Éditeur(s) : HAL CCSD IEEE
Résumé : International audience
Recent works display that large scale image classification problems rule out computationally demanding methods. On such problems, simple approaches like k-NN are affordable contenders, with still room space for statistical improvements under the algorithmic constraints. A recent work showed how to leverage k-NN to yield a formal boosting algorithm. This method, however, has numerical issues that make it not suited for large scale problems. We propose here an Adaptive Newton-Raphson scheme to leverage k-NN, N³, which does not suffer these issues. We show that it is a boosting algorithm, with several key algorithmic and statistical properties. In particular, it may be sufficient to boost a subsample to reach desired bounds for the loss at hand in the boosting framework. Experiments are provided on the SUN, and Caltech databases. They confirm that boosting a subsample -- sometimes containing few examples only -- is sufficient to reach the convergence regime of N³. Under such conditions, N³ challenges the accuracy of contenders with lower computational cost and lower memory requirement.
IEEE International Workshop on Machine Learning for Signal Processing
Southampton, United Kingdom

hal-00959125
https://hal.archives-ouvertes.fr/hal-00959125
https://hal.archives-ouvertes.fr/hal-00959125/document
https://hal.archives-ouvertes.fr/hal-00959125/file/BNNB_mlsp2013.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
1. The Before-After Control-Impact Paired Series (BACIPS) design distinguishes natural spatial and temporalvariability from variation induced by an environmental impact (or intervention) of interest. BACIPS is a powerfultool to derive inferences about interventions when classic experimental approaches (e.g. which rely on spatialreplicates and random assignment of treatments) are not feasible or desirable. Previously applied BACIPSdesigns generally assume that effects are sudden, constant and long-lived: that is, that systems exhibit ‘stepchanges’in response to interventions. However, complex ecological interactions or gradual interventions maycreate delayed and/or progressive responses, potentially impeding the reliability of classic (step-change) analyses.2. We propose a novel approach, the Progressive-Change BACIPS, which generalizes and expands the scope ofBACIPS analyses.We evaluate the relative performance of this approach using both simulated and real data thatexhibit step-change, linear, asymptotic and sigmoid responses following an intervention.We quantify the statisticalpower and accuracy of the Progressive-Change BACIPS under varying initial population densities, intensityof spatial sampling, effect sizes and number of sampling dates After the intervention.3. We show that Progressive-Change BACIPS identified the correct model among the set of candidate modelsunder most conditions and led to accurate estimates of the parameters that were used to generate the simulateddata. When data were sparse, and the dynamics complex, simpler (more parsimonious) models were favouredover the more complex models that actually generated the simulated data. Application of the Progressive-Change BACIPS to existing data sets from the literature led to strong support for specific models (over alternatives)and led to more specific inferences than possible under the classic BACIPS approach.4. The Progressive-Change BACIPS proposed here is more flexible than the original BACIPS formulationbecause the data are used to inform the form of the final model, rather than having the form of the modelimposed on the data. This leads to better estimates of the effects of environmental impacts and the time-scalesover which they operate. As a result, the Progressive-Change BACIPS should be applicable to a wide range ofstudies and should help improve investigation of time-dependent effects. R code to perform Progressive-ChangeBACIPS analysis is provided.
ISSN: 2041-210X

hal-01416668
https://hal-univ-perp.archives-ouvertes.fr/hal-01416668
DOI : 10.1111/2041-210X.12655

