Éditeur(s) : United Nations United Nations ( Geneva )
Résumé : (System Details) Master and use copy. Digital master created according to Benchmark for Faithful Digital Reproductions of Monographs and Serials, Version 1. Digital Library Federation, December 2002.
(Statement of Responsibility) United Nations Conference on the Least Developed Countries.
"UNCLDC II/CP.3."
Second United Nations Conference to be held in September 1990 in Paris.
"Description of the current situation in Haiti and the development strategy for the period 1990-1999, Ministry of Planning and External Co-operation"--P. iii.
"English and French only."
Haiti
Haïti
Haiti
Haiti
Haïti
Haïti

622773030

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study presents microstructural evidence for deformation-controlled melt organization and for changes in olivine deformation associated with the presence of melt in an 80 m vertical section of the crust-mantle transition zone in the Oman ophiolite. This zone represents an 'end member' case for analyzing feedbacks between deformation and melt distribution in the upper mantle, since it experienced strong shear strains in presence of large melt fractions. It is characterized by a subhorizontal compositional layering at the mm to meter scale, from weakly impregnated dunites to olivine-rich gabbros, which parallels a pervasive foliation containing a strong stretching lineation. The parallelism between the compositional layering and the foliation, the diffuse limits of the layers, the alignment of elongated plagioclase-rich aggregates devoid of internal deformation structures with the elongation of olivine crystals in the dunitic layers, and the sharp compositional changes across some, but not all layer limits suggest deformation plays an essential role on the development of the layering. The variation on a mm-scale of the olivine crystal preferred orientation (CPO) symmetry as a function of the modal content: from axial-[100] symmetry in layers with <70% modal olivine to axial-[010] in more gabbroic levels (<40% olivine), which is repeated over the entire section, implies deformation in presence of variable melt fractions. Axial-[100] olivine CPO in olivine-rich layers is consistent with deformation by dislocation creep under high temperature, low pressure, dry conditions. Axial-[010] olivine CPO patterns imply additional sliding along preferentially wetted (010) grain boundaries, increase in the activity of [001] glide, or transpression localized in the melt-rich layers. Since the change in CPO symmetry is not accompanied by dispersion, instantaneous melt fractions must have remained <30-40% in all layers. The continuous variation in olivine CPO symmetry with decreasing olivine content implies therefore that the former depends on the cumulated strain in presence of melt rather than on the instantaneous melt fraction.
ISSN: 0012-821X

hal-00795508
https://hal.archives-ouvertes.fr/hal-00795508
DOI : 10.1016/j.epsl.2012.10.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : Folds with hinge lines subparallel to stretching lineation are common features in shear zones and represent extreme cases of fold modification. However, their microstructures and in particular their kinematic significance remain poorly understood. Here we describe the meso- and micro-scale structures and crystallographic preferred orientation (CPO) of quartz and muscovite from a metric-scale shear-modified fold from Plattjen, Saas Fee, Western Internal Alps. The studied fold is of class-2 and the samples collected around the fold have essentially the same microstructures. Quartz [c]-axes plotted in the tectonic coordinate system exhibit an apparent reverse obliquity on opposing limbs. Muscovite fabrics are controlled essentially by the orientation of {001} planes. If the CPO data are plotted in a common reference frame (e.g. either fold or geographical), all samples exhibit essentially the same patterns for both minerals. In particular, relative to the fold axis and axial surface, the reversal of quartz CPO obliquity on opposing limbs is no longer evident. The small obliquity (~ 15°) between the intersection lineation of the two planes of {001} of muscovite and the fold axis results in the apparent reversal of shear sense on opposite limbs when viewing the CPO related to the macroscopic fabric. The homogeneity of the microstructures and CPOs of quartz and muscovite across the fold support the interpretation that the fold developed during simultaneous activation of heterogeneous and homogeneous simple shear, with the former responsible for fold development and the latter responsible for fold rotation and the overwhelming of the heterogeneous deformation. These processes led to the observed parallelism between fold hinge line and local stretching lineation.
ISSN: 0040-1951

