Éditeur(s) : HAL CCSD
Résumé : International audience
Over the past decade, much attention has been devoted to the development of forest biomass estimation methods at a stand scale, leading to the establishment of allometric models (Chave et al., 2014). These allometric equations use a unique wood specific gravity value (WSG) per species, but neglect the within tree variations of WSG found by others (Wiemann & Williamson, 1989).The main objectives of this study are (1) to illustrate the diversity of radial (from pith to bark) and longitudinal (from bottom to top) patterns of WSG variation within and between species, (2) to highlight different trends of WSG radial variations and the possible misinterpretations of these trends due to the effect of heartwood and (3) to link these variations and patterns to the successional status of the species (from pioneer to sciaphilic species).We sampled 33 small trees (10 Wood sciences underpinning tropical ecology and management. International closing symposium of the XYLAREDD project.
Tervuren, Belgium

hal-01188894
https://hal-sde.archives-ouvertes.fr/hal-01188894

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
A feasibility study of glulam was carried out in French Guiana using local wood species. The aim was to determine gluing parameters affording satisfactory behaviour to manufactured glulam in a tropical climate. Three abundant wood species, with special properties, were selected for the study and Resorcinol-Phenol-Formaldehyde resin was used for bonding. Three industrial parameters were considered: adhesive spread rate, closed assembly time and gluing pressure. Delamination and shearing tests were carried outin accordance with European Standards. The tests revealed the influence of wood properties and manufacturing parameters on joint resistance. In fact, the results showed that specific gravity and the shrinkage coefficientgreatly influenced the gluing step. Indeed, wood with a medium specific gravity needed more adhesive and more pressure than wood with a high specific gravity. In addition, planning and lamella thicknesswere found to affect glue joint resistance.
ISSN: 0018-3768

hal-00856933
https://hal.archives-ouvertes.fr/hal-00856933
https://hal.archives-ouvertes.fr/hal-00856933/document
https://hal.archives-ouvertes.fr/hal-00856933/file/Feasibility_glued_laminated_timber_Bourreau_al.pdf

Éditeur(s) : HAL CCSD Springer-Verlag Berlin Heidelberg
Résumé : International audience
The main biological function of reaction wood is to act as " muscle " for trees, enabling them to control their posture. The key property to achieve this function is the development of high mechanical stress during the formation of reaction wood cells, called " maturation strains ". Actually, reaction wood formation is basically the asymmetric formation of wood around the tree circumference, with higher maturation strains on the side where reaction wood is formed than on the opposite side. This asymmetry enables stems to bend upward or to compensate for the downward bending induced by gravity. At the cross section level, the performance in this biological function is linked not only to the magnitude of this asymmetry but also to an effect of the cross-sectional size (diameter) of the stem. Eccentric growth and variations in wood mechanical stiffness are second order effects that can modify this performance. Differences in maturation strains between reaction and non-reaction woods are related to their specific cell wall structure and composition. The swelling of the cell wall matrix during maturation and the effect of microfibril angle explain the differences in maturation strains between normal and compression wood. However, this mechanism fails in explaining the high maturation shrinkage of tension wood, and several hypotheses at the molecular levels are still under debate. How trees perceive their gravitational disequilibrium is also an open question for physiologists. Integrative biomechanical modelling (from the polymer level to the cell wall, cross section and whole tree levels) enables defining key variables that explain the performance of reaction wood as a system that insures the stem motricity. Maturation strains can be precisely measured only in recently formed wood at the tree surface, but their changes during the whole tree life can also be estimated by retrospective dendrochronological analysis through structural markers of reaction wood. Lastly, wood in living trees ensures general storage, defence, vascular and skeletal functions, that ask general questions about synergies and trade-offs as the structural characteristics of reaction wood can affect all these functions.
The Biology of Reaction Wood

ISBN : 978-3-642-10813-6
hal-01452085
https://hal.archives-ouvertes.fr/hal-01452085
https://hal.archives-ouvertes.fr/hal-01452085/document
https://hal.archives-ouvertes.fr/hal-01452085/file/Chap_Gril_al_Biomechanical_action_biological_functions_2014.pdf