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To improve earthquake location, we create a 3-D a priori P-wave velocity model (3-DVM) that approximates the large velocity variations of the Ecuadorian subduction system. The 3-DVM is constructed from the integration of geophysical and geological data that depend on the structural geometry and velocity properties of the crust and the upper mantle. In addition, specific station selection is carried out to compensate for the high station density on the Andean Chain. 3-D synthetic experiments are then designed to evaluate the network capacity to recover the event position using only P arrivals and the MAXI technique. Three synthetic earthquake location experiments are proposed: (1) noise-free and (2) noisy arrivals used in the 3-DVM, and (3) noise-free arrivals used in a 1-DVM. Synthetic results indicate that, under the best conditions (exact arrival data set and 3-DVM), the spatiotemporal configuration of the Ecuadorian network can accurately locate 70 per cent of events in the frontal part of the subduction zone (average azimuthal gap is 289° ± 44°). Noisy P arrivals (up to ± 0.3 s) can accurately located 50 per cent of earthquakes. Processing earthquake location within a 1-DVM almost never allows accurate hypocentre position for offshore earthquakes (15 per cent), which highlights the role of using a 3-DVM in subduction zone. For the application to real data, the seismicity distribution from the 3-D-MAXI catalogue is also compared to the determinations obtained in a 1-D-layered VM. In addition to good-quality location uncertainties, the clustering and the depth distribution confirm the 3-D-MAXI catalogue reliability. The pattern of the seismicity distribution (a 13 yr record during the inter-seismic period of the seismic cycle) is compared to the pattern of rupture zone and asperity of the Mw = 7.9 1942 and the Mw = 7.7 1958 events (the Mw = 8.8 1906 asperity patch is not defined). We observe that the nucleation of 1942, 1958 and 1906 events coincides with areas of positive Simple Bouguer anomalies and areas where marine terraces are still preserved on the coastal morphology. From north to south: (1) the 1958 rupture zone is almost aseismic and is attributed to a zone of high coupling; (2) south of the Galera alignment (perpendicular to the trench), the 1942 rupture zone presents moderate seismicity, deeper on the seismogenic interplate zone, and abutting on the Jama cluster (to the south). This cluster is facing the Cabo Pasado cap and positive Bouguer anomalies on the overriding margin. We suspect that this cluster reflects a zone of local asperity (partial coupling). South of the Jama cluster, the spherical aseismic zone in the Bahia area is interpreted as having a low seismic coupling (steady creep motion or slow slip events). We suspect that the site that generated the three M > 7 events (1896, 1956 and 1998) correspond to a small patch of strong coupling. To the south, in the Manta-Puerto Lopez zone, the seismicity is mainly organized in earthquake swarms (1998, 2002, 2005). Although slow slip events have been observed in the area (Vallée et al. submitted), we infer from the coastline shape, the marine terraces and the high positive Bouguer anomalies that the seismicity here might reveal a significant amount of seismic coupling.
ISSN: 0956-540X

hal-00873478
https://hal.archives-ouvertes.fr/hal-00873478
DOI : 10.1093/gji/ggs083

Éditeur(s) : Gauthier-Villars
Résumé : The Scopoletin-Peroxidase fluorescence decay method has been developed using standard additions and a flow injection manifold for hydrogen peroxide (H2O2) determination in marine waters. The limit of detection of the method was optimized using stored milli-Q water with a minimum of 5 nM (3 sigma). The method was found to be linear from 5 to 700 nM, with an approximate relative standard deviation of 10%. This accuracy was verified on both milli-Q and natural waters running systematically duplicate analysis. The validity and the sensitivity of the technique was studied through the influence of pH, salinity and the dissolved organic matter (DOM) concentration. Standard additions avoided all matrix and experimental interferences, making it possible to use this method under any field conditions and on ''humic-rich'' waters. Additionally, the flow injection manifold improved the accuracy and the runtime of the analytical procedure and simplified the field manipulation.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1995 , Vol. 18 , N. 3 , P. 353-361

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00097/20784/18409.pdf
http://archimer.ifremer.fr/doc/00097/20784/

