Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The formation age of the Siberian cratonic mantle is not well established as yet. Re–Os data on various mantle-derived materials have shown that it contains Archaean components, but the reported Re-depletion ages show a broad variation range (3.4 to 1 Ga) and are commonly ≤ 2 Ga for peridotite xenoliths. We report Hf and Nd isotope data for cpx and garnet separated from nine refractory spinel and garnet peridotite xenoliths from the Udachnaya kimberlite. The cpx from low-opx spinel harzburgites show extremely high εHf values, from + 607 to + 2084, which testify to long-term evolution of these rocks with high Lu/Hf ratios, consistent with their residual origin and near absence of post-melting enrichments in the Lu–Hf system. Such high εHf values are unusual for cpx from other cratonic peridotites and are higher than those reported for depleted cpx in off-cratonic peridotites. The clinopyroxenes from low-opx spinel harzburgites yield Hf model ages from 1.9 to 1.7 Ga while the cpx from high-opx spinel harzburgites yield Hf model ages from 3.0 to 1.9 Ga. When plotted together, they define a Lu/Hf isochron with an age of 1.80 Ga, which we consider as a robust estimate of the formation age (melt extraction event) because it is obtained on residual rocks that show no evidence for HREE and Hf enrichments and because the model ages for three out of four individual samples are similar to each other. The cpx have high εNd of + 94 to + 123, which are inconsistent with their low Sm/NdPM of < 1 and yield no meaningful age estimates. The consistently high, positive εNd in these cpxs can be interpreted in terms of long-term evolution of refractory peridotites with high Sm/Nd, followed by relatively recent LREE enrichments.We infer that a significant part of the lithospheric mantle in the central Siberian craton may have been formed during a major event (or a series of events) at around 1.8 Ga. Older ages reported for the central Siberian craton may refer to less common materials from cratonic or other domains formed in the Archaean that were later incorporated into the cratonic roots. The transition from the “Archaean” to “modern” tectonic regimes in Siberia and possibly elsewhere may have taken place at 1.8–1.9 Ga rather than at ~ 2.5 Ga, i.e. in the second half of the Paleoproterozoic rather than at the Archaean–Proterozoic boundary, at which time the asthenospheric mantle became generally too cold to experience high-degree melting on a large scale. The ~ 1.8 Ga formation age of the Siberian cratonic mantle is coeval with that for a major part of the ancient continental crust in the central Siberian craton. The temporal crust–mantle links may be explained either by the generation of the initial source materials for continental crust in the same melting event that formed the residual peridotites or, alternatively, by subduction and melting of pre-existing proto-lithosphere destabilized by a major mantle upwelling that formed the residual mantle.
ISSN: 0009-2541

hal-01115519
https://hal.archives-ouvertes.fr/hal-01115519
DOI : 10.1016/j.chemgeo.2014.10.018

Éditeur(s) : HAL CCSD Inter-Research
Résumé : International audience
Ecological connectivity is important for effective marine planning and biodiversity conservation. Our aim was to identify factors important in influencing variation in benthic community structure on shallow rocky reefs in 2 regions of the Mediterranean Sea with contrasting oceanographic regimes. We assessed beta (β) diversity at 146 sites in the littoral and shallow sub-littoral from the Adriatic/Ionian Seas (eastern region) and Ligurian/Tyrrhenian Seas (western region) using a null modelling approach to account for variation in species richness. The distance decay relationship between species turnover within each region and geographic distance by sea was determined using generalised linear models. Mantel tests were used to examine correlations between β diversity and connectivity by ocean currents, estimated from Lagrangian dispersal simulations. Variation in β diversity between sites was partitioned according to environmental and spatial components using a distance-based redundancy approach. Species turnover along a gradient of geographic distance was greater by a factor of 3 to 5 in the western region than the eastern region, suggesting lower con-nectivity between sites. β diversity was correlated with connectivity by ocean currents at both depths in the eastern region but not in the western region. The influence of spatial and environmental predictors of β diversity varied considerably between regions, but was similar between depths. Our results highlight the interaction of oceanographic, spatial and environmental processes influencing benthic marine β diversity. Persistent currents in the eastern region may be responsible for lower observed β diversity compared to the western region, where patterns of water circulation are more variable.
Marine Ecology Progress Series

Droits : http://creativecommons.org/licenses/by/
hal-01357935
https://hal-univ-perp.archives-ouvertes.fr/hal-01357935
https://hal-univ-perp.archives-ouvertes.fr/hal-01357935/document
https://hal-univ-perp.archives-ouvertes.fr/hal-01357935/file/m553p001.pdf
DOI : 10.3354/meps11783

