Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic wedges locally present chaotic tectonostratigraphic units that contain exotic blocks of various size, origin, age and lithology, embedded in a sedimentary matrix. The occurrence of ophiolitic blocks, sometimes huge, in such “mélanges” raises questions on (i) the mechanisms responsible for the incorporation of oceanic basement rocks into an accretionary wedge and (ii) the mechanisms allowing exhumation and redeposition of these exotic elements in “mélanges” during wedge growth.To address these questions, we present the results of a series of analogue experiments performed to characterize the processes and parameters responsible for accretion, exhumation and tectonosedimentary reworking of oceanic basement lithospheric fragments in an accretionary wedge.The experimental setup is designed to simulate the interaction between tectonics, erosion and sedimentation. Different configurations are applied to study the impact of various parameters, such as irregular oceanic floor due to structural inheritance, or the presence of layers with contrasted rheology that can affect deformation partitioning in the wedge (frontal accretion vs basal accretion) influencing its growth. Image correlation technique allows extracting instantaneous velocity field, and tracking of passive particles. By retrieving the particle paths determined from models, the pressure-temperature path of mélange units or elementary blocks can be discussed. The experimental results are then compared with observations from ophiolite-bearing mélanges in Taiwan (Lichi and Kenting mélanges) and Raman spectroscopy of carbonaceous material (RSCM) Thermometry data on rocks from the northern Apennines (Casanova mélange). A geological scenario is proposed following basic observations. The tectonic evolution of the retroside of doubly vergent accretionary wedges is mainly controlled by backthrusting and backfolding. The retro wedge is characterized by steep slopes that are prone to gravitational instabilities. It triggers submarine landslides inducing huge mass transfers. This erosion combined with backthrusting could favour exhumation of the ophiolitic fragments formerly accreted at the base of the wedge along the rough seafloor-sediments interface. Such an exhumed material can be reworked and deposited as debris- flows in proximal basins located at the foot of the retrowedge slope forming a tectono-sedimentary mélange. These syntectonic basins are continuously deformed and involved in prograding backthrusting-induced deformation.
ISSN: 0264-3707

hal-01395127
https://hal.archives-ouvertes.fr/hal-01395127
DOI : 10.1016/j.jog.2016.05.008

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Estimating how topography is maintained provides insights into the different factors responsible for surface deformations and their relative roles. Here, we develop a new and simple approach to assess the degree of isostatic compensation of continental topography at regional scale from GOCE gravity gradients. We calculate the ratio between the radial gradient observed by GOCE and that calculated from topography only. From analytical and statistical formulations, simple relationships between this ratio and the degree of compensation are obtained under the Airy–Heiskanen isostasy hypothesis. Then, a value of degree of compensation at each point of study area can be easily deduced. We apply our method to the Alaska-Canada Cordillera and validate our results by comparison with a standard isostatic gravity anomaly model and additional geophysical information for this area. Both our GOCE-based results and the isostatic anomaly show that Airy–Heiskanen isostasy prevails for the Yukon Plateau whereas additional mechanisms are required to support topography below the Northwest Territories Craton and the Yakutat collision zone.
ISSN: 0956-540X

hal-01467540
https://hal.archives-ouvertes.fr/hal-01467540
https://hal.archives-ouvertes.fr/hal-01467540/document
https://hal.archives-ouvertes.fr/hal-01467540/file/cadioGJI2016.pdf
DOI : 10.1093/gji/ggw281