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
We present an improvement of the maximum intersection (MAXI) method in which absolute earthquake location is defined by the maximum intersection number of hyperbolic equal differential time (EDT) volumes (one EDT volume being described as all grid nodes satisfying the arrival‐time differences between two stations, ± a tolerance value known as TERR). This 3D technique is well adapted to a strongly heterogeneous environment, avoids the depth versus origin‐time trade‐off (even using P arrivals alone), and objectively filters possible erroneous arrival times. Improvements consist of introducing an iterative multiscale approach on the TERR parameter and conducting a hierarchy of grid discretization to refine the preliminary solution (multigrid algorithm). The outlier cleaning process is strengthened by conducting statistical analyses based on the number of EDT volume intersections per station, rather than on travel‐time residues. Processing two series of synthetic arrival times computed in the 3D seismological configuration of the southernmost Ryukyu subduction zone, offshore Taiwan, allows us to (1) confirm MAXI robustness, even when arrival times are highly disturbed or azimuthal coverage largely reduced, and (2) show that MAXI, by limiting trade‐offs between origin time and depth and between epicentral position and depth, is less affected by a wrong velocity model than a technique that minimizes travel‐time residues. To conclude, we apply the MAXI method to locate earthquakes recorded by the combined Central Weather Bureau of Taiwan (CWB) and the Japanese Meteorological Agency (JMA) networks (1991-2008) within a georealistic a priori 3D P‐velocity model. Hypocenter determinations are selected based on MAXI confidence factors, and earthquake clustering along well‐known tectonic features witnesses hypocenter determination accuracy.
ISSN: 0037-1106

hal-00725227
https://hal.archives-ouvertes.fr/hal-00725227
DOI : 10.1785/0120100311

Éditeur(s) : HAL CCSD springer
Résumé : International audience
In this paper, we address the problem of flood prediction in complex situations. We present an original solution in order to achieve the main goals of accuracy, flexibility and readability. We propose the SM2D modular data driven approach that provides predictive models for each sub-process of a global hydrological process. We show that this solution improves the predictive accuracy regarding a global approach. The originality of our proposition is threefold: (1) the predictive model is defined as a set of aggregate variables that act as classifiers, (2) an evolutionary technique is implemented to find best juries of such classifiers and (3) the flood process complexity problem is addressed by searching for sub-models on sub-processes identified partly by spatial criteria. The solution has proved to perform well on flash flood phenomena of tropical areas known to be hardly predictable. It was indeed successfully applied on a real caribbean river dataset after both preprocessing and preliminary analysis steps presented in the paper.
Lecture notes in computer science
Singapour, Singapore

hal-00878780
https://hal.archives-ouvertes.fr/hal-00878780
DOI : 10.1007/978-3-642-40897-7_13

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Sensitive instruments like strainmeters and tiltmeters are necessary for measuring slowly varying low amplitude Earth deformations. Nonetheless, laser and fibre interferometers are particularly suitable for interrogating such instruments due to their extreme precision and accuracy. In this paper, a practical design of a simple pendulum borehole tiltmeter based on laser fibre interferometric displacement sensors is presented. A prototype instrument has been constructed using welded borosilicate with a pendulum length of 0.85 m resulting in a main resonance frequency of 0.6 Hz. By implementing three coplanar extrinsic fibre Fabry-Perot in-terferometric probes and appropriate signal filtering, our instrument provides tilt measurements that are insensitive to parasitic deformations caused by temperature and pressure variations. This prototype has been installed in an underground facility (Rustrel, France) where results show accurate measurements of Earth strains derived from Earth and ocean tides, local hydro-logic effects, as well as local and remote earthquakes. The large dynamic range and the high sensitivity of this tiltmeter render it an invaluable tool for numerous geophysical applications such as transient fault motion, volcanic strain and reservoir monitoring.
ISSN: 0956-540X

hal-01265967
https://hal.archives-ouvertes.fr/hal-01265967
https://hal.archives-ouvertes.fr/hal-01265967/document
https://hal.archives-ouvertes.fr/hal-01265967/file/HCS1.pdf
DOI : 10.1093/gji/ggv358

