Éditeur(s) : HAL CCSD Geological Society of America
Résumé : orogenic wedges
Interaction between surface and tectonic processes plays a key role in the structural evolution, kinematics, and exhumation of rocks in orogenic wedges. The deformation patterns observed in analog models show that strain partitioning has a strong impact on the vertical component of displacement of tectonic units, which in return favors erosion in domains of important uplift. Partitioning is controlled by tectonic processes and by climate-dependent surface processes, including erosion and sedimentation. The effects of partitioning include localization of deformed domains, exhumation above areas of deep underplating, and steady-state maintenance of wedges for long time periods. Simple models illustrate well how the morphostructural evolution of mountain belts is determined by these complex interactions.
ISSN: 1052-5173

hal-00558931
https://hal.archives-ouvertes.fr/hal-00558931
DOI : 10.1130/GSATG48A.1

Éditeur(s) : HAL CCSD MAIK Nauka/Interperiodica
Résumé : Interaction between surface processes and deep tectonic processes plays a key role in the structural evolution, kinematics and exhumation of rocks in orogenic wedges. The deformation patterns observed in analogue models applied to natural cases of present active or ancient mountain belts reflect several first order processes that result of these interactions. Internal strain partitioning due to mechanical behaviour of a thrust wedge has a strong impact on the vertical component of displacement of tectonic units that in return favour erosion in domains of important uplift. Such strain partitioning is first controlled by tectonic processes, but surface processes exert a strong feed back on wedge dynamics. Indeed, material transfer in thrust wedges not only depends on its internal dynamics, it is also influenced by climate controlled surface processes involving erosion and sedimentation. Effects of erosion are multiple: they allow long term localization of deformed domains, they favour important exhumation above areas of deep underplating and combined with sedimentation in the foreland they contribute to maintain the wedge in a critical state for long time periods. The simple models illustrate well how mountain belts structure, kinematics of tectonic units and exhumation are determined by these complex interactions.
ISSN: 0016-8521

hal-00561361
https://hal.archives-ouvertes.fr/hal-00561361
DOI : 10.1134/S0016852110060075

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We studied the deformation in a partially molten mantle through detailed petrostructural analysis of plagioclase lherzolites from the northwestern part of the central Lanzo massif. These peridotites display a pervasive anastomosed network of millimetre to centimetre-scale plagioclase-rich bands, which grades locally into a planar layering marked by an intercalation of plagioclase-rich and olivine-rich layers up to tens of centimetres wide. Both the anastomosed and the planar layering are subparallel to the deformation fabric, characterized by a foliation defined by the shape-preferred orientation of olivine and by crystal preferred orientation (CPO) of olivine, orthopyroxene, and clinopyroxene. This parallelism, the coexistence of microstructural evidence for melt-rock reactions and for deformation by dislocation creep, and the predominance of axial-[010] olivine CPO patterns, characterized by [010] axes clustered normal to the layering, indicate that deformation and the reactive melt percolation that formed the layering were coeval. Strong heterogeneity in mineral composition in the planar layering domains, with Fe-enrichment in olivine and spinel and highly variable Ti content in spinel in cm-scale plagioclase-rich bands, implies that the latter interacted with higher melt volumes. High Ti contents in pyroxenes and spinel in the anastomosed layering domains point to changes in melt composition, hinting to less effective melt transport. We propose therefore that the planar layering records melt segregation in layers parallel to the shear plane, whereas the anastomosed layering results from melt alignment along grain boundaries subparallel to the shear plane, without segregation. Finite strain in the different layers cannot be quantified, but comparison of the present observations with data from experiments and from other mantle outcrops displaying shear-controlled melt organization suggests that the transition from the anastomosed to the planar layering might record an increase in finite strain, that is, strain localization associated with variations in the instantaneous melt fraction.
ISSN: 0040-1951

hal-01053509
https://hal.archives-ouvertes.fr/hal-01053509
DOI : 10.1016/j.tecto.2014.01.007

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
We describe the structure, microstructure, and petrophysical properties of fault rocks from two normal fault zones formed in low-porosity turbiditic arkosic sandstones, in deep diagenesis conditions similar to those of deeply buried reservoirs. These fault rocks are characterized by a foliated fabric and quartz-calcite sealed veins, which formation resulted from the combination of the (1) pressure solution of quartz, (2) intense fracturing sealed by quartz and calcite cements, and (3) neoformation of synkinematic white micas derived from the alteration of feldspars and chlorite. Fluid inclusion microthermometry in quartz and calcite cements demonstrates fault activity at temperatures of 195degC to 268degC. Permeability measurements on plugs oriented parallel with the principal axes of the finite strain ellipsoid show that the Y axis (parallel with the foliation and veins) is the direction of highest permeability in the foliated sandstone (10-2 md for Y against 10-3 md for X, Z, and the protolith, measured at a confining pressure of 20 bars). Microstructural observations document the localization of the preferential fluid path between the phyllosilicate particles forming the foliation. Hence, the direction of highest permeability in these fault rocks would be parallel with the fault and subhorizontal, that is, perpendicular to the slickenlines representing the local slip direction on the fault surface. We suggest that a similar relationship between kinematic markers and fault rock permeability anisotropy may be found in other fault zone types (reverse or strike-slip) affecting feldspar-rich lithologies in deep diagenesis conditions.
ISSN: 0149-1423

hal-00903428
https://hal.archives-ouvertes.fr/hal-00903428
DOI : 10.1306/03071312127