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Displacement-length data from dilatant fractures (joints, veins, igneous dikes) and several varieties of deformation bands were analyzed statistically to investigate the applicability of mechanical models proposed for their formation. All 17 datasets are generally consistent with equilibrium or long-term power-law slopes on the displacement-length diagram of either 1.0 or 0.5. Similar to many faults, disaggregation deformation bands are consistent with a power-law scaling relation having a slope of approximately c = 1, implying a linear dependence of maximum displacement and discontinuity length (Dmax = γL). In contrast, dilatant fractures, cataclastic deformation bands, and shear-enhanced compaction bands are consistent with a power-law scaling relation with a slope of approximately c = 0.5, implying a dependence of maximum displacement on the square root of length (Dmax = αL1/2). The scaling relations represent an average, or long-term equilibrium outcome of deformation for conditions such as length-scale, time-scale, temperature, chemistry, and an effectively homogeneous far-field stress field, allowing for variations such as rapid and/or localized behaviors. The displacement-length scaling of these geologic structures follows systematic relationships that provide information on host-rock properties and the physics of fracture and deformation-band propagation.
ISSN: 0191-8141

hal-00818130
https://hal.archives-ouvertes.fr/hal-00818130
DOI : 10.1016/j.jsg.2012.12.005

Éditeur(s) : HAL CCSD
Résumé : International audience
The strength of the lithospheric mantle controls the mode of lithosphere deformation: the presence or absence ofa high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysicaldata question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling toquantify the impact of a ductile localizing mantle – instead of brittle – in triggering continental rifting. As a novelty,the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction,which may promote a significant strength drop and subsequent strain localization at low mantle temperature (<700-800°C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting thatmainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. Amedium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding tonarrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductilelocalizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at largestrain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting,although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geologicaland mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustalfaulting that are commonly observed in nature.
EGU General Assembly 2014
Vienne, Austria

insu-01565161
https://hal-insu.archives-ouvertes.fr/insu-01565161

Éditeur(s) : HAL CCSD
Résumé : In Taiwan , the subduction of the Chinese continental margin under the Luzon arc results in the progressive growth of an active orogenic wedge. It is one of the best places to study the complex relationships that occurs between the tectonic processes controlling deformation (plate rheology and kinematics, metamorphism and magmatism) and surface processes (erosion and sedimentation). In order to study the kinematics of the present day convergence of Philippine Sea plate to the Asian continent around Taiwan, we perform 2D and 3D sandbox modeling and we analyzed the models with PIV (Particle Image Velocimetry) software. In 2D experiments, a model Coulomb wedge is submitted to erosion and sedimentation under topography and flux steady state conditions. The 3D experiments are mainly used to study the escape tectonics occurring in the middle west and southwest Taiwan. A wedge shaped indenter and a basement relief were used to simulate the mechanical plate boundary between Philippine Sea plate and Eurasia plate and the basement topography to the west of Taiwan respectively. We examine the exhumation patterns, the mode of fault propagation and displacement patterns by strain partitioning of vertical vs. horizontal displacement and convergent parallel vs. orogen parallel components. The preliminary conclusions are: 1. The interactions between tectonics, erosion and sedimentation control geometry and kinematics of the doubly vergent transpressional orogen. 2. Exhumation processes are controlled by the balance between erosion, frontal accretion and underplating in different structural domains of the wedge. 3. Retrowedge erosion favorites backfolding and backthrusting, induces flower structures and fan shaped cleavage distribution. 4. Sedimentation promotes underplating and out-of sequences thrusting. 5. Continental subduction or subduction of topographic highs will enhance underthrusting/underplating, thick-skin tectonics and inversion of sedimentary basin.
Bolletino di Geofisica teorica ed applicata

hal-00411133
https://hal.archives-ouvertes.fr/hal-00411133

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox modeling is used to study the deformation of accretionary wedges caused by the subduction of oceanic ridges. The first experiment incorporates a massive ridge within a sand wedge. The wedge thickens and shortens when the forward propagation of the basal decollement ceases. The wedge thickening results in taper change, reactivation of preexisting thrusts, and retreat of the frontal part of the sand wedge. Similar mechanisms may have affected some margins that have undergone ridge subduction such as the Tonga margin after the subduction of the oblique Louisville oceanic ridge. The second experiment shows the effects of an active basement thrust slice as it enters a subduction zone. This process may have happened in the eastern Nankai accretionary wedge. Initially, the wedge in this experiment behaved similarly to that of the first experiment. Rapidly the topographic slope changed, the wedge thickened above the basement slice generating a slope break in the topography; a deeper propagating accretionary wedge again characterized by a small taper developed. These results, when compared with observations made in the Eastern Nankai Trench, are in agreement with the past subduction of a basement thrust slice in this area.
ISSN: 0278-7407

