Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Geomorphic landscape features have been suggested as indicators of forest diversity. However, their explanatory power has not yet been explicitly tested at a regional scale in tropical rainforest. We used forest inventories conducted according to a stratified sampling design (3,132 plots in 111 transects at 33 sites) and holistic multi-scale geomorphological mapping derived from a Shuttle Radar Topography Mission digital elevation model to describe and explain spatial patterns in floristic composition across French Guiana (80,000 km2). We measured and identified 123,906 trees with DBH C20 cm and used constrained and unconstrained ordinations to analyze variations in the abundance of 221 taxa and 51 families. Variance partitioning and variograms were used to detect spatial patterns in species composition, compare the explanatory power of spatial and environmentalfactors, and select the variables that best explain forest composition. Strong floristic patterns corresponded to a major latitudinal gradient and significant sub-regional floristic structure. Geomorphological landscapes shaped by historic climate fluctuations and major geological events successfully captured these patterns and explained the variation in abundance of 80 taxa, corresponding to 65 % of the inventoried trees. Our findings suggest that long-term forest dynamics are under substantial ‘‘geomorphographic control’’. A geomorphological perspective on landscapes that incorporates current and past environmental filters and historical biogeographical processes could thus be used more systematically in tropical regions for regional planning and forest conservation
ISSN: 0960-3115

hal-01204224
https://hal.archives-ouvertes.fr/hal-01204224
DOI : 10.1007/s10531-014-0854-8
PRODINRA : 295767

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The Pyrenees are again under the spotlights! Today, anincreasing number of research groups are focusing on thisapparently simple double-verging orogeny. These recent(and ongoing) studies using a broad range of disciplinaryapproaches have greatly improved our understanding ofthe geological structure and tectonostratigraphic evolutionof the Pyrenees and sometimes also challenged wellestablishedmodels.
ISSN: 1631-0713

insu-01312772
https://hal-insu.archives-ouvertes.fr/insu-01312772
DOI : 10.1016/j.crte.2016.04.002

Éditeur(s) : HAL CCSD
Résumé : International audience
Timor Island was at time considered as an example of "accretionary prism" linked to the collision between the Australian block and the Banda arc. However, its geological evolution is more complex. Five main superimposed structural units are distinguished in West Timor. The today structure is the result of three main tectonic events that occurred during the Late Oligocene, Late Early Pliocene and Late Pliocene-Early Pleistocene times, respectively. Our field investigations in the 1990 to 2000 decade completed with geochemical analyses and K-Ar datings (Jurassic and Miocene ages) of magmatism allow to precise the geodynamic evolution of Timor that can be summarized as follows: a first block was detached from Gondwana (unit 2) and drifted to the Asiatic margin until the Late Oligocene when it collided with the Asiatic active margin (unit 3). Then, the new block formed by both 2 and 3 units drifted to the south during the Miocene and the Early Pliocene until it collided with the Australian margin (ASM), by the Late Early Pliocene. Then, the Australian and Timor blocks moved together towards the North-North East during the Late Pliocene until they collided with the Banda fore-arc (unit 4). Later on (Pleistocene), Timor island was capped by the "autochthon" (unit 5) and then on (Quaternary?) by the Banda volcanic arc northward thrusted over the South Banda basin. Taking in consideration its close relationships with both the Australian plate and the Eurasian one. Timor may be considered as a key area for building this geodynamical scenario of Indonesia.
Bulletin Société Géologique de France

insu-00933548
https://hal-insu.archives-ouvertes.fr/insu-00933548
DOI : 10.2113/gssgfbull.184.6.569

