldspar 40Ar/39Ar ages with tectonic data in the west central part of the Axial Zone of the Pyrenees. We discuss the exhumation ages and rates of the Néouvielle, Bordère-Louron, and Bielsa Variscan granites and their relationships with the timing and sequence of south vergent basement thrusting within the Pyrenean orogenic prism. The 40Ar/39Ar ages on K-feldspars from the Néouvielle massif (sample NV7) seem to indicate tectonic movements on the Eaux-Chaudes thrust during the early middle Eocene. Fission track results suggest that the exhumation of the Néouvielle massif occurred around 35 Ma and exhumation of the Bordère-Louron massif around 32 Ma in relation to thrusting on the Gavarnie thrust. The Bielsa massif was exhumed from around 19 Ma by out-of-sequence movements on the Bielsa thrust. We thus show that whereas most of the Pyrenean basement thrust faults (here the Eaux-Chaudes, Gavarnie, and Guarga thrusts) were active in sequence toward the southern foreland from the early Eocene to the earliest Miocene, some of them (here the Bielsa thrust) were activated out of sequence in the hinterland, later than the generally accepted Aquitanian age for the end of the Pyrenean compression. Finally, the apatite fission track modeling indicate a last cooling episode starting around 5 Ma which is most certainly related to the Pliocene reexcavation of the southern and northern flanks of the Pyrenees
ISSN: 0278-7407

hal-00406582
https://hal.archives-ouvertes.fr/hal-00406582
DOI : 10.1029/2006TC002080

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
We surveyed the junction between the central and southern Philippine Trench and the Sangihe Trench near 6øN using swath bathymetry, gravity, and magnetics. These data, along with seismicity, allow us to discuss the genetic relations between these trenches and the forces acting on converging plates. Our final model favors the northern extension of the Halmahera Arc up to 8øN, with three segments offset left-laterally along NW-SE transform faults. Accretion of the northern segment to Mindanao Island 4 to 5 m.y. ago resulted in the failure within the Philippine Sea Plate east of the arc. Initiation of the Philippine Trench between 7øN and 10øN agrees with the maximum recorded depth of the Philippine Trench floor (10,000 m below sea-level) and Philippine Sea slab (200 km). South of 6øN (trench junction), another segment of the arc is being subducted beneath the Sangihe margin, while south of 3øN, the southern segment of the Halmahera Arc is still active. The rapid southward shallowing of the trench floor along the southern Philippine Trench, the type of faulting affecting both sides of the trench, the lack of significant interplate seismicity, and the concentration of the seismicity beneath the Miangas-Talaud Ridge are interpreted as a slowing down of the subduction along this branch of the Philippine Trench compared with the rest of the subduction zone. The Sangihe deformation front has been recognized up to 7øN but seems active only south of 6øN.
ISSN: 2169-9275

hal-01261614
https://hal.archives-ouvertes.fr/hal-01261614
https://hal.archives-ouvertes.fr/hal-01261614/document
https://hal.archives-ouvertes.fr/hal-01261614/file/lallemandJGR1998.pdf

Éditeur(s) : HAL CCSD National Research Council Canada
Résumé : International audience
Back-arc extension in the Aegean, which was driven by slab rollback since 45 Ma, is described here for the first time in two stages. From Middle Eocene to Middle Miocene, deformation was localized leading to i) the exhumation of high-pressure metamorphic rocks to crustal depths, ii) the exhumation of high-temperature metamorphic rocks in core complexes and iii) the deposition of sedimentary basins. Since Middle Miocene, extension distributed over the whole Aegean domain controlled the deposition of onshore and offshore Neogene sedimentary basins. We reconstructed this two-stage evolution in 3D and four steps at Aegean scale by using available ages of metamorphic and sedimentary processes, geometry and kinematics of ductile deformation, paleomagnetic data and available tomographic models. The restoration model shows that the rate of trench retreat was around 0.6 cm/y during the first 30 My and then accelerated up to 3.2 cm/y during the last 15 My. The sharp transition observed in the mode of extension, localized versus distributed, in Middle Miocene correlates with the acceleration of trench retreat and is likely a consequence of the Hellenic slab tearing documented by mantle tomography. The development of large dextral NE-SW strike-slip faults, since Middle Miocene, is illustrated by the 450 Km-long fault zone, offshore from Myrthes to Ikaria and onshore from Izmir to Balikeshir, in western Anatolia. Therefore, the interaction between the Hellenic trench retreat and the westward displacement of Anatolia started in Middle Miocene, almost 10 Ma before the propagation of the North Anatolian Fault in the North Aegean.
ISSN: 0008-4077

insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296/document
https://hal-insu.archives-ouvertes.fr/insu-01271296/file/Brun%20etal%20CJES%202016.pdf
DOI : 10.1139/cjes-2015-0203