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : In reservoir engineering, hydrodynamic properties can be estimated from downhole electrical data using heuristic models (e.g., Archie and Kozeny-Carman's equations) relating electrical conductivity to porosity and permeability. Although proven to be predictive for many sandstone reservoirs, the models mostly fail when applied to carbonate reservoirs that generally display extremely complex pore network structures. In this article, we investigate the control of the three-dimensional (3-D) geometry and morphology of the pore network on the electrical and flow properties, comparing core-scale laboratory measurements and 3-D x-ray microtomography image analysis of samples from a Miocene reefal carbonate platform located in Mallorca (Spain). The results show that micrometer- to centimeter-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock, and therefore, existing models might not provide accurate descriptions because these heterogeneities occur at scales smaller than those of the integration volume of the borehole geophysical methods. However, associated with specific data processing, 3-D imagery techniques are a useful and probably unique mean to characterize the rock heterogeneity and, thus, the properties variability.
ISSN: 0149-1423

hal-00950066
https://hal.archives-ouvertes.fr/hal-00950066
DOI : 10.1306/05221312134

Éditeur(s) : HAL CCSD Elsevier
Résumé : Reliable measurements of the intensity of the palaeomagnetic field are notoriously difficult to obtain. The approach generally taken is to produce multiple estimates per rock unit and assume that those which meet certain minimum standards of technical quality will combine to produce an accurate mean. However, here, using results produced from a package of 20th century basaltic lava flows from Mount Etna in Sicily, we demonstrate that this approach can fail. In this case, the application of typical sets of selection criteria actually introduces bias into the mean determination that we measure. We demonstrate that this is caused by two types of non-ideal behaviour acting in combination. The first is a result of the multidomain grains that the samples contain and the second is caused by differences in the natural and laboratory cooling rates. We discuss means of avoiding these sources of error in future palaeointensity studies performed on ancient rocks. We also develop a new, more general reliability criterion which is effective here and which we argue should be applied wherever possible in future palaeointensity studies in conjunction with standard criteria. It requires two distinct types of materials which both produce some good-quality palaeointensity measurements and uses their range of overlap to constrain the true palaeointensity. Both the application of this criterion and general reliability considerations require that future palaeointensity studies should measure many samples per cooling unit and that these should be as diverse in terms of their rock magnetic properties and cooling histories as possible.
ISSN: 0012-821X

hal-00407943
https://hal.archives-ouvertes.fr/hal-00407943
DOI : 10.1016/j.epsl.2007.03.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Terrane accretion and intraplate deformation are both common processes occurring during the assembly of large continental masses. The relative roles of these mechanisms are at the heart of a debate concerning the tectonic evolution of the Borborema Province, northeastern Brazil. In the Central subprovince, four terranes or domains have been proposed. In the Alto Moxotó domain, paragneiss of the Sertânia Complex were considered to record a distinct structural and geochronological evolution compared to those in the adjacent Rio Capibaribe domain, in the East. Here, we report the results of a geological study conducted in the type area of the Sertânia Complex. Kinematic criteria and metamorphic mineral assemblages indicate that the main foliation record top-to-the-W tectonic transport under upper amphibolite facies conditions (650–700 °C). The main foliation was affected by overturned folds and upright to inclined folds; the latter two formed coevally with the development of transcurrent shear zones. Samples of mafic orthogneiss and paragneiss tectonically intercalated in the same outcrop were dated by LA-ICP-MS. The orthogneiss sample yields a crystallization age of 1978 ± 8 Ma. Detrital zircons in the paragneiss sample show a multimodal pattern with a well-defined age peak at c. 700 Ma, showing that the paragneiss is younger than 700 Ma and so the main foliation is also younger than this age. In turn, these findings suggest that the occurrence of exclusively Paleoproterozoic zircons in three other dated samples of paragneiss cannot be used to accurately define the deposition age of the detritus. The structural and geochronological characteristics of the Sertânia Complex are similar to those of the Surubim Complex in the Rio Capibaribe domain. Together with previous results showing that the basement of the Alto Moxotó and Rio Capibaribe domains is also similar, we interpret these sequences as having been deposited on a once contiguous tract of continental crust. An accretionary terrane model is thus not required to account for the tectonic evolution of this portion of the Borborema Province. Instead, a model of intracontinental deformation of a preexistent continent is fully supported by the data and also by the lack of evidence for oceanic subduction.
ISSN: 0301-9268

