Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present the 1998-2009 GPS-derived velocity field for the Armenia region based on a survey-mode observation network of 31 GPS sites.We combine our results with previous GPS studies of the region to better assess the deformation of the Lesser Caucasus and Kura basin region. The results show that the Kura basin and the Lesser Caucasus regions are two different blocks, and that the main fault (Pambak-Sevan-Sunik) between these two regions has a right-lateral slip rate of 2±1 mm/yr. This is consistentwithmorphotectonic estimates and suggests a fairly constant slip rate over the last 120-300 ka. The right-lateral slip rate on one of the southern branch of the Pambak-Sevan-Sunik fault is lower than 1 mm/yr and the good agreementwith a geologically estimated slip rate suggests a constant slip rate over the last 1.4 Myr. The Sardarapat and Akhurian faults experience some shortening. This shortening is consistentwith someindependent geological estimates and shows the Arabian push.However, NNW-SSE-orientated faults have an extensional fault normal component instead of the expected shortening due to the Arabia-Eurasia convergence. This substantial extensive strain, and the sharp azimuth change of the velocity vectors between the Arabia promontory and the Lesser Caucasus suggest that processes other than "extrusion", possibly related to old subduction or delamination, contribute to the geodynamics of the region.
ISSN: 0040-1951

hal-00812623
https://hal.archives-ouvertes.fr/hal-00812623
DOI : 10.1016/j.tecto.2013.02.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Past studies have shown that high coastal uplift rates are restricted to active areas, especially in a subduction context. The origin of coastal uplift in subduction zones, however, has not yet been globally investigated. Quaternary shorelines correlated to the last interglacial maximum (MIS 5e) were defined as a global tectonic benchmark (Pedoja et al. (2011)). In order to investigate the relationships between the vertical motion and the subduction dynamic parameters, we cross-linked this coastal uplift database with the "geodynamical" databases from Heuret (2005), Conrad and Husson (2009) and Müller et al. (2008). Our statistical study shows that: [1] the most intuitive parameters one can think responsible for coastal uplift (e.g., subduction obliquity, trench motion, oceanic crust age, interplate friction and force, convergence variation, dynamic topography, overriding and subducted plate velocity) are not related with the uplift (and its magnitude); [2] the only intuitive parameter is the distance to the trench which shows in specific areas a decrease from the trench up to a distance of ~300 km; [3] the slab dip (especially the deep slab dip), the position along the trench and the overriding plate tectonic regime are correlated with the coastal uplift, probably reflecting transient changes in subduction parameters. Finally we conclude that the first order parameter explaining coastal uplift is small-scale heterogeneities of the subducting plate, as for instance subducting aseismic ridges. The influence of large-scale geodynamic setting of subduction zones is secondary.
ISSN: 0264-3707

hal-00968538
https://hal.archives-ouvertes.fr/hal-00968538
https://hal.archives-ouvertes.fr/hal-00968538/document
https://hal.archives-ouvertes.fr/hal-00968538/file/henryterraces_v2.pdf
DOI : 10.1016/j.jog.2014.04.001

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
A network of 26 GPS sites was implemented in Iran and Northern Oman to measure displacements in this part of the Arabia–Eurasia collision zone. We present the GPS velocity field obtained from three surveys performed in 1999 September, 2001 October and 2005 September and the deduced strain tensor. This study refines previous studies inferred from only the two first surveys. Improvements are significant in NE Iran. The present-day shortening rate across the mountain belts of NE Iran is estimated to 5 ± 1 mm yr−1 at about N11°, 2 ± 1 mm yr−1 of NS shortening across the eastern Kopet Dag and 3 ± 1 mm yr−1 of NS shortening across Binalud and Kuh-e-Sorkh. Our GPS measurements emphasize the varying character of the Kopet Dag deformation between its southeastern part with prevailing thrusting at low rates and its northwestern part with dominant strike-slip activity at increasing rates. The principal axes of the horizontal strain tensor appears very homogeneous from the Zagros to the Alborz and the Kopet-Dag (N20°) and in eastern Iran (Makran and Lut block: N30°). Only NW Iran suffers a variable strain pattern which seems to wrap the Caspian basin. The strain tensor map underlines the existence of large homogeneous tectonic provinces in terms of style and amplitude of the deformation.
ISSN: 0956-540X

insu-00346744
https://hal-insu.archives-ouvertes.fr/insu-00346744
DOI : 10.1111/j.1365-246X.2007.03477.x

