Éditeur(s) : HAL CCSD
Résumé : We present an experimental study of relations between hydraulic properties of clayey rocks and their deformation at bulk and micro scale. The experimentation is based on triaxial deformation of kaolinitic core samples, on permeability measurements, and on several methods of analysis of the microstructure. To produce the samples, remoulded kaolinite material is consolidated by axial loading up to 20 MPa in an oedometric cell. Then, in a triaxial cell, an undrained stress path is applied in order to induce shearing damage in the sample. The permeability of the sample is measured by fluid flow across the sample. Before and after these hydro-mechanical tests, the evolution and the homogeneity of the pore space and moreover the texture of the material are analysed by X-ray tomography, environmental scanning electron microscopy and thermic neutron diffraction. Contrary to expectations, the permeability at the sample scale does not vary significantly, although quite large deformation is reached. The final deformation is heterogeneous, with well-developed shear bands. It appears that the development of compacting and dilating zones generates a heterogeneous permeability field, which results in a negligible variation of the bulk permeability at the sample scale.
International Journal of Rock Mechanics and Mining Science

hal-00496407
https://hal.archives-ouvertes.fr/hal-00496407
DOI : 10.1016/j.ijrmms.2010.04.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Wallace (1951) and Bott (1959) were the first to introduce the idea that the slip on each fault surface has the same direction and sense as the maximum shear stress resolved on that surface. However, this simplified hypothesis is questionable since fault mechanical interactions may induce slip reorientations. Earlier numerical geomechanical models confirmed that the slickenlines (slip vectors) are not necessarily parallel to the maximum resolved shear stress but are consistent with local stress perturbations. This leads us to ask as to what extent the Wallace and Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. Here, a geomechanical multi-parametric study using a 3D boundary element method, covering (i) fault geometries such as intersected faults or corrugated fault surfaces, (ii) the full range of Andersonian state of stress, (iii) fault friction, (iv) fault fluid pressure, (v) half space effect and (vi), rock properties, is performed in order to understand the effect of each parameter on the misfit angle between geomechanical slip vectors and the resolved shear stresses. It is shown that significant misfit angles can be found under specific configurations invalidating the Wallace and Bott assumptions, even though fault friction tends to minimize the misfit. We therefore conclude that in such cases, stress inversions based on fault slip data should be interpreted with care.
ISSN: 0040-1951

hal-01218418
https://hal.archives-ouvertes.fr/hal-01218418
DOI : 10.1016/j.tecto.2015.06.030

