Éditeur(s) : HAL CCSD
Résumé : International audience
The geology of the North Pyrenean Zone in the central Pyrenees allows for the observation in the field of theentire section of the Pyrenean rift, from the mantle to the crust and the Mesozoic cover (pre, syn and post rift).The good knowledge we have of the pre-Alpine history of the Pyrenees allows us to properly constrain the Alpinegeological evolution of the pre-Triassic rocks which record both Variscan and Alpine orogenic cycles.The mantle outcrop as kilometric to centimetric fragments of peridotite dispersed within a carbonate metamorphicbreccia. The study of peridotite serpentinisation shows several events of low-temperature serpentinisation, incontact with seawater. In some locallities, we can observe a mixture of fragments of variously serpentinizedperidotites. This suggests a tectonic context where fragments of peridotites from different structural levels weresampled more or less synchronously.The granulitic basement is characterized by a Variscan syndeformational HT event (300-280 Ma). So farwe have not found any trace of a Cretaceous HT event (> 500C). On the other hand, the basement is affectedby a regional metasomatism that began during the Jurassic and became more spatially focused with time until itwas restricted to the Pyrenean rift during the Aptien, Albian and Cenomanian. The talc-chlorite metasomatism(120-95 Ma) shows an evolution from a static toward a syn-deformation hydrothermal event, under a more or lessnormal geothermal gradient. Extensional deformation is recorded by the reworking of several inherited low-angleVariscan tectonic contacts, but also by dispersed high-angle extensional shear zones formed under greenshistconditions.The metamorphic Mesozoic cover of the basement massifs, which constitute the so-called Internal MetamorphicZone, is an allochtonous unit made of lenses of Mesozoic rocks enclosed into the breccia, whichlocally contains peridotite and basement clasts. The Mesozoic metamorphic carbonates show a first phase ofsyn-metamorphic (450-600C, P < 2 kb) ductile deformation, and subsequent phases of folding and fracturing.The datation of neoformed minerals give a 108-85 Ma time span for the metamorphism. We interpret this brecciaas an abandonment breccia which marks the emergence of the main detachment. The basal contact of the Mesozoiccover has a complex 3D geometry traced by Triassic evaporites. It corresponds to a major pre- and synorogenicpolyphased tectonic contact.All these data show a geometrically complex hyper-extended rift where the crust was not stretched under ahigh geothermal gradient but thinned by the tectonic extraction of relatively thin lenses and perhaps cut by highangle low-grade shear zones. The 3D geometry, as well as the strain records and the breccia lithologies stronglysuggest a non-cylindricity for the exhumation process, probably within a transtentional system
Geophysical Research Abstracts
Vienne, Austria

insu-01510371
https://hal-insu.archives-ouvertes.fr/insu-01510371

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
At Cima di Gagnone, garnet peridotite and chlorite harzburgite lenses within pelitic schists and gneisses correspond to eclogite-facies breakdown products of hydrated peridotites and are suitable for studying dehydration of serpentinized mantle. Thermobarometry and pseudosection modelling yield peak temperatures of 750-850°C and pressures <3 GPa. The minimum temperature recorded by the garnet peridotite corresponds to the maximum conditions experienced by the chlorite harzburgite, suggesting that these rocks recrystallized cofacially at ∼800°C. Alternatively, they might have decoupled during subduction, as achieved in tectonically active plate interface boundaries. The major and rare earth element (REE) variability of the peridotites was mostly acquired during pre-subduction mantle evolution as a result of partial melting and reactive melt flow. The ultramafic suite is also characterized by fluid-mobile element enrichments (B, Pb, As, Sb, Cs, Li, U, Be), which confirm derivation from variably serpentinized protoliths. Similarity in the U, Pb, B, Li and Sr contents of the Gagnone peridotites to present-day oceanic serpentinites suggests that these elements were partly taken up during initial serpentinization by seawater-derived fluids. Positive Be, As and Sb anomalies suggest involvement of fluids equilibrated with crustal (metasedimentary) reservoirs during subsequent subduction metamorphism and peridotite entrainment in (meta)sediments. Fluid-mobile element enrichment characterizes all peak eclogitic minerals, implying that multiple hydration events and element influx pre-dated the eclogite-facies dehydration. Peak anhydrous minerals retain B, Li, As and Sb concentrations exceeding primitive mantle values and may introduce geochemical anomalies into the Earth's mantle. The relatively low contents of large ion lithophile elements and light REE in the Gagnone peridotites with respect to much higher enrichments shown by metasomatized garnet peridotite pods hosted in migmatites (Ulten Zone, Eastern Alps) suggest that the crustal rocks at Gagnone did not experience partial melting. The Gagnone garnet peridotite, despite showing evidence for chlorite dehydration, retains significant amounts of fluid-mobile elements documenting that no partial melting occurred upon chlorite breakdown. We propose that the Gagnone ultramafic rocks represent a prime example of multi-stage peridotite hydration and subsequent dehydration in a plate interface setting.
ISSN: 0022-3530

hal-01054319
https://hal.archives-ouvertes.fr/hal-01054319
DOI : 10.1093/petrology/egt068

