Éditeur(s) : The Royal Society
Résumé : One of the most ubiquitous and long-lasting recent changes to the surface of our planet is the accumulation and fragmentation of plastics. Within just a few decades since mass production of plastic products commenced in the 1950s, plastic debris has accumulated in terrestrial environments, in the open ocean, on shorelines of even the most remote islands and in the deep sea. Annual clean-up operations, costing millions of pounds sterling, are now organized in many countries and on every continent. Here we document global plastics production and the accumulation of plastic waste. While plastics typically constitute approximately 10 per cent of discarded waste, they represent a much greater proportion of the debris accumulating on shorelines. Mega- and macro-plastics have accumulated in the highest densities in the Northern Hemisphere, adjacent to urban centres, in enclosed seas and at water convergences ( fronts). We report lower densities on remote island shores, on the continental shelf seabed and the lowest densities (but still a documented presence) in the deep sea and Southern Ocean. The longevity of plastic is estimated to be hundreds to thousands of years, but is likely to be far longer in deep sea and non-surface polar environments. Plastic debris poses considerable threat by choking and starving wildlife, distributing non-native and potentially harmful organisms, absorbing toxic chemicals and degrading to micro-plastics that may subsequently be ingested. Well-established annual surveys on coasts and at sea have shown that trends in mega- and macro-plastic accumulation rates are no longer uniformly increasing: rather stable, increasing and decreasing trends have all been reported. The average size of plastic particles in the environment seems to be decreasing, and the abundance and global distribution of micro-plastic fragments have increased over the last few decades. However, the environmental consequences of such microscopic debris are still poorly understood.
Philosophical Transactions of the Royal Society B (0962-8436) (The Royal Society), 2009-07 , Vol. 364 , N. 1526 , P. 1985-1998

Droits : The Royal Society 2009
http://archimer.ifremer.fr/doc/2009/publication-6952.pdf
DOI:10.1098/rstb.2008.0205
http://archimer.ifremer.fr/doc/00000/6952/

Éditeur(s) : Elsevier Science Bv
Résumé : Coastal and estuarine systems provide nursery grounds for many marine fish species. Their productivity has been correlated with terrigeneous inputs entering the coastal-estuarine benthic food web, thereby favouring the establishment of fish juveniles. Studies in these ecosystems often describe the nursery as a single large habitat without verifying nor considering the presence of contiguous habitats. Our study aimed at identifying different habitats based on macrozoobenthic communities and morpho-sedimentary characteristics and assessing the trophic interactions between fish juveniles and their benthic preys within these habitats. It included 43 sampling sites covering 5 habitats in which we described taxonomically and quantitatively the invertebrates and fish communities with stable isotopes and gut contents. It suggested that the benthic common sole Solea solea displayed feeding plasticity at the population level, separating the juveniles (G0) from the older fish (G1) into different "feeding sub-populations". Size-based feeding plasticity was also observable in the spatial occupancy of that species in the studied bay. The demersal pouting, Trisopterus luscus, equally used the different habitats but displayed low feeding plasticity across and inside each habitat. Stable isotopes proved to be powerful tools to study the spatial distribution of trophic interactions in complex ecosystems like the bay of Vilaine and to define optimal habitats for fish that use the coastal-estuarine ecosystem as nursery grounds.
Journal Of Sea Research (1385-1101) (Elsevier Science Bv), 2013-08 , Vol. 81 , P. 40-48

Droits : 2013 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00151/26226/24327.pdf
DOI:10.1016/j.seares.2013.03.013
http://archimer.ifremer.fr/doc/00151/26226/

Éditeur(s) : HAL CCSD E Schweizerbart Science Publishers
Résumé : International audience
We present an electron tomography study of dislocations in deformed olivine single crystals, at ca. 0.5 T m, along two distinct orientations. The easiest slip systems are [001](100) and [001]{110}. Disorientating a single crystal away from easy glide conditions leads to massive cross-slip, which generates three-dimensional dislocations, and thus contributes to hardening. Fast motion of curved non-screw dislocation in those planes leaves long straight screw dislocations which bear lattice friction and control plastic strain. We have identified several hardening mechanisms. Non-screw [001] dislocations interact elastically to form dipoles. Recovery mechanisms leading to dipole annihilation are observed, but they are slow at those temperatures and produce numerous sessile loops. These loops represent obstacles for gliding dislocations. Interactions between dislocations and sessile loops produce sessile segments (super jogs), which efficiently impede dislocation motions.
ISSN: 0935-1221

hal-01277821
https://hal.archives-ouvertes.fr/hal-01277821
DOI : 10.1127/ejm/2015/0027-2481

