Éditeur(s) : HAL CCSD Elsevier
Résumé : We present the hierarchical matrix (H-matrix) technique combined with the adaptive cross-approximation (ACA) applied to a three-dimensional (3D) elastostatic problem using the boundary element method (BEM). This is used in structural geology and geomechanics for the evaluation of the deformation and perturbed stress field associated with surfaces of displacement discontinuity. Such optimization significantly reduces (i) the time and memory needed for the resolution of the system of equations, but more importantly (ii) the time needed for the post-processing at observation points where the deformation and the perturbed stress field are evaluated. Specifically, it is shown that the H-matrix structure used with the ACA, clearly captures the kernel smoothness during the post-processing stage according to the field point positions, and optimizes the computation accordingly. Combined with the parallelization on multi-core processors, this technique allows intensive computations to be done on personal desktop and laptop computers. Numerical simulations are presented, showing the advantages of such optimizations compared to the standard method.
ISSN: 0955-7997

hal-00561032
https://hal.archives-ouvertes.fr/hal-00561032
DOI : 10.1016/j.enganabound.2009.10.016

Éditeur(s) : HAL CCSD Royal Society of Chemistry
Résumé : International audience
Abstract View references (60)Here we show the long term performance at high temperatures of a multi-tube module containing 8 membranes in 4 parallel lines with a total of 545 cm 2 area. The membranes were prepared via thin film dip coating of cobalt oxide silica (CoO xSi) sol-gel on tubular alumina supports. A preliminary study found that the sol-gel containing 20 mol% cobalt oxide formed the best microporous structure with the highest surface area and pore volume. All resulting membranes delivered permeances of ∼1 × 10 -7 mol m -2 s -1 Pa -1 at 500 °C, indicating a high repeatability for the membrane fabrication process. The permselectivities of helium (He) and hydrogen (H 2) over carbon dioxide (CO 2) and nitrogen (N 2) increased from 10-20 at 100 °C to values close to 1000 at 500 °C. Additionally, the apparent energies of activation (E act) for the smaller kinetic diameter gases He and H 2 at 12.2 and 19.5 kJ mol -1 were high and contrary to the negative values for larger gases N 2 and CO 2 at -1.8 and -7.4 kJ mol -1. These remarkable results were attributed to the molecular sieving mechanism of the microporous silica which was enhanced by the embedding of cobalt oxide into the matrix, delivering structural control with an average pore size of 3 Å. The E act for H 2 permeance was higher than that of He, indicating that the cobalt oxide played an important role in H 2 transport. Two membrane lines performed exceptionally well for binary gas mixture processing with H 2 purity reaching values close to 100% in the permeate stream for argon (Ar) concentrations of up to 80% in the retentate stream. A major finding here is that the binary gas selectivity was independent of temperature, contrary to the permselectivity observed for single gas permeance. Further, the H 2 flow rate was greatly affected by the concentration of Ar in the mixture, while the temperature dependency played only a marginal role. In particular, competitive adsorption in the percolative pathways containing pore constrictions or bottlenecks of the anisotropic CoO xSi matrix allowed Ar to impede H 2 diffusion. Finally, the CoO xSi membranes proved thermally stable and robust for 2000 h of testing for various thermal cycles up to 500 °C. © The Royal Society of Chemistry 2012.
Energy & Environmental Science

hal-01683199
https://hal.univ-antilles.fr/hal-01683199
DOI : 10.1039/c2ee03247c

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : L’article s’intéresse à l’interculturalité entre deux phénomènes culturels que sont le Gwo-ka et le Blues issus de la diaspora africaine aux Amériques. Le Gwo-ka est une expression culturelle née en Guadeloupe, île française située dans la mer des Caraïbes. Le Blues est également une expression culturelle née dans le sud des États-Unis. À partir de l’analyse de leur « matrice » sociohistorique, il s’agira de mettre en évidence les rapprochements entre les différentes fonctions socioculturelles. Nous tenterons de comprendre si la théorie de l’Atlantique Noir de Paul Gilroy, reliant les communautés afro-diasporiques du Nouveau Monde, est valable dans le cadre de notre sujet d’étude.
The article deals with the intercultural exchanges between two cultural movements rooted in the African Diasporas. In Guadeloupe, a French island in the Caribbean, Gwo-ka was born on the plantation in the 17th century. Blues appeared in the southern United-States by the end of the 19th century. In order to illustrate the similarities between these two afro-diasporic cultural phenomena, the article first examines the economic and social factors that prompted their emergence. Second, it compares their socio-cultural functions within their respective communities. Using Paul Gilroy’s theory of the Black Atlantic, the article concludes with a questioning of his thesis within the framework of the present study.
Caraïbes
Guadeloupe
États-Unis

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.4675
http://journals.openedition.org/etudescaribeennes/4675

