Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
A relevant and accurate description of three-dimensional (3D) protein structures can be achieved by characterizing recurrent local structures. In a previous study, we developed a library of 120 3D structural prototypes encompassing all known 11-residues long local protein structures and ensuring a good quality of structural approximation. A local structure prediction method was also proposed. Here, overlapping properties of local protein structures in global ones are taken into account to characterize frequent local networks. At the same time, we propose a new long local structure prediction strategy which involves the use of evolutionary information coupled with Support Vector Machines (SVMs). Our prediction is evaluated by a stringent geometrical assessment. Every local structure prediction with a Calpha RMSD less than 2.5 A from the true local structure is considered as correct. A global prediction rate of 63.1% is then reached, corresponding to an improvement of 7.7 points compared with the previous strategy. In the same way, the prediction of 88.33% of the 120 structural classes is improved with 8.65% mean gain. 85.33% of proteins have better prediction results with a 9.43% average gain. An analysis of prediction rate per local network also supports the global improvement and gives insights into the potential of our method for predicting super local structures. Moreover, a confidence index for the direct estimation of prediction quality is proposed. Finally, our method is proved to be very competitive with cutting-edge strategies encompassing three categories of local structure predictions. Proteins 2009. (c) 2009 Wiley-Liss, Inc.
ISSN: 0887-3585

inserm-00348740
http://www.hal.inserm.fr/inserm-00348740
http://www.hal.inserm.fr/inserm-00348740/document
http://www.hal.inserm.fr/inserm-00348740/file/Bornot_Proteins_2009_preprint_version.pdf
http://www.hal.inserm.fr/inserm-00348740/file/inserm-00348740_edited.pdf

Éditeur(s) : Elsevier
Résumé : High P-wave velocities (7.1-7.8 km/s) lower crustal bodies (LCBs) imaged along volcanic margins are commonly interpreted as plume and break-up-related thick mafic underplating. This interpretation is partly challenged in this paper based on new seismic observations and modelling of the outer Voring Basin (Norway). An exceptional strong amplitude reflection, the T Reflection, is particularly well defined below the North Gjallar Ridge (NGR) between 7 and 8 s TWT. The T Reflection is located near the volcanic lava flows emplaced during the NE Atlantic breakup (similar to 55-54 Ma ago) and coincides with the top of the LCB, forming a mid-crustal dome. Based on structural and temporal relationships, we show that the dome clearly influences the structural development of the NGR and predates the continental breakup at least by 10-15 Ma. Using a thermo-kinematical model, we tried also to investigate and quantify the relationships between the extension, LCB and the magmatic production. Modelling suggests that significant Paleocene-Early Eocene magmatism can be produced without any temperature anomaly in the mantle if differential stretching occurs during the break-up initiation. The conclusion of 2D thermo-kinematical parametric analysis is that the magmatic model predicts, either little extension (beta < 2) with no melting or high extension (beta > 5) with significant melting along the outer Voring Basin. We suggest that the continental part of the LCB could not necessarily be breakup-related and so magmatic, as has often been stated previously. It is concluded here that the continental part of the LCB observed beneath the outer Voring Basin may be partly (or fully) attributed to inherited, high-pressure granulite/eclogite lower crustal rocks. The real amount of mafic material emplaced along the outer Voring Basin could be 20-40% less than thought.
Tectonophysics (0040-1951) (Elsevier), 2006 , Vol. 412 , N. 3-4 , P. 255-278

Droits : 2005 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-1042.pdf
DOI:10.1016/j.tecto.2005.10.038
http://archimer.ifremer.fr/doc/00000/1042/

Éditeur(s) : Springer
Résumé : Batch culture experiments using viral enrichment were conducted to test the response of a coastal bacterial community to autochthonous (i.e., co-existing) or allochthonous riverine viruses. The effects of viral infections on bacterial dynamics and activity were assessed by epifluorescence microscopy and thymidine incorporation, respectively, whereas the effect of viral infection on bacterial community composition was examined by polymerase chain reaction-single strand conformation polymorphism 16S ribosomal RNA fingerprinting. The percentages of high nucleic acid-containing cells, evaluated by flow cytometry, were significantly correlated (r (2) = 0.91, n = 12, p < 0.0001) to bacterial production, making this value a good predictor of active cell dynamics along the study. While confinement and temperature were the two principal experimental factors affecting bacterial community composition and dynamics, respectively, additions of freshwater viruses had significant effects on coastal bacterial communities. Thus, foreign viruses significantly reduced net bacterial population increase as compared to the enrichment treated with inactivated virus. Moreover, freshwater viruses recurrently and specifically affected bacterial community composition, as compared to addition of autochthonous viruses. In most cases, the combined treatment viruses and freshwater dissolved organic matter helped to maintain or even enhance species richness in coastal bacterial communities in agreement to the 'killing the winner' hypothesis. Thus, riverine virus input could potentially influence bacterial community composition of the coastal bay albeit with modest modification of bulk bacterial growth.
Microbial Ecology (0095-3628) (Springer), 2009-02 , Vol. 57 , N. 2 , P. 295-306

Droits : 2009 Springer
http://archimer.ifremer.fr/doc/2009/publication-6636.pdf
DOI:10.1007/s00248-008-9428-1
http://archimer.ifremer.fr/doc/00000/6636/

Éditeur(s) : HAL CCSD Elsevier
Résumé : Vegetation phenology is the study of the timing of seasonal events that are considered to be the result of adaptive responses to climate variations on short and long time scales. In the field of remote sensing of vegetation phenology, phenological metrics are derived from time series of optical data. For that purpose, considerable effort has been specifically focused on developing noise reduction and cloud-contaminated data removal techniques to improve the quality of remotely-sensed time series. Comparative studies between time series composed of satellite data acquired under clear and cloudy conditions and from radiometric data obtained with high accuracy from ground-based measurements constitute a direct and effective way to assess the operational use and limitations of remote sensing for predicting the main plant phenological events. In the present paper, we sought to explicitly evaluate the potential use of MODerate resolution Imaging Spectroradiometer (MODIS) remote sensing data for monitoring the seasonal dynamics of different types of vegetation cover that are representative of the major terrestrial biomes, including temperate deciduous forests, evergreen forests, African savannah, and crops. After cloud screening and filtering, we compared the temporal patterns and phenological metrics derived from in situ NDVI time series and from MODIS daily and 16-composite products. We also evaluated the effects of residual noise and the influence of data gaps in MODIS NDVI time series on the identification of the most relevant metrics for vegetation phenology monitoring. The results show that the inflexion points of a model fitted to a MODIS NDVI time series allow accurate estimates of the onset of greenness in the spring and the onset of yellowing in the autumn in deciduous forests (RMSE <= one week). Phenological metrics identical to those provided with the MODIS Global Vegetation Phenology product (MDC12Q2) are less robust to data gaps, and they can be subject to large biases of approximately two weeks or more during the autumn phenological transitions. In the evergreen forests, in situ NDVI time series describe the phenology with high fidelity despite small temporal changes in the canopy foliage. However, MODIS is unable to provide consistent phenological patterns. In crops and savannah, MODIS NDVI time series reproduce the general temporal patterns of phenology, but significant discrepancies appear between MODIS and ground-based NDVI time series during very localized periods of time depending on the weather conditions and spatial heterogeneity within the MODIS pixel. In the rainforest, the temporal pattern exhibited by a MODIS 16-day composite NDVI time series is more likely due to a pattern of noise in the NDVI data structure according to both rainy and dry seasons rather than to phenological changes. More investigations are needed, but in all cases, this result leads us to conclude that MODIS time series in tropical rainforests should be interpreted with great caution. (C) 2013 Elsevier Inc. All rights reserved.
ISSN: 0034-4257

