Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
We provide new constraints on the modes of mantle exhumation and denudation in the pre-orogenic Pyrenees by investigating the poorly known peridotites located east of the Lherz body, in eastern Ariè ge (Vicdessos, Urs, Bestiac, Caussou and Prades main peridotitic bodies). We show that: (1) numerous peridotite bodies, not described so far, are constituted by decametric to sub-metric outcrops scattered between and around the main outcrops identified by Monchoux (1970); (2) most of the peridotites form blocks and lenses of various sizes, from millimetric monocrystalline grains to hectometric olistoliths, embedded in debris flows involving mainly Mesozoic metasediments; these peridotites can therefore be linked to the S-type peridotites of Lagabrielle et al. (2010), and share similarities with the peridotites of Lherz region (Clerc et al., 2012). All originated from tectono-sedimentary processes associated with mantle exhumation in relation with extreme thinning and breakoff of the continental basement; (3) the various petrographic characters of these peridotites and their heterogeneity in serpentinisation degree imply a peculiar mode of exhumation, which merges mantle fragments inherited from different structural levels; (4) the lack of tectonic structures such as faults and shear planes associated with the ultramafic-rich breccia formation and the presence of neoformation of metamorphic minerals within the matrix preclude their origin as cataclasites related to the Latest Cretaceous and Tertiary Pyrenean contractional deformation. The peridotites of eastern Ariè ge are indisputable witnesses of the presence of an inverted hyper-extended Cretaceous passive margin forming the current North Pyrenean zone. The geometry of the extensional system was complex and probably associated with strike-slip faults and transcurrent motion. ß 2016 The Authors. Published by Elsevier Masson SAS on behalf of Acadé mie des sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons. org/licenses/by-nc-nd/4.0/).
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01280502
https://hal-insu.archives-ouvertes.fr/insu-01280502
https://hal-insu.archives-ouvertes.fr/insu-01280502/document
https://hal-insu.archives-ouvertes.fr/insu-01280502/file/1-s2.0-S1631071316000043-main.pdf
DOI : 10.1016/j.crte.2015.12.003

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
S U M M A R Y Over the last decade, thermomechanical models have revealed the control of both tectonics and erosion on the morphology of continental plateaus margins. However, unravelling the specific effects of these two coupled processes has been difficult in practice. Here, to assess the control of erosion, we investigate the dynamics of the eastern and the northern borders of the Tibetan Plateau, which are characterized by a low convergence rate and a steep topographic escarpment adjacent to the Sichuan and Tarim basins, respectively. Thermomechanical modelling of continental lithosphere coupled with fluvial denudation reveals that important crustal deformation with large-scale horizontal displacements can occur, without any convergence, as a response to mass transfer due to gravitational collapse and to erosional unloading. These processes are sensitive to crustal structure, geothermal gradient as well as surface erosion. At a timescale of several million years, our results suggest that this denudation-triggered deformation exerts a primary control on the evolution of those plateau margins by counterbalancing the mass removal due to erosion and stabilizing the topographic escarpment. This finding supports a possible explanation for the morphology of the Longmen Shan, eastern Tibet, in which the paradoxical combination of persistent high-topographic gradients close to the foreland and low convergence rates can be related to the influence of erosion on deformation patterns.
ISSN: 0956-540X

