Éditeur(s) : Université de Brest
Résumé : The channel-lobe transition zone has been studied in two turbiditic systems: the Amazon channel-mouth lobe complex at the termination of the last eight channel-levee systems and the Neochannel termination, the last active channel of the Petit-Rhone turbidite system. - In the two cases, the internal geometry and stacking pattern of the deposits show a significant control of the configuration (size and shape) of the receiving basins, their morphology (gradients and subtle gradient changes), and their degree of confinement. - The Amazon and Petit-Rhone systems, with lobes built after the Last Glacial Maximum and the ensuing sea-level rise, evidence the major impact of external forcings (climatic events and eustatic variations) that induce variations in sediment fluxes delivered to the deep basin and therefore exert a control on channel-mouth lobes construction. The channel-mouth lobes of the Amazon and Petit-Rhone systems, even if they are located at great distances from the river mouths, at the termination of the turbidite systems and in areas characterised by subtle morphological variations, are both constrained by combined internal (accommodation and compensation) and external factors (post-glacial deconnection between the fluvial system and the deep basin).
La zone de transition chenal-levées/lobes a été étudiée dans 2 systèmes turbiditiques : le complexe de lobes à la terminaison des 8 derniers chenaux de l'éventail de l'Amazone et la terminaison du Néochenal, dernier chenal de l'éventail du Petit-Rhône. - Dans les deux cas, l'agencement des dépôts et leur évolution dans l'espace et le temps révèlent un fort contrôle de la configuration des réceptacles (taille et forme), de la morphologie des fonds (pentes et taux de changement des pentes) et du degré de confinement. - Les systèmes de l'Amazone et du Petit-Rhône, dont les lobes se sont construits à partir du Dernier Maximum Glaciaire et lors de la remontée du niveau marin qui a suivi, ont en outre permis de souligner l'impact majeur, sur la mise en place des lobes terminaux, de certains forçages externes (événements climatiques et variations eustatiques), qui déterminent les variations des flux sédimentaires arrivant au bassin. Ainsi, bien que situés à des distances considérables des sources fluviatiles et dans des zones distales où les variations de relief sont très ténues, les lobes terminaux de ces deux grands systèmes turbiditiques se sont révélés contraints à la fois par des processus internes (processus de compensation) et par des processus externes (déconnexion post-glaciaire du fleuve et du bassin).

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2008/these-6796.pdf
http://archimer.ifremer.fr/doc/00000/6796/

Éditeur(s) : HAL CCSD Wiley
Résumé : SUBSURF
International audience
Similarity of form between subaerial and submarine landscapes affected by erosion could suggest similarities in the process of erosion, such as by runoff and sedimentary flows, respectively. On the other hand, if aspects of form vary, its characteristics may be used to identify the environmental origin of erosion. Towards these goals, this contribution addresses the morphology of submarine volcanoes (seamounts) with widely differing histories of erosion. One set from the Pacific Ocean never exposed above sea level includes Cretaceous-age seamounts near Hawai'i (including Apu'upu'u Seamount), two seamounts of < 3 Ma in age near a mid-ocean ridge and the 11-4 Ma Jasper Seamount. These seamounts are all isolated from continents and hence from any erosion associated with mass wasting of unstable terrigenous deposits. In such isolated submarine environments, surfaces erode slowly from in situ weathering, mass wasting and scouring by sedimentary flows initiated by slope failure in pelagic or bedrock materials. The Pacific seamounts are compared with Valencia Seamount in the western Mediterranean, exposed subaerially for 100-400 k.y. during the Messinian Salinity Crisis before 5 Ma. Multibeam and deeply towed sidescan sonar data of Valencia Seamount reveal features typical of subaerial erosion of volcanic islands, such as canyons and relatively uneroded sectors (planezes) between them. Using a simple topographical reconstruction, the apparent erosion depth typically reaches 100 m within canyons and up to 180 m in places. Whereas the younger Pacific seamounts do not show these erosional features, the much older Cretaceous seamounts do have channels, which in one example suggests up to 200 m of incision. Both Valencia and Apu'upu'u seamounts have channel longitudinal profiles that are steep and typically linear to concave upwards. The erosion depth of Apu'upu'u Seamount is significant, despite the seamount's persistent submarine environment, because of its greater age, steeper flanks and greater contributing areas to channels compared with Valencia Seamount. These results illustrate that the channel morphology resulting from submarine erosion can become similar to that produced by subaerial erosion given sufficient time.
ISSN: 0950-091X

hal-00411425
https://hal.archives-ouvertes.fr/hal-00411425
DOI : 10.1111/j.1365-2117.2008.00355.x

