Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The chemical and isotopic compositions of clay minerals such as illite and chlorite are commonly used to quantify diagenetic and low-grade metamorphic conditions, an approach that is also used in the present study of the Monte Perdido thrust fault from the South Pyrenean fold-and-thrust belt. The Monte Perdido thrust fault is a shallow thrust juxtaposing upper Cretaceous-Paleocene platform carbonates and Lower Eocene marls and turbidites from the Jaca basin. The core zone of the fault, about 6 m thick, consists of intensely deformed clay-bearing rocks bounded by major shear surfaces. Illite and chlorite are the main hydrous minerals in the fault zone. Illite is oriented along cleavage planes while chlorite formed along shear veins (<50 μm in thickness). Authigenic chlorite provides essential information about the origin of fluids and their temperature. δ18O and δD values of newly formed chlorite support equilibration with sedimentary interstitial water, directly derived from the local hanging wall and footwall during deformation. Given the absence of large-scale fluid flow, the mineralization observed in the thrust faults records the P-T conditions of thrust activity. Temperatures of chlorite formation of about 240°C are obtained via two independent methods: chlorite compositional thermometers and oxygen isotope fractionation between cogenetic chlorite and quartz. Burial depth conditions of 7 km are determined for the Monte Perdido thrust reactivation, coupling calculated temperature and fluid inclusion isochores. The present study demonstrates that both isotopic and thermodynamic methods applied to clay minerals formed in thrust fault are useful to help constrain diagenetic and low-grade metamorphic conditions.
ISSN: 0010-7999

hal-00757736
https://hal.archives-ouvertes.fr/hal-00757736
DOI : 10.1007/s00410-011-0718-0

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
As previously suggested by many authors, shear wave splitting rneasurernents certainly provide the best insights on the tectonic structure (or fabric) of the upper mantle. Shear wave splitting pararneters are correlated with the flow fabric developed in the deforming upper mantle. Petrophysical analysis of peridotites [e.g., Kem et al., 1996; Mainprice and Silver, 1993] shows that the largest anisotropy is recorded for shear waves propagating close to the Y structural direction (i.e., normal to the lineation in the foliation plane) and that the fast split shear wa ve is polarized in a plane parallel to the X structural axis (i.e., the lineation, marked by the olivine a axis concentration). Mapping shear wave splitting parameters over a specific tectonic domain would therefore provide an image of the mantle fabric at depth.
ISSN: 2169-9313

hal-01389720
http://hal.univ-reunion.fr/hal-01389720
http://hal.univ-reunion.fr/hal-01389720/document
http://hal.univ-reunion.fr/hal-01389720/file/Vauchez_comment_JGR_1999_hal.pdf
DOI : 10.1029/1999JB900053

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
In Eastern China, the North China Block (NCB) has experienced a complex tectonic evolution during Late Palaeozoic to Mesozoic times. The unconformable sedimentary cover, which ranges in age from Neoproterozoic to Permian, underwent two tectonic episodes in Early Triassic and Cretaceous times. An early north–south compressional phase, D1, characterized by north-verging recumbent folds with east–west-trending axes and top-to-the-north ductile shear zones can be observed in a gabbroic pluton and the Neoproterozoic sedimentary host rocks. The available radiometric ages allow us to interpret this event as an Early Triassic back-thrusting related to the final stage of the collision between the North China and South China Blocks. During the LateMesozoic, an extensional event characterized by (1) half-grabens filled by continental terrigeneous red beds and lava flows, (2) low-angle detachment faults, (3) synkinematic granitic plutons, and (4) metamorphic core complexes is widespread in the Eastern Liaoning Peninsula. This extensional D2 event can be subdivided into a ductile deformation and a brittle deformation, corresponding to different expressions of crustal deformation. In every area studied in the Eastern Liaoning Peninsula, the ductile D2 deformation is characterized by a NW–SE-trending stretching lineation with a top-to-the-NWsense of shear.Mica and amphibole fromthe metamorphic country rocks, granodioritic or monzogranitic plutons and their mylonitized margins yield 40Ar/39Ar ages ranging from 130 to 120 Ma. These dates support fast cooling and exhumation rates coeval with the extensional tectonics. The brittle D2 deformation is responsible for the formation of high-angle normal faults marked by low-temperature cataclasites bounding half-grabens. During the Mesozoic, the tectonic regime of Eastern China experienced a significant inversion from compression to extension. The Eastern Liaoning Peninsula massif provides an example of this geodynamic transition.
ISSN: 2041-4927

hal-00134055
https://hal-insu.archives-ouvertes.fr/hal-00134055
DOI : 10.1144/SP280.7