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
This study aims at better understanding the respective influences of specific gravity (γ), microfibril angle (MFA), and cell-wall matrix polymers on viscoelastic vibrational properties of wood in axial direction. The wide variations of properties between normal wood (NW) and compression wood (CW) are in focus. Three young bent trees (Picea abies, Pinus sylvestris and Pinus pinaster) that recovered verticality were sampled. Several observed differences between NW and CW were highly significant in terms of anatomical, physical (γ, shrinkage, CIELab colorimetry), mechanical (compressive strength), and vibrational properties. Specific dynamic modulus of elasticity (E'/γ) decreases with increasing MFA, and Young's modulus (E') can be satisfactorily explained by γ and MFA. Apparently, the type of the cell wall polymer matrix is not influential in this regard. The damping coefficient (tanδ) does not depend solely on MFA of NW and CW. The tanδ - E'/γ relationship evidences that, at equivalent E'/γ, the tanδ of CW is approx. 34% lower than that of NW. This observation is ascribed to the more condensed nature of CW lignins, and this is discussed in the context of previous findings in other hygrothermal and time/frequency domains. It is proposed that the lignin structure and the amount and type of extractives, which are both different in various species, are partly responsible for taxonomy-related damping characteristics.
ISSN: 0018-3830

hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062/document
https://hal.archives-ouvertes.fr/hal-00808062/file/Changes_viscoelastic_vibrational_Bremaud_al.pdf
DOI : 10.1515/hf-2011-0186

Éditeur(s) : HAL CCSD Wiley
Résumé : Wood specific gravity (WSG) is a strong predictor of tree performance across environmental gradients. Yet it remains unclear how anatomical elements linked to different wood functions contribute to variation in WSG in branches and roots across tropical forests. [br/][br/]We examined WSG and wood anatomy in white sand, clay terra firme and seasonally flooded forests in French Guiana, spanning broad environmental gradients found throughout Amazonia. We measured 15 traits relating to branches and small woody roots in 113 species representing the 15 most abundant species in each habitat and representative species from seven monophyletic lineages occurring in all habitats. [br/][br/]Fiber traits appear to be major determinants of WSG, independent of vessel traits, in branches and roots. Fiber traits and branch and root WSG increased from seasonally flooded species to clay terra firme species and lastly to white sand species. Branch and root wood traits were strongly phylogenetically constrained. Lineages differed in wood design, but exhibited similar variation in wood structure across habitats. [br/][br/]We conclude that tropical trees can invest differently in support and transport to respond to environmental conditions. Wind disturbance and drought stress represent significant filters driving tree distribution of Amazonian forests; hence we suggest that biophysical explanations should receive more attention.
ISSN: 0028-646X

hal-01195075
https://hal.archives-ouvertes.fr/hal-01195075
PRODINRA : 269680
PUBMED : 24329812

Éditeur(s) : HAL CCSD Botanical Society of America
Résumé : Premise of the study : Wood density correlates with mechanical and physiological strategies of trees and is important for estimating global carbon stocks. Nonetheless, the relationship between branch and trunk xylem density has been poorly explored in neotropical trees. Here, we examine this relationship in trees from French Guiana and its variation among different families and sites, to improve the understanding of wood density in neotropical forests. Methods : Trunk and branch xylem densities were measured for 1909 trees in seven sites across French Guiana. A major-axis fit was performed to explore their general allometric relationship and its variation among different families and sites. Key results : Trunk xylem and branch xylem densities were significantly positively correlated, and their relationship explained 47% of the total variance. Trunk xylem was on average 9% denser than branch xylem. Family-level differences and interactions between family and site accounted for more than 40% of the total variance, whereas differences among sites explained little variation. Conclusions : Variation in xylem density within individual trees can be substantial, and the relationship between branch xylem and trunk xylem densities varies considerably among families and sites. As such, whole-tree biomass estimates based on non-destructive branch sampling should correct for both taxonomic and environmental factors. Furthermore, detailed estimates of the vertical distribution of wood density within individual trees are needed to determine the extent to which relying solely upon measures of trunk wood density may cause carbon stocks in tropical forests to be overestimated.
ISSN: 0002-9122

hal-01032401
https://hal.archives-ouvertes.fr/hal-01032401
DOI : 10.3732/ajb.1000034

