Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We are concerned with the three-dimensional magnetostatic problem where the nonhomogeneities and the source are confined to a bounded domain. We derive a mixed formulation of this problem whose unknowns are the magnetic field, a current vector potential which is introduced as an auxiliary unknown, and a boundary unknown which results from the boundary integral method. This formulation is an improvement with respect to previous formulations proposed in the literature in the sense that it leads to an easier implementation using Nédélec's edge elements and boundary elements, and to good numerical accuracy. Some numerical results are described and compared with those obtained by using the classical formulation in a scalar potential.
ISSN: 0168-9274

hal-00730199
https://hal.archives-ouvertes.fr/hal-00730199

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present an integrated study of geochemistry, petrofabrics and seismic properties of strongly sheared eclogites from the Chinese Continental Scientific Drilling (CCSD) project in the Sulu ultrahigh-pressure (UHP) metamorphic terrane, eastern China. First, geochemical data characterize diverse protoliths of the studied eclogites. The positive Eu- and Sr-anomalies, negative Nb anomaly and flat portion of heavy rare earth elements in coarse-grained rutile eclogites (samples B270 and B295) suggest a cumulate origin in the continental crust, whereas the negative Nb anomaly and enrichment of light rare earth elements in retrograde eclogites (samples B504, B15 and B19) imply an origin of continental basalts or island arc basalts. Second, P-wave velocities (V-p) of three typical eclogite samples were measured under confining pressures up to 500 MPa and temperatures to 700 degrees C. At 500 MPa and room temperature, the mean V-p reaches 8.50-8.53 km/s in samples B270 and B295 but drops to 7.86 km/s in sample B504, and the P-wave anisotropy changes from 1.7-2.7% to 5.5%, respectively. The pressure and temperature derivatives of V-p are larger in the retrograde eclogite than in fresh ones. Third, the electron backscatter diffraction (EBSD) measurements of the eclogites reveal random crystal preferred orientation (CPO) of garnet and pronounced CPO of omphacite, which is characterized by a strong concentration of [001]-axes sub-parallel to the lineation and of (010)-poles perpendicular to the foliation. The asymmetric CPO of omphacite in sample B270 recorded a top-to-the-south shear event during subduction of the Yangtze plate. The calculated fastest V-p is generally sub-parallel to the lineation, but a different deformation environment during exhumation could form second-order variations in omphacite CPO and affect the V-p distribution in eclogites (e.g., the fastest V-p is at similar to 35 degrees from the foliation in sample 13295). Comparison between measured and calculated seismic properties indicates that the CPO of omphacite controls the seismic anisotropy of eclogites at high pressure, and compositional layering and retrograde minerals will increase the anisotropy. Calculated P-wave velocities agree well with velocities measured at 500 MPa and room temperature for fresh eclogites, but much higher than those of retrograde eclogite. As a case study, the laboratory-derived V-p-P and V-p-T relationships were used to estimate P-wave velocities of eclogites and peridotites beneath the Western Superior Province, Canada. The results indicate that besides the fabric-induced anisotropy, the direction dependence of pressure and temperature derivatives of V-p can significantly increase seismic anisotropy of eclogites with depth, which results in eclogites being an important candidate for the seismic anisotropy in the upper mantle. Due to their very high density and velocity, garnet-rich eclogites within peridotite could be detected in seismic reflections in subduction zones.
ISSN: 0040-1951

hal-00463512
https://hal.archives-ouvertes.fr/hal-00463512
DOI : 10.1016/j.tecto.2008.09.027

Éditeur(s) : Elsevier
Résumé : The fining upward trend commonly described on levees of turbidite systems can be either attributed to changes in the sediment supply (external forcing = allocyclic) or changes in the spillover processes related to the growth of the levee (internal forcing = autocyclic). However the real causes remain speculative and difficult to demonstrate. Knowledge of vertical change in flow velocity (or grain size) in turbidity currents, of the turbidity current's height, as well as the growth rate of a levee are theoretically sufficient to describe the evolution of the grain size of a leveed turbidite sequence deposited by spillover processes. A piston core (MD99-2344) retrieved on the right levee of the Petit-Rhone neofan, sampled an 8.50 m long turbidite sequence containing more than one hundred turbidite beds and showing a marked fining upward trend. With the help of two profiles describing respectively the vertical velocity [Stacey, M. and Bowen, A.J., 1988b. The vertical structure of turbidity currents and a necessary condition for self-maintenance, Journal of Geophysical Research, pp. 3543-3553.] and the vertical grain size [Migeon, S., 2000. Dunes geantes et levees sedimentaires en domaine marin profond: approche morphologique, sismique et sedimentologique. PhD Thesis, Universite Bordeaux 1, Talence, France, 288 pp.] of a turbidity current, and a simple graphical method, we test several hypotheses on the height of the turbidity current and on the grain size at the bottom of the turbidity current and we attempt to reproduce the vertical fining upward trend. Our results show that the fining upward trend of the turbidite facies can be explained by the aggradation of the turbidite levee and the gradual confinement of the turbidity currents in the channel. This is, therefore, an autocyclical phenomenon. However a high frequency variability of the grain size overprinted on the trend cannot be explained by internal forcing and is believed to be allocyclical, depending on changes to the sediment input. The vertical grain-size profile allows more realistic flow conditions to be determined and shows that the vertical velocity profile does not describe the ability of turbidity current to transport sediment. This simple graphical method allows a better understanding and quantification of the forcing on turbidite deposits and improves description of the characteristics of the turbidity currents from the grain size of the deposits.
Marine Geology (0025-3227) (Elsevier), 2006-12 , Vol. 234 , N. 1-4 , P. 191-213