hal-01622825
https://hal.archives-ouvertes.fr/hal-01622825
DOI : 10.1016/j.precamres.2017.07.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : Analyses of tree diversity and community composition in tropical rain forests are usually based either on general herbarium data or on a restricted number of botanical plots. Despite their high taxonomic accuracy, both types of data are difficult to extrapolate to landscape scales. Meanwhile, forestry surveys provide quantitative occurrence data on large areas, and are thus increasingly used for landscape-scale analyses of tree diversity. However, the reliability of these approaches has been challenged because of the ambiguity of the common (vernacular) names used by foresters and the complexity of tree taxonomy in those hyper-diverse communities.We developed and tested a novel approach to evaluate taxonomic reliability of forestry surveys and to propagate the resulting uncertainty in the estimates of several diversity indicators (alpha and beta entropy, Fisher-alpha and Sørensen similarity). Our approach is based on Monte-Carlo processes that simulate communities by taking into account the expected accuracy and reliability of common names. We tested this method in French Guiana, on 9 one-hectare plots (4279 trees – DBH ⩾ 10 cm) for which both common names and standardized taxonomic determinations were available. We then applied our method of community simulation on large forestry inventories (560 ha) at the landscape scale and compared the diversity indices obtained for 10 sites with those computed from precise botanical determination situated at the same localities.We found that taxonomic reliability of forestry inventories varied from 22% (species level) to 83% (family level) in this Amazonian region. Indices computed directly with raw forestry data resulted in incorrect values, except for Gini–Simpson beta-diversity. On the contrary, our correction method provides more accurate diversity estimates, highly correlated with botanical measurements, for almost all diversity indices at both regional and local scales. We obtained a robust ranking of sites consistent with those shown by botanical inventories.These results show that (i) forestry inventories represent a significant part of taxonomic information, (ii) the relative diversity of regional sites can be successfully ranked using forestry inventory data using our method and (iii) forestry inventories can valuably contribute to the detection of large-scale diversity patterns when biases are well-controlled and corrected.The tools we developed as R-functions are available in supplementary material and can be adapted with local parameters to be used for forest management and conservation issues in other regional contexts
ISSN: 0378-1127

hal-01204219
https://hal.archives-ouvertes.fr/hal-01204219
DOI : 10.1016/j.foreco.2014.05.045
PRODINRA : 286554

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
An intensive water vapour intercomparison effort, involving airborne and ground-based water vapour lidar systems, was carried out in the framework of the COPS experiment. The main objective of this paper is to provide accurate error estimates for these systems. Comparisons between the ground-based Raman lidar BASIL and the airborne CNRS DIAL (Differential Absorption Lidar) indicate a mean relative bias between the two sensors, calculated with respect to the mean value of −2.13% (−0.034 g kg−1) in the altitude region 0.5-3.5 km, while comparisons between BASIL and the airborne DLR DIAL lead to a mean relative bias of 1.87% (0.018 g kg−1) in this same altitude region. Comparisons between the ground-based UHOH DIAL and the CNRS DIAL indicate a bias of −3.2% (−0.37 × 1022 m−3) in the altitude range 1.5-4.5 km, while comparisons between the UHOH DIAL and the DLR DIAL indicate a bias of 0.83% (0.06 × 1022 m−3) in this same altitude range. Based on the available comparisons between the ground-based Raman lidar BERTHA and the CNRS DIAL, the mean relative bias is found to be −4.37% (−0.123 g kg−1) in the altitude region 0.5-4.5 km. Comparisons between the ground-based IGN Raman lidar and the CNRS DIAL indicate a bias of 3.18% (0.55 g kg−1) in the altitude range from 0.5 to 4.5 km, while comparisons between the CNRS DIAL and DLR DIAL result in a mean relative bias of 3.93% (1.1 × 1022 m−3) in the altitude interval 0.5-4.0 km. Based on the available statistics of comparisons, benefiting from the fact that the CNRS DIAL was able to be compared with all other lidar systems, and putting equal weight on the data reliability of each instrument, overall relative values for BASIL, BERTHA, IGN Raman lidar, UHOH DIAL, DLR DIAL, and CNRS DIAL, with respect to the mean value, are found to be −0.38, −2.60, 4.90, −1.43, −2.23 and 1.72%, respectively.
ISSN: 0035-9009