Éditeur(s) : HAL CCSD National Institute of Environmental Health Sciences
Résumé : International audience
BACKGROUND: Women of reproductive age can be exposed to endocrine-disrupting chemicals (EDCs) at work, and exposure to EDCs in pregnancy may affect fetal growth. OBJECTIVES: We assessed whether maternal occupational exposure to EDCs during pregnancy as classified by application of a job exposure matrix was associated with birth weight, term low birth weight (LBW), length of gestation, and preterm delivery. METHODS: Using individual participant data from 133,957 mother-child pairs in 13 European cohorts spanning births from 1994 through 2011, we linked maternal job titles with exposure to 10 EDC groups as assessed through a job exposure matrix. For each group, we combined the two levels of exposure categories (possible and probable) and compared birth outcomes with the unexposed group (exposure unlikely). We performed meta-analyses of cohort-specific estimates. RESULTS: Eleven percent of pregnant women were classified as exposed to EDCs at work during pregnancy, based on job title. Classification of exposure to one or more EDC group was associated with an increased risk of term LBW [odds ratio (OR) = 1.25; 95% CI: 1.04, 1.49], as were most specific EDC groups; this association was consistent across cohorts. Further, the risk increased with increasing number of EDC groups (OR = 2.11; 95% CI: 1.10, 4.06 for exposure to four or more EDC groups). There were few associations (p < 0.05) with the other outcomes; women holding job titles classified as exposed to bisphenol A or brominated flame retardants were at higher risk for longer length of gestation. CONCLUSION: Results from our large population-based birth cohort design indicate that employment during pregnancy in occupations classified as possibly or probably exposed to EDCs was associated with an increased risk of term LBW.
ISSN: 0091-6765

hal-01405823
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01405823
DOI : 10.1289/EHP208
PUBMED : 27152464

Éditeur(s) : HAL CCSD
Résumé : The presence of biological matter (biofilms) in deep geological sites for storage of, for instance, toxic elements or groundwater in aquifers was clearly proved. That biomass triggers physical and chemical processes which greatly modify the durability and the sustainability of the sites. These processes, mainly from oxidative/reductive reactions, are poorly understood. This is mainly due to the fact that former studies were done at the macroscopic level far away from the micrometric scale where relevant processes induced by bacteria take place. Investigations at microscopic level are needed. Thus, we developed an experimental set-up based on the combined use of optical microscopy (transmission), atomic force microscopy (AFM) and electrical and electro-chemical AFM microscopy (EC_AFM) in order to get simultaneous information on topographic and electro-chemical processes. The first highly sensitive step was to use AFM with biological samples in liquid environment: wepresent here a study about AFM imaging of living, moving or self-immobilized bacteria, in their genuine physiological liquid medium and in true in vivo conditions. No external immobilization protocol, neither chemical nor mechanical was needed. For the first time, the native gliding movements of Gram negative Nostoc cyanobacteria upon the surface were studied by AFM. AFM height and mechanical stiffness data were simultaneously acquired. From these, mechanical parameters, inner turgor pressure and Young modulus, were derived for different bacterial species (Anabaenopsis circularis, Rhodococcus wratislaviensis). Our study revealed that AFM imaging is thus possible on moving living species. These results open a large window on new studies of both dynamical phenomena of practical and fundamental interests such as the formation of biofilms and dynamic properties of bacteria in real physiological conditions. The second delicate step was to combine AFM and optical measurements with electrical ones. We mounted a new experimental set-up coupling real-time (i) monitoring of optical properties as the optical density (OD) evolution related to bulk bacterial growth in liquid or as the counting of number of bacteria adhering on the surface of the sample as well and (ii) electrical and electrochemical measurements. Furthermore, these results will shortly be applied to the optimized monitoring of the in-situ activity of bacteria consuming oil pollutants, following this way, in real-time, the bioremediation of an oilcontaminated soil (ANR ECOTECH_BIOPHY program).
La présence de matière biologique (biofilms) dans les sites de stockage géologique profond, d'éléments toxiques ou encore de l'eau potable des aquifères est maintenant clairement démontrée. Cette biomasse est à l'origine de processus physiques et chimiques qui modifient considérablement la durabilité et la pérennité des sites concernés. Ces processus, principalement de type oxydo-réductif, sont encore mal compris. Ceci est principalement dû aux méthodes d'investigation, principalement macroscopiques, loin de l'échelle micrométrique caractéristique des bactéries. Seules des études, basées sur des méthodes d'investigation locale, peuvent apporter les informations requises. Ainsi, nous avons développé un dispositif expérimental basé sur l'utilisation combinée de la microscopie optique (en transmission), la microscopie à force atomique (AFM) et la microscopie AFM en mode électrique et électrochimique (EC_AFM) afin d'obtenir des informations simultanées sur la topographie de l'échantillon et sur les processus électrochimiques à l'échelle des bactéries. La première étape sensible consistait à utiliser l'AFM sur des échantillons biologiques en milieu liquide: nous présentons ici les résultats de l'imagerie AFM en milieu liquide de plusieurs types de bactéries dans leurs conditions physiologiques naturelles (conditions in vivo). Aucun protocole d'immobilisation, ni chimique ni mécanique, n'a été nécessaire; et pour la première fois, les mouvements de reptation de cyanobactéries Nostoc ont été étudiés par l'AFM. Les études AFM ont permis d'acquérir des données topographiques mais aussi mécaniques : nous avons pu ainsi mesurer le module d'Young, la pression de turgescence de différentes souches bactériennes (Anabaenopsis circularis, Rhodococcus wratislaviensis). Cette étude complète, a révélé que l'imagerie AFM est donc possible sur des espèces vivantes en mouvement. Ces résultats ouvrent une grande fenêtre sur de nouvelles études d'intérêts tels que la formation de biofilms et les propriétés dynamiques de bactéries dans des conditions physiologiques réelles. La deuxième étape délicate était de combiner l'AFM aux mesures optiques et électriques. Nous avons développé un nouveau dispositif expérimental permettant (i) le suivi de l'évolution de la croissance bactérienne par la mesure des propriétés optiques comme la densité optique DO (pour le développement bactérien en volume - milieu planctonique) , ou l'analyse de l'image du substrat par comptage du nombre de bactéries sur la surface de l'échantillon (biofilm), et (ii) les mesures électriques et électrochimiques. L'ensemble de ces résultats sera prochainement appliqué au développement de nouveaux outils de surveillance d'une biodépollution de terrain contaminé par les hydrocarbures, par le suivi in situ et en temps réel de l'activité de bactéries dépolluantes (ECOTECH_BIOPHY ANR).
https://tel.archives-ouvertes.fr/tel-01044714

tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714/document
https://tel.archives-ouvertes.fr/tel-01044714/file/theseDhahri2013.pdf