Droits : 2006 Elsevier
http://archimer.ifremer.fr/doc/2006/publication-2311.pdf
DOI:10.1016/j.margeo.2006.09.019
http://archimer.ifremer.fr/doc/00000/2311/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present the results of a paleomagnetic study of seven new volcanic sections (146 flows) from Kerguelen Archipelago. For two of these sections, preliminary (;40;Ar/;39;Ar) ages are reported to aid in the calibration of the paleomagnetic results. The primary contribution of this report, however, is a compilation of these new data with those already published in order to describe statistically the characteristics of the paleomagnetic field as recorded by the Kerguelen flood basalts. In total, 258 paleomagnetic directions sampled at 13 stratigraphic sections through the lava pile are available and span an approximately 5 Ma window: from 25 to 30 Ma. The composite section represents at least 11 polarity zones that are correlated to the reference geomagnetic polarity timescale. Our approach is to investigate the average normal and reversed polarity field directions over this 5 Ma window. We calculated a paleomagnetic pole found to be located at ;λ; = 85.5°N, = 189.3°E (A;95; = 2.3°, K = 16.5, N = 233). This pole is in close agreement with the coeval paleomagnetic poles obtained from different worldwide places when analyzed in the Indo-Atlantic hot spot reference frame. In the statistical analysis we tackle the specific question: Is the secular variation isotropic? This question is directly related to the occurrence of a longitudinal confinement of the virtual geomagnetic poles, which is still a matter of debate among paleomagnetists. By means of statistical tests we show that the paleomagnetic data from Kerguelen agree with an isotropic model for paleosecular variation. Finally, we present adjustments to Camps and Prévot's (1996) statistical model, developed for some Northern Hemisphere latitudes, to the Southern Hemisphere paleomagnetic data from Kerguelen.
ISSN: 0148-0227

hal-00407636
https://hal.archives-ouvertes.fr/hal-00407636
https://hal.archives-ouvertes.fr/hal-00407636/document
https://hal.archives-ouvertes.fr/hal-00407636/file/pcamps-JGR2007.pdf
DOI : 10.1029/2006JB004648

Éditeur(s) : Actes de colloques Ifremer, Tahiti, French Polynesia, 20 Feb - 4 Mar 1989, n°9, chap. 48, pp.511-516
Résumé : Hoplosternum littorale is a siluriform fish of very high commercial value in some countries of South America. Some biological characteristics as easy spawning in confinement and good tolerance of low oxygen level make it easy to cultivate.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1989/acte-1491.pdf
http://archimer.ifremer.fr/doc/00000/1491/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The brown algal genus Padina (Dictyotales, Phaeophyceae) is distributed worldwide in tropical and temperate seas. Global species diversity and distribution ranges, however, remain largely unknown. Species-level diversity was reassessed using DNA-based, algorithmic species delineation techniques based on cox3 and rbcL sequence data from 221 specimens collected worldwide. This resulted in estimates ranging from 39 to 61 putative species (ESUs), depending on the technique as well as the locus. We discuss the merits, potential pitfalls, and evolutionary and biogeographic significance of algorithmic species delineation. We unveil patterns whereby ESUs are in all but one case restricted to either the Atlantic or Indo-Pacific Ocean. Within ocean basins we find evidence for the vast majority of ESUs to be confined to a single marine realm. Exceptions, whereby ESUs span up to three realms, are located in the Indo-Pacific Ocean. Patterns of range-restricted species likely arise by repeated founder events and subsequent peripatric speciation, hypothesized to dominate speciation mechanisms for coastal marine organisms in the Indo-Pacific. Using a three-gene (cox3, psaA and rbcL), relaxed molecular clock phylogenetic analysis we estimated divergence times, providing a historical framework to interpret biogeographic patterns.
ISSN: 0022-3646