Éditeur(s) : HAL CCSD Oldendorf/Luhe
Résumé : International audience
Non-calcifying photosynthetic anthozoans have emerged as a group that may thrive under high carbon dioxide partial pressure (pCO(2)) conditions via increased productivity. However, the physiological mechanisms underlying this potential success are unclear. Here we investigated the impact of high pCO(2) on the dissolved inorganic carbon (DIC) use in the temperate sea anemone Anemonia viridis. We assessed the impacts of long-term exposure to high pCO(2), i.e. sampling in situ natural CO2 vents (Vulcano, Italy), and short-term exposure, i.e. during a 3 wk controlled laboratory experiment. We focused on photo-physiological parameters (net photosynthesis rates, chlorophyll a content and Symbiodinium density) and on carbonic anhydrase (CA) activity, an enzyme involved in the energy-demanding process of DIC absorption. Long-term exposure to high pCO(2) had no impact on Symbiodinium density and chlorophyll a content. In contrst, short-term exposure to high pCO(2) induced a significant reduction in Symbiodinium density, which together with unchanged net photosynthesis resulted in the increase of Symbiodinium productivity per cell. Finally, in both in situ long-term and laboratory short-term exposure to high pCO(2), we observed a significant decrease in the CA activity of sea anemones, suggesting a change in DIC use (i.e. from an HCO3- to a CO2 user). This change could enable a shift in the energy budget that may increase the ability of non-calcifying photosynthetic anthozoans to cope with ocean acidification.
ISSN: 0171-8630

hal-01546163
https://hal.archives-ouvertes.fr/hal-01546163
DOI : 10.3354/meps11916

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
BACKGROUND: Phthalic acid esters are widely used in the manufacture of plastics. Numerous studies have shown that these phthalates impair testicular testosterone production in the rat. However, the scarce and contradictory data concerning humans have cast doubt over whether these compounds are also anti-androgenic in man. We therefore investigated the direct effects of di-(2-ethylhexyl) phthalate (DEHP) and mono-(2-ethylhexyl) phthalate (MEHP) on organo-cultured adult human testis and a human cell line. METHODS: Adult human testis explants or NCI-H295R adrenocortical human cells were cultured with DEHP or MEHP. The effects of ketoconazole, used as a reference molecule, were also assessed. RESULTS: In both models, DEHP and MEHP significantly inhibited testosterone production. The effects of both phthalates appeared to be specific for steroidogenesis, as INSL3 production by Leydig cells was not altered. Furthermore, the phthalates of interest had no effect on inhibin B production by Sertoli cells or on germ cell apoptosis. As only a small fraction of the phthalates added was found in the testis explants, and as these compounds were found to be metabolized, we estimate that the anti-androgenic effects observed occurred at concentrations of phthalates that are of the same order of magnitude as exposures reported in the literature for men. CONCLUSIONS: We provide the first evidence that DEHP and MEHP can inhibit testosterone production in the adult human testis. This is consistent with recent epidemiological findings of an inverse correlation between exposure to MEHP and testosterone concentrations.
ISSN: 0268-1161

hal-00876965
https://hal.archives-ouvertes.fr/hal-00876965
DOI : 10.1093/humrep/des069
PUBMED : 22402212

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Transmission electron microscopy observations on olivine crystals deformed at moderate (≤1273 K) temperature evidenced dislocations interactions explaining the hardening observed in the experiments, but also recovery mechanisms by the absorption or emission of point defects. Thus we investigate the possibility that, at geological strain-rates, these recovery processes allow steady-state deformation by dislocation creep at low to moderate temperatures in the lithospheric mantle. We test this hypothesis using a 2.5-D dislocation dynamics (DD) model, which combines dislocation glide and recovery by climb. This model shows that diffusion-controlled recovery processes allow for steady-state deformation by dislocation creep in the lithospheric mantle at stresses <500 MPa. For stresses of 50–200 MPa, steady-state strain-rates of 10−15 s−110−15 s−1 may be attained at temperatures as low as 900 K. Fitting of the DD model produces a flow law, which represents a lower bound for the lithospheric mantle strength, since the models describe the deformation of an olivine single crystal in an easy slip orientation. Comparison of strain-rates and Moho temperatures inferred for different geodynamic environments and the predictions of this model-based flow law implies, nevertheless, that, except in incipient rifts, most of the observed deformation may be produced by stress levels ≤200 MPa, consistent with those inferred to be produced by convection. This convergence suggests that the present models, which explicitly calculate the time-dependent dislocation dynamics, may provide a correct first order estimate of the mechanical behaviour of the lithospheric mantle, which cannot be derived directly from any existing data.
ISSN: 0012-821X