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
Background : In a recent study, we have demonstrated that amelotin (AMTN) gene structure and its expression during amelogenesis have changed during tetrapod evolution. Indeed, this gene is expressed throughout enamel matrix deposition and maturation in non-mammalian tetrapods, while in mammals its expression is restricted to the transition and maturation stages of amelogenesis. Previous studies of amelogenin (AMEL) gene expression in a lizard and a salamander have shown similar expression pattern to that in mammals, but to our knowledge there are no data regarding ameloblastin (AMBN) and enamelin (ENAM) expression in non-mammalian tetrapods. The present study aims to look at, and compare, the structure and expression of four enamel matrix protein genes, AMEL, AMBN, ENAM and AMTN during amelogenesis in the lizard Anolis carolinensis.Results : We provide the full-length cDNA sequence of A. carolinensis AMEL and AMBN, and show for the first time the expression of ENAM and AMBN in a non-mammalian species. During amelogenesis in A. carolinensis, AMEL, AMBN and ENAM expression in ameloblasts is similar to that described in mammals. It is noteworthy that AMEL and AMBN expression is also found in odontoblasts. Conclusions : Our findings indicate that AMTN is the only enamel matrix protein gene that is differentially expressed in ameloblasts between mammals and sauropsids. Changes in AMTN structure and expression could be the key to explain the structural differences between mammalian and reptilian enamel, i.e. prismatic versus non-prismatic.
ISSN: 2041-9139

Droits : http://creativecommons.org/licenses/by/
hal-01206550
http://hal.upmc.fr/hal-01206550
http://hal.upmc.fr/hal-01206550/document
http://hal.upmc.fr/hal-01206550/file/Gasse_2015_Comparative.pdf
DOI : 10.1186/s13227-015-0024-4

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The late Carboniferous accretionary system of the South Tianshan orogen (North-Western China) underwent complex structural and polymetamorphic evolution. Combined petrological, geochronological and microstructural analysis of (ultra)high-pressure (UHP) metabasites (eclogites and blueschists) enclosed in metapelites show a relict coarse-grained eclogitic fabric S2 surrounded by a dominant fine-grained eclogite and blueschist facies retrograde fabric S2. The S2 fabric is reworked by upright folds F3 that are responsible for a major shortening of the whole accretionary system. For both the eclogite and blueschist, peak and retrograde P–T conditions have been thermodynamically constrained at 25–26 kbar and 425–500 °C and 10–13 kbar and 500−550 °C respectively, suggesting a shared exhumation history. The garnet-whole rock-amphibole isochron in the blueschist yielded Lu–Hf and Sm–Nd ages of 326.0 ± 2.9 Ma and 318.4 ± 3.9 Ma respectively, interpreted to date the prograde to peak metamorphic assemblage. The retrograde path of the eclogite is characterized by heterogeneous omphacite recrystallization into a mylonitic fine-grained matrix and crystallization of blue amphibole. Microstructures in both pristine porphyroclastic and recrystallized fine-grained domains in the eclogite indicate a gradual evolution from constriction-dominated (L>S-type) to flattening-dominated (S>L-type) type of deformation, increase of fabric intensity reflected by gradually growing M-indexes and the development of lattice preferred orientation (LPO) typical for dislocation creep under slightly hydrated conditions. Recrystallization of the matrix in the blueschist is homogeneous, which indicates a matrix dominated channel flow during exhumation. These LPOs evolutions suggest a significant mechanical coupling with the upper plate concomitant with oroclinal bending of the Kazakh orocline. Lock up of Kazakh orocline is responsible for further stress increase resulting in horizontal shortening of South Tianshan accretionary wedge and development of D3 upright folding and steepening of the whole sequence.
ISSN: 1342-937X

hal-01481263
https://hal.archives-ouvertes.fr/hal-01481263
DOI : 10.1016/j.gr.2016.07.007