Résumé : Une étude de faisabilité de poutres en bois lamellé-collé a été menée en Guyane Française en utilisant les essences locales. Le but est de déterminer les paramètres de collage assurant la bonne résistance mécanique des assemblages par lamellation et par aboutage, nécessaires à la fabrication de poutres en bois lamellé-collé en climat tropical. Trois essences de bois abondantes de différentes densités ont été sélectionnées. Les adhésifs de types Mélamine-Urée-Formol et Résorcinol-Phénol-Formol ont été utilisées. Les paramètres de collage considérés sont : le grammage, le temps d’assemblage fermé et la pression.En utilisant les normes Européennes, plusieurs campagnes de tests ont été conduites sur des échantillons normalisés. Concernant le collage par lamellation, des tests élémentaires de délamination et de cisaillement des joints de colle ont été réalisés. Le test de délamination consiste en deux cycles d’immersion dans l’eau sous pression et de séchage, il induit de sévères variations d’humidité du bois susceptibles de créer des ouvertures des joints de colles. Le collage par aboutage est réalisé sur des poutres normalisées aboutées. Les entures sont obtenues grâce à un outillage standard communément utilisé pour les résineux. Les résultats ont mis en évidence l’influence des propriétés du bois et des paramètres de collage sur la résistance du joint et la résistance mécanique du produit. En effet, les paramètres du bois, tels que la densité, la rétractibilité et l’imprégnation, ont une forte influence sur le collage, en particulier sur la pression et le grammage nécessaires à la production d’un produit commercialisable. Il apparait qu’un bois de densité moyenne et poreux nécessite un grammage et une pression élevés comparé à un bois de densité élevée qui nécessite des valeurs moindres. Aussi, l’influence d’autres paramètres de fabrication, tels que le rabotage, l’encollage double face et simple face ainsi que l’épaisseur des lamelles, a été établie. Par contre il semblerait que le matériel communément utilisé pour l’aboutage des résineux n’est pas adapté aux feuillus tropicaux. En final, des paramètres de collage ont été validés pour la fabrication de lamellé-collé endémique en Guyane Française et une étude du coût de production d’une poutre lamellé-collé standard a identifié les conditions économiques d’une fabrication en Guyane Française.
A feasibility study of glued-laminated timber beams was carried out in French Guiana using local wood species. The aim of the study was to evaluate the gluing parameters that could ensure good mechanical properties for the manufactured glued-laminated beams in tropical climates. Three abundant wood species with different specific gravity were selected for the study. Melamine-Urea-Formaldehyde and Resorcinol-Phenol-Formaldehyde resins were used for gluing. The three gluing parameters considered are: adhesive spread rate, closing assembly time and gluing pressure.Using European standards, several laboratory tests were performed on normalized samples. The evaluation of a successful lamella’s gluing was done by using elementary tests of delamination and shearing. A delamination test consists of two cycles of water immersion at high pressure and drying which induces severe hygroscopic variation in wood thus causing joints opening. The finger-joints are made using a standard tool usually used for cutting softwoods. The performed tests revealed the influence of wood properties and the gluing parameters on the joint resistance and the mechanical properties of the product. Results show that wood properties such as specific gravity, shrinkage coefficient, and permeation, have a high degree of influence on the gluing step especially on the gluing pressure and on the adhesive spread rate needed to produce a commercial product. Furthermore, wood with medium specific gravity needs more adhesive and more pressure than the one with high specific gravity. Additionally, the effects of other manufacturing parameters, such as planning, double or simple side glue spreading and lamellae thicknesses, on the glue joint resistance were demonstrated. Finally, the common tools used for softwoods are not adapted to making the finger joints with tropical hardwoods.In conclusion, optimal gluing parameters for manufacturing glued-laminated timber beams in French Guiana were established and an economical study using standard glued-laminated timber beams revealed the economic conditions under which a successful manufacturing of these local beams can be implemented in French Guiana.