hal-01577060
https://hal-amu.archives-ouvertes.fr/hal-01577060
https://hal-amu.archives-ouvertes.fr/hal-01577060/document
https://hal-amu.archives-ouvertes.fr/hal-01577060/file/godard2009erosional.pdf
DOI : 10.1111/j.1365-246X.2009.04324.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
An active seismic experiment has been conducted across the southern Ryukyu margin east of Taiwan over the whole trench-arc-backarc system in May 2009. Twenty-four ocean bottom seismometers (OBS) were deployed from the Ryukyu trench to the southern Okinawa trough over the Ryukyu arc and forearc. Wide angle seismic data were recorded by the OBS array while coincident reflection seismic data were acquired using a 6 km long streamer and a 6600 cubic inch seismic airgun array. Results from tomographic inversion of 21091 travel time picks along this line allowed us to image crustal structures of the Ryukyu margin down to a depth of 25 km. The transect has been designed to provide a better seismic velocity structure of the subduction zone in a highly deformed area that has produced an M8 earthquake in 1920. The line crosses a seismic cluster of earthquakes which source mechanisms are still poorly understood. The subducting oceanic crust of the Huatung Basin is about 5-6 km thick. The underlying mantle exhibits low seismic velocities around 7.8 km/s suggesting some hydrothermal alterations or alteration of the upper mantle through faults generated by the flexure of the subducting plate as it enters the subduction. Low velocities, up to 4.5 km/s, associated with the accretionary wedge are well imaged from the trench back to the Nanao forearc. A major result concerns the abrupt termination of the buttress at the rear of the accretionary wedge. Despite the low resolution of the tomographic inversion near the subduction interface, several lines of evidence supporting the presence of a low velocity zone beneath the toe of the forearc buttress could be established. The Moho beneath the Ryukyu non-volcanic arc is located at a depth around 25 km depth.
ISSN: 0040-1951

hal-00795573
https://hal.archives-ouvertes.fr/hal-00795573
DOI : 10.1016/j.tecto.2011.10.010

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : We report the northernmost and deepest known occurrence of deep-water pycnodontine oysters based on two surveys along the French Atlantic continental margin to the La Chapelle continental slope (2006) and the Guilvinec Canyon (2008) The combined use of multibeam bathymetry seismic profiling CTD casts and a remotely operated vehicle (ROV) made it possible to describe the physical habitat and to assess the oceanographic control for the recently described species Neopycnodonte zibrowii These oysters have been observed in vivo in depths from 540 to 846 m colonizing overhanging banks or escarpments protruding from steep canyon flanks Especially in the Bay of Biscay such physical habitats may only be observed within canyons where they are created by both long-term turbiditic and contouritic processes Frequent observations of sand ripples on the seabed indicate the presence of a steady but enhanced bottom current of about 40 cm/s The occurrence of oysters also coincides with the Interface between the Eastern North Atlantic Water and the Mediterranean Outflow Water A combination of this water mass mixing internal tide generation and a strong primary surface productivity may generate an enhanced nutrient flux which is funnelled through the canyon When the ideal environmental conditions are met up to 100 individuals per m(2) may be observed These deep-water oysters require a vertical habitat which is often incompatible with the requirements of other sessile organisms and are only sparsely distributed along the continental margins The discovery of these giant oyster banks illustrates the rich biodiversity of deep-sea canyons and their underestimation as true ecosystem hotspots (C) 2010 Elsevier Ltd All rights reserved
Deep-sea Research Part I-oceanographic Research Papers (0967-0637) (Pergamon-elsevier Science Ltd), 2010-12 , Vol. 57 , N. 12 , P. 1561-1572

Droits : 2010 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/00023/13419/14034.pdf
DOI:10.1016/j.dsr.2010.09.002
http://archimer.ifremer.fr/doc/00023/13419/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent sedimentary facies and processes along the offshore slope of east Taiwan are investigated using a large set of geophysical and sedimentological data. The Taiwan orogen is often considered as one of the most tectonically active regions in the world and also suffers important climatic activity with an average of four typhoons per year. We have mapped in details the morphosedimentary features and characterized the sedimentary facies along offshore eastern Taiwan. There, we show that the slope is driven by a variety of erosional processes from mass wasting to turbidity current. Mass movements such as slides or mass transport deposits (MTDs) are ubiquitous and affect the whole east coast off Taiwan. Detailed core investigations, such as grain size analysis, chemical and mineralogical composition, revealed that turbidite facies range from thin fine-grained turbidites to thick massive turbidite facies. The detailed analysis of turbidite beds allow us to discuss the controlling factors of turbidity current generation. Turbidity currents represent an important sedimentary process that governs the slope morphology off east Taiwan. Triggering mechanisms likely range from slope instabilities related to earthquakes shaking to failure relative to climatic-controlled pulses of sediment supply. We propose that at least two end-members are characteristics in our turbidite records in term of controlling factor:1) Turbidity currents likely generated by tectonic activity and earthquakes shaking in particular; and2) Turbidity currents likely generated by climatic activity such as typhoon-induced floods.
ISSN: 0025-3227

