Éditeur(s) : HAL CCSD
Résumé : To study the dynamics of an orogen-foreland system and more particularly the impact of surface processes on its development, we base our work on two main axes. In a first part, using analogue tapered wedge models, we investigate the interplay between tectonics, erosion and sedimentation during the orogenic growth. The basis model mimics the evolution of a wedge section extending from the orogen to its foreland basin, with both the structural and the lithological heritages simulated. In a second part, the focus is on the recent tectonic and geomorphologic processes affecting the Swiss Prealpes klippen belt and surrounding structural units (Molasse basin and Jura fold-and-thrust belt). Remote sensing analyses allow to evaluate the impact of tectonics on the drainage pattern and landscape morphology. In addition, local field investigations in the Prealpes provide information on the nature and kinematic of brittle fractures and the paleostress fields.
Afin d'étudier la dynamique d'un système orogène/avant-pays et plus particulièrement l'impact des processus de surface sur son développement, notre travail se base sur deux axes principaux. Dans une première partie, à l'aide de modèles analogiques de prisme d'accrétion, nous analysons les interactions entre la tectonique, l'érosion et la sédimentation au cours de la croissance de l'orogène. Le modèle de base reproduit l'évolution d'une section de prisme, qui s'étend de l'orogène au bassin d'avant-pays, et où les héritages à la fois structural et lithologique sont simulés. Dans une seconde partie, l'accent est mis sur la tectonique récente et les processus géomorphologiques qui affectent la klippe des Préalpes suisses et les unités structurales environnantes (le bassin molassique et le Jura). Des analyses de télédétection permettent d'évaluer l'influence de la tectonique sur le réseau de drainage et la morphologie du paysage. De plus, des analyses de terrain menées localement dans les Préalpes fournissent des informations sur la nature et la cinématique des fractures cassantes et des champs de paléocontraintes.
https://tel.archives-ouvertes.fr/tel-00138836

tel-00138836
https://tel.archives-ouvertes.fr/tel-00138836
https://tel.archives-ouvertes.fr/tel-00138836/document
https://tel.archives-ouvertes.fr/tel-00138836/file/These_Bonnet_2007.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Grain deviations and high extractives content are common features of many tropical woods. We aimed at clarifying their respective impact on vibrational properties, referring to African Padauk (Pterocarpus soyauxii Taub.), a species selected for its interlocked grain, high extractives content, and uses in xylophones. Specimens were cut parallel to the trunk axis (L), and local variations in grain angle (GA), microfibril angle (MFA), specific Young's modulus (E'L/ρ, where r stands for specific gravity) and damping coefficient (tanδL), were measured. GA dependence was analyzed by a mechanical model which allowed to identify the specific Young's modulus (E'3/ρ) and shear modulus (G'/ρ) along the grain (3), as well as their corresponding damping coefficients (tanδ3, tanδG). This analysis was done for native and then for extracted wood. Interlocked grain resulted in 0-25° GA and in variations of a factor 2 in E'L/ρ and tanδL. Along the grain, Padauk wood was characterized, as compared to typical hardwoods, by a somewhat lower E'3/ρ and elastic anisotropy (E'/G'), due to a wide microfibril angle plus a small weight effect of extracts; and a very low tanδ3 and moderate damping anisotropy (tanδG/tanδ3). Extraction affected mechanical parameters in the order: tanδ3 ≈ tanδG > G'/ρ >> E'3/ρ. That is, extractives' effects were nearly isotropic on damping but clearly anisotropic on storage moduli.
ISSN: 0043-7719

hal-00544382
https://hal.archives-ouvertes.fr/hal-00544382
https://hal.archives-ouvertes.fr/hal-00544382/document
https://hal.archives-ouvertes.fr/hal-00544382/file/Identification_anisotropic_vibrational_properties_Bremaud_al.pdf
DOI : 10.1007/s00226-010-0348-0