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The brittle structures of a Hercynian granite (La Borne, French Massif Central) observed at several scales, from regional to microscopic, are presented and interpreted on mechanical terms. Emphasis is placed on strike slip faults, joints, and cracks related to incipient shear fracturing during horizontal compression. Three compressive tectonic phases have been identified according to their brittle structures and characterised by the burial depth at the time of their generation.The two first phases (H1, H2) are Hercynian and occurred while the granite was deeply buried (∼5 to 3 km depth) whereas the last phase (P) is Pyrenean and occurred at very low depth. The geometric organizations of cracks, joints and faults are clearly similar at various scales from about 10 μm to several m.These field observations are strong arguments for the occurrence of shear structures at microscopic to macroscopic scales during tectonic events. Following this inference, it is proposed that, at least in the case of Hercynian phases, cracks, joints and macroscopic strike slip faults have been generated by the same mechanical process under high overburden weight. Therefore, incipient fractures seem to be generated as shearing structures and to evolve by coalescence with neighbouring ones with the same direction.
ISSN: 0191-8141

hal-01115718
https://hal.archives-ouvertes.fr/hal-01115718
DOI : 10.1016/j.jsg.2014.05.002

Éditeur(s) : HAL CCSD
Résumé : In Taiwan , the subduction of the Chinese continental margin under the Luzon arc results in the progressive growth of an active orogenic wedge. It is one of the best places to study the complex relationships that occurs between the tectonic processes controlling deformation (plate rheology and kinematics, metamorphism and magmatism) and surface processes (erosion and sedimentation). In order to study the kinematics of the present day convergence of Philippine Sea plate to the Asian continent around Taiwan, we perform 2D and 3D sandbox modeling and we analyzed the models with PIV (Particle Image Velocimetry) software. In 2D experiments, a model Coulomb wedge is submitted to erosion and sedimentation under topography and flux steady state conditions. The 3D experiments are mainly used to study the escape tectonics occurring in the middle west and southwest Taiwan. A wedge shaped indenter and a basement relief were used to simulate the mechanical plate boundary between Philippine Sea plate and Eurasia plate and the basement topography to the west of Taiwan respectively. We examine the exhumation patterns, the mode of fault propagation and displacement patterns by strain partitioning of vertical vs. horizontal displacement and convergent parallel vs. orogen parallel components. The preliminary conclusions are: 1. The interactions between tectonics, erosion and sedimentation control geometry and kinematics of the doubly vergent transpressional orogen. 2. Exhumation processes are controlled by the balance between erosion, frontal accretion and underplating in different structural domains of the wedge. 3. Retrowedge erosion favorites backfolding and backthrusting, induces flower structures and fan shaped cleavage distribution. 4. Sedimentation promotes underplating and out-of sequences thrusting. 5. Continental subduction or subduction of topographic highs will enhance underthrusting/underplating, thick-skin tectonics and inversion of sedimentary basin.
Bolletino di Geofisica teorica ed applicata