Éditeur(s) : HAL CCSD
Résumé : Both short-term and long-term morphodynamics of sand barrier systems forced by moderate storm conditions have been studied significantly in the literature. However, the dynamics of the emerged beach -- from a seaside water depth of ~ 1.5 metres below the lowest tide to the back-barrier -- impacted by typhoons remain scarcely documented. This study focuses on the analysis and a better understanding of the morphologic changes of such an emerged beach, when it is forced by one typhoon, several typhoons or the combination of a summer season of typhoons and a winter season of Monsoon wave/ wind conditions. The monitoring of near-shore hydrodynamics and beach morphodynamics was performed in the Wan-Tzu-Liao sand barrier from November 2011 to August 2012. Waves, currents and water level were measured at an offshore buoy (Cigu buoy; 18 m of water depth; 1.5 km seaward the studied zone), a current profiler (4 m of water depth), and a serie of pressure sensors deployed along a cross-shore section from the lower intertidal zone up to the eolian dune. Tide was obtained from a tide gauge inside the lagoon and wind conditions were obtained respectively from an inland station and the offshore Cigu buoy. Morphodynamic changes were monitoring thanks to DGDPS surveys performed on a grid including a 300 meters long portion of sand barrier extending from the subtidal zone to the back-barrier, as well as along two cross-shore and two long-shore profiles located within the grid. Surveys were performed each week during winter and just before and after each storm during the typhoons summer season. This field methodology provided a new and very robust dataset in order to quantify sand barrier dynamics exposed to high-energy events at various time scales. Amongst the eight typhoons recorded, TALIM is the most significant and representative. Offshore wave height reached 10.34 m (Tp = 14.6 s) at Cigu buoy and 2.3 m in 4 m of water depth. Morphological changes recorded 6 m of retreat for the dune front, a 20 m large dune breaching and the occurence of a wash-over fan in the lagoon. These changes form a well-known morphodynamic responses to moderate storms. More surprisingly, TALIM drove a significant nourishment of the supratidal zone, as well as a positive sand balance on the whole sand barrier. Five other typhoons resulted in the same type of morphological responses while two typhoons resulted in a strong erosion of the whole emerged beach. During winter and spring (moderate wave conditions and strong Monsoon winds), sand moved from the beach front to the back-barrier. For the whole year, the sand barrier recorded a 12 m landward migration concomitantly with a 12 m widening without abrasion of the dune elevation.
American Geophysical Union, Fall Meeting 2013

hal-01012312
https://hal.archives-ouvertes.fr/hal-01012312

Éditeur(s) : HAL CCSD
Résumé : During the course of their life cycle organisms are exposed to natural environment variations capable of inducing physiological, morphological and behaviour changes, thus a phenotypic plasticity. Phenotypic plasticity is the ability of a genotype to generate a new phenotype following exogeneous or endogeneous stress. Here, we investigated the phenotypic plasticity of the non-calcifying symbiotic cnidarian Anemonia viridis at multiple levels of structural complexity, in vivo and in vitro. In vivo, we determined the mechanisms behind the phenotypic plasticity under expected future climate change (i.e. ocean acidification and ocean warming). Our results show physiological changes in the inorganic carbon use of the sea anemone A. viridis exposed to high pCO2 during a long-term stress in natura or a short-term stress in controlled conditions. We then observed an equivalent decrease in carbonic anhydrase activity, a key enzyme of cnidarian carbon concentrating mechanisms. Also, we demonstrated that an increase in seawater temperature modified the response observed during a high pCO2 scenario. In vitro, we established a viable primary cell culture from regenerating tentacles of A. viridis. We determined the gastrodermal tissue origin of the cultivated cells and validated the use of this new tool to the in vitro study of stress response at the cellular level. The set-up of this powerful in vitro tool will open a multitude of perspectives for the study of cellular responses to exogeneous stress (as global change perturbations) and to endogeneous stress (as the symbiosis constraints experienced by symbiotic cnidarians)
Durant leur cycle de vie, les organismes sont exposés à des variations environnementales capables d'induire des changements physiologiques, morphologiques et comportementaux, résultant d’une plasticité phénotypique. La plasticité phénotypique est la capacité d'un génotype à générer un nouveau phénotype suite à un stress. Ici, nous avons étudié la plasticité phénotypique d’un Cnidaire symbiotique et non-calcifiant, l’anémone de mer Anemonia viridis, à de multiples niveaux de complexité structurale, in vivo et in vitro. In vivo, nous avons identifié les mécanismes sous-jacents de la plasticité phénotypique potentiellement induits par les futurs changements climatiques (acidification et réchauffement des océans). Nos résultats montrent des modifications dans l'utilisation du carbone inorganique par A. viridis exposée à une forte pCO2 lors d’un stress chronique in natura ou lors d’un stress court en conditions contrôlées. Nous avons ainsi observé une diminution des activités anhydrase carbonique, une enzyme clé des mécanismes de concentration du carbone chez les Cnidaires. Nous avons aussi démontré que l'augmentation concomittante de la température modifie la réponse observée lors d'une élévation seule de la pCO2. In vitro, nous avons établi une culture de cellules primaires viables issue de tentacules d’A. viridis en régénération. Nous avons déterminé l'origine gastrodermale des cellules cultivées et validé l'utilisation de ce nouvel outil pour l'étude de la réponse au stress au niveau cellulaire. Ce nouvel outil ouvre une multitude de perspectives pour l'étude des réponses cellulaires aux stress exogènes (changement climatique) et endogènes (contraintes dues à la symbiose)
https://tel.archives-ouvertes.fr/tel-01674220