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Mantle flow involves large strains of polymineral aggregates. The strongly anisotropic plastic response of each individual grain in the aggregate results from the interactions between neighbouring grains and the continuity of material displacement across the grain boundaries. Orthorhombic olivine, which is the dominant mineral phase of the Earth's upper mantle, does not exhibit enough slip systems to accommodate a general deformation state by intracrystalline slip without inducing damage. Here we show that a more general description of the deformation process that includes the motion of rotational defects referred to as disclinations can solve the olivine deformation paradox. We use high-resolution electron backscattering diffraction (EBSD) maps of deformed olivine aggregates to resolve the disclinations. The disclinations are found to decorate grain boundaries in olivine samples deformed experimentally and in nature. We present a disclination-based model of a high-angle tilt boundary in olivine, which demonstrates that an applied shear induces grain-boundary migration through disclination motion. This new approach clarifies grain-boundary-mediated plasticity in polycrystalline aggregates. By providing the missing mechanism for describing plastic flow in olivine, this work will permit multiscale modelling of the rheology of the upper mantle, from the atomic scale to the scale of the flow.
ISSN: 0028-0836

hal-01054315
https://hal.archives-ouvertes.fr/hal-01054315
DOI : 10.1038/nature13043

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Improving the prediction of sub-seismic structures and their petrophysical properties is essential for realistic characterization of deformed sandstone reservoirs. In the present paper, we describe permeability contrasts induced by cataclastic deformation bands and faults in porous sandstones (766 data synthesized from field examples and the literature). We also discuss the influence of several factors, including tectonic regime, presence of a fault, burial depth, host sandstone porosity, and grain size and sorting for their initiation and permeability. This analysis confirms that permeability decrease is as a function of grain-crushing intensity in bands. Permeability reduction ranges from very limited in crush-microbreccia of compaction bands to high permeability reduction in cataclasites and ultracataclasites of shear-dominated bands, band clusters and faults. Tectonic regime, and especially normal-fault regime, with its tendency to localize strain and generate faults, is identified as the most important factor, leading to the formation of cataclastic bands with high permeability contrasts. Moreover, moderate burial depth (1–3 km) favors cataclastic bands with high permeability contrasts with respect to the host sandstone. High porosity, coarse-grain size and good grain sorting can slightly amplify the permeability reductions recorded in bands.
ISSN: 0191-8141

hal-01218408
https://hal.archives-ouvertes.fr/hal-01218408
DOI : 10.1016/j.jsg.2015.03.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oman ophiolite includes both a fossil fast spreading axis, defined by five mantle diapirs, and an off-axis mantle diapir emplaced 30 km from the axis, providing a natural laboratory for the study of off-axis magmatic processes. We compare field and petrological observations coupled with geochemical and isotopic analyses of samples from the off-axis diapir with those of the nearest on-axis diapir, with a particular focus on the Moho Transition Zone (MTZ). Both diapirs are defined by the presence of steeply plunging lineations, but in the on-axis case, these lineations rotate gradually into parallelism with the horizontal magmatic lineations of the overlying crust, while in the off-axis case, a shear zone separates the steeply plunging lineations from the horizontal lineations of the surrounding mantle. In the on-axis diapir, the MTZ is 50 to 500 m thick and composed of dunite with layered gabbro lenses whereas in the off-axis diapir, the MTZ is thicker and composed of dunite with massive (∼20% of MTZ) clinopyroxenite lenses and a notable absence of plagioclase. Moreover, the off-axis diapir is associated with amphibole-bearing intrusions, consisting of Mg-rich gabbroic sills in the mantle peripheral to the diapir, and microgabbroic lenses of broadly basaltic composition in the overlying crust. The ε Nd values of the pyroxenites in the MTZ of the off-axis diapir fully overlap with those of the intrusions in the surrounding mantle and crust, suggesting that they are genetically related. Calculated rare earth element (REE) abundances of liquids in equilibrium with clinopyroxene imply that the magmas that traversed the MTZ of the off-axis diapir were more depleted in highly incompatible elements than their counterparts in the MTZ of the on-axis diapir. On the other hand, Nd isotopic compositions of the off-axis samples (εNd=6.2–7.9εNd=6.2–7.9 in 18 of 19 samples) indicate derivation of their parental magmas from a less depleted source than that which produced the magma associated with the on-axis gabbro (εNd=7.8–9.2εNd=7.8–9.2, 10 analyses).To explain these observations, we suggest that the earliest magmas in the uprising off-axis diapir formed from the partial melting of pyroxenite veins with less radiogenic Nd isotopic compositions than those of the ambient peridotite. As the diapir traversed the cool, hydrated lithosphere these early melts interacted with depleted harzburgites, lowering the incompatible element contents of the melt products while having little effect on their Nd isotopic compositions. The great abundance of clinopyroxene in the off-axis MTZ might be explained by the high pyroxene component in the original melt but perhaps also by the presence of water in the lithosphere, which would favor the crystallization of clinopyroxene while inhibiting that of plagioclase. The intrusions in the overlying crust could represent, to first order, the secondary melts produced by the melt–harzburgite reaction, while the sills in the surrounding mantle may be cumulates from such secondary melts.These results shed light on processes occurring during interaction between rising off-axis material and depleted, hydrated lithospheric mantle. Furthermore, if our interpretation is correct, the low εNd values of the off-axis samples contribute to the growing body of evidence for the presence of pyroxenite veins in the MORB mantle source.
ISSN: 0012-821X

