Éditeur(s) : HAL CCSD
Résumé : Today, one of the main challenges in the oil industry is the exploitation of new resources in naturally fractured reservoirs often located in structurally complex areas such as plate boundaries, mountain ranges or near salt structures. While numerical models of rock deformation based on continuum mechanics are becoming industry standard in providing efficient means for modelling natural fractures in reservoirs, the knowledge of past perturbed stress fields, which is referred as the type (normal, wrench or reverse), orientation and magnitude of the regional or local tectonic stresses that needs to be applied as boundary condition in numerical simulations, is often unknown or approximated.The essence of this thesis is to improve the recovery of the paleostress field needed to constrain numerical simulations. I first described and discuss through a comprehensive mechanically-based multi-parametric study how far we can rely on the commonly used paleostress inversion methods based on fault slip data and the Wallace and Bott assumptions. I then compared this method with a new generation technique based on geomechanics using field observations. Since slip markers on faults are hardly observed in core or image log, I used observed natural fracture data as main drivers for the inversion of the paleostress using geomechanically-based method. I demonstrated, through various outcrop and subsurface examples, how this can efficiently be done. Finally, I aimed at addressing the problem of polyphase fracture data sets with unknown mechanical type (joints, faults, stylolites ...) and expanded the mechanical stress inversion to the separation of tectonic phases.
Aujourd'hui, l'un des principaux défis dans l'industrie pétrolière est l'exploitation de nouvelles ressources dans les réservoirs naturellement fracturés souvent situés dans des zones structurellement complexes tels que les frontières de plaques, les chaînes de montagnes ou les structures de proches des dômes de sel. Alors que les modèles numériques de déformation des roches basée sur la mécanique des milieux continus fournissant des moyens efficaces pour la modélisation de fractures naturelles dans les réservoirs, sont devenus la norme dans l'industrie, les paléo-contraintes régionales ou locales appliquées comme condition aux limites dans les simulations numériques, définies par le régime (normal, décrochant ou inverse), l'orientation, et la magnitude des contraintes tectoniques, sont souvent inconnues ou approximées.L'essence de cette thèse est d'améliorer la prédiction du champ de paléo-contrainte nécessaire pour contraindre les simulations numériques. J’ai décrit dans un premier temps à travers une étude comparative multi-paramétrique complète basée sur la mécanique, dans quelle mesure nous pouvions compter sur les méthodes d'inversion des paléo-contraintes basées sur les hypothèses de Wallace et Bott et les données de glissement sur les failles. J’ai ensuite comparé ces méthodes avec une technique d’inversion de nouvelle génération basée sur la géomécanique en utilisant les observations de terrain. Puisque les marqueurs de glissement sur les failles sont rarement observés le long du forage, j’ai utilisé l’inversion géomécanique des contraintes pour les données de fractures naturelles observées. J’ai alors démontré, l’efficacité de cette technique à travers divers exemples d'affleurements et de subsurface. Enfin, j’ai proposé une solution afin de résoudre le problème des données de fractures polyphasées à type cinématique inconnu (joints, failles, stylolites ...) et étendu l’inversion de contrainte basée sur la géomécanique à la séparation des phases tectoniques.
https://hal.archives-ouvertes.fr/tel-01324110

tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110/document
https://hal.archives-ouvertes.fr/tel-01324110/file/theselejri.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Recent mathematical calculations allow us to define set fracture intensity (I), i.e., the amount of rock mass affected by fracture sets, independently of the investigation mode. This parameter, characteristic of each rock mass, is of much interest to describe the mechanical response of the rock mass to external influences. The aim of this work is to apply these mathematical equations on one site using measurements of three distinct fracture sets: (1) on a plane surface, (2) along a scanline, and (3) using borehole imaging, in order to evaluate and explain variability in collected data. Even if the three types of measurements give differences on absolute intensity values, they still define similar trends, i.e., the order of the fracturing impact of joint sets is the same from the three measurement methods, irrespective of the fact that obtained values are quite different from one survey method to another. We discuss the possible origins of these biases.
ISSN: 1435-9529