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2016AZUR4136
tel-01674220
https://tel.archives-ouvertes.fr/tel-01674220
https://tel.archives-ouvertes.fr/tel-01674220/document
https://tel.archives-ouvertes.fr/tel-01674220/file/2016AZUR4136.pdf

Éditeur(s) : Elsevier
Résumé : During the Fanindien 2006 cruise of R/V 'Beautemps-Beaupre', high resolution multibeam bathymetry, sub-bottom profiling and sediment coring was carried out along the East African margin, offshore Tanzania and Mozambique (Indian Ocean). The newly acquired data reveal the presence of a giant deep-sea valley (the Tanzania channel) that is more than 10 km wide at 4000 m water depth, along the continental rise. The valley remains similar to 70 m deep and 7 km wide at 800 km from the Tanzania coast. Morphological comparison with worldwide submarine channels show that the Tanzania channel is one of the largest known submarine valleys. This discovery brings new light on development of submarine valleys that drain sediments originated from the East African Rift System (EARS) highlands (i.e. the Tanzania channel and its neighbor Zambezi channel located similar to 1000 km southward). Both of the systems have a morphology markedly different to the classical sinuous, V-shaped channels located at similar latitudes (e.g. the Zaire or Amazon channels). Their submarine drainage system consists of a downslope converging tributary canyons joining a central trunk channel in the continental rise. The presence of such giant deep-sea drainage systems is probably linked to a strong structural control on the sediment pathway, associated to a massive sediment transfer towards the Indian Ocean in relation with the tectonic activity of the East African Rift System (i.e. the uplift periods trough mid-Miocene and Plio-Pleistocene times) and its interplay with the East African equatorial climate changes.
Marine Geology (0025-3227) (Elsevier), 2008-12 , Vol. 255 , N. 3-4 , P. 179-185

Droits : 2008 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00324/43491/42958.pdf
DOI:10.1016/j.margeo.2008.09.002
http://archimer.ifremer.fr/doc/00324/43491/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The In-Ezzane volcanic district (EZD), located at the triple junction of Algeria, Niger and Libya belongs to the Eastern Hoggar, covers 350 km2 and includes 9 volcanic edifices that are probably aligned along NW-SE faults, parallel to the Tafassasset valley. The low volume (0.7 and 1 km3) of emitted lavas, the similar morphology of the monogenic cones and the lack of differentiated rocks indicate that the volcanic activity of the EZD was restricted in time and volume. The new K-Ar age (i.e. 2.86 ± 0.07 Ma) indicates that the EZD is contemporaneous with the last alkali volcanism paroxysm in Hoggar and with the nearby Libyan volcanics. The EZD alkali basalts (mainly basanite) show a remarkable homogeneous compositions both in major elements (44.8 ⩽ SiO2 ⩽ 45.8 wt.%; 5.2 ⩽ (Na2O + K2O) ⩽ 6.2 wt.%), trace elements (4.3 ⩽ Th ⩽ 5.5 ppm; 34.7 ⩽ La ⩽ 44.7 ppm; 16.1 < La/Yb(N) < 21.6) and radiogenic isotopes (0.70285 < 87Sr/86Sr < 0.70303; 0.51298 < 143Nd/144Nd < 0.51301; (19.212 < 206Pb/204Pb < 19.340, 15.589 < 207Pb/204Pb < 15.602 and 38.834 < 208Pb/204Pb < 38.903). Relative to the Hoggar alkaly basalts the EZD basalts appear systematically impoverished in incompatible elements and show a depleted signature both in Sr and Nd isotopes (almost MORB-like). The Pb isotopes are relatively enriched and intermediate between tholeiites and alkali basalts of the Hoggar. This unusual geochemical signature, is uneasy to reconcile with the known characteristics of the Hoggar swell, and would rather fingerprint a circum cratonic mantle lying beneath the west border of the Murzuq craton (Libya).
ISSN: 0899-5362

hal-01054340
https://hal.archives-ouvertes.fr/hal-01054340
DOI : 10.1016/j.jafrearsci.2013.12.001