hal-01261549
https://hal.archives-ouvertes.fr/hal-01261549
https://hal.archives-ouvertes.fr/hal-01261549/document
https://hal.archives-ouvertes.fr/hal-01261549/file/Lallemand_et_al-1992-Tectonics.pdf
DOI : 10.1029/92TC00637

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The dating of the uplift onset of the Mongolian mountain ranges, the northernmost relief associated with the India-Eurasia convergence, is a fundamental issue to better understand the mechanisms of propagation of the Cenozoic transpressive deformation in Central Asia. Using apatite fission tracks we determined the timing and strain rates of the tectonics affecting the Gurvan Bogd system, in the Gobi-Altay, since the Middle Mesozoic to the Late Cenozoic. The region was firstly affected by a Lower-Middle Jurassic tectonic phase, characterized by a vertical crustal movement larger than 2 km. Then followed a protracted period without major crustal vertical movements until the last uplift phase. The peneplanation of the Jurassic relief produced an erosional surface that has undergone negligible denudation or sedimentation for more than 100 Ma. This same surface corresponds to the present summit plateaux of the massifs, standing about 2000 m above the surrounding region, which corresponds to the vertical movement produced by the ongoing uplift. Modelling of fission track data from the massifs of Ih Bogd and Baga Bogd shows that this uplift phase probably started at 5 ± 3 Ma. The Gobi-Altay mountain range appears therefore as one of the youngest mountain ranges in Central Asia, which is consistent with the idea of a northward propagation of the transpressional deformation from the Himalayan front to the Siberian craton. The Cenozoic uplift rate of the massifs is estimated to be between 0.25 and 1 mm/yr, which is slightly higher than the upper Pleistocene vertical slip rates of the bordering faults. This suggests that thrust faults observed within the massifs would increase the uplift rate inside the massifs compared to the uplift rate determined at their boundaries.
ISSN: 0012-821X

insu-00191116
https://hal-insu.archives-ouvertes.fr/insu-00191116
DOI : 10.1016/j.epsl.2007.04.047

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Rainbow is a dome-shaped massif at the 36°14′N nontransform offset along the Mid-Atlantic Ridge. It hosts three ultramafic-hosted hydrothermal sites: Rainbow is active and high temperature; Clamstone and Ghost City are fossil and low temperature. The MoMARDREAM cruises (2007, 2008) presented here provided extensive rock sampling throughout the massif that constrains the geological setting of hydrothermal activity. The lithology is heterogeneous with abundant serpentinites surrounding gabbros, troctolites, chromitites, plagiogranites, and basalts. We propose that a W dipping detachment fault, now inactive, uplifted the massif and exhumed these deep-seated rocks. Present-day deformation is accommodated by SSW-NNE faults and fissures, consistent with oblique teleseismic focal mechanisms and stress rotation across the discontinuity. Faults localize fluid flow and control the location of fossil and active hydrothermal fields that appear to be ephemeral and lacking in spatiotemporal progression. Markers of high-temperature hydrothermal activity (∼350°C) are restricted to some samples from the active field while a more diffuse, lower temperature hydrothermal activity (<220°C) is inferred at various locations through anomalously high As, Sb, and Pb contents, attributed to element incorporation in serpentines or microscale-sulfide precipitation. Petrographic and geochemical analyses show that the dominant basement alteration is pervasive peridotite serpentinization at ∼160–260°C, attributed to fluids chemically similar to those venting at Rainbow, and controlled by concomitant alteration of mafic-ultramafic units at depth. Rainbow provides a model for fluid circulation, possibly applicable to hydrothermalism at oceanic detachments elsewhere, where both low-temperature serpentinization and magmatic-driven high-temperature outflow develop contemporaneously, channeled by faults in the footwall and not along the detachment fault.
ISSN: 1525-2027

hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281/document
https://hal.archives-ouvertes.fr/hal-01115281/file/Andreani_et_al-2014-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2014GC005269