Éditeur(s) : Proceedings of the 60th GCFI Conference, Punta Cana, Dominican Republic, 5 - 9 Nov 2007. pp.1-11
Résumé : The development of the ecosystemic approach for fisheries supposes to improve integrated analysis of fisheries by considering the biological as well as the socio-economic dimensions of the exploitation. A prerequisite for integrated analysis is the improvement in the knowledge of fleets structure, fleet evolution and allocation of fishing effort in the different fisheries. However, small scale fisheries are often characterized by a lack of knowledge on the vessel fishing activity. This paper first presents a data collection methodology recently applied in the French West (Guadeloupe and Martinique) for the follow up of the whole vessel population. Based on a statistical analysis of these data sets, the paper develops a fleet-metier matrix giving the possibility to identify the structure of the fleet, the metier polyvalence of the vessels but also the origin of fishing mortality on the different exploited fishing resources. We then discuss the interest of this methodology for fisheries analysis and the perspective in terms of fisheries management at regional levels.
Le développement de l’approche écosystémique des pêches suppose de renforcer les analyses couplant les dimensions biologiques et socio-économiques de l’exploitation. Cela passe en particulier par une meilleure connaissance des flottilles de pêche, de leur évolution et l’allocation de l’effort de pêche dans les différentes pêcheries. Dans un contexte de connaissance souvent très limitée sur l’activité de navires de petite pêche, ce papier présente la méthodologie de collecte de données utilisée, dans le cas des îles des Antilles françaises (Guadeloupe et Martinique). Sur la base d’une collecte de données minimale mais exhaustive de l’activité des navires, le papier propose le développement une analyse matricielle (flottilles-métiers) permettant de caractériser la structure des flottilles de pêche, d’identifier leur polyvalence en termes de métiers pratiqués et l’origine de la mortalité par pêche. On discute enfin l’intérêt de ce type d’approche pour l’analyse de pêcheries ainsi que les perspectives pour la gestion des pêches.
El desarollo del estudio del ecosistema de las pescas supone que hay que intensificar los análisis considerando a la vez las dimensiones biológicas y socio-económicas de la explotación. Esto supone un mejor conocimiento de las flotillas de pesca, de su evolucíon y de la atribución del esfuerzo de pesca en las diferentes pesquerías. Sabiendo que los conocimientos sobre la actividad de los buques de pequeña pesca son muchas veces limitados, este documento presenta la metodología de recolección de informaciones estadísticas dada en el caso de las islas de las antillas francesas (Guadeloupe y Martinique). Basándose en una recoleccíon de informaciones estadísticas mínima pero eschaustiva de la actividad de los buques, este documento propone el desarollo de un análisis de las matrices (flotillas-metiers) que permite caracterizar la estructura de las flotillas de pesca y de identificar su caracter polivalente en términos de metiers practicados. No solo permite discutir sobre el impacto de las políticas que tienden a reorientar el esfuerzo de pesca de las especies de los bancos insulares hacia las especies pelágicas, sino también permite discutir sobre el interés de generalizar este tipo de recolección de informaciones estadísticas en los sistemas de observación de las pesquerías a escala de las pequeñas Antillas o de otros espacios pertinentes para la gestión de las pescas. Palabras llaves : flotillas, metiers, actividad de pesca, pequeña pesca, gestión de las pescas

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00243/35456/33985.pdf
http://archimer.ifremer.fr/doc/00243/35456/

Éditeur(s) : Université de Pau et des Pays de l'Adour
Résumé : In a context of decline of European eel (Anguilla anguilla L.) and search for biological markers of habitat use and quality, a multidisciplinary approach was engaged on the Adour estuary and its associated wetlands. Two axes were developed. The first axe aimed at highlighting the successive presence of the species in different ecosystems based on the otolith elemental composition. The second aimed at the evaluation of the chemical pressure underwent by eels based on the contaminant bioconcentration in soft tissues and the early molecular response to the chemical stress. With a view to the analyses of otolith elemental composition taking into account the 3D structure, the low elemental concentration in the matrix and keeping the finest spatial resolution, four micro sampling strategies and multi elemental analyses using femtosecond laser ablation ICP-MS were tested (crater, 1D scan, 2D scan, flash ablation). The strategy showing the best compromise according to the objectives (continuous recording, multi elemental approach) was applied on otolith of yellow eels from the Adour. The simultaneous use of Sr and Ba profiles, after validation, represents a new tool, easy, fast and reliable for the reconstruction of freshwater and brackish ecosystems use by eel avoiding misinterpretation due to vaterite inclusions. Three major behaviors were highlighted on the Adour: a residency in brackish water, a residency in freshwater and nomad behavior. The last one is illustrated by a shift to brackish water after three to four years spent in freshwater. Simultaneously, the study of inorganic and organic contamination of eel soft tissues showed that sampled wetlands are moderately contaminated. These results were confirmed by the first estimation, in wild conditions, of the early response to the chemical stress using the hepatic expression of CYP1A1 gene measured by real time RT-PCR. Conversely, in the downstream part of the Adour estuary, Hg loads in eels, especially methyl mercury, and PCBs analyses indicate values that need further investigations considering the European norms of consumption. The comparison of the different markers used (heavy metal and organochlorinated compounds contamination of soft tissues, condition index) support a lower quality of the estuary despite higher eel growth rate on this site. This study supports the use of numerous markers in integrated studies in order to understand and specify the relationships between eels and their continental growth zones.
Dans un contexte de déclin de l'anguille européenne (Anguilla anguilla L.) et de recherche de marqueurs biologiques retraçant la fréquentation des divers habitats et renseignant sur la qualité de ceux-ci, une approche pluridisciplinaire a été mise en place sur l'estuaire de l'Adour et ses zones humides. Deux axes ont été privilégiés. Le premier cherchait à visualiser la présence successive de l'espèce dans différents écosystèmes en se basant sur la composition élémentaire des otolithes. Le deuxième avait pour but d'évaluer la pression chimique inorganique et organique subie par l'anguille dans les zones d'études en s'appuyant sur la bioconcentration des contaminants dans les tissus mous et la réponse moléculaire précoce au stress chimique. En vue des analyses de la composition élémentaire des otolithes et pour répondre au mieux à la structure en trois dimensions, à la faible concentration des éléments dans la matrice tout en conservant une résolution spatiale la plus fine possible, quatre stratégies de micro-échantillonnage et d'analyses multiélémentaires par ablation laser femtoseconde ICP-MS ont été testées (cratère, scan 1D, scan 2D, ablation flash). La méthodologie présentant le meilleur compromis par rapport aux objectifs fixés (enregistrement continu, approche multiélémentaire) a ensuite été appliquée sur les otolithes d'anguilles jaunes du Bas-Adour. L'utilisation simultanée des profils continus de Sr et de Ba, après validation, constitue un outil facile d'utilisation, rapide et fiable pour reconstruire les historiques de fréquentation des différents écosystèmes estuariens et dulçaquicoles par l'anguille tout en s'affranchissant des problèmes potentiels liés aux inclusions de vatérite, un polymorphe du carbonate de calcium. Trois grands types de comportement ont pu être mis en évidence sur l'Adour : résidence en eau saumâtre, résidence en eau douce et nomadisme. Ce dernier est plus particulièrement illustré par un mouvement marqué vers l'eau saumâtre pour des individus ayant passé de trois à quatre ans dans l'eau douce. Parallèlement, l'étude de la contamination organique et inorganique des tissus mous de l'anguille a permis de déduire à la faible contamination des zones humides échantillonnées. La première estimation en condition naturelle de la réponse précoce au stress chimique par évaluation de l'expression hépatique du gène CYP1A1 par RT-PCR en temps réel confirme ces résultats. En revanche, dans la partie estuarienne aval de l'Adour, les niveaux en Hg, présent en majorité sous sa forme méthylée dans les anguilles, et l'analyse des PCBs indiquent des valeurs qui suscitent un examen plus approfondi au regard des normes européennes en vigueur. La confrontation des différents descripteurs (contamination des tissus mous par les métaux lourds et organochlorés, indice de condition) utilisés conforte la qualité moindre de la zone estuarienne malgré des performances de croissance de l'anguille favorisées sur ces sites. Ainsi, cette étude supporte l'intérêt de la mise en oeuvre de descripteurs multiples utilisés (niveaux de métaux lourds et organochlorés dans les tissus mous, réponse moléculaire au stress chimique, microchimie de l'otolithe, indice de condition, taux de croissance) dans des approches intégrées pour comprendre et préciser les relations existantes entre l'anguille et ses zones de croissance continentales.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2009/these-7381.pdf
http://archimer.ifremer.fr/doc/00000/7381/

