Éditeur(s) : Yale University
Résumé : Sea-surface temperature images of the coastal upwelling regions off Northwest Africa show that the core of upwelling is sometimes located far from the coast. This has been documented in three regions that share a common feature, namely a wide and shallow continental shelf. This upwelling feature plays a key role in the ecology of the Canary Current System. It creates an innerfront which provides retention for biological material, e.g. fish eggs and larvae, in the highly productive nearshore environment. An analytical model has been developed based on a two dimensional extension of Ekman's solution. The linear and steady response of a homogeneous ocean forced by an upwelling-favorable wind provides a mechanism for the upwelling separation from the coast. The merging of the surface and bottom Ekman layers induces a very weak cross-shore circulation and a "kinematic barrier" for the Ekman transport divergence. In the case of an alongshore wind, the barrier is located near the isobath h ≈ 0.4D, where D is the thickness of Ekman layers. This yields an upwelling cell which is essentially concentrated in the region 0.5D < h < 1.25D, with upwelling occurring preferentially near the isobath h ≈ 0.6D. It turns out that the cross-shore width of upwelling scales with D/S, the ratio of Ekman depth to bottom topographic slope. The application of this solution to real bathymetric profiles rationalizes, not only the offshore upwelling observations in Northwest Africa, but also the influence of topography on the cross-shelf structure of a wind-driven coastal upwelling. The model also quantifies the effect of the cross-shore wind component showing how it drives the nearshore pressure gradient adjustment and how it affects the upwelling. A linear numerical experiment reproduces the theoretical steady solution, thereby allowing investigation of the transient regime. Relaxation of the hypothesis in the numerical model validates the linear assumption of the theory and then allows investigation of the sensitivity to friction parameterizations and the influence of stratification. The latter leads to an "oscillation" of the upwelling cell with seaward migration driven by outcropping and homogeneization of the water column, and, coastal incursion driven by a "boundary layers splitting" process caused by shoreward advection of the isopycnal dome and stratification of the inner shelf.
Journal of Marine Research (Yale University), 2008-09 , Vol. 66 , N. 5 , P. 589-616

Droits : 2008 Yale University
http://archimer.ifremer.fr/doc/2008/publication-6334.pdf
DOI:10.1357/002224008787536790
http://archimer.ifremer.fr/doc/00000/6334/

Éditeur(s) : Estuaries Research Federation
Résumé : Estuarine systems are complex environments where seasonal and spatial variations occur in concentrations of suspended particulate matter, in primary constituents, and in organic matter content. This study investigated in the laboratory the flocculation potential of estuarine-suspended particulate matter throughout the year in order to better identify the controlling factors and their hierarchy. Kinetic experiments were performed in the lab with a "video in lab" device, based on a jar test technique, using suspended sediments sampled every 2 months over a 14-month period at three stations in the Seine estuary (France). These sampling stations are representative of (1) the upper estuary, dominated by freshwater, and (2) the middle estuary, characterized by a strong salinity gradient and the presence of an estuarine turbidity maximum. Experiments were performed at a constant low turbulent shear stress characteristic of slack water periods (i.e., a Kolmogorov microscale > 1,000 A mu m). Flocculation processes were estimated using three parameters: flocculation efficiency, flocculation speed, and flocculation time. Results showed that the flocculation that occurred at the three stations was mainly influenced by the concentration of the suspended particulate matter: maximum floc size was observed for concentrations above 0.1 g l(-1) while no flocculation was observed for concentrations below 0.004 g l(-1). Diatom blooms strongly enhanced flocculation speed and, to a lesser extent, flocculation efficiency. During this period, the maximum flocculation speed of 6 A mu m min(-1) corresponded to a flocculation time of less than 20 min. Salinity did not appear to automatically enhance flocculation, which depended on the constituents of suspended sediments and on the content and concentration of organic matter. Examination of the variability of 2D fractal dimension during flocculation experiments revealed restructuring of flocs during aggregation. This was observed as a rapid decrease in the floc fractal dimension from 2 to 1.4 during the first minutes of the flocculation stage, followed by a slight increase up to 1.8. Deflocculation experiments enabled determination of the influence of turbulent structures on flocculation processes and confirmed that turbulent intensity is one of the main determining factors of maximum floc size.
Estuaries and coasts : Journal of the Estuarine Research Federation (1559-2723) (Estuaries Research Federation), 2009-07 , Vol. 32 , N. 4 , P. 678-693

