Éditeur(s) : HAL CCSD
Résumé : National audience
New experimental data on electrical and anelastic properties of oceanic rocks at high pressures and temperatures are compared with the field data of seismic and electrical anomalies observed at oceanic spreading centers. The laboratory results of electrical conductivity and internal friction on gabbro and peridotites permit to estimate a degree of partial melting and maximum temperature in axial magma chambers (12-15% of melting at 1155-1165°C) and at the upper boundary of a source zone at the depth of 40-90 km (less than 5% of melting in the absence of pyroxene crystals and up to 11-14% in the pyroxene reach rocks at 1360-1370°C) at mid-oceanic ridges.
ISSN: 0934-6554

hal-01322920
http://hal.univ-reunion.fr/hal-01322920

Éditeur(s) : HAL CCSD
Résumé : We present an experimental study of relations between hydraulic properties of clayey rocks and their deformation at bulk and micro scale. The experimentation is based on triaxial deformation of kaolinitic core samples, on permeability measurements, and on several methods of analysis of the microstructure. To produce the samples, remoulded kaolinite material is consolidated by axial loading up to 20 MPa in an oedometric cell. Then, in a triaxial cell, an undrained stress path is applied in order to induce shearing damage in the sample. The permeability of the sample is measured by fluid flow across the sample. Before and after these hydro-mechanical tests, the evolution and the homogeneity of the pore space and moreover the texture of the material are analysed by X-ray tomography, environmental scanning electron microscopy and thermic neutron diffraction. Contrary to expectations, the permeability at the sample scale does not vary significantly, although quite large deformation is reached. The final deformation is heterogeneous, with well-developed shear bands. It appears that the development of compacting and dilating zones generates a heterogeneous permeability field, which results in a negligible variation of the bulk permeability at the sample scale.
International Journal of Rock Mechanics and Mining Science

hal-00496407
https://hal.archives-ouvertes.fr/hal-00496407
DOI : 10.1016/j.ijrmms.2010.04.007

Éditeur(s) : HAL CCSD
Résumé : International audience
Characterizing the hydraulic properties of heterogeneous and complex aquifers often requires field scale investigations at multiple space and time scales to better constrain hydraulic property estimates. Here, we present and discuss results from the site of Ploemeur (Brittany, France) where complementary hydrological and geophysical approaches have been combined to characterize the hydrogeological functioning of this highly fractured crystalline rock aquifer. In particular, we show how cross-borehole flowmeter tests, pumping tests and frequency domain analysis of groundwater levels allow quantifying the hydraulic properties of the aquifer at different scales. In complement, we used groundwater temperature as an excellent tracer for characterizing groundwater flow. At the site scale, measurements of ground surface deformation through long-base tiltmeters provide robust estimates of aquifer storage and allow identifying the active structures where groundwater pressure changes occur, including those acting during recharge process. Finally, a numerical model of the site that combines hydraulic data and groundwater ages confirms the geometry of this complex aquifer and the consistency of the different datasets. The Ploemeur site, which has been used for water supply at a rate of about 106 m3 per year since 1991, belongs to the French network of hydrogeological sites H+ and is currently used for monitoring groundwater changes and testing innovative field methods.
AGU Fall Meeting 2014
San Francisco, United States

insu-01088596
https://hal-insu.archives-ouvertes.fr/insu-01088596

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
Environmental magnetism of speleothems is still in its early stage of development. Here we report on our investigation of the environmental and paleomagnetic information that has been recorded in speleothems, and what are the factors that control its preservation and reliability. To address these issues, we used a multidisciplinary approach, including rock magnetism, petrography, scanning electron microscopy, stable carbon and oxygen isotope compositions, and major and trace element concentrations. We applied this to a set of samples from different stages of speleothem evolution: present-day dripwater (glass plates), a weathered stalactite, a fresh stalagmite, cave sediments, and terra rossa soils. These samples come from the Penico and Excentricas caves, located in two distinct aquifers of the Algarve region, South Portugal. Our results show that the main magnetic carriers of the speleothems under study are primary (detrital) and consist of maghemite (and magnetite?). Similarities in coercivity and temperature dependence of the studied set of samples suggest that iron oxides are inherited from the terra rossa soils that cap the cave and were transported to the speleothems by dripwater. Hence, they represent a regional environmental signature. Interestingly, a stable and probably detrital remanent magnetization could be isolated in the fresh stalagmite, whereas the weathered stalactite yielded chaotic magnetic directions and very low remanent intensities. We propose that these low intensities can be the result from (i) different remanence acquisition mechanisms between stalagmite and stalactite and/or (ii) iron dissolution by fungal activity. We also suggest that magnetic properties and color and the content in detrital elements in the fresh speleothem inform about environmental processes acting on the interface of rock (soil)-atmosphere, while oxygen isotope composition and alkaline-earth element concentrations inform about calcite-water interaction processes. These results provide a better understanding of how environmental information is recorded in speleothems and what the factors are that control the reliability of the paleomagnetic and paleo-environmental signal.
ISSN: 0148-0227