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Dentin matrix acidic phosphoprotein 1 (DMP1) is an acidic, highly phosphorylated, noncollagenous protein secreted during dentin and bone formation. Previous functional studies of DMP1 have revealed various motifs playing a role in either mineralization or cell differentiation. We performed an evolutionary analysis of DMP1 to identify residues and motifs that were conserved during 220 millions years (Ma) of mammalian evolution, and hence have an important function. In silico search provided us with 41 sequences that were aligned and analyzed using the Hyphy program. We showed that DMP1 contains 55 positions that were kept unchanged for 220 Ma. We also defined in a more precise manner some motifs that were already known (i.e., cleavage sites, RGD motif, ASARM peptide, glycosaminoglycan chain attachment site, nuclear localization signal sites, and dentin sialophosphoprotein-binding site), and we found five, highly conserved, new functional motifs. In the near future, functional studies could be performed to understand the role played by them.
ISSN: 0022-2844

hal-01545482
https://hal.archives-ouvertes.fr/hal-01545482
DOI : 10.1007/s00239-013-9539-2

Résumé : La mesure directe des contaminants dans l'eau fait appel à des techniques analytiques sophistiquées et coûteuses, difficilement applicables à de nombreux échantillons prélevés le long d'un important linéaire côtier. Par ailleurs, la variabilité du milieu littoral confère une représentativité limitée à une mesure ponctuelle effectuée dans la colonne d’eau. Le biomonitoring utilisant la moule repose sur l’hypothèse que le contenu en contaminant dans la chair de cet animal reflète la concentration en contaminants biodisponibles dans l’eau sous forme particulaire et/ou dissoute, selon un processus de bioaccumulation. Cette hypothèse a été validée pour les substances chimiques de type hydrophobe ou intermédiaire, susceptibles de se bioaccumuler et caractérisées par un coefficient de partage n-octanol – eau supérieur à 3. Les techniques dites des bioindicateurs - quantitatifs utilisent la bioaccumulation pour mesurer les niveaux de contamination chimique du milieu, tout en atténuant les fluctuations à court terme du milieu. Les stratégies développées sont de deux types. Celles qui utilisent les populations indigènes de moules sauvages ou cultivées (biomonitoring passif, cas du RNO) et celles qui ont recours aux transplants d’individus provenant d’un site de référence (biomonitoring actif, cas du Rinbio en Méditerranée). À La Réunion, une étude de pré-faisabilté pour l’utilisation d’une espèce de moule tropicale, Modiolus auriculatus, pour l’évaluation de la qualité du milieu marin insulaire tropical a été réalisée en 2000. Les premières conclusions montraient qu’il existait un réel potentiel pour la mise en oeuvre d’un réseau de type actif. La mise en oeuvre de la Directive Cadre sur l’Eau (DCE) du 21 Octobre 2000, notamment son volet chimique nécessite désormais de disposer d’un outil de surveillance pérenne de la qualité chimique des eaux littorales. Pour réaliser ce projet, l’ARVAM a proposé à la DIREN Réunion d’adapter à une espèce de moule tropicale, le concept du biomonitoring déjà développé en France métropolitaine par l’Ifremer. Aussi, en contribution au plan d’action de l’IFRECOR inscrit dans le DOCUP (mesure C2- 08), l’ARVAM a réalisé en partenariat avec l’Ifremer une étude de faisabilité sur 4 ans (2004 - 2008) : le programme MODIOLE. La présente étude aborde quatre thèmes : • Thème 1 : Etude des foyers naturels de modioles et écophysiologie ; • Thème 2 : Capacités bioaccumulatrices de la modiole ; • Thème 3 : Compléments d’informations sur d’autres matrices naturelles ; • Thème 4 : Faisabilité d’un biomonitoring actif des contaminants chimiques à la Réunion au sein du réseau DCE.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00125/23623/21462.pdf
http://archimer.ifremer.fr/doc/00125/23623/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Previous work has demonstrated that geoelectrical measurements, acquired either along the Earth’s surface or in boreholes, can be sensitive to the presence of fractures. However, a lack of numerical approaches that are well suited to modelling electric current flow in fractured media prevents us from systematically exploring the links between geoelectrical measurements and fractured rock properties. To address this issue, we present a highly computationally efficient methodology for the numerical simulation of geoelectrical data in 2.5-D in complex fractured domains. Our approach is based upon a discrete-dual-porosity formulation, whereby the fractures and rock matrix are treated separately and coupled through the exchange of electric current between them. We first validate our methodology against standard analytical and finite-element solutions. Subsequent use of the approach to simulate geoelectrical data for a variety of different fracture configurations demonstrates the sensitivity of these data to important parameters such as the fracture density, depth, and orientation.