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Deciphering Variscan versus Alpine history in the internal Rif system is a key to constraining the tectonic evolution of the Alboran domain and hence the geodynamics of the western Mediterranean system during the Cenozoic. This study focuses on the evolution of the metamorphic envelope of the Beni Bousera massif and its relation to the underlying peridotites. Combining structural geology, metamorphic petrology, and LA-ICP-MS U-Th-Pb dating of monazite, this study contributes to the understanding of the tectonic history of the western internal Rif. The regional foliation (S2) is characterized by LP/HT mineral assemblages and obliterates a former foliation (S1) developed along a barrovian (MP/MT) metamorphic gradient. The dating of some metamorphic monazite grains from a micaschist and a migmatitic gneiss demonstrates that the crustal envelope of the peridotite recorded two distinct tectonometamorphic episodes. Data from monazite inclusions in S1 garnet suggest that the first event, D1, is older than 250-170 Ma and likely related to the Variscan collision, in agreement with the barrovian type of the metamorphic gradient. The second event, D2, is Alpine in age (at circa 21 Ma) and corresponds to a strong lithosphere thinning allowing subsequent subcontinental mantle exhumation. Such a tectonic context provides an explanation for the LP/HT metamorphic gradient that is recorded in the regional foliation of the western Betic-Rif system. This extension is probably related to a subduction slab roll-back in the western end of the Mediterranean realm during the Oligo-Miocene times. No evidences for a Tertiary HP/LT metamorphism have been identified in the studied area
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
insu-01152517
https://hal-insu.archives-ouvertes.fr/insu-01152517
https://hal-insu.archives-ouvertes.fr/insu-01152517/document
https://hal-insu.archives-ouvertes.fr/insu-01152517/file/gueydan-2015.pdf
DOI : 10.1002/2014TC003769

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The mylonitic Cambrian quartzites, Moine Thrust Zone, NW Scotland, have long been used to study microstructural and petrofabric evolution and to develop understanding of grain-scale processes accommodating large-scale displacements. Today, structural geology is entering a new age of understanding of the basic processes involved in microstructural evolution due to the emergence of novel instrumental techniques and theoretical models. It seems apposite therefore to re-evaluate the microstructure of one example of this classic quartz mylonite from the Stack of Glencoul, Assynt, using arguably the most important of these new techniques, electron backscattered diffraction (EBSD). The three-dimensional (3D) microstructure and petrofabric of this rock was analysed using EBSD, to: 1) corroborate previous optical and X-ray texture goniometry measurements; 2) investigate the potential for sampling and/or tectonic sectioning bias that may be introduced inadvertently into any petrofabric analysis; and 3) predict its seismic properties. It is found that microstructures do differ between orthogonal structural sections, leading to variations in strengths of different components in the overall petrofabric that might impact on seismic properties. The results emphasize the true 3D nature of microstructures and petrofabrics, which can be recognized and accommodated more readily by this new generation of analytical techniques.
Continental Tectonics and Mountain Building: The Legacy of Peach and Horne

hal-00565749
https://hal.archives-ouvertes.fr/hal-00565749

Éditeur(s) : HAL CCSD Inter Research
Résumé : International audience
The main objective of the VULSACO (VULnerability of SAndy COasts to climate change and anthropic pressure) project was to investigate present day and potential future vulnerability of sandy coasts at the 2030 horizon, i.e. on a time scale related to climate variability. The method, based on a multidisciplinary approach bringing together geologists, geographers, physicists, social psychologists, engineers and stakeholders, was structured around 4 axes: field data analysis; numerical modelling; analysis of governance and stakeholder perceptions; and development of vulnerability indexes. This approach was designed to investigate vulnerability at a local scale and was applied to 4 contrasting beaches located in France: Sète Lido (Mediterranean Sea), Truc Vert and La Tresson beaches (Atlantic Ocean), and Dewulf (English Channel). The results focus on decadal and multi-annual beach trends at the Truc Vert beach site. There is almost no trend in beach volume at Truc Vert beach, although there is a variation in this parameter on a cycle of 2 to 3 yr, with variations related to wave energy and probably to indexes of climate variability. Numerical modelling identified the sensitivity of beach responses to changes in wave height and direction, especially in terms of subtidal morphology and the potential development of shoreline instability. Together with the observed offshore wave angle at the Biscay Buoy, these model results suggest that a potential change in wave angle due to climate variability could significantly modify the bars' morphology. The combination of data analysis and numerical modelling contributed to the development of vulnerability indexes designed for sandy coasts, which take into account climate-dependant variables such as waves. This allowed the differentiation of the sites in terms of vulnerability to erosion: Sète Lido and Truc Vert beach were the most and least vulnerable sites, respectively. These indexes help in identifying the dominant components of beach vulnerability, and provide potential for the study of how anthropogenic factors affect vulnerability. The study of stakeholder perceptions and decision-making with regard to climate-related risk also highlighted potential anthropogenic effects on beach vulnerability, and identified possible site-specific outcomes.
ISSN: 0936-577X

hal-00843946
https://hal-brgm.archives-ouvertes.fr/hal-00843946
DOI : 10.3354/cr01153