hal-01032407
https://hal.archives-ouvertes.fr/hal-01032407
DOI : 10.1016/j.rse.2013.01.010

Éditeur(s) : HAL CCSD
Résumé : When the upper crust below the mountain ranges shows crustal extension with a direction collinear to the convergence direction, it is generally accepted that it is the result of gravitational collapse. However, recent studies challenge this paradigm by showing that erosion induces uplift and extension in the central part of the low convergent mountain ranges. In this study, we investigate the impact of denudation on the seismotectonic regime of mountain ranges.In order to identify a relationship between seismotectonic regime and erosion, the first part of this work presents a compilation of data in the mountain ranges. Based on these observations, a simple kinematic model is proposed to predict the seismotectonic regime of the study ranges.For low convergence rate and moderate mean elevation ranges, this model predicts an extension regime when the denudation rate is 15% higher than the convergence rate.The second part is devoted to the development of thermomechanical 2D finite element models to study the impact of surface processes on the deformation of the Pyrenees. The results show that the isostatic response to erosion reactivates pre-existing structures. The kinematics of an inherited fault plane can be predicted due to the gradient of the horizontal surface velocity profile. Thus, a plane located in the eroded zone is reactivated in normal fault when near the border of the erosion area, this same plane is reactivated in reverse fault. These results suggest that the current deformation in the North Pyrenean Zone could be the result of surface processes.Given the small number of studies quantifying erosion rates in the Pyrenees, the models developed in the second part suffer from high uncertainty. To remedy this, we study the central Pyrenees through a study that combines two types of data : watershed denudation rates from cosmogenic isotopes concentration, and incision rates from sediments buried in the karst. These results are presented in chapter 3. Denudation profiles obtained are consistent with reactivation of a normal fault plane located in the North Zone of the Central Pyrenees.From our study in the Pyrenees, a good correlation appears between the value of the rate of erosion and the glacier occupation. Given that the glaciers where more developed in the Alps, it raises the question of the impact of the late-würmian deglaciation on the present deformation of this range. A numerical model detailing this relationship is presented in the fourth chapter. Theresults show that deglaciation of the western Alps is controlled by the rheological heterogeneity of the crust. Some of our models predict uplift rates consistent with those highlighted by geodesy.
Lorsque l’extension de la croûte sous les parties hautes des chaînes de montagnes est colinéaire à la direction de convergence, il est traditionnellement admis que le moteur est l’effondrement gravitaire. Pourtant, des études récentes remettent en cause ce paradigme en montrant que l’érosion induit un soulèvement et de l’extension dans la partie centrale des chaînes de montagne à faible taux de convergence. L’objectif de notre étude est d’étudier l’impact de la dénudation de la topographie sur le régime sismo-tectonique des chaînes de montagnes.La première partie de ce travail présente une compilation de données dans les chaînes de montagnes afin de dégager des relations entre régime sismo-tectonique et érosion. Sur la base de ces observations, un modèle cinématique simple permettant de prévoir le régime de la chaîne est proposé. Ainsi, pour les chaînes à faible taux de convergence et d’élévation moyenne, ce modèleprédit de l’extension lorsque le taux de dénudation est 15% plus élevé que le taux de convergence.La deuxième partie est consacrée au développement d’un modèle thermo-mécanique 2D en éléments finis pour étudier l’impact des processus de surface sur la déformation des Pyrénées.Les résultats montrent que la réponse isostatique à l’érosion permet de réactiver des structurespré-existantes. La cinématique d’un plan de faille hérité peut être prédite grâce au gradient du profil des vitesses de surface horizontales. Ainsi, un plan situé dans la zone d’érosion est réactivé en faille normale alors qu’en bordure de cette zone une faille est réactivée en régime inverse. Ces résultats suggèrent que la déformation actuelle des Pyrénées pourrait être la conséquence d’unprocessus d’érosion.Compte tenu du faible nombre d’études quantifiant les taux d’érosion dans les Pyrénées, les modèles développés dans la deuxième partie souffrent d’une forte incertitude. Pour y remédier, nous avons cherché à les quantifier dans les Pyrénées Centrales grâce à une étude qui combine deux types de données : taux de dénudation des bassins versants à partir des isotopes cosmogéniques, et vitesses d’incision à partir des sédiments piégés dans les karsts. Ces résultats sontprésentés dans la troisième partie. Les profils de dénudation obtenus sont compatibles avec unrejeu en faille normale d’un plan situé dans la Zone Nord Pyrénéenne des Pyrénées Centrales.Notre étude dans les Pyrénées, montre une bonne corrélation entre la valeur du taux d’érosion et la cartographie de l’occupation glaciaire. Les glaciers ayant été plus développés dans les Alpes, cela pose la question de l’impact de la déglaciation tardi-Wurmienne sur la déformation actuelle de cette chaîne. Un modèle numérique détaillant cette relation est présenté dans le quatrième chapitre. Les résultats montrent que la déglaciation des Alpes occidentales est contrôléepar l’hétérogénéité rhéologique de la croute. Certains de nos modèles prédisent des vitesses de surrection compatibles avec celles mises en évidence par la géodésie.
https://hal.archives-ouvertes.fr/tel-01262333

tel-01262333
https://hal.archives-ouvertes.fr/tel-01262333
https://hal.archives-ouvertes.fr/tel-01262333/document
https://hal.archives-ouvertes.fr/tel-01262333/file/these-Genti-2015-postjury.pdf