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
This paper aims to decipher the thermal evolution of the Montagne Noire Axial Zone (MNAZ,southern French Massif Central) gneiss core and its metasedimentary cover through determination ofP–T paths and temperature gradients. Migmatitic gneiss from the core of the dome record a clock-wise evolution culminating at 725 25 °C and 0.8 0.1 GPa with partial melting, followed by adecompression path with only minor cooling to 690 25° C and 0.4 0.1 GPa. Field structuralanalyses as well as detailed petrological observations interpreted in a petrogenetic grid indicate thatthe cover sequence experienced LP-HT metamorphism at <0.4 GPa. Apparent thermal gradientswithin the cover were determined with garnet–biotite thermometry and Raman Spectroscopy on Car-bonaceous Matter. High-temperature apparent gradients (e.g. 530 °C km1 along one transect) areexplained by late brittle–ductile extensional shearing evidenced by phyllonites that post-date peakmetamorphism. In areas where normal faults are less abundant and closely spaced, gradients of 20to 50 °C km1 are calculated. These gradients can be accounted for by a combination of domeemplacement and ductile shearing (collapse of isotherms), without additional heat input. Finally, thethermal evolution of the MNAZ is typical for many gneiss domes worldwide as well as with otherLP-HT terranes in the Variscides.
ISSN: 0263-4929

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388/document
https://hal-insu.archives-ouvertes.fr/insu-01290388/file/jmg12188.pdf
DOI : 10.1111/jmg.12188

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigate the timing of end of motion along the South Tibet Detachment System (STDS), a major normal fault system that runs parallel to the Himalayan range for more than 1500 km. Near Dinggye (similar to 28 degrees 10'N, 87 degrees 40'E), the STD dips similar to 10 +/- 5 degrees to the North and separates Paleozoic Tethyan series from Upper Himalayan Crystalline Series (UHCS). Immediately below the STD, the UHCS is highly deformed in the STD shear zone, lineations trend NNE and the shear senses are top to the NE. In micaschist, the P-T path constrained by pseudosection and garnet chemistry, shows successive metamorphic conditions of similar to 0.6 GPa and similar to 550 degrees C and 0.5 GPa and 625 degrees C. U/Pb dating of monazites and zircons in deformed and undeformed leucogranites suggests that ductile deformation lasted until at least similar to 16 Ma but ended prior to similar to 15 Ma in the STD shear zone similar to 100 m below the detachment. Ar/Ar micas ages in the footwall span between similar to 14.6 and 13.6 Ma, indicating rapid cooling down to similar to 320 degrees C, and suggesting persistence of normal faulting, at that time. The STDS is cut and offset by the N-S trending Dinggye active normal fault which initiated prior to 11 Ma thus providing a minimum bound for the end of STDS motion. These data are interpreted as reflecting 0.3 GPa (11 km) to 0.6 GPa (22 km) of exhumation along the STDS starting prior to similar to 16 Ma, ending between 13.6 and 11 Ma. The 1000 km long stretch of the STDS east of the Gurla Mandata probably stopped almost synchronously between 13 and 11 Ma ago, coevally with a sudden switch from NNE-SSW to E-W extension at the top of the accretionary prism, with a jump of the major thrust from the lower Main Central Thrust (MCTI) to the Main Boundary Thrust (MBT), and with a change in the India and Asia convergence direction. This synchronism is probably better explained in the frame of a thrust wedge or thrust system model than a lower channel flow model. West of the Gurla Mandata the STDS appears to stop 5 to 3 Ma earlier, possibly related to local interactions with the Karakorum fault in a way that needs to be understood.
ISSN: 0012-821X

hal-00475652
https://hal.archives-ouvertes.fr/hal-00475652
DOI : 10.1016/j.epsl.2009.12.035