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : The seismology is the most effective method to explore the Structure of subduction zones to great depth. The distinguishing feature of the mantle in the subduction regions is the presence of hydrated phases, which transport water into the Earth's interior and release it with dramatic local consequences, triggering earthquakes and melting. The seismological detection of these hydrous phases and geo-dynamic interpretation of flow in the hydrous mantle depend on knowledge of the anisotropic elastic properties and the characteristics of the wave propagation in anisotropic media. In this paper we briefly recall the distinguishing features of anisotropic wave propagation and the observable parameters. We suggest the Vp/Vs ratio is a physically sound parameter than can be observed by seismology in anisotropic regions of the Earth, whereas the Poisson's ratio, which is often quoted, is not directly observable and does not correspond to the characteristics of wave propagation in an anisotropic or isotropic medium. We report for the first time the ratios of Vp/Vs1 and Vp/Vs2, where Vs1 is the fastest and Vs2 slowest S-wave velocities of an anisotropic media. We present the current knowledge of the anisotropic seismic properties of hydrous minerals in the upper mantle, transition zone, and lower mantle that are stable along low temperature geotherms associated with subduction, and identify which minerals are likely to influence seismological observations because they have very high volume fractions, or very high anisotropies, or both of these.;In the upper mantle antigorite and talc are exceptionally anisotropic (Vp 71% Vs 68% and Vp 65%, Vs 68%, respectively) and chlorite is also very anisotropic for S-waves (Vp 35%, Vs 76%). Comparatively less anisotropic are hornblende (Vp 27%, Vs 31%), used as proxy for tremolite in subduction zones, and clinohumite (21.8%, Vs 15.9%). Brucite at 4 GPa (Vp 26.5%, Vs 30.9%) and the dense hydrogen magnesium silicate (DHMS) phase A at 9GPa (Vp 9.3%, Vs 17.6%) are the only hydrous minerals stable in the upper mantle that have had their elastic properties measured at in situ mantle pressures. Except for the phase A, all these minerals are more anisotropic than olivine for at least one parameter (Vp, Vs, Vp/Vs1, or Vp/Vs2). In the transition zone the major phases hydrous wadsleyite and ringwoodite C have moderate to weak anisotropies (Vp 16.3%, Vs 16.5%, and Vp 1.9%, Vs 4.4%, respectively). The DHMS Superhydrous B has a moderate anisotropy (Vp 6.9%, Vs 11.6%). At greater depth the DHMS phase D Lit 24 GPa (Vp 10.8%, Vs 18.0%) is the only hydrous phase that can transport hydrogen from the transition zone into the lower mantle. The phase D is more anisotropic for S than P waves like many of the hydrous phases. From these data it is clear that hydrous phases are in general very anisotropic. However, pressure can play a strong role in reducing anisotropy. It is the case for brucite and talc, in which increasing pressure from ambient to 4 GPa reduces the anisotropy by about 50% for both P and S waves. In contrast, the anisotropy of the DHMS phase A does not change significantly with pressure.;Our picture of the seismic anisotropy of hydrated minerals remains incomplete; the elastic properties of many have not been measured even at ambient conditions (e.g., 10 angstrom phase and phase E) or not measured in their true elastic symmetry (e.g., clinochlore). The majority of hydrous minerals have not been measured at high pressure. and none related to hydrated mantle have been measured at elevated temperature. We have shown in the few cases where hydrous minerals have been measured as a function of pressure, that this variable has an important effect oil the velocity distribution and in most cases reduces the degree of anisotropy, hence we Would expect seismic anisotropy to play a key role in the determination of the shallow structure of subduction zones in the upper mantle.
Subduction zone geodynamics

hal-00420893
https://hal.archives-ouvertes.fr/hal-00420893

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A dense, local network of 30 geodetic markers covering a 50 × 60 km2 area in the southwestern European Alps (Briançon region) has been temporarily surveyed in 1996, 2006 and 2011 by GPS. The aim is to measure the current deformation in this seismically active area. The study zone is characterized by a majority of extensional and dextral focal mechanisms, along north–south to N160 oriented faults. The combined analysis of the three measurement campaigns over 15 years and up to 16 years of permanent GPS data from the French RENAG network now enables to assess horizontal velocities below 1 mm/year within the local network. The long observation interval and the redundancy of the dense campaign network measurement help to constrain a significant local deformation pattern in the Briançon region, yielding an average E–W extension of 16 ± 11 nanostrain/year. We compare the geodetic deformation field to the seismic deformation rate cumulated over 37 years, and obtain good coherencies both in amplitude and direction. Moreover, the horizontal deformation localized in the Briançon region represents a major part of the Adriatic-European relative plate motion. However, the average uplift of the network in an extensional setting needs the presence of buoyancy forces in addition to plate tectonics.
ISSN: 0264-3707

hal-01119724
https://hal.archives-ouvertes.fr/hal-01119724
DOI : 10.1016/j.jog.2015.02.001

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Iran is an active continental domain accommodating the convergence between the Arabia and Eurasia plates. In northwestern Iran, deformation between the Central Iranian block and the Caucasus domain is mainly accommodated by right lateral strike-slip on the Tabriz fault. Cities and villages, including the city of Tabriz, have been destroyed by several strong historical earthquakes (M similar to 7). In this study, we compare the slip-rates estimated from geodetic measurements (radar interferometry and UPS) with those determined by dating a geomorphological offset of an alluvial fan along the Tabriz fault. The GPS measurements along two profiles normal to the Tabriz fault suggest a slip-rate of 7.3 +/- 1.3 mm yr(-1). The persistent scatterer radar interferometry analysis of Envisat satellite archives from 2003 to 2010 shows a velocity gradient (6 +/- 3 mm yr(-1)) across the Tabriz fault in agreement with GPS results. Moreover, it reveals that most of the area located south of the Tabriz fault is affected by subsidence, and that some sections of the fault probably act as barriers to fluid migration which may have an impact on its mechanical behaviour. West of Tabriz morphotectonic investigations on an alluvial fan surface show a right-lateral cumulative offset of 320 +/- 40 m Luminescence analyses of the coarse matrix alluvial fan deposits provide an age of 46 +/- 3 ka. This yields a slip-rate comprised between 6.5 and 7.3 mm yr(-1) along this segment. These results suggest that the Late Quaternary slip-rate is in agreement with the present-day slip-rate estimated by geodetic measurements, showing no slip-rate changes during the past 45 000 yr. Short-term variations within the 45 000 yr related to temporal earthquake clustering over few seismic cycles cannot be ruled out, but if they exist, they do not affect the geodetic and the geomorphological estimates. This study is in agreement with previous ones suggesting that long-term slip-rates (i.e. averaged over several tens of seismic cycles) are consistent with geodetic estimated slip-rates (i.e. extrapolated from few years of interseismic observations), and suggests that perturbations of fault slip-rates are related to variations over few seismic cycles.
ISSN: 0956-540X