hal-00411133
https://hal.archives-ouvertes.fr/hal-00411133

Résumé : L’arc des Petites Antilles résulte de la lente subduction vers l'Ouest des plaques Nord et Sud-Américaines sous la plaque Caraïbes (2cm/an). A la latitude de l’archipel guadeloupéen et à ~150 km à l’Ouest du front de déformation, le bassin d'avant-arc de Marie-Galante forme un bassin perché, incliné vers la fosse et limité vers l’Est par un haut-fond, l’Eperon Karukéra. À cette latitude, le bassin de Marie-Galante domine le prisme d’accrétion de la Barbade et fait face à la ride de Tiburon qui balaye la zone du Nord au Sud depuis la fin du Miocène supérieur. Le remplissage sédimentaire du Bassin de Marie-Galante montre des déformations actives au moins depuis ~30 millions d’années. L’objectif du travail est de reconstituer l’évolution tectono-sédimentaire de ce bassin pour apporter de nouvelles contraintes sur la compréhension globale de la zone de subduction frontale des Petites Antilles. Ce travail s'appuie sur les données de bathymétrie multifaisceaux et de sismique réflexion multi-traces haute résolution acquises lors des campagnes du programme KaShallow. Cette base de données, complétée de profils sismiques plus basse résolution de campagnes antérieures, permet d’avoir une couverture pseudo 3D et à quatre échelles de résolution de l'ensemble du bassin. Un échantillonnage par ROV et carottage ciblé a fourni 40 prélèvements dans les principales unités sismiques. Les analyses pétrologiques et les datations biostratigraphiques autorisent des reconstitutions paléo-environnementales depuis le Paléogène supérieur jusqu’à Actuel. L’interprétation sismique multi-échelle montre un bassin sédimentaire atteignant ~4,5s temps double (~4500 à 5625 m) sur un substratum magmatique pré-structuré. Ce bassin est composé de 5 grands ensembles sédimentaires (E-1, E1, E2, E3 et E4) subdivisés en 13 unités limitées par 14 surfaces de discontinuités. L’organisation séquentielle des unités sismiques permet de mettre en évidence 10 séquences de dépôts de troisièmes ordres (S-1 à S9). Le calage biostratigraphique de l’ensemble des séquences permet de proposer une évolution tectono-sédimentaire du bassin de l’Éocène à l’Actuel. Ainsi, nous distinguons quatre systèmes de failles normales associées à trois phases d’extensions qui contrôlent l’évolution architecturale et sédimentaire du bassin. 1/ Un système N050±10°E hérité, actif dès le Paléogène supérieur, qui contrôle le basculement général du bassin vers le SSE. Il est responsable de la formation de l'escarpement de Désirade d’environ 4500 m de dénivelé. Cette première extension est interprétée comme résultant de la fragmentation de l'avant-arc en réponse à l'augmentation du rayon de courbure de la zone de subduction. 2/ Un système N130°-N150°E, structurant à l’échelle de l’Éperon Karukéra, qui contrôle la sédimentation dès le Miocène inférieur et marque une première phase d'extension transverse à l’arc. 3/ Un système N160°-N180°E qui segmente le Bassin de Marie-Galante en un sous-bassin à l'Ouest et l'Éperon Karukéra à l'Est. Cette seconde extension, globalement perpendiculaire à la marge, s'accompagne d’une subsidence et d'une inversion de la polarité du bassin en réponse à son basculement vers la fosse qui débute au cours du Miocène moyen et se poursuit actuellement à l'Est du bassin. Cette évolution à long terme de l'avant-arc, concomitante avec le recul de l'arc volcanique vers l’Ouest, est considérée comme résultant d’une érosion basale de la plaque supérieure. 4/ Un système N090±10°E plus tardif est localisé au centre du bassin et qui contrôle le développement de plates-formes carbonatées néritiques sur certaines têtes de blocs, comme par exemple à Marie-Galante. Cette dernière extension, parallèle à l’arc, se manifeste dans le bassin à partir du Pliocène inférieur. Elle se superpose au régime d'extension perpendiculaire à l'avant-arc et est interprétée comme l'accommodation du partitionnement de la déformation en réponse à l’obliquité croissante du front subduction vers le Nord.
The Lesser Antilles result of the slow westward subduction of the North and South American plate under the Caribbean plate (2 cm / year). At the latitude of the Guadeloupe archipelago and ~ 150 km to the west of the deformation front, the fore-arc basin of Marie-Galante forms a perched basin tilted to the pit and limited to the East by a shoal, the Spur Karukéra. At this latitude, Marie-Galante basin dominates the accretionary prism of Barbados and faces wrinkle Tiburon sweeping the area from North to South from the late Miocene. The sedimentary fill Basin Marie-Galante shows active deformation since at least ~ 30 million years. The aim of the work is to reconstruct the tectono-sedimentary evolution of the basin to provide new constraints on the overall understanding of the frontal subduction zone Lesser Antilles. This work relies on multibeam bathymetry data and high-resolution seismic reflection multi-traces acquired during campaigns KaShallow program. This database, supplemented by lower resolution of previous campaigns seismic profiles, provides a pseudo-3D coverage and four scales of resolution of the entire basin. ROV sampling and targeted core provided 40 samples in the main seismic units. Petrological analysis and biostratigraphic dating allow paleoenvironmental reconstructions from the upper Paleogene up Actuel. Seismic interpretation multiscale shows a sedimentary basin reaching ~ 4,5s double (~ 4500-5625 m) on a substrate pre-structured magma. This basin consists of 5 main sedimentary units (E-1, E1, E2, E3 and E4) divided into 13 units bounded by discontinuities 14 surfaces. The sequential organization of seismic units allows to highlight sequences 10 deposits of third order (S-1 to S9). The biostratigraphic calibration of all sequences able to offer a tectono-sedimentary evolution of the Eocene basin to Present. Thus, we distinguish four normal fault systems associated with three phases of extensions that control the architectural and sedimentary evolution of the basin. 1 / A system N050 ± 10 ° E inherited assets from the upper Paleogene, which controls the overall pelvic tilt towards the SSE. He is responsible for the formation of the escarpment Désirade about 4500 m elevation. The first extension is interpreted as resulting from the fragmentation of the fore-arc in response to the increase in the radius of curvature of subduction. 2 / A system N130 ° -N150 ° E, structuring across the Spur Karukéra, which controls sediment from the Miocene and marks the first phase of transverse extension arc. 3 / A system N160 ° E ° -N180 which segments Basin Marie-Galante in a sub-basin to the west and the Spur Karukéra in the East. This second extension, generally perpendicular to the margin, is accompanied by subsidence and reversing the polarity of the basin in response to his switch to the pit, beginning during the Middle Miocene and is ongoing in the East the basin. This long-term evolution of the forearc, concurrent with the decline in volcanic arc to the west, is considered as resulting from a basal erosion of the top plate. 4 / A system N090 ± 10 ° later E is located in the center of the basin and controlling the development of neritic carbonate platforms on certain blocks heads, such as Marie-Galante. This latest extension, parallel to the arc occurs in the basin from the lower Pliocene. It is superimposed on the expansion plan perpendicular to the fore-arc and is interpreted as the accommodation of the partitioning of deformation in response to the increasing obliquity front subduction north.