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Microbathymetry data, in situ observations, and sampling along the 13°20′N and 13°20′N oceanic core complexes (OCCs) reveal mechanisms of detachment fault denudation at the seafloor, links between tectonic extension and mass wasting, and expose the nature of corrugations, ubiquitous at OCCs. In the initial stages of detachment faulting and high-angle fault, scarps show extensive mass wasting that reduces their slope. Flexural rotation further lowers scarp slope, hinders mass wasting, resulting in morphologically complex chaotic terrain between the breakaway and the denuded corrugated surface. Extension and drag along the fault plane uplifts a wedge of hangingwall material (apron). The detachment surface emerges along a continuous moat that sheds rocks and covers it with unconsolidated rubble, while local slumping emplaces rubble ridges overlying corrugations. The detachment fault zone is a set of anostomosed slip planes, elongated in the along-extension direction. Slip planes bind fault rock bodies defining the corrugations observed in microbathymetry and sonar. Fault planes with extension-parallel stria are exposed along corrugation flanks, where the rubble cover is shed. Detachment fault rocks are primarily basalt fault breccia at 13°20′N OCC, and gabbro and peridotite at 13°30′N, demonstrating that brittle strain localization in shallow lithosphere form corrugations, regardless of lithologies in the detachment zone. Finally, faulting and volcanism dismember the 13°30′N OCC, with widespread present and past hydrothermal activity (Semenov fields), while the Irinovskoe hydrothermal field at the 13°20′N core complex suggests a magmatic source within the footwall. These results confirm the ubiquitous relationship between hydrothermal activity and oceanic detachment formation and evolution.
ISSN: 1525-2027

hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973v2/document
https://hal.archives-ouvertes.fr/hal-01571973/file/Escart-n_et_al-2017-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2016GC006775

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : Pervasive melting of the middle crust, as inferred in Tibet and the Altiplano, probably influences the deformation of the lithosphere. To constrain strain distribution in a pervasively molten crust, we analysed the deformation in an eroded analogue of these orogens. The Ribeira-Araçuaí orogen (SE Brazil) comprises a stack of allochthons containing large volumes of anatectic and magmatic rocks. The upper allochton (∼300 km long, 50–100 km wide and >10 km thick) involves peraluminous diatexites and leucogranites resulting from partial melting of the middle crust. It overlies another allochthon containing huge early- to syn-collisional plutons intruding metasediments. Both anatexites and magmatic intrusions display a pervasive strain-induced magmatic fabric. Homogeneous strain distribution suggests inefficient localization. U–Pb ages of ∼575 Ma imply that anatexite melting was synchronous to the early- to syn-collisional magmatism. Similarity in ages magmatic and solid-state fabrics indicates that intrusions and anatexites deformed coherently with solid-state rocks while still molten, in response to a combination of gravity-driven and collision-driven deformation.
ISSN: 0954-4879

hal-00404915
https://hal.archives-ouvertes.fr/hal-00404915
DOI : 10.1111/j.1365-3121.2007.00747.x