hal-01545323
https://hal.archives-ouvertes.fr/hal-01545323
DOI : 10.1111/jpy.12027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We conducted triaxial compression experiments to investigate the effects of pressure, temperature and strain rate on the rheology of talc rocks. The tests were carried out at T from 25 to 860 degrees C, P from 0.1 to 300 MPa, and <(epsilon) over dot> from 0.3 to 30 x 10-5 s(-1). In addition to being very weak, there are other important differences between the mechanical behavior of talc and that of most other silicates. Deformation at all temperatures up to dehydration was accommodated by a combination of crystal plasticity, frictional sliding, and cataclasis. A transition from localized to distributed deformation occurred at P = 300 MPa and T = 400 degrees C, but this transition is ill-defined as both distributed and localized deformation were observed at P = 300 MPa and T = 600 degrees C. Unlike most silicates, both the coefficient of internal friction and the coefficient of (sliding) friction are very low and nearly equal to each other. Temperature enhances plastic deformation (kinking), and inter- and intra-granular microcracks are observed parallel to the (001) planes at all conditions. Voids are created by delamination along (001) planes at kink-band boundaries. Full crystal plasticity was not achieved under any of the conditions tested, i.e., the von Mises criterion was never satisfied. However, the strength of the aggregates remained much less than the confining pressure. These unusual properties are likely a manifestation of the pronounced mechanical anisotropy of talc at the grain scale. At T >= 750 degrees C dehydration is observed, but only along shear zones. These results suggest that feedbacks between deformation and reaction kinetics could control fluid flow in fault zones. The presence of talc can promote significant weakening and strain localization in the oceanic lithosphere, the subducting plate and the overlying mantle wedge. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00492706
https://hal.archives-ouvertes.fr/hal-00492706
DOI : 10.1016/j.epsl.2008.02.004

Éditeur(s) : Gauthier-Villars
Résumé : Cyprideis torosa (Crustacea, Ostracoda), which is well known for its ability to live in a wide range of salinity and for the variability of its ornamentation, was sampled in the paralic environment. in the Camargue (France) and in the area of Santa-Pola (south-east Spain), in ambient waters whose salinity varies from 1 to 120 g/l. The collected valves. which are smooth, punctuated, reticulated or have nodes on their surface, were analyzed by means of spark-source mass spectrometry. We detected twenty-six chemical elements, and found a clear relationship between the chemical composition, the ornamentation of the valves and the environmental parameters. In the oligohaline environment, the carapaces are thick, reticulated or node-bearing ; they are enriched in Si, Al, Fe, Mn and Ba which are terrigenous elements introduced by fresh water. In an open hypersaline environment, the carapaces are reticulated or punctuated ; they are chemically characterized by P, Sr and Li, typical for concentrated seawater. Finally, in a closed hypersaline environment. the collected individuals are smooth, and their carapaces are very thin ; their content S is related to the abundant organic matter provided by the development of algal and cyanobacterial mats. Salinity and confinement, which are the main parameters characteristic of the studied ecosystems, are also the two factors that control the ornamentation of the valves. The chemical analysis and the field observations reveal that the granulometric characteristics of the microhabitats must be considered because they control the exchanges at the water-sediment interface. The anthropic influences on the chemical composition of the carapace must be emphasized: it is possible to detect industrial and domestic wastes. But the ornamentation of the carapace is not related to these pollutants - chiefly heavy metals (Pb, Ni Sn) - and depends mainly on the open or closed character of the ambient environment. The present method highlights, on the basis of the chemical composition, a relationship between ornamentation and environmental parameters. It is particularly efficient in the interpretation of the morphology of the valves in relation to the palaeoenvironment.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1991 , Vol. 14 , N. 5 , P. 505-514

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00103/21378/18978.pdf
http://archimer.ifremer.fr/doc/00103/21378/

Éditeur(s) : HAL CCSD Elsevier
Résumé : Nominally anhydrous minerals (NAMs) of Earth's mantle can contain hydrogen as atomic impurity in their crystal structures. This hydrogen substantially modifies many physical properties of Earth's mantle rocks. Also, the Earth's deep interior is made of rocks where minerals are separated by nanometer-scale interfaces call grain boundaries and interphase boundaries. These grain boundaries should carefully be considered as a potential hydrogen reservoir as well. I report here an experimental investigation of hydrogen diffusion through grain boundaries in olivine polycrystalline aggregates. Hot-press and diffusion experiments were performed using a gas-medium high-pressure vessel at a confining pressure of 300 MPa, over a temperature range of 1000-1200 degrees C. The diffusion assembly consisted of a dense polycrystalline cylinder of natural olivine from San Carlos (Arizona) mixed with olivine singles crystals of millimeter size. This mixture was couple with a talc cylinder. Ni capsule were used to buffer the oxygen fugacity at Ni-NiO level. Experiment durations varied from 3 min to 4 h. The presence of hydrogen in the sample was quantified using Fourier transform infrared spectroscopy. The calculation of the diffusion coefficients was based on the estimation of the length of polycrystalline solid affected by the diffusion of hydrogen. The absence or presence of hydrogen was recorded by the large olivines behaving here as "hydrogen sensor", which are implanted in the aggregate. The results indicate that effective hydrogen diffusivity which includes grain boundaries effect in olivine aggregate is barely one order of magnitude faster than hydrogen diffusion in an olivine single crystal with a diffusivity similar to 8.5x 10(-10) m(2) s(-1) 1000 degrees C and only twice faster similar to 2.1 x10(-9) m(2) s(-1) 1200 degrees C. Calculations of the diffusion data in relation to the Arrhenius Law, yield an activation energy of similar to 70 +/- 10 kJ mol(-l) . From these effective diffusivities and combined with published diffusion data for olivine single crystals, hydrogen diffusion in grain boundaries is extracted and yield diffusivities almost three order of magnitude faster (similar to 5 x 10(-6) m(2) s(-1) at 1200 degrees C) than in an olivine single crystal at the equivalent high temperature. On geological scales and for coarse-grain rocks, hydrogen diffusivity in grain boundaries is not fast enough to compete with lattice diffusion. The relative large grain size of mantle rocks will ensure a very limited hydrogen transport by effective diffusion, and a good conservation of water-rich zones in the Earth's mantle.
ISSN: 0012-821X

hal-00512821
https://hal.archives-ouvertes.fr/hal-00512821
DOI : 10.1016/j.epsl.2010.04.019

