Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Improving the prediction of sub-seismic structures and their petrophysical properties is essential for realistic characterization of deformed sandstone reservoirs. In the present paper, we describe permeability contrasts induced by cataclastic deformation bands and faults in porous sandstones (766 data synthesized from field examples and the literature). We also discuss the influence of several factors, including tectonic regime, presence of a fault, burial depth, host sandstone porosity, and grain size and sorting for their initiation and permeability. This analysis confirms that permeability decrease is as a function of grain-crushing intensity in bands. Permeability reduction ranges from very limited in crush-microbreccia of compaction bands to high permeability reduction in cataclasites and ultracataclasites of shear-dominated bands, band clusters and faults. Tectonic regime, and especially normal-fault regime, with its tendency to localize strain and generate faults, is identified as the most important factor, leading to the formation of cataclastic bands with high permeability contrasts. Moreover, moderate burial depth (1–3 km) favors cataclastic bands with high permeability contrasts with respect to the host sandstone. High porosity, coarse-grain size and good grain sorting can slightly amplify the permeability reductions recorded in bands.
ISSN: 0191-8141

hal-01218408
https://hal.archives-ouvertes.fr/hal-01218408
DOI : 10.1016/j.jsg.2015.03.013

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Continental rifts and passive continental margins show fundamental along-axis segmentation patterns that have been attributed to one or a number of different processes: extensional fault geometry, variable stretching along strike, preexisting lithospheric compositional and structural heterogeneities, oblique rifting, and the presence or absence of eruptive volcanic centers. The length and width scales of the rift stage fault-bounded basin systems change during the late evolution of the new plate boundary, and the role of magmatism may increase as rifting progresses to continental rupture. Along obliquely spreading ridges, first-order mid-ocean ridge geometries originate during the synrift stage, indicating an intimate relationship between magma production and transform fault spacing and location. The Gulf of Aden rift is a young ocean basin in which the earliest synrift to breakup structures are well exposed onshore and covered by thin sediment layers offshore. This obliquely spreading rift is considered magma-poor and has several large-offset transforms that originated during late stage rifting and control the first-order axial segmentation of the spreading ridge. Widely spaced geophysical transects of passive margins that produce only isolated 2-D images of crust and uppermost mantle structure are inadequate for evaluation of competing rift evolution models. Using closely spaced new geophysical and geological observations from the Gulf of Aden we show that rift sectors between transforms have a large internal variability over short distances (∼10 km): the ocean-continent transition (OCT) evolves from a narrow magmatic transition to wider zones where continental mantle is probably exhumed. We suggest that this small-scale variability may be explained (1) by the distribution of volcanism and (2) by the along-strike differences in time-averaged extension rate of the oblique rift system. The volcanism may be associated with (1) the long-offset Alula-Fartak Fracture Zone, which may enhance magma production on its younger side, or (2) channeled flow from the Afar plume material along the newly formed OCT and the spreading ridge. Oblique extension and/or hot spot interactions may thereby have a significant control on the styles of rifting and continental breakup and on the evolution of many magma-poor margins.
ISSN: 1525-2027

hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866/document
https://hal.archives-ouvertes.fr/hal-00504866/file/G3-Leroy_al-2010.pdf
DOI : 10.1029/2009GC002963

