Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Heletz sandstone (Israel) reactivity is studied by means of CO2-rich brine percolation experiments and modeling. Experiments are performed at in situ temperature and pressure conditions with two distinctly different injection flow rates and for two different brine compositions: the genuine Heletz brine and a similar brine but in equilibrium with gypsum. The Heletz sandstone is composed of quartz, dolomite, ankerite, K-feldspar, clay minerals and minor amounts of gypsum and pyrite. The main reaction is the dissolution of the carbonates which is fastest for the highest flow rate injection and for the genuine Heletz brine. Permeability increases during the five percolation experiments, regardless of flow rate and brine type. This increase in permeability is associated to a decrease in porosity during the gypsum-equilibrated brine experiments due to gypsum precipitation. The precipitation of secondary minerals (kaolinite, muscovite and smectite) is mainly controlled by the dissolution of K-feldspar and largest at low flow rate injection, indicating that these precipitation processes are diffusion-controlled and localized in immobile zones where favorable chemical micro-environments exist. These processes are quantified by means of a reactive transport model. These results indicated that the CO2 injection at the Heletz site should trigger both permeability increase in interface between brine and CO2, which may extend over a large extension and where mixing processes are very active, especially near the well under intermittent injection conditions.
ISSN: 1750-5836

hal-01356329
https://hal.archives-ouvertes.fr/hal-01356329
DOI : 10.1016/j.ijggc.2015.10.023

Éditeur(s) : HAL CCSD
Résumé : The main purpose of this thesis was to characterize and to model the hydrodynamic and thermochemical processes leading to the alteration of the wellbore cement materials under borehole conditions. Percolation experiments were performed on fractured cement samples under CO2 storage conditions (60°C and 10MPa). Injection flow rate was dictated by the fracture aperture of each sample. CO2 enriched brine was flowed along the fracture aperture, and permeability changes as well as chemical evolution of major cations were continuously acquired during the experiment time. Reaction paths developed by the alteration of the cement were characterized using microtomography and ESEM images. The experiments conducted using samples presenting large fracture apertures during 5h showed that permeability was maintained constant during the experiment time. Three reacted layers were displaying by the alteration of portlandite and CSH. Long term experiment (26h) conducted with large initial fracture aperture showed a decrease of the permeability after 15hours of CO2 exposure. Otherwise, experiments performed on samples presenting narrow apertures indicated the conversion of portlandite and CSH to calcite leading to the permeability reduction and the fracture clogging. Assemblages of phases and chemical changes were modelled using GEMS-PSI speciation code. We studied also using a coupled transport-reactive model the conditions leading to the cement alteration and the formation of associated layers.
L'objectif de cette thèse était de modéliser à partir des expériences de percolation-réactive, les processus hydrodynamique et réactionnel qui gouvernent l'altération des ciments de puits. Différentes expériences ont été réalisées dans des conditions représentatives de celles du stockage du CO2. Des échantillons fracturés ont été utilisés pour injecter une saumure enrichie en CO2 à 60°C et 10MPa et à différentes pressions partielles de CO2. Le débitd'injection variait en fonction des propriétés hydrauliques de l'échantillon exposé. L'injection d'une saumure enrichie en CO2 à débit constant à travers une fracture supposée plane a permis d'étudier les modifications des propriétés hydrodynamiques et ces conséquences sur la géochimie et la microstructure du ciment altéré. L'impact dynamique de l'évolution microstructurale a été mis en évidence. Les expériences conduites sur des échantillons présentant de larges ouvertures, réalisées sur une durée de 5 h, ont montré que la perméabilité était maintenue constante le long de l'expérience. Trois couches d'altération se sont développées consécutivement à la dissolution de la portlandite et la décalcification des CSH. L'altération a entrainé la précipitation des carbonates et de la silice amorphe à proximité de la fracture. Dans le cas d'une expérience longue durée appliquant les mêmes conditions que précédemment on a observé que la croissance de la silice amorphe a entrainé la diminution de la perméabilité. Par ailleurs les expériences effectuées sur des échantillons présentant de faibles ouvertures, ont indiqué que la conversion de la portlandite en calcite conduit au colmatage de la fracture. L'évolution des assemblages de phases conduisant à la formation des carbonates et de la silice amorphe a été modélisée à partir du code géochimique GEMS. Les mécanismes de diffusion et les processus de mise en place des couches d'altération ont été étudiés à partir d'un modèle analytique et d'un modèle de transport réactif à partir du code géochimique PHREEQC.
https://tel.archives-ouvertes.fr/tel-01038034

tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034/document
https://tel.archives-ouvertes.fr/tel-01038034/file/theseabdoulghafour.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
More and more animal species are endangered every day on earth. In order to study their adaptation to world and climate change and their chances of survival, numerous initiatives have been taken that mostly need human intrusion into animal communities. Today mobile devices enable researchers to go beyond this limit. In this paper, we propose an original solution that consists on a new framework for detecting individual songs in a bird population and identifying remotely by this way their collective behavior in movements without human interaction. Movement patterns are elicited by analyzing data collected via wireless sensors fitted with microphone. Whereas similar methods use mobile devices fitted on some specimens, we rather propose fixed sensors. We demonstrate that this solution provides a good answer to technical constraints assessed by the context and we discuss results of experimental simulations that allow to define optimized parameters for the architecture to be set up on the ground. Experimental results are provided and show the relative impact of different parameters such as the number of sensors or the population size on the detection rate.
Proceedings of the 8th International Conference on Advances in Mobile Computing and Multimedia (MOMM 2010)

hal-00601641
https://hal.archives-ouvertes.fr/hal-00601641

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report new structural, microstructural, petrological, and major- and trace-element data on ultramafic rocks from the Kondyor zoned ultramafic complex in Far-East Russia. The ultramafic rocks are subdivided into three subconcentric lithologies, from core to rim: (1) a metasomatic domain where generally phlogopite-rich dykes pervasively intrude dunite; (2) a main dunite core; (3) a pyroxenite rim. The ultramafic rocks have nearly vertical contacts with the surrounding Archaean basement (gneisses, quartzites and marbles) and hornfelsed Riphean sediments. The hornfelsed sediments show a relatively steep ( 60), outward dipping layering, which rapidly flattens to horizontal away from the inner contact. Although the Riphean sediments define a dome-like structure, the inward, shallow dipping foliation of the dunites indicates a synformal structure. Detailed petro-structural investigations indicate that the Kondyor dunites were deformed by solid-state flow under asthenospheric mantle conditions. The outward textural change from coarse- to fine-grained equigranular dunite and the outward-increasing abundance of subgrains and recrystallized olivine grains suggest dynamic recrystallization while fluid circulation was channelized within the core metasomatic zone, with a decreasing melt fraction from core to rim, and also suggest that solid-state deformation induced grain-size reduction towards the cooling border of the Kondyor massif. Based on their geochemistry, the dunites are interpreted as mantle rocks strongly affected by reaction with melts similar to the JurassicCretaceous Aldan Shield lamproites. Rim pyroxenites were formed by a melt-consuming peritectic reaction, implying the existence of at least a small, conductive thermal gradient around the dunite body while the latter was still at near-solidus temperature conditions. This suggests that the zoned structure of Kondyor was initiated at mantle depths, most probably within the subcontinental lithosphere. Upon cooling, the lamproitic melts were progressively focused in the central part of the massif and drained into vein conduits where they reacted with the wall-rock dunite. Two-dimensional numerical modelling based on finite-differences with a marker-in-cell technique incorporates temperature-dependent rheologies for both molten and non-molten host rocks. The modelling consolidates the structural, petrological and geochemical interpretations, which show that the dunites represent the synformal, flat-lying apex of an asthenospheric mantle diapir, triggered by fluid pressure channelized in the core, which nearly reached the Earths surface. We conclude that translithospheric mantle diapirism is an important mode of mass transfer in the Earth.
ISSN: 0022-3530

hal-00424508
https://hal.archives-ouvertes.fr/hal-00424508
DOI : 10.1093/petrology/egn083