Droits : 2009 Springer
http://archimer.ifremer.fr/doc/2009/publication-6631.pdf
DOI:10.1007/s12237-009-9160-1
http://archimer.ifremer.fr/doc/00000/6631/

Éditeur(s) : [s.n.]
Résumé : Plan and three dimensional drawing of Portus Pulchri, showing the town of Porto-Bello during Vice Admiral Edward Vernon's attack.
(Funding) Funded in part by the University of Florida, the Florida Heritage Project of the State University Libraries of Florida, the Institute for Museum and Library Services, and the U.S. Department of Education's TICFIA granting program.
Panama -- Colon -- Portobelo

Droits : This item is presumed to be in the public domain. The University of Florida George A. Smathers Libraries respect the intellectual property rights of others and do not claim any copyright interest in this item. Users of this work have responsibility for determining copyright status prior to reusing, publishing or reproducing this item for purposes other than what is allowed by fair use or other copyright exemptions. Any reuse of this item in excess of fair use or other copyright exemptions may require permission of the copyright holder. The Smathers Libraries would like to learn more about this item and invite individuals or organizations to contact Digital Services (UFDC@uflib.ufl.edu) with any additional information they can provide.
002356826
ALW1254
http://ufdc.ufl.edu/UF00072326/00001

Éditeur(s) : HAL CCSD
Résumé : International audience
Several assessments of vulnerability and resilience have been attempted at a country level through composite indices but they are barely in accord with a holistic view of sustainable development. We suggest graph theory to structure a network of variables that depict vulnerability and resilience from a sustainable development perspective. Vulnerability is defined as the propensity to incur adverse shocks whereas resilience is the capacity to cope with their negative effects. We identify two control dimensions of vulnerability–resilience (economic and political) and three contingency factors (the social, environmental and the peripheral dimensions). The specificity of the control dimensions is rooted in their impact on all other sides of the pentagon. We propose an algorithm to select the key variables useful in building a composite index that conforms to the structure of these five dimensions while preventing loss of information. An application is provided on Singapore, which has been specified as a typical case of resilience.
Economic Modelling

hal-01291338
https://hal.archives-ouvertes.fr/hal-01291338

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The objective of this study was to realize a three-dimensional (3-D) geological model of the deep basin structure of the Middle Durance region (of folds and faults) by integration of geological and geophysical data, and to evaluate its fault geometry and tectonic history. All of the available geophysical and geological data were compiled in three dimensions using the gOcad geomodeler. The geological and geophysical data were used to build a 3-D geological model of the Middle Durance region. The data on the 3-D geometry of fault surfaces and stratigraphic horizons and the thickness maps of the main stratigraphic units are supported by the 3-D geological model. We show that the Middle Durance Fault cannot be interpreted as a single fault plane that affected the entire Meso-Cenozoic sedimentary layers and the Paleozoic basement but as a listric segmented faulting system in sedimentary layers, rooted in Triassic evaporites and a normal block faulting system in the basement. This decoupling level in the Triassic layers reveals thin-skin deformation, formed by strong mechanical decoupling between the Mesozoic sedimentary cover and the Paleozoic basement. This study also confirms that the Provence geological structure has resulted mainly from Pyrenean deformation, which was partly reactivated by Alpine deformation. We demonstrate that the Middle Durance Fault Zone is a transfer fault that accommodates deformation of the sedimentary filling of the South-East Basin through modified fold geometry over a zone of 7 km to 8 km around the main segment of the fault zone.
ISSN: 0278-7407

hal-01172221
https://hal.archives-ouvertes.fr/hal-01172221
DOI : 10.1002/2014TC003749