hal-00824537
https://hal.archives-ouvertes.fr/hal-00824537
DOI : 10.1016/j.tecto.2011.03.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Homogenization models are widely used to predict the evolution of texture (crystal preferred orientations) and resulting anisotropy of physical properties in metals, rocks, and ice. They fail, however, in predicting two main features of texture evolution in simple shear (the dominant deformation regime on Earth) for highly anisotropic crystals, like olivine: (1) the fast rotation of the CPO towards a stable position characterized by parallelism of the dominant slip system and the macroscopic shear and (2) the asymptotical evolution towards a constant intensity. To better predict CPO-induced anisotropy in the mantle, but limiting computational costs and use of poorly-constrained physical parameters, we modified a viscoplastic self-consistent code to simulate the effects of subgrain rotation recrystallization. To each crystal is associated a finite number of fragments (possible subgrains). Formation of a subgrain corresponds to introduction of a disorientation (relative to the parent) and resetting of the fragment strain and internal energy. The probability of formation of a subgrain is controlled by comparison between the local internal energy and the average value in the polycrystal. A two-level mechanical interaction scheme is applied for simulating the intracrystalline strain heterogeneity allowed by the formation of low-angle grain boundaries. Within a crystal, interactions between subgrains follow a constant stress scheme. The interactions between grains are simulated by a tangent viscoplastic self-consistent approach. This two-level approach better reproduces the evolution of olivine CPO in simple shear in experiments and nature. It also predicts a marked weakening at low shear strains, consistently with experimental data.
ISSN: 0012-821X

hal-01243503
https://hal.archives-ouvertes.fr/hal-01243503
DOI : 10.1016/j.epsl.2015.08.018

Éditeur(s) : HAL CCSD
Résumé : This thesis compiles two distinct studies that both document the control of microstructures on rock seismic properties. The first part deals with the development of crystallographic preferred orientations (CPO) in the uppermost mantle associated with melt/fluid-rock interactions, recorded in peridotites xenoliths from the Japan sea back-arc basin. The microstructural and geochemical characteristics of the studied samples reveal that active spreading is associated to uppermost mantle deformation similar to that observed in the Oman ophiolite. At the onset of back-arc spreading, there are no strong interactions between melt percolation and deformation in comparison to continental rift zones, probably due to the relatively small size and short duration of the spreading event. The second part presents a unique database of plagioclase CPO from variously deformed mafic rocks. CPO are grouped in three main types; their characteristics as a function of deformation regime (magmatic or crystal-plastic) are outlined and discussed. Calculated seismic properties of gabbroic rocks show that anisotropy tends to increase as a function of fabric strength, although it is generally weak, due to the competing effect of olivine/clinopyroxene and plagioclase.
Cette thèse regroupe deux études distinctes, qui documentent le contrôle des microstructures sur les propriétés sismiques des roches. La première partie traite du développement des orientations préférentielles cristallographiques (OPC) dans le manteau supérieur, associé aux interactions liquide/magma-roche, enregistré dans des xénolites de péridotites du bassin d'arrière-arc de la mer du Japon. Les caractéristiques microstucturales et géochimiques des échantillons étudiés montrent que l'ouverture arrière-arc active est associée à une déformation du manteau supérieure similaire à celle observée dans l'ophiolite d'Oman. L'initiation de l'extension d'arrière-arc n'est pas associée à de fortes interactions entre percolation magmatique et déformation, en comparaison avec les zones de rifting continentales, probablement en raison des taille et durée relativement petites de l'épisode d'ouverture. La seconde partie présente une base de données unique d'OPC de plagioclase de roches mafiques plus ou moins déformées. Les OPC sont classées en 3 types principaux; leurs caractéristiques en fonction du régime de déformation (magmatique ou plastique) sont présentées et discutées. Les propriétés sismiques calculées des roches gabbroiques montrent que l'anisotropie tend à croitre avec l'intensité des fabriques, bien qu'elle soit généralement faible, en raison des effets opposés des olivines/clinopyroxènes et du plagioclase.
https://tel.archives-ouvertes.fr/tel-00795505

tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505/document
https://tel.archives-ouvertes.fr/tel-00795505/file/Satsukawa_thesis_UM2.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The mantle above a subducting slab is the site of complex interactions between deformation, partial melting, fluid migration and magma transport. To constrain these interactions and their effects on olivine deformation, we analyze microstructures, crystal preferred orientations, and water contents of peridotite xenoliths entrained by andesites of the Avacha volcano, southern Kamchatka arc. These xenoliths are refractory spinel harzburgites that have coarse-grained microstructures with widely spaced subgrain boundaries and sinuous grain boundaries in olivine, consistent with deformation by dislocation creep under low deviatoric stress (< 13 MPa) and with a significant contribution from diffusional processes. Analysis of crystal preferred orientations (CPO) indicates dominant activation of high-temperature, low-stress {0kl}[100] slip systems in olivine and of(100)[001] in orthopyroxene. In most samples, coarse opx crystals, elongated parallel to the lineation, enclose small olivine grains in crystallographic continuity with neighbouring crystals, indicating crystallization of orthopyroxene at the expense of olivine as a result of reactive percolation of Si-rich fluids coeval with the high-temperature deformation. Secondary crystallization of interstitial orthopyroxene led locally to development of opx-rich lenses parallel to the foliation, characterized by a decrease in olivine grain size and dispersion of the olivine CPO without changing the dominant slip systems. Half of the samples also show acicular orthopyroxene aggregates with which is associated a fine-grained matrix composed of rounded strain-free olivine, orthopyroxene, spinel, and rare amphibole crystals. This matrix occurs pervasively along grain boundaries or forms millimeter-scale irregular lenses and anastomosing veinlets that crosscut the coarse crystals and their ductile deformation structures. Both acicular orthopyroxene and the fine-grained matrix are interpreted as resulting from reactive transport of H2O-rich fluids under static conditions, probably in the lithospheric mantle. Infrared analyses show that olivine contains 1-8 center dot 6 ppm by weight of water. These low water contents are similar to those observed in spinel peridotites from other subduction zones and probably record both the low solubility of water in olivine at low pressure and dehydration during exhumation of the xenoliths. Water contents in orthopyroxene are highly variable (25-506 ppm H2O), probably recording spatially heterogeneous interaction with fluids or melts and compositional disequilibrium in the studied samples. Change in the dominant percolation mechanism from porous flow to fracturing suggests cooling, consistent with the low temperatures estimated from pyroxene thermometry (< 800-900 degrees C). The Avacha xenoliths therefore record pervasive deformation of a region of the mantle under asthenospheric conditions, followed by its accretion to the base of the lithosphere, probably as a result of cooling of the mantle wedge. Percolation of Si-rich fluids or hydrous melts is recorded at all stages; this probably enhanced diffusion and lowered deviatoric stresses during ductile deformation, but did not change the dominant slip direction in olivine from [100] to [001].
ISSN: 0022-3530

hal-00456053
https://hal.archives-ouvertes.fr/hal-00456053
DOI : 10.1093/petrology/egp085

Éditeur(s) : HAL CCSD
Résumé : International audience
Fish is a rich source of essential nutrients for fetal development, but in contrast, it is also a well-known route of exposure to environmental pollutants. We assessed whether fish intake during pregnancy is associated with fetal growth and the length of gestation in a panel of European birth cohort studies. The study sample of 151,880 mother-child pairs was derived from 19 population-based European birth cohort studies. Individual data from cohorts were pooled and harmonized. Adjusted cohort-specific effect estimates were combined by using a random- and fixed-effects meta-analysis. Women who ate fish >1 time/wk during pregnancy had lower risk of preterm birth than did women who rarely ate fish (≤ 1 time/wk); the adjusted RR of fish intake >1 but <3 times/wk was 0.87 (95% CI: 0.82, 0.92), and for intake ≥ 3 times/wk, the adjusted RR was 0.89 (95% CI: 0.84, 0.96). Women with a higher intake of fish during pregnancy gave birth to neonates with a higher birth weight by 8.9 g (95% CI: 3.3, 14.6 g) for >1 but <3 times/wk and 15.2 g (95% CI: 8.9, 21.5 g) for ≥ 3 times/wk independent of gestational age. The association was greater in smokers and in overweight or obese women. Findings were consistent across cohorts. This large, international study indicates that moderate fish intake during pregnancy is associated with lower risk of preterm birth and a small but significant increase in birth weight.
The American Journal of Clinical Nutrition

hal-01118513
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01118513
PUBMED : 24335057
DOI : 10.3945/ajcn.113.067421