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : This paper presents the background for the calculation of physical properties of an aggregate from constituent crystal properties and the texture of the aggregate in a coherent manner. Emphasis is placed on the important tensor properties of 2nd and 4th rank with applications in rock deformation, structural geology, geodynamics and geophysics. We cover texture information that comes from pole figure diffraction and single orientation measurements (electron backscattered diffraction or EBSD, electron channelling pattern, Laue pattern, optical microscope universal-stage). In particular, we provide explicit formulae for the calculation of the averaged tensor from individual orientations or from an orientation distribution function (ODF). For the latter we consider numerical integration and an approach based on the expansion into spherical harmonics. This paper also serves as a reference paper for the mathematical tensor capabilities of the texture analysis software MTEX, which is a comprehensive, freely available MatLab toolbox that covers a wide range of problems in quantitative texture analysis, for example, ODF modelling, pole figure to ODF inversion, EBSD data analysis and grain detection. MTEX offers a programming interface which allows the processing of involved research problems as well as highly customizable visualization capabilities; MTEX is therefore ideal for presentations, publications and teaching demonstrations.
Deformation Mechanisms, Rheology and Tectonics: Microstructures, Mechanics and Anisotropy

hal-00688833
https://hal.archives-ouvertes.fr/hal-00688833

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To improve earthquake location, we create a 3-D a priori P-wave velocity model (3-DVM) that approximates the large velocity variations of the Ecuadorian subduction system. The 3-DVM is constructed from the integration of geophysical and geological data that depend on the structural geometry and velocity properties of the crust and the upper mantle. In addition, specific station selection is carried out to compensate for the high station density on the Andean Chain. 3-D synthetic experiments are then designed to evaluate the network capacity to recover the event position using only P arrivals and the MAXI technique. Three synthetic earthquake location experiments are proposed: (1) noise-free and (2) noisy arrivals used in the 3-DVM, and (3) noise-free arrivals used in a 1-DVM. Synthetic results indicate that, under the best conditions (exact arrival data set and 3-DVM), the spatiotemporal configuration of the Ecuadorian network can accurately locate 70 per cent of events in the frontal part of the subduction zone (average azimuthal gap is 289° ± 44°). Noisy P arrivals (up to ± 0.3 s) can accurately located 50 per cent of earthquakes. Processing earthquake location within a 1-DVM almost never allows accurate hypocentre position for offshore earthquakes (15 per cent), which highlights the role of using a 3-DVM in subduction zone. For the application to real data, the seismicity distribution from the 3-D-MAXI catalogue is also compared to the determinations obtained in a 1-D-layered VM. In addition to good-quality location uncertainties, the clustering and the depth distribution confirm the 3-D-MAXI catalogue reliability. The pattern of the seismicity distribution (a 13 yr record during the inter-seismic period of the seismic cycle) is compared to the pattern of rupture zone and asperity of the Mw = 7.9 1942 and the Mw = 7.7 1958 events (the Mw = 8.8 1906 asperity patch is not defined). We observe that the nucleation of 1942, 1958 and 1906 events coincides with areas of positive Simple Bouguer anomalies and areas where marine terraces are still preserved on the coastal morphology. From north to south: (1) the 1958 rupture zone is almost aseismic and is attributed to a zone of high coupling; (2) south of the Galera alignment (perpendicular to the trench), the 1942 rupture zone presents moderate seismicity, deeper on the seismogenic interplate zone, and abutting on the Jama cluster (to the south). This cluster is facing the Cabo Pasado cap and positive Bouguer anomalies on the overriding margin. We suspect that this cluster reflects a zone of local asperity (partial coupling). South of the Jama cluster, the spherical aseismic zone in the Bahia area is interpreted as having a low seismic coupling (steady creep motion or slow slip events). We suspect that the site that generated the three M > 7 events (1896, 1956 and 1998) correspond to a small patch of strong coupling. To the south, in the Manta-Puerto Lopez zone, the seismicity is mainly organized in earthquake swarms (1998, 2002, 2005). Although slow slip events have been observed in the area (Vallée et al. submitted), we infer from the coastline shape, the marine terraces and the high positive Bouguer anomalies that the seismicity here might reveal a significant amount of seismic coupling.
ISSN: 0956-540X

hal-00873478
https://hal.archives-ouvertes.fr/hal-00873478
DOI : 10.1093/gji/ggs083