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper, we determine dislocation core structures and Peierls stresses of wadsleyite, a high-pressure mineral present in the Earth mantle. We use a Peierls-Nabarro model combined with a finite-element method in which we introduce two-dimensional generalized stacking fault energies. Several potential slip planes of wadsleyite are considered. The results show that dislocations in this mineral can exhibit complex dislocation cores with linear or non-collinear dissociation and even three-dimensional dislocation cores. The calculation of the Peierls stresses gives information on the potential activity of slip systems governing the plasticity of wadsleyite. Our study confirms experimental observations that 1/2 < 1 1 1 >{1 0 1} is the easiest slip system in this structure at high-pressure and that [1 0 0](0 1 0) is the second easiest. Both these easily slip systems have dislocations that dissociate into collinear partial dislocations. In contrast [0 1 0] dislocations with very large Burgers vector (11.2 angstrom) are stabilized by complex dissociations involving four partial dislocations.
ISSN: 1359-6454

hal-00475548
https://hal.archives-ouvertes.fr/hal-00475548
DOI : 10.1016/j.actamat.2009.10.047

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The influence of redox alteration on the growth and proteomic pattern of Listeria monocytogenes was investigated. A redox shock was induced in cultures by addition of 3mM ferricyanide (FeCN) and 6mM dithiothreitol (DTT) to increase or to decrease respectively the redox potential naturally occurring at the beginning of growth. In both conditions, the reducing and oxidizing redox shock had a strong influence, decreasing the maximum growth rate by half compared to a control culture. The proteomic analysis of L. monocytogenes performed by two-dimensional difference gel electrophoresis (2D-DIGE) exhibited twenty-three proteins differentially expressed (P<0.05), among these, many were oxidoreductases, and proteins involved in cellular metabolism (glycolysis, protein synthesis), detoxification (kat) or adhesion (Lmo1634).
ISSN: 1874-3919

hal-00877138
https://hal-univ-rennes1.archives-ouvertes.fr/hal-00877138
DOI : 10.1016/j.jprot.2012.11.010
PUBMED : 23195917

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper deals with the study of the kinematic dimension of scribbling activities executed by kindergarten children aged from 3 to 6 years old from three grades. For this purpose, three sigma-lognormal features, six classical ones and one hybrid feature related to visuo-motor skills are extracted from scribbles realized using five different Type Grib. The statistical analysis of these data illustrates that sigma-lognormal modeling can satisfactorily reconstruct kindergarten children’s scribbles. Moreover, this preliminary study confirms that there are significant differences between grades with respect to six of the features we studied, regardless of the nature of the scribbling movement made by children. These features are related to rapidity, fluidity and precision of linear and curvilinear movements used for scribbling tasks.
17th Biennial Conference of the International Graphonomics Society
Pointe-à-Pitre, Guadeloupe

hal-01165910
https://hal.univ-antilles.fr/hal-01165910
https://hal.univ-antilles.fr/hal-01165910/document
https://hal.univ-antilles.fr/hal-01165910/file/IGS_2015_submission_28.pdf