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We have inferred the deformation mechanisms of antigorite by high-resolution EBSD mapping of samples from Cerro del Almirez ultramafic massif (Betic Cordillera, SE Spain). Textural relations and phase diagram calculations constrain the foliation development conditions to the subduction prograde path at up to 600-630 °C and 1.6-1.9 GPa. Deformation was followed by static annealing of antigorite at ca. 680 °C. The Crystal Preferred Orientation (CPO) of antigorite is characterised by a strong alignment of (001) poles normal to the foliation plane and a weaker, but clear, parallelism between [100] axes and the macroscopic lineation defined by the elongation of magnetite aggregates. Analysis of misorientations across subgrains shows predominance of [010] rotation axis, consistent with activation of the [100](001) slip system. However, tilt subgrain boundaries subparallel to (100), probably formed by edge dislocations of this system, are subsidiary. Most subgrain boundaries are subparallel to (001) planes. They are interpreted as (001) twins wherein continuing viscoplastic deformation resulted in a slight increase of the misorientation between the twins. Modelling of the evolution of the antigorite CPO using a lower bound approach and considering different deformation regimes and sets of basal and non-basal slip systems has shown that intensities of [100] and [010] maxima reflect the relative strength of the antigorite [100](001) and [010](001) systems. Activation of other basal or non-basal slip systems does not change significantly the CPO patterns, but results in less concentrated CPO. 3D transpression models better reproduce the CPO of natural antigorite serpentinites. We propose that the widespread occurrence of strong CPO in high-pressure antigorite serpentinite is consistent with deformation by dislocation creep with dominant glide on [hk0](001), together with the activation of twinning, implying that a power law rheology would better account for the mechanical behaviour of antigorite serpentinite deep in the subduction channel and mantle wedge.
ISSN: 0012-821X

hal-00795511
https://hal.archives-ouvertes.fr/hal-00795511
DOI : 10.1016/j.epsl.2012.06.049

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : We have applied transmission electron microscopy (TEM) analyses coupled with viscoplastic self-consistent (VPSC) numerical modelling to identify the active slip systems and to better understand the crystal preferred orientation (CPO) development of the Torridon quartz mylonite (NW Scotland). TEM analyses showed evidence of activation of 1/3〈a〉{π′}, 1/3〈a〉{z} and possible 〈a〉(c) slip systems, as well as dislocation climb and dynamic recrystallization. All the CPOs generated by VPSC models share common characteristics with the Torridon quartz mylonite, but only Models 2 and 3 reproduce the [c]-axes maxima at low angle (<20°) to the foliation pole along the YZ plane, as observed in the mylonite. In Model 2, this concentration only occurs at γ≥2.6, whereas in Model 3 this maxima occurs at lower shear strains. The models that start with a previous preferred orientation acquire very strong CPOs after small-imposed strains, followed by the rapid rotation of the fabric in relation to the new imposed finite strain axes. The combined activation of 〈a〉{π′}, 〈a〉{z} and possibly 〈a〉(c) slip systems, as demonstrated by TEM analyses, suggests that the VPSC model that best predicts CPO development in the Torridon quartz mylonite is Model 2, where the critical resolved shear stress (CRSS) of 〈a〉{π/π′} is assumed to be slightly stronger than 〈a〉(c).
Deformation Mechanisms, Rheology and Tectonics: Microstructures, Mechanics and Anisotropy