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We aim at testing and validating a mobile-immobile mass transfer model from a set of single-well injection withdrawal tracer tests in a heterogeneous porous aquifer. By varying the duration of the injection phase, different volumes of aquifer are investigated by the tracer. Hence, we focus the transport model validation not only on reproducing a single breakthrough curve (BTC) but also on the model's capacity to predict the amount of mixing as a function of the volume visited by the tracer. All the BTCs are strongly asymmetric, as expected when dispersion is controlled by diffusive mass transfers between the mobile water and the immobile water part of the porosity. However, the BTC cannot be modeled by a conventional mobile-immobile mass transfer model with a simple power law memory function. To account for that, we implement a continuous time random walk model in which the transition time distribution y (t), which is related to the excursion time probability of the tracer in the immobile domain, is a dual-slope power law distribution. The model best fits the BTC data set with a transitional regime controlled by y(t) t2 and an asymptotic regime characteristic of the conventional double-porosity model with y(t) t1.5 . This work emphasizes that high-resolution concentration measurement and multiple-scale tracer tests are required for assessing solute dispersion models in heterogeneous reservoirs and for subsequently obtaining reliable predictions.
ISSN: 0043-1397

insu-00373698
https://hal-insu.archives-ouvertes.fr/insu-00373698
https://hal-insu.archives-ouvertes.fr/insu-00373698/document
https://hal-insu.archives-ouvertes.fr/insu-00373698/file/Borgne_et_al-2008-Water_Resources_Research.pdf
DOI : 10.1029/2007WR006279

Éditeur(s) : Springer
Résumé : Interannual variability of subtropical sea-surface-height (SSH) anomalies, estimated by satellite and tide-gauge data, is investigated in relation to wintertime daily North-Atlantic weather regimes. Sea-level anomalies can be viewed as proxies for the subtropical gyre intensity because of the intrinsic baroclinic structure of the circulation. Our results show that the strongest correlation between SSH and weather regimes is found with the so-called Atlantic-Ridge (AR) while no significant values are obtained for the other regimes, including those related to the North Atlantic Oscillation (NAO), known as the primary actor of the Atlantic dynamics. Wintertime AR events are characterized by anticyclonic wind anomalies off Europe leading to a northward shift of the climatological wind-stress curl. The latter affects subtropical SSH annual variability by altered Sverdrup balance and ocean Rossby wave dynamics propagating westward from the African coast towards the Caribbean. The use of a simple linear planetary geostrophic model allows to quantify those effects and confirms the primary importance of the winter season to explain the largest part of SSH interannual variability in the Atlantic subtropical gyre. Our results open new perspectives in the comprehension of North-Atlantic Ocean variability emphasizing the role of AR as a driver of interannual variability at least of comparable importance to NAO.
Climate Dynamics (0930-7575) (Springer), 2013-09 , Vol. 41 , N. 5-6 , P. 1159-1171

Droits : Springer-Verlag Berlin Heidelberg 2012
http://archimer.ifremer.fr/doc/00161/27248/25480.pdf
DOI:10.1007/s00382-012-1578-7
http://archimer.ifremer.fr/doc/00161/27248/

Éditeur(s) : HAL CCSD Wiley
Résumé : Hydraulic habitat models based on the preferences of species for the hydraulic characteristics of their microhabitats are frequently used to evaluate the impact on the habitat of a change in river flow regime. Their application in a tropical insular environment is still limited as little is known about the hydraulic preferences of species. Hydraulic preference models have been developed for 15 taxa (diadromous shrimps and fishes) sampled in 52 rivers in the Caribbean (the French West Indies) and the Indian Ocean (the Reunion island). Five datasets were used and group 8353 samples collected by electrofishing during 320 surveys (reach date) performed between 1999 and 2011. Generalized additive models were used to link variations of taxa density within surveys to the hydraulic characteristics of the microhabitat (velocity, depth and substrate). Hydraulic preferences within each region (Caribbean and Indian Ocean) are significant for most of the taxa and vary little between rivers and surveys. The hydraulic variables explain up to 18.1% (univariate models) and 30.0% (multivariate models) of the deviance of densities within survey. Of the taxa selected, Atya scabra, Macrobrachium heterochirus, Xiphocaris elongata and the Sicydiinae are the most demanding.
ISSN: 1535-1459

hal-01072479
https://hal.archives-ouvertes.fr/hal-01072479
https://hal.archives-ouvertes.fr/hal-01072479/document
https://hal.archives-ouvertes.fr/hal-01072479/file/ly2014-pub00038946.pdf
DOI : 10.1002/rra.2675

Éditeur(s) : HAL CCSD American Society of Mechanical Engineers
Résumé : International audience
The isothermal flow in a model channel of plate-fin heat exchanger with periodically arranged embossed-like vortex generators is investigated. Velocity measurements are performed by LDA in the transitional regime (Reynolds number from 1000 up to 5000). Strong longitudinal vortices are observed downstream of each generator. The vortex roll-up process is highlighted by the evolution of the velocity vector field in the cross section of the flow. The modifications of the vortex characteristics after successively encountered generators are investigated. This work shows most of the flow features which are known to produce heat transfer enhancement, and shows that these smooth shaped vortex generators are very promising for enhanced heat exchangers.
ISSN: 0098-2202

hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938/document
https://hal.archives-ouvertes.fr/hal-01582938/file/Dupont_heat_exchanger_JFE2002_preprint.pdf
DOI : 10.1115/1.1595675