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Carbonation of peridotite is a widespread process in nature, with emerging societal and environmental implications through geological storage of CO2. We studied the micro- and nano-scale structures associated with the carbonation of peridotite pervaded by a CO2-rich water and the induced changes of its hydrodynamic properties. Focused ion beam (FIB) nanotomography was coupled with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. An experimental sample of dunite core percolated by a CO2-rich fluid (pCO2 = 11 MPa) at 160 °C was compared with a naturally carbonated sample from the Atlantic Ridge (Exp. IODP 304). Results of the 8-days percolation experiment show continuous alteration of olivine into magnesite locally associated with a poorly crystalline serpentine-type mineral referred to as proto-serpentine. The experiment is also characterized by an overall decrease in rock porosity (from 7.7 to 6.4%) and permeability (from 8.5 × 10− 16 to 1.7 × 10− 16 m2). The primary inter-granular porosity (1 to 10 μm) is progressively filled with magnesite, leading to the overall decrease of permeability. At the same time, a secondary small-scale porosity (10 nm to 1 μm) is created at the tip of the dissolution features along the (010) cleavage planes of olivine grains. Carbonate crystals grow within these etch-pit structures behind the dissolution front. Dissolution and precipitation occur at a relative rate that maintains the secondary porosity over the timescale of the experiment (i.e. carbonate growth has to be the slowest one). This process is interpreted as an interface coupled dissolution-precipitation mechanism of olivine carbonation. Proto-serpentine is only formed in highly reduced flow areas, such as small olivine etch-pits (10 to 500 nm wide), which are more isolated from CO2 input. SEM-FIB analyses show the 3D preferential orientation of the dissolution-precipitation planes within a given olivine grain. It suggests the formation of lateral connections between the etch-pits (infra-micrometric “channels”) providing access to reactants and removing reaction products at the reaction sites. The experimental results show that olivine dissolution and magnesite precipitation converge to a quasi-steady state resulting in a constant carbonation rate controlled by reaction kinetics and not by mass transfer for this flow regime. The system self-regulates, independently of the porosity change at least during this incipient stage of olivine carbonation. Similar textures are observed in natural samples collected at 170 m-depth in the vicinity of veinlets driving late fluids down into the cooling oceanic lithosphere. This suggests that similar mechanisms are active in nature and can play an important role in the late, low temperature alteration stages of fractured peridotite. These results also highlight the critical role of nm-scale spatial arrangement of dissolution and precipitation features on mass transfers and on the sustainability of olivine carbonation through coupled dissolution-precipitation processes.
ISSN: 0009-2541

hal-01684733
https://hal.archives-ouvertes.fr/hal-01684733
DOI : 10.1016/j.chemgeo.2017.11.013

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The Alps/Apennines system, as well as many collisional orogens through the world, shows a finite deformation produced during a long geological history which involves numerous superimposed tectonic events. As a result, complex and often contrasted reconstructions for the setting and tectonics of the different stages of the growing and interfering Alps/Apennines system have been proposed. To enlight some of the geometric and kinematic signatures related to past geodynamics in the composite Alps(Corsica)/Apennines system, we analyse the major deformation processes, their superimposition, and resulting finite structural geometries in the currently growing Taiwan orogenic system. The Taiwan island and its offshore northward and southward prolongations represent the emerged and the sub-marine parts of an orogenic wedge related to the interactions between the Eurasian and the Philippine Sea and recording different subduction settings. Using the Taiwan actualistic geodynamic scenarios and the related first-order geometric-kinematic constraints, we will attempt a reconstruction of the tectonic evolution for the Corsica/Apennines orogenic system foregrounding the key role of continental subduction and subduction reversal during such evolution.
ISSN: 1437-3254

hal-00617149
https://hal.archives-ouvertes.fr/hal-00617149
DOI : 10.1007/s00531-010-0598-y