Éditeur(s) : HAL CCSD
Résumé : International audience
Semi-volatile organic compounds (SVOCs) partition indoors between the gas phase, airborne particles, settled dust, and other surfaces. Unknown concentrations of SVOCs in the gas phase (Cg) can be predicted from their measured concentrations in airborne particles. In previous studies, the prediction of Cg depended largely on choosing a specific equation for the calculation of the particle/gas partition coefficient. Moreover, the prediction of Cg is frequently performed at a reference temperature rather than the real indoor temperature. In this paper, a probabilistic approach based on Monte Carlo simulation was developed to predict the distribution of SVOCs' Cg from their concentrations in airborne particles at the target indoor temperature. Moreover, the distribution of the particle/gas partition coefficient of each SVOC at the target temperature was used. The approach was validated using two measured datasets in the literature: the predicted Cg from concentrations measured in airborne particles and the measured Cg were generally of the same order of magnitude. The distributions of the Cg of 66 SVOCs in the French housing stock were then predicted. The SVOCs with the highest median Cg, ranging from 1 ng/m3 to > 100 ng/m3, included 8 phthalates (DEP, DiBP, DBP, DEHP, BBP, DMP, DiNP, and DMEP), 4 polycyclic aromatic hydrocarbons (fluorene, phenanthrene, fluoranthene, and anthracene), 2 alkylphenols (4-tert-butylphenol and 4-tert-octylphenol), 2 synthetic musks (galaxolide and tonalide), tributyl phosphate, and heptachlor. The nationwide, representative, predicted Cg values of SVOCs are frequently of the same order of magnitude in Europe and North America, whereas these Cg values in Chinese and Indian dwellings and the Cg of polybrominated diphenyl ethers in U.S. dwellings are generally higher. © 2016 Elsevier B.V.
Science of the Total Environment

hal-01467547
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01467547
DOI : 10.1016/j.scitotenv.2016.10.074
PUBMED : 27788447

Éditeur(s) : HAL CCSD Société Française de Photogrammétrie et de Télédétection
Résumé : International audience
ISSN: 1768-9791

hal-01092523
https://hal-agroparistech.archives-ouvertes.fr/hal-01092523

Éditeur(s) : HAL CCSD
Résumé : International audience
The carbon capture and storage is considered as one of the solutions of reducing the effects of global warming. It consists in injecting large quantities of CO 2 in supercritical form directly into deeply located geological formations. One of the methods involves sequestration in the carbonate sedimentary rocks (sandstones and limestones) which are considered as a promising solution. The morphology of the pore network and solid skeleton defines important macroscopic prop-erties of the rock (permeability, stiffness). Modelling at micro scale of random heterogeneous materials (porous media) should be based on morphological and statistical characterisation 1,2 of the investigated microstructure. The work is focused on a reconstruction method by grains deposit 3 , for various range of pa-rameters, to obtain equivalent model of natural rock samples (oolitic limestone and fontainebleau sandstone). Generated samples satisfy morphological and statistical informations 4 which were obtained by 3D image analysis of X-ray tomography of the natural rock samples. For validation of the modelling numerical computations of mechanical and transfer properties are also provided.
14th European Mechanics of Materials Conference - EMMC14
Gothembourg, Sweden

hal-01103163
https://hal.archives-ouvertes.fr/hal-01103163

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Until recently, our ability to implement and assess spatial marine management approaches has been limited by a lack of information regarding processes that bind marine ecosystems, including habitat locations, larval and adult movement, trophic interactions, and fisher behavior. However, recent advances in habitat-mapping technologies, genetics, marine microchemistry, animal tracking and numerical modeling have greatly enhanced our knowledge of these processes. Although these advances have yet to be fully integrated into management decisions, they have the potential to revolutionize spatial marine management. Nevertheless, this revolution will require advances in our ability to share and integrate data into models of marine ecosystems.
ISSN: 1877-3435

hal-00609464
https://hal.archives-ouvertes.fr/hal-00609464
DOI : 10.1016/j.cosust.2010.02.002

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Reactivation of structures inherited from previous collisional or rifting events, especially lithospheric-scale faults, is a major feature of plate tectonics. Its expression ranges from continental break-up along ancient collisional belts(1,2) to linear arrays of intraplate magmatism and seismicity(3,4). Here we use multiscale numerical models to show that this reactivation can result from an anisotropic mechanical behaviour of the lithospheric mantle due to an inherited preferred orientation of olivine crystals. We explicitly consider an evolving anisotropic viscosity controlled by the orientation of olivine crystals in the mantle. We find that strain is localized in domains where shear stresses on the inherited mantle fabric are high, and that this leads to shearing parallel to the inherited fabric. During rifting, structural reactivation induced by anisotropy results in oblique extension, followed by either normal extension or failure. Our results suggest that anisotropic viscosity in the lithospheric mantle controls the location and orientation of intraplate deformation zones that may evolve into new plate boundaries, and causes long-lived lithospheric-scale wrench faults, contributing to the toroidal component of plate motions on Earth.
ISSN: 1752-0894