hal-01277178
https://hal.archives-ouvertes.fr/hal-01277178
https://hal.archives-ouvertes.fr/hal-01277178/document
https://hal.archives-ouvertes.fr/hal-01277178/file/Boioli.pdf
DOI : 10.1016/j.epsl.2015.10.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use a strike-slip fault analog model to study experimentally the role played by along-fault non-uniform and asymmetric applied normal stress on both coseismic slip and long-term fault behavior. Our model is based on a visco-elasto-plastic multi-layered rheology that allows to produce several hundreds of scaled analog microquakes and associated seismic cycles. Uniform or heterogeneous applied normal stress along the fault plane is imposed and maintained constant during the whole experiment durations. Our results suggest that coseismic slip patterns are strongly controlled by spatial normal stress variations and subsequent accumulated shear stress along fault strike. Major microquakes occur preferentially in zones of major shear stress asperities. Coseismic slip distributions exhibit a pattern similar to the along-fault applied normal stress distribution. The occurrence of isolated low to moderate microquakes where residual stresses persist around secondary stress asperities, indicates that stress conditions along the fault also control the whole variability of fault slip events. Moreover, when fault slip stability conditions are modulated by normal stress distribution, our experiments suggest that the along-fault stress heterogeneity influences the seismic cycle regularity and, consequently, long-term fault slip behavior. Uniform applied normal stress favors irregular seismic cycles and the occurrence of earthquakes clustering, whereas non-uniform normal stress with a single high amplitude stress asperity generates strong characteristic microquake events with stable return periods. Together our results strengthen the assumption that coseismic slip distribution and earthquake variability along an active fault may provide relevant information on long term tectonic stress and could thus improve seismic hazard assessment.
ISSN: 0012-821X

hal-01666379
https://hal.archives-ouvertes.fr/hal-01666379
DOI : 10.1016/j.epsl.2017.10.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The last step of oestrogen biosynthesis is catalyzed by the enzyme aromatase, the product of the cyp19a1 gene. In vertebrates, cyp19a1 is expressed in the brain resulting in a local oestrogen production that seems important not only for the control of reproduction-related circuits and sexual behaviour, but also for the regulation of neural development, synaptic plasticity and cell survival. In adult amphibians, the precise sites of expression of cyp19a1 in the brain have not been investigated which prevents proper understanding of its potential physiological functions. The present study aimed at examining the precise neuroanatomical distribution of cyp19a1 transcripts in adult brains of both male and female Xenopus. We found that cyp19a1 expression is highly regionalized in the brains of both sexes. The highest expression was found in the anterior part of the preoptic area and in the caudal hypothalamus, but significant levels of cyp19a1 transcripts were also found in the supraoptic paraventricular and suprachiasmatic areas, and in brain regions corresponding to the septum, bed nucleus of the stria terminalis and amygdala. Importantly, no obvious difference between male and female Xenopus was detected at the level of cyp19a1 transcripts. Additionally, in the brain of adult Xenopus, cyp19a1 transcripts were detected in neurons, and not in glial cells. These data and those available in other vertebrates on cyp19a1/aromatase expression suggest that, with the intriguing exception of teleost fishes, cyp19a1 was under strong evolutionary conservation with respect to its sites of expression and the nature of the cells in which it is expressed
ISSN: 0016-6480

hal-01187140
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01187140
DOI : 10.1016/j.ygcen.2015.08.008
PUBMED : 26255686

Éditeur(s) : HAL CCSD Endocrine Society
Résumé : International audience
Sertoli cells (SCs), the only somatic cells within seminiferous tubules, associate intimately with developing germ cells. They not only provide physical and nutritional support but also secrete factors essential to the complex developmental processes of germ cell proliferation and differentiation. The SC transcriptome must therefore adapt rapidly during the different stages of spermatogenesis. We report comprehensive genome-wide expression profiles of pure populations of SCs isolated at 5 distinct stages of the first wave of mouse spermatogenesis, using RNA sequencing technology. We were able to reconstruct about 13 901 high-confidence, nonredundant coding and noncoding transcripts, characterized by complex alternative splicing patterns with more than 45% comprising novel isoforms of known genes. Interestingly, roughly one-fifth (2939) of these genes exhibited a dynamic expression profile reflecting the evolving role of SCs during the progression of spermatogenesis, with stage-specific expression of genes involved in biological processes such as cell cycle regulation, metabolism and energy production, retinoic acid synthesis, and blood-testis barrier biogenesis. Finally, regulatory network analysis identified the transcription factors endothelial PAS domain-containing protein 1 (EPAS1/Hif2α), aryl hydrocarbon receptor nuclear translocator (ARNT/Hif1β), and signal transducer and activator of transcription 1 (STAT1) as potential master regulators driving the SC transcriptional program. Our results highlight the plastic transcriptional landscape of SCs during the progression of spermatogenesis and provide valuable resources to better understand SC function and spermatogenesis and its related disorders, such as male infertility.
ISSN: 0888-8809

hal-01146846
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01146846
DOI : 10.1210/me.2014-1356
PUBMED : 25710594