http://www.theses.fr/2011AGUY0484/document

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
*Context Increased knowledge on diversity in wood properties would have implications both for fundamental research and for promoting a diversification of uses as material. *Aims The objective is to contribute to overcoming the critical lack of data on the diversity of wood dynamic mechanical/viscoelastic vibrational properties, by testing lesser-known species and categorizing sources of variability. *Methods Air-dry axial specific dynamic modulus of elasticity (E'/γ) and damping coefficient (tanδ) were measured on a wide sampling (1792 specimens) of 98 wood types from 79 species. An experimental device and protocol was designed for conducting systematic (i.e. rapid and reproducible) characterizations. *Results Diversity at the specimens' level corroborates the "standard" relationship between tanδ and E'/γ, which is discussed in terms of orientation of wood elements and of chemical composition. Diversity at the species level is expressed on the basis of results for normal heartwood, with specific gravity (γ) ranging from 0.2 to 1.3. Axial E'/γ ranges from 9 to 32 GPa and tanδ from 4×10-3 to 19×10-3. Properties distribution follows a continuum, but with group characteristics. The lowest values of tanδ are only found in certain tropical hardwoods. Results can also suggest alternative species for musical instruments making.
Annals of Forest Science

hal-00808242
https://hal.archives-ouvertes.fr/hal-00808242
https://hal.archives-ouvertes.fr/hal-00808242/document
DOI : 10.1007/s13595-011-0166-z

Éditeur(s) : HAL CCSD Wiley
Résumé : Tropical forests contain an important proportion of the carbon stored in terrestrial vegetation, but estimated aboveground biomass (AGB) in tropical forests varies two-fold, with little consensus on the relative importance of climate, soil and forest structure in explaining spatial patterns. Here, we present analyses from a plot network designed to examine differences among contrasting forest habitats (terra firme, seasonally flooded, and white-sand forests) that span the gradient of climate and soil conditions of the Amazon basin. We installed 0.5-ha plots in 74 sites representing the three lowland forest habitats in both Loreto, Peru and French Guiana, and we integrated data describing climate, soil physical and chemical characteristics and stand variables, including local measures of wood specific gravity (WSG). We use a hierarchical model to separate the contributions of stand variables from climate and soil variables in explaining spatial variation in AGB. AGB differed among both habitats and regions, varying from 78 Mg ha−1 in white-sand forest in Peru to 605 Mg ha−1 in terra firme clay forest of French Guiana. Stand variables including tree size and basal area, and to a lesser extent WSG, were strong predictors of spatial variation in AGB. In contrast, soil and climate variables explained little overall variation in AGB, though they did co-vary to a limited extent with stand parameters that explained AGB. Our results suggest that positive feedbacks in forest structure and turnover control AGB in Amazonian forests, with richer soils (Peruvian terra firme and all seasonally flooded habitats) supporting smaller trees with lower wood density and moderate soils (French Guianan terra firme) supporting many larger trees with high wood density. The weak direct relationships we observed between soil and climate variables and AGB suggest that the most appropriate approaches to landscape scale modeling of AGB in the Amazon would be based on remote sensing methods to map stand structure.
ISSN: 1354-1013

hal-01374829
https://hal.archives-ouvertes.fr/hal-01374829
DOI : 10.1111/j.1365-2486.2011.02432.x
PRODINRA : 183370

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Grain deviations and high extractives content are common features of many tropical woods. We aimed at clarifying their respective impact on vibrational properties, referring to African Padauk (Pterocarpus soyauxii Taub.), a species selected for its interlocked grain, high extractives content, and uses in xylophones. Specimens were cut parallel to the trunk axis (L), and local variations in grain angle (GA), microfibril angle (MFA), specific Young's modulus (E'L/ρ, where r stands for specific gravity) and damping coefficient (tanδL), were measured. GA dependence was analyzed by a mechanical model which allowed to identify the specific Young's modulus (E'3/ρ) and shear modulus (G'/ρ) along the grain (3), as well as their corresponding damping coefficients (tanδ3, tanδG). This analysis was done for native and then for extracted wood. Interlocked grain resulted in 0-25° GA and in variations of a factor 2 in E'L/ρ and tanδL. Along the grain, Padauk wood was characterized, as compared to typical hardwoods, by a somewhat lower E'3/ρ and elastic anisotropy (E'/G'), due to a wide microfibril angle plus a small weight effect of extracts; and a very low tanδ3 and moderate damping anisotropy (tanδG/tanδ3). Extraction affected mechanical parameters in the order: tanδ3 ≈ tanδG > G'/ρ >> E'3/ρ. That is, extractives' effects were nearly isotropic on damping but clearly anisotropic on storage moduli.
ISSN: 0043-7719