Éditeur(s) : PSIC 11 - 11th Pacific Science Inter-Congress : Pacific Countries and their Ocean: Facing Local and Global Changes / 2nd Symposium on French Research in the Pacific. March 2 - 6, 2009 Tahiti, French Polynesia
Résumé : Shrimp farming in New Caledonia relies on the culture of a domesticated strain of Litopenaeus stylirostris introduced from Mexico at a time when genetic principles were of little or no consideration. Since then, advances in agriculture and for some aquatic species of importance led caledonian shrimp farmers to reconsider the appropriateness of a genetic improvement strategy adapted to local biotechnical and economical constraints. This questioning involves many different and interrelated aspects: scientific and technologic (genetics, biosecurity, quarantine, ), economic and organizational (financing, diffusion of genetic improvement) and pedagogic (awareness of farmers). Local institutions, producers associations, research centre and sanitary services associated to carry on the test of a first improvement strategy based on the crossing of different strains of L. stylirostris. This conceptually simple approach aimed at eliminating inbreeding, the first genetic limitating factor of improvement in captive populations. A second domesticated strain was obtained from Hawaii by the caledonian farmers, imported through a quarantine under the control of the zoosanitary local authorities, and reproduced and tested as pure or crossbred stocks by Ifremer within the framework of an interdisciplinary research project financed by caledonian institutions. Present results for hybrids (better growth and survival in the absence of virus) demonstrate the validity of this approach. They also bring out the importance to simultaneously integrate in a development scheme, a breeding centre to maintain and reproduce disease free breeders. This strategy and organization, tested in New Caledonia, could possibly be of benefit to other small scale aquaculture activities in the pacific islands.
La filière crevetticole de Nouvelle-Calédonie s’est développée jusqu’à aujourd’hui à partir d’un stock domestiqué de Litopenaeus stylirostris introduit d’Amérique à une époque où les principes de base en génétique n’étaient pas ou peu appliqués en aquaculture. Les avancées récentes en agriculture et chez quelques espèces aquacoles d’importance mondiale ont conduit les acteurs de cette filière à se poser la question de la mise en place d’une stratégie d’amélioration génétique adaptée aux contraintes biotechniques et économiques locales. Cette réflexion comportait à la fois des aspects scientifiques et technologiques (génétique, biosécurité, quarantaine, conservatoire), économiques et organisationnels (coût de l’opération, modalité de diffusion du progrès attendu), pédagogiques (sensibilisation des fermiers). Des acteurs d’horizons différents (institutions locales, association de producteurs, centre de recherche, police zoosanitaire) se sont associés pour monter une opération de testage d’une première stratégie d’amélioration par croisement de souches de la même espèce. Cette stratégie conceptuellement simple visait l’élimination du premier facteur génétique de limitation des performances d’élevage d’une population captive, à savoir une consanguinité d’autant plus élevée que le nombre de géniteurs fondateurs était faible. Une seconde souche domestiquée a ainsi été acquise à Hawaii par les producteurs calédoniens, contrôlée en quarantaine par les services vétérinaires calédoniens en charge de la réglementation sanitaire, reproduite et testée pure et en croisement par l’Ifremer dans le cadre d’un projet de recherche pluridisciplinaire plus large financé par les institutions du Pays. Les résultats obtenus démontrent l’intérêt de la démarche (meilleure croissance, meilleure survie en l’absence de virus). Mais ils montrent aussi l’utilité d’intégrer simultanément dans le plan de développement de la filière une stratégie de conservation des souches parentales afin de disposer de géniteurs exempts de pathogènes. Cette stratégie et cette organisation testées en Nouvelle-Calédonie pourraient vraisemblablement être profitables à d’autres filières aquacoles modestes, en particulier dans les pays insulaires du Pacifique.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00198/30879/29247.pdf
http://archimer.ifremer.fr/doc/00198/30879/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Yakutat-St. Elias collision in SE Alaska and adjacent Canada represents a prime example of present-day tectonics associated with an indentor corner. Its eastern syntaxis is marked by high exhumation, a sharp structural bend, and strain concentration at the transition from shortening to oblique transpression. Here we present GPS velocity and strain rate fields that cover the syntaxis, including 11 new stations in the core of the St. Elias Mountains. These data are corrected for transient deformation (glacial isostatic adjustment and postseismic and interseismic loading) to produce residual velocities and strain rates representative of long-term tectonics. The main features of these velocity and strain rate fields are a peak in strain rates (strain knot) in the syntaxis at the junction between the main fault systems and a rapid rotation from convergence-parallel to convergence-normal orientations of the velocities and shortening axes around the syntaxis, leading to shortening across the southern Denali Fault. These features are consistent with the strain and tectonic patterns expected near an indentor corner at the transition from shortening to transpression, with a combination of diffuse and localized deformation. The GPS velocities and strain rates show diffuse deformation around the syntaxis, from pure convergence-parallel shortening in the orogenic wedge to oblique extension that accommodates the strain rotation at the front of the syntaxis. This indentor-corner model also results in a near-zero strike-slip rate on the southern Denali Fault and shows no clear evidence for a throughgoing fault hypothesized to link the Fairweather and Totschunda Faults.
ISSN: 0148-0227

hal-01243510
https://hal.archives-ouvertes.fr/hal-01243510
DOI : 10.1002/2014JB011842