Éditeur(s) : Elsevier
Résumé : During the Fanindien 2006 cruise of R/V 'Beautemps-Beaupre', high resolution multibeam bathymetry, sub-bottom profiling and sediment coring was carried out along the East African margin, offshore Tanzania and Mozambique (Indian Ocean). The newly acquired data reveal the presence of a giant deep-sea valley (the Tanzania channel) that is more than 10 km wide at 4000 m water depth, along the continental rise. The valley remains similar to 70 m deep and 7 km wide at 800 km from the Tanzania coast. Morphological comparison with worldwide submarine channels show that the Tanzania channel is one of the largest known submarine valleys. This discovery brings new light on development of submarine valleys that drain sediments originated from the East African Rift System (EARS) highlands (i.e. the Tanzania channel and its neighbor Zambezi channel located similar to 1000 km southward). Both of the systems have a morphology markedly different to the classical sinuous, V-shaped channels located at similar latitudes (e.g. the Zaire or Amazon channels). Their submarine drainage system consists of a downslope converging tributary canyons joining a central trunk channel in the continental rise. The presence of such giant deep-sea drainage systems is probably linked to a strong structural control on the sediment pathway, associated to a massive sediment transfer towards the Indian Ocean in relation with the tectonic activity of the East African Rift System (i.e. the uplift periods trough mid-Miocene and Plio-Pleistocene times) and its interplay with the East African equatorial climate changes. (C) 2008 Elsevier B.V. All rights reserved.
Marine Geology (0025-3227) (Elsevier), 2008-12 , Vol. 255 , N. 3-4 , P. 179-185

Droits : 2008 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2008/publication-6855.pdf
DOI:10.1016/j.margeo.2008.09.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz spans the plate boundary between Africa and Eurasia west of the Betic–Rif mountain belt. A narrow east dipping subduction zone descends beneath the Gulf of Cadiz and the straits of Gibraltar. The deep crustal structure of the Gulf and the adjacent SW Iberian and Moroccan margins is constrained by numerous multi-channel seismic reflection and wide-angle seismic surveys. A compilation of these existing studies is presented in the form of depth to basement, sediment thickness, depth to Moho and crustal thickness maps. These structural maps image an E–W trending trough, with thin (< 10 km) crust beneath the Gulf of Cadiz. This trough is filled by an eastward thickening wedge of sediments, reaching a thickness of 10–15 km in the eastern Gulf. These sediments are tectonically deformed, primarily along a series of westward-vergent thrust faults and represent a 200–250 km wide accretionary wedge. The northern and especially the southern limits of the accretionary wedge are marked by sharp morphological lineaments showing evidence of recent deformation. These tectonic limits are situated in an internal position with respect to the Miocene deformation front (external Betic and Rif allocthons), which has been abandoned. At the western boundary of the accretionary wedge, near the adjacent Seine and Horseshoe abyssal plains, an E–W trending basement high (Coral Patch Ridge) can be seen indenting the deformation front in an asymmetric manner. Analog modeling is performed using granular materials accreted against a semicircular backstop (representing the basement of the Rif and Betic mountain belts). The modeling initially produces a symmetric, arcuate accretionary wedge. The ensuing collision of an oblique rigid indenter retards accretion on one side, resulting in an embayment and a locally steeper deformation front. The deformation pattern observed in morphology and high-resolution seismic profiles suggests the accretionary wedge and underlying subduction system is still active. The implications of active subduction for the source region of the 1755 Lisbon earthquake and the regional seismic hazard assessment are discussed.
ISSN: 0040-1951

hal-00424922
http://hal.univ-brest.fr/hal-00424922
http://hal.univ-brest.fr/hal-00424922/document
http://hal.univ-brest.fr/hal-00424922/file/Gutscher_09Tphys_rev.pdf
DOI : 10.1016/j.tecto.2008.11.031

Éditeur(s) : Elsevier
Résumé : The study, which is based on repetitive bathymetric surveys, assesses changes and effects of one of the most important floods recorded in the Rhone Delta area: bottom morphology and sediment distribution in the Rhone outlet after the December 2003 flood are discussed by comparison between Digital Terrain maps (DTMs) of November 2003 and January 2004. The post-flood morphology shows that the whole of the system is active, mainly in the east. The channel of the Rhbne has been hollowed out on the left bank by more than 5 m, the eastern coast of the mouth has retreated 400 m, the mouth-bar has prograded 200 m and the slope of the delta front has increased by 0.19. The overlay of pre- and post-flood DTMs makes it possible to estimate the total volume deposited in the [0 to -20 m] zone as +7.8 X 10(6) m(3) (i.e. 0.88 m(3) m(-2)), which corresponds to 4 X 10(6) t of sediment. These values are compared with the average annual volume of 0.47 X 10(6) m(3) yr(-1) of sediment deposited in this zone between 1995 and 2003, as well as the average sediment load estimated at the Arles station (50 km upstream) for this flood event (3.1 x 10(6) t to 5.3 x 10(6) t). The acquisition of bathymetric measurements immediately before and after a major flood allows more than a simple morphological description; in addition, an analysis of the solid load transfer processes towards the prodelta is achievable. Three mechanisms are highlighted. Most of the material eroded in the channel and supplied to the delta front corresponds to fine sediment that drape homogeneously over the pre-flood morphology of the delta front. The transit of the coarsest sediment (primarily sand) is slowed down in the channel of the Rh6ne: this sediment builds up in relatively small areas, leading to the formation of gullies on the prodelta slope. The gullies have fixed positions and disappear gradually towards the west, following the progressive migration of the active band towards the east. These old features are not reactivated by floods occurring after their formation. During the flood, only a small volume of coarse sediment bypasses through the gullies, and the fine deposits are remobilised rapidly or compacted. Flood input concerns essentially the delta front, which traps 90% of the fluvial solid discharge between 0 and 20 m depth. The coarse prodelta supply is then due mainly to mass movements of unconsolidated material deposited beforehand on the top of the delta front. Consequently, the main nourishment of the prodelta does not occur directly during and/or immediately after a flood event, but is delayed by sediment being temporarily trapped on the delta front.
Marine Geology (0025-3227) (Elsevier), 2006-12 , Vol. 234 , N. 1-4 , P. 159-177