Éditeur(s) : HAL CCSD
Résumé : The Tyrrhenian Sea is usually interpreted to be a Neogene back-arc basin that opened by continental rifting and oceanic spreading caused by the eastward migration of the Apennine subduction system from Tortonian to Pliocene times. Rifting of the Tyrrhenian Sea started first along the Eastern Sardinian margin during the Tortonian-Messinian times. The " METYSS " project aims at better constraining the relations between crustal tectonics, salt tectonics and sedimentation from Messinian times to present-day. The " METYSS 1 " cruise (2009, R/V "Téthys II"-INSU) allowed us to obtain about 1200 km of high-resolution seismic reflection profiles along the SE Corsican margin, and along the upper and middle parts of the Eastern Sardinian margin, Western Tyrrhenian. This new dataset clearly illustrates that this area has been highly dissected during the rifting stage by N-S trending normal faults delineating ridges and basins, as previously described. The Messinian seismic markers (UU and MU) locally display fan-shaped stratal geometries, but the mechanism responsible for such geometries, i.e., salt tectonics or rifting, has yet to be carefully deciphered. We also mapped the spatial distribution of the mobile salt (MU). The highly variable thickness of the confined salt basins may be related to the initial pre-Messinian basin geometry or to the fact that sediment deposition was syn-rift. Southeastward, salt tectonics appears highly vigorous. More surprisingly, our data demonstrate that some of the major faults have been significantly reactivated during the post-rift period, up to late Quaternary time. Such recent fault activity has been recorded by bathymetric scarps and associated footwall debris flows. Moreover, some of this post-rift deformation can be evidenced within the Plio-Quaternary sequence by a regional unconformity. The post-Miocene deformation style varies greatly between different areas of the margin, and can also be strongly influenced by the presence or absence of mobile Messinian evaporites (MU).
13ème Congrès Français de Sédimentologie
Dijon, France

hal-00657310
https://hal-brgm.archives-ouvertes.fr/hal-00657310

Éditeur(s) : Elsevier Science Bv
Résumé : The Danube River Basin–Black Sea area represents a unique natural laboratory for studying the interplay between lithosphere and surface as well as source to sink relationships and their impact on global change. This paper addresses some information on the “active sink” of the system; i.e. the Danube deep sea fan and the Black Sea basin. The present study focuses on the distal sedimentary processes and the evolution of sedimentation since the Last Glacial Maximum. This is investigated through recently acquired long piston coring and shallow seismic data recovered at the boundary of influence of the distal part of the Danube turbidite system (to the north-west) and the Turkish margin (to the south). This dataset provides a good record of the recent changes in the sedimentary supply and climato-eustasy in the Black Sea region during the last 25 ka. This study demonstrates that the deep basin deposits bear the record of the Late Quaternary paleoenvironmental changes and that the western Black Sea constitutes an asymmetric subsident basin bordered by a northern passive margin with confined, mid-size, mud-rich turbidite systems mainly controlled by sea-level, and a southern turbidite ramp margin, tectonically active. Highlights ► Oceanographic results from survey carried out in the western Black Sea are presented. ► The Danube fan distal part: the Black Sea main depositional feature is described. ► This study is on the morphology and gravity sedimentation in the Black Sea deep basin. ► Data were collected at the boundary between the Danube fan and the Turkish margin. ► The dataset provide a good record of sedimentary supply and climato-eustatic changes.
Global And Planetary Change (0921-8181) (Elsevier Science Bv), 2013-04 , Vol. 103 , P. 232-247

Droits : 2012 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00095/20637/18272.pdf
DOI:10.1016/j.gloplacha.2012.05.002
http://archimer.ifremer.fr/doc/00095/20637/