hal-00572576
https://hal.archives-ouvertes.fr/hal-00572576
DOI : 10.1002/qj.697

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : In this paper, we investigate the impact of ambient temperature changes on the gravity reading of spring-based relative gravimeters. Controlled heating experiments using two Scintrex CG5 gravimeters allowed us to determine a linear correlation (R2> 0.9) between ambient temperature and gravity variations. The relation is stable and constant for the two CG5 we used: −5 nm/s2/∘C. A linear relation is also seen between gravity and residual sensor temperature variations (R2> 0.75), but contrary to ambient temperature, this relation is neither constant over time nor similar between the two instruments. The linear correction of ambient temperature on the controlled heating time series reduced the standard deviation at least by a factor of 2, to less than 10 nm/s2. The laboratory results allowed for reprocessing the data gathered on a field survey that originally aimed to characterize local hydrological heterogeneities on a karstic area. The correction of two years of monthly CG5 measurements from ambient temperature variations halved the standard deviation (from 62 to 32 nm/s2) and led us to a better hydrological interpretation. Although the origin of this effect is uncertain, we suggest that an imperfect control of the sensor temperature may be involved, as well as a change of the properties of an electronic component.
ISSN: 0949-7714

hal-01526952
https://hal.archives-ouvertes.fr/hal-01526952
DOI : 10.1007/s00190-016-0961-2

Éditeur(s) : HAL CCSD Society of Exploration Geophysicists
Résumé : low frequency seismic attenuation
International audience
The study of wave attenuation in partially saturated porous rocks over a broad frequency range provides valuable information about the fluid system of reservoirs, which are inherently multiple phase fluid system. Until now, not much laboratory data have been collected in the seismically relevant low frequency range and existing literature data on partially saturated rock are very limited. The main goal of our work is to experimentally measure the bulk seismic attenuation on fluid-bearing rocks, using natural rock samples in an efficient way at in situ conditions. We are currently fine-tuning our attenuation measurement prototype. Preliminary bench-top results are promising and show consistency with reported experimental data with dry, partially and fully fluid saturated rocks. Measurements with the machine are accurate and precise.
ISSN: 1052-3812

hal-00564863
https://hal.archives-ouvertes.fr/hal-00564863
DOI : 10.1190/1.3513397

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
People are exposed to multiple pollutants, especially indoors, in particular through ingestion of indoor settled dust. In the perspective of a cumulative risk assessment, a multi-residue analytical method based on pressurized liquid extraction (PLE) and gas chromatography/tandem mass spectrometry (GC/MS/MS) was developed for the simultaneous analysis in indoor dust of several classes of semi-volatile organic compounds (SVOCs) of health concern, from trace to highly concentrated compounds, including musk fragrances, organochlorines (OCs), organophosphates (OPs), polycyclic aromatic hydrocarbons (PAHs), polybromodiphenylethers (PBDEs), polychlorobiphenyls (PCBs), phthalates and pyrethroids. The method was validated in terms of limits of quantification (LOQ), and accuracy and precision via spiking experiments on an inert material (Celite(®) 545) and replicate analysis of the standard reference material SRM 2585 supplied by the National Institute of Standards and Technology (NIST). Method LOQs for 200 mg samples of sieved dust were 26 ng g(-1) for PCBs and some OCs, 65 ng g(-1) for musks, OPs, PAHs, PBDEs, pyrethroids, other OCs and some phthalates, 132 ng g(-1) for butylbenzylphthalate (BBP), 197 ng g(-1) for tributylphosphate and 1579 ng g(-1) for other phthalates. Quadratic calibration curves were established for each compound by analyzing at least five calibration solutions and exhibited determination coefficients higher than 0.999. The method was successfully applied to the SRM 2585 and seven real indoor dust samples. The results obtained on SRM 2585 demonstrate both excellent reproducibility and agreement with the indicative, reference or certified values and provide, for the first time, indicative concentrations for chlorpyrifos, diazinon, diisononylphthalate (DiNP) and tetramethrin. The results obtained on real dust samples illustrate the ability of the proposed method to quantify a wide range of SVOCs in a single analysis, making it appropriate for environmental monitoring programs or large-scale studies with a large number of samples.
ISSN: 0021-9673