hal-00844695
https://hal.archives-ouvertes.fr/hal-00844695
https://hal.archives-ouvertes.fr/hal-00844695v2/document
https://hal.archives-ouvertes.fr/hal-00844695/file/rizza2013.pdf
DOI : 10.1093/gji/ggt041

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use 3-D mechanical modeling representing faults as planar surfaces with frictional properties that obey Coulomb-failure process to explore the long-term slip rates of the Altyn Tagh fault and Kunlun faults in the north Tibetan plateau. Crustal theology is simplified as an elastoplastic upper crust and a viscoelastic lower crust. Far-field GPS velocities and late Quaternary fault slip rates are used to constrain the model results. Rheological tests show that effective fault friction lower than 0.1-0.08 leads to high slip rates that fit with geologically and geodetically determined slip rates of the Kunlun fault (10-11.7 +/- 1.5 mm/yr). Meanwhile, the modeled Altyn Tagh fault reaches slip rates similar to 13.7 mm/yr to similar to 7.8 mm/yr in its central portion, between ranges of the geological slip rates. Associated with high slip rates, our model predicts that central Tibet (similar to 84 degrees E-95 degrees E) from the Altyn Tagh fault to the north of the Himalayan arc accommodates north-south shortening and east-west extension rates of similar to 10-12 mm/yr and similar to 8-10 mm/yr, respectively. We also question the widely accepted idea that interseismic strain is driven at the base of the seismogenic zone by a screw dislocation. If this assumption fails, the presented model implies that interseismic strain around large strike-slip faults could be distributed in a much broader way if the lithosphere deforms as a thin elastic plate rather than an elastic half-space with an embedded dislocation. If this distributed deformation is ignored, and the instantaneous surface deformation field modeled as that resulting from slip on a dislocation below a specified depth embedded in an elastic half-space, the estimated slip rate will inevitably be lower than the true long-term slip rate. This appears to explain why geodetic slip rates proposed for the Altyn Tagh fault (510 mm/yr) are lower than some of the geological slip rates. (C) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00411926
https://hal.archives-ouvertes.fr/hal-00411926
DOI : 10.1016/j.epsl.2008.06.049