hal-01121556
https://hal.archives-ouvertes.fr/hal-01121556
DOI : 10.1007/s10064-014-0572-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Both oedometric and plane-strain tests were performed with parallelepipedic samples made of synthetic granular, cohesive, frictional and dilatant rock analogue material GRAM2. For the first time parallel sets of fractures that have all the characteristics of natural joints were reproduced in the laboratory. The fractures are regularly spaced, normal to σ3, and have plumose morphology very similar to that of natural joints. These fractures can form at tensile stress σ3 much smaller in magnitude than the tensile strength of material and even at slightly compressive σ3. When mean stress σ exceeds a certain value, the fractures become oblique to σ1 (the obliquity increases with σ), forming networks of conjugate shear bands/fractures. These results of plane-strain experiments are in good agreement with those of better controlled conventional axisymmetric tests on a similar material in Chemenda et al. (2011b) and are closer to real geological situations. Both types of experiments are complementary. Their results lead to the conclusion that at least certain categories of natural fractures (including joints, and conjugate shear fractures/bands) were initiated as deformation localization bands. The band orientation is defined by the constitutive properties/parameters (notably the dilatancy factor) that are sensitive to σ.
ISSN: 0040-1951

hal-00795555
https://hal.archives-ouvertes.fr/hal-00795555
DOI : 10.1016/j.tecto.2011.11.021

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : Extension fractures of two types defined by the mean stress σ were generated in a synthetic rock analogue material. When σ is very small, the fractures are mode I cracks with smooth surfaces. At higher σ, these surfaces have plumose topography, with the amplitude increasing with σ. Both SEM observations and mechanical measurements show that fractures/discontinuities in the latter case are initiated as dilatancy localization bands. They form under tensile or slightly compressive normal stress and can be seen as running constitutive instabilities. The similarity between the plumose fractography of the experimental fractures and natural joints suggests similarity in the formation mechanism.
ISSN: 1631-0721

hal-00585886
https://hal.archives-ouvertes.fr/hal-00585886
DOI : 10.1016/j.crme.2011.01.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present comparative field studies in folded areas (Southern France. Moroccan Western Atlas and Abruzzo, Italy) giving new insights into fracture distribution within folded rocks of the shallow brittle crust. We show that the curvature in folds formed in brittle mechanical units is usually accommodated by multiple "dip-domain boundaries" (appearing as curvature discontinuities at fold scale) corresponding to relatively narrow and dense fracture zones, striking parallel or slightly oblique to the fold axis. They separate "dip-domains" where curvature is absent or moderate. It is shown that the dip-domain boundaries (which are obvious in the case of kink folds or box-fold anticlines) are currently present as multiple subtle hinges even when the curvature appears continuous at first sight. The nature of dip-domain boundaries is studied, they often cut through the whole thickness of the mechanical units Their internal structure varies, and a non-exhaustive typology is proposed For each type, an interpretative kinematic scenario shows how the dip-domain boundaries could initiate and develop. We suggest two kinds of origins (1) they could correspond to the reactivation of inherited, along-strike fracture zones (opening-mode fracture concentrations such as big joints, fracture corridors. Inherited faults, etc), (2) they could be created as mechanical instabilities during the fold formation (syn-folding origin), in particular through small reverse faults. In both cases, early zones of weakness localize the dip-domain boundaries, and control the Increase in curvature in association with increasing fracture density within the boundary. Because they represent well-defined vertically and axially persistent sub-seismic fracture zones generally limited to the thickness of the folded unit, dip-domain boundaries could enhance the axial permeability of folded and fractured reservoirs.
ISSN: 0191-8141

hal-00512651
https://hal.archives-ouvertes.fr/hal-00512651
DOI : 10.1016/j.jsg.2010.03.002