Éditeur(s) : HAL CCSD American Diabetes Association
Résumé : International audience
OBJECTIVE: To compare incidences and risk factors for diabetes using seven definitions, with combinations of pharmacological treatment, fasting plasma glucose (FPG) ≥7.0 mmol/L, and HbA(1c) ≥6.5%. RESEARCH DESIGN AND METHODS: Participants aged 30-65 years from the Data from an Epidemiological Study on the Insulin Resistance Syndrome (DESIR) cohort were followed for 9 years. RESULTS: More men had incident diabetes as defined by FPG ≥7.0 mmol/L and/or treatment than by HbA(1c) ≥6.5% and/or treatment: 7.5% (140/1,867) and 5.3% (99/1,874), respectively (P < 0.009); for women incidences were similar: 3.2% (63/1,958) and 3.4% (66/1,954). Known risk factors predicted diabetes for almost all definitions. Among those with incident diabetes by FPG alone versus HbA(1c) alone, there were more men (78 vs. 35%), case patients were 8 years younger, and fewer were alcohol abstainers (12 vs. 35%) (all P < 0.005). A diabetes risk score discriminated well between those with and without incident diabetes for all definitions. CONCLUSIONS: In men, FPG definitions yielded more incident cases of diabetes than HbA(1c) definitions, in contrast with women. An FPG-derived risk score remained relevant for HbA(1c)-defined diabetes.
Diabetes Care

inserm-00739799
http://www.hal.inserm.fr/inserm-00739799
http://www.hal.inserm.fr/inserm-00739799/document
DOI : 10.2337/dc10-1581
PUBMED : 21346181

Éditeur(s) : HAL CCSD American Society for Biochemistry and Molecular Biology
Résumé : International audience
Background: We used evolutionary analysis of alkaline phosphatase (tissue nonspecific alkaline phosphatase, TNSALP) to predict missense mutations leading to hypophosphatasia. Results: We found 469 sensitive positions and validated 99% of the 204 known mutations. Conclusion: It is a more powerful method than in silico models to validate missense mutations in TNSALP. Significance: Such an approach should be widely used to support genetic diagnostics. ALPL encodes the tissue nonspecific alkaline phosphatase (TNSALP), which removes phosphate groups from various substrates. Its function is essential for bone and tooth mineralization. In humans, ALPL mutations lead to hypophosphatasia, a genetic disorder characterized by defective bone and/or tooth mineralization. To date, 275 ALPL mutations have been reported to cause hypophosphatasia, of which 204 were simple missense mutations. Molecular evolutionary analysis has proved to be an efficient method to highlight residues important for the protein function and to predict or validate sensitive positions for genetic disease. Here we analyzed 58 mammalian TNSALP to identify amino acids unchanged, or only substituted by residues sharing similar properties, through 220 millions years of mammalian evolution. We found 469 sensitive positions of the 524 residues of human TNSALP, which indicates a highly constrained protein. Any substitution occurring at one of these positions is predicted to lead to hypophosphatasia. We tested the 204 missense mutations resulting in hypophosphatasia against our predictive chart, and validated 99% of them. Most sensitive positions were located in functionally important regions of TNSALP (active site, homodimeric interface, crown domain, calcium site, ...). However, some important positions are located in regions, the structure and/or biological function of which are still unknown. Our chart of sensitive positions in human TNSALP (i) enables to validate or invalidate at low cost any ALPL mutation, which would be suspected to be responsible for hypophosphatasia, by contrast with time consuming and expensive functional tests, and (ii) displays higher predictive power than in silico models of prediction.
ISSN: 0021-9258

hal-01545479
https://hal.archives-ouvertes.fr/hal-01545479
DOI : 10.1074/jbc.M114.576843

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The brittle to ductile transition (BDT) in rocks may strongly influence their transport properties (i.e., permeability, porosity topology ...) and the maximum depth and temperature where hydrothermal fluids may circulate. To examine this transition in the context of Icelandic crust, we conducted deformation experiments on a glassy basalt (GB) and a glass-free basalt (GFB) under oceanic crust conditions. Mechanical and micro-structural observations at a constant strain rate of 10(-5) s(-1) and at confining pressure of 100-300 MPa indicate that the rocks are brittle and dilatant up to 700-800 degrees C. At higher temperatures and effective pressures the deformation mode becomes macroscopically ductile, i.e., deformation is distributed throughout the sample and no localized shear rupture plane develops. The presence of glass is a key component reducing the sample strength and lowering the pressure of the BDT. In the brittle field, strength is consistent with a Mohr-Coulomb failure criterion with an internal coefficient of friction of 0.42 for both samples. In the ductile field, strength is strain rate-and temperature-dependent and both samples were characterized by the same stress exponent in the range 3 < n < 4.2 but by very different activation energy Q(GB) = 59 +/- 15 KJ/mol and Q(GFB) = 456 +/- 4 KJ/mol. Extrapolation of these results to the Iceland oceanic crust conditions predicts a BDT at similar to 100 degrees C for a glassy basalt, whereas the BDT might occur in non-glassy basalts at deeper conditions, i.e., temperatures higher than 550 +/- 100 degrees C, in agreement with the Icelandic seismogenic zone.
ISSN: 0148-0227

hal-00760905
https://hal.archives-ouvertes.fr/hal-00760905
DOI : 10.1029/2011JB008884