Éditeur(s) : HAL CCSD
Résumé : In SW Yukon – SE Alaska, the boundary between the Pacific and North America plates is characterized by a syntaxis at the transition between the Aleutian subduction to the W and the Fairweather – Queen Charlotte strike-slip faults to the SE. The relative motion is oblique to the main fault structures, and the area is marked by the Yakutat block collision. From the Chugach – Saint Elias mountains in the plate boundary zone (up to 6 000 m high) to the intraplate strike-slip faults, markers of the present-day deformation give information on its partition in the system.During my PhD, I first measure surface deformation using a dense GPS network, deployed up to 500 km inland the North America plate. After precise processing and corrections of transient effects in the area (postseismic and glacial isostatic rebound), a new residual velocity field is produced for the syntaxis area, from which I derive strain rates. Those data allow me to quantify the fault slip rates for Fairweather and southern Denali strike-slip faults, and to characterize a bi-modal deformation pattern: Along the plate boundary, the deformation is localized on large-scale structures (accretionary prism to the W, Fairweather to the E); In the syntaxis area, strain rates are the highest and the GPS data shows a diffuse intraplate deformation, similar to an indentor pattern. The Yakutat block seems to strongly drive the North America plate deformation.This indentor pattern induces strong lateral variations on the large intraplate faults: the Denali – Totschunda – Duke River system. In a second part, I realize a regional geomorphological study to characterize the role and slip rate of those faults. From very high-resolution Digital Elevation Models (~ 1 m), a detailed cartography is done. On the basis of fieldwork observations, I measure offsets of fluvial and glacial markers, which are sampled for dating. A dextral cumulative deformation is highlighted on the northern Denali Fault, where as all southern Denali is marked by vertical deformation. This study allows me to quantify new slip rates for the system Denali – Totschunda – Duke River, and to show the leading role of the Totschunda (~ 14 mm/a) and Duke River (~ 6 mm/a) faults, contrary to the Denali Fault (~ 1 mm/a) North of the syntaxis.The new tectonic model for the Yakutat collision provides an important case study for the understanding of indentor systems. The concomitance of a rigid-block deformation (to the West) and diffuse deformation (to the East), as well as the near-zero slip rate on the lithospheric-scale southern Denali Fault highlight the major control of boundary conditions and the structural heritage on the orogen deformation.
Au SO Yukon – SE Alaska, la frontière entre les plaques Pacifique et Nord-Amérique est marquée par une syntaxe à la transition entre la subduction des Aléoutiennes à l’O et le décrochement de Fairweather – Queen Charlotte au SE. Le mouvement relatif est oblique et la région est marquée par la collision du bloc Yakutat. De la chaine des Chugach – Saint Elias en frontière de plaque (jusqu’à 6 000 m d’altitude) aux grands décrochements intraplaque, les marqueurs de la déformation actuelle apportent des informations sur sa partition dans ce système.Au cours de cette thèse, je m’intéresse dans un premier temps à mesurer la déformation de surface à l’aide d’un réseau GPS dense, déployé jusqu’à 500 km à l’intérieur de la plaque Nord-Amérique. Après un travail minutieux de traitement des données et de correction des effets transitoires (rebond post-glaciaire et post-sismique), un champ de vitesses résiduelles robuste et inédit est produit au niveau de la syntaxe, dont je dérive des taux de déformation. Ces données me permettent de quantifier les vitesses de glissement les failles décrochantes de Fairweather et Denali au Sud, et également de caractériser une déformation bimodale : En frontière de plaques, la déformation est localisée sur les grandes structures (prisme d’accrétion à l’O, Fairweather à l’E) ; Au niveau de la syntaxe, les taux de déformation sont les plus importants et les données GPS mettent en évidence une déformation intraplaque diffuse, similaire à un champ attendu à l’aplomb d’un indenteur. Le bloc Yakutat semble donc contrôler fortement la déformation de la plaque Nord-Amérique.Ce champ de déformation induit des variations latérales fortes sur les grandes failles intraplaque : le système Denali-Totschunda-Duke River. Dans une seconde partie, je réalise une étude géomorphologique régionale pour caractériser le rôle et la vitesse de ces failles. À partir de Modèles Numériques de Terrain très haute résolution (~ 1 m), une cartographie de détail est réalisée. Puis une mission de terrain me permet de mesurer des décalages sur des marqueurs fluviatiles et glaciaires et collecter des échantillons pour les dater. Je mets en évidence une déformation cumulée dextre sur le segment Nord de la faille de Denali, alors que toute la partie Sud déforme verticalement la surface. Cette étude me permet de quantifier de nouvelles vitesses de failles sur le système Denali-Totschunda-Duke River, et de montrer le rôle prépondérant des failles de Totschunda (~ 14 mm/a) et Duke River (~ 6 mm/a) contrairement à la faille de Denali (~ 1 mm/a) au Nord de la syntaxe.Le nouveau modèle cinématique proposé pour la région de collision Yakutat permet d’apporter un nouvel exemple à la compréhension des systèmes d’indenteur. La concomitance d’une déformation de blocs (à l’Ouest) et diffuse (à l’Est), ainsi que l’absence de déformation sur la faille lithosphérique de Denali Sud met en évidence le contrôle majeur des conditions aux limites et de l’héritage structural dans la déformation des orogènes.
https://hal.archives-ouvertes.fr/tel-01241688

tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688/document
https://hal.archives-ouvertes.fr/tel-01241688/file/manuscrit_anais_v2_optimise.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We analyze in this study a new set of marine data including 3D local tomography, 1992-2008 relocated earthquakes and two recent multichannel seismic lines to characterize the deformation style in the collision area offshore east Taiwan. We have mapped in detail the Mohos of the converging plates as well as the subduction interface with a resolution never reached before. We show that the sharp continental subduction of the Eurasia plate, beneath the middle part of the Central Range, indents the Philippine Sea plate (PSP) as attested by intra-oceanic slicing and incipient subduction of the PSP beneath the east coast of Taiwan. The westernmost part of the PSP slab is probably experiencing a beginning of break-off as attested by NW-trending en-échelon shear zones beneath the southern slope of the southern Ryukyu arc (SRA). These en-échelon shear zones have a sinistral component favored by the "collision-free" subduction of the PSP north of 24°30′N. The down-faulting of the subduction interface forms ramps along which earthquakes clusterize. Three M7 subduction earthquakes occurred offshore Suao city along these ramps with a recurrence interval of about 40 years: 1920 Mw7.7, 1963 Mw7.2 and 2002 Mw7.1 events. The 1966 Mw6.0-7.5 earthquakes sequence likely outlines a WNW-ESE left-lateral intra-slab shear zone. The SRA upper plate accommodates the complex geometry and deformation of the subducting PSP through seismic deformation. Shallow high velocities fringing the Luzon volcanic arc (LVA) beneath the Longitudinal Valley and north of the southernmost Ryukyu forearc basins are interpreted as relics of the LVA forearc basement squeezed in the collision zone. Based on the accommodation of a large part of the convergence through shortening within the PSP and the subsequent segmentation of the shallow subduction interface, we consider that the nucleation of a Mw ≥ 8 earthquake along the southernmost Ryukyu megathrust is unlikely.
ISSN: 0040-1951

hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365/document
https://hal.archives-ouvertes.fr/hal-00853365/file/publallemandifremer.pdf
DOI : 10.1016/j.tecto.2013.03.020