Éditeur(s) : HAL CCSD
Résumé : International audience
The deformation of natural systems in response to subsurface water storage and redistribution provides insightsinto the main water flow path within heterogeneous systems, including the role of faults or fractures. A longbaseline tiltmeter was installed in the low-noise underground laboratory of Rustrel (LSBB) to study the responseof the Fontaine de Vaucluse (FDV) karst hydrosystem to water cycle. Tilt data and piezometric levels recorded in aborehole close to the LSBB show a strong correlation with the discharge of the system observed at the FDV spring30 km away. Over several months, tilt data were recorded on three base lines, thus allowing, for the first time,to study the tilt gradient variation that appears homogeneous. Such information provides a significant constrainton hydrological processes leading to the measured deformation. Several deformation models were tested usingthe ADELI code to estimate the type of hydro-mechanical structure that could reproduce the measured tilt andits gradient. On one hand, models show that uniform loading at the surface produces a much smaller signal thanobserved on measured data. On the other hand, the deformation related to the filling of a fracture following aprecipitation event requires unrealistic fracture size. Finally, we found that a suitable hydro-mechanical modelcorresponds to the loading of numerous fractures at the interface between the saturated and unsaturated zones. Sucha configuration predicts a tilt distribution in agreement with observations. This study suggests that tilt networksinto a karst system should provide key observation for deciphering hydrological processes
Geophysical Research Abstracts
Vienne, Austria

insu-01308594
https://hal-insu.archives-ouvertes.fr/insu-01308594

Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The mantle above a subducting slab is the site of complex interactions between deformation, partial melting, fluid migration and magma transport. To constrain these interactions and their effects on olivine deformation, we analyze microstructures, crystal preferred orientations, and water contents of peridotite xenoliths entrained by andesites of the Avacha volcano, southern Kamchatka arc. These xenoliths are refractory spinel harzburgites that have coarse-grained microstructures with widely spaced subgrain boundaries and sinuous grain boundaries in olivine, consistent with deformation by dislocation creep under low deviatoric stress (< 13 MPa) and with a significant contribution from diffusional processes. Analysis of crystal preferred orientations (CPO) indicates dominant activation of high-temperature, low-stress {0kl}[100] slip systems in olivine and of(100)[001] in orthopyroxene. In most samples, coarse opx crystals, elongated parallel to the lineation, enclose small olivine grains in crystallographic continuity with neighbouring crystals, indicating crystallization of orthopyroxene at the expense of olivine as a result of reactive percolation of Si-rich fluids coeval with the high-temperature deformation. Secondary crystallization of interstitial orthopyroxene led locally to development of opx-rich lenses parallel to the foliation, characterized by a decrease in olivine grain size and dispersion of the olivine CPO without changing the dominant slip systems. Half of the samples also show acicular orthopyroxene aggregates with which is associated a fine-grained matrix composed of rounded strain-free olivine, orthopyroxene, spinel, and rare amphibole crystals. This matrix occurs pervasively along grain boundaries or forms millimeter-scale irregular lenses and anastomosing veinlets that crosscut the coarse crystals and their ductile deformation structures. Both acicular orthopyroxene and the fine-grained matrix are interpreted as resulting from reactive transport of H2O-rich fluids under static conditions, probably in the lithospheric mantle. Infrared analyses show that olivine contains 1-8 center dot 6 ppm by weight of water. These low water contents are similar to those observed in spinel peridotites from other subduction zones and probably record both the low solubility of water in olivine at low pressure and dehydration during exhumation of the xenoliths. Water contents in orthopyroxene are highly variable (25-506 ppm H2O), probably recording spatially heterogeneous interaction with fluids or melts and compositional disequilibrium in the studied samples. Change in the dominant percolation mechanism from porous flow to fracturing suggests cooling, consistent with the low temperatures estimated from pyroxene thermometry (< 800-900 degrees C). The Avacha xenoliths therefore record pervasive deformation of a region of the mantle under asthenospheric conditions, followed by its accretion to the base of the lithosphere, probably as a result of cooling of the mantle wedge. Percolation of Si-rich fluids or hydrous melts is recorded at all stages; this probably enhanced diffusion and lowered deviatoric stresses during ductile deformation, but did not change the dominant slip direction in olivine from [100] to [001].
ISSN: 0022-3530

hal-00456053
https://hal.archives-ouvertes.fr/hal-00456053
DOI : 10.1093/petrology/egp085