Résumé : 1 - Study's goals review The management of Norway Lobster and Hake fisheries can be considered as the most important issue in the Gascogne gulf. Calculation methods used to evaluate prediction variations under various efforts and mesh constraints all pinpoint to the crucial role narrow mesh fishing plays in Hakes' Northern stock status. The involvement of Gascogne gulf Norway Lobster fisheries regarding Hakes over exploitation seems over dimensioned when comparing the size of both of these stocks. Hake stocks spread from Northern Great Britain to Northern Spain, while Norway Lobster stocks are located in the Gascogne gulf's mud flats. The biological solution is well known and consists in globally increasing mesh nets to 80mm which would bring up Hakes yield to its most. It would be unreal to pretend all parties involved in Hake stocks will come to use them. For now, it is mostly an economical issue since many vessels continue on with an exploitation scheme dating from the 60's and fish on coastal mud flats which are the most exploited zones and where their catch is detrimental to juvenile class Hakes and Norway Lobsters. Considering our limited time, this study will cover bio- economical modelisation preparation. You will therefore find a description of fisheries and an exploitation assessment based on 1986's available data. 2 - Accomplished work 2. 1 Fishery description Presenting the problems and preparing ulterior analyses was first and foremost. Norway Lobster vessels supposedly, according to evaluation models used, test immature Hakes in such a manner that all stock exploitation is jeopardized. Norway Lobster distribution is closely linked to the nature of the ocean floor since it can only build its habitat on fine sediment. Hakes' habitat is not as restrictive and is linked to food supply, especially euphausiid shrimps, so they can be found on sandy and sandy-sedimental floors. Norway Lobsters are sought by a fleet of 400 to 450 ships which characteristics widely vary according to their home port. On the northern part, fisheries are close to exploitation ports where Norway Lobsters and miscellaneous catch yield is sufficient to support an older fleet. On the southern part, the structure is diversified and flexibility usually rules, more modern vessels can easily switch their target on a seasonal or daily basis. Globally, Hakes' northern stocks are slightly on the rise. This rise is probably due to global mesh size increase, even if slight and a decrease on fishing effort where immature species are caught. Norway Lobster stocks unloading is stable or slightly lower and yields, as far as northern fishery are concerned, vary and oscillate between ±15 to ±20 % at about an average of 100 kg/day. Biological parameters used in the evaluations for each species are those used in CIEM and CEE work cells. Among those parameters, those describing growth are the greatest. For Hakes, an intermediary growth equation between males and females has been used. For Norway Lobsters, both sexes are treated separately. Simulations were carried out according to 3 types of data: Norway Lobster vessels fishing effort variations. Norway Lobster vessels mesh increase. Norway Lobster vessels fishing effort decrease or mesh increasing go along in the same direction for Hake and Norway Lobster stock production (chart A and B). Lastly, a brief study on results evaluation significance was done to modify: - the size of Hake rejects by Norway Lobster vessels. The range of sizes stays the same but the amount in each class varies according to the same percentage. - Norway Lobsters growth parameters, both values used (L» = 76 mm and k = 0.11 for males, L°° = 56 mm and k = 0.14 for females) representing the "high" hypothesis. In the first case, a 20% error rate for rejects evaluation with 60 mm mesh would only bring a 3% modification rate on global stock production. Those first results are contradicting usual evaluation conclusions and it will be necessary to recalculate by modifying the size class step. In the second case, to decrease L» and increase growth speed, in time production variations remain within usual inter annual fluctuations. In all figure cases, calculations confirming greater yield for in time production through hypothetical mesh size increase to 60 mm, are definitely well founded.
1 - Rappel des buts de l'étude La gestion des pêcheries de merlu et de langoustine peut être considérée comme le problème le plus important du Golfe de Gascogne. Les méthodes de calcul employées pour évaluer les variations de la production sous diverses contraintes d'effort et de maillage mettent toutes l'accent sur le rôle capital des pêcheries à petits maillages sur l'état du stock nord de merlu. Le niveau de responsabilité des pêcheries de langoustine du Golfe de Gascogne dans la surexploitation du merlu semble démesuré eu égard aux dimensions respectives des deux stocks. Le stock de merlu s'étend du Nord des Iles Britanniques au Nord de l'Espagne alors que le stock de langoustine est localisé aux vasièrés du Golfe de Gascogne. La solution biologique du problème est connue et tient à une augmentation généralisée des maillages à 80 mm qui amènerait le rendement du stock de merlu à son maximum. Il serait illusoire de prétendre que tous les acteurs opérant sur le stock de merlu arriveront jamais à l'utiliser. Pour le moment, le problème se pose essentiellement en termes économiques car beaucoup de navires poursuivent un schéma d'exploitation hérité des années 1960 et pèchent sur des vasièrés côtières qui sont les zones les plus exploitées et où ils effectuent leurs captures au détriment des jeunes classes d'âge de merlu et de langoustine. En raison des délais impartis, cette étude constitue la préparation à une modélisation bioéconomique. On y trouvera donc une description des pêcheries et un bilan de l'exploitation sur les données disponibles en 1986. 2 - Travaux effectués 2 . 1 Description de la pêcherie Il s'agissait avant tout de poser les problèmes et de préparer les analyses ultérieures. Les langoustiniers sont présumés, d'après les modèles d'évaluation employés, effectuer sur les immatures de merlu des prélèvements tels qu'ils mettent en danger toute l'exploitation du stock. La distribution de la langoustine est très liée à la nature du fond car elle ne peut construire son terrier que sur des fonds de vase fine. Celle du merlu est beaucoup plus large et inféodée à la recherche de nourriture, crevettes euphausiacées en particulier, on le trouve donc sur les fonds sableux à sablo-vaseux. La langoustine est recherchée par une flottille de 400 à 450 bateaux dont les caractéristiques sont très variables suivant leur appartenance géographique. Au nord, la pêcherie est proche des ports exploitants et les rendements en langoustine et en prise accessoire sont suffisants pour faire vivre une flottille ancienne. Vers le sud, la structure est très diversifiée et la flexibilité est généralement la règle et les navires de construction récente peuvent changer de cible aisément de façon saisonnière ou au cours de la même journée de pêche. Globalement, les débarquements de merlu du stock nord sont en légère hausse. Ce redressement est dû probablement aux augmentations de maillage, même légères, généralisées et à une baisse de l'effort sur les pêcheries où s'effectuent des captures d'immatures. Les débarquements de langoustine sont stables ou en légère baisse et les rendements, au moins sur la pêcherie du nord, varient avec des oscillations de ±15 à ±20 % autour d'une moyenne de 100 kg/jour. Les paramètres biologiques utilisés pour chaque espèce dans les évaluations sont ceux en usage dans les groupes de travail du CIEM et de la CEE. Parmi ces paramètres, ceux décrivant la croissance sont les plus importants. Pour le merlu une équation de croissance intermédiaire entre mâles et femelles a été utilisée. Pour la langoustine les deux sexes sont traitées séparément. Les simulations ont porté sur trois types de données : Variations de l'effort des langoustiniers Augmentation du maillage des langoustiniers La diminution de l'effort des langoustiniers ou L'augmentation de maillage agisse très exactement dans le même sens sur la production des stocks de merlu et de langoustine. Enfin une étude succincte de la sensibilité des résultats des évaluations a été effectuée pour des modifications : - de la composition en taille des rejets de merlu par les langoustiniers. L'étendue des tailles reste la même mais le nombre dans chaque classe varie selon le même pourcentage. des paramètres de croissance de la langoustine, le couple de valeurs utilisées (L» = 76 mm et k = 0.11 pour les mâles, L°° = 56 mm et k = 0.14 pour les femelles) constituant l'hypothèse "haute" Dans le premier cas, une erreur de 20 % sur l'évaluation des rejets pour un cnaillage de 60 mm n'apporterait qu'une modification de 3 % dans la production globale du stock. Ces premiers résultats sont en contradiction avec les conclusions habituelles des évaluations et il sera nécessaire de reprendre les calculs en modifiant le pas des classes de taille. Dans le deuxième cas, pour une diminution de L» et une augmentation de la vitesse de croissance, les variations de la production à terme restent à l'intérieur des fluctuations interannuelles habituelles. Dans tous les cas de figure, les calculs confirmant l'augmentation de la production à terme dans l'hypothèse d'une augmentation de maillage à 60 mm sont d'une robustesse à toute épreuve.