Éditeur(s) : Elsevier
Résumé : A coupled three-dimensional physical-biogeochemical model was developed in order to simulate the ecological functioning of the Rio de la Plata estuary and plume. The biogeochemical model reproduces the nitrogen cycle between five compartments: dissolved inorganic nitrogen, phytoplankton, zooplankton, detritus and dissolved organic nitrogen. The coupling is tested in seasonal climatological configurations and for the particular year 1999. The circulation is forced with Parana and Uruguay rivers discharges, NCEP wind and tide. The biogeochemical model includes loads of inorganic and organic nitrogen from both rivers. The model reproduces the correct tidal amplitudes in the estuary, as well as the most outstanding features of the observed horizontal and vertical structures of the salinity plume. Simulated surface chlorophyll a concentrations exhibit maximum values all year long seaward of the turbidity front, between the 0.5 and 15 isohalines, in agreement with SeaWiFS images of the area. The model simulates well the low primary production in the light-limited highly turbid tidal river (20 gC/m(2)/yr), the high production area in the frontal zone where it can reach 500 gC/m(2)/yr, and the nutrient-limited production in the outer estuary and inner shelf (300 gC/m(2)/yr), with realistic values in each case. According to the 1999 model simulation, the tidal river is the location of organic nitrogen remineralization with a consequent increase of the inorganic pool. At the entrance of the frontal zone, inorganic nitrogen represents about 75% of the whole nitrogen pool, it is reduced to 50% at its sea end-member. The outer estuary has the same sink role for inorganic nitrogen, suggesting that organic nitrogen is the major form exported to the shelf.
Continental Shelf Research (0278-4343) (Elsevier), 2005-03 , Vol. 25 , N. 5-6 , P. 629-653

Droits : 2004 Elsevier Ltd.
http://archimer.ifremer.fr/doc/2005/publication-334.pdf
DOI:10.1016/j.csr.2004.10.003
http://archimer.ifremer.fr/doc/00000/334/

Éditeur(s) : HAL CCSD
Résumé : International audience
The Glaser-Eglinton reaction between either two C or N propargylglycine (Pra or NPra) amino acids, in the presence of copper(II), led to cyclic hexa- and octapeptides constrained by a butadiyne bridge. The on-resin cyclization conditions were analyzed and optimized. The consequences of this type of constraint on the three dimensional structure of these hexapeptides and octapeptides were analyzed in details by NMR and molecular dynamics. We show that stabilized short cyclic peptides could be readily prepared via the Glaser oxidative coupling either with a chiral (Pra), or achiral (NPra) residue. The 1,3-butadiyne cyclization, along with disulfide bridged and lactam cyclized hexapeptides expands the range of constrained peptides that will allow exploring the breathing of amino acids around a β-turn structure.
Bioorganic and Medicinal Chemistry

hal-01091920
https://hal.archives-ouvertes.fr/hal-01091920
PUBMED : 25456082
DOI : 10.1016/j.bmc.2014.10.026

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD E Schweizerbart Science Publishers
Résumé : International audience
We present an electron tomography study of dislocations in deformed olivine single crystals, at ca. 0.5 T m, along two distinct orientations. The easiest slip systems are [001](100) and [001]{110}. Disorientating a single crystal away from easy glide conditions leads to massive cross-slip, which generates three-dimensional dislocations, and thus contributes to hardening. Fast motion of curved non-screw dislocation in those planes leaves long straight screw dislocations which bear lattice friction and control plastic strain. We have identified several hardening mechanisms. Non-screw [001] dislocations interact elastically to form dipoles. Recovery mechanisms leading to dipole annihilation are observed, but they are slow at those temperatures and produce numerous sessile loops. These loops represent obstacles for gliding dislocations. Interactions between dislocations and sessile loops produce sessile segments (super jogs), which efficiently impede dislocation motions.
ISSN: 0935-1221

hal-01277821
https://hal.archives-ouvertes.fr/hal-01277821
DOI : 10.1127/ejm/2015/0027-2481