hal-01114953
https://hal.archives-ouvertes.fr/hal-01114953
DOI : 10.1002/2014JB011381

Éditeur(s) : HAL CCSD Springer/Terra Scientific Publishing Company
Résumé : International audience
The laboratory of paleomagnetism of Montpellier (France) has developed a new one-axis vibrating thermal magnetometer dedicated to the Study of physical properties of natural rocks remanence. Among its key characteristics, this apparatus allows both measurement or the magnetization moment on the interval from room temperature to 700 degrees C with a precision of 2 x 10(-9) A m(2) and acquisition of a total or a partial thermo-remanent magnetization using a steady field from - 100 up to 100 mu T. Another point that is worth noting is that one can apply a controlled atmosphere by means of argon flux to prevent oxidation of the studied sample during heating. We report here a technical description of this new instrument and review some specific applications in absolute paleointensity surveys.
ISSN: 1343-8832

hal-00413078
https://hal.archives-ouvertes.fr/hal-00413078
https://hal.archives-ouvertes.fr/hal-00413078/document
https://hal.archives-ouvertes.fr/hal-00413078/file/Poidras-CatVTM.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To test the impact of fluid flow on the reactivity of porous (ultra-)mafic rocks, reactive percolation experiments were realized during which CO2-enriched water was injected at two different injection rates (Q = 0.1 and 1 mL h−1) through sintered analogues of olivine-accumulation zones in basaltic flows at temperature and fluid composition conditions (T = 180 °C; NaHCO3 buffered solution) favorable for CO2-mineralization (carbonation).All experiments resulted in silicate dissolution, carbonate precipitation upstream and (proto-)serpentine formation downstream indicating a decrease in the fluid reactivity along flow paths. The measured bulk carbonation rates ranged from 4 to 7 × 10−8 s−1; these values were significantly lower than previously published values of olivine carbonation rate obtained on powders in closed batch and flow-through reactors. Our study show complex couplings, at pore scale, between fluid flow, localization of reaction zones, and chemical reaction kinetics which in turn control hydrodynamic properties, carbonation rate and efficiency and fluid reactivity. This results in carbonation rates being higher when injection rates are high and permeability ultimately controlling carbonation reactions by limiting fluid input. During experiments, notable changes in permeability occurred for only minor changes in porosity indicating a control by the geometry of the porous network: heterogeneities in the distribution of flow paths favored the localization of precipitated minerals which in turn resulted in the closure of flow paths. This mechanism was particularly efficient at low injection rates. These results imply that controlling the injection rate could allow enhancing/limiting the efficiency of in situ carbonation.
ISSN: 0883-2927

hal-01115284
https://hal.archives-ouvertes.fr/hal-01115284
DOI : 10.1016/j.apgeochem.2014.11.024

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Displacement-length data from dilatant fractures (joints, veins, igneous dikes) and several varieties of deformation bands were analyzed statistically to investigate the applicability of mechanical models proposed for their formation. All 17 datasets are generally consistent with equilibrium or long-term power-law slopes on the displacement-length diagram of either 1.0 or 0.5. Similar to many faults, disaggregation deformation bands are consistent with a power-law scaling relation having a slope of approximately c = 1, implying a linear dependence of maximum displacement and discontinuity length (Dmax = γL). In contrast, dilatant fractures, cataclastic deformation bands, and shear-enhanced compaction bands are consistent with a power-law scaling relation with a slope of approximately c = 0.5, implying a dependence of maximum displacement on the square root of length (Dmax = αL1/2). The scaling relations represent an average, or long-term equilibrium outcome of deformation for conditions such as length-scale, time-scale, temperature, chemistry, and an effectively homogeneous far-field stress field, allowing for variations such as rapid and/or localized behaviors. The displacement-length scaling of these geologic structures follows systematic relationships that provide information on host-rock properties and the physics of fracture and deformation-band propagation.
ISSN: 0191-8141

hal-00818130
https://hal.archives-ouvertes.fr/hal-00818130
DOI : 10.1016/j.jsg.2012.12.005