Résumé : Sea fish farms with production of more than 20 tons per year in France must obtain two operating licences: (i) one for Sea Farming (AECM), with the aim of ensuring that the granted site and use of the maritime public domain for exploitation will respect all restrictions of general interest; (ii) one for regulating Facilities Classified for the Protection of the Environment (ICPE). Although the first one requires a relatively simple licence request file, the second one demands a very complete file, which includes, beyond the notice of exploitation information, a complete impact study, as well as a hazards study and a health and safety notice. In this context, petitioners in Corsica (adjustment of status or new exploitation) are faced with the same difficulties, which highlighted the need for a methodological guide adapted to each region's specific situation, assembling in particular the necessary baseline data (legal, zootechnical, geographical, climatic, socio-economic, ecological...) as well as recognised methods for evaluating the potential effects of the farm on the environment. Development of this guide was supported by ADEC and supervised by a steering committee composed of representatives from the administrations concerned, fish farmers and scientific bodies. The significant aspects dealt with the effects of fish farming on Posidonie herbarium, a protected species very present in Corsica and with coordinating the two AECM and ICPE procedures. For each part of the ICPE file, the guide introduces the technical or scientific context and, depending upon the case, the state of the art, sources of available data, acquisition and methods of acquiring measurements and of assessing the potential effects, as well as practical editing recommendations. Finally, the guide is made complete by a model schedule of conditions designed to help petitioners to have a specialist research department incorporate all or part of the file. This guide primarily concerns first-time marine facilities for exploitation in Corsica, conceived of as in the open sea rather than in confined spaces. Nonetheless, any fish farmer or future fish farmer needing to process a request for an exploitation licence may find it useful.
Les piscicultures marines de plus de 20 t/an de production sont soumises en France à l'obtention de deux autorisations d'exploiter : (i) celle au titre des Cultures Marines (AECM), visant à s'assurer que le site concédé et l'usage du domaine public maritime pour l'exploitation permettent de respecter l'ensemble des contraintes d'intérêt général ; (ii) celle au titre de la réglementation des Installations Classées pour la Protection de l'Environnement (ICPE). Si la première nécessite un dossier de demande d'autorisation relativement simple, la seconde requiert un dossier très complet, qui comprend, outre une notice de renseignements sur l'exploitation, une étude d'impact complète, ainsi qu'une étude des dangers et une notice d'hygiène et de sécurité. Dans ce contexte, les demandeurs en Corse (régularisation ou exploitation nouvelle) sont confrontés aux mêmes difficultés, ce qui a mis en évidence le besoin d'un guide méthodologique adapté aux spécificités régionales, rassemblant en particulier les données de base nécessaires (juridiques, zootechniques, géographiques, climatiques, socio-économiques, écologiques...) ainsi que les méthodes reconnues de l'évaluation des effets potentiels de la ferme sur l'environnement. L'élaboration de ce guide a été soutenue par l'ADEC et suivie par un comité de pilotage composé de représentants des administrations concernées, des pisciculteurs et d'organismes scientifiques. Les aspects importants ont porté sur les effets de la pisciculture sur l'herbier de Posidonie, espèce protégée très présente en Corse et sur la coordination entre les deux procédures AECM et ICPE. Pour chaque partie du dossier ICPE, le guide présente le contexte technique ou scientifique et selon le cas, l'état de l'art, les sources de données disponibles, les méthodes d'acquisition des mesures et d'évaluation des effets potentiels, ainsi que des recommandations pratiques de rédaction. Enfin, le guide est complété par un cahier des charges type destiné à aider les demandeurs à confier à un bureau d'étude spécialisé la réalisation de tout ou partie de la constitution du dossier. Ce guide concerne prioritairement les installations marines de nouvelles exploitations en Corse, envisagées en mer ouverte plutôt que dans des espaces confinés. Néanmoins tout pisciculteur ou futur pisciculteur devant instruire une demande d'autorisation d'exploiter peut y trouver intérêt.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2004/rapport-2188.pdf
http://archimer.ifremer.fr/doc/00000/2188/

Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500 m thick highly strained metamorphic rock units found beneath myloniticbanded peridotites at the base of large-scale ophiolites, as exemplified in Oman. Metamorphic soles aremainly composed of metabasalts deriving from the downgoing oceanic lithosphere and metamorphosed up togranulite-facies conditions by heat transfer from the mantle wedge. Pressure–temperature peak conditions areusually estimated at 1.00.2 GPa and 800100ºC. The absence of HP–LT metamorphism overprint implies thatmetamorphic soles have been formed and exhumed during subduction infancy. In this view, metamorphic soleswere strongly deformed during their accretion to the mantle wedge (corresponding, now, to the base of the ophiolite).Therefore, metamorphic soles and banded peridotites are direct witnesses of the dynamics of early subductionzones, in terms of thermal structure, fluid migration and rheology evolution across the nascent slab interface.Based on fieldwork and EBSD analyses, we present a detailed (micro–) structural study performed on samplescoming from the Sumeini window, the better-preserved cross-section of the metamorphic sole of Oman. Largedifferences are found in the deformation (CPO, grain size, aspect ratio) of clinopyroxene, amphibole and plagioclase,related to mineralogical changes linked with the distance to the peridotite contact (e.g., hardening due to theappearance of garnet and clinopyroxene).To model the incipient slab interface in laboratory, we carried out 5 hydrostatic annealing and simple-shear experimentson Griggs solid-medium apparatus. Deformation experiments were conducted at axial strain rates of 10-6s-1. Fine-grained amphibolite was synthetized by adding 1 wt.% water to a (Mid-Ocean Ridge) basalt powder asa proxy for the metamorphic sole (amphibole + plagioclase + clinopyroxene garnet assemblage). To synthetizegarnet, 2 experiments were carried out in hydrostatic conditions and with deformation at 800C with confiningpressure of 2 GPa. Another simple-shear experiment has been carried out at 800C and 1 GPa with fined-grainednatural garnet. With the aim of mimicking the early slab interface (between the metamorphic sole and bandedperidotites at the base of the ophiolite), 2 simple-shear deformation experiments with 2 layers have been carriedout at 800C and confining pressure of 1 GPa. The bottom layer was made of hydrated basalt powder and the toplayer was made of olivine.Fined-grained garnet-free amphibolite is significantly weaker than dunite but the appearance of harder mineralsin the amphibolite (garnet and clinopyroxene) has major implications on its rheological evolution. These resultsallow liking field observations of strain localization at the interface to the metamorphic sole formation
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01309394
https://hal-insu.archives-ouvertes.fr/insu-01309394