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Background and Aims: In rain forests, sapling survival is highly dependent on the regulation of trunk slenderness (height/diameter ratio): shade-intolerant species have to grow in height as fast as possible to reach the canopy but also have to withstand mechanical loadings (wind and their own weight) to avoid buckling. Recent studies suggest that mechanosensing is essential to control tree dimensions and stability-related morphogenesis. Differences in species slenderness have been observed among rainforest trees; the present study thus investigates whether species with different slenderness and growth habits exhibit differences in mechanosensitivity. Methods: Recent studies have led to a model of mechanosensing (sum-of-strains model) that predicts a quantitative relationship between the applied sum of longitudinal strains and the plant's responses in the case of a single bending. Saplings of five different neotropical species (Eperua falcata, E. grandiflora, Tachigali melinonii, Symphonia globulifera and Bauhinia guianensis) were subjected to a regimen of controlled mechanical loading phases (bending) alternating with still phases over a period of 2 months. Mechanical loading was controlled in terms of strains and the five species were subjected to the same range of sum of strains. The application of the sum-of-strain model led to a dose-response curve for each species. Dose-response curves were then compared between tested species. Key Results: The model of mechanosensing (sum-of-strain model) applied in the case of multiple bending as long as the bending frequency was low. A comparison of dose-response curves for each species demonstrated differences in the stimulus threshold, suggesting two groups of responses among the species. Interestingly, the liana species B. guianensis exhibited a higher threshold than other Leguminosae species tested. Conclusions: This study provides a conceptual framework to study variability in plant mechanosensing and demonstrated interspecific variability in mechanosensing.
ISSN: 0305-7364

halsde-00454145
https://hal.archives-ouvertes.fr/halsde-00454145
DOI : 10.1093/aob/mcp286

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Rifting in a cratonic lithosphere is strongly controlled by several interacting processes including crust/mantle rheology, magmatism, inherited structure and stress regime. In order to better understand how these physical parameters interact, a 2 yr long seismological experiment has been carried out in the North Tanzanian Divergence (NTD), at the southern tip of the eastern magmatic branch of the East African rift, where the southward-propagating continental rift is at its earliest stage. We analyse teleseismic data from 38 broad-band stations ca. 25 km spaced and present here results from their receiver function (RF) analysis. The crustal thickness and Vp/Vs ratio are retrieved over a ca. 200 × 200 km2 area encompassing the South Kenya magmatic rift, the NTD and the Ngorongoro-Kilimanjaro transverse volcanic chain. Cratonic nature of the lithosphere is clearly evinced through thick (up to ca. 40 km) homogeneous crust beneath the rift shoulders. Where rifting is present, Moho rises up to 27 km depth and the crust is strongly layered with clear velocity contrasts in the RF signal. The Vp/Vs ratio reaches its highest values (ca. 1.9) beneath volcanic edifices location and thinner crust, advocating for melting within the crust. We also clearly identify two major low-velocity zones (LVZs) within the NTD, one in the lower crust and the second in the upper part of the mantle. The first one starts at 15–18 km depth and correlates well with recent tomographic models. This LVZ does not always coexist with high Vp/Vs ratio, pleading for a supplementary source of velocity decrease, such as temperature or composition. At a greater depth of ca. 60 km, a mid-lithospheric discontinuity roughly mimics the step-like and symmetrically outward-dipping geometry of the Moho but with a more slanting direction (NE–SW) compared to the NS rift. By comparison with synthetic RF, we estimate the associated velocity reduction to be 8–9 per cent. We relate this interface to melt ponding, possibly favouring here deformation process such as grain-boundary sliding (EAGBS) due to lithospheric strain. Its geometry might have been controlled by inherited lithospheric fabrics and heterogeneous upper mantle structure. We evidence that crustal and mantle magmatic processes represent first order mechanisms to ease and locate the deformation during the first stage of a cratonic lithospheric breakup.
ISSN: 0956-540X

hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078/document
https://hal.archives-ouvertes.fr/hal-01622078/file/plasmanGJI2017.pdf
DOI : 10.1093/gji/ggx177