hal-00544382
https://hal.archives-ouvertes.fr/hal-00544382
https://hal.archives-ouvertes.fr/hal-00544382/document
https://hal.archives-ouvertes.fr/hal-00544382/file/Identification_anisotropic_vibrational_properties_Bremaud_al.pdf
DOI : 10.1007/s00226-010-0348-0

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
ISSN: 1354-1013

hal-01107919
https://hal-agroparistech.archives-ouvertes.fr/hal-01107919
DOI : 10.1111/j.1365-2486.2011.02432.x

Éditeur(s) : HAL CCSD
Résumé : International audience
BackgroundTree above ground biomass (AGB) is currently estimated by tree-level allometrical models that take into account, tree volume estimated from proxy variables of tree size (DBH) and species average wood specific gravity (WSG). These methods are common and realistic from a practical point of view. However, they do not take into account deviance from fixed allometrical trajectories and species or tree level WSG variations. Here, we present Xtrawood software that allows computation of tree AGB according to structure and WSG variations.MethodXtrawood reconstructs tree structure and integrates WSG variations by merging tree structure and WSG data measured at different position in trees, leading to the computation of global AGB and visualization of WSG variation along tree structure. Tree structure is measured according to stem dimensions (length, diameter) and positions within tree, and encoded in Multiscale Tree Graph format (MTG). WSG data is made of radial WSG profiles (1 measure each 0,5 cm from pith to bark) sampled at different heights within whole tree. Xtrawood output are illustrated using a dataset collected on an Amazonian forest ‘biomass dominant species’, Dicorynia guianensis Amsh., also known to exhibit substantial WSG gradients along both radial and vertical axis. 9 trees ranging from 15 to 60 cm DBH were measured by climbers. Each tree was felled and samples were collected at different positions (3 in trunk, 1 to 5 in crown) to record WSG radial profiles.ResultsXtrawood allows computation of tree volume, but also visualization of WSG variations in tree as well as inference of WSG radial profiles at different heights. Output variables are decomposed according to different tree scale and locations (axis, trunk/crown) and easy to extract. Xtrawood results will be compared to those of standard estimation method and can be used to identify positions in trees where WSG value leads to the better estimate of tree AGB.Conclusion/perspectiveXtrawood produces AGB estimate with data from intensive measurements practices. The sampling protocol, used here, remains destructive and time-consuming because Xtrawood is not directly dedicated to forest managers, but to help calibration of realistic sampling strategies. Moreover, Xtrawood offers a way to understand relationships between tree development, WSG variations within tree structure and biomass accumulation in the context of natural forests or plantations. A software demo is available at coffee break.
53rd Annual Meeting of the Association for Tropical Biology and Conservation (ATBC 2016)
Montpellier, France

Droits : http://creativecommons.org/licenses/by/
hal-01349613
https://hal.archives-ouvertes.fr/hal-01349613