Droits : 2006 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-2304.pdf
DOI:10.1016/j.margeo.2006.09.025
http://archimer.ifremer.fr/doc/00000/2304/

Éditeur(s) : Springer
Résumé : The Golo Margin in eastern Corsica is dissected by four canyons and two gullies which fed turbidite systems. Study of the dispersal of surficial sediments and flow dynamic in the Golo system is based on Kullenberg and interface cores interpreted in relation to a previously published seismic dataset. Cores were described in detail and interpreted within a sedimentary and stratigraphic framework. During the last 42,000 years, gravity processes which occurred in the large systems with a canyon source were mainly slide-induced, differentiated turbulent surges and hyperpycnal flows. Processes occurring in the small system with a gully source are mainly hyperconcentrated and concentrated flows. Deposits from the Corsican Margin can intercalate with products of processes triggered on the Pianosa Ridge located in the eastern part of the basin. During relative sea-level lowstands or during periods of rapid or high-amplitude sea-level fall, only large canyons (South and North Golo) are supplied by carbonate-rich hyperconcentrated and concentrated flows which are channelled in incised valleys on the shelf. During periods of slow or low-amplitude sea-level fall and during sea-level rise, sediments are trapped on a shelf delta and intensely winnowed by shelf hydrodynamic processes. Sand-rich hyperconcentrated and concentrated flows occur. All the systems fed by a canyon are active simultaneously. Gullies form and are active only during periods of sea-level rise. During relative highstands of sea level (Holocene), all the system is draped by hemipelagic sediments. Relative sea-level changes and canyon location relative to river mouths have a strong influence on the nature of sediment input, and the initiation and type of gravity flows which, in turn, control morphology and geometry.
Geo-Marine Letters (0276-0460) (Springer), 2006-12 , Vol. 26 , N. 6 , P. 373-395

Droits : 2006 Springer
http://archimer.ifremer.fr/doc/2006/publication-3594.pdf
DOI:10.1007/s00367-006-0045-z
http://archimer.ifremer.fr/doc/00000/3594/

Éditeur(s) : Scientific Technical Research Council Turkey-tubitak
Résumé : In 2002, the Bosphorus outlet was mapped using an EM 300 multibeam echo-sounder together with a Chirp sonar system. This survey, carried out on board the Ifremer RV 'Le Suroit' in the frame of the BlaSON project, completes the data previously acquired directly at the mouth of the Bosphorus by Di Iorio et al. (1999) in the frame of a NATO SACLANT Undersea Research project using jointly the NATO RV Alliance, and the Turkish Navy Survey ship 'Cubuklu'. This acoustic imaging has identified a canyon system at the slope and a shallow marine fan, which contains shelf incisions extending the Istanbul Strait incision. Multibeam bathymetry, ultra-high resolution seismic profiling and coring correlations on this subaqueous fan area allowed reconstruction of morphology and patterns of sediment distribution indicative of high energy sediment transport processes. The discovery of a shallow water/shelf type fan directly off shore from the Bosphorus and connected to its outlet is consistent with the theories of sudden discharges of large volumes of water. Age dating obtained at the bottom of this subaqueous shelf fan yielded an age of 6700 yr C-14 BP (uncorrected age) for the first marine mollusc encountered at the base. This is in accordance with a last and abrupt reconnection of the Marmara Sea to the Black Sea. A detailed morphological map of the shelf and slope along with seismic profile interpretation and core correlation is presented here. A synthesis is proposed to explain the formation of this subaqueous fan and its relationship with the last connection between Black and Marmara seas aft er the Last Glacial Maximum. This interpretation can be summarized as follows: stage A corresponds to the first erosion surface seen on the shelf related to the Last Glacial Maximum low stand; stage B is the ravine surface onlapping to ca. -30, -40 m; stage C is a second erosional surface related to a sea level fall and eroding most of underlying Unit 1B; and stage D corresponds to the onset of the fan deposit during a period of high water run-off from the Black Sea entering from the Bosphorus. Avulsion branches show that this fan has been active for a long time.
Turkish Journal Of Earth Sciences (1300-0985) (Scientific Technical Research Council Turkey-tubitak), 2011 , Vol. 20 , N. 3 , P. 287-305