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The El Oro metamorphic province of SW Ecuador is a composite massif made of juxtaposed terranes of both continental and oceanic affinity that has been located in a fore-arc position since Late Paleozoic times. Various geochemical, geochronological, and metamorphic studies have been undertaken on the El Oro metamorphic province, providing an understanding of the origin and age of the distinct units. However, the internal structures and geodynamic evolution of this area remain poorly understood. Our structural analysis and thermal modeling in the El Oro metamorphic province show that this fore-arc zone underwent four main geological events. (1) During Triassic times (230–225 Ma), the emplacement of the Piedras gabbroic unit at crustal-root level (~9 kbar) triggered partial melting of the metasedimentary sequence under an E-W extensional regime at pressure-temperature conditions ranging from 4.5 to 8.5 kbar and from 650 to 900°C for the migmatitic unit. (2) At 226 Ma, the tectonic underplating of the Arenillas-Panupalí oceanic unit (9 kbar and 300°C) thermally sealed the fore-arc region. (3) Around the Jurassic-Cretaceous boundary, the shift from trench-normal to trench-parallel subduction triggered the exhumation and underplating of the high-pressure, oceanic Raspas Ophiolitic Complex (18 kbar and 600°C) beneath the El Oro Group (130–120 Ma). This was followed by the opening of a NE-SW pull-apart basin, which tilted the massif along an E-W subhorizontal axis (110 Ma). (4) In Late Cretaceous times, an N-S compressional event generated heterogeneous deformation due to the presence of the Cretaceous Celica volcanic arc, which acted as a buttress and predominantly affected the central and eastern part of the massif.
ISSN: 0278-7407

hal-01115714
https://hal.archives-ouvertes.fr/hal-01115714
DOI : 10.1002/2014TC003618

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Evolution involves interplay between natural selection and developmental constraints(1-3). This is seen, for example, when digits are lost from the limbs during evolution(1,3,4). Extant archosaurs (crocodiles and birds) show several instances of digit loss(3,5,6) under different selective regimes, and show limbs with one, two, three, four or the ancestral number of five digits. The `lost' digits sometimes persist for millions of years as developmental vestiges(7-10). Here we examine digit loss in the Nile crocodile and five birds, using markers of three successive stages of digit development. In two independent lineages under different selection, wing digit I and all its markers disappear. In contrast, hindlimb digit V persists in all species sampled, both as cartilage, and as Sox9-expressing precartilage domains, 250 million years after the adult digit disappeared. There is therefore a mismatch between evolution of the embryonic and adult phenotypes. All limbs, regardless of digit number, showed similar expression of sonic hedgehog (Shh). Even in the one-fingered emu wing, expression of posterior genes Hoxd11 and Hoxd12 was conserved, whereas expression of anterior genes Gli3 and Alx4 was not. We suggest that the persistence of digit V in the embryo may reflect constraints, particularly the conserved posterior gene networks associated with the zone of polarizing activity (ZPA(11)). The more rapid and complete disappearance of digit I may reflect its ZPA-independent specification, and hence, weaker developmental constraints. Interacting with these constraints are selection pressures for limb functions such as flying and perching. This model may help to explain the diverse patterns of digit loss in tetrapods. Our study may also help to understand how selection on adults leads to changes in development.
ISSN: 0028-0836

hal-01545485
https://hal.archives-ouvertes.fr/hal-01545485
DOI : 10.1038/nature12336