hal-01306575
https://hal.archives-ouvertes.fr/hal-01306575
DOI : 10.1016/j.epsl.2015.12.005

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Torsion experiments (inline image =3 × 10−4 s−1) were performed to investigate the large strain (γmax = 15) rheology on quartz-muscovite aggregate as analogue to pelitic rocks undergoing melting and crystallization during deformation at 300 MPa confining pressure and 750°C temperature. Microstructures reveal four distinct but gradational stages of crystal-melt interactions during deformation--(a) solid state deformation, (b) initiation and domination of partial melting, (c) simultaneous partial melting and crystallization, and (d) domination of crystallization. The microstructural stages are linked to the rheology of the deforming samples. Partial melting starts at relatively low finite shear strains (γ = 1-3) showing approximately 60% strain softening. At γ = 4-10 the partially molten bulk material shows a steady state flow at low stress. Further crystallization of new crystals at the expense of melt between γ = 10 and 15 causes weak strain hardening until the material fails by developing brittle fractures. The stress exponent (n), calculated at γ = 1, 5, and 10, increases from ∼ 3 to ∼ 43, indicating a transition from power to power law breakdown or exponential flow of the bulk system. Hydrostatic experiments for equivalent times and conditions of the torsion experiments were also conducted to evaluate the reaction kinetics and microstructures under static conditions. The new experimental data establish that partially molten rock does not flow according to a constant strain rate-dependent power law (steady state) rheology. The rheological transition from strain rate sensitive to strain rate insensitive flow is interpreted as a function of melt-crystal ratio, their mutual interactions, and the evolution of microstructures in the partially molten rock.
ISSN: 0148-0227

hal-01053709
https://hal.archives-ouvertes.fr/hal-01053709
DOI : 10.1002/2013JB010777