hal-00688840
https://hal.archives-ouvertes.fr/hal-00688840

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A series of two-stage torsion experiments on Carrara marble were conducted to constrain the influence of known prior deformation on rheological response and microstructural evolution. Comparison with previous experimental data on Carrara marble flow and fabric evolution during single-stage torsion deformation experiments provided direct insights into the significance of initial deformation at various conditions. Our experiments were conducted at 727 degrees C temperature and 300 MPa confining pressure, while maintaining a constant strain rate of 3 x 10(-4) s(-1) on the periphery of the cylindrical samples. Under these conditions, the marble is known to deform in power-law (n = 6-10) ductile flow. All torsion experiments were performed with a Paterson type gas-medium testing machine equipped with a torsion actuator module.;Prior (D1) and subsequent (D2) deformation are accomplished by two torsion experiments in sequence on same sample segments. The effect of D1 strain history is investigated during D2 by applying counter-clockwise torsion to a sandwich sample consisting of three segments with different D1 rotation sense. D2 samples experienced continued, first and reversed shearing deformation in top, centre and bottom segments, respectively. D2 bulk strain was chosen equal to D1 strain in top and bottom segments.;D1 experiments followed the typical single-stage deformation behaviour of Carrara marble under the applied experimental conditions. Yielding was followed by strain hardening until a peak stress was reached at a shear strain around 1, after which work softening occurred. Weakening gradually evolved into a constant stress regime. During hardening, a shear microstructure and crystallographic preferred orientation (CPO) developed. Afterwards the volume fraction of smaller dynamic recrystallised grains increased continuously, resulting in a recrystallisation microstructure and CPO at shear strains of 5 and higher. The new D2 experiments displayed a strain variation between homogeneously deformed sample segments that increased with increasing D1 strain. The stress-strain behaviour of the D2 bulk sandwich samples showed less pronounced work-hardening and -softening when compared with single-stage deformation experiments. Furthermore, constant flow stress was attained at increasingly lower strain with increasing D1 strain. In most D2 segments, fabric development is equivalent to single-stage experiments at corresponding absolute strain. The fabrics differed markedly from those in single-stage experiments in the case of reversed two-stage deformation at moderate strain (D1 shear strain 1 and 2.6). Experiments show that grain shape by shearing of relict grains is defined by finite strain and thus affected by strain reversal. Recrystallisation is controlled by absolute strain and not influenced by strain reversal.
ISSN: 0040-1951

hal-00617686
https://hal.archives-ouvertes.fr/hal-00617686
DOI : 10.1016/j.tecto.2010.09.029

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Microstructures and crystallographic preferred orientation (CPO) of anorthosite samples interlayered in the upper and lower gabbro sections in the Oman ophiolite were analyzed in this paper. In the anorthosites registering the dynamics of the melt lenses, foliation is flat lying and starts to develop a few meters below the root zone of the sheeted dike complex (RZSDC). Microstructures and CPO of these rocks were developed in response to four different mechanisms: (1) density-controlled settling of plagioclase on the lens floor, (2) deposition of anorthosites related to convection currents, (3) melt compaction, and (4) uncompacted melt accumulation. In these anorthosites, the poles to (010) of plagioclase are parallel to the flow plane of convection, whereas the [100] axes and poles to (001) express the convection flow direction and the axis of convection rolls, respectively. The effect of subsidence of melt lens floor is recorded immediately below the RZSDC and is characterized by the rapid (but progressive) development of dipping foliation and lineation, reflecting the increase of deformation downsection. The degree of foliation and CPO development in the anorthosites is directly related to the distance of the center of the melt lenses before the subsidence starts. Despite the uncertain origin of the anorthosites from the lower gabbro section, all the samples lost the magmatic microstructural characteristics and presently are reequilibrated aggregates. However, they still preserve plagioclase CPO, where some of these patterns present similarities with the anorthosites from the upper gabbro section, but no evidence of intracrystalline deformation under high temperatures.
ISSN: 0278-7407

hal-00617446
https://hal.archives-ouvertes.fr/hal-00617446
DOI : 10.1029/2010TC002697