Éditeur(s) : HAL CCSD
Résumé : International audience
The Achmmach tin mineralization (NE of theMoroccan Central Massif) is associated with tourmaline-richalteration halos, veins, and faults hosted in sandstones andmetapelites of the Upper Visean-Namurian. These depositsare reported to be late Hercynian in age and related to theemplacement of late-orogenic granite not outcropping in thestudied area. Structural and paragenetic studies of theAchmmach tin deposit were conducted in order to establisha general model of the mineralization. From field constraints,the late Hercynian phase is marked by a transition fromtranspression to extension with deformation conditions evolvingfrom ductile to brittle environments. The transpression(horizontal shortening direction roughly trending E-W) is coevalwith the emplacement of the first tourmaline halos alongseveral conjugated trends (N070, N020, and N120).Thereafter, a tourmaline-rich breccia formed in response tothe fracturing of early tourmaline-altered rocks.Subsequently, during the extensional phase, these structureswere reactivated as normal faults and breccias, allowing theformation of the main tin mineralization (cassiterite) associatedwith a wide variety of sulfides (arsenopyrite, chalcopyrite,sphalerite, galena, pyrrhotite, bismuthinite, pyrite, and stannite). This evolution ends with fluorite and carbonate deposition.The hydrothermal fluid flow velocity, calculated byapplying statistical measures on the tourmaline growth bands,varies with the lithology. Values are lower in metapelites andhigher in breccia. In the general evolution model proposedhere, tourmaline alteration makes the rock more competent,allowing for brittle fracturing and generation of open spacewhere the main Sn mineralization was precipitated.
Mineralium Deposita

insu-01240481
https://hal-insu.archives-ouvertes.fr/insu-01240481
DOI : 10.1007/s00126-015-0613-0

Éditeur(s) : Elsevier Science Bv
Résumé : Volcaniclastic successions are well-described in volcanic arc setting but rare in hotspot environments. The present work proposes a facies model of volcaniclastic sedimentation related to basaltic hotspot volcanoes as exemplified by the Piton de la Fournaise volcano (La Réunion Island). The facies model is based on a multi-scale approach combining high-resolution multibeam and backscatter data, deep-water photographs, side scan imagery and Kullenberg piston cores. Data show that a wide range of gravity flows and erosional features develop in the active volcaniclastic sedimentary system. Coastal and submarine instabilities are the main processes shaping the volcano's submarine morphology. Meanwhile, the evolution and dynamics of the sedimentary system are strongly linked with the morpho-structural evolution of the subaerial part of the volcano. The proposed model is characterized by a cyclic succession of stages: (1) a growing stage during which sedimentary activity is mainly restricted to proximal and mid-slope areas; (2) a collapse stage that entirely reshapes the morphology of the submarine slopes; and (3) an erosional stage related to a slow down of volcanic activity, enabling the development of large deep-sea fans.
Marine Geology (0025-3227) (Elsevier Science Bv), 2013-03 , Vol. 337 , P. 35-52

Droits : 2013 Published by Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00137/24798/22939.pdf
DOI:10.1016/j.margeo.2013.01.004
http://archimer.ifremer.fr/doc/00137/24798/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The western margin of the Gulf of Mexico (Veracruz State, Mexico) displays an extensive Neogene gravitational system, whereby the Neogene siliciclastic sediments are detached from underlying Mesozoic carbonates along decollement surface in Oligocene underpressured clays. Rapidly subsiding half-grabens develop above the footwall associated with major listric faults, whereas mini-basins develop in the deepest parts of the slope, in conjunction with the growth of west-verging compressional features. Between the high-angle normal faults in the west and the thrust anticlines in the east, a wide roll-over structure has grown progressively, resulting in a major topographic break in the morphology of the slope profile. Coupled forward kinematic modelling (Thrustpack) and stratigraphic modelling (Dionisos), calibrated against seismic profiles and two key nearshore wells, have been applied to representative regional transects across the margin, in order to quantify the vertical (subsidence) and horizontal (gravitational) deformations, and to discuss the impact of various key parameters on the distribution of debris flow depositions. These simulations are compared with data from distant ODP wells and discussed in the scope of current exploration strategies in both the US and Mexican portions of the Gulf of Mexico basin.
ISSN: 0040-1951

hal-00424595
https://hal.archives-ouvertes.fr/hal-00424595
DOI : 10.1016/j.tecto.2008.06.017