Droits : 1987 Ifremer
http://archimer.ifremer.fr/doc/1987/rapport-1763.pdf
http://archimer.ifremer.fr/doc/00000/1763/

Éditeur(s) : HAL CCSD Ecological Society of America
Résumé : Tropical plant diversity is extraordinarily high at both local and regional scales. Many studies have demonstrated that natural enemies maintain local diversity via negative density dependence, but we know little about how natural enemies influence beta-diversity across habitats and/or regions. One way herbivores could influence plant beta-diversity is by driving allocation trade-offs that promote habitat specialization across resource gradients. We therefore predicted that increasing resource availability should be accompanied by increasing herbivory rates and decreasing plant allocation to defense. Second, relative abundances within plant lineages are predicted to reflect patterns of habitat specialization and allocation trade-offs. A phylogenetic context is vital not only to compare homologous plant traits (including defense strategies) across habitat types, but also to connect evolutionary trade-offs to patterns of species diversification in each phylogenetic lineage. We tested these predictions for trees in white-sand, clay terra firme, and seasonally flooded forests in Peru and French Guiana that represent the range of soil fertility, forest structure, and floristic compositions found throughout the Amazon region. We established 74 0.5-ha plots in these habitats and sampled all trees. Within 12 representative plots we marked newly expanding leaves of 394 saplings representing 68 species, including the most abundant species in each plot in addition to species from five focal lineages: Swartzia and Inga (Fabaceae), Protieae (Burseracaeae), Bombacoideae (Malvaceae), and Micropholis (Sapotaceae). We measured total leaf production rates for each sapling and calculated relative herbivory impact as the ratio between herbivory rate and leaf production rate. Herbivory rates averaged 2.1% per month, did not correlate with leaf production rate, and were similar across habitats. Relative herbivore impacts exceeded leaf production rates for most species. Leaf production rate averaged 2.8%, was significantly higher in seasonally flooded forests than the other two habitats, and exhibited significant correlations with specific leaf area. Species with high herbivory rates exhibited significantly lower relative abundances in terra firme forests. Overall, focal species within lineages present contrasting patterns regarding their herbivory rates and leaf production rate within habitats. These results highlight why a lineage-based approach is necessary when attempting to connect hypotheses regarding evolutionary trade-offs to community assembly patterns.
ISSN: 0012-9658

hal-01032418
https://hal.archives-ouvertes.fr/hal-01032418

Éditeur(s) : Soc Geol France
Résumé : The Lesser Antilles subduction zone has produced no recent strong thrust earthquakes, making it difficult to quantify the seismic hazard from such events. The Lesser Antilles arc has a low subduction rate and an accretionary wedge that is very wide at its southern end. To investigate the effect of the wedge on seismogenesis, numerical models of forearc thermal structure were constructed along six transects perpendicular to the arc in order to determine the thermally predicted width of the seismogenic zone. The geometry of each section is constrained by published seismic profiles and crustal models derived from gravity and seismic data and by earthquake hypocenters at depth. A major constraint on the deep part of the model is that mantle temperature beneath the volcanic arc should achieve a temperature of 1,100 degrees C to generate partial melts. Predicted surface heat flow is compared to the available heat flow observations. Thermal modeling results indicate a systematic southward increase in the width of the seismogenic zone, more than doubling in width from north to south and corresponding to a dramatic southward increase in forearc width (distance from the arc to the deformation front of the accretionary wedge). The minimum width of the seismogenic zone (distance between the intersections of the subduction interface with the 150 degrees C and 350 degrees C isotherms) increases from about 80 km, north of 16 degrees N, to 230 km, at 13 degrees N. The maximum width (between the 100 degrees C and 450 degrees C isotherms) ranges from about 150 km in the north to up to 320 km in the south. This large variation in the width of the seismogenic zone is a consequence of the increasing width of the accretionary wedge to the south, caused by the increased thickness of sediment on the subducting plate. There is good agreement between the thermally predicted seismogenic limits and the sparse distribution of recorded thrust earthquakes, which are observed only in the northern portion of the arc. Possible scenarios for mega-thrust earthquakes are discussed. Depending on the segment length (along-strike) of the rupture plane, the occurrence of an event of magnitude 8-9 cannot be excluded.
L’absence de grands séismes récents à mécanismes chevauchants dans la zone de subduction des Petites Antilles rend difficile l’évaluation de l’aléa sismique lié à de tels événements. L’arc des Petites Antilles est caractérisé par une faible vitesse de subduction et par la présence d’un prisme d’accrétion très développé à son extrémité méridionale. Afin d’évaluer les effets de la largeur de ce prisme sur la genèse des séismes, nous avons étudié six sections perpendiculaires à l’arc, du nord au sud de celui-ci, pour déterminer la largeur de la zone sismogène prédite par les modèles thermiques appliqués à chacune de ces coupes. La géométrie de ces dernières est contrainte par les profils sismiques publiés, par les modèles de structure crustale déduits des données gravitaires et sismiques, et enfin par la distribution des hypocentres des séismes. Un contrôle important permettant de tester la validité des modèles thermiques en profondeur est qu’une température minimale de 1 100oC, compatible avec la fusion partielle du manteau hydraté, doit être atteinte sous l’arc volcanique actif. Par ailleurs, le flux thermique en surface prédit par ces modèles doit être compatible avec les mesures de flux de chaleur. Les modèles thermiques retenus d’après ces critères montrent une augmentation du simple au double vers le sud de la largeur de la zone sismogène, qui correspond à un élargissement considérable de la taille du domaine avant-arc. En effet, la largeur minimale de la zone sismogène (définie comme la distance entre les intersections de l’interface des plaques avec les isothermes 150o et 350oC) augmente d’environ 80 km au nord de 16oN jusqu’à 230 km à 13oN. La largeur maximale de cette zone (définie par les intersections de l’interface avec les isothermes 100o et 450oC) augmente, quant à elle, d’environ 150 km au nord jusqu’à 320 km au sud de l’arc. Cette variation considérable est la conséquence de l’augmentation de la largeur du prisme d’accrétion, elle-même causée par l’accumulation croissante des sédiments déposés sur la plaque plongeante. Les largeurs de la zone sismogène prédites à l’aide des modèles thermiques sont en bon accord avec les rares données disponibles sur les séismes à mécanismes chevauchants dans la partie nord de l’arc. Les scénarios possibles relatifs à des méga-séismes de ce type n’excluent pas de futurs événements atteignant des magnitudes de 8 à 9.
Bulletin De La Societe Geologique De France (0037-9409) (Soc Geol France), 2013 , Vol. 184 , N. 1-2 , P. 47-59