hal-01277768
https://hal.archives-ouvertes.fr/hal-01277768
DOI : 10.1016/j.margeo.2015.05.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study provides new Ar-40/Ar-39 geochronological constraints on the age of the Alpine tectonics in the Aspromonte Massif (southern part of the Calabrian-Peloritan belt). This massif exposes the upper units of the Calabride Complex which originated from the European continental margin. The Calabride Complex was incorporated in the Alpine orogenic wedge and then integrated into the Apennines and Maghrebides fold- and-thrust belts. Throughout the Calabride Complex there is evidence for a two stage tectonic history, which remains however rather poorly dated: Alpine nappe stacking is followed by extensional reworking along the former thrust contacts or along new detachment surfaces. Our new ages suggest that exhumation of the uppermost units, which accompanied nappe stacking, probably started at 45 Ma and that the deepest units were almost completely exhumed at 33 Ma. This kinematics probably corresponds to syn-orogenic extension while the end of exhumation is clearly related to the extensional tectonics dated at 28.6 Ma along detachment structures.;Our geochronological data reveal a very short lag time between accretional and extensional processes in this part of the Mediterranean Alpine orogenic belt. The direction of extension, when the units are restored to their initial position (i.e. before the opening of the Western Mediterranean basins and the bending of the arc) is NNE-SSW. Such a direction does not fit with the eastward slab-retreat model generally put forward to explain extension in the Western Mediterranean. In contrast, we provide evidence for roughly N-S middle Oligocene extension in the accretionary prism, not previously described in this part of the Mediterranean domain.
ISSN: 0024-4937

hal-00475649
https://hal.archives-ouvertes.fr/hal-00475649
DOI : 10.1016/j.lithos.2009.10.011

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : International audience
The Jurassic Mirdita ophiolite crops out in the western branch of the Hellenide-Dinaride ophiolite belt in the Balkan Peninsula; it represents a remnant of the Tethyan oceanic lithosphere developed between the Apulian and Pelagonian microcontinents. Emplaced during the Cretaceous on the western margin of Pelagonia, the Mirdita ophiolite was involved in southwestward thrusting of the Hellenide-Dinaride tectonic units during the Eocene alpine tectonics. It was little affected, however, by these alpine events as marked by nearly horizontal Cretaceous limestone deposits overlying the ophiolite. A continuous section of Middle Jurassic oceanic crust, including thin gabbros, a N-S-trending sheeted dike complex, and extrusive rocks, is exposed in the central part of the ophiolite and thickens eastward within a regional, N-S-trending synform. Peridotite massifs exposed along the western and eastern edges of this synform show major structural and petrological differences. The eastern ultramafic domain has a harzburgitic mantle exhibiting a high-temperature asthenospheric foliation dipping steeply to moderately to the west. Major chromite deposits are restricted to these eastern ultramafic massifs. The western ultramafic domain has a zoned mantle, with asthenospheric harzburgite exposed at its western margin, progressively replaced eastward by plagioclase-peridotites that were highly strained at low temperatures, and that are bounded by amphibole-peridotites along with crustal rocks. The occurrence of plagioclase is ascribed to melt impregnation processes that occurred immediately before or during intense lithospheric deformation. The gabbros in the eastern massifs are thicker (1-2 km and layered, whereas they are highly thin and discontinuous in the western massifs. Mantle peridotites of the western massifs locally are in direct contact with the overlying diabase and volcanic rocks along ductile shear zones. Development of epidote-amphibolite facies metamorphism in upper-crustal rocks was produced by hydrothermal alteration in the oceanic realm, and was intense and widespread in the western domain. The Mirdita ophiolite likely originated in a short-lived, narrow ocean basin, which was closed during the Middle Jurassic by eastward overthrusting of the western domain, and westward subduction of the eastern domain. This constrictional phase was followed by dextral oblique convergence between the Pelagonian and Apulian microcontinents. This model implies a parautochtonous origin of the Mirdita ophiolite between these two microcontinents.
ISSN: 0020-6814

hal-00456063
https://hal.archives-ouvertes.fr/hal-00456063
DOI : 10.1080/00206810902823982