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The seismic anisotropy of the deep Earth is reviewed as a profile from the upper mantle to the solid inner core at the centre of the Earth. The upper mantle is by far the most anisotropic region of the Earth, followed the D” layer above the core mantle boundary. In contrast it is shown that many minerals that are present in the upper mantle, transition zone, lower mantle, D” layer and solid inner core are elastically anisotropic to different degrees. The anisotropy of hydrous phases present in subduction zones is briefly introduced. The basic concepts of single crystal and polycrystalline elasticity and the extrapolation of elastic properties to high temperature and pressure are presented. The specific features of elastic wave propagation in an anisotropic medium of any arbitrary symmetry are illustrated using mantle and inner core phases. The roles of crystal preferred orientation, water and melt in producing seismic anisotropy in the upper mantle are discussed.
Treatese of Geophysics, vol.2

hal-00408321
https://hal.archives-ouvertes.fr/hal-00408321
DOI : 10.1016/B978-044452748-6.00045-6

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B1 - Oxford Open Option B Oxford University Press (OUP)
Résumé : International audience
BACKGROUNDA very large proportion of the literature on the endocrine disruptors categorized as anti-androgens deals with phthalates, which are produced in large amounts for use as plastic emollients and additives. In this review, we bring together and analyse work on the effects of phthalates in animals and humans at different stages of their development to assess whether or not their possible anti-androgenic properties represent a significant threat to human health.METHODSThe database PubMed was systematically searched for all English language articles until July 2013 in each subject area discussed.RESULTSWe provide an up-to-date exhaustive, comparative and critical assessment of both in vivo and in vitro studies undertaken to explore the effects of phthalates on the human testis from fetal life to adulthood. These results are compared and discussed in the light of the key data reported in the literature for mice and rats.CONCLUSIONSThe current literature highlights the fact that (i) there is a huge difference between the number of studies performed in animals and in humans, with many fewer for humans; (ii) there are differences in the way rats, mice, primates and humans respond to phthalates, for reasons that need to be further explored; (iii) more work is required to clarify the contradictions, in the few existing human epidemiological studies at all stages of development, which may be partly explained by varying methods of exposure assessment; (iv) in accordance with recent findings in rodents, it cannot be excluded that transgenerational effects of phthalates and/or epigenetic changes exist in humans; (v) a number of methodological limitations need to be solved for the in vitro and xenografting models using human fetal testis to fulfil their 'missing link' role between epidemiological studies in humans and rodent models; and (vi) epidemiological and in vitro studies generally converge sufficiently to conclude that phthalate anti-androgenicity is plausible in adult men.
ISSN: 1355-4786

inserm-00869540
http://www.hal.inserm.fr/inserm-00869540
DOI : 10.1093/humupd/dmt050
PUBMED : 24077978

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We developed a new granular material (MatIV) to study experimentally landscape evolution in active mountain belt piedmonts. Its composition and related physical properties have been determined using empirical criteria derived from the scaling of deformation, erosion-transport and sedimentation natural processes. MatIV is a water-saturated composite material made up with 4 granular components (silica powder, glass microbeads, plastic powder and graphite) whose physical, mechanical and erosion-related properties were measured with different laboratory tests. Mechanical measurements were made on a modified Hubbert-type direct shear apparatus. Erosion-related properties were determined using an experimental set-up that allows quantifying the erosion/sedimentation budget from tilted relaxation topographies. For MatIV, we also investigated the evolution of mean erosion rates and stream power erosion law exponents in 1D as a function of slope.;Our results indicate that MatIV satisfies most of the defined criteria. It deforms brittlely according to the linear Mohr-Coulomb failure criterion and localizes deformation along discrete faults. Its erosion pattern is characterized by realistic hillslope and channelized processes (slope diffusion, mass wasting, channel incision). During transport, eroded particles are sorted depending on their density and shape, which results in stratified alluvial deposits displaying lateral fades variations. To evaluate the degree of similitude between model and nature, we used a new experimental device that combines accretionary wedge deformation mechanisms and surface runoff erosion processes. Results indicate that MatIV succeeded in producing detailed morphological and sedi-mentological features (drainage basin, channel network, terrace, syntectonic alluvial fan). Geometric, kinematic and dynamic similarity criteria have been investigated to compare precisely model to nature. Although scaling is incomplete, it yields particularly informative orders of magnitude. With all these characteristics, MatIV appears as a very promising material to investigate experimentally a wide range of scientific questions dealing with relief dynamics and interactions between tectonics, erosion and sedimentation processes.
ISSN: 0040-1951

hal-00669904
https://hal.archives-ouvertes.fr/hal-00669904
DOI : 10.1016/j.tecto.2011.09.029