hal-00413033
https://hal.archives-ouvertes.fr/hal-00413033
DOI : 10.1038/ngeo528

Éditeur(s) : HAL CCSD
Résumé : International audience
Although earthquakes and tsunamis are less frequent in the Dover Straitthan over active subduction zones, a plausible potential exists for intraplate earthquakes of magnitude Mw=6.9 generating a tsunami with damaging consequences. In April 1580, an earthquake shook the region violently and destructions were reported as far as London in the north andRouen in the south. Despite fair weather conditions, a series of abnormal sea waves was reported in several harbours (Calais, Boulogne and Dover) on the same day. A first step was to produce a range of numerical coseismic tsunami simulations and to compare them with historical witness accounts. Results raise the question of whether such earthquakes could also triggerchalk flow-generated tsunamis along cliff lines on both sides of the Strait. Gravity-driven collapses affect thechalk cliffs periodically, but local tsunami waves caused by very large mass movements could reach heights of several meters and, for example, strike Dover.
Proceedings of the 15th World Conference on Earthquake Engineering
Lisbonne, Portugal

halshs-01291496
https://halshs.archives-ouvertes.fr/halshs-01291496

Éditeur(s) : HAL CCSD
Résumé : International audience
The deformation of natural systems in response to subsurface water storage and redistribution provides insightsinto the main water flow path within heterogeneous systems, including the role of faults or fractures. A longbaseline tiltmeter was installed in the low-noise underground laboratory of Rustrel (LSBB) to study the responseof the Fontaine de Vaucluse (FDV) karst hydrosystem to water cycle. Tilt data and piezometric levels recorded in aborehole close to the LSBB show a strong correlation with the discharge of the system observed at the FDV spring30 km away. Over several months, tilt data were recorded on three base lines, thus allowing, for the first time,to study the tilt gradient variation that appears homogeneous. Such information provides a significant constrainton hydrological processes leading to the measured deformation. Several deformation models were tested usingthe ADELI code to estimate the type of hydro-mechanical structure that could reproduce the measured tilt andits gradient. On one hand, models show that uniform loading at the surface produces a much smaller signal thanobserved on measured data. On the other hand, the deformation related to the filling of a fracture following aprecipitation event requires unrealistic fracture size. Finally, we found that a suitable hydro-mechanical modelcorresponds to the loading of numerous fractures at the interface between the saturated and unsaturated zones. Sucha configuration predicts a tilt distribution in agreement with observations. This study suggests that tilt networksinto a karst system should provide key observation for deciphering hydrological processes
Geophysical Research Abstracts
Vienne, Austria

insu-01308594
https://hal-insu.archives-ouvertes.fr/insu-01308594

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
More than 10 years of geodetic measurements demonstrate an uplift rate of 1–3 mm/yr of the high topography region of the Western Alps. By contrast, no significant horizontal motion has been detected. Two uplift mechanisms have been proposed: (1) the isostatic response to denudation responsible for only a fraction of the observed uplift and (2) the rebound induced by the Wurmian ice cap melting which predicts a broader uplifting region than the one evidenced by geodetic observations. Using a numerical model to fit the geodetic data, we show that a crustal viscosity contrast between the foreland and the central part of the Alps, the latter being weaker with a viscosity of 1021 Pa s, is needed. The vertical rates are enhanced if the strong uppermost mantle beneath the Moho is interrupted across the Alps, therefore allowing a weak vertical rheological anomaly over the entire lithosphere.
ISSN: 0094-8276

hal-01332757
https://hal.archives-ouvertes.fr/hal-01332757
DOI : 10.1002/2016GL067821