Éditeur(s) : HAL CCSD Elsevier
Résumé : The slow advance of a crack in soda-silicate glasses was studied at nanometer scale by in-situ and real-time atomic force microscopy (AFM) in a well-controlled atmosphere. An enhanced diffusion of sodium ions in the stress-gradient field at the sub-micrometric vicinity of the crack tip was revealed through several effects: growth of nodules in AFM height images, changes in the AFM tip–sample energy dissipation. The nodules patterns revealed a dewetting phenomenon evidenced by ‘breath figures'. Complementary chemical micro-analyses were done. These experimental results were explained by a two-step process: (i) a fast migration (typical time: few milliseconds) of sodium ions towards the fracture surfaces as proposed by Langford et al. [J. Mat. Res. 6 (1991) 1358], (ii) a slow backwards diffusion of the cations as evidenced in these AFM experiments (typical time: few minutes). Measurements of the diffusion coefficient of that relaxing process were done at room temperature. Our results strengthen the theoretical concept of a near-surface structural relaxation due to the stress-gradient at the vicinity of the crack tip. The inhomogeneous migration of sodium ions might be a direct experimental evidence of the presence of sodium-rich channels in the silicate structure [A. Meyer et al., Phys. Rev. Let. 93 (2004) 027801].
ISSN: 0022-3093

hal-00407634
https://hal.archives-ouvertes.fr/hal-00407634
DOI : 10.1016/j.jnoncrysol.2006.09.034

Éditeur(s) : HAL CCSD Elsevier
Résumé : In order to address the question of the processes involved during shear zone nucleation, we present a petro-structural analysis of millimetre-scale shear zones within the Roffna rhyolite (Suretta nappe, Eastern central Alps). Field and microscopic evidences show that ductile deformation is localized along discrete fractures that represent the initial stage of shear zone nucleation. During incipient brittle deformation, a syn-kinematic metamorphic assemblage of white mica + biotite + epidote + quartz precipitated at ca. 8.5 ± 1 kbar and 480 ± 50 °C that represent the metamorphic peak conditions of the nappe stacking in the continental accretionary wedge during Tertiary Alpine subduction. The brittle to ductile transition is characterized by the formation of two types of small quartz grains. The Qtz-IIa type is produced by sub-grain rotation. The Qtz-IIb type has a distinct CPO such that the orientation of c-axis is perpendicular to the shear fracture and basal and rhombhoedric slip systems are activated. These Qtz-IIb grains can either be formed by recrystallization of Qtz-IIa or by precipitation from a fluid phase. The shear zone widening stage is characterized by a switch to diffusion creep and grain boundary sliding deformation mechanisms. During the progressive evolution from brittle nucleation to ductile widening of the shear zone, fluid–rock interactions play a critical role, through chemical mass-transfer, metasomatic reactions and switch in deformation mechanisms.
ISSN: 0191-8141

hal-01355954
https://hal.archives-ouvertes.fr/hal-01355954
DOI : 10.1016/j.jsg.2016.02.015

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault-rock types: (1) the foliated fault rocks of the Moutière-Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra- and transgranular fracturing, pressure solution of quartz and feldspar grains and syn-kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz- and calcite-sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz-sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.
ISSN: 0954-4879

hal-01115177
https://hal.archives-ouvertes.fr/hal-01115177
DOI : 10.1111/ter.12100