Éditeur(s) : HAL CCSD
Résumé : The ecological success of cnidarian-dinoflagellate symbiosis mainly relies on nutrient recycling. Environmental changes, such as global warming or pollution, often result to symbiosis breakdown, also called cnidarian bleaching. The understanding of mechanisms regulating the symbiosis establishment, maintenance and breakdown is essential to prevent massive bleaching phenomena. In this respect, my PhD project focused on the characterization of chemical mediators expressed in the sea anemone Anemonia viridis, their localization and their modulation by stress conditions. A comparative study was first conducted to characterize the chemical mediators and analyze their distribution within the symbiotic sea anemone. We described a great abundance and diversity of lipids in A. viridis tissues. From these results, we proposed possible transfers of FAs between the symbiotic partners. A thermal stress and a chemical stress have also been applied in laboratory-controlled conditions in order to induce symbiosis breakdown and bleaching of the sea anemones, in order to correlate A. viridis metabolome to its symbiotic status. A mapping of these metabolites has been performed by MALDI-MSI of tentacle cross-sections, as well as their evolution following stress. Some betaine lipids have thus been proposed as short-term indicators of stress. A. viridis stress response has also been evaluated with a lipidomic approach, and allowed to identify 3 lipid indicators of early stress response based on membrane fluidity markers. Overall, this study provides insight on key chemical mediators that may regulate the symbiosis maintenance, and may contribute to the symbiosis breakdown.
Le succès évolutif des Cnidaires symbiotiques réside en grande partie dans leurs échanges trophiques établis avec les Dinoflagellés du genre Symbiodinium. Cependant, le réchauffement climatique global ainsi que les pollutions ont un impact fort sur les écosystèmes coralliens, notamment en conduisant à la rupture de la symbiose, phénomène appelé blanchissement. La compréhension des mécanismes qui régissent l’établissement, le maintien et la rupture de la symbiose est essentielle à la prévention des épisodes de blanchissement massif. Dans ce contexte, les objectifs de mon projet de thèse sont de caractériser les médiateurs chimiques de l’anémone de mer Anemonia viridis, de les localiser, et d’analyser leur réponse face à un stress. Parmi les composés caractérisés, les lipides et les bétaïnes sont les plus abondants et présentent une grande diversité. Certains sont transférés des symbiotes vers l’hôte. Des anémones de mer ont ensuite été traitées en laboratoire afin de provoquer la rupture de la symbiose et le blanchissement des individus. Une étude cinétique a été menée par une approche globale comparative identique à celle réalisée sur l’anémone symbiotique. Par ailleurs, une cartographie de l’évolution de composés clé a été réalisée par MALDI-MSI. La réponse au stress a été évaluée et a permis d’identifier des lipides de bétaïne et trois indicateurs lipidiques comme marqueurs de réponse précoce au stress. L’ensemble de ces résultats apporte de nouveaux éléments de réponse concernant le rôle des médiateurs chimiques clés dans le maintien de la symbiose, ainsi que leur influence sur sa rupture.
https://tel.archives-ouvertes.fr/tel-01310668

NNT : 2015NICE4108
tel-01310668
https://tel.archives-ouvertes.fr/tel-01310668
https://tel.archives-ouvertes.fr/tel-01310668/document
https://tel.archives-ouvertes.fr/tel-01310668/file/2015NICE4108.pdf

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Sinkholes are frequently observed where soluble rocks are present, in meteoritic recharge areas or when subsurface dissolution causes ground collapse. Seismic profiles on the inner shelf of the Gulf of Lions (W. Mediterranean) display a giant atypical sub-circular structure, up to 800-m thick and 2-km wide. It is characterized by down-warped internal seismic reflections forming a concave V-shaped depression rooted in the substratum, most likely carbonated. This structure is interpreted as a poly-phased solution-subsidence/collapse structure of Plio-Quaternary age. The last phase of deformation probably occurred during the last sea-level low-stand phase. The mechanism proposed for the creation of this structure is collapse/dissolution of the soluble substratum, as a result of a combination of several possible factors including pre-existing deep Messinian palaeo-karst with active groundwater flows during Plio-Quaternary lowstands, and deep-rooted acidic fluids ascending through the substratum.
ISSN: 0954-4879

hal-00758063
https://hal.archives-ouvertes.fr/hal-00758063
DOI : 10.1111/j.1365-3121.2011.01051.x

Éditeur(s) : HAL CCSD
Résumé : 1 page
The main aim of this study, co-funded by BRGM, Regional Council of Guadeloupe, European Union, ADEME and UAG, was to examine the silica deposition mechanisms and estimate their deposition kinetics at acidic and basic pH conditions, during the cooling from 260 to 25°C of separated waters, discharged from production wells, located in the Bouillante geothermal field. The acquisition of this type of information is very useful not only for the geothermal exploitation but especially, if production fluids are re-injected in the ground, as this is envisaged in the Bouillante geothermal field. The different on site experiments showed that, in these conditions, the silica deposition was always initiated by a silica polymerization mechanism and the formation of a white colloidal gel, which slowed down the silica precipitation. In agreement with the literature data, this polymerization mechanism is characterized by an order 2 kinetic law, strongly dependant on pH. The determination of the specific surface area by specific mercury porosimetry for this gel (250 m2/g) in the UAG laboratories, allowed estimating the corresponding kinetic constant at 25°C. Other experiments at different final temperatures (50, 75 and 100°C) are necessary in order to define this constant as a function of the temperature. The silica precipitation under amorphous silica form was observed much later, after the polymerization stage, and only in particular conditions (long time of atmospheric exposure, water stagnation...). The pH of the Bouillante geothermal fluid is estimated to be close to 5.3±0.3, at 260°C, in the reservoir conditions. If this parameter, very influent on the kinetics of silica deposition, can be preserved at values less than 7 during the re-injection of the production fluids in the ground at relatively high temperatures (150-160°C), it is strongly probable that no chemical treatment is necessary to avoid silica precipitation.
19ème Conférence Géologique de la Caraïbe - 2011
Gosier, Guadeloupe, France