Éditeur(s) : HAL CCSD Taylor & Francis: STM Behavioural Science and Public Health Titles Taylor & Francis: STM, Behavioural Science and Public Health Titles
Résumé : We have investigated by electron tomography, in a transmission electronic microscope, the interactions between dislocations in olivine single crystals and polycrystals deformed in axial compression at T < 1000 °C (T < 0.5Tm). Dislocations are mostly of the [0 0 1] type, except in the polycrystal where [1 0 0] and [0 0 1] dislocations have been activated. A few 〈1 0 1〉 junctions have been found and characterized. Many collinear interactions have been identified either involving direct interactions between crossing dislocations of opposite Burgers vectors or indirect interactions between dislocations gliding in parallel planes and sessile dislocation loops. We suggest that collinear interaction, already identified as the primary source of strain hardening in FCC metals, is the main dislocation interaction mechanism in olivine deformed at temperatures below 1000 °C.
ISSN: 1478-6443

hal-01174166
https://hal.archives-ouvertes.fr/hal-01174166
DOI : 10.1080/14786435.2014.1000996

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] This article presents (U-Th)/He thermochronological data from the Longmen Shan belt, eastern Tibet. Located between the Songpan-Garze terrane and the Yangtze craton, this mountain range is one of the steepest margins of the Tibetan Plateau and an important area for the comprehension of the mechanisms that control the dynamics of such plateau borders in terms of spatial distribution of deformation or timing of topographic building. We describe several age-elevation transects and perform forward modeling of our data to derive quantitative information on the exhumation of the range. A major phase of exhumation started at 8–11 Ma, with an average rate of $0.65 mm a À1. Comparison of zircon and apatite ages indicates that the eastern part of the range may have experienced a significant decrease in exhumation since 2–3 Ma. We use the distribution of finite exhumation across the major faults of the area to quantify their dip-slip throw rate over the last 10 Ma. The Beichuan Fault, which was activated during the 2008 Sichuan earthquake, is the major active structure of the Longmen Shan since the late Miocene, with an average thrusting slip rate between 0.4 and 1 mm a À1. Conversely, over the same time period, only minor dip-slip activity occurred on the Wenchuan Fault Zone. This distribution in space and time of exhumation and deformation is discussed and compared to the different proposed models for the geodynamical evolution of the eastern Tibetan margin. It also provides an important long-term perspective to put in context the destructive 2008 Sichuan earthquake that struck the central Longmen Shan.
ISSN: 0278-7407

hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059/document
https://hal-amu.archives-ouvertes.fr/hal-01577059/file/godard2009late.pdf
DOI : 10.1029/2008TC002407

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep-seated gravitational spreading (DSGS) affects the slopes of formerly glaciated mountain ridges. On Mars, DSGS has played a key role in shaping the landforms of the giant Valles Marineris troughs. Though less spectacular, DSGS is common in terrestrial orogens, where understanding its mechanics is critical in the light of the ongoing climate change because it is a potential source of catastrophic landslides in deglaciated valleys. We conducted parametric numerical studies in order to identify important factors responsible for DSGS initiation. DSGS models are computed using an elastoviscoplastic finite element code. Using ADELI's software, we reproduce topographic ridge spreading under the effect of valley unloading. Two types of spreading topographic ridges are investigated, homogeneous or with horizontal rheological layering. We find that gravitational instabilities are enhanced by high slopes, which increase gravitational stress, and low friction and cohesion, which decrease yield stress. In the unlayered ridge, instability is triggered by glacial unloading with plastic strain concentration inside the ridge and at the base of the high slopes. Vertical fractures develop in the upper part of the slope, potentially leading to fault scarps. Ridge homogeneity promotes a deformation mode controlled by uphill-facing normal faulting and basal bulging. In the second case, the ridge encompasses horizontal geological discontinuities that induce rock mass anisotropy. Discontinuity located at the base of the slope accumulates plastic strain, leading to the formation of a sliding plane evolving into a landslide. The presence of a weak layer at ridge base therefore promotes another slope deformation mode ending up with catastrophic failure. Mechanical conditions and slope height being equal, these conclusions can probably be extrapolated to Earth. Compared with Mars, DSGS on Earth is inhibited because terrestrial topographic gradients are lower than in Valles Marineris, an effect counterbalanced by increased gravitational stress, where the intensity of deformation is enhanced because of the Earth gravity potential.
ISSN: 0169-555X