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep-seated gravitational spreading (DSGS) affects the slopes of formerly glaciated mountain ridges. On Mars, DSGS has played a key role in shaping the landforms of the giant Valles Marineris troughs. Though less spectacular, DSGS is common in terrestrial orogens, where understanding its mechanics is critical in the light of the ongoing climate change because it is a potential source of catastrophic landslides in deglaciated valleys. We conducted parametric numerical studies in order to identify important factors responsible for DSGS initiation. DSGS models are computed using an elastoviscoplastic finite element code. Using ADELI's software, we reproduce topographic ridge spreading under the effect of valley unloading. Two types of spreading topographic ridges are investigated, homogeneous or with horizontal rheological layering. We find that gravitational instabilities are enhanced by high slopes, which increase gravitational stress, and low friction and cohesion, which decrease yield stress. In the unlayered ridge, instability is triggered by glacial unloading with plastic strain concentration inside the ridge and at the base of the high slopes. Vertical fractures develop in the upper part of the slope, potentially leading to fault scarps. Ridge homogeneity promotes a deformation mode controlled by uphill-facing normal faulting and basal bulging. In the second case, the ridge encompasses horizontal geological discontinuities that induce rock mass anisotropy. Discontinuity located at the base of the slope accumulates plastic strain, leading to the formation of a sliding plane evolving into a landslide. The presence of a weak layer at ridge base therefore promotes another slope deformation mode ending up with catastrophic failure. Mechanical conditions and slope height being equal, these conclusions can probably be extrapolated to Earth. Compared with Mars, DSGS on Earth is inhibited because terrestrial topographic gradients are lower than in Valles Marineris, an effect counterbalanced by increased gravitational stress, where the intensity of deformation is enhanced because of the Earth gravity potential.
ISSN: 0169-555X

hal-01420007
https://hal.archives-ouvertes.fr/hal-01420007
DOI : 10.1016/j.geomorph.2016.06.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD
Résumé : International audience
After the 2009 Morakot typhoon, which triggered numerous large landslides in Taiwan, Mouyen et al. (2013)showed for the first time the potential of time-lapse gravity survey to infer the mass of sediments transferringby landsliding or through rivers. By providing an integrated measurement of masses, gravimetry might thus becomplementary to common methods used to assess the sediments discharge of rivers. But the masses of rocksdisplaced by Morakot were exceptionally large as a result of the record-breaking rainfalls brought by this typhoonand one might wonder to what extent time-lapse gravimetry could record such sediment transfers. In order tobetter assess the capabilities of this method, we set a time-lapse gravity network dedicated to the monitoring ofsuch sediments transfers in Paolai village (south-central Taiwan). Paolai is located near the large Laonong riverwhere temporary alluvial deposits of sediments exist and face steep mountain slopes likely to experience landslides.Both features are considered as potential source of mass transfers, and in turn of temporal gravity changes. Thefirst base gravity measurements were done in November 2015, using absolute and relative gravimeters, and will berepeated every year, before and after the typhoon season. In the same time, we also use a terrestrial lidar to scan thegeometry of both the river and the mountain slopes, hence providing a detailed topographical survey of the studiedarea. Adding Lidar measurements is an efficient strategy to solve for the non-uniqueness of gravity solutions.Meanwhile, we use the Eros morphodynamic model, that combine landsliding and flooding models, to investigatevarious scenarios of landsliding and subsequent sediment transport and compute the gravity changes on a virtualnetwork of gravimeters. This gives us insights on the expected order of magnitudes for these surface sedimenttransfers, which are useful to unravel the induced gravity signal from others sources such as local hydrology orvertical ground displacements. The modeling results also enable us to set network location that are best defined todetect mass changes associated with sediment transfer. The main objective of this study is to test whether timelapsegravity brings a new and reliable information compared to present methods monitoring sediments transfersand landscape evolution.
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01308554
https://hal-insu.archives-ouvertes.fr/insu-01308554

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
This is the second of two papers investigating the mechanical response of cemented granular materials by means of contact dynamics simulations. In this paper, a two-dimensional polydisperse sample with high void ratio is sheared in a load-controlled simple shear numerical device until the stress state of the sample reaches the yield stress. We first study the stress transmission properties of the granular material in terms of the fabric of different subsets of contacts characterized by the magnitude of their normal forces. This analysis highlights the existence of a peculiar force carrying structure in the cemented material, which is reminiscent of the bimodal stress transmission reported for cohesionless granular media. Then, the evolution of contact forces and torques is investigated trying to identify the micromechanical conditions that trigger macroscopic yielding. It is shown that global failure can be associated to the apparition of a group of particles whose contacts fulfill at least one of the local rupture conditions. In particular, these particles form a large region that percolates through the sample at the moment of failure, evidencing the relationship between macroscopic yielding and the emergence of large-scale correlations in the system.
ISSN: 1539-3755

hal-00523451
https://hal.archives-ouvertes.fr/hal-00523451
DOI : 10.1103/PhysRevE.82.011304