http://www.theses.fr/2014AGUY0799/document

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Iberian Massif is the best exposed segment of the European Variscan Belt. It includes relatively well preserved terranes that were accreted by transpression along time and resulted in a number of geotectonic units that formed part of the Late Paleozoic assembly of the Pangaea Supercontinent. In SW Iberia, these units are the Central Iberian Zone (CIZ), Ossa Morena Zone (OMZ), and the South Portuguese Zone (SPZ). A 210 km long NE-SW magnetotelluric profile was carried out through the CIZ, from the OMZ-CIZ boundary toward the north, reaching the Tagus (Cenozoic) basin. Data dimensionality analysis resulted in a suitable 2-D electrical resistivity structure, allowing a 2-D inversion of the data set. Complementary available geophysical data (deep seismic, gravity and aeromagnetic) and a comparison with a detailed geological cross section led us to constrain the interpretation of the 2-D electrical resistivity structure of the CIZ crust. The results show, for the upper crust, the existence of diverse conductive/resistive bodies that correlate well with known geological features (sedimentary basins, faults, granitic plutons, mineralized systems). A mild but steady conductive band is located along the middle and lower crust that is interpreted as a mafic granulite basement. The upper section of this band connects with several elongated shallow conductors, providing further evidence for the existence, in the Central Iberian Zone, of a complex decollement system where the major faults are rooted. Such a crustal architecture is viewed as the northward continuation of the Variscan large-scale structures previously recognized in the southern sectors (OMZ and SPZ).
ISSN: 0148-0227

hal-00671036
https://hal.archives-ouvertes.fr/hal-00671036
DOI : 10.1029/2010JB007538