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : We report rare earth element (REE) and neodymium (Nd) isotope data for the organic fraction of sediments collected from various depositional environments, i.e. rivers (n=25), estuaries (n=18), open-ocean settings (n=15), and cold seeps (n=12). Sedimentary Organic Matter (SOM) was extracted using a mixed hydrogen peroxide/nitric acid solution (20%-H2O2 – 0.02M-HNO3), after removal of carbonate and oxy-hydroxide phases with dilute hydrochloric acid (0.25M-HCl). A series of experimental tests indicate that extraction of sedimentary organic compounds using H202 may be complicated occasionally by partial dissolution of sulphide minerals and residual carbonates. However, this contamination is expected to be minor for REE because measured concentrations in H2O2 leachates are about two-orders of magnitude higher than in the above mentioned phases. The mean REE concentrations determined in the H2O2 leachates for samples from rivers, estuaries, coastal seas and open-ocean settings yield relatively similar levels, with ΣREE = 109 ± 86 ppm (mean ± s; n=58). The organic fractions leached from cold seep sediments display even higher concentration levels (285 ± 150 ppm; mean ± s; n=12). The H2O2 leachates for most sediments exhibit remarkably similar shale-normalized REE patterns, all characterized by a mid-REE enrichment compared to the other REE. This suggests that the distribution of REE in leached sedimentary organic phases is controlled primarily by biogeochemical processes, rather than by the composition of the source from which they derive (e.g. pore, river or sea- water). The Nd isotopic compositions for organic phases leached from river sediments are very similar to those for the corresponding detrital fractions. In contrast, the SOM extracted from marine sediments display εNd values that typically range between the εNd signatures for terrestrial organic matter (inferred from the analysis of the sedimentary detrital fractions) and marine organic matter (inferred from the analysis of local surface seawater). A notable exception is the case of organic matter (OM) fractions leached from cold seep sediment samples, which sometimes exhibit εNd values markedly different from both terrigenous and surface seawater signatures. This suggests that a significant fraction of organic compounds in these sediments may be derived from chemosynthetic processes, recycling pore water REE characterized by a distinct isotopic composition. Overall, our results confirm that organic matter probably plays an important role in the oceanic REE budget, through direct scavenging and remineralization within the water column. Both the high REE abundances and the shape of shale-normalized patterns for leached SOM also suggest that OM degradation in sub-surface marine sediments during early diagenesis could control, to a large extent, the distribution of REE in pore waters. Benthic fluxes of organic-bound REE could hence substantially contribute to the exchange processes between particulates and seawater that take place at ocean margins. Neodymium isotopes could provide useful information for tracing the origin (terrestrial versus marine) and geographical provenance of organic matter, with potential applications in paleoceanography. In particular, future studies should further investigate the potential of Nd isotopes in organic compounds preserved in sedimentary records for reconstructing past variations of surface ocean circulation.
Geochimica Et Cosmochimica Acta (0016-7037) (Pergamon-elsevier Science Ltd), 2014-09 , Vol. 140 , P. 177-198

Droits : 2014 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00191/30250/28682.pdf
DOI:10.1016/j.gca.2014.05.016
http://archimer.ifremer.fr/doc/00191/30250/