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The presence of two regional seismic networks in southeastern France provides us high-quality data to investigate upper mantle flow by measuring the splitting of teleseismic shear waves induced by seismic anisotropy. The 10 three-component and broadband stations installed in Corsica, Provence, and western Alps efficiently complete the geographic coverage of anisotropy measurements performed in southern France using temporary experiments deployed on geodynamic targets such as the Pyrenees and the Massif Central. Teleseismic shear waves (mainly SKS and SKKS) are used to determine the splitting parameters: the fast polarization direction and the delay time. Delay times ranging between 1.0 and 1.5 s have been observed at most sites, but some larger delay times, above 2.0 s, have been observed at some stations, such as in northern Alps or Corsica, suggesting the presence of high strain zones in the upper mantle. The azimuths of the fast split shear waves define a simple and smooth pattern, trending homogeneously WNW–ESE in the Nice area and progressively rotating to NW–SE and to NS for stations located further North in the Alps. This pattern is in continuity with the measurements performed in the southern Massif Central and could be related to a large asthenospheric flow induced by the rotation of the Corsica–Sardinia lithospheric block and the retreat of the Apenninic slab. We show that seismic anisotropy nicely maps the route of the slab from the initial rifting phase along the Gulf of Lion (30–22 Ma) to the drifting of the Corsica–Sardinia lithospheric block accompanied by the creation of new oceanic lithosphere in the Liguro–Provençal basin (22–17 Ma). In the external and internal Alps, the pattern of the azimuth of the fast split waves follows the bend of the alpine arc. We propose that the mantle flow beneath this area could be influenced or perhaps controlled by the Alpine deep penetrative structures and that the Alpine lithospheric roots may have deflected part of the horizontal asthenospheric flow around its southernmost tip.
ISSN: 0040-1951

hal-00109313
https://hal.archives-ouvertes.fr/hal-00109313
https://hal.archives-ouvertes.fr/hal-00109313/document
https://hal.archives-ouvertes.fr/hal-00109313/file/barruol_TGRS_Tphy2004_hal.pdf
DOI : 10.1016/j.tecto.2004.08.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : Folds with hinge lines subparallel to stretching lineation are common features in shear zones and represent extreme cases of fold modification. However, their microstructures and in particular their kinematic significance remain poorly understood. Here we describe the meso- and micro-scale structures and crystallographic preferred orientation (CPO) of quartz and muscovite from a metric-scale shear-modified fold from Plattjen, Saas Fee, Western Internal Alps. The studied fold is of class-2 and the samples collected around the fold have essentially the same microstructures. Quartz [c]-axes plotted in the tectonic coordinate system exhibit an apparent reverse obliquity on opposing limbs. Muscovite fabrics are controlled essentially by the orientation of {001} planes. If the CPO data are plotted in a common reference frame (e.g. either fold or geographical), all samples exhibit essentially the same patterns for both minerals. In particular, relative to the fold axis and axial surface, the reversal of quartz CPO obliquity on opposing limbs is no longer evident. The small obliquity (~ 15°) between the intersection lineation of the two planes of {001} of muscovite and the fold axis results in the apparent reversal of shear sense on opposite limbs when viewing the CPO related to the macroscopic fabric. The homogeneity of the microstructures and CPOs of quartz and muscovite across the fold support the interpretation that the fold developed during simultaneous activation of heterogeneous and homogeneous simple shear, with the former responsible for fold development and the latter responsible for fold rotation and the overwhelming of the heterogeneous deformation. These processes led to the observed parallelism between fold hinge line and local stretching lineation.
ISSN: 0040-1951

hal-00824537
https://hal.archives-ouvertes.fr/hal-00824537
DOI : 10.1016/j.tecto.2011.03.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mediterranean geodynamic system is an exceptional natural laboratory to study the complexities of back-arc extension during subduction rollback. Corsica is a key locality that recorded the Alpine subduction-collision history followed by 30 Ma of the Apennines slab rollback, responsible for the successive opening, from West to East, of the Liguro-Provençal basin and the Tyrrhenian Sea. The overall strain pattern of the Alpine metamorphic units of Alpine Corsica is studied through a synthesis of i) available geological maps, ii) geochronological data and iii) newly acquired structural data relative to successive events of ductile and brittle extension, Three main stages of extension are recorded: 1/ Syn-metamorphic Oligocene extension accommodated by N140° trending ductile shear zones, that correspond to the reactivation of a major Alpine thrust; 2/ Burdigalian ramp-flat extension with N60°-70° trending fault zones that controlled the deposition of onshore piggy-back basins (e.g. St Florent basin), and 3/ Serravalian N-S trending fault zones. From a geodynamical point of view, these successive extensional deformations in Alpine Corsica can be correlated to the history of the Apennines slab rollback. The two first stages are related to a southeastward rollback of the Appennines slab that successively triggered: 1/ Continental rifting in Oligocene leading to the opening of the Liguro-Provençal basin and 2/ Burdigalian extension with N60°-70° trending fault zone, oblique to the Alpine thrust that, after a counterclockwise rotation of the Corso-Sardinian block, became unable to accommodate extension. Finally, the third stage that gave NS-trending fault zones developed in Serravalian, at the onset of Tyrrhenian rifting, related to an eastward rollback of the Apennines slab, as a response of slab tearing in Sicily.
ISSN: 0040-1951

insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859/document
https://hal-insu.archives-ouvertes.fr/insu-01424859/file/gueydan-tectonoph-2017.pdf
DOI : 10.1016/j.tecto.2016.12.028

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The ultramafic rocks of the Collo region in northeastern Algeria crop out as “stratified” masses that cut across older metamorphic formations of the Petite Kabylie basement. Based on petrological compositions and mineralogical observations, these rocks are mainly peridotites and serpentinites. The peridotites are identified as lherzolites, but dunites may occur rarely. The lherzolites are composed of olivine, orthopyroxene, clinopyroxene and chromian spinel. Their chemical composition shows high MgO (34.4–37.5 wt%), Cr (0.14–0.27 wt%), Ni (0.14–0.26 wt%) and Co (34–133 ppm) contents and low CaO and Al2O3 concentrations (0.02–2.2 wt% and 0.5 to 2.8 wt%, respectively). The chromite, which represents approximately 1–3% of the rock, is ubiquitous and shows two different generations: primary millimetric euhedral crystals and secondary fine xenomorphic grains and interstitial aggregates. The primary chromites are alumino-ferro-magnesian crystals that show high Al2O3 (25.77%–27.36%) and MgO (10.70%–13.36%). Cr# (100 × Cr/(Al + Cr)) ranges from 45 to 48, and Mg# (100 × Mg/(Mg + Fe2+)) from 49 to 59. The secondary interstitial grains are iron-rich chromites. They show low Al2O3 (4.67%–9.54%) and MgO (4.60%–4.65%). Cr# is relatively high (77–88), whereas Mg# shows relatively low values, ranging from 22 to 25. Primary chromite and whole-rock chemistry show that the Collo ultramafic rocks belong to Alpine-type peridotites that were emplaced within an orogenic setting. The oxygen isotopic composition of both peridotites and chromites is consistent with their derivation from a mantle source (δ18O ranges from +3.0 to +5.9‰). Low δ18O values (<+4.4‰) are recorded in serpentinites and are attributed to the effect of serpentinization processes through high-temperature metasomatic fluids. Magnesite-bearing serpentinites show the lowest δ18O values. These are interpreted as the result of surface water input.
ISSN: 0899-5362

hal-01468003
https://hal.archives-ouvertes.fr/hal-01468003
DOI : 10.1016/j.jafrearsci.2016.10.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study reports petrostructural observations in the pargasite and phlogopite-bearing Finero peridotite massif (Italian Western Alps), which suggest that the pervasive foliation in this massif was formed by deformation concomitant with percolation of hydrous Si-rich melts: (1) diffuse contacts, but systematic parallelism between the pyroxenitic layers and the foliation of the peridotite (2) strong shape and crystal preferred orientations (SPO and CPO), but subhedral or interstitial shapes and weak intracrystalline deformation of the hydrous phases, (3) CPO, but interstitial shapes of the pyroxenes, (4) very coarse olivine grain sizes, which are correlated to the olivine abundance, and (5) elongated shapes, but weak intracrystalline deformation, and extremely weak and highly variable CPO of olivine. The pervasive deformation of the Finero peridotite occurred therefore under conditions that allowed coexistence of H2O–CO2-bearing melts, pargasite, and spinel, that is, temperatures of 980–1080 °C and pressures <2 GPa. The petrostructural observations suggest that the presence of hydrous melts results in accommodation of large amounts of deformation by stress-controlled dissolution–precipitation and advective transport of matter by the melts and in fast grain boundary migration in olivine. By consequence, it produces significant rheological weakening. Water contents in olivine are <4 ppm wt., implying limited contribution of hydration of olivine to weakening. In addition, the analysis of protomylonites composing the external domains of the shear zones that overprint the pervasive foliation indicates that the transition to melt-free conditions results in enhanced contribution of dislocation creep to the deformation. The associated increase of the peridotites' strength leads to onset of strain localization. The latter is not correlated to the local abundance in pargasite or phlogopite, implying that crystallization of amphiboles or phlogopite, even at concentrations of 25 vol.%, does not produce rheological weakening in the upper mantle.
ISSN: 0012-821X

hal-01667879
https://hal.archives-ouvertes.fr/hal-01667879
DOI : 10.1016/j.epsl.2017.08.015