Éditeur(s) : HAL CCSD
Résumé : International audience
The geology of the North Pyrenean Zone in the central Pyrenees allows for the observation in the field of theentire section of the Pyrenean rift, from the mantle to the crust and the Mesozoic cover (pre, syn and post rift).The good knowledge we have of the pre-Alpine history of the Pyrenees allows us to properly constrain the Alpinegeological evolution of the pre-Triassic rocks which record both Variscan and Alpine orogenic cycles.The mantle outcrop as kilometric to centimetric fragments of peridotite dispersed within a carbonate metamorphicbreccia. The study of peridotite serpentinisation shows several events of low-temperature serpentinisation, incontact with seawater. In some locallities, we can observe a mixture of fragments of variously serpentinizedperidotites. This suggests a tectonic context where fragments of peridotites from different structural levels weresampled more or less synchronously.The granulitic basement is characterized by a Variscan syndeformational HT event (300-280 Ma). So farwe have not found any trace of a Cretaceous HT event (> 500C). On the other hand, the basement is affectedby a regional metasomatism that began during the Jurassic and became more spatially focused with time until itwas restricted to the Pyrenean rift during the Aptien, Albian and Cenomanian. The talc-chlorite metasomatism(120-95 Ma) shows an evolution from a static toward a syn-deformation hydrothermal event, under a more or lessnormal geothermal gradient. Extensional deformation is recorded by the reworking of several inherited low-angleVariscan tectonic contacts, but also by dispersed high-angle extensional shear zones formed under greenshistconditions.The metamorphic Mesozoic cover of the basement massifs, which constitute the so-called Internal MetamorphicZone, is an allochtonous unit made of lenses of Mesozoic rocks enclosed into the breccia, whichlocally contains peridotite and basement clasts. The Mesozoic metamorphic carbonates show a first phase ofsyn-metamorphic (450-600C, P < 2 kb) ductile deformation, and subsequent phases of folding and fracturing.The datation of neoformed minerals give a 108-85 Ma time span for the metamorphism. We interpret this brecciaas an abandonment breccia which marks the emergence of the main detachment. The basal contact of the Mesozoiccover has a complex 3D geometry traced by Triassic evaporites. It corresponds to a major pre- and synorogenicpolyphased tectonic contact.All these data show a geometrically complex hyper-extended rift where the crust was not stretched under ahigh geothermal gradient but thinned by the tectonic extraction of relatively thin lenses and perhaps cut by highangle low-grade shear zones. The 3D geometry, as well as the strain records and the breccia lithologies stronglysuggest a non-cylindricity for the exhumation process, probably within a transtentional system
Geophysical Research Abstracts
Vienne, Austria

insu-01510371
https://hal-insu.archives-ouvertes.fr/insu-01510371

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The 12 May 2008 the Sichuan earthquake was one of the worst natural disasters in China. Here, we present a detailed picture of the epicentral area inferred geophysical data. Based on the analysis of teleseismic data acquired by a dense seismic network, we highlight an abrupt 20 km Moho offset between the Sichuan Basin and the Tibetan plateau and a horizontal discontinuity at similar to 15 km depth, which may connect with the ruptured zone of the 2008 event. We obtain low mean crustal velocity ratios, which suggest the absence of a thick and extensive zone of partial melt within the crust beneath the eastern part of the Songpan-Garze Terrane. All our data support the idea that the Longmen Shan range mark a zone of active strain localization due to the rigid Yangtze craton resisting eastward displacement of the Tibetan Plateau.
ISSN: 0040-1951

hal-00534471
https://hal.archives-ouvertes.fr/hal-00534471
DOI : 10.1016/j.tecto.2009.11.010

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Analysis of the microstructures in the km-scale mantle shear zone that separates the northern and the central parts of the Lanzo peridotite massif provides evidence of an evolution in time and space of deformation processes accommodating shearing in the shallow mantle within an extensional setting. This shear zone displays an asymmetric distribution of deformation facies. From south to north, gradual reorientation of the foliation of coarse porphyroclastic plagioclase-bearing peridotites is followed by development of protomylonites, mylonites, and mm-scale ultramylonite bands. A sharp grain size gradient marks the northern boundary. Early deformation under near-solidus conditions in the south is recorded by preservation of weakly deformed interstitial plagioclase and almost random clinopyroxene and plagioclase crystal orientations. Feedback between deformation and melt transport probably led to melt focusing and strain weakening in the shear zone. Overprint of melt-rock reaction microstructures by solid-state deformation and decrease in recrystallized grain size in the protomylonites and mylonites indicate continued deformation under decreasing temperature. Less enriched peridotite compositions and absence of ultramafic dykes or widespread melt-impregnation microstructures north of the shear zone and clinopyroxene and amphibole enrichment in the mylonites and ultramylonites suggest that the shear zone acted as both a thermal barrier and a high-permeability channel for late crystallizing fluids. These observations, together with chemical data indicating faster cooling of central Lanzo relative to the northern body, corroborate that this shear zone is a mantle detachment fault. All deformation facies have crystal preferred orientations consistent with deformation by dislocation creep with dominant activation of the (010)[100] and (100)[001] systems in olivine and orthopyroxene, respectively. Dynamic recrystallization produces dispersion of olivine CPO but not a change of dominant deformation mechanism. Evidence for activation of grain boundary sliding is limited to mm-scale ultramylonite bands, where solid-state reactions produced very fine grained polymineralic aggregates. Except for these latest stages of deformation, strain localization does not result from the microstructural evolution; the grain size decrease is a consequence of the need to deform a rock volume whose strength continuously increases because of decreasing temperature conditions. Strain localization in the intermediate levels thus essentially results from the more localizing behavior of both the deep, partially molten, and shallow parts of this extensional shear zone distribution.
ISSN: 1525-2027

hal-00644844
https://hal.archives-ouvertes.fr/hal-00644844
DOI : 10.1029/2011GC003627