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this study, we report new U-Pb zircon ages and amphibole and biotite 40Ar-39Ar cooling ages for igneous and metaigneous rocks from the eastern portion of the Borborema Province (NE Brazil). We combine these results with preliminary thermobarometric estimates and existing data to place constraints on the timing and duration of the Brasiliano-Pan-African Orogeny in northeastern Brazil and on the subsequent late- to post-orogenic history. The Alcantil orthogneiss contains a complex zircon population, but the youngest concordant analyses yielded an age of 632 ± 17 Ma (2σ). These grains have low Th/U ratios (<0.1), and the age of 632 Ma is therefore interpreted as dating the metamorphic event responsible for the acquisition of the gneissic fabric. In the Caruaru biotite amphibole orthogneiss, concordant analyses provided an age of 618 ± 4 Ma (2σ), which we relate to emplacement of the protolith of the Caruaru orthogneiss. Together with available U-Pb data from the literature, the 632-600 Ma age range is regarded as dating development of a regional flat-lying foliation coeval with high-grade metamorphism (upper amphibolite facies conditions). The 586 ± 3 Ma age (2σ) of the Panelas pluton is similar to those of other granitic plutons associated with a voluminous plutonism of high-K calc-alkaline to shoshonitic nature that occurred at 590-580 Ma. This plutonism slightly predated or was synchronous with development of large strike-slip shear zones. Amphibole grains yielded 40Ar-39Ar ages ranging from 584 ± 4 Ma to about 530 Ma, suggesting that regional temperatures remained near the closing temperature of this mineral (≈500 °C) for a long time. Most 40Ar-39Ar biotite ages range from 552 to 533 Ma, but two samples yielded plateau ages of 519 ± 5 Ma and 509 ± 5 Ma. The inferred rather slow cooling of the studied region possibly reflects low rates of unroofing, allowing persistence of a protracted thermal anomaly caused by the massive injection of magmas at the end of the Neoproterozoic.
ISSN: 0895-9811

hal-00745698
https://hal.archives-ouvertes.fr/hal-00745698
DOI : 10.1016/j.jsames.2012.06.003

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
We show here that the Amalaoulaou complex, in the Pan-African belt of West Africa (Gourma, Mali), corresponds to the lower and middle sections of a Neoproterozoic intra-oceanic arc. This complex records a 90-130-Ma-long evolution of magmatic inputs and differentiation above a subducting oceanic slab. Early c. 793 Ma-old metagabbros crystallised at lower crustal or uppermost mantle depths (25-30 km) and have geochemical characteristic of high-alumina basalts extracted from a depleted mantle source slightly enriched by slab-derived sedimentary components ((La/Sm)(N) < 1; epsilon(Nd): +5.4-6.2; Sr-87/Sr-86: 0.7027-0.7029). In response to crustal thickening, these mafic rocks were recrystallised into garnet-granulites (850-1,000A degrees C; 10-12 kbar) and subject to local dehydration-melting reactions, forming trondhjemititic leucosomes with garnet-clinopyroxene-rutile residues. Slightly after the granulitic event, the arc root was subject to strong HT shearing during partial exhumation (detachment faults/rifting or thrusting), coeval with the emplacement of spinel- and garnet-pyroxenite dykes crystallised from a high-Mg andesitic parental magma. Quartz and hornblende-gabbros (700-660 Ma) with composition typical of hydrous volcanic rocks from mature arcs ((La/Sm)(N): 0.9-1.8; epsilon(Nd): +4.6 to +5.2; Sr-87/Sr-86: 0.7028-0.7031) were subsequently emplaced at mid-arc crust levels (similar to 15 km). Trace element and isotopic data indicate that magmas tapped a depleted mantle source significantly more enriched in oceanic sedimentary components (0.2%). Exhumation occurred either in two stages (700-660 and 623 Ma) or in one stage (623 Ma) with a final exhumation of the arc root along cold P-T path (550A degrees C, 6-9 kbar; epidote-amphibolite and greenschist facies conditions) during the main Pan-African collision event (620-580 Ma). The composition of magmas forming the Cryogenian Amalaoulaou arc and the processes leading to intra-arc differentiation are strikingly comparable to those observed in the deep section of exposed Mezosoic oceanic arcs, namely the Kohistan and Talkeetna complex. This evolution of the Amalaoulaou oceanic arc and its accretion towards the West African craton belong to the life and closure of the Pharusian Ocean that eventually led to the formation of the Greater Gondwana supercontinent, a similar story having occurred on the other side of the Sahara with the Mozambique Ocean.
ISSN: 0010-7999

hal-00639447
https://hal.archives-ouvertes.fr/hal-00639447
DOI : 10.1007/s00410-011-0624-5

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The analysis of three cataclastic band sets from Provence (France) reveals that the band density, their conjugate angles, their ratio of shear displacement to compaction, and the amount of cataclasis within the bands differ and can be expressed as functions of tectonic setting and petrophysical properties. We identify (1) a dense and closely spaced network of shear-enhanced (reverse) compaction bands; (2) a regularly spaced less dense network of reverse compactional shear bands; and (3) a localized network of normal shear bands. The field data show that strain localization is favored in an extensional regime and is characterized by shear bands with a large shear to compaction ratio and a small conjugate band angle. In contrast, distributed strain is favored in a contractional regime and is characterized by compactional bands with a low ratio of shear to compaction and a large conjugate band angle. To explain the mechanical origin of this strain localization, we quantify the yield strength and the stress evolution in extensional and contractional regimes in a frictional porous granular material. We propose a model of strain localization in porous sands as a function of tectonic stresses, burial depth, material properties, strain hardening and fluid pressure. Our model suggests that stress reduction, inherent to extensional regime, favors strain localization as shear bands, whereas stress increase during contraction favors development of compactional bands.
ISSN: 0191-8141

hal-00856921
https://hal.archives-ouvertes.fr/hal-00856921
DOI : 10.1016/j.jsg.2012.11.011