Éditeur(s) : HAL CCSD
Résumé : Fault zones are major discontinuities in sedimentary basins. Understanding their role on fluid migrations is an essential issue to (i) characterize the mechanisms and kinematics of deformation and (ii) to determine the parameters which control the distribution of energetic or mineral resources. This work applies to faulting under a temperature range of 200-250°C, corresponding to that of deeply buried reservoirs as well as potentially seismogenic fault zones. The studied faults are normal faults affecting the “Grès d’Annot” Formation, a Priabonian-Rupelian siliclastic turbidite succession of the Alpine foreland basin. They are located in two distinct areas: the Moutière-Restefond area in the eastern part of the basin and the Estrop area in the western part. Vitrinite reflectance outside fault zones indicates maximal temperatures of 240-260°C at Moutière-Restefond and 170-200°C at Estrop, i.e. burial depths around 8 km and 6 km, respectively, assuming a mean geothermal gradient of 30°C/km. Burial was due to underthrusting below the Embrunais-Ubaye Alpine nappes, the difference in burial between the two areas traducing the westward taper of the nappe front.The studied faults affect alternating arkosic sandstone beds and pelite layers with offsets from centimeters to decameters. Two types of core zones are recognized: (1) the foliated core zones of the Moutière-Restefond area, where deformation dominated by pressure solution and synkinematic phyllosilicate neoformation resulted in a foliated fabric, and (2) the core zones of the Estrop area, characterized by dilatant quartz-mineralized veins and breccia. Fault and host rock petrophysical properties were measured on drill plugs, using the water porosity technique and nitrogen permeability technique under 2 Mpa of confining pressure. In the Moutière-Restefond fault zones, plug axes were oriented in three orthogonal directions corresponding to the main deformation axes (X, Y, Z) of the foliated arkose to characterize the effect of structural anisotropy. In the Estrop fault zones, where deformation does not show equivalent anisotropy, the plug axes were oriented according to the main fault plane orientation (i.e., parallel to azimuth, parallel to dip and normal). In each fault zone, the porosity of fault rocks is equivalent to that of host rocks. In the Moutière-Restefond fault zones, the plugs parallel to the X and Z axes of deformation have a permeability similar to that of the host rocks, whereas permeability parallel to the Y axis (i.e. parallel to the foliation and the main fault plane) is one order of magnitude higher. By contrast, the permeability values in the Estrop fault zones are isotropic and equivalent to the host rock values. This study highlights the importance of various types of deformation mechanisms and related fluid-rock interactions in determining different fault rock types within a similar protolith, ultimately controlling distinct petrophysical properties of fault zones.
Les zones de failles constituent des discontinuités majeures dans la croûte supérieure. Ce mémoire s’intéresse aux failles actives à des profondeurs de 5-8 km, i.e. dans des conditions pouvant jouer un rôle important (i) sur le comportement mécanique de de la croûte, en particulier sur son potentiel sismogénique et (ii) sur la compartimentation des réservoirs géologiques profondément enfouis.Les failles étudiées sont des failles normales (rejet jusqu’à 50 mètres) affectant des alternances de bancs de grès arkosiques et de pélites dans les Grès d’Annot, une formation turbiditique d’âge priabonien-rupélien du bassin d’avant-chaine alpin. Les Grès d’Annot ont été enfouis sous les nappes de l’Embrunais-Ubaye peu de temps après leur dépôt et exhumés au Miocène moyen-supérieur. L’étude a été réalisée dans deux secteurs des Alpes de Haute-Provence, (1) le secteur de l’Estrop (chaine des Trois Evéchés, dans la partie occidentale du bassin) et (2) le secteur de Point Vert-Restefond (alentours du col de la Bonette, dans la partie orientale du bassin). La réflectance de la vitrinite dans les Grès d’Annot indique des températures maximales de 160-190°C dans le secteur (1) et de 240-260 °C dans le secteur (2) , soit des profondeurs d’enfouissement de 5-6 km et 8-10 km, respectivement, dans l’hypothèse d’un gradient géothermique moyen de 25-30°C/km. A partir des observations microstructurales, de données d’inclusions de fluides, de modélisations thermodynamiques sur chlorites syncinématiques et des indices de cristallinité de l’illite, on a établi que les failles du secteur (1) ont fonctionné à une température d’environ 200°C pour une pression de 0.6Kbar et celles du secteur (2) dans une gamme de température de 200-220°C et de pression comprise entre 0.6 et 1.1 Kba. L’activité de la faille de Point-Vert a été datée par la méthode 40Ar/39Ar au Miocène inférieur (21 Ma). Ces failles sont interprétées comme associées aux premiers stades du soulèvement résultant de l’activité des chevauchements dans le socle sous-jacent.Deux types principaux de roches de failles caractérisent les failles étudiées. Les brèches dilatantes sont majoritaires dans les zones de failles du secteur (1) alors que les arkoses foliées sont majoritaires dans les zones de failles du secteur (2). Les brèches dilatantes témoignent de mécanismes de déformation dominés par la fracturation transgranulaire et la pression-solution des silicates. Ce dernier mécanisme se manifeste principalement par d’abondantes précipitations cycliques de quartz, les stylolites restant peu développés. Les géométries structurales sont associées à l’activation de plans T de Riedel déterminant l’ouverture de relais extensifs et un régime localement dilatant. Nous associons ce type de roche de faille à une faible pression effective au cours de la déformation.La déformation cisaillante exprimée dans les arkoses foliées témoigne de mécanismes de déformation dominés par (i) la fracturation intragranulaire et transgranulaire, (ii) la pressionsolution/ précipitation des silicates, principalement le quartz, (iii) la néoformation de micas blancs liée à l’altération des feldspaths et (iv) la précipitation de chlorite. Ce travail montre également que les transformations minéralogiques liées aux interactions fluide-roche dans la zone de faille (forte augmentation de la proportion des phyllosilicates au dépend des feldspaths) changent radicalementla composition minéralogique de la roche. Nous associons ce type de roche de faille à une forte pression effective au cours de la déformation.La pétrophysique montre que les brèches de failles (secteur 1) ont une perméabilité isotrope et équivalente à celle du protolithe (10-3mD sous 2 MPa de confinement) tandis que les roches foliées (secteur 2) montrent une augmentation de perméabilité (10-2mD) selon l’axe Y de la déformation, d’un ordre de grandeur supérieure aux perméabilités suivant les axes X et Z et dans la roche hôte (10-3mD). Ce drain préférentiel potentiel est associé à l’orientation des phyllosilicates dans la foliation.
https://hal.archives-ouvertes.fr/tel-01310382

tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382/document
https://hal.archives-ouvertes.fr/tel-01310382/file/Th%C3%A8seCAVAILHES2012.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep-seated gravitational spreading (DSGS) affects the slopes of formerly glaciated mountain ridges. On Mars, DSGS has played a key role in shaping the landforms of the giant Valles Marineris troughs. Though less spectacular, DSGS is common in terrestrial orogens, where understanding its mechanics is critical in the light of the ongoing climate change because it is a potential source of catastrophic landslides in deglaciated valleys. We conducted parametric numerical studies in order to identify important factors responsible for DSGS initiation. DSGS models are computed using an elastoviscoplastic finite element code. Using ADELI's software, we reproduce topographic ridge spreading under the effect of valley unloading. Two types of spreading topographic ridges are investigated, homogeneous or with horizontal rheological layering. We find that gravitational instabilities are enhanced by high slopes, which increase gravitational stress, and low friction and cohesion, which decrease yield stress. In the unlayered ridge, instability is triggered by glacial unloading with plastic strain concentration inside the ridge and at the base of the high slopes. Vertical fractures develop in the upper part of the slope, potentially leading to fault scarps. Ridge homogeneity promotes a deformation mode controlled by uphill-facing normal faulting and basal bulging. In the second case, the ridge encompasses horizontal geological discontinuities that induce rock mass anisotropy. Discontinuity located at the base of the slope accumulates plastic strain, leading to the formation of a sliding plane evolving into a landslide. The presence of a weak layer at ridge base therefore promotes another slope deformation mode ending up with catastrophic failure. Mechanical conditions and slope height being equal, these conclusions can probably be extrapolated to Earth. Compared with Mars, DSGS on Earth is inhibited because terrestrial topographic gradients are lower than in Valles Marineris, an effect counterbalanced by increased gravitational stress, where the intensity of deformation is enhanced because of the Earth gravity potential.
ISSN: 0169-555X

hal-01420007
https://hal.archives-ouvertes.fr/hal-01420007
DOI : 10.1016/j.geomorph.2016.06.011