Droits : 2011 TÜBİTAK
http://archimer.ifremer.fr/doc/00036/14676/13677.pdf
http://archimer.ifremer.fr/doc/00036/14676/

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : The mechanical equilibrium of an orogenic wedge is maintained thanks to interactions between tectonic processes and surface processes. To better constrain the influence of erosion and sedimentation on the evolution of orogens, we performed a series of analogue models based on the tapered wedge principle, varying the amounts of erosion and sedimentation. The models develop by frontal accretion in the foreland basin and by simple underthrusting and subsequent underplating in the hinterland. The variations in rates of erosion and sedimentation strongly modify the extent, the morphology, the structures, the timing of development and the material paths in the different models. Under certain conditions, entire structural units can be formed and subsequently eroded out of the geological record, leading to important underestimations when restoring sections. Particles located in the converging lower-plate or in the upper-plate show complex uplift paths related to tectonic stages. The correlation between models and three Alpine tectonic cross-sections emphasizes the role of erosion and sedimentation on the dynamics and development of the orogen and adjacent Molasse basin. Along strike changes in the present structure of the orogen could be explained in part by differences in surface processes.
EISSN: 1777-5817

hal-00411140
https://hal.archives-ouvertes.fr/hal-00411140
DOI : 10.2113/gssgfbull.3.297

Éditeur(s) : HAL CCSD Coastal Education and Research Foundation, Inc.
Résumé : International audience
Morphodynamics of sandy, macrotidal, embayed beaches is complex because of the numerous physical processes interacting at the same location over a wide range of temporal scales. As most of these processes are controlled by beach morphology, dynamic feedbacks are generally observed between hydro- and morphodynamics. Investigating short-term processes is essential in order to improve long term morphological prediction. A key question is to understand how beach slope reacts to forcing conditions, in particular the response time of the beach profile, how long the transient state lasts. This study deals with the spatial and temporal responses of beach morphology to varying incident conditions. Here we report main observations, preliminary results and on-going investigations on the DYNATREZ1 field campaign, which was conducted in the framework of the National Observation Service Dynalit. Beach profiles are shown to adapt rapidly to forcing conditions, within two days, with more intense variations observed in the high tide swash zone. The presence of infragravity waves and their dissipation on the beach is highlighted. It is likely that the very large variability in beach slope observed over a single neapspring cycle is responsible for the accordingly large variability in wave skewness, asymmetry and breaking processes, and thus in sediment fluxes and morphological changes.
ICS 2016 Sydney
Sydney, Australia

hal-01254465
https://hal.archives-ouvertes.fr/hal-01254465
DOI : 10.2112/SI75-075.1

Éditeur(s) : HAL CCSD
Résumé : International audience
As subducting plates reach the base of the upper mantle, some appear to flatten and stagnate, while others seemingly go through unimpeded. This variable resistance to slab sinking has been proposed to affect long-term thermal and chemical mantle circulation. A review of observational constraints and dynamic models highlights that neither the increase in viscosity between upper and lower mantle (likely by a factor 20–50) nor the coincident endothermic phase transition in the main mantle silicates (with a likely Clapeyron slope of –1 to –2 MPa/K) suffice to stagnate slabs. However, together the two provide enough resistance to temporarily stagnate subducting plates, if they subduct accompanied by significant trench retreat. Older, stronger plates are more capable of inducing trench retreat, explaining why backarc spreading and flat slabs tend to be associated with old-plate subduction. Slab viscosities that are ∼2 orders of magnitude higher than background mantle (effective yield stresses of 100–300 MPa) lead to similar styles of deformation as those revealed by seismic tomography and slab earthquakes. None of the current transition-zone slabs seem to have stagnated there more than 60 m.y. Since modeled slab destabilization takes more than 100 m.y., lower-mantle entry is apparently usually triggered (e.g., by changes in plate buoyancy). Many of the complex morphologies of lower-mantle slabs can be the result of sinking and subsequent deformation of originally stagnated slabs, which can retain flat morphologies in the top of the lower mantle, fold as they sink deeper, and eventually form bulky shapes in the deep mantle.
ISSN: 1553-040X