Éditeur(s) : HAL CCSD
Résumé : International audience
The Kazdağ Massif exposes a metamorphic dome in the Biga Peninsula of northwest Turkey. An extensional origin has been proposed for the dome, limited on both flanks by detachments and/or shear zones. The northern flank is bounded by the extensional Alakeçi Shear Zone (ASZ), whose P-T-t path is still poorly known. We therefore focus on its metamorphic conditions and related temporal history to precise its tectono-metamorphic evolution. The local tectonostratigraphy in structurally ascending order comprises: (i) the high-grade metamorphic core rocks of the Kazdaǧ Massif (gneisses and micaschists intercalated with amphibolites and marbles); (ii) the two kilometer-thick ASZ; (iii) the overlaying unmetamorphosed pre-Cenomanian accretionary Çetmi mélange; and (iv) Neogene sedimentary and volcanic cover rocks. ASZ mylonites were derived from both the core rocks and the mélange lithologies. From the north to the south the mylonitic fabrics in the ASZ depict a top-to-the N-NNE shearing, parallel to the NNE-plunging stretching lineation and NNW-dipping mylonitic foliation. This geometry implies normal sense movement i.e. north-side down-dip extensional displacement along this flank of the Kazdaǧ Massif. The northward transition from ductile to brittle-ductile regime through the ASZ shows that the deformation occurred at decreasing temperatures and degree of metamorphism. The paragenesis in equilibrium within the mylonitic gneisses and schists contains Qtz + Fs + Ms + Bt + Grt ± St ± Sill, with late retrogressive chlorite after biotite and garnet. Four samples of ASZ rocks yielded pressures between 6.9-5.7 kbar and temperatures between 706-587°C. Three samples from the mylonitic rocks supplied in situ isochron 36Ar/40Ar mica ages between 31.2-24.2 Ma, which we interpret to date the cooling of the mylonites following the P-T decrease across the ASZ. The metamorphic and structural results support the extensional character of the ASZ, and sketch transition from sillimanite core gneisses in the deeper structural levels to chlorite schists towards the top of the shear zone. These new data allow to precise the peak P-T conditions and the temporal evolution in the northern flank of the Kazdaǧ Massif, where Late Oligocene extensional exhumation was assisted by NNE-directed ductile-brittle ASZ, which had operated from amphibolite to greenschist facies. At the regional scale, this tectono-metamorphic pattern is similar to those observed on other places of the north Aegean domain.
IOP Conference Series
Austin, TE, United States

hal-00642725
https://hal-brgm.archives-ouvertes.fr/hal-00642725
DOI : 10.1088/1755-1307/2/1/012012

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] Zircons and monazites from 6 samples of the North Ayilari dextral shear zone (NAsz), part of the Karakorum fault zone (KFZ), have been dated with the U-Th-Pb method, using both ID-TIMS and SIMS techniques. The ages reveal (1) inheritance from several events spanning a long period between the late Archean and the Jurassic; (2) an Eocene-Oligocene magmatic event (similar to 35-32 Ma); (3) an Oligo-Miocene magmatic event (similar to 25-22 Ma), at least partly synkinematic to the right-lateral deformation; and (4) a period of metamorphism metasomatism (similar to 22-14 Ma) interpreted as thermal and fluid advection in the shear zone. The Labhar Kangri granite located similar to 375 km farther Southeast along the KFZ is dated at 21.1 +/- 0.3 Ma. Such occurrence of several Oligo-Miocene granites along the KFZ, some of which show evidence for synkinematic emplacement, suggests that the fault zone played an important role in the genesis and /or collection of crustal melts. We discuss several scenarios for the onset and propagation of the KFZ, and offset estimates based on the main sutures zones. Our preferred scenario is an Oligo-Miocene initiation of the fault close to the NA range, and propagation along most of its length prior to similar to 19 Ma. In its southern half, the averaged long-term fault-rate of the KFZ is greater than 8 to 10 mm/a, in good agreement with some shorter-term estimates based on the Indus river course, or Quaternary moraines and geodesy. Our results show the KFZ cannot be considered as a small transient fault but played a major role in the collision history.
ISSN: 0278-7407

hal-00412570
https://hal.archives-ouvertes.fr/hal-00412570
DOI : 10.1029/2007TC002184