Éditeur(s) : Society for Sedimentary Geology
Résumé : The Kramis deep-sea fan extends over 45 km at the base of the western Algerian continental slope between 2000 and 2550 m water depth and covers an area of approximately 1200 km2. The Kramis Fan was initiated after Messinian time, evolved during the Plio-Quaternary, and, is still active, as proved by submarine cable breaks during the 1954 Orléansville earthquake. The Kramis Fan is fed by two perpendicular canyons: the Kramis Canyon and the Khadra Canyon, merging in a single E–W-oriented channel confined at the foot of the slope. It is strongly asymmetric with a super-developed levee on the right-hand side of the channel, the Kramis Ridge. Based on recent multibeam, side-scan sonar, and sediment core data (Maradja, 2003 and 2005, Prisma, 2004, and Prisme, 2007 cruises), we describe the morphology and internal structure of the fan and particularly the sediment ridge, showing marked lateral changes in the sediment-wave morphology and their association with a series of large scours in the intermediate part of the ridge aligned in the continuity of the Khadra Canyon direction. Overall, the Kramis Ridge is formed by turbidity currents overspilling the ridge crest, which is 100 m above the channel floor, with two exceptions. In the distal part of the ridge the subdued ridge-crest height probably causes continuous overspill, testified by sediment waves migrating parallel to the channel. The scours occur in the intermediate part of the ridge where the ridge height is only 50–60 m; scours are interpreted as the result of cyclic steps due to flow stripping of currents provided by the intersection of the Khadra Canyon with the Kramis Canyon and Channel system. The scours probably postdate the main growth of the Kramis Ridge and induce the local erosion of the ridge, which could correspond to a new channel initiation cutting the ridge. The superposition or the interaction of flows with different directions is responsible of the amplification of the size of the sediment waves with erosional downside flanks and their transformation in scours. The Kramis Fan provides a clear example of flow interaction to explain the presence of large sediment waves and scours on modern submarine fans.
SEPM Special Publication (1060-071X) (Society for Sedimentary Geology), 2012 , Vol. 99 , P. 293-308

Droits : 2012 SEPM (Society for Sedimentary Geology)
http://archimer.ifremer.fr/doc/00129/24021/21978.pdf
http://archimer.ifremer.fr/doc/00129/24021/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Giant Gjallar Vent (GGV), located in the Vøring Basin off mid-Norway, is one of the largest (~ 5 × 3 km) vent systems in the North Atlantic. The vent represents a reactivated former hydrothermal system that formed at about 56 Ma. It is fed by two pipes of 440 m and 480 m diameter that extend from the Lower Eocene section up to the Base Pleistocene Unconformity (BPU). Previous studies based on 3D seismic data differ in their interpretations of the present activity of the GGV, describing the system as buried and as reactivated in the Upper Pliocene. We present a new interpretation of the GGV's reactivation, using high-resolution 2D seismic and Parasound data. Despite the absence of geochemical and hydroacoustic indications for fluid escape into the water column, the GGV appears to be active because of various seismic anomalies which we interpret to indicate the presence of free gas in the subsurface. The anomalies are confined to the Kai Formation beneath the BPU and the overlying Naust Formation, which are interpreted to act as a seal to upward fluid migration. The seal is breached by focused fluid migration at one location where an up to 100 m wide chimney-like anomaly extends from the BPU up to the seafloor. We propose that further overpressure build-up in response to sediment loading and continued gas ascent beneath the BPU will eventually lead to large-scale seal bypass, starting a new phase of venting at the GGV.
ISSN: 0025-3227

hal-01054142
https://hal.archives-ouvertes.fr/hal-01054142
DOI : 10.1016/j.margeo.2014.03.006

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Electrical resistivity soundings are used by geophysicists to determine the structure and composition of the Earth's crust and mantle and to explore natural resources (ore, oil, gas, water). Their interpretations in terms of composition and in-situ physical conditions depend mainly on laboratory measurements of electrical conductivity of rocks at simulated crustal conditions of temperature, pressure, saturation and pore pressures. These measurements present a numbers of limitations, in particular, in the case where conductive pore fluids are present, as in the case of deep reservoir conditions, where temperature exceeds 250 A degrees C. Here, we present a new cell capable of measuring electrical conductivity of large saturated samples at confining pressure up to 200 MPa, pore pressure up to 50 MPa, and temperature up to 500 A degrees C. The measurement cell has been developed in a commercial, internally heated, gas pressure apparatus (Paterson press). It is based on the concept of "guard ring" electrode, which is adapted to samples that are jacketed by a very conductive, metallic material. Numerical modeling of the current flow in the electrical cell allowed defining the optimal cell geometry. Calibration tests have been performed on Fontainebleau sandstones saturated with electrolytes of different conductivities, up to 350 A degrees C. The resulting electrical formation factor and temperature dependence of electrical conductivity are in very good agreement with previous studies. This new cell will improve the exploration and exploitation of deep fluid reservoirs, as in unconventional, high enthalpy geothermal fields. In particular, the investigations address possible effects of fluid-rock interactions on electrical resistivity of a reservoir host rock.
ISSN: 0169-3913

hal-00681997
https://hal.archives-ouvertes.fr/hal-00681997
DOI : 10.1007/s11242-011-9846-2