hal-00575943
https://hal-brgm.archives-ouvertes.fr/hal-00575943

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Highly siderophile element concentrations (HSE: Re and platinum-group elements (PGE)) are presented for gabbros, gabbroic eclogites and basaltic eclogites from the high-pressure Zermatt-Saas ophiolite terrain, Switzerland. Rhenium and PGE (Os, Ir, Ru, Rh, Pt, Pd) abundances in gabbro- and eclogite-hosted sulphides, and Re-Os isotopes and elemental concentrations in silicate phases are also reported. This work, therefore, provides whole rock and mineral-scale insights into the PGE budget of gabbroic oceanic crust and the effects of subduction metamorphism on gabbroic and basaltic crust. Chondrite-normalised PGE patterns for the gabbros are similar to published mid-ocean ridge basalts (MORB), but show less inter-element fractionation. Mean Pt and Pd contents of 360 and 530 pg/g, respectively, are broadly comparable to MORB, but gabbros have somewhat higher abundances of Os, Ir and Ru (mean: 64, 57 and 108 pg/g). Transformation to eclogite has not significantly changed the concentrations of the PGE, except Pd which is severely depleted in gabbroic eclogites relative to gabbros (similar to 75% loss). In contrast, basaltic eclogites display significant depletion of Pt (>= 60%), Pd (>85%) and Re (50-60%) compared with published MORB, while Os, Ir and Ru abundances are broadly comparable. Thus, these data suggest that only Pt, Pd and Re, and not Os, Ir and Ru, may be significantly fluxed into the mantle wedge from mafic oceanic crust. Re-Os model ages for gabbroic and gabbroic eclogite minerals are close to age estimates for igneous crystallisation and high-pressure metamorphism, respectively, hence the HSE budgets can be related to both igneous and metamorphic behaviour. The gabbroic budget of Os, Ir, Ru and Pd (but not Pt) is dominated by sulphide, which typically hosts >90% of the Os, whereas silicates account for most of the Re (with up to 75% in plagioclase alone). Sulphides in gabbroic eclogites tend to host a smaller proportion of the total Os (10-90%) while silicates are important hosts, probably reflecting Os inheritance from precursor phases. Garnet contains very high Re concentrations and may account for >50% of Re in some samples. The depletion of Pd in gabbroic eclogites appears linked, at least in part, to the loss of Ni-rich sulphide. Both basaltic and gabbroic oceanic crust have elevated Pt/Os ratios, but Pt/Re ratios are not sufficiently high to generate the coupled Os-186-Os-187 enrichments observed in some mantle melts, even without Pt loss from basaltic crust. However, the apparent mobility of Pt and Re in slab fluids provides an alternative mechanism for the generation of Pt- and Re-rich mantle material, recently proposed as a potential source of Os-187-Os-186 enrichment.
ISSN: 0016-7037

hal-00420072
https://hal.archives-ouvertes.fr/hal-00420072
DOI : 10.1016/j.gca.2008.11.036