Éditeur(s) : HAL CCSD BMJ Publishing Group
Résumé : International audience
OBJECTIVES: To compare the quality of life (QoL) in three groups of workers suffering or not from shoulder pain (SP) lasting more than one month during the preceding 12 months. METHOD: Between 2002-2005, 3710 workers were randomly included in a French surveillance system of work-related musculoskeletal disorders. In 2007, 2332 responded to a follow-up questionnaire, 2049 were still active. Workers completed the Nordic Questionnaire to assess SP and the SF-36 for QoL. Three groups were defined according to health status at follow-up: Group 1: workers without SP (men: 87.9%; women: 79.2%) Group 2: workers with SP without neck, elbow and hand/wrist pain lasting more than one month during the preceding 12 months (men: 4.2%; women: 6.0%) Group 3: workers with SP and neck, elbow or hand/wrist pain lasting more than one month during the preceding 12 months (men 7.9%; women 14.8%) The mean scores of SF-36 were compared with Kruskall-Wallis test and post-hoc comparisons were performed. Analyses were stratified by gender. RESULTS: Workers in group 2 had lower scores of physical health compared to workers in group 1, whatever the gender. Workers in group 3 had lower scores of physical and mental health compared to workers in group 1. Two dimensions of mental health in men and the four dimensions of physical health and one dimension of mental health in women had lower scores in group 3 compared to group 2. CONCLUSIONS: Workers with SP and upper-limb pain have poorer QoL compared to workers without SP and workers with SP without upper-limb pain.
ISSN: 1351-0711

hal-01063898
https://hal.archives-ouvertes.fr/hal-01063898
DOI : 10.1136/oemed-2014-102362.258

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A variety of atypical plume-like structures and focused upwellings that are not rooted in the lower mantle have recently been discussed, and seismological imaging has shown ubiquitous small-scale convection in the uppermost mantle in regions such as the Mediterranean region, the western US, and around the western Pacific. We argue that the three-dimensional return flow and slab fragmentation associated with complex oceanic subduction trajectories within the upper mantle can generate focused upwellings and that these may play a significant role in regional tectonics. The testable surface expressions of this process are the outside-arc alkaline volcanism, topographic swell, and low-velocity seismic anomalies associated with partial melt. Using three-dimensional, simplified numerical subduction models, we show that focused upwellings can be generated both ahead of the slab in the back-arc region (though -five times further inward from the trench than arc-volcanism) and around the lateral edges of the slab (in the order of 100 km away from slab edges). Vertical mass transport, and by inference the associated decompression melting, in these regions appears strongly correlated with the interplay between relative trench motion and subduction velocities. The upward flux of material from the depths is expected to be most pronounced during the first phase of slab descent into the upper mantle or during slab fragmentation. We discuss representative case histories from the Pacific and the Mediterranean where we find possible evidence for such slab-related volcanism.
ISSN: 0012-821X

hal-00553075
https://hal.archives-ouvertes.fr/hal-00553075
DOI : 10.1016/j.epsl.2010.08.012

Éditeur(s) : Elsevier
Résumé : We investigated the influence of bioturbation by macrofauna on the vertical distribution of living (stained) benthic foraminifera in marine intertidal sediments. We investigated the links between macrofaunal bioturbation and foraminiferal distribution, by sampling from stations situated on a gradient of perturbation by oyster-farming, which has a major effect on benthic faunal assemblages. Sediment cores were collected on the French Atlantic coast, from three intertidal stations: an oyster farm, an area without oysters but affected by oyster biodeposits, and a control station. Axial tomodensitometry (CT-scan) was used for three-dimensional visualization and two-dimensional analysis of the cores. Biogenic structure volumes were quantified and compared between cores. We collected the macrofauna, living foraminifera, shells and gravel from the cores after scanning, to validate image analysis. We did not investigate differences in the biogenic structure volume between cores. However, biogenic structure volume is not necessarily proportional to the extent of bioturbation in a core, given that many biodiffusive activities cannot be detected on CT-scans. Biodiffusors and larger gallery-diffusors were abundant in macrofaunal assemblage at the control station. By contrast, macrofaunal assemblages consisted principally of downward-conveyors at the two stations affected by oyster farming. At the control station, the vertical distribution of biogenic structures mainly built by the biodiffusor Scorbicularia plana and the large gallery-diffusor Hediste diversicolor was significantly correlated with the vertical profiles of living foraminifera in the sediment, whereas vertical distributions of foraminifera and downward-conveyors were not correlated at the station affected by oyster farming. This relationship was probably responsible for the collection of foraminifera in deep sediment layers (> 6 cm below the sediment surface) at the control station. As previously suggested for other species, oxygen diffusion may occur via the burrows built by S. plana and H. diversicolor, potentially increasing oxygen penetration and providing a favorable microhabitat for foraminifera in terms of oxygen levels. By contrast, the absence of living foraminifera below 6 cm at the stations affected by oyster farming was probably associated with a lack of biodiffusor and large gallery-diffusor bioturbation. Our findings suggest that the effect of macrofaunal bioturbation on the vertical distribution of foraminiferal assemblages in sediments depends on the effects of the macrofauna on bioirrigation and sediment oxidation, as deduced by Eh values, rather than on the biogenic structure volume produced by macrofauna. The loss of bioturbator functional diversity due to oyster farming may thus indirectly affect infaunal communities by suppressing favorable microhabitats produced by bioturbation.
Journal of Experimental Marine Biology and Ecology (0022-0981) (Elsevier), 2009-03 , Vol. 371 , N. 1 , P. 20-33