Éditeur(s) : Actes de colloques. Ifremer. Brest [ACTES COLLOQ. IFREMER.]. 1991
Résumé : On the bathyal slope for continental margins, steep and rocky substrates punctuated with cliffs and collapsing zones are frequently found. As survey and sampling with the classical technics from the sea surface is practically impossible in such an environment, in situ exploration with a submersible allows significant advances in ecology, with implications in paleoenvironment reconstruction. Mixing of material from shallow-water and deep-sea origins into bathyal sedimentation suggests that the so-called "fossil assemblages of outer platform" were frequently misinterpreted. Dense populations of animals closely related to fossil groups which were only considered as relict of the Past ("living fossils") and previously interpreted as shallow-water inhabitants during geological times can be discovered living in such bathyal communities. The role of bathyal ecological niches during global bioevents brings a new vision of the history of life in the Ocean through geological time and has to be further investigated. Examples from cruises monitoring the diving saucer Cyana (SP 3000) in the Bay of Biscay and off New Caledonia are given.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1990/acte-1138.pdf
http://archimer.ifremer.fr/doc/00000/1138/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Continental rifts and passive continental margins show fundamental along-axis segmentation patterns that have been attributed to one or a number of different processes: extensional fault geometry, variable stretching along strike, preexisting lithospheric compositional and structural heterogeneities, oblique rifting, and the presence or absence of eruptive volcanic centers. The length and width scales of the rift stage fault-bounded basin systems change during the late evolution of the new plate boundary, and the role of magmatism may increase as rifting progresses to continental rupture. Along obliquely spreading ridges, first-order mid-ocean ridge geometries originate during the synrift stage, indicating an intimate relationship between magma production and transform fault spacing and location. The Gulf of Aden rift is a young ocean basin in which the earliest synrift to breakup structures are well exposed onshore and covered by thin sediment layers offshore. This obliquely spreading rift is considered magma-poor and has several large-offset transforms that originated during late stage rifting and control the first-order axial segmentation of the spreading ridge. Widely spaced geophysical transects of passive margins that produce only isolated 2-D images of crust and uppermost mantle structure are inadequate for evaluation of competing rift evolution models. Using closely spaced new geophysical and geological observations from the Gulf of Aden we show that rift sectors between transforms have a large internal variability over short distances (∼10 km): the ocean-continent transition (OCT) evolves from a narrow magmatic transition to wider zones where continental mantle is probably exhumed. We suggest that this small-scale variability may be explained (1) by the distribution of volcanism and (2) by the along-strike differences in time-averaged extension rate of the oblique rift system. The volcanism may be associated with (1) the long-offset Alula-Fartak Fracture Zone, which may enhance magma production on its younger side, or (2) channeled flow from the Afar plume material along the newly formed OCT and the spreading ridge. Oblique extension and/or hot spot interactions may thereby have a significant control on the styles of rifting and continental breakup and on the evolution of many magma-poor margins.
ISSN: 1525-2027

hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866/document
https://hal.archives-ouvertes.fr/hal-00504866/file/G3-Leroy_al-2010.pdf
DOI : 10.1029/2009GC002963

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Maguelone shore extends along the northern coast of the Gulf of Lions, west of the Rhone Delta and east of high-gradient coastal streams that have provided most of the clastic sediments to the Gulf of Lions margin since the early Miocene. This 10 km-wide area is constituted by a small coastal watershed (15 km long) in low-lying carbonate hills, a kilometre-wide marsh, a sandy beach barrier and a shoreface experiencing local low sedimentation rates. This onshore-offshore transition zone is a key area to understand the relationships between erosion, by-pass, deposition and preservation processes. Unlike the neighbouring Rhone deposits that display numerous thick deltaic sequences related to a continuous sediment flux, the Maguelone shore exhibits peculiar sedimentary bodies. The analysis of about 250 km of new VHR seismic profiles acquired over the study area, 9 short cores and outcrops data allowed us to determine the three-dimensional high-resolution geometry of the coastal system tracts from Quaternary to present-day. This revealed dominant denudation processes in the Upstream catchments associated with the formation of incised valleys during Quaternary lowstands. In addition, this study investigates the erosion and deposition mechanisms controlled by littoral hydrodynamics that have been taken place on this shore since the last transgression. In particular, metre-high and hundreds of metre-long sandy bodies constructed by alongshore hydrodynamics were identified and their effect on the morphodynamics of the whole littoral system is discussed. The Maguelone shore can be used as an experimental study for onshore/offshore dynamics under the influence of microtidal wave/current hydrodynamics and very low river-derived sediment flux during a eustatic cycle. Geometry of system tracts across flood plain to shoreface is usually considered to be controlled by relative sea-level changes, and is successfully analysed with 2D sequence stratigraphy cross-shore models. It is observed that in areas like the Maguelone shore, traditional sequence stratigraphy methods might not be fully relevant and need to integrate alongshore hydrodynamical processes.
ISSN: 0025-3227

hal-00421060
https://hal.archives-ouvertes.fr/hal-00421060
DOI : 10.1016/j.margeo.2009.06.008