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
The brittle to ductile transition may strongly influence hydraulic properties of rocks at the depth and temperature ranges that hydrothermal fluids circulate. To examine this transition in the context of the oceanic crust, we conducted a series of deformation experiments on a natural basalt sample at in situ oceanic crust conditions. Dilatancy was measured during deformation. The method consisted in monitoring the volume of pore fluid that flows into or out of the sample at constant pore pressure. Mechanical and microstructural observations at experimental constant strain rate of 10−5 s−1 indicated that the basalt was brittle and dilatant up to 800°C. At higher temperature, the deformation mode became macroscopically ductile and samples compacted. These observations have important implications on heat transfer and fluid migration in oceanic crust.
ISSN: 0094-8276

hal-01172352
https://hal.archives-ouvertes.fr/hal-01172352
DOI : 10.1002/2015GL063437

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The stratigraphy of the last deglaciation sequence is investigated in Lake Saint-Jean (Québec Province, Canada) based on 300 km of echo-sounder two dimensional seismic profiles. The sedimentary archive of this basin is documented from the Late Pleistocene Laurentidian ice-front recession to the present-day situation. Ten seismic units have been identified that reflect spatio-temporal variations in depositional processes characterizing different periods of the Saint-Jean basin evolution. During the postglacial marine flooding, a high deposition rate of mud settling, from proglacial glacimarine and then prodeltaic plumes in the Laflamme Gulf, produced an extensive, up to 50 m thick mud sheet draping the isostatically depressed marine basin floor. Subsequently, a closing of the water body due to glacio-isostatic rebound occurred at 8.5 cal. ka BP, drastically modifying the hydrodynamics. Hyperpycnal flows appeared because fresh lake water replaced dense marine water. River sediments were transferred towards the deeper part of the lake into river-related sediment drifts and confined lobes. The closing of the water body is also marked by the onset of a wind-driven internal circulation associating coastal hydrodynamics and bottom currents with sedimentary features including shoreface deposits, sediment drifts and a prograding shelf-type body. The fingerprints of a forced regression are well expressed by mouth-bar systems and by the shoreface-shelf system, the latter unexpected in such a lacustrine setting. In both cases, a regressive surface of lacustrine erosion (RSLE) has been identified, separating sandy mouth-bar from glaciomarine to prodeltaic muds, and sandy shoreface wedges from the heterolithic shelf-type body, respectively. The Lake Saint-Jean record is an example of a regressive succession driven by a glacio-isostatic rebound and showing the transition from late-glacial to post-glacial depositional systems.
ISSN: 0300-9483

hal-00984683
https://hal.archives-ouvertes.fr/hal-00984683
DOI : 10.1111/bor.12039

Éditeur(s) : Amer Geophysical Union
Résumé : The meridional transport of salt in the Atlantic ocean is an important process for climate, controlling the stability of the meridional overturning circulation. The contribution of transient eddies to this transport is quantified in an eddy resolving North Atlantic model at 1/12 degrees resolution (NATL12), and compared with lower resolution North-Atlantic and global 1/4 degrees models. In NATL12 between 10 degrees N and 40 degrees N, there is a volume loss by evaporation of 0.6 Sverdrups (Sv). The divergence of the eddy flux of salt (normalized by a reference salinity of 34.8) is 0.2 Sv over the region, a significant fraction of the total air-seawater exchange, but it is compensated by an opposite convergent transport of salt by the mean flow, so that the total transport of salt is small. The compensation between eddy and mean salt transport is almost complete in a multicentury long global model experiment, but less effective in NATL12 because the short integration time does not allow the salt content to equilibrate and the model drift is large. Eddies arising from baroclinic instability contribute to the meridional salt transports at the northern and southern boundary of the subtropical gyre, where they appear consistent with a lateral diffusion acting on the mean salinity gradient. However, the eddy transport of salt is the sum of two terms: an advective contribution (arising from the correlations of velocity and isopycnal thicknesses) and a diffusion along isopycnals. Both components have the same amplitude at the southern boundary of the subtropical gyre, while diffusion is dominant at the northern boundary.
Journal Of Geophysical Research-oceans (0148-0227) (Amer Geophysical Union), 2012-05 , Vol. 117 , N. C05010 , P. 19 pp.

Droits : 2012 AGU
http://archimer.ifremer.fr/doc/00083/19441/17052.pdf
DOI:10.1029/2012JC007927
http://archimer.ifremer.fr/doc/00083/19441/