Droits : 2009 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6146.pdf
DOI:10.1016/j.jembe.2008.12.012
http://archimer.ifremer.fr/doc/00000/6146/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The three-dimensional S-wave velocity structure beneath the South Pacific Superswell is obtained from joint broadband seismic experiments on the ocean floor and islands. We collected only approximately 800 relative times of long-period teleseismic SH-waves by using a waveform cross-correlation from 76 events occurring from January 2003 to May 2005. We conducted relative time tomography to obtain a 3D structure to depths of 1600 km. In the resultant image, we find a characteristic distribution of low- velocity regions. The most prominent features are a large doughnut-shaped low-velocity region at 800 km depth, and an elongated large low-velocity region beneath the Society to Pitcairn hotspots at 1200 km depth. Our model suggests that a large low shear velocity province rooted in the D00 extends upwards and culminates near the top of the lower mantle beneath the central part of the South Pacific Superswell although its perfect continuity is not still confirmed.
ISSN: 0094-8276

hal-01389114
http://hal.univ-reunion.fr/hal-01389114
http://hal.univ-reunion.fr/hal-01389114/document
http://hal.univ-reunion.fr/hal-01389114/file/Tanaka_PLUME_lower_mantle_GRL2009.pdf
DOI : 10.1029/2009GL037568

Résumé : 3D modelling of the fishing gear flume tank at IFREMER's Lorient site Within the framework of their training, it is suggested that students in their first year of the "Industrial Product Design" BTS (vocational training certificate) at the Colbert de Lorent school participate in an internship in order to put into practice their acquired skills and to familiarise themselves with the work environment. Erwan Davigo did his internship at IFREMER's Lorient station, in the Fishing Technology department, from 18 May 1998 to 26 June 1998 (placement supervisor: Gérard Bavouzet). The study topic focuses on modelling the Lorient station's test basin in three dimensions, thus making it possible to complete the documentation base. IFREMER is presented in its entirety in the first part of the report. The second part explains the work performed.
Dans le cadre de leur formation, il est proposé aux étudiants de première année de BTS « Conception de Produits Industriels » du lycée Colbert de Lorient d'effectuer un stage afin de mettre en pratique les connaissances acquises et de se familiariser avec le monde du travail. Erwan Davigo a fait son stage à la station IFREMER de Lorient, au sein du service Technologie des Pêches, du 18 mai 1998 au 26 juin 1998 (maître de stage : Gérard Bavouzet). Le sujet d'étude porte sur la modélisation en trois dimensions du bassin d'essais de la station de Lorient, permettant ainsi de compléter la base documentaire. L' IFREMER est présenté dans son ensemble dans la première partie du rapport. La seconde partie expose le travail réalisé

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1999/rapport-2650.pdf
http://archimer.ifremer.fr/doc/00000/2650/