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
More than 10 years of geodetic measurements demonstrate an uplift rate of 1–3 mm/yr of the high topography region of the Western Alps. By contrast, no significant horizontal motion has been detected. Two uplift mechanisms have been proposed: (1) the isostatic response to denudation responsible for only a fraction of the observed uplift and (2) the rebound induced by the Wurmian ice cap melting which predicts a broader uplifting region than the one evidenced by geodetic observations. Using a numerical model to fit the geodetic data, we show that a crustal viscosity contrast between the foreland and the central part of the Alps, the latter being weaker with a viscosity of 1021 Pa s, is needed. The vertical rates are enhanced if the strong uppermost mantle beneath the Moho is interrupted across the Alps, therefore allowing a weak vertical rheological anomaly over the entire lithosphere.
ISSN: 0094-8276

hal-01332757
https://hal.archives-ouvertes.fr/hal-01332757
DOI : 10.1002/2016GL067821

Éditeur(s) : Ofioliti
Résumé : Serpentinisation of mantle rocks, leading to natural venting of hydrogen and methane, has been reported to occur at the global scale, wherever fluids percolate in ultramafic formations. Here we compare gas composition from two on-land, low-temperature, and hyper-alkaline springs hosted on ultramafic rocks in the ophiolite massifs of the Sultanate of Oman and the Ligurian Alps (Voltri Group, Genoa region, Northern Italy). These two settings exhibit similar chemical and mineralogical features but show diverse styles of gas venting. Commonly to all hyper-alkaline springs, gases are characterised by relatively high N-2, very low O-2 and CO2 concentrations, and a strong enrichment in H-2 and CH4. The comparison between Oman and Liguria highlights a high variability of the H-2/CH4 ratios whereby the gas phase of the Oman Ophiolite is enriched in H-2 whereas being CH4 enriched in the Voltri Ophiolite. These results combined with literature data define three groups that may reflect different stages of serpentinisation producing fluids from hydrogen-dominated to methane-dominated. The origin of these distinct groups might lie in the difference of the mineralogical composition of the rocks within which the fluids circulate, on the degree of alteration of the rocks and finally on the geological/metamorphic history of the ophiolite.
Ofioliti (0391-2612) (Ofioliti), 2013-12 , Vol. 38 , N. 2 , P. 143-156

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00175/28634/27059.pdf
DOI:10.4454/ofioliti.v38i2.423
http://archimer.ifremer.fr/doc/00175/28634/

Éditeur(s) : HAL CCSD
Résumé : This historical perspective provides an overall view of the main steps that led to the acceptance of the concept of mantle exhumation accompanying lithosphere stretching and extreme crustal thinning. We first remember that the presence of exposures of mantle rocks along oceanic spreading ridges was early reported in the 60's due to the results of sediment cores and dredge hauls collected along the Mid-Atlantic Ridge. In the meantime, detailed analysis of the relationships between oceanic sediments of Late Jurassic age and their primary basement in the Apennine ophiolites led many authors to point to the importance of exhumation of mantle rocks on ancient seafloors. By contrast to the thick sections of classical ophiolites (e.g. Oman), the Alpine-Corsican-Appennine ophiolites are characterized by a relatively small amount of mafic rocks (gabbros and basalts), by the absence of any sheeted dyke complex and by the frequent occurrence of oceanic sediments stratigraphically overlying mantle-derived peridotites and associated gabbroic intrusions. They display some of the characteristics of slow-spreading ridge systems, but, due to their highly tectonized character, they have been interpreted successively either as remnants of oceanic fracture zones of normal ocean or as remnants of very-poorly organized, abnormal oceanic basement. This review shows how the concept of mantle exhumation has been elaborated more or less in the same period both by marine geoscientists and by geologists conducting investigations in ophiolitic units of the Alps-Apennines mountain belt. Dredging and diving results from the Gorringe Bank, the Iberia margin, the Thyrrenian Sea and the Central Atlantic in the 1980's and 1990's provided additional proofs that the mantle is currently exhumed in various oceanic environments, including distal continental margins, back-arc basins and slow-spreading ridges of wide oceans. It is shown finally how renewed cross-information from mountain belts and the oceans, multiplying the examples of sedimentary reworking of mantle material, help better constrain the mechanisms of mantle exhumation. This mechanism progressively appeared as a fundamental step during the processes of extension of both continental and oceanic lithospheres in numerous geological situations worldwide.
Bollettino della Società Geologica Italiana

hal-00475653
https://hal.archives-ouvertes.fr/hal-00475653
DOI : 10.3301/IJG.2009.128.2.279