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We explore the use of seismic noise produced by rivers to monitor the bed load transport in the case of a low-discharge braided river in the French Alps: the "torrent de St Pierre". For this purpose, we deployed two dedicated seismic networks during summers 2007 and 2008, for which the characteristics of the recorded continuous signal are similar despite changes in the sensor locations. For dry weather conditions, only melting of nearby glaciers controls the supply of water to the stream. In these conditions, the river hydrology and the seismic energy in the 2-80 Hz frequency band both follow a diurnal fluctuation similar to the thermal amplitude. In contrast during rainfall episodes, the temperature variation fails to explain the hydrodynamic changes. Dense cloud covers reduce glacier melting and the recorded seismic energy denotes bursts of high-frequency seismic noise well correlated with water level data. Comparisons between the recorded seismic signals and the collected hydrological and sediment load data indicate that a frequency band of 3-9 Hz best explains the water level changes and thus the seismic waves coming from the flow turbulence. These analyses also reveal the presence of a seismic noise threshold that might be linked to the water shear stress exerted by the flowing water. Using the seismic energy in this frequency band as a proxy of the fluvial shear stress, the seismic-hydrologic relationship may be sensitive to variations in bed load transport. The spectral content of the seismic energy shows patterns consistent with the mobilization of sediment particles. From the interpretations of the seismic wave attenuation of river sources, we finally propose that stations at a distance from the stream less than 50 m are able to record most sediment particles. Farther stations are still useful during extreme events when largest grain sizes are mobilized. More generally this study demonstrates the feasibility of using the river seismic signal to survey bed load transport in various river types from small braided mountain rivers like the "torrent de St Pierre" to the large entrenched Himalayan rivers.
ISSN: 0022-1694

hal-00644789
https://hal.archives-ouvertes.fr/hal-00644789
DOI : 10.1016/j.jhydrol.2011.07.014

Éditeur(s) : Université de Bretagne Occidentale
Résumé : Study of mineral suspended particulate matter (SPM) is essential to understand ecosystem dynamics. SPM influences light penetration which is closely related to primary production and carries pollutants and nutrients within the water masses. This work aims to study near-surface mineral SPM dynamics in the English Channel using two complementary methods: remote-sensing by satellites and numerical modelling. Firstly, MODIS and MERIS satellite images processed by the IFREMER semi-analytical algorithm and describing non-algal SPM, are analysed to build three statistical models which are able to estimate near-surface SPM using simple variables, e.g., tidal coefficient, significant wave height and mean chlorophyll-a concentration. Secondly, the three-dimensional hydrosedimentary model ROMS (Regional Ocean Modeling System) is applied in the English Channel. It considers tidal forcing along open boundaries, wind stress at the sea-surface, wave-current interactions in the bottom boundary layer and realistic heterogeneous bottom sediments. Results of the more sophisticated statistical model is also used to impose SPM concentrations at open boundaries. Sensitivity tests on SPM boundary conditions show the importance of prescribing realistic sediment concentrations to improve the model predictions. Biological influences on mineral SPM are also tested using settling velocity and critical shear stress for erosion which vary with seasons. Both statistical and numerical models highlight and locate respective influences of tide, waves and biology on mineral SPM. Numerical predictions indicate that near-surface SPM is mainly composed of silts (>70%). Near-surface suspended silts come largely from seabed resuspension alongshore in the Eastern Channel and from the open boundaries of our limited-area coastal model at the West of Cotentin Peninsula and offshore. Near-surface SPM variations are investigated at semi-diurnal, neap-spring tidal cycle time scales and during a wave event. Finally, dynamics of sediments in the turbidity maximum zone around the Isle of Wight is examined depending on hydrodynamical conditions in order to distinguish the role played by advection and local erosion/settling processes in this area. Keywords: Suspended particulate matter, satellite, remote-sensing, modelling, English Channel, sediments, turbidity, tide, wave
L'étude des matières en suspension (MES) minérales est essentielle pour comprendre le fonctionnement des écosystèmes en Manche : les MES influencent la pénétration de la lumière dans la colonne d'eau, paramètre clé pour la production biologique, et sont susceptibles de transporter des polluants et nutriments. Lors de ce travail, la dynamique des MES minérales de surface en Manche est étudiée à l'aide de deux méthodes complémentaires : l'observation par satellite et la modélisation numérique tridimensionnelle. Dans un premier temps, les images satellite MODIS et MERIS, traitées par l'algorithme semi-analytique développé par l'IFREMER et représentant les MES non-algales de surface, sont analysées afin d'élaborer trois modèles statistiques permettant d'estimer la MES de surface en fonction de variables basiques telles que le coefficient de marée, la hauteur significative des vagues et la concentration moyenne en chlorophylle-a. Dans un deuxième temps, le modèle hydrosédimentaire multiclasse tridimensionnel ROMS (Regional Ocean Modeling System) est implémenté en Manche. Il prend en considération le forçage par la marée aux frontières ouvertes, la contrainte exercée par le vent à la surface de la mer, l'interaction houle-courant en couche limite de fond et l’hétérogénéité spatiale réaliste du lit sédimentaire. Les résultats du modèle statistique le plus sophistiqué sont également utilisés pour forcer la concentration en MES aux frontières ouvertes du domaine de calcul. Des tests de sensibilité sur les conditions limites montrent l'importance de considérer de manière réaliste les sédiments entrant en Manche par les frontières ouvertes lors de la modélisation numérique. L'influence de la biologie sur les MES minérales est testée en utilisant une formulation de la vitesse de chute et de la contrainte critique d'érosion variant saisonnièrement. Grâce à ces deux outils associés, les influences respectives de la marée, de la houle et de la biologie sur les MES minérales sont mises en avant et localisées en Manche. Le modèle numérique prédit que les MES de surface sont composées principalement de silts (>70%). Les silts en suspension en surface proviennent majoritairement du lit sédimentaire près des côtes en Manche orientale et des frontières ouvertes du domaine de calcul à l'ouest de la presqu'île du Cotentin et au large en Manche centrale et orientale. Les variations des MES de surface sont ensuite étudiées aux échelles des cycles de marée semi-diurnes, vive-eau/morte-eau et autour d'un épisode de houles. Enfin, l'évolution de la concentration de sédiments dans la zone de forte turbidité autour de l'île de Wight peut être analysée suivant les conditions hydrodynamiques afin d'évaluer les rôles respectifs des processus locaux d'érosion/dépot et d'advection dans la génération de ces turbidités remarquables. Mots-clés : Matière en suspension, télédétection, satellite, modélisation, Manche, sédiments, turbidité, marée, houle