Éditeur(s) : HAL CCSD
Résumé : This study provides additional constraints on the relations between deformation, hydration and percolation of fluids and melts in the subcontinental lithospheric mantle beneath a craton and a rift, as well as their implication on its geodynamical behaviour. I have analysed the microstructures, the CPOs, and the hydrogen content of mantle xenoliths from the Kaapvaal craton, and two sets of xenoliths from different localities along the East African Rift (North Tanzanian Divergence and SE Ethiopia).The coarse-granular microstructures and the well-defined CPOs in Kaapvaal peridotites suggest a deformation followed by a long quiescence time. Orthorhombic olivine CPOs predominates, but axial-[100] and axial-[010] are also measured. Cratonic peridotites record multiple metasomatic episodes, leading to a significant compositional heterogeneity, which cannot be imaged by seismic studies. Olivine hydrogen contents are variable, but tend to increase until 150 km depth, reaching up to 50 ppm wt. H2O. The deeper samples are almost dry. Piston-cylinder experiments on hydrogen diffusion between a volatile-rich kimberlitic melt and forsterite suggest that the presence of CO2 in the system could significantly decrease water fugacity and thus forsterite hydration. These experimental results indicate that the hydrogen contents measured in olivine were acquired during a metasomatic event rather than during xenolith extraction by kimberlites. However, this metasomatism was not followed by remobilization of the cratonic root.In the North Tanzanian Divergence, localities within the rift axis and the volcanic transverse belt (Lashaine and Olmani) show significant differences in microstructures and olivine CPO patterns. In Lashaine, coarse-granular microstructures and orthorhombic to axial-[100] CPO patterns in olivine can be explained by transpressional deformation during the formation of the Mozambique belt, or by the occurrence of a remnant of a cratonic domain embedded within the Mozambique belt. Within the rift axis, porphyroclastic to mylonitic microstructures suggest a recent rift-related deformation accompanied by syn-kinematic melt-rock reactions, and followed by variable annealing. The strong heterogeneity in microstructures and olivine CPO suggests that this deformation was acquired during multiple tectonic events probably linked to episodic magma percolation, separated by quiescence episodes. The axial-[100] patterns in olivine and the oblique fast directions reported by SKS studies are coherent with transtensional deformation within the lithospheric mantle beneath the rift.The peridotites from SE Ethiopia are less recrystallized than the rift-axis Tanzanian peridotites, displaying coarse-porphyroclastic microstructures. Microstructures and orthorhombic CPOs in olivine suggest syn- to post-metasomatic deformation. S-waves polarization anisotropies calculated for these samples cannot explain alone the delay times reported by SKS studies in this part of the East-African Rift.
Les travaux réalisés durant cette thèse apportent de nouvelles contraintes sur les relations entre déformation, hydratation et percolation de fluides et/ou de magmas dans le manteau subcontinental sous un craton et sous un rift, et leurs implications sur son comportement rhéologique. Il repose sur l'analyse des microstructures, des OPRs et des teneurs en hydrogène de xénolites mantelliques du craton du Kaapvaal, et sur deux séries de xénolites provenant de différentes localités le long du rift Est-Africain (Divergence Nord Tanzanienne et SE de l'Ethiopie). Les microstructures granulaires à gros grains et les OPRs bien définies des péridotites du craton du Kaapvaal sont cohérentes avec un épisode de déformation suivi d'une longue période de quiescence. Les OPRs de l'olivine sont majoritairement à symétrie orthorhombique, mais des symétries axiale-[100] et axiale-[010] sont aussi mesurées. Les péridotites cratoniques enregistrent de multiples épisodes métasomatiques, ayant entraîné une hétérogénéité de compositions à petite échelle ne pouvant être détectée par les études sismiques. Les teneurs en hydrogène mesurées dans l'olivine sont variables, mais ont tendance à augmenter jusqu'à 150 km de profondeur, atteignant alors jusqu'à 50 ppm wt. H2O. En dessous de cette profondeur, les échantillons montrent des teneurs en hydrogène très faibles. Les expériences réalisées en piston-cylindre sur la diffusion de l'hydrogène issue d'un liquide kimberlitique vers de la forstérite suggèrent que la fugacité en eau pourrait fortement être diminuée par la présence de CO2, empêchant l'hydratation de l'olivine durant extraction des xénolites par les kimberlites. Ces résultats expérimentaux suggèrent que les teneurs en hydrogène dans l'olivine des péridotites du craton du Kaapvaal ont été acquises durant un épisode métasomatique en profondeur et non pendant leur extraction par les kimberlites. Ces teneurs n'ont toutefois pas à ce jour entraîné de remobilisation de la racine cratonique. Enfin, le calcul des propriétés sismiques des péridotites cratoniques révèle que les anisotropies générées par les OPRs de ces échantillons sont suffisantes pour expliquer les anisotropies mesurées par les ondes SKS et les ondes de surface.Les xénolites de la Divergence Nord-Tanzanienne, montrent des variations significatives de microstructures et d'OPR de l'olivine entre les péridotites des localités dans l'axe du rift et celles de la chaîne volcanique transverse (Lashaine et Olmani). A Lashaine, les microstructures granulaires à gros grains et les OPRs de type orthorhombique et axial-[010] peuvent être expliquée par une déformation en transpression liée à la formation de la chaîne Mozambique ou par la présence d'une relique d'un domaine cratonique à l'intérieur de la chaîne Mozambique. Dans l'axe du rift, les microstructures porphyroclastiques à mylonitiques suggèrent une déformation plus récente, accompagnée de réactions magma-roche sous des conditions proches du solidus, suivie d'un recuit variable. L'hétérogénéité des microstructures enregistrées par les échantillons du rift suggère de multiples épisodes de déformation localisée, probablement liés à l'injection percolation épisodique de magmas, espacés de périodes d'accalmie. Les OPRs de l'olivine de type axial-[100] et l'orientation des directions de polarisation des ondes SKS suggère que le rift s'est formé en régime de transtension Les péridotites du Sud-Est de l’Éthiopie présentent des microstructures porphyroclastiques à gros grains moins recristallisées qu'en Tanzanie. Les microstructures et les OPRs principalement de type orthorhombique suggèrent une déformation syn- à post-métasomatisme. Les anisotropies de polarisation des ondes S calculées pour ces échantillons sont insuffisantes pour expliquer à elles seules les déphasages des ondes SKS dans cette partie du rift.
https://tel.archives-ouvertes.fr/tel-01684759