Éditeur(s) : HAL CCSD Wiley
Résumé : The routes through which Norway spruce recolonized the Alps after the last ice age were investigated at the genetic level. Seven populations along the Alpine range plus one Apennine population were characterized for seven sequence-characterized amplified region (SCAR) loci, detecting an overall FST = 0.118. This rather high value for forest species reflects an uneven distribution of genetic variability, and was analysed through different statistical methods. Alternative hypotheses were tested under the isolation-by-distance model and using the analysis of molecular variance (amova) frame. We conclude that the hypothesis of the existence of a glacial refugium in the Apennines should be rejected, while a putative relict population is identified in the Maritime Alps. The Alpine range of Norway spruce appears to be split in two parts across a north-south line. The results are discussed in comparison with data based on morphological markers, isozymes, chloroplast microsatellites and mitochondrial markers.
ISSN: 0962-1083

hal-01031243
https://hal.archives-ouvertes.fr/hal-01031243
DOI : 10.1046/j.1365-294x.2000.00911.x

Éditeur(s) : HAL CCSD
Résumé : Fault zones are major discontinuities in sedimentary basins. Understanding their role on fluid migrations is an essential issue to (i) characterize the mechanisms and kinematics of deformation and (ii) to determine the parameters which control the distribution of energetic or mineral resources. This work applies to faulting under a temperature range of 200-250°C, corresponding to that of deeply buried reservoirs as well as potentially seismogenic fault zones. The studied faults are normal faults affecting the “Grès d’Annot” Formation, a Priabonian-Rupelian siliclastic turbidite succession of the Alpine foreland basin. They are located in two distinct areas: the Moutière-Restefond area in the eastern part of the basin and the Estrop area in the western part. Vitrinite reflectance outside fault zones indicates maximal temperatures of 240-260°C at Moutière-Restefond and 170-200°C at Estrop, i.e. burial depths around 8 km and 6 km, respectively, assuming a mean geothermal gradient of 30°C/km. Burial was due to underthrusting below the Embrunais-Ubaye Alpine nappes, the difference in burial between the two areas traducing the westward taper of the nappe front.The studied faults affect alternating arkosic sandstone beds and pelite layers with offsets from centimeters to decameters. Two types of core zones are recognized: (1) the foliated core zones of the Moutière-Restefond area, where deformation dominated by pressure solution and synkinematic phyllosilicate neoformation resulted in a foliated fabric, and (2) the core zones of the Estrop area, characterized by dilatant quartz-mineralized veins and breccia. Fault and host rock petrophysical properties were measured on drill plugs, using the water porosity technique and nitrogen permeability technique under 2 Mpa of confining pressure. In the Moutière-Restefond fault zones, plug axes were oriented in three orthogonal directions corresponding to the main deformation axes (X, Y, Z) of the foliated arkose to characterize the effect of structural anisotropy. In the Estrop fault zones, where deformation does not show equivalent anisotropy, the plug axes were oriented according to the main fault plane orientation (i.e., parallel to azimuth, parallel to dip and normal). In each fault zone, the porosity of fault rocks is equivalent to that of host rocks. In the Moutière-Restefond fault zones, the plugs parallel to the X and Z axes of deformation have a permeability similar to that of the host rocks, whereas permeability parallel to the Y axis (i.e. parallel to the foliation and the main fault plane) is one order of magnitude higher. By contrast, the permeability values in the Estrop fault zones are isotropic and equivalent to the host rock values. This study highlights the importance of various types of deformation mechanisms and related fluid-rock interactions in determining different fault rock types within a similar protolith, ultimately controlling distinct petrophysical properties of fault zones.
Les zones de failles constituent des discontinuités majeures dans la croûte supérieure. Ce mémoire s’intéresse aux failles actives à des profondeurs de 5-8 km, i.e. dans des conditions pouvant jouer un rôle important (i) sur le comportement mécanique de de la croûte, en particulier sur son potentiel sismogénique et (ii) sur la compartimentation des réservoirs géologiques profondément enfouis.Les failles étudiées sont des failles normales (rejet jusqu’à 50 mètres) affectant des alternances de bancs de grès arkosiques et de pélites dans les Grès d’Annot, une formation turbiditique d’âge priabonien-rupélien du bassin d’avant-chaine alpin. Les Grès d’Annot ont été enfouis sous les nappes de l’Embrunais-Ubaye peu de temps après leur dépôt et exhumés au Miocène moyen-supérieur. L’étude a été réalisée dans deux secteurs des Alpes de Haute-Provence, (1) le secteur de l’Estrop (chaine des Trois Evéchés, dans la partie occidentale du bassin) et (2) le secteur de Point Vert-Restefond (alentours du col de la Bonette, dans la partie orientale du bassin). La réflectance de la vitrinite dans les Grès d’Annot indique des températures maximales de 160-190°C dans le secteur (1) et de 240-260 °C dans le secteur (2) , soit des profondeurs d’enfouissement de 5-6 km et 8-10 km, respectivement, dans l’hypothèse d’un gradient géothermique moyen de 25-30°C/km. A partir des observations microstructurales, de données d’inclusions de fluides, de modélisations thermodynamiques sur chlorites syncinématiques et des indices de cristallinité de l’illite, on a établi que les failles du secteur (1) ont fonctionné à une température d’environ 200°C pour une pression de 0.6Kbar et celles du secteur (2) dans une gamme de température de 200-220°C et de pression comprise entre 0.6 et 1.1 Kba. L’activité de la faille de Point-Vert a été datée par la méthode 40Ar/39Ar au Miocène inférieur (21 Ma). Ces failles sont interprétées comme associées aux premiers stades du soulèvement résultant de l’activité des chevauchements dans le socle sous-jacent.Deux types principaux de roches de failles caractérisent les failles étudiées. Les brèches dilatantes sont majoritaires dans les zones de failles du secteur (1) alors que les arkoses foliées sont majoritaires dans les zones de failles du secteur (2). Les brèches dilatantes témoignent de mécanismes de déformation dominés par la fracturation transgranulaire et la pression-solution des silicates. Ce dernier mécanisme se manifeste principalement par d’abondantes précipitations cycliques de quartz, les stylolites restant peu développés. Les géométries structurales sont associées à l’activation de plans T de Riedel déterminant l’ouverture de relais extensifs et un régime localement dilatant. Nous associons ce type de roche de faille à une faible pression effective au cours de la déformation.La déformation cisaillante exprimée dans les arkoses foliées témoigne de mécanismes de déformation dominés par (i) la fracturation intragranulaire et transgranulaire, (ii) la pressionsolution/ précipitation des silicates, principalement le quartz, (iii) la néoformation de micas blancs liée à l’altération des feldspaths et (iv) la précipitation de chlorite. Ce travail montre également que les transformations minéralogiques liées aux interactions fluide-roche dans la zone de faille (forte augmentation de la proportion des phyllosilicates au dépend des feldspaths) changent radicalementla composition minéralogique de la roche. Nous associons ce type de roche de faille à une forte pression effective au cours de la déformation.La pétrophysique montre que les brèches de failles (secteur 1) ont une perméabilité isotrope et équivalente à celle du protolithe (10-3mD sous 2 MPa de confinement) tandis que les roches foliées (secteur 2) montrent une augmentation de perméabilité (10-2mD) selon l’axe Y de la déformation, d’un ordre de grandeur supérieure aux perméabilités suivant les axes X et Z et dans la roche hôte (10-3mD). Ce drain préférentiel potentiel est associé à l’orientation des phyllosilicates dans la foliation.
https://hal.archives-ouvertes.fr/tel-01310382

tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382/document
https://hal.archives-ouvertes.fr/tel-01310382/file/Th%C3%A8seCAVAILHES2012.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We provide new insights into the geochemistry of serpentinites from the Alpine orogenic wedge representing a paleo-subduction zone. These serpentinites are derived from similar oceanic protoliths, but they have experienced different metamorphic conditions related to three different structural levels of the paleo-subduction zone ((1) obducted: Chenaillet ophiolite, (2) accretionary wedge: Queyras Schistes lustrés complex and (3) serpentinite channel: Monviso ophiolite). Metamorphism undergone by these three units is well defined, increasing eastward from sub-greenschist to eclogite facies conditions, and allows us to examine trace element behavior from the oceanic ridge environment to subduction. Serpentinites first record moderate trace element enrichment due to seawater interaction resulting in the replacement of olivine and pyroxene by chrysotile and lizardite below 300 °C. In the sediment-dominated accretionary wedge, serpentinites are strongly enriched in fluid-mobile-elements (B, Li, As, Sb, and Cs) and act as a trapping system following the metamorphic gradient (from 300 to 390 °C) up to total replacement of the lizardite/chrysotile assemblage by antigorite. Under higher temperature conditions (T > 390 °C), no enrichment was observed, and some fluid-mobile elements were released (B, Li, Cs, and Sr). Moreover, in the serpentinite channel (T > 460 °C), most of the fluid-mobile elements are absent due to the scarcity of metasediments which prevent geochemical exchange between metasediments and serpentinites. This is also due to the onset of antigorite breakdown and the release of fluid-mobile elements. Thus, we emphasize that the geochemistry of Alpine serpentinites is strongly dependent on (1) the grade of metamorphism and (2) the ability of metasediments to supply fluid-mobile elements. We conclude that serpentinites act as a trap-and-release system for fluid-mobile elements in a subduction context.
ISSN: 0009-2541

hal-00996839
https://hal.archives-ouvertes.fr/hal-00996839
DOI : 10.1016/j.chemgeo.2013.02.008