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Random walk (RW) methods are recurring Monte Carlo methods used to modelconvective and diffusive transport in complex heterogeneous media. Many applications canbe found, including fluid mechanic, hydrology and chemical reactors modeling. These methodsare easy to implement, very versatile and flexible enough to become appealing for manyapplications because they generally overlook or deeply simplify the building of explicit complexmeshes required by deterministic methods. RWprovides a good physical understandingof the interactions between the space scales of heterogeneities and the transport phenomenaunder consideration. In addition, they can result in efficient upscaling methods, especiallyin the context of flow and transport in fractured media. In the present study, we review theapplications of RW to several situations that cope with diverse spatial scales and differentinsights into upscaling problems. The advantages and downsides of RW are also discussed,thus providing a few avenues for further works and applications.
ISSN: 0169-3913

insu-01308060
https://hal-insu.archives-ouvertes.fr/insu-01308060
DOI : 10.1007/s11242-016-0693-z

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Analysis of the microstructures in the km-scale mantle shear zone that separates the northern and the central parts of the Lanzo peridotite massif provides evidence of an evolution in time and space of deformation processes accommodating shearing in the shallow mantle within an extensional setting. This shear zone displays an asymmetric distribution of deformation facies. From south to north, gradual reorientation of the foliation of coarse porphyroclastic plagioclase-bearing peridotites is followed by development of protomylonites, mylonites, and mm-scale ultramylonite bands. A sharp grain size gradient marks the northern boundary. Early deformation under near-solidus conditions in the south is recorded by preservation of weakly deformed interstitial plagioclase and almost random clinopyroxene and plagioclase crystal orientations. Feedback between deformation and melt transport probably led to melt focusing and strain weakening in the shear zone. Overprint of melt-rock reaction microstructures by solid-state deformation and decrease in recrystallized grain size in the protomylonites and mylonites indicate continued deformation under decreasing temperature. Less enriched peridotite compositions and absence of ultramafic dykes or widespread melt-impregnation microstructures north of the shear zone and clinopyroxene and amphibole enrichment in the mylonites and ultramylonites suggest that the shear zone acted as both a thermal barrier and a high-permeability channel for late crystallizing fluids. These observations, together with chemical data indicating faster cooling of central Lanzo relative to the northern body, corroborate that this shear zone is a mantle detachment fault. All deformation facies have crystal preferred orientations consistent with deformation by dislocation creep with dominant activation of the (010)[100] and (100)[001] systems in olivine and orthopyroxene, respectively. Dynamic recrystallization produces dispersion of olivine CPO but not a change of dominant deformation mechanism. Evidence for activation of grain boundary sliding is limited to mm-scale ultramylonite bands, where solid-state reactions produced very fine grained polymineralic aggregates. Except for these latest stages of deformation, strain localization does not result from the microstructural evolution; the grain size decrease is a consequence of the need to deform a rock volume whose strength continuously increases because of decreasing temperature conditions. Strain localization in the intermediate levels thus essentially results from the more localizing behavior of both the deep, partially molten, and shallow parts of this extensional shear zone distribution.
ISSN: 1525-2027

hal-00644844
https://hal.archives-ouvertes.fr/hal-00644844
DOI : 10.1029/2011GC003627

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : Xenoliths brought up by kimberlite magmas are rare samples of otherwise inaccessible lithospheric mantle. Eclogite xenoliths are found in most cratons and commonly show a range of mineral and chemical compositions that can be used to better understand craton formation. This study focuses on five new kyanite-bearing eclogites from the Udachnaya kimberlite pipe (367±5 Ma). They are fine-to coarse-grained and consist mainly of “cloudy” clinopyroxene (cpx) and garnet (grt). The clinopyroxene is Al,Na-rich omphacite while the garnet is Ca-rich, by contrast to typical bi-mineral (cpx+grt) eclogites that contain Fe- and Mg-rich garnets. The Udachnaya kyanite eclogites are similar in modal and major element composition to those from other cratons (Dharwar, Kaapvaal, Slave, West African). The kyanite eclogites have lower REE concentrations than bi-mineral eclogites and typically contain omphacites with positive Eu and Sr anomalies, i.e. a “ghost plagioclase signature”. Because such a signature can only be preserved in nonmetasomatised samples, we infer that they were present in the protoliths of the eclogites. It follows that subducted oceanic crust is present at the base of the Siberian craton. Similar compositions and textures are also seen in kyanite eclogites from other cratons, which we view as evidence for an Archean, subduction-like formation mechanism related to craton accretion. Thus, contrary to previous work that classifies all kyanite eclogites as type I (IK), metasomatized by carbonatite/kimberlitic fluids, we argue that some of them, both from this work and those from other cratons, belong to the non-metasomatized type II (IIB). The pristine type IIB is the nearest in composition to protoliths of mantle eclogites because it contains no metasomatic enrichments.
ISSN: 0037-9409