hal-00994493
https://hal-univ-rennes1.archives-ouvertes.fr/hal-00994493
DOI : 10.1016/j.chroma.2014.02.004
PUBMED : 24598454

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The ‘International Intercomparison Exercise of fCO₂ Systems’ was carried out in 1996 during the R/V Meteor Cruise 36/1 from Bermuda/UK to Gran Canaria/Spain. Nine groups from six countries (Australia, Denmark, France, Germany, Japan, USA) participated in this exercise, bringing together 15 participants with seven underway fugacity of carbon dioxide (fCO₂) systems, one discrete fCO₂ system, and two underway pH systems, as well as systems for discrete measurement of total alkalinity and total dissolved inorganic carbon. Here, we compare surface seawater fCO₂ measured synchronously by all participating instruments. A common infrastructure (seawater and calibration gas supply), different quality checks (performance of calibration procedures for CO2, temperature measurements) and a common procedure for calculation of final fCO₂ were provided to reduce the largest possible amount of controllable sources of error. The results show that under such conditions underway measurements of the fCO₂ in surface seawater and overlying air can be made to a high degree of agreement (±1 μatm) with a variety of possible equilibrator and system designs. Also, discrete fCO₂ measurements can be made in good agreement (±3 μatm) with underway fCO₂ data sets. However, even well-designed systems, which are operated without any obvious sign of malfunction, can show significant differences of the order of 10 μatm. Based on our results, no “best choice” for the type of the equilibrator nor specifics on its dimensions and flow rates of seawater and air can be made in regard to the achievable accuracy of the fCO₂ system. Measurements of equilibrator temperature do not seem to be made with the required accuracy resulting in significant errors in fCO₂ results. Calculation of fCO₂ from high-quality total dissolved inorganic carbon (CT) and total alkalinity (AT) measurements does not yield results comparable in accuracy and precision to fCO₂ measurements.
ISSN: 0304-4203

hal-01245605
https://hal.archives-ouvertes.fr/hal-01245605
DOI : 10.1016/S0304-4203(00)00080-3

Éditeur(s) : HAL CCSD
Résumé : SilviLaser 2015, La Grande Motte, FRA, 28-/09/2015 - 30/09/2015
International audience
The study provides technical guidelines to optimize sampling design parameters in the context of the implementation of biomass predictive models from airborne lidar data. Parameters under study were those easily controlled when implementing an area-based approach, i.e. lidar pulse density and both field sampling protocols and measurements. Parameters most impacting the model accuracy were identified by conducting a one-factor- at -a-time and a global sensitivity analyses. Number and size of field plot, and plot center position accuracy were identified to be the parameters most impacting model accuracy.
Proceedings of silviLaser 2015. Durrieu S. et Véga, C. (eds)
La Grande Motte, France

hal-01286833
https://hal.archives-ouvertes.fr/hal-01286833
https://hal.archives-ouvertes.fr/hal-01286833/document
https://hal.archives-ouvertes.fr/hal-01286833/file/mt2015-pub00046522.pdf
IRSTEA : PUB00046522