Éditeur(s) : HAL CCSD National Institute of Environmental Health Sciences
Résumé : International audience
BACKGROUND: Women of reproductive age can be exposed to endocrine-disrupting chemicals (EDCs) at work, and exposure to EDCs in pregnancy may affect fetal growth. OBJECTIVES: We assessed whether maternal occupational exposure to EDCs during pregnancy as classified by application of a job exposure matrix was associated with birth weight, term low birth weight (LBW), length of gestation, and preterm delivery. METHODS: Using individual participant data from 133,957 mother-child pairs in 13 European cohorts spanning births from 1994 through 2011, we linked maternal job titles with exposure to 10 EDC groups as assessed through a job exposure matrix. For each group, we combined the two levels of exposure categories (possible and probable) and compared birth outcomes with the unexposed group (exposure unlikely). We performed meta-analyses of cohort-specific estimates. RESULTS: Eleven percent of pregnant women were classified as exposed to EDCs at work during pregnancy, based on job title. Classification of exposure to one or more EDC group was associated with an increased risk of term LBW [odds ratio (OR) = 1.25; 95% CI: 1.04, 1.49], as were most specific EDC groups; this association was consistent across cohorts. Further, the risk increased with increasing number of EDC groups (OR = 2.11; 95% CI: 1.10, 4.06 for exposure to four or more EDC groups). There were few associations (p < 0.05) with the other outcomes; women holding job titles classified as exposed to bisphenol A or brominated flame retardants were at higher risk for longer length of gestation. CONCLUSION: Results from our large population-based birth cohort design indicate that employment during pregnancy in occupations classified as possibly or probably exposed to EDCs was associated with an increased risk of term LBW.
ISSN: 0091-6765

hal-01405823
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01405823
DOI : 10.1289/EHP208
PUBMED : 27152464

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Alkali feldspar thermochronologic modeling with the 40Ar/39Ar method has generated marked advances in knowledge of the mechanisms for argon diffusion in feldspars. While the goal in many cases has been to extrapolate the observed and modeled argon behavior in feldspars to natural geological settings, scientific debate surrounding the true feasibility of such extrapolations and indeed, the validity of thermochronologic modeling in itself, have provided much impetus to improve laboratory techniques to test, and increase basic understanding of, argon diffusion. Two cornerstones for the debate over the feasibility of alkali feldspar thermochronology for modeling natural, geologic processes have been: 1. is volume diffusion the main mechanism for argon movement in feldspars? and 2. if volume diffusion is a viable mechanism, does argon then reside in discrete ‘domains' within the feldspar lattice? We describe a study of alkali feldspars from a profile through a well-controlled brittle fault zone in western Norway; the feldspars document argon loss during deformation and strongly suggest the existence of argon ‘domains' within the feldspars, at least during laboratory step heating. The progressive change in the character of argon diffusion is recognizable in the logr/ro diffusion data from the feldspars and is mimicked by physical changes observed optically in the feldspars through progressive degrees of brittle deformation. Modeling results indicate a reduction in size of the biggest domains and the appearance of smaller domains during the strongest stages of deformation. Whether or not this reveals the existence and the transformation of the domain structure in naturo is difficult to prove from our data alone, but interestingly, this behaviour corresponds directly to the physical (optical) appearance of more intense crack networks and subgrains in progressively more brecciated feldspars. Because the thermochronologic histories derived from modeling the feldspar data conform very well to the known tectonic history of the area, the feldspars appear to have successfully retained physical (optical and isotopic) records of episodic tectonic processes operating from ductile through lowtemperature brittle regimes in rocks with a Caledonian history overprinted by several later (younger) geologic events. However, because the ‘cold' brecciation is the last tectonothermal event recorded by these rocks, it is impossible to truly test for the existence of diffusion domains in naturo. Argon loss appears to have been effective only in the most highly brecciated (deformed) samples where the combination of the connected crack network, increased fluid flow and higher temperatures enhanced diffusion via fast diffusion pathways and thus, volume diffusion from the lattice. Only minor argon loss occurred in zones of lower brittle strain, although some development of cracks and brittle features is evident. Independent of the existence of diffusion domains, this study highlights the possible pitfalls when cooling histories are deduced from brecciated feldspars in which age and diffusion charateristics have been decoupled: while the geochronological memory has survived and is identical to that of nonbrecciated feldspars (suggesting no loss and minor effects of deformation), the diffusion characteristics have been completely transposed by brecciation and the appearance of new domains. Modeling feldspars with these latter characteristics would effectively utilise a new feldspar diffusion structure with an ‘old' (relict) age memory.
ISSN: 0016-7037