Éditeur(s) : HAL CCSD
Résumé : Geological storage of CO2 is one of diverse technologies being explored to reduce atmospheric carbon fromindustrial processes (i.e. fossil fuel combustion). One of the specific features of CO2 injection is the possibility ofgeochemical reactions (dissolution – precipitation) between mobile reactive brine (e.g. formation water enrichedin CO2) and the host rock during the spatial and temporal evolution of CO2. That leads to modifications in thepore structure, which in turn change the flow dynamics of the reservoir (e.g. the permeability k). Then, thesesstructural modifications can largely control the injectivity, so that the pressure field in the reservoir and also theCO2 propagation. Accordingly, it is crucial to explore the changes in the reservoir properties (e.g. structural andhydrodynamic) induced during a CO2 injection and specially the relationships between them (e.g. k or reactivesurface-Sr versus porosity-φ , k versus rock heterogeneity), for developing predictive modelling tools of thetransport and reaction processes occurring during a CO2 injection and reliable risk assessment. In the case ofcarbonate rocks, the application of the predictive models of transport and reaction is still challenging, because oftheir high heterogeneity so that the incertitude in the reaction kinetics of carbonate minerals.From this perspective, we realized brine-enriched in CO2 percolation experiments through carbonate rocksamples in thermodynamic conditions expected during CO2 injection in deep reservoirs (T = 100°C et P =12MPa). The permeability changes k(t) is monitored during the experiments and the porosity variationφ (t) iscalculated from chemical analyses of the sampled outlet fluids, using ICP-EAS. The pore structure modificationsare investigated from high resolution X ray micro tomography images acquired from the synchrotron ofGrenoble (ESRF). Depending to the dissolution regime, controlled by the reservoir rock fabric and the chemicalcomposition of the brine (e.g. PCO2), we observed that a modification of pore structure can either improve(atypical result in dissolution context) or impair the value of the permeability k.
Le stockage géologique du CO2 est l’une des diverses technologies étant explorées afin deréduire les émissions de carbone atmosphérique des processus industriels (i.e. combustion del’énergie fossile). L’une des spécifiques caractéristiques de l’injection du CO2 en profondeurreste la possibilité de réactions géochimiques (dissolution-précipitation) entre la saumureréactive mobile (e.g. eau de formation enrichie en CO2) et la roche encaissante durantl’évolution spatiale et temporelle du CO2, conduisant à des modifications dans la structure despores et par conséquent dans les propriétés d’écoulement du réservoir (e.g. la perméabilité k).Donc, ces changements structuraux peuvent largement contrôler l’injectivité, ainsi que lechamp de pression dans le réservoir et aussi la propagation du CO2. Il demeure ainsi cruciald’explorer les changement dans les propriétés de réservoirs (e.g. structurales ethydrodynamiques) induits durant une injection de CO2 et explicitement les relations existantesentre eux (e.g. k ou surface réactive-Sr versus porosité-φ , k versus hétérogénéité de la roche),afin de développer des outils de modélisation prédictive des processus de transport etréactionnels se produisant durant une injection de CO2 et d’évaluer de façon fiable les risques.Dans le cas des réservoirs carbonatés, l’application des modèles prédictifs de transport réactifdemeure toujours un enjeu, car contrainte par la forte hétérogénéité en leur sein ainsi que parl’incertitude dans la cinétique de réactions des minéraux carbonatés dans ce contexte. Danscette optique, nous avons réalisé des expériences de percolation à travers des échantillons deroches carbonatées dans les conditions thermodynamiques de stockage en profondeur (T =100°C et P =12 MPa). L’évolution de la perméabilité k(t) est suivie au cours desexpériences ; et la variation de la porosité φ (t) est calculée à partir des résultats d’analyseschimiques au ICP-AES des fluides de sortie échantillonnés. L’investigation des modificationsapportées à la structure des pores est réalisée par le biais de la Micro-Tomographie hauterésolution à rayon X, acquise au synchrotron de Grenoble (e.g. ESRF).Dépendant du régime de dissolution, contrôlé par la fabrique de la roche réservoir et lacomposition chimique de la saumuré chargée en CO2 (e.g. PCO2 engagée), on a observéqu’une modification de la structure de la roche peut soit améliorer soit détériorer (résultatatypique en contexte de dissolution) la valeur de la perméabilité k.
https://hal.archives-ouvertes.fr/tel-01142136

tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136/document
https://hal.archives-ouvertes.fr/tel-01142136/file/thesemangane2013.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Homogenization models are widely used to predict the evolution of texture (crystal preferred orientations) and resulting anisotropy of physical properties in metals, rocks, and ice. They fail, however, in predicting two main features of texture evolution in simple shear (the dominant deformation regime on Earth) for highly anisotropic crystals, like olivine: (1) the fast rotation of the CPO towards a stable position characterized by parallelism of the dominant slip system and the macroscopic shear and (2) the asymptotical evolution towards a constant intensity. To better predict CPO-induced anisotropy in the mantle, but limiting computational costs and use of poorly-constrained physical parameters, we modified a viscoplastic self-consistent code to simulate the effects of subgrain rotation recrystallization. To each crystal is associated a finite number of fragments (possible subgrains). Formation of a subgrain corresponds to introduction of a disorientation (relative to the parent) and resetting of the fragment strain and internal energy. The probability of formation of a subgrain is controlled by comparison between the local internal energy and the average value in the polycrystal. A two-level mechanical interaction scheme is applied for simulating the intracrystalline strain heterogeneity allowed by the formation of low-angle grain boundaries. Within a crystal, interactions between subgrains follow a constant stress scheme. The interactions between grains are simulated by a tangent viscoplastic self-consistent approach. This two-level approach better reproduces the evolution of olivine CPO in simple shear in experiments and nature. It also predicts a marked weakening at low shear strains, consistently with experimental data.
ISSN: 0012-821X

hal-01243503
https://hal.archives-ouvertes.fr/hal-01243503
DOI : 10.1016/j.epsl.2015.08.018

Éditeur(s) : HAL CCSD
Résumé : 15 pages
A Stochastic Differential Equation appearing in the statistical theory of turbulence is extended in random environment by assuming that its two parameters are switched by an unobserved continuoustime Markov chain whose states represent the states of the environment. A Dirichlet process is placed as a prior on the space of the sample paths of this chain, leading to a hierarchical Dirichlet model whose estimation is done both on simulated data and on real data of wind speed measured at the entrance of a mangrove ecosystem.
https://hal.archives-ouvertes.fr/hal-00455050