hal-01420007
https://hal.archives-ouvertes.fr/hal-01420007
DOI : 10.1016/j.geomorph.2016.06.011

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Present Address : ISTO - UMR7327
International audience
The pre-rift Mesozoic sequences of the Cretaceous passive margins fossilized in the North Pyrenean Zone (NPZ) are characterized by high temperature deformation in relation with thinning of the continental basement. Our compilation of chronological and geological data confirms a clear correlation between the distribution of the highest paleotemperatures in the pre-rift sedimentary cover and the loci of extreme crustal stretching. Geological evidences such as the occurrence of peridotite bodies directly underlying metamorphic pre-rift sediments indicate an early attenuation of the rifted continental crust. This leads us to propose a mechanism of rifting involving boudinage of the continental crust. The lateral extraction of the Paleozoic basement occurred under the pre-rift cover that is decoupled on the Triassic clays and evaporates. The thermal conditions allowing coeval ductile deformation of the crust and of the pre-rift sediments leaded to the widening of basins devoid of large faulted blocks. We discuss the implications on the origin and significance of the granulites and the relations between flysch deposition and high temperature metamorphism of the pre-rift sediments. In the NPZ, Albian-Cenomanian flysch sequences were deposited synchronously with the syn-metamorphic ductile deformation of the pre-rift sequences. Since the base of the flysch deposits also recorded locally the high-temperature tectonic event, we propose an original mechanism for the evolution of the basins involving continuous deformation of the pre-rift metamorphic sediments. At the scale of the Pyrenean domain, our results suggest a strong lateral variability in the tectonic style of passive margins, in direct link with their thermic pattern
ISSN: 0278-7407

insu-01017432
https://hal-insu.archives-ouvertes.fr/insu-01017432
https://hal-insu.archives-ouvertes.fr/insu-01017432/document
https://hal-insu.archives-ouvertes.fr/insu-01017432/file/tect20164.pdf
DOI : 10.1002/2013TC003471

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this study, we propose a theoretical approach to test the validity of the isomechanical analogues for post-perovskite structures. Intrinsic plastic properties are evaluated for three materials exhibiting a post-perovskite phase: MgSiO3, MgGeO3 and CaIrO3. Dislocation properties of each structure are determined using the Peierls-Nabarro model based on first-principles calculations of generalised stacking fault and the plastic properties are extended to crystal-preferred orientations using a visco-plastic self-consistent method. This study provides intrinsic parameters of plastic deformation such as dislocation structures and Peierls stresses that can be directly compared between the three materials. It appears that it is very difficult to draw any simple conclusions on polycrystalline deformation simply by comparing single crystal properties. In particular, contrasting single crystal properties of MgSiO3 and CaIrO3 lead to similar crystal-preferred orientation of the polycrystal aggregates.
ISSN: 0031-9201

hal-00420104
https://hal.archives-ouvertes.fr/hal-00420104
DOI : 10.1016/j.pepi.2008.04.003