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Dehydration reactions result in minerals’ replacement and a transient fluid-filled porosity. These reactions involve interface-coupled dissolution–precipitation and might therefore lead to fixed crystallographic orientation relations between reactant (protolith) and product phases (i.e. topotaxy). We investigate these two phenomena in the dehydration of a foliated antigorite (atg) serpentinite by comparing the crystallographic preferred orientation (CPO) developed by olivine (ol), orthopyroxene (opx) and chlorite (chl) during high-pressure antigorite and chlorite dehydration in piston-cylinder experiments and in natural samples recording the dehydration of antigorite (Cerro del Almirez, Betic Cordillera, Spain). Experiments were performed under undrained conditions resulting in fluid-filled porosity and in strong CPO of the prograde minerals, controlled by the pre-existing antigorite CPO in the reactant foliated serpentinite. The orientation of a ol,opx and c∗chl is parallel to c∗atg from the protolith. The Cerro del Almirez samples show similar, locally well-developed topotactic relations between orthopyroxene, chlorite and antigorite, but the product CPOs are weaker and more complex at the thin section scale. In contrast to the experiments, olivine from natural samples shows a weak correlation between b ol and the former c∗atg. We relate the strengthening of local topotactic relations and the weakening of the inherited CPO at a larger scale in natural samples to compaction and associated fluid migration. Microstructural features that might be related to compaction in the natural samples include: (1) smooth bending of the former foliation, (2) gradual crystallographic misorientation (up to 16°) of prismatic orthopyroxene due to buckling by dislocation creep, (3) inversion of enstatite to low clinoenstatite (P21/c) along lamellae and (4) brittle fracturing of prismatic orthopyroxene enclosed by plastically deformed chlorite. The coexistence of orthopyroxene buckling and clinoenstatite lamellae enables estimating the local strain rates and shear stresses generated during compaction. An lower bound for the strain rates in the order of 10−12 to 10−13 s−1 and shear stresses of 60–70 MPa are estimated based on creep data. Lower shear stresses (20–40 MPa) are retrieved using a theoretical approach. These data point to slow compaction (and fluid extraction) in nature if the system is not perturbed by external forces, with rates only marginally higher than the viscoplastic deformation of the solid matrix.
ISSN: 0010-7999

hal-01174158
https://hal.archives-ouvertes.fr/hal-01174158
DOI : 10.1007/s00410-015-1129-4

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Quartz is a common crustal mineral that deforms plastically in a wide range of temperatures and pressures, leading to the development of different types of crystallographic preferred orientation (CPO) patterns. In this contribution we present the results of an extensive modeling of quartz fabric transitions via a viscoplastic self-consistent (VPSC) approach. For that, we have performed systematic simulations using different sets of relative critical resolved shear stress of the main quartz slip systems. We have performed these simulations in axial compression and simple shear regimes under constant Von Mises equivalent strain of 100% (γ = 1.73), assuming that the aggregates deformed exclusively by dislocation glide. Some of the predicted CPOs patterns are similar to those observed in naturally and experimentally deformed quartz. Nevertheless, some classical CPO patterns usually interpreted as result from dislocation glide (e.g. Y-maxima due to prism < a > slip) are clearly not developed in the simulated conditions. In addition we reported new potential preferred orientation patterns that might happen in high temperature conditions, both in axial compression and simple shear. We have demonstrated that CPOs generated under axial compression are usually stronger that those predicted under simple shear, due to the continuous rotation observed in the later simulations. The fabric strength depends essentially on the dominant active slip system, and normally the stronger CPOs result from dominant basal slip in < a >, followed by rhomb < a > and prism [c] slip, whereas prism < a > slip does not produce strong fabrics. The opening angle of quartz [0001] fabric used as a proxy of temperature seems to be reliable for deformation temperatures of ~ 400 °C, when the main slip systems have similar behaviors.
ISSN: 0040-1951

hal-01115674
https://hal.archives-ouvertes.fr/hal-01115674
DOI : 10.1016/j.tecto.2014.08.011