Éditeur(s) : HAL CCSD E Schweizerbart Science Publishers
Résumé : International audience
Mass balance calculations have been performed through a comparison of published graphical and statistical approaches applied to two contrasted geological settings: (i) the development of a greenschist-facies ductile shear-zone that recorded a weak volume change but significant mass transfers, and (ii) the formation of exoskarns in metacarbonate xenoliths that recorded a large volume decrease related to huge mass transfers. The comparison of the four mass-balance approaches shows that, if uncertainties are ignored, (1) they yield similar results concerning the mobile vs immobile behaviour of many components; (2) they yield similar mass-change values on bulk rock and on individual chemical elements (bulk-rock mass-change values differ by a maximum of ca. 15 % between graphical and statistical treatments of the metacarbonate xenolith evolution). The main difference concerns the uncertainties on mass changes (for bulk rocks and individual elements), which are much larger with the graphical than with the statistical approaches when uncertainties on chemical elements are taken into account, as they should be.The main advantage of the graphical methods is their rapid implementation and the clarity of the diagrams. Their main disadvantages are that uncertainties on each chemical element and bulk compositions are not taken into account and the difficulty in choosing an accurate immobility field to precisely define errors. Graphical methods need to be completed by a statistical treatment that gives absolute mass transfer results. The statistical approaches have the advantage of taking into account the chemical heterogeneities of the compared populations, in conjunction to a precise data treatment. The statistical treatment is an important and necessary step to decipher and to be pertinent in interpreting mobility/immobility of chemical elements, and, thus, in the absolute quantification of mass and volume changes.
ISSN: 0935-1221

hal-01260258
https://hal.archives-ouvertes.fr/hal-01260258
DOI : 10.1127/ejm/2015/0027-2475

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
This study demonstrates that 20-100 GHz range can be used for spatially-accurate focusing of heating inside the skin achieved by varying frequency and exposure beam size, as well as by enforcing air convection. The latter is also used to reduce overheating of skin surface. Heating at different skin depths depending on these parameters is investigated in detail using the hybrid bio-heat equation. In particular, it is shown that decreasing frequency and/or increasing exposure beam size at forced airflow result in elevation of heating of deeper layers of tissue and decrease of skin surface temperature. Changes of water content within 15%, which exceed those due to aging and presence of tumors, only slightly affect heating. Exposure intensity necessary to reach a target temperature significantly increases in different areas of body with elevated blood flow. Dependence on exposure intensity and hyperthermia treatment duration is also investigated and discussed. Results of this study suggest that the lower part of the millimeter-wave range is an attractive alternative for non-invasive thermal treatment of skin cancer with a high spatial resolution. Bioelectromagnetics. 36:464-475, 2015. © 2015 Wiley Periodicals, Inc
ISSN: 0197-8462

hal-01187403
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01187403
DOI : 10.1002/bem.21929
PUBMED : 26179286

Éditeur(s) : Elsevier Sci Ltd
Résumé : A multi-scale global hindcast of ocean waves is presented that covers the years 1994-2012, based on recently published parameterizations for wind sea and swell dissipation [Ardhuin, F., Rogers, E., Babanin, A., Filipot, J.-F., Magne, R., Roland, A., van der Westhuysen, A., Queffeulou, P., Lefevre, J.-M., Aouf, L., Collard, F., 2010. Semi-empirical dissipation source functions for wind-wave models: Part I. Definition, calibration and validation. J. Phys. Oceanogr. 40 (9), 1917-1941]. Results from this hindcast include traditional wave parameters, like the significant wave height and mean periods, and we particularly consider the accuracy of the results for phenomenal sea states, with significant heights above 14 m. Using unbiased winds, there is no evidence of a bias in wave heights even for this very high range. Various spectral moments were also validated, including the surface Stokes drift and mean square slopes that are relevant for wave-current interactions modelling and remote sensing, and also spectra of seismic noise sources. The estimation of these parameters is made more accurate by the new wave growth and dissipation parameterizations. Associated air-sea fluxes of momentum and energy are significantly different from what is obtained with the WAM-Cycle 4 parameterization, with a roughness that is practically a function of wind speed only. That particular output of the model does not appear very realistic and will require future adjustments of the generation and dissipation parameterizations.
Ocean Modelling (1463-5003) (Elsevier Sci Ltd), 2013-10 , Vol. 70 , P. 174-188

Droits : 2012 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00155/26582/25477.pdf
DOI:10.1016/j.ocemod.2012.12.001
http://archimer.ifremer.fr/doc/00155/26582/