Droits : 2013 UBO
http://archimer.ifremer.fr/doc/00157/26783/24884.pdf
http://archimer.ifremer.fr/doc/00157/26783/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
TEM Study of Heavitree quartzite deformed at high temperatures and a pressure of 1.5 GPa with three different preparations: water-added, vacuum dried, and sodium doped show a wide range of dislocation microstructure. The vacuum dried sample has a very heterogeneous dislocation distribution varying from almost no dislocations to very high densities. Dislocation nucleation occurs by cross-slip mechanisms, such as Frank-Read sources and Orowan loops around hard inclusions. Shear bands develop in the basal plane composed of two closely spaced shear planes. Dislocations have straight segments and they are aligned along directions of dense packing, suggesting strong Peierls stress control due to the crystal structure. No voids, bubbles or dislocation walls where observed in the vacuum dried sample. The sodium-doped sample had a homogeneous high dislocation density. The water-added sample has a significantly lower, relatively uniform dislocation density. Bubbles associated with dislocations are seen in every grain. Dislocations were either present in loops around bubbles or as straight dislocations with small bubbles spaced along the dislocation line. Some of the long straight dislocations are aligned parallel to the c-axis. Sub-grains where very frequent, sometimes form cells of about 2 p,m in diameter with straight edges. Analysis of dislocations show 1/3 < a > and [c] dislocations in sub-grain walls and free 1/3 < a > dislocations on prism planes. There is clear evidence for dislocation climb with sub-grain walls, dislocation cells, dislocation junctions and dislocation debris of small loops. The major difference between vacuum dried and water-added samples are the homogeneity of the microstructure and evidence for climb in the water-added sample. Glide is clearly difficult, with a high Peierls stress in the vacuum dried sample as shown by areas of very low and very high dislocation density and the crystallographic control of dislocation line direction. The sodium-doped sample indicates that nucleation was easy by the high homogenous dislocation density, but no climb recovery has taken place. The density is high and the dislocations are strongly interacting causing tangles; no evidence for crystallographic control can be observed at these levels of strain. The activation energy for creep in Heavitree quartzite decreases with inferred water content of the specimens form 185 kJ mol(-1) for vacuum dried to 151 for 0.4 wt% water-added samples. Analysis of diffusion data for oxygen under hydrothermal conditions and inferred diffusion data for the hydrogarnet defect and dislocation velocity suggests activation energies for these processes are similar to the activation energy for the dislocation creep of Heavitree quartzite and other quartz aggregates. For data from the previously published experiments with the highest stress resolution there is a correlation between the A pre-factor in the power law creep equation and the activation energy for creep. It is speculated that the correlation may be due to variable hydrogarnet defect concentrations.
ISSN: 0031-9201

hal-00413112
https://hal.archives-ouvertes.fr/hal-00413112
DOI : 10.1016/j.pepi.2008.07.009