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Regional-scale deformation taking place in a strongly anisotropic, yet homogeneous metapelitic protolith during an apparently single tectonic event was systematically investigated as a function of the distance to the main tectonic contact (i.e., the Filabres shear zone, a major detachment in the Betic Cordilleras, Spain). The density of C3' shear bands (or extensional crenulation cleavage) reworking the earlier S2 schistosity increases exponentially towards the contact, in parallel with the decrease in the size of the shear domains. Systematic variations in angles and shape ratios are also reported. Deformation and age patterns, however, suggest that this spectacular trend at least partly results from a progressive localization of the deformation through time. This fossilized shear strain gradient was thus produced somewhat diachronously. Such shear strain patterns nevertheless provide a mean to constrain the rheological properties for such weak lithologies and a mean to better understand crustal deformation.
ISSN: 0191-8141

insu-00545043
https://hal-insu.archives-ouvertes.fr/insu-00545043
https://hal-insu.archives-ouvertes.fr/insu-00545043/document
https://hal-insu.archives-ouvertes.fr/insu-00545043/file/JSGagardetal2.pdf
DOI : 10.1016/j.jsg.2010.11.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oisans Massif, located in the external zones of the western Alps, experienced significant shortening during the Alpine collision. While a series of major top-to-the west shear zones was recently described, the general low grade of the metamorphism has not attracted much petrological and geochronological studies. This paper provides combined temperature and age constraints on the evolution of the Oisans Massif. Temperature was estimated with the Raman Spectrometry of Carbonaceous Material (RSCM) method and chlorite geothermometry. Maximum temperature reached by the Mesozoic cover (Tmax) from Grenoble to the Galibier pass (E-W) and from Saint Jean de Maurienne to Embrun (N-S) yielded almost constant ca. 330 °C temperatures all through the Massif. Temperatures however strongly decrease either westward towards the top of the Vercors sedimentary sequence or eastward towards the Penninic Frontal Thrust. Age constraints were retrieved using 40Ar/39Ar in situ analyses performed on variously strained samples from Alpine shear zones. Over strain gradients, incipient Alpine recrystallizations progressively develop at the expense of former Variscan parageneses. A combined textural and EPMA approach permitted to identify newly formed chlorite and phengite that unequivocally grew in response to deformation or to low grade metamorphism. Chlorites recorded temperatures from ca. 350–150 °C during the activity of shear zones. In parallel, 40Ar/39Ar in situ experiments enabled dating deformation using both synkinematic phengites crystallized below the closure temperature of white-micas and former Variscan muscovite whose isotopic system have been, at least partially re-opened. Activity of top-to-the-west shear zones responsible for the shortening and thickening of the Oisans massif thus occurred between 34 and 33 and 25 Ma. Integrating these new age-constraints, Tmax estimates, and published geological data on the Oisans Massif and neighbouring areas allow proposing a new shortening scenario for the external zones. From ca. 34–33 Ma, the Oisans Massif was buried as a rigid block below more internal units and reached a temperature of ca. 330 °C. Shearing progressively localized along a series of top-to-the-W shear zones in the basement until 25 Ma. Deformation then localized along a major thrust at the base of the ECM massif and propagated along the basement-cover interface below the Vercors massif after 16 Ma.
ISSN: 0264-3707

Droits : info:eu-repo/semantics/OpenAccess
insu-01093878
https://hal-insu.archives-ouvertes.fr/insu-01093878
https://hal-insu.archives-ouvertes.fr/insu-01093878/document
https://hal-insu.archives-ouvertes.fr/insu-01093878/file/GEOD1326RA.pdf
DOI : 10.1016/j.jog.2014.09.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Structural controls are critical during magmatic-to-hydrothermal transition in the formation of intrusion-related gold deposits. They may explain why only some parts of intrusions are mineralized and why only very few intrusions host large deposits. Moreover, most of these gold deposits postdate peak regional metamorphism and were formed in zones of relatively low strain. Indeed, the efficiency of structural gold traps is highest along favourably oriented intrusion/host-rock contacts where mechanical instability maintains high permeability in the cracked thermal aureole. This may be reinforced by melt injections from an underlying root zone. We present a structural analysis of the deformation features of a granite-pluton roof; large-scale dykes and a network of gold veins are intensively developed in this roof, recording a succession of mechanical instabilities. Our gravity survey underlines the presence of a pluton feeder zone located just beneath the mineralized network. It is argued that interferences between regional stress and melt injection in the feeder zone favoured the development of the network by strain located close to the granite roof. This stresses the role of mechanical instabilities triggered by the combined effects of regional stress and melt dynamics in determining the location and size of this type of gold deposit.
ISSN: 0191-8141

insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780/document
https://hal-insu.archives-ouvertes.fr/insu-00914780/file/manuscript.pdf
DOI : 10.1016/j.jsg.2013.11.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We conducted triaxial compression experiments to investigate the effects of pressure, temperature and strain rate on the rheology of talc rocks. The tests were carried out at T from 25 to 860 degrees C, P from 0.1 to 300 MPa, and <(epsilon) over dot> from 0.3 to 30 x 10-5 s(-1). In addition to being very weak, there are other important differences between the mechanical behavior of talc and that of most other silicates. Deformation at all temperatures up to dehydration was accommodated by a combination of crystal plasticity, frictional sliding, and cataclasis. A transition from localized to distributed deformation occurred at P = 300 MPa and T = 400 degrees C, but this transition is ill-defined as both distributed and localized deformation were observed at P = 300 MPa and T = 600 degrees C. Unlike most silicates, both the coefficient of internal friction and the coefficient of (sliding) friction are very low and nearly equal to each other. Temperature enhances plastic deformation (kinking), and inter- and intra-granular microcracks are observed parallel to the (001) planes at all conditions. Voids are created by delamination along (001) planes at kink-band boundaries. Full crystal plasticity was not achieved under any of the conditions tested, i.e., the von Mises criterion was never satisfied. However, the strength of the aggregates remained much less than the confining pressure. These unusual properties are likely a manifestation of the pronounced mechanical anisotropy of talc at the grain scale. At T >= 750 degrees C dehydration is observed, but only along shear zones. These results suggest that feedbacks between deformation and reaction kinetics could control fluid flow in fault zones. The presence of talc can promote significant weakening and strain localization in the oceanic lithosphere, the subducting plate and the overlying mantle wedge. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00492706
https://hal.archives-ouvertes.fr/hal-00492706
DOI : 10.1016/j.epsl.2008.02.004

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Tian Shan Mountains constitute central Asia's longest and highest mountain range. Understanding their Cenozoic uplift history thus bears on mountain building processes in general, and on how deformation has occurred under the influence of the India-Asia collision in particular. In order to help decipher the uplift history of the Tian Shan, we collected 970 samples for magnetostratigraphic analysis along a 4571-m-thick section at the Jingou River (Xinjiang Province, China). Stepwise alternating field and thermal demagnetization isolate a linear magnetization component that is interpreted as primary. From this component, a magnetostratigraphic column composed of 67 polarity chrons are correlated with the reference geomagnetic polarity timescale between ~1 Ma and ~23.6 Ma, with some uncertainty below ~21 Ma. This correlation places precise temporal control on the Neogene stratigraphy of the southern Junggar Basin and provides evidence for two significant stepwise increases in sediment accumulation rate at ~16–15 Ma and ~11–10 Ma. Rock magnetic parameters also undergo important changes at ~16–15 Ma and ~11–10 Ma that correlate with changes in sedimentary depositional environments. Together with previous work, we conclude that growth history of the modern Tian Shan Mountains includes two pulses of uplift and erosion at ~16–15 Ma and ~11–10 Ma. Middle to upper Tertiary rocks around the Tian Shan record very young (<~5 Ma) counterclockwise paleomagnetic rotations, on the order of 15° to 20°, which are interpreted as because of strain partitioning with a component of sinistral shear that localized rotations in the piedmont.
ISSN: 0278-7407

insu-00376345
https://hal-insu.archives-ouvertes.fr/insu-00376345
https://hal-insu.archives-ouvertes.fr/insu-00376345/document
https://hal-insu.archives-ouvertes.fr/insu-00376345/file/2007TC002137.pdf
DOI : 10.1029/2007TC002137

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
This is the first of two papers investigating the mechanical response of cemented granular materials by means of contact dynamics simulations. In this paper, a two-dimensional polydisperse sample with high-void ratio is constructed and then sheared in a simple shear numerical device at different confinement levels. We study the macroscopic response of the material in terms of mean and deviatoric stresses and strains. We show that the introduction of a local force scale, i.e., the tensile strength of the cemented bonds, causes the material to behave in a rigid-plastic fashion, so that a yield surface can be easily determined. This yield surface has a concave-down shape in the mean: deviatoric stress plane and it approaches a straight line, i.e., a Coulomb strength envelope, in the limit of a very dense granular material. Beyond yielding, the cemented structure gradually degrades until the material eventually behaves as a cohesionless granular material. Strain localization is also investigated, showing that the strains concentrate in a shear band whose thickness increases with the confining stress. The void ratio inside the shear band at the steady state is shown to be a material property that depends only on contact parameters.
ISSN: 1539-3755

hal-00523453
https://hal.archives-ouvertes.fr/hal-00523453
DOI : 10.1103/PhysRevE.82.011303