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Apatite fission track analysis (AFTA) data are used to bring new light on the long-term and recent history of the Baikal rift region (Siberia). We describe the evolution of the topography along a NW-SE profile from the Siberian platform to the Barguzin range across the Baikal-southern Patom range and the northern termination of Lake Baikal. Our results show that the Baikal-Patom range started to form in the Early Carboniferous and was reactivated in Middle Jurassic-Lower Cretaceous times during the orogenic collapse of the Mongol-Okhotsk belt. Samples located in the Siberian platform recorded a continuous sedimentation up to the early Carboniferous but remain unaffected by later tectonic episodes. The Barguzin basin probably started to form as early as Late Cretaceous, suggesting a continuum of deformation between the postorogenic collapse and the opening of the Baikal Rift System (BRS). The initial driving mechanism for the opening of the BRS is thus independent from the India-Asia collision. AFTA show a late Miocene-early Pliocene increase in tectonic extension in the BRS that confirms previous thoughts and might reflect the first significant effect of the stress field generated by the India-Asia collision.
ISSN: 0278-7407

hal-00420895
https://hal.archives-ouvertes.fr/hal-00420895
DOI : 10.1029/2008TC002404

Éditeur(s) : HAL CCSD
Résumé : International audience
The deformation of natural systems in response to subsurface water storage and redistribution provides insightsinto the main water flow path within heterogeneous systems, including the role of faults or fractures. A longbaseline tiltmeter was installed in the low-noise underground laboratory of Rustrel (LSBB) to study the responseof the Fontaine de Vaucluse (FDV) karst hydrosystem to water cycle. Tilt data and piezometric levels recorded in aborehole close to the LSBB show a strong correlation with the discharge of the system observed at the FDV spring30 km away. Over several months, tilt data were recorded on three base lines, thus allowing, for the first time,to study the tilt gradient variation that appears homogeneous. Such information provides a significant constrainton hydrological processes leading to the measured deformation. Several deformation models were tested usingthe ADELI code to estimate the type of hydro-mechanical structure that could reproduce the measured tilt andits gradient. On one hand, models show that uniform loading at the surface produces a much smaller signal thanobserved on measured data. On the other hand, the deformation related to the filling of a fracture following aprecipitation event requires unrealistic fracture size. Finally, we found that a suitable hydro-mechanical modelcorresponds to the loading of numerous fractures at the interface between the saturated and unsaturated zones. Sucha configuration predicts a tilt distribution in agreement with observations. This study suggests that tilt networksinto a karst system should provide key observation for deciphering hydrological processes
Geophysical Research Abstracts
Vienne, Austria

insu-01308594
https://hal-insu.archives-ouvertes.fr/insu-01308594

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Mechanisms that control seismic activity in low strain rate areas such as western Europe remain poorly understood. For example, in spite of low shortening rates of <0.5 mm/ yr, the Western Alps and the Pyrenees are underlain by moderate but frequent seismicity detectable by instruments. Beneath the elevated part of these mountain ranges, analysis of earthquake focal mechanisms indicates extension, which is commonly interpreted as the result of gravitational collapse. Here we show that erosional processes are the predominant control on present-day deformation and seismicity. We demonstrate, using fi nite element modeling, that erosion induces extension and rock uplift of the elevated region of mountain ranges accommodating relatively low overall convergence. Our results suggest that an erosion rate of ~1 mm/yr can lead to extension in mountain ranges accommodating signifi cant shortening of <3 mm/yr. Based on this study, the seismotectonic framework and seismic hazard assessment for low strain rate areas need to be revisited, because erosion-related earthquakes could increase seismic hazard.
ISSN: 0091-7613