Éditeur(s) : HAL CCSD
Résumé : International audience
In many geological reservoirs, open fractures or fault zones generally induce high spatial variability of hydrodynamical properties and shape the main deep-seated flow paths. It is of crucial interest to determine their structure and properties in order to achieve a sound and sustained exploitation of resources or to estimate the risk of failure of any underground storage. Tiltmeters have emerged as new tools to observe deformation generated by groundwater flow. As such instruments are highly sensitive to pressure gradients, they are perfectly suited for monitoring channelized flow in connected fractures and fault zones. Hence, they provide a unique insight of these reservoirs' geometry and dynamics over broad time scales. Here we demonstrate that continuous tilt data from surface long baseline tiltmeters (LBT) can be used alone to evaluate the general functioning of a fractured hardrock system and estimate the hydraulic properties of its main conductive features. The study is applied to the pumping site of Ploemeur observatory (Brittany, France) which is well documented and instrumented, and therefore forms a convenient setting for introducing LBT as tools for fractured media hydrology. On the short term, tilt signals are strongly correlated with pumping cycles and associated head level changes in well-connected boreholes. Besides, when pumps are stopped the maximal tilt direction is systematically perpendicular to a subvertical fault zone whose azimuth of strike has thereby been refined down to degree precision. By using a semi-analytical model of deformation, we establish the link between tilt and pressure change during pumping interruptions which then allows for hydraulic properties estimation from tilt measurements only. Finally, we validate our results with previous estimates obtained from other studies and discuss the orientation of future work that could enhance these estimates.
AGU Fall Meeting 2014
San Francisco, United States

insu-01093437
https://hal-insu.archives-ouvertes.fr/insu-01093437

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Paleostress orientations were calculated from fault populations at 24 sites along the SW-NE segment and five sites along the E-W. Yasin segment of the Karakoram-Kohistan Suture Zone in NW Pakistan They demonstrate the importance of combined thrusting and strike-slip faulting. However, several paleostress tensor directions are distinguished, a dominant NW-SE compression and a minor E-W compression are compatible with the recent evolution of this part of the Hindu Kush. From the lack of both systematic overprinting-relationships and spatial trend (the two tensors were obtained at different locations) we conclude that in each location any of these two shortening directions can dominate Heterogeneously distributed extension is found in some places and is likely due to local conditions These paleostress tensors substantiate a transpressional regime due to far-field Himalayan compression and document the long-term background of the seismogenic deformation in this region.
ISSN: 0743-9547

hal-00496459
https://hal.archives-ouvertes.fr/hal-00496459
DOI : 10.1016/j.jseaes.2010.01.004

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary natural observatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studies have improved our view about fault geometry and mechanics within CRL but there is still a critical need for a better knowledge of the structure at depth.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by using recently developed methodologies of structural imaging in order to determine, with high resolution, the local 3D structure and the earthquake locations. We perform an iterative joint determination of 3D velocity model and earthquake coordinates. P and S velocity models are estimated through a first arrival traveltime tomography by using the adjoint state method proposed by Taillandier et al. (2009). It consists in the minimization of the cost function between observed and theoretical arrival times,which is achieved by estimating the gradient of the cost function. Earthquake locations are also estimated with a linearized inversion approach by computing the gradient of the misfit function. Iterations are repeated until the cost function no longer decreases. We present preliminary results consisting in: (1) the adjustment of a 1D velocity model that is used as initial model of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquake locations.We also perform a preliminary receiver function analysis of teleseismic data recorded by the broadband stations of the CRL network. The multiscale approach (Gesret et. al., 2010) analysis of teleseismic P to S converted waves allows to analyze the signal toward the higher frequencies and thus to characterize the structure at depth with a high resolution. Our multiscale approach should give us reliable depth of interfaces beneath seismometers in the CRL area. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar as possible to the stack of observed RF for a subset of data. The identified interfaces could then be compared with heterogeneities imaged by the tomography.
AGU Fall Meeting
San Fransico, United States

hal-01417184
https://hal-mines-paristech.archives-ouvertes.fr/hal-01417184

Éditeur(s) : HAL CCSD Elsevier
Résumé : The seismic characteristics of focused fluid-related features such as pockmarks and carbonate build-ups on the Nigerian continental slope have been investigated using complementary seismic data sets (reprocessed 3D exploration data and 2D Very High Resolution hull-mounted and near-bottom seismic data) coupled with the results of previous studies (sedimentological, geotechnical and geochemical analyses).The results show different types of fluid-related features within the hemipelagic phase of long duration (∼1 Myr) Turbidite/Hemipelagic cycles. They are the product of the disturbance of the hosting sediments following two main distinct processes: (1) no or low sediment deposition caused by fluid escape associated with seafloor settlement (benthic fauna, carbonate precipitation, gas hydrate formation) and (2) post-depositional erosion, caused either by fluid release (dewatering from underlying features such as channels and upward migration from a deep source) or by collapse (destabilisation of gas hydrates). The temporal evolution reveals a decrease in fluid flow during the hemipelagic deposition as witnessed by the decrease in methanogenic activity and by gas hydrate destabilisation. The spatial distribution of fluid-related features seems to be controlled by the type of fault (small fault or structural lineament).
ISSN: 0264-8172

hal-01685513
https://hal.archives-ouvertes.fr/hal-01685513
DOI : 10.1016/j.marpetgeo.2017.10.004