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The northern Canadian Cordillera (NCC) is an active orogenic belt in northwestern Canada characterized by deformed autochtonous and allochtonous structures that were emplaced in successive episodes of convergence since the Late Cretaceous. Seismicity and crustal deformation are concentrated along corridors located far (>200 to ~800 km) from the convergent plate margin. Proposed geodynamic models require information on crust and mantle structure and strain history, which are poorly constrained. We calculate receiver functions using 66 broadband seismic stations within and around the NCC and process them to estimate Moho depth and P-to-S velocity ratio (Vp/Vs) of the Cordilleran crust. We also perform a harmonic decomposition to determine the anisotropy of the subsurface layers. From these results, we construct simple seismic velocity models at selected stations and simulate receiver function data to constrain crust and uppermost mantle structure and anisotropy. Our results indicate a relatively flat and sharp Moho at 32 ± 2 km depth and crustal Vp/Vs of 1.75 ± 0.05. Seismic anisotropy is pervasive in the upper crust and within a thin (~10–15 km thick) sub-Moho layer. The modeled plunging slow axis of hexagonal symmetry of the upper crustal anisotropic layer may reflect the presence of fractures or mica-rich mylonites. The subhorizontal fast axis of hexagonal anisotropy within the sub-Moho layer is generally consistent with the SE-NW orientation of large-scale tectonic structures. These results allow us to revise the geodynamic models proposed to explain active deformation within the NCC.
ISSN: 2169-9313

Droits : info:eu-repo/semantics/OpenAccess
hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550/document
https://hal.archives-ouvertes.fr/hal-01685550/file/Tarayoun_et_al-2017-Journalsur Geophysical_Research__Solid_Earth.pdf
DOI : 10.1002/2017JB014284

Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : International audience
This paper presents a synthetic view of the geodynamic evolution of the Zagros orogen within the frame of the Arabia-Eurasia collision. The Zagros orogen and the Iranian plateau preserve a record of the long-standing convergence history between Eurasia and Arabia across the Neo-Tethys, from subduction/obduction processes to present-day collision (from ~ 150 to 0 Ma). We herein combine the results obtained on several geodynamic issues, namely the location of the oceanic suture zone, the age of oceanic closure and collision, the magmatic and geochemical evolution of the Eurasian upper plate during convergence (as testified by the successive Sanandaj-Sirjan, Kermanshah and Urumieh-Dokhtar magmatic arcs), the P-T-t history of the few Zagros blueschists, the convergence characteristics across the Neo-Tethys (kinematic velocities, tomographic constraints, subduction zones and obduction processes), together with a survey of recent results gathered by others. We provide lithospheric-scale reconstructions of the Zagros orogen from ~ 150 to 0 Ma across two SW-NE transects. The evolution of the Zagros orogen is also compared to those of the nearby Turkish and Himalayan orogens. In our geotectonic scenario for the Zagros convergence, we outline three main periods/regimes: (1) the Mid to Late Cretaceous (115-85 Ma) corresponds to a distinctive period of perturbation of subduction processes and interplate mechanical coupling marked by blueschist exhumation and upper-plate fragmentation, (2) the Paleocene-Eocene (60-40 Ma) witnesses slab break-off, major shifts in arc magmatism and distributed extension within the upper plate, and (3) from the Oligocene onwards (~ 30-0 Ma), collision develops with a progressive SW migration of deformation and topographic build-up (Sanandaj-Sirjan Zone: 20-15 Ma, High Zagros: ~12-8 Ma; Simply Folded Belt: 5-0 Ma) and with partial slab tear at depths (~10 Ma to present). Our reconstructions underline the key role played by subduction throughout the whole convergence history. We finally stress that such a long-lasting subduction system with changing boundary conditions also makes the Zagros orogen an ideal natural laboratory for subduction processes.
ISSN: 0016-7568

insu-00616582
https://hal-insu.archives-ouvertes.fr/insu-00616582
https://hal-insu.archives-ouvertes.fr/insu-00616582/document
https://hal-insu.archives-ouvertes.fr/insu-00616582/file/692.full.pdf
DOI : 10.1017/S001675681100046X

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : We present a regional surface waveform tomography of the Pacific upper mantle, obtained using an automated multimode surface waveform inversion technique on fundamental and higher mode Rayleigh waves, to constrain the VSV structure down to ∼400 km depth. We have improved on previous implementations of this technique by robustly accounting for the effects of uncertainties in earthquake source parameters in the tomographic inversion. We have furthermore improved path coverage in the South Pacific region by including Rayleigh wave observations from the French Polynesian Pacific Lithosphere and Upper Mantle Experiment deployment. This improvement has led to imaging of vertical low-velocity structures associated with hotspots within the South Pacific Super-Swell region. We have produced an age-dependent averagecross-sectionforthePacificOceanlithosphereandfoundthattheincreaseinVSV with age is broadly compatible with a half-space cooling model of oceanic lithosphere formation. We cannot confirm evidence for a Pacific-wide reheating event. Our synthetic tests show that detailed interpretation of average VSV trends across the Pacific Ocean may be misleading unless lateral resolution and amplitude recovery are uniform across the region, a condition that is difficult to achieve in such a large oceanic basin with current seismic stations.
ISSN: 0956-540X