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Lakes are major depositional systems for which the related depositional processes have long been considered relatively simple. Breaking this statement, this study presents a detailed analysis of deposits in Lake Saint-Jean, the third largest natural lake in Québec. In addition to postglacial deltaic and coastal depositional systems fringing the lake, current-controlled features such as a large subaqueous prograding wedge and three sediment drifts have been identifi ed in its central portion based on two-dimensional (2-D) acoustic high-resolution subbottom profiles. The large subaqueous prograding wedge is a 4-km-long and up to 15-m-thick heterolithic shelf-like construction in the southeastern part of the lake. The three sediment drifts are 0.1–0.5-km-long and 2–5-mthick mud mounds distributed on the lake floor in the central portion of the lake. Diatom analyses and radiocarbon dating show that the development of these current-controlled features occurred during the lacustrine phase, after the disconnection with the postglacial marine Laflamme Gulf at 8.5 cal. k.y. B.P. Depositional facies show evidence of recurrent bottom-current activity. Related deposits alternate with pelagic sedimentation stages characterized by the settling of mud and biogenic accumulations. We investigated the origin of bottom currents using a numerical simulation (SYMPHONIE, an oceanographic model), with the aim of modeling wind-induced lake-scale water circulation. Simulations suggest that the subaqueous prograding wedge and the three sediment drifts result from wind-induced bottom currents generated by storm events having wind speed greater than 10 m s–1. Such strong winds are able to significantly affect sedimentation in the central portion of Lake Saint-Jean. Theresulting wind-induced sedimentary features were integrated into a refi ned lacustrine depositional model that summarizes the evolution of a group of water bodies referred to as “wind-driven water bodies.” This study applies a new tool for lake strata characterization and highlights the potential diffi cultyin differentiating them from marine deposits in the geological record.
ISSN: 0016-7606

insu-01184724
https://hal-insu.archives-ouvertes.fr/insu-01184724
DOI : 10.1130/B31145.1

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
ABSTRACT: BACKGROUND: Climate change poses unprecedented challenges, ranging from global and local policy challenges to personal and social action. Heat-related deaths are largely preventable, but interventions for the most vulnerable populations need improvement. Therefore, the prior identification of high risk areas at the community level is required to better inform planning and prevention. We aimed to demonstrate a simple and flexible conceptual framework relying upon satellite thermal data and other digital data with the goal of easily reproducing this framework in a variety of urban configurations. RESULTS: The study area encompasses Rennes, a medium-sized French city. A Landsat ETM + image (60 m resolution) acquired during a localized heatwave (June 2001) was used to estimate land surface temperature (LST) and derive a hazard index. A land-use regression model was performed to predict the LST. Vulnerability was assessed through census data describing four dimensions (socio-economic status, extreme age, population density and building obsolescence). Then, hazard and vulnerability indices were combined to deliver a heatwave health risk index. The LST patterns were quite heterogeneous, reflecting the land cover mosaic inside the city boundary, with hotspots of elevated temperature mainly observed in the city center. A spatial error regression model was highly predictive of the spatial variation in the LST (R2 = 0.87) and was parsimonious. Three land cover descriptors (NDVI, vegetation and water fractions) were negatively linked with the LST. A sensitivity analysis (based on an image acquired on July 2000) yielded similar results. Southern areas exhibited the most vulnerability, although some pockets of higher vulnerability were observed northeast and west of the city. The heatwave health risk map showed evidence of infra-city spatial clustering, with the highest risks observed in a north--south central band. Another sensitivity analysis gave a very high correlation between 2000 and 2001 risk indices (r = 0.98, p < 10-12). CONCLUSIONS: Building on previous work, we developed a reproducible method that can provide guidance for local planners in developing more efficient climate impact adaptations. We recommend, however, using the health risk index together with hazard and vulnerability indices to implement tailored programs because exposure to heat and vulnerability do not require the same prevention strategies.
ISSN: 1476-072X

inserm-00762303
http://www.hal.inserm.fr/inserm-00762303
http://www.hal.inserm.fr/inserm-00762303/document
http://www.hal.inserm.fr/inserm-00762303/file/1476-072X-11-38.pdf
DOI : 10.1186/1476-072X-11-38

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003