ISSN: 0956-540X

hal-01622151
https://hal.archives-ouvertes.fr/hal-01622151
https://hal.archives-ouvertes.fr/hal-01622151/document
https://hal.archives-ouvertes.fr/hal-01622151/file/sanzGJI2017.pdf
DOI : 10.1093/gji/ggx080

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Two types of olivine occur in kimberlites from Greenland, Canada and southern Africa. The first, xenocrystic olivine, displays several different forms. Most distinctive are 'nodules', a term we use to describe the large (1-5 mm), rounded, single crystals or polycrystalline aggregates that are a common constituent of many kimberlites. Olivine compositions are uniform within single nodules but vary widely from nodule to nodule, from Fo81 to 93. Within many nodules, sub- to euhedral asymmetric tablets have grown within larger anhedral olivine grains. Dislocation structures, particularly in the anhedral grains, demonstrate that this olivine was deformed before being incorporated into the kimberlite magma. Olivine grains in the kimberlite matrix between the nodules have morphologies similar to those of the tablets, suggesting that most matrix olivine grains are parts of disaggregated nodules. We propose that a sub- to euhedral form is not sufficient to identify phenocrysts in kimberlites and provide some criteria, based on morphology, internal deformation and composition, that distinguish phenocrysts from xenocrysts. The second type of olivine is restricted to rims surrounding xenocrystic grains. Only this olivine crystallized from the kimberlite magma. Major and trace element data for the rim olivine are used to calculate the composition of the parental kimberlite liquid, which is found to contain between about 20 and 30% MgO. The bulk compositions of many kimberlites contain higher MgO contents as a result of the presence of xenocrystic olivine. The monomineralic, dunitic, character of the nodules, and the wide range from Fo-rich to Fo-poor olivine compositions, provide major constraints on the origin of the nodules. Dunite is a relatively rare rock in the mantle and where present its olivine is persistently Fo-rich. The dunitic source of the nodules in kimberlites lacked minerals such as pyroxene and an aluminous phase, which make up about half of most mantle-derived rocks. It appears that these minerals were removed from the mantle peridotite that was to become the source of the nodules, and the Fo content of the retained olivine was modified during interaction with CO2-rich fluids whose arrival at the base of the lithosphere immediately preceded the passage of the kimberlite magmas. Fragments of the resultant dunite were entrained into the kimberlite, where they were retained both as intact nodules and as disaggregated grains in the matrix.
ISSN: 0022-3530

insu-00543321
https://hal-insu.archives-ouvertes.fr/insu-00543321
BIBCODE : 10.1093/petrology/egp080
DOI : 10.1093/petrology/egp080

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Mobile-immobile mass transfer is widely used to model non-Fickian dispersion in porous media. Nevertheless, the memory function, implemented in the sink/source term of the transport equation to characterize diffusion in the matrix (i.e., the immobile domain), is rarely measured directly. Therefore, the question can be posed as to whether the memory function is just a practical way of increasing the degrees of freedom for fitting tracer test breakthrough curves or whether it actually models the physics of tracer transport. In this paper we first present a technique to measure the memory function of aquifer samples and then compare the results with the memory function fitted from a set of field-scale tracer tests performed in the same aquifer. The memory function is computed by solving the matrix diffusion equation using a random walk approach. The properties that control diffusion (i.e., mobile-immobile interface and immobile domain cluster shapes, porosity, and tortuosity) are investigated by X-ray microtomography. Once the geometry of the matrix clusters is measured, the shape of the memory function is controlled by the value of the porosity at the percolation threshold and of the tortuosity of the diffusion path. These parameters can be evaluated from microtomographic images. The computed memory function compares well with the memory function deduced from the field-scale tracer tests. We conclude that for the reservoir rock studied here, the atypical non-Fickian dispersion measured from the tracer test is well explained by microscale diffusion processes in the immobile domain. A diffusion-controlled mobileimmobile mass transfer model therefore appears to be valid for this specific case.
ISSN: 0043-1397

insu-00373705
https://hal-insu.archives-ouvertes.fr/insu-00373705
https://hal-insu.archives-ouvertes.fr/insu-00373705/document
https://hal-insu.archives-ouvertes.fr/insu-00373705/file/Gouze_et_al-2008-Water_Resources_Research.pdf
DOI : 10.1029/2007WR006690