hal-01622617
https://hal.archives-ouvertes.fr/hal-01622617
DOI : 10.1051/bsgf/2017008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fault affecting silicoclastic sediments are commonly enriched in clay minerals. Clays are sensitive to fluid–rock interactions and deformation mechanisms; in this paper, they are used as proxy for fault activity and behavior. The present study focuses on clay mineral assemblages from the Point Vert normal fault zone located in the Annot sandstones, a Priabonian-Rupelian turbidite succession of the Alpine foredeep in SE France. In this area, the Annot sandstones were buried around 6–8 km below the front of Alpine nappes soon after their deposition and exhumed during the middle-late Miocene. The fault affects arkosic sandstone beds alternating with pelitic layers, and displays throw of about thirty meters. The fault core zone comprises intensely foliated sandstones bounding a corridor of gouge about 20 cm thick. The foliated sandstones display clay concentration along S–C structures characterized by dissolution of K-feldspar and their replacement by mica, associated with quartz pressure solution, intense microfracturation and quartz vein precipitation. The gouge is formed by a clayey matrix containing fragments of foliated sandstones and pelites. However, a detailed petrographical investigation suggests complex polyphase deformation processes. Optical and SEM observations show that the clay minerals fraction of all studied rocks (pelites and sandstones from the damage and core zones of the fault) is dominated by white micas and chlorite. These minerals have two different origins: detrital and newly-formed. Detrital micas are identified by their larger shape and their chemical composition with a lower Fe–Mg content than the newly-formed white micas. In the foliated sandstones, newly-formed white micas are concentrated along S–C structures or replace K-feldspar. Both types of newly formed micas display the same chemical composition confirmed microstructural observations suggesting that they formed in the same conditions. They have the following structural formulas: Na0.05 K0.86 (Al 1.77 Fe0.08 Mg0.15) (Si3.22 Al0.78) O10 (OH)2. They are enriched in Fe and Mg compared to the detrital micas. Newly-formed chlorites are associated with micas along the shear planes. According to microprobe analyses, they present the following structural formula: (Al1,48 Fe2,50 Mg1,84) (Si2,82 Al1,18) O10 (OH)8. All these data suggest that these clay minerals are synkinematic and registered the fault activity. In the gouge samples, illite and chlorite are the major clay minerals; smectite is locally present in some samples.In the foliated sandstones, Kubler Index (KI) ((001) XRD peak width at half height) data and thermodynamic calculations from synkinematic chlorite chemistry suggest that the main fault deformation occurred under temperatures around 220 °C (diagenesis to anchizone boundary). KI measured on pelites and sandstones from the hanging and footwall, display similar values coherent with the maximal burial temperature of the Annot sandstones in this area. The gouge samples have a higher KI index, which could be explained by a reactivation of the fault at lower temperatures during the exhumation of the Annot sandstones formation
ISSN: 0191-8141

hal-01172423
https://hal.archives-ouvertes.fr/hal-01172423
DOI : 10.1016/j.jsg.2015.03.012