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : New structural, microstructural, and 40Ar/39Ar data from the NW Massif Central (France) provide additional constraints on the timing and tectonic setting of late Variscan granite magmatism. Previous studies had emphasized the role of late orogenic extension in the emplacement of granite plutons in the Limousin region. In contrast, the new data set is consistent with syntectonic emplacement of magma in a dextral simple shear active from 350 to 300 Ma in a transpressional regime. As an alternative hypothesis to late orogenic extension, we propose that magmas migrated into tensional bridges between active P shears associated with a lithospheric shear zone comparable to a pop-up structure. The Galician region, in the western end of the Ibero-Armorican tectonic arc, exhibits major left-lateral ductile shear zones which can be interpreted as conjugate structures to the Limousin and Armorican shear zones. Citation: Ge´belin, A., M. Brunel, P. Monie´, M. Faure, and N. Arnaud (2007), Transpressional tectonics and Carboniferous magmatism in the Limousin, Massif Central, France: Structural and 40Ar/39Ar investigations
ISSN: 0278-7407

hal-00104212
https://hal-insu.archives-ouvertes.fr/hal-00104212
https://hal-insu.archives-ouvertes.fr/hal-00104212/document
https://hal-insu.archives-ouvertes.fr/hal-00104212/file/2005TC001822.pdf
DOI : 10.1029/2005TC001822

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Contractional deformation of highly porous sandstones is poorly explored, as compared to extensional deformation of such sedimentary rocks. In this work we explore the highly porous Aztec Sandstone in the footwall to the Muddy Mountain thrust in SE Nevada, which contains several types of deformation bands in the Buffington tectonic window: 1) Distributed centimeter-thick shear-enhanced compaction bands (SECBs) and 2) rare pure compaction bands (PCBs) in the most porous parts of the sandstone, cut by 3) thin cataclastic shear-dominated bands (CSBs) with local slip surfaces. Geometric and kinematic analysis of the SECBs, the PCBs and most of the CSBs shows that they formed during ∼E–W (∼100) shortening, consistent with thrusting related to the Cretaceous to early Paleogene Sevier orogeny of the North American Cordilleran thrust system. Based on stress path modeling, we suggest that the compactional bands (PCBs and SECBs) formed during contraction at relatively shallow burial depths, before or at early stages of emplacement of the Muddy Mountains thrust sheet. The younger cataclastic shear bands (CSBs, category 3), also related to E–W Sevier thrusting, are thinner and show larger shear offsets and thus more intense cataclasis, consistent with the initiation of cataclastic shear bands in somewhat less porous materials. Observations made in this work support earlier suggestions that contraction lead to more distributed band populations than what is commonly found in the extensional regime, and that shear-enhanced compaction bands are widespread only where porosity (and permeability) is high.
ISSN: 0191-8141

hal-01171854
https://hal.archives-ouvertes.fr/hal-01171854
DOI : 10.1016/j.jsg.2015.02.014

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report structural evidence of ductile strain localization in mantle pyroxenite from the spinel to plagioclase websterite transition in the Ronda Peridotite (southern Spain). Mapping shows that, in this domain, small-scale shear zones occurring at the base of the lithospheric section are systematically located within thin pyroxenite layers, suggesting that the pyroxenite was locally weaker than the host peridotite. Strain localization is associated with a sudden decrease of grain size and increasing volume fractions of plagioclase and amphibole as a result of a spinel to plagioclase phase transformation reaction during decompression. This reaction also fostered hydrogen extraction ('dehydroxylation') from clinopyroxene producing effective fluid saturation that catalyzed the synkinematic net-transfer reaction. This reaction produced fine-grained olivine and plagioclase, allowing the onset of grain-size sensitive creep and further strain localization in these pyroxenite bands. The strain localization in the pyroxenites is thus explained by their more fertile composition, which allowed earlier onset of the phase transition reactions. Geothermobarometry undertaken on compositionally zoned constituent minerals suggests that this positive feedback between reactions and deformation is associated with cooling from at least 1000°C to 700°C and decompression from 1*0 to 0*5 GPa.
ISSN: 0022-3530

hal-00941293
https://hal.archives-ouvertes.fr/hal-00941293
DOI : 10.1093/petrology/egt039