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
This study aims at better understanding the respective influences of specific gravity (γ), microfibril angle (MFA), and cell-wall matrix polymers on viscoelastic vibrational properties of wood in axial direction. The wide variations of properties between normal wood (NW) and compression wood (CW) are in focus. Three young bent trees (Picea abies, Pinus sylvestris and Pinus pinaster) that recovered verticality were sampled. Several observed differences between NW and CW were highly significant in terms of anatomical, physical (γ, shrinkage, CIELab colorimetry), mechanical (compressive strength), and vibrational properties. Specific dynamic modulus of elasticity (E'/γ) decreases with increasing MFA, and Young's modulus (E') can be satisfactorily explained by γ and MFA. Apparently, the type of the cell wall polymer matrix is not influential in this regard. The damping coefficient (tanδ) does not depend solely on MFA of NW and CW. The tanδ - E'/γ relationship evidences that, at equivalent E'/γ, the tanδ of CW is approx. 34% lower than that of NW. This observation is ascribed to the more condensed nature of CW lignins, and this is discussed in the context of previous findings in other hygrothermal and time/frequency domains. It is proposed that the lignin structure and the amount and type of extractives, which are both different in various species, are partly responsible for taxonomy-related damping characteristics.
ISSN: 0018-3830

hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062/document
https://hal.archives-ouvertes.fr/hal-00808062/file/Changes_viscoelastic_vibrational_Bremaud_al.pdf
DOI : 10.1515/hf-2011-0186

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The complex electrical impedance of a garnet-biotite-sillimanite residual enclave in the Neogene dacite of El Hoyazo (SE Spain) has been determined up to 978 °C at 200-300 MPa. This well studied material represents a direct sampling of the Alborán Domain thinned lower crust undergoing partial melting. The paragenesis is garnet + biotite + sillimanite + plagioclase + graphite ± cordierite coexisting with widespread (~ 10 wt.%) rhyolitic melt occurring as inclusions and interstitial glass and developed during regional anatexis at 850 ± 50 °C and 500-700 MPa. The samples were used in cyclic measurements consisting in heating-cooling ramps at progressively higher maximum temperature to observe the effect of reactions on conductivity. In the first cycle up to 850 °C at 2-3 kbar, re-melting of the interstitial glass is achieved with no additional reactions and logarithmic conductivity (S/m) is up to − 1.5. At T > 950 °C new melt with orthopyroxene + ilmenite is produced from biotite partial breakdown and the logarithmic conductivity (S/m) is up to − 0.7. Application of mixing models as Hashin-Shtrikman bounds or Archie's Law, shows that once interconnected, melt controls the electrical conductivity of the enclave. The electrical conductivity of the rock can be simulated with the electrical conductivity data obtained on the starting Matrix glass of the enclave and with the new melt. Our experimental results obtained on a graphitic metasedimentary material evidence show that graphite does not contribute to the conductivity enhancement and that the electrical anomaly observed below the Betics can be explained as effect of partial melting of a residual crust. Comparison with previous works on mafic granulites shows that similar conductivity values can be achieved both by melting of a residual felsic crust or by melting of mafic materials and suggests that pelitic rocks can be more common at deep levels than expected.
ISSN: 0040-1951

hal-00823063
https://hal.archives-ouvertes.fr/hal-00823063
DOI : 10.1016/j.tecto.2012.11.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
11 4 : CEA/HC 12 13 Corresponding author: 14 pierre.legoff@cea.fr -+333 80 23 40 00 -+333 80 23 52 09 15 16 Abstract 17 As one of the three natural isotopes of hydrogen, tritium is ubiquitous and might potentially 18 be present in any water or organic molecule that constitutes a biological matrix. Milk is one of 19 the most frequently monitored foodstuffs in the vicinity of chronic release of radionuclides, as 20 it is a very common product and also because it integrates deposition on large areas of grass at 21 a local scale. Different parameters have been studied to assess their impact on the reliability 22 of tritium measurements. The volume of the sample, the technique used to extract the water 23 and the level of dehydration modulate the results but in different ways: dispersion of results, 24 under-or overestimation of the tritium activity. The influence of sample storage and 25 preparation has also been investigated. Methodological improvements of tritium 26 measurements in the free water of milk are proposed. 27 28
ISSN: 0265-931X

hal-01117741
https://hal.archives-ouvertes.fr/hal-01117741
https://hal.archives-ouvertes.fr/hal-01117741/document
https://hal.archives-ouvertes.fr/hal-01117741/file/Tritium%20in%20the%20free%20water%20of%20milk-FINAL.pdf
DOI : 10.1016/j.jenvrad.2013.09.006