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We performed forward modelling of seismic anisotropy beneath a migrating strike-slip plate boundary to: (1) test if such a geodynamic context might explain teleseismic shear wave splitting data in the vicinity of the central part of the San Andreas Fault and (2) constrain the power of such data to unravel vertical and lateral variations in deformation patterns in the upper mantle. The modelling involves five steps: (1) thermomechanical modelling, using a finite-element code, of the deformation field, (2) viscoplastic self-consistent modelling of the resulting olivine and pyroxene crystal preferred orientations, (3) calculation of the elasticity tensors for different domains of the finite elements (FEs) model, (4) forward modelling of seismic wave propagation through the model using ray theory, finite-frequency theory and a full-wave approach and (5) performing splitting measurements on the synthetic seismograms. SKS splitting data in central California are best fitted by a model with a hotter geotherm within 60 km of the plate boundary accounting for the opening of an asthenospheric window due to the northward migration of the Mendocino Triple Junction. The westward motion of the plate boundary cannot however explain the rotation of fast polarization directions east of the San Andreas Fault in central California. Comparison between modelled and measured individual shear wave splitting also implies that the homogeneity of the two-layer models accounting for the observations in the vicinity of the San Andreas Fault indicates a sharp transition between lithospheric and asthenospheric deformations beneath this plate boundary. The ability of different synthetic approaches to localize horizontally and vertically the plate boundary-related deformation differs significantly. Splitting in ray theory synthetics closely follow variations in olivine crystallographic preferred orientations in the model. In contrast, splitting analysis on full-wave synthetics, which should be more representative of actual long-period SKS waves, results in smooth apparent lateral variations of anisotropy; the exact location and width of the plate boundary may only be retrieved by comparing fast-polarization profiles obtained using a multichannel analysis on waves with different periods.
ISSN: 0956-540X

hal-01236150
http://hal.univ-reunion.fr/hal-01236150
http://hal.univ-reunion.fr/hal-01236150/document
http://hal.univ-reunion.fr/hal-01236150/file/Bonnin_San_Andreas_modelling_GJI2012.pdf
DOI : 10.1111/j.1365-246X.2012.05650.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The detailed morphology and internal structure of the Calabrian accretionary wedge and adjacent Eastern Sicily margin are imaged in unprecedented detail by a combined dataset of multi-beam bathymetry and high-resolution seismic profiles. The bathymetric data represent the results of 6 recent marine geophysical surveys since 2010 as well as a compilation of earlier surveys presented as a 2 arc-sec (60 m) grid. Several distinct morpho-tectonic provinces are identified including: the deeply incised Malta–Hyblean Escarpment, numerous submarine canyons, broad regions of relatively flat seafloor dominated by fields of sediment waves, the gently undulating anticlinal fold-and-thrust belts of the external Calabrian accretionary wedge and the adjacent portion of the Western Mediterranean Ridge. The Calabrian arc can be divided into 4 domains (from SE to NW): 1) the undeformed Ionian abyssal plain, 2) the external evaporitic wedge, 3) the internal clastic wedge, 4) the Calabrian backstop (Variscan crystalline basement). The Calabrian accretionary wedge can also be divided laterally into two major lobes, the NE- and the SW lobes, and two minor lobes. The kinematics of the limit between the two major lobes is investigated and shown to be sinistral in the external (evaporitic) wedge. A network of radial slip lines within the southernmost external wedge unequivocally demonstrate ongoing dextral displacement of a rigid indenter (representing the corner of the clastic wedge) into the evaporitic wedge thereby confirming the geodynamic model of an active lateral slab tear fault here off eastern Sicily. The slab tear produces a series of major sub-parallel dextral strike-slip faults offshore Mt. Etna and south of the Straits of Messina consistent with the relative motions between Calabria and the Peloritan domain (NE Sicily). Abundant strike-slip faulting, and wide-spread folding and thrusting observed throughout the entire accretionary wedge, indicate regional shortening between the Ionian abyssal plain (foreland) and the Calabrian–Peloritan backstop caused by active subduction.
ISSN: 0012-821X

hal-01523990
https://hal.archives-ouvertes.fr/hal-01523990
DOI : 10.1016/j.epsl.2016.12.020