Éditeur(s) : HAL CCSD Taylor & Francis: STM, Behavioural Science and Public Health Titles
Résumé : International audience
The dislocation microstructures in a single crystal of olivine deformed experimentally in uniaxial compression at 1090 °C and under a confining pressure of 300 MPa, have been investigated by transmission electron tomography in order to better understand deformation mechanisms at the microscale relevant for lithospheric mantle deformations. Investigation by electron tomography reveals microstructures, which are more complex than previously described, composed of and dislocations commonly exhibiting 3D configurations. Numerous mechanisms such as climb, cross-slip, double cross-slip as well as interactions like junction formations and collinear annihilations are the source of this complexity. The diversity observed advocates for microscale deformation of olivine significantly less simple than classic dislocation creep reported in metals or ice close to melting temperature. Deciphering mechanism of hardening in olivine at temperatures where ionic diffusion is slow and is then expected to play very little role is crucial to better understand and thus model deformation at larger scale and at temperatures (900–1100 °C) highly relevant for the lithospheric mantle.
ISSN: 1478-6443

hal-01667146
https://hal.archives-ouvertes.fr/hal-01667146
DOI : 10.1080/14786435.2017.1367858

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : International audience
High-resolution borehole strainmeters are usually installed in tectonically active regions in order to detect slow-slip events, and to estimate slow transients related to earthquake swarms. However, they are also sensitive to other numerous influences, internal or external. Furthermore, the quality of their coupling to the rock through cementation, and the mechanical properties of the rock mass around them, have a critical influence on their records. Many of the existing strainmeters present such problems, and the correction for these effects often remains a challenge. In this paper, we present the analysis of the records of a high-resolution borehole dilatometer (Sacks–Evertson), located in the seismically active rift of Corinth (Greece) (station TRZ in the Trizonia island). We show that the instrument suffers from an only partial-solid coupling, and that the nearby sea tides have a direct (through elastic response) and indirect (through pore-pressure diffusion) effect on the dilatation signal, which adds up to the solid tidal strain source. We propose a methodology that allows, in a first step, to better separate the internal (solid tide) from the external (air pressure, sea level) influences, by calculating a frequency-dependent transfer function outside the range of the tidal periods. We then extrapolate this function, in particular at the tidal periods. In a second step, the resulting variation with frequency of the coupling coefficients with sea level led us to estimate the proportion of instrument not solidly cemented to rock (thus in contact with water pore pressure), which is about 90 % of the total height. Despite the small proportion of solid coupling, the sensor resolution remains very good up to a few tens of hours of a time period, thanks to the confining effects of the rocks on the local pore pressure. These results allow us to correct for the external effects, and reduce the associated variance by 80–90 % (in the period range of minutes to days). The empirical correction of the sea level effect could be explained using a simple Boussinesq’s approximation and 1D pore-pressure diffusion model, which contributed to better constraint of some of the poro-elastic parameters in the vicinity of the instrument. After correction, the solid tidal signal at the 24-h period is almost anti-correlated with those of the theoretical solid tide. This surprising result is consistent with a similar anti-correlation observed for the longest period surface waves (200 s) comparing the TRZ dilatometer signals to the strain measured by a nearby borehole strainmeter (MOK, 15 km). This could be related to the presence of a shallow fault close to the instrument, which would creep in response to seismic wave-related stress.
ISSN: 0033-4533

hal-01122853
https://hal.archives-ouvertes.fr/hal-01122853
DOI : 10.1007/s00024-013-0742-2