Droits : 2013 Societe Geologique de France
http://archimer.ifremer.fr/doc/00140/25140/29432.pdf
DOI:10.2113/gssgfbull.184.1-2.47
http://archimer.ifremer.fr/doc/00140/25140/

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
ABSTRACT: BACKGROUND: Climate change poses unprecedented challenges, ranging from global and local policy challenges to personal and social action. Heat-related deaths are largely preventable, but interventions for the most vulnerable populations need improvement. Therefore, the prior identification of high risk areas at the community level is required to better inform planning and prevention. We aimed to demonstrate a simple and flexible conceptual framework relying upon satellite thermal data and other digital data with the goal of easily reproducing this framework in a variety of urban configurations. RESULTS: The study area encompasses Rennes, a medium-sized French city. A Landsat ETM + image (60 m resolution) acquired during a localized heatwave (June 2001) was used to estimate land surface temperature (LST) and derive a hazard index. A land-use regression model was performed to predict the LST. Vulnerability was assessed through census data describing four dimensions (socio-economic status, extreme age, population density and building obsolescence). Then, hazard and vulnerability indices were combined to deliver a heatwave health risk index. The LST patterns were quite heterogeneous, reflecting the land cover mosaic inside the city boundary, with hotspots of elevated temperature mainly observed in the city center. A spatial error regression model was highly predictive of the spatial variation in the LST (R2 = 0.87) and was parsimonious. Three land cover descriptors (NDVI, vegetation and water fractions) were negatively linked with the LST. A sensitivity analysis (based on an image acquired on July 2000) yielded similar results. Southern areas exhibited the most vulnerability, although some pockets of higher vulnerability were observed northeast and west of the city. The heatwave health risk map showed evidence of infra-city spatial clustering, with the highest risks observed in a north--south central band. Another sensitivity analysis gave a very high correlation between 2000 and 2001 risk indices (r = 0.98, p < 10-12). CONCLUSIONS: Building on previous work, we developed a reproducible method that can provide guidance for local planners in developing more efficient climate impact adaptations. We recommend, however, using the health risk index together with hazard and vulnerability indices to implement tailored programs because exposure to heat and vulnerability do not require the same prevention strategies.
ISSN: 1476-072X

inserm-00762303
http://www.hal.inserm.fr/inserm-00762303
http://www.hal.inserm.fr/inserm-00762303/document
http://www.hal.inserm.fr/inserm-00762303/file/1476-072X-11-38.pdf
DOI : 10.1186/1476-072X-11-38

Éditeur(s) : HAL CCSD Nordic Ecological Society
Résumé : Niche differentiation and ecological filtering are primary ecological processes that shape community assembly, but their relative importance remains poorly understood. Analyses of the distributions of functional traits can provide insight into the community structure generated by these processes. We predicted the trait distributions expected under the ecological processes of niche differentiation and environmental filtering, then tested these predictions with a dataset of 4672 trees located in nine 1-ha plots of tropical rain forest in French Guiana. Five traits related to leaf function (foliar N concentration, chlorophyll content, toughness, tissue density and specific leaf area), and three traits related to stem function (trunk sapwood density, branch sapwood density, and trunk bark thickness), as well as laminar surface area, were measured on every individual tree. There was far more evidence for environmental filtering than for niche differentiation in these forests. Furthermore, we contrasted results from species-mean and individual-level trait values. Analyses that took within-species trait variation into account were far more sensitive indicators of niche differentiation and ecological filtering. Species-mean analyses, by contrast, may underestimate the effects of ecological processes on community assembly. Environmental filtering appeared somewhat more intense on leaf traits than on stem traits, whereas niche differentiation affected neither strongly. By accounting for within-species trait variation, we were able to more properly consider the ecological interactions among individual trees and between individual trees and their environment. In so doing, our results suggest that the ecological processes of niche differentiation and environmental filtering may be more pervasive than previously believed.
ISSN: 0030-1299

hal-01032397
https://hal.archives-ouvertes.fr/hal-01032397
DOI : 10.1111/j.1600-0706.2010.19110.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimentally Assisted Molecular Modelling (EAMM) is an original approach for predicting the structure of organic micro-crystals and deducing their habit in the presence of various solvents and additives. It is applied here in the case of n-octylamino-nitrobenzoxadiazole (nOA-NBD), a fluorescent compound. This general approach is first of all described and validated by its blind application to three known and closely-related crystals. Then, the whole process is applied to predict the molecular crystal generated by n-octylamino-NBD, including the molecule conformation, its structure (cell parameters, molecular packing, X-ray powder diagrams) and its theoretical plus actual habits in the presence of a solvent (p-xylene) and two additives (acetic acid and n-dodecane). The conformation of the predicted molecule is validated by comparison with two similar molecules embedded in observable crystals. Then, the choice between two proposed structures (with the same energy and two equiprobable packings) is based on the comparison between experimental and re-computed X-ray powder diffraction diagrams, and also on the interpretation of an actual TEM image in the light of the proposed cell parameters. This choice is confirmed by the comparison between the vapour-grown face development (proposed by the BFDH or the attachment energy models) and the actual face development in a pure solvent. Finally, the actual habit deduced from comparing the crystal attachment energy with the adsorption energy of solvent or additive molecules is validated by SEM images of NBD micro-crystals in presence of the solvent alone or in presence of both additives. In conclusion, the EAMM approach appears to be a decisive tool for quickly simulating structural and habit properties of the molecular crystals, accessible or not by experimentation. Thus, a numerical selection of molecules becomes possible in view of deriving organic materials with predetermined properties, such as the fluorescence properties of the compound considered in the present study.
ISSN: 0022-0248

hal-00857894
https://hal.archives-ouvertes.fr/hal-00857894
DOI : 10.1016/j.jcrysgro.2011.07.035