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
This paper aims to decipher the thermal evolution of the Montagne Noire Axial Zone (MNAZ,southern French Massif Central) gneiss core and its metasedimentary cover through determination ofP–T paths and temperature gradients. Migmatitic gneiss from the core of the dome record a clock-wise evolution culminating at 725 25 °C and 0.8 0.1 GPa with partial melting, followed by adecompression path with only minor cooling to 690 25° C and 0.4 0.1 GPa. Field structuralanalyses as well as detailed petrological observations interpreted in a petrogenetic grid indicate thatthe cover sequence experienced LP-HT metamorphism at <0.4 GPa. Apparent thermal gradientswithin the cover were determined with garnet–biotite thermometry and Raman Spectroscopy on Car-bonaceous Matter. High-temperature apparent gradients (e.g. 530 °C km1 along one transect) areexplained by late brittle–ductile extensional shearing evidenced by phyllonites that post-date peakmetamorphism. In areas where normal faults are less abundant and closely spaced, gradients of 20to 50 °C km1 are calculated. These gradients can be accounted for by a combination of domeemplacement and ductile shearing (collapse of isotherms), without additional heat input. Finally, thethermal evolution of the MNAZ is typical for many gneiss domes worldwide as well as with otherLP-HT terranes in the Variscides.
ISSN: 0263-4929

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388/document
https://hal-insu.archives-ouvertes.fr/insu-01290388/file/jmg12188.pdf
DOI : 10.1111/jmg.12188

Éditeur(s) : Institut de Ciències del Mar de Barcelona, CSIC
Résumé : Acoustic and core data have recently been collected on the shelf break and the upper part of the slope of the south Aquitaine continental margin. They reveal the major role played by mass-flow gravity processes in deposit erosion and redistribution, modelling of the sea-bed, and transfer of sediment toward the deep-sea. The study region is bounded in the south by the Capbreton canyon. The northern area, which shows a smooth morphology, is characterised by small-scale deformations due to sediment creep or low-amplitude slide processes. The deformations are associated with mini listric-like faults that bound packets of sediments in which the deposit geometry is typical of constructional sediment waves. These sediment waves result from the interaction of depositional and gravity deformation processes. In the southern area, closer to the canyon, wave-like structures are still present but mostly of smaller size. They only result from gravity deformation processes without any evidence of constructional processes. In the vicinity of the Capbreton canyon, the shelf break and upper slope have a much more uneven morphology with sedimentary reliefs, escarpments and depressions directed toward the canyon thalweg. The depressions look like slide scars, and could be the result of regressive slides initiated at the top of the canyon flank. The age of the sliding event responsible for the formation of the depression observed today could be middle to upper Quaternary. Since their formation, these depressions act as conduits that channel the transfer of shelf sediment into the canyon, as demonstrated by the occurrence of a meandering channel on the sea-floor of one depression.
Scientia Marina (0214-8358) (Institut de Ciències del Mar de Barcelona, CSIC), 2006-06 , Vol. 70 , N. 1 , P. 89-100

Droits : 2006 Institut de Ciències del Mar de Barcelona
http://archimer.ifremer.fr/doc/2006/publication-3960.pdf
http://archimer.ifremer.fr/doc/00000/3960/