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic anisotropy of the south Iberian upper mantle is investigated using shear-wave splitting of SKS phases. We analyzed teleseismic events recorded by sixteen permanent broadband stations installed on the southern Iberian Peninsula and in northern Africa, and we determined fast polarization directions phi, and delay times delta t between fast and slow components. The area of investigation extends across two important geological structures in the Variscan Iberian Peninsula: the Variscan Iberian Massif in its center, and the Gibraltar arc in the Southeast, that represents the most westerly Alpine belt in the western Mediterranean. Shear-wave splitting measurements from stations in the Betic domain show homogeneous ENE-WSW fast directions nearly parallel to the trend of the mountain belt, and smooth spatial variations. Stations in the North, toward the southern part of the Variscan Iberian Massif show homogeneous fast directions however trending NS to NE-SW, different from those recorded in the Betic. These observations may reflect a post-Hercynian (Variscan) deformation of the Ossa-Morena zone, related to the main stages in the tectonic evolution of this part, namely transpressional stage, transtensional stage and shortening episode, or a deformation related to the posterior Alpine orogeny. Along the Gibraltar arc, we observe a smoothly varying phi trend changing from ENE-WSW in the Eastern Betics to NS in the area of Gibraltar and Ceuta, following more or less the general trend of the mountain belt around the Alboran Sea, and the coastline. Since a similar rotation is also visible in results from Pn anisotropy, this suggests that the anisotropy is vertically coherent starting from just below the Moho. Comparing the anisotropy pattern expected from various geodynamic models with the observed SKS splitting suggests that the anisotropy is best explained by a model of slab rollback, rather than by delamination models.
ISSN: 0012-821X

hal-00412175
https://hal.archives-ouvertes.fr/hal-00412175
https://hal.archives-ouvertes.fr/hal-00412175/document
https://hal.archives-ouvertes.fr/hal-00412175/file/Buontempo_SKS_gibraltar_EPSL2008_hal.pdf
DOI : 10.1016/j.epsl.2008.06.024

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In order to reveal the structural properties at small scale within a geological unit apparently homogeneous at large scale, we explore the stochastic components of petrophysical measurements recorded in a borehole drilled through the Cretaceous siliclastic units of the South-eastern Basin of France. First, we analyse the instantaneous fluctuations of gamma ray log measurements searching for scaling laws in its power spectrum. Power spectra indicate a scaling behaviour with average exponent beta a values mostly falling in the range 1
ISSN: 0920-4105

hal-00496425
https://hal.archives-ouvertes.fr/hal-00496425
DOI : 10.1016/j.petrol.2009.11.001

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : The Fars arc accommodates the oblique convergence between the Arabic plate and the Iran block. Many geological observations suggest block rotations from regional to local scales. We present palaeomagnetic investigations in the Fars arc and its eastern termination, the Zagros-Makran syntaxis. Sixty-four sites have been sampled covering the Palaeocene Pabdeh Fm. to Mio-Pliocene Agha-Jhari Fm., the latest being the most sampled formation. We document pre-tilting components in all formations. However, coarse fractions of Agha-Jhari clastics formation retain a post-tilting remagnetization. As a whole, block rotations rarely exceed 20 degrees. In the western Fars arc, clockwise and counter-clockwise rotations of small amplitudes are consistent with the torsions observed near the strike slip Kazerun and Mangarak faults. In the Zagros Makran syntaxis, counter-clockwise and clockwise rotations are observed, respectively, in the western and eastern part. This pattern is consistent with an amplification of the shape of the syntaxis. Between Zagros and Makran, palaeomagnetic data support that the present-day arcuate shape of the arc is secondary. We assume that most of the block rotations took place during the Plio-Pleistocene, during a blocking stage of the Zagros-Makran syntaxis. We emphasize the role of Oman Peninsula which plays as an indenter for the propagation of the Fars thrust belt.
ISSN: 0956-540X

hal-00411142
https://hal.archives-ouvertes.fr/hal-00411142
DOI : 10.1111/j.1365-246X.2008.03732.x