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : Combined petrographic study and apatite fission track analysis (apatite FTA) across the Gres d'Annot basin document maximum temperatures reached by this turbiditic sandstone formation, from around 60 degrees C at the SW basin margin up to around 200 degrees C below the Penninic frontal thrust, in relation to burial below the front of Alpine nappes. Increasing diagenetic grade across the basin is primarily expressed by the development of silica transfer by pressure solution and correlated porosity loss. We infer the nappe thickness profile, from the nappe front in the SW up to around 8-10 km in the NE. Apatite FTA dates exhumation of the Gres d'Annot during the Late Miocene, in relation to thrusting of the underlying Argentera and Barrot Palaeozoic massifs. This study illustrates the influence of thrust front propagation on foreland basin diagenesis and exhumation, and highlights potential implications for the evolution of sediment reservoir properties in this context.
ISSN: 0954-4879

hal-00411860
https://hal.archives-ouvertes.fr/hal-00411860
DOI : 10.1111/j.1365-3121.2008.00793.x

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : New structural data and P-T estimates of syn-deformational assemblages within the Beni Bousera peridotites and their crustal envelope are used to explain their Alpine exhumation. The Beni Bousera peridotites occur as thin sheets within high grade crustal units of the lower Sebtides (inner Rif, Morocco) and are composed of weakly deformed spinel lherzolite in the core of the massif and garnet-spinel mylonite at the rim. The main foliation trajectories in both the peridotites and overlying crustal units show systematic rotation towards their mutual contact, indicating a kilometer-scale top to the NW shearing with a dextral component along this crust/mantle contact. Widespread top to the NW shear criteria within the crustal units overlying the peridotite support this feature. Available ages constrain the development of the main foliation in both the peridotites and crustal rocks between 25 and 20 Ma. New P-T data from the peridotites show that deformation occurs during decompression from approximate to 22 kbar, 1050 degrees C to approximate to 9-15 kbar, 800 degrees C. As a consequence, exhumation of the Beni Bousera peridotites takes place during the Oligo-Miocene lithosphere thinning in the footwall of a lithospheric extensional shear zone. The exceptional preservation of garnet within the mylonitic peridotites results from rapid cooling of the border of the massif due to the juxtaposition with colder crustal rocks along this shear zone. Uplifting of the hot mantle rocks simultaneously induces high temperature metamorphism in the overlying crustal units. These new findings allow us to reconstruct the deformation history of the Beni Bousera region and the Alboran domain in the framework of the western Mediterranean geodynamics during the last 40 Myrs.. (C) 2011 Lavoisier SAS. All rights reserved
ISSN: 0985-3111

hal-00767654
https://hal.archives-ouvertes.fr/hal-00767654
DOI : 10.3166/ga.24.49-60

Éditeur(s) : HAL CCSD Elsevier
Résumé : In order to address the question of the processes involved during shear zone nucleation, we present a petro-structural analysis of millimetre-scale shear zones within the Roffna rhyolite (Suretta nappe, Eastern central Alps). Field and microscopic evidences show that ductile deformation is localized along discrete fractures that represent the initial stage of shear zone nucleation. During incipient brittle deformation, a syn-kinematic metamorphic assemblage of white mica + biotite + epidote + quartz precipitated at ca. 8.5 ± 1 kbar and 480 ± 50 °C that represent the metamorphic peak conditions of the nappe stacking in the continental accretionary wedge during Tertiary Alpine subduction. The brittle to ductile transition is characterized by the formation of two types of small quartz grains. The Qtz-IIa type is produced by sub-grain rotation. The Qtz-IIb type has a distinct CPO such that the orientation of c-axis is perpendicular to the shear fracture and basal and rhombhoedric slip systems are activated. These Qtz-IIb grains can either be formed by recrystallization of Qtz-IIa or by precipitation from a fluid phase. The shear zone widening stage is characterized by a switch to diffusion creep and grain boundary sliding deformation mechanisms. During the progressive evolution from brittle nucleation to ductile widening of the shear zone, fluid–rock interactions play a critical role, through chemical mass-transfer, metasomatic reactions and switch in deformation mechanisms.
ISSN: 0191-8141

hal-01355954
https://hal.archives-ouvertes.fr/hal-01355954
DOI : 10.1016/j.jsg.2016.02.015

Éditeur(s) : HAL CCSD
Résumé : CorseAlp 2011 was held in April 2011. A link to the website is here: CorseAlp 2011. The CorseAlp field trips were designed to introduce the participants to the general features of the geology of Alpine Corsica and to recent specific discoveries. The three-day post-workshop field trip (Field trip 2) focused on the general architecture of Alpine Corsica in an EW transect between the Balagne region and Bastia. First day: The internal zones of Alpine Corsica: from Bastia to Saint Florent. Intinerary: Saint Florent, Serra di Pigno, Cima Malaspina, Patrimonio, Saint Florent. Second day: The Tenda massif and its eastern margin. Intinerary: Saint Florent, Casta, Fontana Porragghia, Rue de Morello, Fontana a Murello quarry; Fornali. Third day: The external zones of Alpine Corsica in the Balagne region. Intineray: Saint Florent, Colle di U'Vezzu, Ostriconi, Belgodere, San Sebastiano Chapel, San Colombano, Ponte Leccia, Francardo, Bastia.
Journal of the Virtual Explorer