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : Upper Carboniferous heating and melting of the middle orogenic crust associated with the emplacement of syntectonic granitoids are documented in the Upper Gneissic Unit of the Livradois area (central part of the French Massif Central). Crustal melting post-dates peak metamorphism conditions (800-625 degrees C, 10-8 kb) dated at 360 +/- 4 Ma (U-Th-Pb on monazite). The P-T evolution of the metamorphic series indicates that Barrovian metamorphism was followed by a decompression (from 10 +/- 1 kbar to 6 +/- 1 kbar) associated with either a decrease in temperature in the southern part of the series or with an increase in temperature (of about 150 degrees C) in the northern part of the series. This evolution records the first step of the exhumation of the series coeval with granitoids intrusion, of which the emplacements were dated at 315 +/- 4 and 311 +/- 18 Ma (U-Pb on zircon). The final stage of the exhumation is associated with an isobaric cooling of the whole series. Similarity of Ar-40/Ar-39 ages for biotite in the paragneisses (307-300 Ma) and K-feldspar in the granitoids (306-300 Ma) document rapid cooling for this stage. Moreover dextral reverse mylonites, at the border and the northern part of the metamorphic series indicate north-south compression coeval with the unroofing of the series. Youngest Ar-40-Ar-39 ages on K-feldspar (274.6 +/- 5 Ma) combined with normal shearing in mylonites limiting the Carboniferous Brassac-les-Mines basin document the late Carboniferous-early Permian stage of extension coeval with the upwelling of the Velay granitic dome.
EISSN: 1777-5817

hal-00617429
https://hal.archives-ouvertes.fr/hal-00617429
DOI : 10.2113/gssgfbull.182.1.5

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In order to estimate the seismic anisotropy of subducted crust, polycrystalline samples of KA1Si(3)O(8) K-lingunite (25% of the total subducted transformed sediments), have been synthesized and deformed under the temperature and pressure conditions of the subducted slabs. Transmission electron microscopy (TEM) characterizations of the recovered samples reveal that the microstructures are clearly dominated by [001] glide involving screw dislocations. For this reason, only {100} could be identified as glide planes, the question of [001] slip on {110} remains open. Few 1/2 < 111 > dislocations were observed gliding on {110} planes, which implies that 1/2 < 111 > {110} is a harder slip system than those involving [001] slip. The occurrence of sub-grain boundaries suggests that diffusion and climb might be active under these conditions.;To assess the texture of polycrystalline K-lingunite, the crystal preferred orientations (CP05) were calculated using visco-plastic self-consistent (VPSC) polycrystalline plasticity model in simple shear using the slip systems identified by TEM. Finally, the seismic properties of K-lingunite aggregates were calculated from the CPO and single crystal elasticity tensor. K-lingunite is predicted to have a high seismic anisotropy, which could combine constructively with one of the stishovite (same proportion as K-lingunite at the transition zone depth ranges).
ISSN: 0031-9201

hal-00534050
https://hal.archives-ouvertes.fr/hal-00534050
DOI : 10.1016/j.pepi.2010.06.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Four decades after their introduction, the validity of fault slip inversion methods based on Wallace (1951) and Bott (1959) hypothesis, which states that the slip on each fault surface has the same direction and sense as the maximum resolved shear stress, is still a subject of debate. According to some authors, this hypothesis is questionable since fault mechanical interactions induce slip reorientations as confirmed by geomechanical models. This leads us to ask as to what extent the Wallace-Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. In this paper, we compare two inversion methods; the first is based on the Wallace-Bott hypothesis, and the second relies on geomechanics and mechanical effects on fault heterogeneous slip distribution. In that context, a multi-parametric stress inversion study covering (i) the friction coefficients (μ), (ii) the full range of Andersonian state of stress and (iii) slip data sampling along the faults is performed. For each tested parameter, the results of the mechanical stress inversion and the Wallace-Bott (WB) based stress inversion for slip are compared in order to understand their respective effects. The predicted discrepancy between the solutions of both stress inversion methods (based on WB and mechanics) will then be used to explain the stress inversions results for the chimney Rock case study. It is shown that a high solution discrepancy is not always correlated with the misfit angle (ω ) and can be found under specific configurations (View the MathML sourceR−, θ, μ, geometry) invalidating the WB solutions. We conclude that in most cases the mechanical stress inversion and the WB based stress inversion are both valid and complementary depending on the fault friction. Some exceptions (i.e. low fault friction, simple fault geometry and pure regimes) that may lead to wrong WB based stress inversion solutions are highlighted.
ISSN: 0040-1951

hal-01467165
https://hal.archives-ouvertes.fr/hal-01467165
DOI : 10.1016/j.tecto.2016.11.039