Éditeur(s) : HAL CCSD Elsevier
Résumé : Rh (Rhesus) is a major blood group system in man, which is clinically significant in transfusion medicine. Rh antigens are carried by an oligomer of two major erythroid specific polypeptides, the Rh (D and CcEe) proteins and the RhAG glycoprotein, that shared a common predicted structure with 12 transmembrane a-helices (M0 to M11). Non erythroid homologues of these proteins have been identified (RhBG and RhCG), notably in diverse organs specialized in ammonia production and excretion, such as kidney, liver and intestine. Phylogenetic studies and experimental evidence have shown that these proteins belong to the Amt/Mep/Rh protein superfamily of ammonium/methylammonium permease, but another view suggests that Rh proteins might function as CO2 gas channels. Until recently no information on the structure of these proteins were available. However, in the last two years, new insight has been gained into the structural features of Rh proteins (through the determination of the crystal structures of bacterial AmtB and archeaebacterial Amt-1. Here, models of the subunit and oligomeric architecture of human Rh proteins are proposed, based on a refined alignment with and crystal structure of the bacterial ammonia transporter AmtB, a member of the Amt/ Mep/Rh superfamily. This alignment was performed considering invariant structural features, which were revealed through Hydrophobic Cluster Analysis, and led to propose alternative predictions for the less conserved regions, particularly in the N-terminal sequences. The Rh models, on which an additional Rh-specific, N-terminal helix M0 was tentatively positioned, were further assessed through the consideration of biochemical and immunochemical data, as well as of stereochemical and topological constraints. These models highlighted some Rh specific features that have not yet been reported. Among these, are the prediction of some critical residues, which may play a role in the channel function, but also in the stability of the subunit structure and oligomeric assembly. These results provide a basis to further understand the structure/function relationships of Rh proteins, and the alterations occurring in variant phenotypes.
ISSN: 1246-7820

hal-00068842
https://hal.archives-ouvertes.fr/hal-00068842

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Challenging evaluation of tropical forest biodiversity requires the reporting of taxonomic diversity but also the systematic characterization of wood properties in order to discover new promising species for timber industry. Among wood properties, the dimensional stability is regarded as a major technological characteristic to validate whether a wood species is adapted to commercial uses. Cell structure and organization are known to influence the drying shrinkage making wood density and microfibrils angle markers of choice to predict wood dimensional stability. On the contrary the role of wood extractive content remains unclear. This work focuses on the fast-growing tropical species Bagassa guianensis and we report herein a correlation between heartwood drying shrinkage and extractive content. Chemical extractions and shrinkage experiments were performed on separate wood twin samples to better evaluate correctly how secondary metabolites influence the wood shrinkage behaviour. Extractive content were qualitatively and quantitatively analysed using HPLC and NMR spectroscopy. We found that B guianensis heartwood has a homogeneous low shrinkage along its radius that could not be explained only by its basic density. In fact the low drying shrinkage is correlated to the high extractive content and a corrected model to improve the prediction of wood dimensional stability is presented. Additionally NMR experiments conducted on sapwood and heartwood extracts demonstrate that secondary metabolites biosynthesis occurs in sapwood thus revealing B. guianensis as a Juglans-Type heartwood formation. This work demonstrates that B. guianensis, a fast-growing species associated with high durability and high dimensional stability, is a good candidate for lumber production and commercial purposes.
ISSN: 1932-6203

hal-01392725
https://hal.archives-ouvertes.fr/hal-01392725
https://hal.archives-ouvertes.fr/hal-01392725/document
https://hal.archives-ouvertes.fr/hal-01392725/file/2016_BossuBeaucheneEstevezDuplaisClair_PlosOne_WoodDimentionalStabilityAndSecondaryMetabolites.pdf
DOI : 10.1371/journal.pone.0150777.s005

Éditeur(s) : HAL CCSD
Résumé : International audience
In vitro evaluation of P-glycoprotein (P-gp) inhibitory potential is now a regulatory issue during drug development, in order to predict clinical inhibition of P-gp and subsequent drug-drug interactions. Assays for this purpose, commonly based on P-gp-expressing cell lines and digoxin as a reference P-gp substrate probe, unfortunately exhibit high variability, raising thus the question of developing alternative or complementary tests for measuring inhibition of P-gp activity. In this context, the present study was designed to investigate the use of the fluorescent dye rhodamine 123 as a reference P-gp substrate probe for characterizing P-gp inhibitory potential of 16 structurally-unrelated drugs known to interact with P-gp. 14/16 of these P-gp inhibitors were found to increase rhodamine 123 accumulation in P-gp-overexpressing MCF7R cells, thus allowing the determination of their P-gp inhibitory potential, i.e., their half maximal inhibitor concentration (IC50) value towards P-gp-mediated transport of the dye. These IC50 values were in the range of variability of previously reported IC50 for P-gp and can be used for the prediction of clinical P-gp inhibition according to Food and Drug Administration (FDA) criteria, with notable sensitivity (80%). Therefore, the data demonstrated the feasibility of the use of rhodamine 123 for evaluating the P-gp inhibitory potential of drugs
Pharmaceutics

hal-01305488
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01305488
DOI : 10.3390/pharmaceutics8020012
PUBMED : 27077878