hal-00105949
https://hal.archives-ouvertes.fr/hal-00105949
https://hal.archives-ouvertes.fr/hal-00105949/document
https://hal.archives-ouvertes.fr/hal-00105949/file/Maggi_Pacif_tomo_GJI2006.pdf
DOI : 10.1111/j.1365-246X.2006.03037.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Imaging deep active volcanic areas remains a challenge in our understanding of their activity and evolution, especially in subduction zones. Study of magnetic anomalies is appropriate to access such dynamics in depth. The magnetic anomaly pattern of the Lesser Antilles Arc (LAA) subduction is studied through Curie Point Depth (CPD), interpreted as the depth of the 580 °C isotherm, and developed to better assess the deep thermal structure of the arc. The depth of the estimated CPD exhibits a complex topography. Keeping in mind the overall uncertainty associated with this method, a main doming is evidenced below the Guadeloupe archipelago. Its apex is shifted towards the ancient arc, suggesting a very hot state of the fore-arc/arc domain. To better understand the LAA thermal state, we perform 2D thermo-mechanical simulations of the subduction zone. Recalling that magnetite is a serpentinization by-product, we simulate water transfer triggered by slab dehydration to test the assumption of fore-arc serpentinization suggested by the positive magnetic anomaly in the vicinity of the Guadeloupe archipelago. In this area, the subduction-induced arc lithosphere hydration and related weakening trigger a fast heating of the upper plate by basal convective removal. This process of fast arc lithosphere thinning may apply where simultaneously the volcanic arc is split in two and normal convergence is high enough. As serpentinization strongly decreases P-wave velocity, we propose a new interpretation of a published seismic profile below Guadeloupe. The seismic layer previously interpreted as the arc lower crust may rather be a layer of serpentinized mantle, as supported by spatial correlations between gravimetric and magnetic anomalies. Consequently, at the scale of Guadeloupe Island, the fore-arc Moho would be shallower than initially assumed, with a dome shape more consistent with both the extensive deformation active since the Oligocene in the inner fore-arc and the CPD doming.
ISSN: 0040-1951

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01505300
https://hal-insu.archives-ouvertes.fr/insu-01505300
https://hal-insu.archives-ouvertes.fr/insu-01505300/document
https://hal-insu.archives-ouvertes.fr/insu-01505300/file/Gailler-2017.pdf
DOI : 10.1016/j.tecto.2017.03.014

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
In Taiwan, about one third of the lithospheric plate convergence between Eurasia and the Philippine Sea plate is accommodated on the eastern coast across the narrow Longitudinal Valley (LV). The Longitudinal Valley Fault (LVF) is the main seismically active fault zone in this region. However, the spatial distribution of ground deformation due to interseismic loading on locked fault segments remains widely unknown. To address this problem, we use a "permanent scatterer" (PS) interferometric synthetic aperture radar (InSAR) approach for processing the ERS satellite archives. The PS mean velocity maps allow accurately mapping and quantifying the ground deformation all along the LV. Assuming that, close to the surface, the fault plane along the central LVF creeping segment dips 55 degrees to the east, we derive a slip vector at the surface of similar to 25 mm/yr with a mean rake of 70 degrees. In agreement with our PS observations, shallow seismicity indicates a clear change in the fault mechanical behavior of the creeping segment around Fuli town. Finally, we propose a combination of the PS velocity fields for estimating a 3-D map of ground deformation. In the southern part of the LV, the vertical component reveals an uplift of the Coastal Range with respect to the LV of similar to 10 mm/yr. Moreover, between Taitung and Luyeh, the vertical deformation is essentially accommodated along the Luyeh Strand. Finally, north of Rueisuei, the Coastal Range uniformly subsides at similar to 15 mm/yr relative to the western side of the LV. However, a local uplift pattern is detected around latitude 23 degrees 42'.
ISSN: 0148-0227

hal-00595532
https://hal.archives-ouvertes.fr/hal-00595532
DOI : 10.1029/2010JB007898

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Based on global earthquake catalogs, the hypocenters, nodal planes, and seismic moments of worldwide subduction plate interface earthquakes were extracted for the period between 1900 and 2007. Assuming that the seismogenic zone coincides with the distribution of 5.5 <= M < 7 earthquakes, the subduction interface seismogenic zones were mapped for 80% of the trench systems and characterized with geometrical and mechanical parameters. Using this database, correlations were isolated between significant parameters to identify cause-effect relationships. Empirical laws obtained in previous studies were revisited in light of this more complete, accurate, and uniform description of the subduction interface seismogenic zone. The seismogenic zone was usually found to end in a fore-arc mantle, rather than at a Moho depth. The subduction velocity was the first-order controlling parameter for variations in the physical characteristics of plate interfaces, determining both the geometry and mechanical behavior. As such, the fast subduction zones and cold slabs were associated with large and steep plate interfaces, which, in turn, had large seismic rates. The subduction velocity could not account for the potential earthquake magnitude diversity that was observed along the trenches. Events with M-w >= 8.5 preferentially occurred in the vicinity of slab edges, where the upper plate was continental and the back-arc strain was neutral. This observation was interpreted in terms of compressive normal stresses along the plate interface. Large lateral ruptures should be promoted in neutral subduction zones due to moderate compressive stresses along the plate interface that allow the rupture to propagate laterally.
ISSN: 1525-2027

hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681/document
https://hal.archives-ouvertes.fr/hal-00617681/file/heuretG32011.pdf
DOI : 10.1029/2010GC003230