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The majority of the largest subduction megathrust earthquakes share the common characteristic of rupturing more than one asperity along strike of the margin. Understanding the factors that control coseismic failure of multiple asperities, and thus maximum magnitude, is central for seismic hazard assessment. To investigate the role of asperities size and spacing on maximum magnitude, seismicity rate, and percentage of synchronized ruptures, we use analog models simulating along-strike rupture behavior of megathrust earthquakes. We found negative correlations between the barrier-to-asperity length ratio Db/Da and maximum magnitude and seismicity rate. Db/Da also controls the process of asperities synchronization along the megathrust. A permanent barrier behavior is observed for Db/Da > 0.5. Comparing our experimental results to the Nankai Trough historical seismicity, we propose that the distribution of megathrust frictional heterogeneities likely explains the diversity of earthquakes which occurred there.
ISSN: 0094-8276

hal-01685546
https://hal.archives-ouvertes.fr/hal-01685546
https://hal.archives-ouvertes.fr/hal-01685546/document
https://hal.archives-ouvertes.fr/hal-01685546/file/Corbi_et_al-2017-Geophysical_Research_Letters.pdf
DOI : 10.1002/2017GL074182

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : The Maguelone shore extends along the northern coast of the Gulf of Lions margin, West of the Rhone delta and East of some high gradient coastal streams that have been providing most of the elastic sediments to the Gulf of Lions margin since the early Miocene. This 10 km wide area comprises an onshore small coastal watershed (15 km long) in low-lying carbonate hills, kilometer wide marshes, sandy beach and shoreface featuring local low sedimentation. Deposit architecture in such a coastal zone records dynamics of incised valley fill under the influence of rivers and wave/current hydrodynamics in a microtidal environment during an eustatic cycle.;A detailed analysis of about 250 km of very high resolution seismic profiles, tens of cores and outcrops data revealed the evolution of the Maguelone coastal system from Late-Quaternary to present-day. It highlighted also dominant denudation processes in the upstream catchments associated to the formation of incised valley seaward during Quaternary. Combination of this inherited morphology together with hydrodynamics controlled the lagoonal environment evolution since the last transgression. In particular, the Maguelone shore is characterized by the formation of built-over-rias lagoonal systems and records an evolution from partially protected lagoon to isolated lagoon environment. These two stages of lagoon evolution correspond to distinct deposit environments. Correlation of fauna contents with deposit geometry improves lagoonal environment models.
EISSN: 1777-5817

hal-00486370
https://hal.archives-ouvertes.fr/hal-00486370
DOI : 10.2113/gssgfbull.181.2.211

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Urucum region (Mato Grosso do Sul, Brazil) contains Neoproterozoic–Cambrian manganese ore in the layers Mn-1, Mn-2, and Mn-3, which are interbedded with iron formations (IFs) from the Santa Cruz Formation (Jacadigo Group) and surrounded by carbonate rocks from the Bocaina and Tamengo Formations (Corumbá Group). These rocks fill an ancient graben, with sediments from the Santa Cruz Formation overlying fluvial deposits from the Urucum Formation and limestones from the Bocaina and Tamengo Formations deposited in the shallow marginal regions. As the graben deepened, it was flooded with microbe-rich seawater and hydrothermalism began. Iron and manganese precipitated within the pores in arkosic sandstones, thereby forming the clastic Lower Mn-1 ore layer. The remaining manganese was simultaneously deposited on the basin floor with clastic clay and silt from turbidity currents, thereby forming the Upper Mn-1 clastic–chemical ore layer. The sedimentation of Mn-1 and its host IFs was controlled by seawater saturation and homogeneous oxidation, which caused manganese and iron sedimentation and the death of microorganisms, generating mangano-ferriferous sediments with high P, Co and Ni contents. Mn-2 formed during periods of tectonic quiescence through water influxes that carried abundant microbes, Fe(II), Mn(II), and SiO2. Under UV radiation, these microbes oxidized Mn(II) and Fe(II) to form hydroxides and died, thereby forming biomass that was enriched in P, Co and Ni and minor carbonate adjacent to and below the oxycline. These microbes also formed kremydilites, oblate structures that resemble manganese stromatolites, within the biomass and produced CH4 and/or H2 gas bubbles. During early diagenesis, wormlike organisms inhabited the biomass and probably separated iron from manganese to produce cryptomelane microbialites, which agglutinated to form manganese micronodules that coalesced to form the massive layer Mn-2. This process ended with the disappearance of microorganisms and the sedimentation of the IFs, and a new water influx generated layer Mn-3 via the same process. The final seawater upwelling precipitated IFs in the basin depocenter, whereas limestone from the Tamengo Formation was deposited along the basin’s edges. The diagenesis initially transformed the manganese oxides into cryptomelane and then into hollandite.
ISSN: 0169-1368