Éditeur(s) : HAL CCSD
Résumé : Geological storage of CO2 is one of diverse technologies being explored to reduce atmospheric carbon fromindustrial processes (i.e. fossil fuel combustion). One of the specific features of CO2 injection is the possibility ofgeochemical reactions (dissolution – precipitation) between mobile reactive brine (e.g. formation water enrichedin CO2) and the host rock during the spatial and temporal evolution of CO2. That leads to modifications in thepore structure, which in turn change the flow dynamics of the reservoir (e.g. the permeability k). Then, thesesstructural modifications can largely control the injectivity, so that the pressure field in the reservoir and also theCO2 propagation. Accordingly, it is crucial to explore the changes in the reservoir properties (e.g. structural andhydrodynamic) induced during a CO2 injection and specially the relationships between them (e.g. k or reactivesurface-Sr versus porosity-φ , k versus rock heterogeneity), for developing predictive modelling tools of thetransport and reaction processes occurring during a CO2 injection and reliable risk assessment. In the case ofcarbonate rocks, the application of the predictive models of transport and reaction is still challenging, because oftheir high heterogeneity so that the incertitude in the reaction kinetics of carbonate minerals.From this perspective, we realized brine-enriched in CO2 percolation experiments through carbonate rocksamples in thermodynamic conditions expected during CO2 injection in deep reservoirs (T = 100°C et P =12MPa). The permeability changes k(t) is monitored during the experiments and the porosity variationφ (t) iscalculated from chemical analyses of the sampled outlet fluids, using ICP-EAS. The pore structure modificationsare investigated from high resolution X ray micro tomography images acquired from the synchrotron ofGrenoble (ESRF). Depending to the dissolution regime, controlled by the reservoir rock fabric and the chemicalcomposition of the brine (e.g. PCO2), we observed that a modification of pore structure can either improve(atypical result in dissolution context) or impair the value of the permeability k.
Le stockage géologique du CO2 est l’une des diverses technologies étant explorées afin deréduire les émissions de carbone atmosphérique des processus industriels (i.e. combustion del’énergie fossile). L’une des spécifiques caractéristiques de l’injection du CO2 en profondeurreste la possibilité de réactions géochimiques (dissolution-précipitation) entre la saumureréactive mobile (e.g. eau de formation enrichie en CO2) et la roche encaissante durantl’évolution spatiale et temporelle du CO2, conduisant à des modifications dans la structure despores et par conséquent dans les propriétés d’écoulement du réservoir (e.g. la perméabilité k).Donc, ces changements structuraux peuvent largement contrôler l’injectivité, ainsi que lechamp de pression dans le réservoir et aussi la propagation du CO2. Il demeure ainsi cruciald’explorer les changement dans les propriétés de réservoirs (e.g. structurales ethydrodynamiques) induits durant une injection de CO2 et explicitement les relations existantesentre eux (e.g. k ou surface réactive-Sr versus porosité-φ , k versus hétérogénéité de la roche),afin de développer des outils de modélisation prédictive des processus de transport etréactionnels se produisant durant une injection de CO2 et d’évaluer de façon fiable les risques.Dans le cas des réservoirs carbonatés, l’application des modèles prédictifs de transport réactifdemeure toujours un enjeu, car contrainte par la forte hétérogénéité en leur sein ainsi que parl’incertitude dans la cinétique de réactions des minéraux carbonatés dans ce contexte. Danscette optique, nous avons réalisé des expériences de percolation à travers des échantillons deroches carbonatées dans les conditions thermodynamiques de stockage en profondeur (T =100°C et P =12 MPa). L’évolution de la perméabilité k(t) est suivie au cours desexpériences ; et la variation de la porosité φ (t) est calculée à partir des résultats d’analyseschimiques au ICP-AES des fluides de sortie échantillonnés. L’investigation des modificationsapportées à la structure des pores est réalisée par le biais de la Micro-Tomographie hauterésolution à rayon X, acquise au synchrotron de Grenoble (e.g. ESRF).Dépendant du régime de dissolution, contrôlé par la fabrique de la roche réservoir et lacomposition chimique de la saumuré chargée en CO2 (e.g. PCO2 engagée), on a observéqu’une modification de la structure de la roche peut soit améliorer soit détériorer (résultatatypique en contexte de dissolution) la valeur de la perméabilité k.
https://hal.archives-ouvertes.fr/tel-01142136

tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136/document
https://hal.archives-ouvertes.fr/tel-01142136/file/thesemangane2013.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
BACKGROUND AND AIM: The impact of basal core promoter (BCP) and precore (PC) mutants of the hepatitis B virus (HBV) on liver disease severity remains controversial. The aim of the present study was to screen BCP and PC mutations in 252 HBV surface antigen (HBsAg) positive carriers in France and to assess relationships between these mutations and severe fibrosis. METHODS: Direct sequencing of the precore/core gene was used to detect A1762T/G1764A and G1757A mutations in the BCP and G1896A and G1899A mutations in the PC region. RESULTS: The prevalences of A1762T/G1764A, G1757A, G1896A, and G1899A mutations were 34.1%, 38.7%, 54.9%, and 29.3% (P < 0.001), respectively. The independent predictors of severe fibrosis (>/=F3 Metavir) were older age (P < 0.001), male gender (P = 0.012), elevated alanine aminotransferase (P < 0.001), and the double A1762T/G1764A mutant with no other mutations (P = 0.011). Interestingly, the association of the G1899A mutation with the double A1762T/G1764A mutant significantly counteracted the deleterious effect of the sole double A1762T/G1764A mutant (odds ratio [OR] = 0.28 vs. OR = 3.55, respectively, P = 0.028). CONCLUSIONS: Patients with the A1762T/G1764A mutation have a higher risk of severe fibrosis. The G1899A mutation is a protective factor against severe fibrosis that counteracted the deleterious effect of the A1762T/G1764A mutation. Finally, host phenotypic and HBV genotypic markers independently predict fibrosis severity.
Journal of gastroenterology and hepatology

hal-01477209
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01477209
DOI : 10.1111/jgh.13338
PUBMED : 26992056

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
Background: Ameloblastin (AMBN) is a phosphorylated, proline/glutamine-rich protein secreted during enamel formation. Previous studies have revealed that this enamel matrix protein was present early in vertebrate evolution and certainly plays important roles during enamel formation although its precise functions remain unclear. We performed evolutionary analyses of AMBN in order to (i) identify residues and motifs important for the protein function, (ii) predict mutations responsible for genetic diseases, and (iii) understand its molecular evolution in mammals. Results: In silico searches retrieved 56 complete sequences in public databases that were aligned and analyzed computationally. We showed that AMBN is globally evolving under moderate purifying selection in mammals and contains a strong phylogenetic signal. In addition, our analyses revealed codons evolving under significant positive selection. Evidence for positive selection acting on AMBN was observed in catarrhine primates and the aye-aye. We also found that (i) an additional translation initiation site was recruited in the ancestral placental AMBN, (ii) a short exon was duplicated several times in various species including catarrhine primates, and (iii) several polyadenylation sites are present. Conclusions: AMBN possesses many positions, which have been subjected to strong selective pressure for 200 million years. These positions correspond to several cleavage sites and hydroxylated, O-glycosylated, and phosphorylated residues. We predict that these conserved positions would be potentially responsible for enamel disorder if substituted. Some motifs that were previously identified as potentially important functionally were confirmed, and we found two, highly conserved, new motifs, the function of which should be tested in the near future. This study illustrates the power of evolutionary analyses for characterizing the functional constraints acting on proteins with yet uncharacterized structure.
ISSN: 1471-2148

Droits : http://creativecommons.org/licenses/by/
hal-01212816
http://hal.upmc.fr/hal-01212816
http://hal.upmc.fr/hal-01212816/document
http://hal.upmc.fr/hal-01212816/file/s12862-015-0431-0.pdf
DOI : 10.1186/s12862-015-0431-0