Éditeur(s) : HAL CCSD
Résumé : International audience
Sedimentary basins, through the sedimentary successions and the nature of the deposits, reflect the geology of thearea from which the sediments were derived and thus provide valuable record of hinterland tectonism. As the collisionbetween the South China and the Indochina blocks (i.e. the Indosinian orogeny) is still the object of a numberof controversies regarding, for instance, its timing and the polarity of the subduction, the sedimentary basins associatedwith this mountain belt are likely to provide clues to reconstruct its geodynamic evolution. However, boththe Sam Nua Basin (located to the south of the inner zones of the Indosinian orogeny and the Song Ma ophiolites)and the Song Da Basin (located to the north of the inner zones), northern Vietnam, are still lacking importantinformation regarding the depositional environments and the ages of the main formations that they contain.Using sedimentological and dating analyses (foraminifers biostratigraphy and U-Pb dating on detrital zircon), weprovide a new stratigraphic framework for these basins and propose a geodynamic evolution of the present-daynorthern Vietnam.During the Early Triassic, the Sam Nua Basin was mainly supplied by volcaniclastic sediments originating froman active volcanic activity. Geochemical investigations, combined with sedimentological and structural analyses,support an arc-related setting for this magmatism. This magmatic arc resulted from the subduction of a south dippingoceanic slab that once separated the South China from the Indochina blocks. During the Middle to the LateTriassic, the Sam Nua Basin underwent erosion that lead to the formation of a major unconformity, termed theIndosinian unconformity. This unconformity is interpreted to result from the erosion of the Indosinian mountainbelt, built after the continental collision between the South China and the Indochina blocks. Later, during the LateTriassic, the Sam Nua Basin experienced the deposition of very coarse material, emplaced under continental settingand representing the product of the erosion of the Indosinian mountain belt.To the North, the Song Da Basin is characterized by strongly diachronous deposits over a basal unconformitydeveloped at the expense of volcanic and volcaniclastic deposits related to the Emeishan Large Igneous Province.The sedimentary succession indicates a foreland setting during the Early to the Middle Triassic, which contrastswith the commonly assumed rift setting for these sediments. Thus, the Song Da Basin documents the formation ofthe Indosinian thrust belt, located immediately to the South of the basin.
European Geosciences Union General Assembly 2017
Vienne, Austria

insu-01510331
https://hal-insu.archives-ouvertes.fr/insu-01510331

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Some major challenges for geophysicists and structural geologists using three-dimensional boundary element method codes (3D-BEM) are: (1) reducing the amount of memory required to solve large and dense systems and (2) incorporation of inequality constraints such as traction inequality constraints (TIC) and displacement inequality constraints (DIC). The latter serves two purposes. First, for example, inequality constraints can be used to simulate frictional slip (using TIC). Second, these constraints can prevent element interpenetration while allowing opening mode (using DIC). We have developed a method that simultaneously incorporates both types of functionality of the inequality constraints. We show that the use of an appropriate iterative solver not only avoids the allocation of significant memory for solving the system (allowing very large model computation and simplifying parallelization on multi-core processors), but also admits interesting features such as natural incorporation of TICs and DICs. Compared to other techniques of contact management (e.g., Lagrange multipliers, penalty method, or complementarity problem), this new simple methodology, which does not use any incremental trial-and-error procedures, brings more flexibility, while making the system more stable and less subject to round-off errors without any computational overhead. We provide validations and comparisons of the inequality constraints implementation using 2D analytical and numerical solutions.
ISSN: 1420-0597

hal-00561035
https://hal.archives-ouvertes.fr/hal-00561035
DOI : 10.1007/s10596-009-9170-x

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : During the past decade, the objective of the Task Force Sedimentary Basins of the International Lithosphere Program (ILP) has been the encouragement of the dialogue among researchers studying the basin fill and the whole lithospheric structure. The ILP 2013 annual meeting of the Task Force Sedimentary Basin held in Marseille (October 14–18th) was aimed at reviewing the current research on the possible links between deep and shallow processes in the Mediterranean region. More than a hundred scientists from academy and industry attended the conference, which involved a two day-long field trip to the Pyrenean and Alpine Forelands of Provence. Research areas represented at the 2013 ILP annual meeting included all disciplines pertaining to geology, geophysics …
ISSN: 0037-9409

hal-01218405
https://hal.archives-ouvertes.fr/hal-01218405
DOI : 10.2113/gssgfbull.186.4-5.207