Éditeur(s) : Styli 2003. Trente ans de crevetticulture en Nouvelle-Calédonie. Nouméa - Koné, 2-6 juin 2003. 2004. Gorarant C, Harache Y, Herbland A, Mugnier C. Ed. Ifremer, Actes de Colloque, n°38, pp.113-120
Résumé : Two oyster species are currently present along the French coasts : the indigenous European flat oyster (Ostrea edulis), and the Pacific cupped oyster (Crassostrea gigas), that has been introduced from Japan since the beginning of the 70ies. The flat oyster successively suffered from two protozoan diseases during the 60ies and its production decreased from 20 000 tons/year by that time to 1 500 tons/year nowadays. Consequently, the oyster production is principally (99%) based upon the Pacific oyster species with approximately 150 000 tons/year among which 90% are grown from the natural spat. However, the hatchery production of this species is developing and was estimated to 400 to 800 millions spat in 2002. Moreover, strengthened relationships between IFREMER and the 5 commercial hatcheries, that all joined the SYSAAF (Union of the French poultry, shellfish and fish farming selectors), allow to plan for new genetic breeding programs. At the end of the 80ies, IFREMER initiated a genetic breeding program for the resistance of the European flat oyster to the bonamiosis, and obtained strains more tolerant to this disease. After two generations of massal selection, molecular markers had identified a reduced genetic basis in this program. It was then reoriented to an intra-familial selection. However, we were confronted to a zootechnic problem to manage such a scheme and we compromised by an intra-cohorts of families selection scheme managed using molecular markers. The program has now reached the transfer level with experimentation at a professional scale. Concerning the Pacific cupped oyster, and in parallel with the obtaining and the study of polyploids, performance of different Asian cupped oyster strains were compared to the one introduced in France thirty years ago and currently suffering from summer mortalities. The local strain exhibited better performance, certainly based upon a good local adaptation. In other respects, although early growth is a relevant criteria for selection for growth to commercial stage, it is not to be privileged in the context of an oyster producing region with a limited food availability. Contrary, the spat summer mortality became a priority for numerous teams (genetic, physiology, pathology, ecology,...) joined in the MOREST program. The first results showed important survival differences between fullsib and halsib families. They indicate a genetic determinism to this character "survival" and promote for its selection.
Deux espèces d'huîtres sont aujourd'hui présentes sur les côtes françaises : l'huître plate européenne (Ostrea edulis), indigène, et l'huître creuse du Pacifique (Crassostrea gigas), introduite du Japon dans le début des années 1970. L'huître plate a subi coup sur coup, dans les années 1960, deux maladies dues à des protozoaires parasites et sa production est ainsi passée de 20 000 t/an dans les années 1960 à 1500 t/an aujourd'hui en France. Il en résulte que la filière ostréicole française repose quasiment exclusivement (99%) sur la production de l'huître creuse, C. gigas, avec 150 000 tonnes en 2000 dont environ 90% est issu du captage naturel. Cependant, la reproduction de cette espèce en écloserie est actuellement en expansion avec une estimation de 400 à 800 millions de naissains commercialisés en 2002. Des rapports renforcés entre l'IFREMER et les cinq écloseries françaises de la filière ostréicole, qui adhèrent toutes au SYSAAF (SYndicat des Sélectionneurs Avicoles et Aquacoles Français), permettent désormais d'envisager le développement de nouveaux programmes d'amélioration génétique. A la fin des années 1980, un programme de sélection pour la résistance de l'huître plate à la bonamiose a été initié au sein de l'IFREMER, et a permis d'obtenir des souches plus tolérantes à cette maladie. Après deux générations en sélection massale, les marqueurs moléculaires avaient mis en évidence une base génétique réduite au sein de ce programme qui s'était alors orienté vers une sélection intra-familiale. Devant la lourdeur zootechnique d'un tel schéma, un compromis a été trouvé en réalisant une sélection au sein de cohortes de familles biparentales, la gestion de ces cohortes étant permise par les analyses moléculaires. Le programme est maintenant dans sa phase de transfert, avec des expérimentations à plus grande échelle en partenariat avec la profession. En ce qui concerne l'huître creuse, et en parallèle de l'obtention et l'étude de polyploïdes, les performances de différentes souches d'huîtres creuses provenant d'Asie ont été comparées à celles de la souche introduite en France il y a trente ans, sujette à des mortalités estivales. La souche locale présente de meilleures performances, vraisemblablement grâce à une adaptation bien réalisée. Par ailleurs, bien que l'amélioration de la croissance jusqu'à la taille commerciale s'avère possible par une sélection précoce au stade larvaire, le critère de croissance n'est pas nécessairement à privilégier dans le contexte d'un bassin ostréicole disposant de ressources trophiques limitées. En revanche, les importantes mortalités rencontrées par le naissain en périodes estivales constituent le sujet d'étude prioritaire sur lequel se sont penchées de nombreuses équipes (génétique, physiologie, pathologie, écologie, ...) dans le cadre du grand défi MOREST. Les premiers résultats ont mis en évidence de fortes différences de survie entre des familles biparentales d'animaux indiquant un déterminisme génétique du caractère « survie », et encourageant dans la voie d'une sélection pour ce caractère.