hal-01684668
https://hal.archives-ouvertes.fr/hal-01684668
DOI : 10.1016/j.oregeorev.2017.09.018

Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : LA-ICP-MS and SIMS U–Pb analyses have been performed on detrital zircon grains from four heavy mineral rich metasediments collected at different levels of the Nathorst Land Group (Eleonore Bay Supergroup, Greenland). Zircons from high-grade samples collected in the sillimanite and migmatite zones exhibit modifications to their structure, which are lacking in grains from a low-grade sample (0.3 GPa and 350–400 °C). In the sillimanite zone (0.5 GPa, 650 °C), thin discontinuous rims (<20 μm) plating detrital zircon grains document a metamorphic overgrowth during the Caledonian event dated at 428 ± 25 Ma (2σ). In the migmatite zone (0.4 GPa, 700 °C), zircons underwent severe recrystallisation processes but no new zircon growth. Ilmenite, which constitutes over 50% of the heavy mineral layers, underwent recrystallisation in both high-grade samples and is likely to represent the main source of Zr available for growth of zircon rims in the sillimanite zone. However, in the migmatite zone sample, the metamorphic conditions allowed titanite overgrowth around ilmenite, which acted as a sink for Zr and inhibited new zircon growth. 207Pb/206Pb ages for 152 detrital zircons broadly range between 2800 and 990 Ma. The detrital zircon age signature is characterized by the large predominance of late Paleoproterozoic (1.85–1.60 Ga) grains in all analysed samples and by lesser amounts of Archean (2.7–2.8 Ga) and Mesoproterozoic (1.2–1.0 Ga) zircons. The overall age range indicates that detritus can be sourced from the Labradorian and Makkovikian provinces of northeastern Laurentia. The youngest grain analysed (987 ± 18 Ma) indicates that deposition took place during the Neoproterozoic, in a post-Grenvillian sedimentary environment and was likely coeval with the Mid-Neoproterozoic episode of aborted rifting that affected the eastern margin of Laurentia. The lack of detritus originating from Amazonia or Baltica, placed adjacent to Laurentia during the early stages of Rodinia fragmentation, suggests that these two continental landmasses did not constitute a topographic high during the Neoproterozoic or that the Mid-Neoproterozoic rifting opened toward an open ocean to the north of a combined Laurentia/Baltica, thus resulting in a general south to north direction of transport of the sediments.
ISSN: 0301-9268

hal-00407204
https://hal.archives-ouvertes.fr/hal-00407204
DOI : 10.1016/j.precamres.2007.01.002

Éditeur(s) : HAL CCSD
Résumé : International audience
MOTIVATION: Imaging mass spectrometry (IMS) is a maturating technique of molecular imaging. Confidence in the reproducible quality of IMS data is essential for its integration into routine use. However, the predominant method for assessing quality is visual examination, a time consuming, unstandardized and non-scalable approach. So far, the problem of assessing the quality has only been marginally addressed and existing measures do not account for the spatial information of IMS data. Importantly, no approach exists for unbiased evaluation of potential quality measures. RESULTS: We propose a novel approach for evaluating potential measures by creating a gold-standard set using collective expert judgements upon which we evaluated image-based measures. To produce a gold standard, we engaged 80 IMS experts, each to rate the relative quality between 52 pairs of ion images from MALDI-TOF IMS datasets of rat brain coronal sections. Experts' optional feedback on their expertise, the task and the survey showed that (i) they had diverse backgrounds and sufficient expertise, (ii) the task was properly understood, and (iii) the survey was comprehensible. A moderate inter-rater agreement was achieved with Krippendorff's alpha of 0.5. A gold-standard set of 634 pairs of images with accompanying ratings was constructed and showed a high agreement of 0.85. Eight families of potential measures with a range of parameters and statistical descriptors, giving 143 in total, were evaluated. Both signal-to-noise and spatial chaos-based measures performed highly with a correlation of 0.7 to 0.9 with the gold standard ratings. Moreover, we showed that a composite measure with the linear coefficients (trained on the gold standard with regularized least squares optimization and lasso) showed a strong linear correlation of 0.94 and an accuracy of 0.98 in predicting which image in a pair was of higher quality. AVAILABILITY AND IMPLEMENTATION: The anonymized data collected from the survey and the Matlab source code for data processing can be found at: https://github.com/alexandrovteam/IMS_quality. CONTACT: theodore.alexandrov@embl.de
Bioinformatics (Oxford, England)