Éditeur(s) : HAL CCSD
Résumé : Manque : organisateur de la manifestation - éléments/proceedings
With the new data on bathymetry, currentology, in this ecosystem and the abiotic variables studied from February to May 2007, a review of the Manche-à-Eau’s biological zonation recently stated from the fishassemblage is proposed. The water volume turnover at each tide (14,8%) twice a day combined with an active and various hydrodynamism contribute to vivify the lagoon andprovide information for a better interpretation of the Well-Being Index values and the populational parameters gradients of the fish assemblage. During the studied period, no gradient is observed with the abiotic variables. The water characteristics are homogene-ous verywhere in the lagoon, in the water column and whatever the period studied (temperature: 30,02°C; salinity: 36,16 ‰; pH:8,29; turbidity: 6,10 mg/L; conductivity: 5,51S/m; dissolved oxygen: 7,18mg/L; dissolved solids: 32,78g/Ll; osmolarity:1021,7milliosmoles). A revised biological zonation of the Manche-à-Eau lagoon is pro-posed. According to the quality observed, it is made of three zones, instead four, from II to IV: the zone II is more spread at South and narrow along the island, the zone III occupies the geater part of the ecosystem and the zone IV centered on the two main depressions at South and West, on the shallows and its North-West border and the end of the sector enclaved at South-West.
Con los nuevos datos sobre batimetría y la corrientología en este ecosistema y las variables abióticas estudiadas de febrero a mayo del 2007, se propone una revisión de la zonación biológica recientemente establecida en cuanto a la agrupación de peces del Manche-à-Eau. El volumen de agua renovada dos veces al día en cada marea (14.8%) combinado a un hidrodinamismo activo y variado contribuyen a verificar la laguna, y aportan elementos para una mejor interpretación de los valores de los índices de buen estado y de los diferentes parámetros poblacionales de la ictiofáuna presente. Durante el período estudiado no se observó ningúngradiente con los parámetros abióticos. Las características del agua son homogéneas a lo largo de toda la laguna. En la columna de agua en cualquiera de los períodos considerados (temperatura: 30,02°C; salinidad: 36,16 ‰; pH: 8,29; turbidez: 6,10 mg/L;conductividad: 5,51 S/m; oxígeno disuelto: 7,18 mg/L; sólidos disueltos: 32,78g/L; osmolaridad: 1021,7miliosmoles). Se propone una zonación biológica rectificada. De acuerdo a la calidad observada, esta, está compuesta por tres zonas en lugar de cuatro: de II a IV, la zona II está mas dispersa al sur y es mas estrecha a lo largo de la isla, la zona III domina la mayor parte del ecosistema y lazona IV está centrada en las dos principales depresiones al sur y al oeste, las zonas someras y en su borde al noroeste al igual que del sector enclavado al suroeste.
Avec les nouvelles données sur la bathymétrie et la courantologie de cet écosystème et les paramètres physicochimiques étudiés entre février et mai 2007, c’est une actualisation de la zonation biologique établie récemment à partir de l’assemblage de poissons y séjournant qui est proposée dans cette étude. En effet, le volume d’eau renouvelé deux fois par jour à chaque marée (14,8%) combiné à un hydrodynamisme actif et varié contribuent à vivifier la lagune, et apportent des éléments pour une meilleure interprétation des valeurs des indices de bien-être et des gradients des paramètres populationnels de l’ichtyofaune présente. Durant la période étudiée, aucun gradient n’est observé avec les paramètres abiotiques. La caractéristique des eaux est homogène partout dans la lagune, sa colonne d’eau et aux différentes périodes considérées (température : 30,02°C ; salinité : 36,16 ‰ ; pH : 8,29 ; turbidité : 6,10 mg/L ; conductivité : 5,51 S/m ; oxygène dissous : 7,18 mg/L ; solides dissous : 32,78g/L ; osmolarité : 1021,7milliosmoles). Une zonation biologique rectifiée est proposée. Plus conforme à la qualité observée, elle est composée de trois zones, au lieu de quatre, allant de II à IV: la zone II un peu plus étendue au Sud et plus étroite le long de l’île, une zone III dominante sur l’ensemble de la lagune, et une zone IV centrée sur les deux principales dépressions au Sud et à l’Ouest, le haut-fond et sa bordure au Nord-Ouest ainsi que le fond du secteur enclavé au Sud-Ouest.
Proceedings of the 61st Gulf and Caribbean Fisheries Institute
Le Gosier, Guadeloupe, France

hal-01600920
https://hal.archives-ouvertes.fr/hal-01600920
PRODINRA : 384820

Éditeur(s) : HAL CCSD Institute of Oceanography and Fisheries, Split
Résumé : International audience
This study deals with temporal variations in eel Anguilla anguilla diet, sampled seasonally in the Languedocian Mauguio lagoon (Gulf of Lion), from Autumn 1998 to Summer 1999. Eel mainly feeds on benthic organisms, primarily small Amphipoda, Crustacea (mainly Gammarus gr. locusta), Polychaeta, insect larvae (Chironomidae) and small fish. Based on variations in the eels feeding regime, seasonal influence is illustrated by decreased feeding activity in summer, which progressively increases during the following seasons. The trophic quality available to eels in the Mauguio lagoon depends more on allochtonous inputs from the catchment area than on its own hydrodynamics on which water of marine origin has little influence due to its long distance from the sea. Variations observed during the four seasons illustrate the opportunist type feeding behaviour of eels. They consume the most available benthic preys at a given moment without using a particular feeding strategy like specialisation or generalisation. Eel adapts its diet according to the available resources offered by the ecosystem. Because of this eel, as an amphihaline migrant species, can be characterised as an obvious indirect bioindicator of the trophic capacity and very marked level of confinement in the brackish lagoon ecosystem of Mauguio.
ISSN: 0001-5113

hal-00750416
https://hal.univ-antilles.fr/hal-00750416
https://hal.univ-antilles.fr/hal-00750416/document
https://hal.univ-antilles.fr/hal-00750416/file/Acta_Adriatica_2009_50_2_.pdf