Droits : 2004 Ifremer
http://archimer.ifremer.fr/doc/2003/acte-3491.pdf
http://archimer.ifremer.fr/doc/00000/3491/

Éditeur(s) : HAL CCSD
Résumé : International audience
Two opposing visions of the Aegean backarc tectonics implicitly contain contrasting images of the rheological behaviour of the lihosphere, supported by different sets of observations. The propagation of the NAF and extension in the Corinth Rift suggest a strongly localising rheology whereas the formation of MCC in the Cyclades and the Rhodope suggests instead a more viscous behaviour. This paradox was the seminal question addressed by the ANR-EGEO programme (2007-2010) that leads to the following conclusions: (1) The exhumation of the Cycladic MCC's is accommodated by the N-dipping North Cycladic Detachment System (NCDS) that partly reworks the Vardar suture and at the base by a series of thrusts, including the basal contact of the Cycladic Blueschists (CBS) over the Cycladic Basement (CB). The activity of LANF is due to the reactivation of pre-existing discontinuities such as thrusts or earlier detachments and much less to the interaction with granitic plutons. (2) Exhumation in the Cyclades has proceeded in two stages: (a) Eocene syn-orogenic exhumation within the subduction lower/upperplate interface while the post-orogenic Rhodope MCC formed further north, (b) Oligo-Miocene post-orogenic extension in an MCC mode coeval with syn-orogenic exhumation in Crete and the Peloponnese. (3) Both stages were associated with slab retreat, as early as the Eocene with an acceleration at 30-35 Ma. (4) The localisation of the presently active steeply-dipping normal faults on the southern margin of the Corinth Rift may have been preceded by a partial reworking of thrusts and syn-orogenic detachments by shallow-dipping decollements. (5) The localisation of the NAF in the Marmara Sea region and the Northern Aegean Sea is now accurately dated between 5.3 and 5 Ma Ma using the erosion and deposition surfaces that mark the Messinian salinity Crisis and nannofossils ages. (6) The formation of MCCs in the Cyclades resulted in the draining of the low viscosity lower crust from the northern Aegean Sea and led to an easier coupling between upper mantle and upper crust, easing the localisation and propagation of the NAF. (7) A comparison between crustal and mantle finite strain suggests that mantle flow due to slab retreat controls the stretching of the crust. Our model involves progressive slab retreat and mantle flow below the overriding plate inducing the observed succession of tectonic episodes with a progressive localisation of extension due to several slab tearing events. There is no paradox in the tectonic history and rheological behaviour of the Aegean lithosphere but an evolution of the kinematic boundary conditions due to slab deformation at depth.
American Geophysical Union
San Francisco, United States

insu-00860518
https://hal-insu.archives-ouvertes.fr/insu-00860518
BIBCODE : 2010AGUFM.T13G..04J

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Interactions between deformation and melt percolation yield important consequences for the evolution of the mantle lithosphere, controlling its composition and mechanical behavior. In the Lherz massif (Pyrenees, France), the analysis of structural relationships between harzburgites, lherzolites and pyroxenites and of the crystal-preferred orientations (CPO) of olivine and pyroxenes highlights a strong feedback between percolation of basaltic melts and deformation under near-solidus conditions at the lithosphere–asthenosphere boundary. Elongated harzburgite bodies up to tens of meters wide, which are the remnants of an old lithospheric mantle, preserve a constant foliation. This foliation is locally outlined by cm-scale flattened websteritic lenses. At the contact with the enclosing lherzolites, the harzburgite foliation is crosscut by the lherzolites foliation and by cm-wide websterite bands parallel to the contact. Strain intensity in the lherzolites increases with distance to the harzburgites. Based on these observations, we propose that reactive percolation was synchronous to the deformation and propose that variations in instantaneous melt fraction, due to pyroxenes and spinel crystallization during reactive melt transport, guided strain localization. Accordingly, the observed decrease in olivine CPO intensity and change in CPO patterns from harzburgites to distal lherzolites are interpreted as recording changes in the relative contribution of dislocation glide and diffusion processes, which is ruled by a balance between the instantaneous melt fraction and the local strain rate. We also propose that the pervasive websteritic layering in the refertilized lherzolites may result from deformation-assisted melt segregation in a system with decreasing permeability due to refertilization reactions. Finally, we discuss the possible timing and geodynamical context of the refertilization episode.
ISSN: 0012-821X

hal-00411724
https://hal.archives-ouvertes.fr/hal-00411724
DOI : 10.1016/j.epsl.2008.07.053