Éditeur(s) : HAL CCSD
Résumé : The Tyrrhenian Sea is usually interpreted to be a Neogene back-arc basin that opened by continental rifting and oceanic spreading caused by the eastward migration of the Apennine subduction system from Tortonian to Pliocene times. Rifting of the Tyrrhenian Sea started first along the Eastern Sardinian margin during the Tortonian-Messinian times. The " METYSS " project aims at better constraining the relations between crustal tectonics, salt tectonics and sedimentation from Messinian times to present-day. The " METYSS 1 " cruise (2009, R/V "Téthys II"-INSU) allowed us to obtain about 1200 km of high-resolution seismic reflection profiles along the SE Corsican margin, and along the upper and middle parts of the Eastern Sardinian margin, Western Tyrrhenian. This new dataset clearly illustrates that this area has been highly dissected during the rifting stage by N-S trending normal faults delineating ridges and basins, as previously described. The Messinian seismic markers (UU and MU) locally display fan-shaped stratal geometries, but the mechanism responsible for such geometries, i.e., salt tectonics or rifting, has yet to be carefully deciphered. We also mapped the spatial distribution of the mobile salt (MU). The highly variable thickness of the confined salt basins may be related to the initial pre-Messinian basin geometry or to the fact that sediment deposition was syn-rift. Southeastward, salt tectonics appears highly vigorous. More surprisingly, our data demonstrate that some of the major faults have been significantly reactivated during the post-rift period, up to late Quaternary time. Such recent fault activity has been recorded by bathymetric scarps and associated footwall debris flows. Moreover, some of this post-rift deformation can be evidenced within the Plio-Quaternary sequence by a regional unconformity. The post-Miocene deformation style varies greatly between different areas of the margin, and can also be strongly influenced by the presence or absence of mobile Messinian evaporites (MU).
13ème Congrès Français de Sédimentologie
Dijon, France

hal-00657310
https://hal-brgm.archives-ouvertes.fr/hal-00657310

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tapajós Domain in the Amazonian Craton comprises hundreds of gold occurrences mainly hosted by Paleoproterozoic granitic rocks, whose geotectonic evolution and deformation style are poorly understood. The Tocantinzinho granite hosts a large amount of gold, forming the largest gold deposit known in the Tapajós Domain. The Tocantinzinho area is formed by plutonic rocks cut by subvolcanic rocks shallowly emplaced and constrained by NW-SE strike-slip faults, probably in a transtensive site. The magmatism started with the emplacement of huge granodiorite that presently formed the basement country rocks (2007–1997Ma), it was followed by the Tocantinzinho granite magmatism (1989–1979 Ma), and the coeval to late andesite emplacement. Petrological and textural evidence suggest the complex and synchronous occurrence of tectonics and few magmatic events expressed by the emplacement of successive granite, aplite, pegmatite, andesite, and dacite. The magmatic event finished with the cooling of this set of rocks below c. 320 °C, at c. 1950 Ma. The cooling rates vary from c. 3.6–14.7°C/Ma, with an average of 7.5°C/Ma, indicating no important vertical exhumations. The elongated geometry of the Tocantinzinho granite and related rocks, features of solid-state deformation within granites and syntectonic deformation of some andesite dikes imply the existence of wrench type tectonic control. The I-type signature of these rocks, their high-K calc-alkaline and metaluminous to peraluminous affinities combined with the tectonic style indicate a post-collisional tectonic setting. Based on geochemical and structural constrains, the rocks from the Tocantinzinho area are interpreted as a part of the Creporizão Suite and probably represent the first expressions of this syn-to late-tectonic magmatism in the region. A continuous and progressive process of magmatic emplacement controlled by tectonics will be proposed and discussed in conclusion.
ISSN: 0895-9811

hal-01526936
https://hal.archives-ouvertes.fr/hal-01526936
DOI : 10.1016/j.jsames.2017.02.003

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The basis of this study is a new bathymetric map of the northeast Atlantic compiled from previously published maps made from conventional echosounder data, plus all Sea Beam data acquired on board the R/V JEAN CHARCOT since 1977. As most of the Sea Beam data have been obtained on the continental margin from Porcupine Seabight to the south of the Iberian Peninsula, a precise picture of the continental slope is given. A statistical analysis of the canyons, based on 750 measurements, reveals that many of the canyons present sharp changes in their direction, indicating a structural control mainly linked to the late Hercynian trends, especially around the Iberian Peninsula. Nevertheless, the paths of canyons may merely reflect recent gravity processes, as in the Porcupine Seabight. Canyons locally follow the directions of listric and associated transecting faults (Permian to Triassic and upper Jurassic to lower Cretaceous), as on the Celtic
ISSN: 0278-7407

hal-01261558
https://hal.archives-ouvertes.fr/hal-01261558
https://hal.archives-ouvertes.fr/hal-01261558/document
https://hal.archives-ouvertes.fr/hal-01261558/file/Lallemand1986-Tectonics.pdf
DOI : 10.1029/TC005i007p01125