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Temperature and fluid pressure conditions control rock deformation and mineralization on geological faults, and hence the distribution of earthquakes1. Typical intraplate continental crust has hydrostatic fluid pressure and a near-surface thermal gradient of 31 ± 15 degrees Celsius per kilometre2, 3. At temperatures above 300–450 degrees Celsius, usually found at depths greater than 10–15 kilometres, the intra-crystalline plasticity of quartz and feldspar relieves stress by aseismic creep and earthquakes are infrequent. Hydrothermal conditions control the stability of mineral phases and hence frictional–mechanical processes associated with earthquake rupture cycles, but there are few temperature and fluid pressure data from active plate-bounding faults. Here we report results from a borehole drilled into the upper part of the Alpine Fault, which is late in its cycle of stress accumulation and expected to rupture in a magnitude 8 earthquake in the coming decades4, 5. The borehole (depth 893 metres) revealed a pore fluid pressure gradient exceeding 9 ± 1 per cent above hydrostatic levels and an average geothermal gradient of 125 ± 55 degrees Celsius per kilometre within the hanging wall of the fault. These extreme hydrothermal conditions result from rapid fault movement, which transports rock and heat from depth, and topographically driven fluid movement that concentrates heat into valleys. Shear heating may occur within the fault but is not required to explain our observations. Our data and models show that highly anomalous fluid pressure and temperature gradients in the upper part of the seismogenic zone can be created by positive feedbacks between processes of fault slip, rock fracturing and alteration, and landscape development at plate-bounding faults.
ISSN: 0028-0836

hal-01685757
https://hal.archives-ouvertes.fr/hal-01685757
DOI : 10.1038/nature22355

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Carbonation of peridotite is a widespread process in nature, with emerging societal and environmental implications through geological storage of CO2. We studied the micro- and nano-scale structures associated with the carbonation of peridotite pervaded by a CO2-rich water and the induced changes of its hydrodynamic properties. Focused ion beam (FIB) nanotomography was coupled with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. An experimental sample of dunite core percolated by a CO2-rich fluid (pCO2 = 11 MPa) at 160 °C was compared with a naturally carbonated sample from the Atlantic Ridge (Exp. IODP 304). Results of the 8-days percolation experiment show continuous alteration of olivine into magnesite locally associated with a poorly crystalline serpentine-type mineral referred to as proto-serpentine. The experiment is also characterized by an overall decrease in rock porosity (from 7.7 to 6.4%) and permeability (from 8.5 × 10− 16 to 1.7 × 10− 16 m2). The primary inter-granular porosity (1 to 10 μm) is progressively filled with magnesite, leading to the overall decrease of permeability. At the same time, a secondary small-scale porosity (10 nm to 1 μm) is created at the tip of the dissolution features along the (010) cleavage planes of olivine grains. Carbonate crystals grow within these etch-pit structures behind the dissolution front. Dissolution and precipitation occur at a relative rate that maintains the secondary porosity over the timescale of the experiment (i.e. carbonate growth has to be the slowest one). This process is interpreted as an interface coupled dissolution-precipitation mechanism of olivine carbonation. Proto-serpentine is only formed in highly reduced flow areas, such as small olivine etch-pits (10 to 500 nm wide), which are more isolated from CO2 input. SEM-FIB analyses show the 3D preferential orientation of the dissolution-precipitation planes within a given olivine grain. It suggests the formation of lateral connections between the etch-pits (infra-micrometric “channels”) providing access to reactants and removing reaction products at the reaction sites. The experimental results show that olivine dissolution and magnesite precipitation converge to a quasi-steady state resulting in a constant carbonation rate controlled by reaction kinetics and not by mass transfer for this flow regime. The system self-regulates, independently of the porosity change at least during this incipient stage of olivine carbonation. Similar textures are observed in natural samples collected at 170 m-depth in the vicinity of veinlets driving late fluids down into the cooling oceanic lithosphere. This suggests that similar mechanisms are active in nature and can play an important role in the late, low temperature alteration stages of fractured peridotite. These results also highlight the critical role of nm-scale spatial arrangement of dissolution and precipitation features on mass transfers and on the sustainability of olivine carbonation through coupled dissolution-precipitation processes.
ISSN: 0009-2541

hal-01684733
https://hal.archives-ouvertes.fr/hal-01684733
DOI : 10.1016/j.chemgeo.2017.11.013