hal-01163754
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01163754
DOI : 10.1093/bioinformatics/btv266
PUBMED : 26072506

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Coupling between erosion and tectonics is thought to play a determinant role in orogenic evolution. Here, we investigate the interplay in this coupling between the assumed erosion law and the crustal rheology at the margin of a collisional plateau, like the Himalaya of Central Nepal. Lithospheric deformation is calculated over a time scale of 100 kyr by a 2D finite element model that incorporates the rheological layering of the crust and the main features of the convergence across the range. For the upper boundary condition, two surface processes were tested: a linear diffusion model and a 1D1/2 integrative model including fluvial incision along the fluvial network and hillslope erosion by landsliding. Model results and their sensitivity to the chosen combinations of erosion law and crustal properties are discussed in light of the constraining geologic and geomorphologic observations. In contrast with the conclusions of Cattin and Avouac [2000] , where a compliant quartz-rich crustal rheology and diffusion law were required, we combine a composite quartz-diabase rheology for the crust with fluvial incision erosion law to account for erosion and elevation profiles across the Himalaya of Central Nepal. More generally, it is proposed that, because of the interplay between the dominant denudation conditions and the rheology of the crust, both well documented erosion rates and processes can provide significant constraints on crustal properties within an active orogen.
ISSN: 0094-8276

hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697/document
https://hal.archives-ouvertes.fr/hal-00788697/file/godard_et_al.pdf
DOI : 10.1029/2004GL021006

Éditeur(s) : American Geophysical Union
Résumé : The Fairway Ridge is a buried continental structure that separates the Fairway Basin from the New Caledonia Basin. The proposed Cretaceous age of the Fairway Basin has remained highly hypothetical to date. Deep offshore petroleum exploration wells revealed well-dated Mesozoic carbonaceous sedimentary rocks in the Taranaki Basin at the southern end of the Aotea Basin. In this paper we use geophysical data to confirm the continuity of the 2000 km long Fairway-Aotea Basin connecting New Caledonia to New Zealand and prove its early Late Cretaceous age. Analysis of seismic reflection profiles together with newly compiled gravity and magnetic maps reveals Late Cretaceous NE–SW trending lineaments projecting northeastward from major Tasman Sea fracture zones and the Bellona Trough, which demonstrate that the opening of the Fairway-Aotea Basin predates the opening of the Tasman Sea. This result combined with observations of the Mesozoic regional geology suggests that the Lord Howe, Fairway, and Norfolk ridges are part of a remnant late Early Cretaceous continental arc, which was fragmented into three pieces by the late Early to early Late Cretaceous. This event might be contemporaneous with a plate motion change between the Gondwana and Pacific plates and/or the arrival of the Hikurangi plateau in the subduction zone around 105 Ma, which caused the cessation of subduction along this plate boundary. We interpret either of those two events as being possible trigger events for the post–Early Cretaceous fragmentation of the eastern Gondwana margin in a slab retreat process.
Geochemistry Geophysics Geosystems - G3 (1525-2027) (American Geophysical Union), 2009-12 , Vol. 10 , N. 12 , P. 1-24

Droits : 2009 American Geophysical Union
http://archimer.ifremer.fr/doc/2009/publication-7322.pdf
DOI:10.1029/2009GC002612
http://archimer.ifremer.fr/doc/00000/7322/