Résumé : L'importance des forêts tropicales dans le cycle du carbone à l'échelle planétaire est majeure, tant en terme de stock qu’en terme de flux de CO2. Plusieurs études mettent en évidence des changements au sein des forêts tropicales au cours des 20 dernières années, notamment des changements de la dynamique forestière et une augmentation de la biomasse aérienne. Les déterminants de ces variations sont aujourd’hui discutés et nous proposons ici d’apporter une contribution à ce débat. Les données utilisées dans ce travail proviennent du dispositif de suivi forestier à long terme de Paracou, Guyane Française, mis en place en 1984 et qui recouvre plus de 120 ha de forêt tropicale humide. Les données météorologiques proviennent de la tour à flux du dispositif, Guyaflux. Les mesures de diamètre proviennent de la base Guyafor pour les données annuelles et bisannuelles, et des mesures de 260 arbres à proximité de la tour à flux pour les mesures diamétriques intra-annuelles.Cette thèse se divise en deux grandes parties. La première concerne l’analyse de la biomasse du dispositif de suivi forestier de Paracou en Guyane et l’implication des changements de structure de cette forêt sur le bilan de carbone. Cette partie est constituée de deux points. (i) Quelles échelles temporelles et spatiales sont pertinentes pour analyser les composantes de structure (biomasse, aire basale et nombre de tiges) et de dynamique (croissance, recrutement et mortalité) des forêts tropicales afin de minimiser les effets d’échantillonnage ? Nous avons établi une méthodologie permettant de relier les intervalles de temps et la surface de mesure aux coefficients de variation de chacune des variables de structure et de dynamique de la forêt. (ii) Quels processus démographiques sont prépondérants dans l’explication des variations de biomasse et comment se redistribue la biomasse accumulée dans le système ? L’augmentation de la biomasse observée sur le dispositif de Paracou serait liée à la rareté des évènements de mortalité des gros arbres qui portent une part très importante de la biomasse.La deuxième partie de la thèse concerne l’analyse de l’effet du climat à moyen terme, inter et intra-annuel, et les effets directs du climat dans les changements de dynamique de la forêt. Cette partie se divise en 3 points. (i) Comment quantifier le stress hydrique en forêt tropicale humide ? Nous avons réalisé un modèle journalier de réserve en eau du sol pour les arbres en forêt tropicale. (ii) Quelles variables sont explicatives de la croissance des arbres en forêt guyanaise ? Nous avons montré que l’eau dans le sol est le facteur le plus explicatif du déterminisme climatique parmi un panel de variables climatiques. (iii) Quels traits fonctionnels sont prédicteurs de la réponse des arbres aux variations climatique ? Nous avons déterminé que des traits spécifiques, densité du bois et la hauteur maximale, ainsi que le diamètre de l'arbre au moment de la mesure, modulent la croissance des arbres en réponse au climat.
At a global scale tropical forest play a major role in term of carbon stock as well as in term of CO2 fluxes. Several studies have highlighted changes in tropical forest functioning during the last 20 years including a faster turnover and an increase of above ground biomass. The drivers of these changes are discussed and throughout this thesis we propose to contribute to this debate. We use the data from the Paracou experimental site in French Guiana established in 1984 on 120 hectares of moist tropical forest. Meteorological data come from the flux tower of the site, Guyaflux. We use annual and bisannual diameter measurements from the Guyafor database, and intra-annual diameter increments from the measurements of 260 trees near the flux tower.This thesis has two main parts. In the first part we present the biomass analysis of the Paracou permanent plots and the impact of structural changes in this forest on the carbon budget. The first part is constituted by two points. (i) Which temporal and spatial scale used to analyze the structure (biomass, basal area and stem density) and dynamics (tree growth, recruitment and mortality)components of tropical forest in order to minimized sample bias ? We establish a simple method to rely measurement interval between census and surface of measurement to the coefficient of variation of forests structure and dynamic components (ii) Which demographic process are involved in the explanation of biomass variation and how the biomass is distributed in the system ? The observed increase of biomass at Paracou could be link to the rarity of big trees mortality events. These big trees represent the larger part of the biomass. In the second part, we present the analysis of intra and inter-annual climate variation effects on forest dynamic changes. This part is divided in two points. (i) How to model drought stress in moist tropical forest ? We built a daily water balance model for tropical trees. (ii) Which climate variables explain the tree growth in guianian forests? We shown that soil water availability is the determinant factor of tree growth among a panel of climate variables. (iii) Which functional traits are involved in the tropical tree growth responses to climate? In this analysis, we determined that wood specific gravity, maximum tree height and tree diameter modulate the tree growth response to climate variations.

http://www.theses.fr/2011AGUY0481/document