hal-00455050
https://hal.archives-ouvertes.fr/hal-00455050
https://hal.archives-ouvertes.fr/hal-00455050/document
https://hal.archives-ouvertes.fr/hal-00455050/file/CSDA06_Srik_Hal.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Alkali feldspar thermochronologic modeling with the 40Ar/39Ar method has generated marked advances in knowledge of the mechanisms for argon diffusion in feldspars. While the goal in many cases has been to extrapolate the observed and modeled argon behavior in feldspars to natural geological settings, scientific debate surrounding the true feasibility of such extrapolations and indeed, the validity of thermochronologic modeling in itself, have provided much impetus to improve laboratory techniques to test, and increase basic understanding of, argon diffusion. Two cornerstones for the debate over the feasibility of alkali feldspar thermochronology for modeling natural, geologic processes have been: 1. is volume diffusion the main mechanism for argon movement in feldspars? and 2. if volume diffusion is a viable mechanism, does argon then reside in discrete ‘domains' within the feldspar lattice? We describe a study of alkali feldspars from a profile through a well-controlled brittle fault zone in western Norway; the feldspars document argon loss during deformation and strongly suggest the existence of argon ‘domains' within the feldspars, at least during laboratory step heating. The progressive change in the character of argon diffusion is recognizable in the logr/ro diffusion data from the feldspars and is mimicked by physical changes observed optically in the feldspars through progressive degrees of brittle deformation. Modeling results indicate a reduction in size of the biggest domains and the appearance of smaller domains during the strongest stages of deformation. Whether or not this reveals the existence and the transformation of the domain structure in naturo is difficult to prove from our data alone, but interestingly, this behaviour corresponds directly to the physical (optical) appearance of more intense crack networks and subgrains in progressively more brecciated feldspars. Because the thermochronologic histories derived from modeling the feldspar data conform very well to the known tectonic history of the area, the feldspars appear to have successfully retained physical (optical and isotopic) records of episodic tectonic processes operating from ductile through lowtemperature brittle regimes in rocks with a Caledonian history overprinted by several later (younger) geologic events. However, because the ‘cold' brecciation is the last tectonothermal event recorded by these rocks, it is impossible to truly test for the existence of diffusion domains in naturo. Argon loss appears to have been effective only in the most highly brecciated (deformed) samples where the combination of the connected crack network, increased fluid flow and higher temperatures enhanced diffusion via fast diffusion pathways and thus, volume diffusion from the lattice. Only minor argon loss occurred in zones of lower brittle strain, although some development of cracks and brittle features is evident. Independent of the existence of diffusion domains, this study highlights the possible pitfalls when cooling histories are deduced from brecciated feldspars in which age and diffusion charateristics have been decoupled: while the geochronological memory has survived and is identical to that of nonbrecciated feldspars (suggesting no loss and minor effects of deformation), the diffusion characteristics have been completely transposed by brecciation and the appearance of new domains. Modeling feldspars with these latter characteristics would effectively utilise a new feldspar diffusion structure with an ‘old' (relict) age memory.
ISSN: 0016-7037

hal-00198283
https://hal.archives-ouvertes.fr/hal-00198283
https://hal.archives-ouvertes.fr/hal-00198283/document
https://hal.archives-ouvertes.fr/hal-00198283/file/KsparBreccia_Arnaud_Eide_GCA_2000.pdf

Éditeur(s) : Gauthier-Villars
Résumé : Since the advent of plate tectonics the active margins of the oceans have been studied according to a model whose basis is a piling up of imbrications of oceanic material units, in front of the upper plate, forming a great tectonic accretionary prism. This model is broadly the same for all the authors; it has been largely used for alpine-type or paleo-oceanic mountain chain, all around the world. The authors have directly taken part in the drillings on western and eastern Pacific active margins (Legs 60 and 67) and they have worked on the tectonics of alpine (paleo-oceanic) chains of the peri-mediterranean, peri-caribbean, and peripacific belts. They compare the geological data acumulated from these tow direct sources. The tectonic constraints constraints regime is specified and the consequences of the subduction are looked for. The notions of collison and obduction are discussed in relation to subduction and tectonics. Finally, an anlaysis of the temporal evolution of active margins and of chains, shows the necessity of thinking in terms of superimposed tectonics.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1981

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00246/35700/34207.pdf
http://archimer.ifremer.fr/doc/00246/35700/