hal-01571965
https://hal.archives-ouvertes.fr/hal-01571965
DOI : 10.1130/GES01476.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz lies astride the complex plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. We report on the results of recent bathymetric swathmapping and multi-channel seismic surveys carried out here. The seafloor is marked by contrasting morphological provinces, spanning the SW Iberian and NW Moroccan continental margins, abyssal plains and an elongate, arcuate, accretionary wedge. A wide variety of tectonic and gravitational processes appear to have shaped these structures. Active compressional deformation of the wedge is suggested by folding and thrusting of the frontal sedimentary layers as well as basal duplexing in deeper internal units. There is evidence for simultaneous gravitational spreading occurring upslope. The very shallow mean surface and basal slopes of the accretionary wedge (1° each) indicate a very weak decollement layer, geometrically similar to the Mediterranean Ridge accretionary complex. Locally steep slopes (up to 10°) indicate strongly focused, active deformation and potential gravitational instabilities. The unusual surface morphology of the upper accretionary wedge includes “raft-tectonics” type fissures and abundant sub-circular depressions. Dissolution and/or diapiric processes are proposed to be involved in the formation of these depressions.
ISSN: 0264-8172

insu-00401683
https://hal-insu.archives-ouvertes.fr/insu-00401683
DOI : 10.1016/j.marpetgeo.2007.11.008

Éditeur(s) : HAL CCSD
Résumé : The present PhD thesis is devoted to the numerical simulation and analysis of shear on cohesive granular materials. In the framework of the Contact Dynamics method, we developed a model of cohesive bonding, which mimics cohesion by cementation. This model involves three contact strength parameters (a tensile strength, a coefficient of sliding friction, and a coefficient of rolling friction) as well as a local criterion, which controls the creation and the breaking of cohesive bonds. All contacts are cohesive at the beginning of the numerical simulations, and contact rupture leads to an irreversible loss of tensile strength (debonding). We varied systematically the three contact strength parameters and studied their influence on the shear strength, the dilatancy, and the microstructure of the granular media. Our results show that internal friction and macroscopic tensile strength have different origins at the contact scale. We also find that the microstructure of the granular media, when sheared at the steady state (also known as the `critical state"), is strongly affected by the local coefficients of sliding and rolling friction. In particular, the mechanical role of the weak network changes with these two contact parameters, which results from the formation of a new structure of force transmission. On the other hand, we also applied the same numerical simulation method to the simulation of landslides. We developed a methodology, which takes into account the initial morphology of the hillslope, the strength of geomaterials, and a triggering factor, integrating in the same model the initiation and propagation phases of the landslide. To illustrate this methodology, we applied it to the simulation of a hypothetical example of avalanche triggered by the progressive rise of a water table.
Ce travail de thèse porte sur la modélisation numérique et l'analyse du cisaillement dans les milieux granulaires cohésifs. Dans le cadre de la méthode de la Dynamique des Contacts, nous avons développé un modèle de cohésion qui cherche à imiter la cohésion par cimentation. Ce modèle fait intervenir trois paramètres de résistance au niveau des contacts (une résistance à la traction, un coefficient de frottement de glissement, et un coefficient de frottement de roulement) ainsi qu'un critère de création et de rupture des liens cohésifs. Les contacts sont cohésifs au début des simulations et leur rupture entraîne la perte irréversible de la résistance à la traction. Nous avons fait varier les trois paramètres microscopiques et nous avons étudié leur influence dans la résistance au cisaillement, la dilatance, et la microstructure du milieu. Nos résultats montrent que le frottement interne et l'adhésion macroscopiques ont des origines microscopiques différentes. Nous observons aussi que la microstructure du milieu cisaillé à l'état stationnaire (aussi connu comme ``l'état critique") est fortement affectée par l'angle de frottement et la résistance au roulement au niveau des contacts. En particulier, le rôle mécanique du réseau faible change avec ces deux paramètres microscopiques, ce qui résulte de la formation d'une nouvelle structure de transmission de forces. D'autre part, nous avons appliqué cette méthode de simulation numérique à l'étude d'un processus naturel : les glissements de terrain. Nous avons développé une méthodologie qui tient compte de la morphologie initiale du système, de la résistance des géomatériaux, et d'un mécanisme de déclanchement, ce qui permet d'intégrer dans le même modèle les phases d'initiation et de propagation du glissement. Pour illustrer cette méthodologie, nous l'avons appliquée à la modélisation d'un exemple hypothétique d'avalanche déclenchée par la montée progressive du niveau d'une nappe d'eau.
https://tel.archives-ouvertes.fr/tel-00311303

tel-00311303
https://tel.archives-ouvertes.fr/tel-00311303
https://tel.archives-ouvertes.fr/tel-00311303/document
https://tel.archives-ouvertes.fr/tel-00311303/file/these_estrada.pdf