hal-00688971
https://hal.archives-ouvertes.fr/hal-00688971

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Carbon is transported from Earth's surface into its interior at subduction zones. Carbonates in sediments overlying hydrothermally altered rocks (including serpentinites) within the subducted slab are the main carriers of this carbon1. Part of the carbon is recycled back to the surface by volcanism, but some is transferred to the deep Earth1, 2. Redox transformations during shallow subduction control the transfer and long-term fate of carbon, but are poorly explored1, 3. Here we use carbon stable isotopes and Raman spectroscopy to analyse the reduction of carbonate in an exhumed serpentinite-sediment contact in Alpine Corsica, France. We find that highly crystalline graphite was formed during subduction metamorphism and was concentrated in the sediment, within a reaction zone in direct contact with the serpentinite. The graphite in this reaction zone has a carbon isotopic signature (δ13C) of up to 0.8±0.1‰, similar to that of the original calcite that composed the sediments, and is texturally associated with the calcium-bearing mineral wollastonite that is also formed in the process. We use mass-balance calculations to show that about 9% of the total carbonaceous matter in the sedimentary unit results from complete calcite reduction in the reaction zone. We conclude that graphite formation, under reducing and low-temperature conditions, provides a mechanism to retain carbon in a subducting slab, aiding transport of carbon into the deeper Earth.
ISSN: 1752-0894

hal-00903464
https://hal.archives-ouvertes.fr/hal-00903464
DOI : 10.1038/NGEO1827

Éditeur(s) : HAL CCSD
Résumé : Corsica is located in the Mediterranean sea, about 90 km from the Italian coast of Tuscany and 175 km from the French Riviera. This relatively large island stretches for 180 km in the north-south direction and 85 Km east-west. The rugged landscape, with a mean elevation of ca. 500 m and the highest point at 2710 m (Monte Cinto) is interrupted only by a major plain along the east coast. CorseAlp 2011 was held in April 2011. A link to the website is here: CorseAlp 2011. The CorseAlp field trips were designed to introduce the participants to the general features of the geology of Alpine Corsica and to recent specific discoveries. Field trip 1 focused on the geology of the Ocean-Continent Transition preserved in the Monte San Petrone, in Central Corsica, which was subducted to eclogite facies conditions during the Alpine orogeny. The three days post-workshop field trip (Field trip 2) focused on the general architecture of Alpine Corsica in an EW transect between the Balagne region and Bastia. The main topics of Field trip 1 and 2 allow discussion about the overall evolution of Alpine Corsica in the framework of Mediterranean geodynamics, with a focus on the most controversial aspects.
Journal of the Virtual Explorer

hal-00688965
https://hal.archives-ouvertes.fr/hal-00688965

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Convergent plate margins typically experience a transition from subduction to collision dynamics as massive continental blocks enter the subduction channel. Studies of high-pressure rocks indicate that tectonic fragments are rapidly exhumed from eclogite facies to mid-crustal levels, but the details of such dynamics are controversial. To understand the dynamics of a subduction channel we report the results of a petrochronological study from the central Sesia Zone, a key element of the internal Western Alps. This comprises two polymetamorphic basement complexes (Eclogitic Micaschist Complex and Gneiss Minuti Complex) and a thin, dismembered cover sequence (Scalaro Unit) associated with pre-Alpine metagabbros and metasediments (Bonze Unit). Structurally controlled samples from three of these units (Eclogitic Micaschist Complex and Scalaro-Bonze Units) yield unequivocal petrological and geochronological evidence of two distinct high-pressure stages. Ages (U-Th-Pb) of growth zones in accessory allanite and zircon, combined with inclusion and textural relationships, can be tied to the multi-stage evolution of single samples. Two independent tectono-metamorphic 'slices' showing a coherent metamorphic evolution during a given time interval have been recognized: the Fondo slice (which includes Scalaro and Bonze rocks) and the Druer slice (belonging to the Eclogitic Micaschist Complex). The new data indicate separate stages of deformation at eclogite-facies conditions for each recognized independent kilometer-sized tectono-metamorphic slice, between ∼85 and 60 Ma, with evidence of intermittent decompression (ΔP ∼ 0*5 GPa) within only the Fondo slice. The evolution path of the Druer slice indicates a different P-T-time evolution with prolonged eclogite-facies metamorphism between ∼85 and 75 Ma. Our approach, combining structural, petrological and geochronological techniques, yields field-based constraints on the duration and rates of dynamics within a subduction channel.
ISSN: 0022-3530

hal-01054335
https://hal.archives-ouvertes.fr/hal-01054335
DOI : 10.1093/petrology/egu029