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Sickle cell anaemia (SCA) is the most frequent genetic haemoglobinopathy, which exhibits a highly variable clinical course characterized by hyper-coagulable and pro-inflammatory states, as well as endothelial dysfunction. Extracellular microvesicles are released into biological fluids and play a role in modifying the functional phenotype of target cells. We hypothesized that potential differences in plasma-derived extracellular microvesicles (EV) function and cargo from SCA patients may underlie divergent clinical trajectories. Plasma EV from SCA patients with mild, intermediate and severe clinical disease course were isolated, and primary endothelial cell cultures were exposed. Endothelial cell activation, monocyte adhesion, barrier disruption and exosome cargo (microRNA microarrays) were assessed. EV disrupted the endothelial barrier and induced expression of adhesion molecules and monocyte adhesion in a SCA severity-dependent manner compared to healthy children. Microarray approaches identified a restricted signature of exosomal microRNAs that readily distinguished severe from mild SCA, as well as from healthy children. The microRNA candidates were further validated using quantitative real time polymerase chain reaction assays, and revealed putative gene targets. Circulating exosomal microRNAs may play important roles in predicting the clinical course of SCA, and in delineation of individually tailored, mechanistically-based clinical treatment approaches of SCA patients in the near future.
ISSN: 0007-1048

hal-01668328
https://hal.univ-antilles.fr/hal-01668328
DOI : 10.1111/bjh.14104

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The analysis of three cataclastic band sets from Provence (France) reveals that the band density, their conjugate angles, their ratio of shear displacement to compaction, and the amount of cataclasis within the bands differ and can be expressed as functions of tectonic setting and petrophysical properties. We identify (1) a dense and closely spaced network of shear-enhanced (reverse) compaction bands; (2) a regularly spaced less dense network of reverse compactional shear bands; and (3) a localized network of normal shear bands. The field data show that strain localization is favored in an extensional regime and is characterized by shear bands with a large shear to compaction ratio and a small conjugate band angle. In contrast, distributed strain is favored in a contractional regime and is characterized by compactional bands with a low ratio of shear to compaction and a large conjugate band angle. To explain the mechanical origin of this strain localization, we quantify the yield strength and the stress evolution in extensional and contractional regimes in a frictional porous granular material. We propose a model of strain localization in porous sands as a function of tectonic stresses, burial depth, material properties, strain hardening and fluid pressure. Our model suggests that stress reduction, inherent to extensional regime, favors strain localization as shear bands, whereas stress increase during contraction favors development of compactional bands.
ISSN: 0191-8141

hal-00856921
https://hal.archives-ouvertes.fr/hal-00856921
DOI : 10.1016/j.jsg.2012.11.011

Éditeur(s) : HAL CCSD Wiley
Résumé : Clay shale landscapes are sensitive to landslide, erosion, and re-sedimentation processes. In this context, tectonized clay shales have peculiar hydrological and mechanical behaviours. In order to improve our understanding of the processes involved in such systems, an experimental site has been settled in the Draix Observatory (ORE DRAIX) on a black marl hill slope of the Southern Alps (France) in the framework of the ECOU-PREF project. The site is a natural laboratory to study the evolution of clay shale landscapes at several scales (regional to µm). In this study, we aim to characterize the internal structure and fissure patterns of a stable interfluve, in order to locate preferential water flows within the system, and anticipate its evolution. This work is based on a series of mutli-disciplinary approaches including petrophysical analyses, well pulse injection tests and downhole geophysical measurements. Borehole geophysical results were combined with laboratory measurements on core plugs (permeability, density, porosity, and acoustic velocity). Optical and acoustical images have been used as an original tool for internal discontinuities characterisation and potential active flow path detection. They allowed the identification of three main lithological units interpreted as several stages of shale alteration. In addition, several main structural plane discontinuities (open fractures, schistosity planes, and fractures infilled with calcite or clays) were identified from the images and their potential transmissivity discussed with regard to piezometric and tracer measurements. In all, the integration of measurements leads to propose a simple scenario of fluid circulation and chemical alteration of the interfluve.
ISSN: 0885-6087

hal-00757581
https://hal.archives-ouvertes.fr/hal-00757581
DOI : 10.1002/hyp.7997