Éditeur(s) : Gauthier-Villars
Résumé : Echinoderms show phenotypic plasticity in which variation in environmental conditions elicit graded reaction norms of morphological change. With the sea urchin Strongylocentrotus purpuratus under laboratory conditions, decreases in available food caused decreases in dry weights of the gonad and gut coupled with increases in the mass of Aristotle's lantern and length of the demi-pyramids. Spine clipping caused increased spine growth as well as decreases in the gut and gonad masses. Survival rate remained unchanged over a range of feeding and clipping treatments. In the field, at Sunset Bay, Oregon, well-fed sea urchins, with relatively small demi-pyramids, showed survival rates similar to poorly fed sea urchins that had large demi-pyramids. The wide range of morphological change, coupled with the narrow range of-change in survival, suggests that morphological plasticity buffers survival and hence would increase fitness. Phenotypic plasticity shown by other sea urchins includes changes in the relative sizes of Aristotle's lantern in Diadema antillarum and Echinometra mathaei and seasonal variation in the density of pedicellariae in Echinus esculentus. Variation in body size of echinoids and asteroids in different habitats and variation in number of arms in crinoids also may be examples of adaptive plasticity. Seasonal atrophy of internal organs in the sea cucumber Parastichopus californicus has been interpreted as an adaptive response to food limitation but, given the nature of responses in other echinoderms, such an interpretation seems unlikely and the significance of seasonal atrophy of organs in holothurians remains unknown.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1996 , Vol. 19 , N. 3-4 , P. 347-355

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00094/20492/18187.pdf
http://archimer.ifremer.fr/doc/00094/20492/

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : We propose to assess the error done when temperature is considered as a conservative tracer in fluviokarst studies. As a matter of fact, heat exchanges occur between karstic Conduit System (CS) and Porous Fractured Matrix (PFM) that prevents from using this approximation without caution. The conservative tracer approximation boils down to consider the cooling of CS water by PFM flow in an open thermodynamic system where the CS is bounded by an Adiabatic Wall (AW). The resulting CS water temperature contrasts with the one obtained from more complete models (CW), which also take into account heat conduction within the CS, within the PFM, and from the CS to PFM through CS a Conductive Wall. In order to assess first orders of this error, the dimensionless equations, characteristic of CS cooling by PFM, have been solved thanks to Alternate Finite Difference Implicit methods both in AW and CW configurations. Four groups of dimensionless numbers appear in the various terms of energy and mass equations among which the Peclet and Reynolds numbers depict the large morphologic and hydrologic variability of natural karstic systems. A parametric exploration of the differences between AW and CW models has then been conducted vs. Peclet numbers (Pe numbers varying from 106 to 109, at constant CS Reynolds number) and vs. Reynolds numbers (Red varying from 103 to 107, at constant Peclet number). The error curves bound finite volumes in the Peclet–Reynolds space that converge uniformly to zero for the extreme values of these parameters. However, for Peclet and Reynolds numbers characteristic of realistic fluviokarst configurations, the errors reach finite values, that give first order information assessing the error done by considering temperatures as conservative tracers. Maximum relative errors around 10−2 (in fact 0.0092) have been found varying Pe; while it remained slightly lower than 0.7 × 10−2 varying Red. An illustrative example of the temperature conservative tracer AW approximation is presented with the data obtained from the main morphologic and hydrologic properties of the Cent–Font resurgence (Hérault, France). According to the results, the error reached at the output of the fluviokarst is 0.00613 (for Pe = 1.4993 × 108 and Red = 4.2969 × 104). When rescaled to the physical domain, this error leads to a temperature difference of 1.77 K between the CW and AW configurations.
ISSN: 1812-2108

hal-01358348
https://hal.archives-ouvertes.fr/hal-01358348
https://hal.archives-ouvertes.fr/hal-01358348/document
https://hal.archives-ouvertes.fr/hal-01358348/file/hessd-11-169-2014.pdf
DOI : 10.5194/hessd-11-169-2014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimental modelling applied to the study of orogenic wedge dynamics has been a subject of fruitful research for more than 30 years, although the technique dates back as far as the early XIXth century. On one hand, several first order parameters controlling the structural evolution of mountain belts have been intensively investigated using the classic tectonic "sandbox" models. The main parameters are the properties of the basal décollement, the deforming material, the backstop, and fluxes, kinematics and surface processes. On the other hand, the morphological evolution of a mountain relief subjected to changing tectonic or climatic forcing has been addressed using another kind of approach called "geomorphic" models. Nowadays, the literature is extremely rich, particularly for the sandbox technique, so that it becomes difficult to have an exhaustive view of the effects of the above parameters on mountain evolution. In this article, we propose a detailed review of the main results obtained using both "tectonic" and "geomorphic" approaches. Our goal is to provide an almost complete state-of-the-art in the experimental study of relief dynamics to guide present and future researchers in their understanding of mountain belt evolution.
ISSN: 0040-1951

hal-00757713
https://hal.archives-ouvertes.fr/hal-00757713
DOI : 10.1016/j.tecto.2012.01.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011