Éditeur(s) : HAL CCSD International Medical Press
Résumé : International audience
BACKGROUND: Psychiatric disorders are relatively common among HIV-infected patients. However, there are few studies about their potential risk factors. This analysis aimed to measure the incidence of severe psychiatric events (PE) among patients receiving combination antiretroviral therapy (cART) of the French APROCO-COPILOTE (ANRS CO8) cohort, and to identify the medical and socio-behavioural correlates of their first episode of depression, suicide or suicide attempt (D/S/SA). METHODS: APROCO-COPILOTE is a cohort of patients started on a protease inhibitor regimen between 1997 and 1999, with prospective medical standardized records and self-administered questionnaires collecting socio-demographic and socio-behavioural data. This analysis included all 11-year follow-up visits for 1,095 patients having completed baseline self-administered questionnaires. A proportional hazard Cox model was used to identify the correlates of a first D/S/SA event. RESULTS: The overall prevalence of severe PE remained low: 50 patients experienced 67 events (incidence rate [95% CI] =1.04 [0.82, 1.32] per 100 person-years). Depression (n=16), suicides (n=5) and suicide attempts (n=14) were the most frequently diagnosed PE (0.54 [0.39, 0.76] per 100 person-years) among 25 patients. Multivariate results showed that unemployment, unstable housing, detectable viral load and smoking more than 20 cigarettes/day were independently associated with D/S/SA. CONCLUSIONS: Although the incidence of severe PE remained relatively low among the patients of APROCO-COPILOTE cohort, this study's results underline a clinically important problem in HIV-infected patients receiving cART. Furthermore, our findings not only emphasize the importance of comprehensive care, especially for socially vulnerable patients, but may also help future studies designed to assess the effectiveness of interventions in reducing the risk of PE during cART.
ISSN: 1359-6535

hal-00875183
https://hal.archives-ouvertes.fr/hal-00875183
DOI : 10.3851/IMP2102
PUBMED : 22544079

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tropical islands are characterized by thermal and orographical forcings which may generate microscale air mass circulations. The Lesser Antilles Arc includes small tropical islands (width lower than 50 km) where a total of one-and-a-half million people live. Air quality over this region is affected by anthropogenic and volcanic emissions, or saharan dust. To reduce risks for the population health, the atmospheric dispersion of emitted pollutants must be predicted. In this study, the dispersion of anthropogenic nitrogen oxides (NOx) is numerically modelled over the densely populated area of the Guadeloupe archipelago under weak trade winds, during a typical case of severe pollution. The main goal is to analyze how microscale resolutions affect air pollution in a small tropical island. Three resolutions of domain grid are selected: 1 km, 333 m and 111 m. The Weather Research and Forecasting model (WRF) is used to produce real nested microscale meteorological fields. Then the weather outputs initialize the Lagrangian Particle Dispersion Model (FLEXPART). The forward simulations of a power plant plume showed good ability to reproduce nocturnal peaks recorded by an urban air quality station. The increase in resolution resulted in an improvement of model sensitivity. The nesting to subkilometer grids helped to reduce an overestimation bias mainly because the LES domains better simulate the turbulent motions governing nocturnal flows. For peaks observed at two air quality stations, the backward sensitivity outputs identified realistic sources of NOx in the area. The increase in resolution produced a sharper inverse plume with a more accurate source area. This study showed the first application of the FLEXPART-WRF model to microscale resolutions. Overall, the coupling model WRF-LES-FLEXPART is useful to simulate the pollutant dispersion during a real case of calm wind regime over a complex terrain area. The forward and backward simulation results showed clearly that the subkilometer resolution of 333 m is necessary to reproduce realistic air pollution patterns in this case of short-range transport over a complex terrain area. Globally, this work contributes to enrich the sparsely documented domain of real nested microscale air pollution modelling. This study dealing with the determination of the proper resolution grid and proper turbulence scheme, is of significant interest to the near-source and complex terrain air quality research community.
ISSN: 1352-2310

hal-01349208
https://hal.archives-ouvertes.fr/hal-01349208
DOI : 10.1016/j.atmosenv.2016.05.028

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The analysis of three cataclastic band sets from Provence (France) reveals that the band density, their conjugate angles, their ratio of shear displacement to compaction, and the amount of cataclasis within the bands differ and can be expressed as functions of tectonic setting and petrophysical properties. We identify (1) a dense and closely spaced network of shear-enhanced (reverse) compaction bands; (2) a regularly spaced less dense network of reverse compactional shear bands; and (3) a localized network of normal shear bands. The field data show that strain localization is favored in an extensional regime and is characterized by shear bands with a large shear to compaction ratio and a small conjugate band angle. In contrast, distributed strain is favored in a contractional regime and is characterized by compactional bands with a low ratio of shear to compaction and a large conjugate band angle. To explain the mechanical origin of this strain localization, we quantify the yield strength and the stress evolution in extensional and contractional regimes in a frictional porous granular material. We propose a model of strain localization in porous sands as a function of tectonic stresses, burial depth, material properties, strain hardening and fluid pressure. Our model suggests that stress reduction, inherent to extensional regime, favors strain localization as shear bands, whereas stress increase during contraction favors development of compactional bands.
ISSN: 0191-8141

hal-00856921
https://hal.archives-ouvertes.fr/hal-00856921
DOI : 10.1016/j.jsg.2012.11.011