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the development and on the distribution of the deformation in the upper mantle and particularly beneath transform plate boundaries. USArray experiment and the remarkable increase of the dataset in California for the past ten years allowed us to scrutinize the lateral variations of the anisotropy in the vicinity of the San Andreas Fault zone. We have confirmed and increased the detection of two layers of anisotropy beneath this plate boundary. The first layer, located in the lithosphere, is related to the deformation induced at the fault, and the other one, located in the asthenosphere, is coherent with the anisotropy observed far from it, its origin is however less clear. We show that the deformation zone associated both to the San Andreas, Calaveras and Hayward Faults, is likely 40 km wide at 70 km depth. We then performed numerical thermomechanical modeling (ADELI) of the displacement of a transform plate boundary associated with the computation of the development of crystallographic fabrics using a viscoplastic selfconsistent approach (VPSC). We analyzed the distribution of the deformation in the model ant looked after the possible interactions at depth between deformation caused at surface by the strike-slip dynamic of the fault and the shearing at the base of the lithosphere caused by the horizontal displacement of the plates. Elastic properties derived from the crystallographic fabrics modeled, show that such interactions exist and induce, beneath the fault zone, a progressive rotation of the crystallographic fabrics with depth. Seismological signature of these smooth rotations is however not relevant with the presence of two anisotropic layers as proposed beneath California. We thus consider that a decoupling zone exists between the lithosphere and the asthenosphere beneath the California to account for the sharp separation between a lithospheric and an asthenospheric deformation. We furthermore estimate that anisotropy observed far form the San Andreas Fault in California cannot be explained only by the drag of the asthenosphere by the North America lithosphere as proposed in our article. Indeed, we can only expect few tenths of second of splitting delay from the anisotropic properties derived from the numerical modeling of a plate moving in the same direction and in the same velocity than the North American lithosphere only for 10 Ma of displacement. As delays observed in California rather reach 1.5 s, anisotropy in this region thus requires the existence of an active asthenospheric flow to be explained.
Le travail réalisé pendant cette thèse a permis d'apporter de nouvelles contraintes sur le développement et la distribution de la déformation dans le manteau supérieur et plus particulièrement au niveau des grandes limites de plaques décrochantes. Grâce à l'apport de l'expérience USArray et d'une dizaine d'années d'enregistrements sismologiques supplémentaires, nous avons pu étudier, de manière précise, les variations d'anisotropie dans le voisinage de la Faille de San Andreas. Nous avons confirmé et étendu l'observation de deux couches anisotropes sous cette limite de plaque. On y observe une première couche localisée dans la lithosphère marquant la déformation induite à la limite de plaque, et une autre, asthénosphérique, cohérente avec l'anisotropie observée loin de la faille et d'origine plus discutée. Nous avons montré que la zone de déformation associée aux failles de San Andreas, Calaveras et d'Hayward a, vraisemblablement, une largeur d'au moins 40 kilomètres en base de lithosphère, sous chacune de ces failles. Nous avons ensuite procédé à la modélisation thermomécanique (ADELI) de la migration d'une limite de plaques décrochante couplée à une modélisation du développement de fabriques cristallographiques par une approche viscoplastique auto-cohérente (VPSC). Ceci nous a permis d'y observer le développement de la déformation et les conséquences des possibles interactions entre la déformation décrochante en surface et le cisaillement en base de lithosphère dû au déplacement horizontal des plaques. Les propriétés élastiques déduites des fabriques cristallographiques modélisées montrent que de telles interactions existent et provoquent, sous la limite de plaques, une rotation des orientations cristallographiques avec la profondeur. Le signal associé à ces rotations progressives n'est toutefois pas cohérent avec la présence de deux couches d'anisotropie comme proposée sous la faille de San Andreas. Nous pensons par conséquent qu'il existe, sous la Californie, une zone de découplage entre la lithosphère et l'asthénosphère, permettant d'individualiser une déformation lithosphérique d'une déformation asthénosphérique. Nous estimons, en outre, que l'anisotropie observée dans l'asthénosphère sous la Californie ne peut être expliquée seulement par le cisaillement induit par le déplacement de la lithosphère Nord Amérique. En effet, les propriétés anisotropes obtenues par modélisation à partir d'une plaque se déplaçant dans une direction et une vitesse proche de celle de la plaque Amérique du Nord montrent qu'on ne peut espérer guère plus que quelques dixièmes de seconde de délai au bout de 10 Ma de déplacement. Les déphasages mesurés en Californie étant de l'ordre de 1,5 s, il est donc nécessaire d'invoquer la présence d'écoulements mantelliques actifs sous cette région.
https://tel.archives-ouvertes.fr/tel-00767124

tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124/document
https://tel.archives-ouvertes.fr/tel-00767124/file/theseBonnin.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
P>The Strait of Hormuz area is a transition zone between the continental collision of the Zagros (west) and the subduction of an oceanic part of the Arabian Plate beneath the Makran wedge (east). Geology and recent GPS measurements indicate that about 15 mm yr-1 of relative motion in N10 degrees E direction is accommodated by two major fault systems: (1) the NNW-trending Minab-Zendan-Palami (MZP) fault system that connects the Main Zagros Thrust (MZT) to the inner Makran thrust system and the Frontal subduction thrust and (2) the N-trending Sabzevaran-Kahnuj-Jiroft (SKJ) fault system that bounds the Jazmurian depression to the west. We use dense GPS measurements along four transects across these fault systems in order to determine the strains spatial distribution. The northern GPS transect confirms the total fault slip rates for both fault systems estimated by the tectonic analyses (about 10 and 7.3 mm yr-1 in N10 degrees direction across the MZP and SKJ fault systems, respectively). For both fault systems, the elastic deformation spreads over shear zones that are several tens of kilometres wide. However, transects located close to latitude 27 degrees N reveal a much narrower shear zone (similar to 10 km) for the MZP fault system. Moreover, we confirm that most of the present-day strain is transferred towards the frontal subduction thrust rather than towards the inner Makran thrusts. In order to complement this new GPS velocity field with spatially dense measurements, we processed a set of ERS radar images by the radar interferometry (InSAR) technique. We used both a 'stacking' and a 'persistant-scatterers' approach to differentiate the ground deformation signal which spatial gradient is expected to be very low, from the atmospheric signal. Results from these interferograms appear to be relatively in agreement with the GPS-determined strain distribution. Nevertheless, they confirm the absence of any superficial creep behaviour since no sharp discontinuity on interferometric phase can be noted on any interferogram. Finally, we use a purely kinematic 'block model' inversion process to calculate slip rates and locking depths for each fault system from our GPS measurements. These models suggest that the relative quiescence over the last 200 yr has certainly produced a slip deficit as high as 2 m. So, we may wonder if the MZP fault system is not late in the interseismic phase of its earthquake cycle.
ISSN: 0956-540X

hal-00429386
https://hal.archives-ouvertes.fr/hal-00429386
DOI : 10.1111/j.1365-246X.2009.04321.x

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Continuous Global Positioning System (CGPS) position time series from eastern North America constrain the pattern and magnitude of regional crustal deformation. Initial analysis delineates consistent uplift patterns, as expected from glacial isostatic adjustment (GIA) predictions, but the associated horizontal deformation is not definitive, in part due to the short time periods for a significant number of the available stations. We employ an eigenpattern decomposition in order to define a unique, finite set of deformation patterns for this continuous GPS data. Similar in nature to the empirical orthogonal functions historically employed in the analysis of atmospheric and oceanographic phenomena, the method derives the eigenvalues and eigenstates from the diagonalization of the correlation matrix using a Karhunen-Loeve expansion (KLE). The KLE technique is used to identify the important modes in both time and space for the CGPS data, modes that potentially include signals such as horizontal and vertical GIA, tectonic strain, and seasonal effects. Here we filter both the vertical and horizontal velocity patterns on different spatiotemporal scales in order to study the potential geophysical sources, after the removal of correlated and random noise. The method is successful in disaggregating the linear vertical signal from more variable and less spatially correlated signals. The vertical and horizontal results are compared to the predictions of the ICE-3G GIA loading model with a number of plausible mantle viscosity profiles. The horizontal velocity analysis allows for qualitative differentiation between several potential GIA models and suggests that, with longer time series, this technique can be employed to remove correlated noise and improve estimates of crustal strain patterns and their sources.
ISSN: 0033-4553

hal-00795454
https://hal.archives-ouvertes.fr/hal-00795454
DOI : 10.1007/s00024-011-0420-1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Probabilistic seismic hazard analyses (PSHA) are commonly based on frequency magnitude statistics from 50-100 yearlong earthquake catalogs, assuming that these statistics are representative of the longer-term frequency of large earthquakes. We test an alternative PSHA approach in continental western Canada, including adjacent areas of northwestern U. S. A., using regional strain rates derived from 179 Global Positioning System (GPS) horizontal velocities. GPS strain rates are converted to earthquake statistics, seismic moment rates, and ground shaking probabilities in seismic source zones using a logic-tree method for uncertainty propagation. Median GPS-based moment rates and shaking estimates agree well with those derived from earthquake catalogs in only two zones (Puget Sound and mid-Vancouver Island). In most other zones, median GPS-based moment rates are 6-150 times larger than those derived from earthquake catalogs (shaking estimates 2-5 times larger), although the GPS-based and catalog estimates commonly agree within their 67% uncertainties. This discrepancy may represent an under-sampling of long-term moment rates and shaking by earthquake catalogs in some zones; however a systematic under-sampling is unlikely over our entire study area. Although not demonstrated with a high confidence level, long-term regional aseismic deformation may account for a significant part of the GPS/catalog discrepancy and, in some areas, represent as much as 90% of the total deformation budget. In order to integrate GPS strain rates in PSHA models, seismic versus aseismic partitioning of long-term deformation needs to be quantified and understood in terms of the underlying mechanical processes.
ISSN: 0148-0227

hal-00689004
https://hal.archives-ouvertes.fr/hal-00689004
DOI : 10.1029/2011JB008213