insu-00817341
https://hal-insu.archives-ouvertes.fr/insu-00817341
DOI : 10.1130/G33942.1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Large-scale periodic undulations within the oceanic and continental lithospheres revealed by a number of observations, are often treated as compressive instabilities, i.e. lithospheric buckling or folding. These undulations are normally associated with intensive faulting, which raises questions on the role of faulting in the folding process, and even on the possibility of folding in highly faulted media. In this study, we demonstrate that folding can "survive" faulting and that both processes may develop concurrently, so that faulting may serve as a mechanism of folding in the brittle domain. We support this hypothesis by direct numerical modeling. The results are compared with the data on three most prominent and well-known cases of the oceanic and continental folding-like deformation ("Indian Ocean" type, "Western Gobi (central Asia)" type and "Central Australian" type). We demonstrate that under reasonable tectonic stresses, folds can develop from faults cutting through the brittle parts of the lithosphere. The predicted wavelengths and nite growth rates are in agreement with the observations. We also show that within a continental lithosphere with thermotectonic age greater than 400 My, either a bi-harmonic mode (two superimposed wavelengths, crustal and mantle one) or a coupled mode (mono-layer deformation) of inelastic folding can develop, depending on the strength and thickness of the lower crust.
ISSN: 0094-8276

ird-00388016
http://hal.ird.fr/ird-00388016
http://hal.ird.fr/ird-00388016/document
http://hal.ird.fr/ird-00388016/file/fig3.pdf
http://hal.ird.fr/ird-00388016/file/fig1.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Leg ulcer is a disabling complication in patients with sickle cell anemia (SCA) but the exact pathophysiological mechanisms are unknown. The aim of this study was to identify the hematological and hemorheological alterations associated with recurrent leg ulcers. Sixty-two SCA patients who never experienced leg ulcers (ULC-) and 13 SCA patients with a positive history of recurrent leg ulcers (ULC+) - but with no leg ulcers at the time of the study - were recruited. All patients were in steady state condition. Blood was sampled to perform hematological, biochemical (hemolytic markers) and hemorheological analyses (blood viscosity, red blood cell deformability and aggregation properties). The hematocrit-to-viscosity ratio (HVR), which reflects the red blood cell oxygen transport efficiency, was calculated for each subject. Patients from the ULC+ group were older than patients from the ULC- group. Anemia (red blood cell count, hematocrit and hemoglobin levels) was more pronounced in the ULC+ group. Lactate dehydrogenase level was higher in the ULC+ group than in the ULC- group. Neither blood viscosity, nor RBC aggregation properties differed between the two groups. HVR was lower and RBC deformability tended to be reduced in the ULC+ group. Our study confirmed increased hemolytic rate and anemia in SCA patients with leg ulcers recurrence. Furthermore, our data suggest that although systemic blood viscosity is not a major factor involved in the pathophysiology of this complication, decreased red blood cell oxygen transport efficiency (i.e., low hematocrit/viscosity ratio) may play a role.
ISSN: 1932-6203

inserm-00922105
http://www.hal.inserm.fr/inserm-00922105
http://www.hal.inserm.fr/inserm-00922105/document
http://www.hal.inserm.fr/inserm-00922105/file/2013_Connes_-_Decreased_Hematocrit.pdf
DOI : 10.1371/journal.pone.0079680

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The seismological study of recent seismic crises near Oleron Island confirms the coexistence of an extensional deformation and a transtensive regime in the Atlantic margin of France, which is different from the general western European stress field corresponding to a strike-slip regime. We argue that the switch of the principal stress axes σ1/σ2 in a NW-SE vertical plane is linked with the existence of crustal heterogeneities. Events of magnitude larger than 5 sometimes occur along the Atlantic margin of France, such as the 7 September 1972 (ML = 5.2) earthquake near Oleron island and the 30 September 2002 (ML = 5.7) Hennebont event in Brittany. To test the mechanism of local strain localization, we model the deformation of the hypocentral area of the Hennebont earthquake using a 3D thermo-mechanical finite element code. We conclude that the occurrence of moderate earthquakes located in limited parts of the Hercynian shear zones (as the often reactivated swarms near Oleron) could be due to local reactivation of pre-existing faults. These sporadic seismic ruptures are favoured by stress concentration due to rheological heterogeneities.
ISSN: 1631-0713

hal-00936220
https://hal.archives-ouvertes.fr/hal-00936220
DOI : 10.1016/j.crte.2013.07.004