Éditeur(s) : HAL CCSD
Résumé : Today, one of the main challenges in the oil industry is the exploitation of new resources in naturally fractured reservoirs often located in structurally complex areas such as plate boundaries, mountain ranges or near salt structures. While numerical models of rock deformation based on continuum mechanics are becoming industry standard in providing efficient means for modelling natural fractures in reservoirs, the knowledge of past perturbed stress fields, which is referred as the type (normal, wrench or reverse), orientation and magnitude of the regional or local tectonic stresses that needs to be applied as boundary condition in numerical simulations, is often unknown or approximated.The essence of this thesis is to improve the recovery of the paleostress field needed to constrain numerical simulations. I first described and discuss through a comprehensive mechanically-based multi-parametric study how far we can rely on the commonly used paleostress inversion methods based on fault slip data and the Wallace and Bott assumptions. I then compared this method with a new generation technique based on geomechanics using field observations. Since slip markers on faults are hardly observed in core or image log, I used observed natural fracture data as main drivers for the inversion of the paleostress using geomechanically-based method. I demonstrated, through various outcrop and subsurface examples, how this can efficiently be done. Finally, I aimed at addressing the problem of polyphase fracture data sets with unknown mechanical type (joints, faults, stylolites ...) and expanded the mechanical stress inversion to the separation of tectonic phases.
Aujourd'hui, l'un des principaux défis dans l'industrie pétrolière est l'exploitation de nouvelles ressources dans les réservoirs naturellement fracturés souvent situés dans des zones structurellement complexes tels que les frontières de plaques, les chaînes de montagnes ou les structures de proches des dômes de sel. Alors que les modèles numériques de déformation des roches basée sur la mécanique des milieux continus fournissant des moyens efficaces pour la modélisation de fractures naturelles dans les réservoirs, sont devenus la norme dans l'industrie, les paléo-contraintes régionales ou locales appliquées comme condition aux limites dans les simulations numériques, définies par le régime (normal, décrochant ou inverse), l'orientation, et la magnitude des contraintes tectoniques, sont souvent inconnues ou approximées.L'essence de cette thèse est d'améliorer la prédiction du champ de paléo-contrainte nécessaire pour contraindre les simulations numériques. J’ai décrit dans un premier temps à travers une étude comparative multi-paramétrique complète basée sur la mécanique, dans quelle mesure nous pouvions compter sur les méthodes d'inversion des paléo-contraintes basées sur les hypothèses de Wallace et Bott et les données de glissement sur les failles. J’ai ensuite comparé ces méthodes avec une technique d’inversion de nouvelle génération basée sur la géomécanique en utilisant les observations de terrain. Puisque les marqueurs de glissement sur les failles sont rarement observés le long du forage, j’ai utilisé l’inversion géomécanique des contraintes pour les données de fractures naturelles observées. J’ai alors démontré, l’efficacité de cette technique à travers divers exemples d'affleurements et de subsurface. Enfin, j’ai proposé une solution afin de résoudre le problème des données de fractures polyphasées à type cinématique inconnu (joints, failles, stylolites ...) et étendu l’inversion de contrainte basée sur la géomécanique à la séparation des phases tectoniques.
https://hal.archives-ouvertes.fr/tel-01324110

tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110/document
https://hal.archives-ouvertes.fr/tel-01324110/file/theselejri.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Lithospheric-scale faults related to oblique subduction are responsible for some of the most hazardous earthquakes reported worldwide. The mega-thrust in the Sunda sector of the Sumatran oblique subduction has been intensively studied, especially after the infamous 2004 Mw 9.1 earthquake, but its onshore kinematic complement within the Sumatran subduction, the transform Sumatran Fault System, has received considerably less attention. In this paper, we apply a combination of analysis of Digital Elevation Models (ASTER GDEM) and field evidence to resolve the kinematics of the leading edge of deformation of the northern sector of the Sumatran Fault System. To this end, we mapped the northernmost tip of Sumatra, including the islands to the northwest, between 4.5°N and 6°N. Here, major topographic highs are related to different faults. Using field evidence and our GDEM structural mapping, we can show that in the area where the fault bifurcates into two fault strands, two independent kinematic regimes evolve, both consistent with the large-scale framework of the Sumatran Fault System. Whereas the eastern branch is a classic Riedel system, the western branch features a fold-and-thrust belt. The latter contractional feature accommodated significant amounts (c. 20%) of shortening of the system in the study area. Our field observations of the tip of the NSFS match a strain pattern with a western contractional domain (Pulau Weh thrust splay) and an eastern extensional domain (Pulau Aceh Riedel system), which are together characteristic of the tip of a propagating strike-slip fault, from a mechanical viewpoint. For the first time, we describe the strain partitioning resulting from the propagation of the NSFS in Sumatra mainland. Our study helps understanding complex kinematics of an evolving strike-slip system, and stresses the importance of field studies in addition to remote sensing and geophysical studies.
ISSN: 0040-1951

hal-01467196
https://hal.archives-ouvertes.fr/hal-01467196
DOI : 10.1016/j.tecto.2016.04.050