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Brecciated and fractured peridotites with a carbonate matrix, referred to as ophicalcites, are common features of mantle rocks exhumed in passive margins and mid-oceanic ridges. Ophicalcites have been found in close association with massive peridotites, which form the numerous ultramafic bodies scattered along the North Pyrenean Zone (NPZ), on the northern flank of the Pyrenean belt. We present the first field, textural and stable isotopic characterization of these rocks. Our observations show that Pyrenean ophicalcites belong to three main types: (1) a wide variety of breccias composed of sorted or unsorted millimeter- to meter-sized clasts of fresh or oxidized ultramafic material, in a fine-grained calcitic matrix; (2) calcitic veins penetrating into fractured serpentine and fresh peridotite; and (3) pervasive substitution of serpentine minerals by calcite. Stable isotopic analyses (O, C) have been conducted on the carbonate matrix, veins and clasts of samples from 12 Pyrenean ultramafic bodies. We show that the Pyrenean ophicalcites are the product of three distinct genetic processes: (1) pervasive ophicalcite resulting from relatively deep and hot hydrothermal activity; (2) ophicalcites in veins resulting from tectonic fracturing and cooler hydrothermal activity; and (3) polymictic breccias resulting from sedimentary processes occurring after the exposure of subcontinental mantle as portions of the floor of basins which opened during the mid-Cretaceous. We highlight a major difference between the eastern and western Pyrenean ophicalcites belonging, respectively, to the sedimentary and to the hydrothermal types. Our data set points to a possible origin of the sedimentary ophicalcites in continental endorheic basins, but a post-depositional evolution by circulation of metamorphic fluids or an origin from relatively warm marine waters cannot be ruled out. Finally, we discuss the significance of such discrepancy in the characteristics of the NPZ ophicalcites in the frame of the variable exhumation history of the peridotites all along the Pyrenean realm.
ISSN: 1437-3254

insu-00944405
https://hal-insu.archives-ouvertes.fr/insu-00944405
https://hal-insu.archives-ouvertes.fr/insu-00944405/document
https://hal-insu.archives-ouvertes.fr/insu-00944405/file/clerc-etal-IJES-Review.pdf
DOI : 10.1007/s00531-013-0927-z

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
On the New Jersey shelf (offshore North America), the presence of pore water fresher than seawater is known from a series of boreholes completed during the 1970s and 1980s. To account for this fresh water, a fi rst hypothesis involves possible present-day active dynamic connections with onshore aquifers, while a second involves meteoritic and/or sub- ice-sheet waters during periods of lowered sea level. Expedition 313 drilled three boreholes on the middle shelf, offering a unique opportunity for the internal structure of the siliciclastic system to be accessed, at scales ranging from the depositional matrix to the continental margin. This enables the stratigraphic architecture to be correlated with the spatial distribution and salinity of saturating fl uids. Expedition 313 revealed both very low salinities (<3 g/L) at depths exceeding 400 m below the seafl oor and evidence for a multilayered reservoir organization, with freshand/ or brackish-water intervals alternating vertically with salty intervals. In this study we present a revised distribution of the salinity beneath the middle shelf. Our observations suggest that the processes controlling salinity are strongly infl uenced by lithology, porosity, and permeability. Saltier pore waters generally occur in coarse-grained intervals and fresher pore waters occur in fi ne-grained intervals. The transition from fresher to saltier intervals is often marked by cemented horizons that probably act as permeability barriers. In the lowermost parts of two holes, the salinity varies independently of lithology, suggesting different mechanisms and/or sources of salinity. We present an interpretation of the sedimentary facies distribution, derived from core, logs, and seismic profi le analyses, that is used to discuss the marginscale two-dimensional reservoir geometry and permeability distribution. These proposed geometries are of primary importance when considering the possible pathways and emplacement mechanisms for the fresh and salty water below the New Jersey shelf.
EISSN: 1553-040X

insu-00858241
https://hal-insu.archives-ouvertes.fr/insu-00858241
DOI : 10.1130/GES00855.1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A set of synthetic aggregates, containing mixtures of calcite and muscovite, were compacted with varying uniaxial loads ranging from 20 MPa up to 400 MPa. Their elastic properties have been measured using compressional and shear waves in confining hydrostatic pressures up to 475 MPa. Measured seismic velocities are shown to depend on 1) the ratio of calcite to muscovite, 2) the uniaxial load used during sample manufacturing, and 3) the porosity amount prior to velocity measurements. The matrix framework may also affect the seismic velocities, but this effect is not easily quantifiable. In general, measured seismic velocities decrease with increasing muscovite content and porosity. Elastic properties have been calculated based on texture measurements, which were obtained by neutron diffraction. The calculated velocities are based on the calcite and muscovite single crystal elastic tensors, their orientation distribution functions, and their modal fractions. A large discrepancy is apparent between calculated and measured velocities, where the former always overestimate the actual velocities. Shear waves display less of a difference between calculated and measured values, than do compressional waves, indicating that waves propagating by shearing are less affected by sample porosity and matrix framework. A better agreement between measured and calculated seismic velocities arises when the initial porosity is taken into account, using a differential effective medium model. Seismic anisotropy is evident from both measured and calculated velocities, and is low for samples containing pure calcite, but becomes prominent as the muscovite concentration increases. The intensity of anisotropy further depends on the uniaxial load used during sample compaction and the initial porosity.
ISSN: 0148-0227

hal-00512666
https://hal.archives-ouvertes.fr/hal-00512666
DOI : 10.1029/2009JB006523