hal-00198283
https://hal.archives-ouvertes.fr/hal-00198283
https://hal.archives-ouvertes.fr/hal-00198283/document
https://hal.archives-ouvertes.fr/hal-00198283/file/KsparBreccia_Arnaud_Eide_GCA_2000.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Quartz is a common crustal mineral that deforms plastically in a wide range of temperatures and pressures, leading to the development of different types of crystallographic preferred orientation (CPO) patterns. In this contribution we present the results of an extensive modeling of quartz fabric transitions via a viscoplastic self-consistent (VPSC) approach. For that, we have performed systematic simulations using different sets of relative critical resolved shear stress of the main quartz slip systems. We have performed these simulations in axial compression and simple shear regimes under constant Von Mises equivalent strain of 100% (γ = 1.73), assuming that the aggregates deformed exclusively by dislocation glide. Some of the predicted CPOs patterns are similar to those observed in naturally and experimentally deformed quartz. Nevertheless, some classical CPO patterns usually interpreted as result from dislocation glide (e.g. Y-maxima due to prism < a > slip) are clearly not developed in the simulated conditions. In addition we reported new potential preferred orientation patterns that might happen in high temperature conditions, both in axial compression and simple shear. We have demonstrated that CPOs generated under axial compression are usually stronger that those predicted under simple shear, due to the continuous rotation observed in the later simulations. The fabric strength depends essentially on the dominant active slip system, and normally the stronger CPOs result from dominant basal slip in < a >, followed by rhomb < a > and prism [c] slip, whereas prism < a > slip does not produce strong fabrics. The opening angle of quartz [0001] fabric used as a proxy of temperature seems to be reliable for deformation temperatures of ~ 400 °C, when the main slip systems have similar behaviors.
ISSN: 0040-1951

hal-01115674
https://hal.archives-ouvertes.fr/hal-01115674
DOI : 10.1016/j.tecto.2014.08.011

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Analysis of the microstructures in the km-scale mantle shear zone that separates the northern and the central parts of the Lanzo peridotite massif provides evidence of an evolution in time and space of deformation processes accommodating shearing in the shallow mantle within an extensional setting. This shear zone displays an asymmetric distribution of deformation facies. From south to north, gradual reorientation of the foliation of coarse porphyroclastic plagioclase-bearing peridotites is followed by development of protomylonites, mylonites, and mm-scale ultramylonite bands. A sharp grain size gradient marks the northern boundary. Early deformation under near-solidus conditions in the south is recorded by preservation of weakly deformed interstitial plagioclase and almost random clinopyroxene and plagioclase crystal orientations. Feedback between deformation and melt transport probably led to melt focusing and strain weakening in the shear zone. Overprint of melt-rock reaction microstructures by solid-state deformation and decrease in recrystallized grain size in the protomylonites and mylonites indicate continued deformation under decreasing temperature. Less enriched peridotite compositions and absence of ultramafic dykes or widespread melt-impregnation microstructures north of the shear zone and clinopyroxene and amphibole enrichment in the mylonites and ultramylonites suggest that the shear zone acted as both a thermal barrier and a high-permeability channel for late crystallizing fluids. These observations, together with chemical data indicating faster cooling of central Lanzo relative to the northern body, corroborate that this shear zone is a mantle detachment fault. All deformation facies have crystal preferred orientations consistent with deformation by dislocation creep with dominant activation of the (010)[100] and (100)[001] systems in olivine and orthopyroxene, respectively. Dynamic recrystallization produces dispersion of olivine CPO but not a change of dominant deformation mechanism. Evidence for activation of grain boundary sliding is limited to mm-scale ultramylonite bands, where solid-state reactions produced very fine grained polymineralic aggregates. Except for these latest stages of deformation, strain localization does not result from the microstructural evolution; the grain size decrease is a consequence of the need to deform a rock volume whose strength continuously increases because of decreasing temperature conditions. Strain localization in the intermediate levels thus essentially results from the more localizing behavior of both the deep, partially molten, and shallow parts of this extensional shear zone distribution.
ISSN: 1525-2027

hal-00644844
https://hal.archives-ouvertes.fr/hal-00644844
DOI : 10.1029/2011GC003627