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigated the structure of the upper mantle beneath southeastern Brazil using teleseismic shear wave splitting measurements. Measurements were performed on seismic data recorded in the Ribeira and Brasilia Neoproterozoic belts, which wrap around the southern termination of the São Francisco craton and disappear westward under the Paraná basin. In the northern Ribeira belt, dominated by thrust tectonics, the fast shear wave polarization planes trend on average N080°E, whereas in the central domain, dominated by strike-slip tectonics, fast shear waves are polarized parallel to the structural trend (N065°E). Stations located above the main transcurrent fault display large delay times (> 2.5 s). Such values, among the largest in the world, require either an unusually large intrinsic anisotropy frozen within the lithosphere, or a contribution from both the lithospheric and asthenospheric mantle. Within the southern Brasilia belt, fast split shear waves are polarized parallel to the structural trend of the belt, at a high angle from the APM. Although part of our data set strongly favors an origin of anisotropy related to a fabric frozen in the lithospheric mantle since the Neoproterozoic, a contribution of the asthenospheric flow related to the present day plate motion is also required to explain the observed splitting parameters.
ISSN: 0012-821X

hal-01389116
http://hal.univ-reunion.fr/hal-01389116
http://hal.univ-reunion.fr/hal-01389116/document
http://hal.univ-reunion.fr/hal-01389116/file/Heintz_SKS_Brazil_EPSL2003_hal.pdf
DOI : 10.1016/S0012-821X(03)00163-8

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A set of synthetic aggregates, containing mixtures of calcite and muscovite, were compacted with varying uniaxial loads ranging from 20 MPa up to 400 MPa. Their elastic properties have been measured using compressional and shear waves in confining hydrostatic pressures up to 475 MPa. Measured seismic velocities are shown to depend on 1) the ratio of calcite to muscovite, 2) the uniaxial load used during sample manufacturing, and 3) the porosity amount prior to velocity measurements. The matrix framework may also affect the seismic velocities, but this effect is not easily quantifiable. In general, measured seismic velocities decrease with increasing muscovite content and porosity. Elastic properties have been calculated based on texture measurements, which were obtained by neutron diffraction. The calculated velocities are based on the calcite and muscovite single crystal elastic tensors, their orientation distribution functions, and their modal fractions. A large discrepancy is apparent between calculated and measured velocities, where the former always overestimate the actual velocities. Shear waves display less of a difference between calculated and measured values, than do compressional waves, indicating that waves propagating by shearing are less affected by sample porosity and matrix framework. A better agreement between measured and calculated seismic velocities arises when the initial porosity is taken into account, using a differential effective medium model. Seismic anisotropy is evident from both measured and calculated velocities, and is low for samples containing pure calcite, but becomes prominent as the muscovite concentration increases. The intensity of anisotropy further depends on the uniaxial load used during sample compaction and the initial porosity.
ISSN: 0148-0227

hal-00512666
https://hal.archives-ouvertes.fr/hal-00512666
DOI : 10.1029/2009JB006523

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use a strike-slip fault analog model to study experimentally the role played by along-fault non-uniform and asymmetric applied normal stress on both coseismic slip and long-term fault behavior. Our model is based on a visco-elasto-plastic multi-layered rheology that allows to produce several hundreds of scaled analog microquakes and associated seismic cycles. Uniform or heterogeneous applied normal stress along the fault plane is imposed and maintained constant during the whole experiment durations. Our results suggest that coseismic slip patterns are strongly controlled by spatial normal stress variations and subsequent accumulated shear stress along fault strike. Major microquakes occur preferentially in zones of major shear stress asperities. Coseismic slip distributions exhibit a pattern similar to the along-fault applied normal stress distribution. The occurrence of isolated low to moderate microquakes where residual stresses persist around secondary stress asperities, indicates that stress conditions along the fault also control the whole variability of fault slip events. Moreover, when fault slip stability conditions are modulated by normal stress distribution, our experiments suggest that the along-fault stress heterogeneity influences the seismic cycle regularity and, consequently, long-term fault slip behavior. Uniform applied normal stress favors irregular seismic cycles and the occurrence of earthquakes clustering, whereas non-uniform normal stress with a single high amplitude stress asperity generates strong characteristic microquake events with stable return periods. Together our results strengthen the assumption that coseismic slip distribution and earthquake variability along an active fault may provide relevant information on long term tectonic stress and could thus improve seismic hazard assessment.
ISSN: 0012-821X

hal-01666379
https://hal.archives-ouvertes.fr/hal-01666379
DOI : 10.1016/j.epsl.2017.10.009