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Estrogen receptors (ERs) α and β are distributed in most tissues of women and men. ERs are bound by estradiol (E2), a natural hormone, and mediate the pleiotropic and tissue-specific effects of E2, such as proliferation of breast epithelial cells or protection and differentiation of neuronal cells. Numerous environmental molecules, called endocrine disrupting compounds, also interact with ERs. Phytoestrogens belong to this large family and are considered potent therapeutic molecules that act through their selective estrogen receptor modulator (SERM) activity. Using breast cancer cell lines as a model of estrogen-dependent proliferation and a stably ER-expressing PC12 cell line as a model of neuronal differentiating cells, we studied the SERM activity of major dietary compounds, such as apigenin, liquiritigenin, daidzein, genistein, coumestrol, resveratrol and zearalenone. The ability of these compounds to induce ER-transactivation and breast cancer cell proliferation and enhance Nerve Growth Factor (NGF) -induced neuritogenesis was assessed. Surprisingly, although all compounds were able to activate the ER through an estrogen responsive element reporter gene, they showed differential activity toward proliferation or differentiation. Apigenin and resveratrol showed a partial or no proliferative effect on breast cancer cells but fully contributed to the neuritogenesis effect of NGF. However, daidzein and zearalenone showed full effects on cellular proliferation but did not induce cellular differentiation. In summary, our results suggest that the therapeutic potential of phytoestrogens can diverge depending on the molecule and the phenotype considered. Hence, apigenin and resveratrol might be used in the development of therapeutics for breast cancer and brain diseases.
ISSN: 0041-008X

hal-01558816
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01558816
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01558816/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01558816/file/Lecomte%20et%20al.%20-%20Assessment%20of%20the%20potential%20activity%20of%20major%20diet.pdf
DOI : 10.1016/j.taap.2017.04.005

Éditeur(s) : HAL CCSD
Résumé : International audience
Until recently, our ability to implement and assess spatial marine management approaches has been limited by a lack of information regarding processes that bind marine ecosystems, including habitat locations, larval and adult movement, trophic interactions, and fisher behavior. However, recent advances in habitat-mapping technologies, genetics, marine microchemistry, animal tracking and numerical modeling have greatly enhanced our knowledge of these processes. Although these advances have yet to be fully integrated into management decisions, they have the potential to revolutionize spatial marine management. Nevertheless, this revolution will require advances in our ability to share and integrate data into models of marine ecosystems.
Current opinion in environmental sustainability

hal-00473438
https://hal.archives-ouvertes.fr/hal-00473438
DOI : 10.1016/j.cosust.2010.02.002

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The anisotropic single crystal seismic properties are reviewed in the light of recent experimental and theoretical determinations. Although considerable progress has been made on the determination of single crystal properties, data are still lacking, particularly for the temperature derivatives of transition zone and lower mantle phases. The common types of LPO of olivine, opx and cpx are presented together with their associated seismic properties. It is emphasized that simple seismic symmetry pattern of upper mantle rocks are a direct result of the interaction of olivine, opx and cpx. Using the standard structural frame (X lineation, Z pole to foliation) for typical LPOs of olivine, opx and cpx have the maximum Vp parallel to X, in the XZ plane and parallel to Y respectively. Destructive interference occurs between these minerals and hence P-wave anisotropy should be sensitive to the aggregate composition. For shear wave splitting (dVs) typical olivine and opx LPOs result in similar patterns with the maximum dVs in the YZ plane and the fast split shear wave (Vs1) polarized parallel to the foliation. A typical cpx LPO on the other hand produces destructive interference as the max dVs is close to X. By comparison with experiments and numerical simulations, it is estimated that upper mantle samples have an olivine LPO strength which recorded shear strain gamma of between 0.25 and 2.0. Pyrolite and piclogite models are compared with global transverse isotropic models. The slowly reducing P-wave anisotropy in the first 200 km can be explained by a model with constant composition and LPO strength. The sharp decrease in the observed anisotropy in the global models cannot be explained by the transformation of opx to cpx at 300 km, it is proposed that this decrease is due to a reduction in LPO strength from 200 to 350 km at the base of the lithosphere.
Earth's Deep Interior: Mineral Physics and Tomography From the Atomic Scale to the Global Scale

ISBN : 9780875909752
hal-01391524
http://hal.univ-reunion.fr/hal-01391524
http://hal.univ-reunion.fr/hal-01391524/document
http://hal.univ-reunion.fr/hal-01391524/file/Mainprice_AGUmonog_DM_GB_WBI_2000.pdf