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2014MON20139
tel-01684759
https://tel.archives-ouvertes.fr/tel-01684759
https://tel.archives-ouvertes.fr/tel-01684759/document
https://tel.archives-ouvertes.fr/tel-01684759/file/43443_BAPTISTE_2014_archivage_cor.pdf

Éditeur(s) : HAL CCSD Mineralogical Society
Résumé : The diagenetic evolution of the magnetic minerals during burial in sedimentary basins has been recently proposed. In this study, we provide new data from the Grès d’Annot basin, SE France. We analyze fine-grained clastic rocks that suffered a burial temperature from ~60 to >250 °C, i.e., covering oil and gas windows. Low temperature magnetic measurements (10–300 K), coupled with vitrinite reflectance data, aim at defining the magnetic mineral evolution through the burial history. Magnetite is documented throughout the entire studied transect. Goethite, probably occurring as nanoparticles, is found for a burial temperature <80 °C. Micron-sized pyrrhotite is highlighted for a burial temperature >200 °C below the Alpine nappes and the Penninic Front. A model of the evolution of the magnetic assemblage from 60 to >250 °C is proposed for clastic rocks, containing iron sulfides (pyrite) and organic matter. This work provides the grounds for a better understanding of the magnetic properties of petroleum plays.
ISSN: 0009-8558

hal-01122812
https://hal.archives-ouvertes.fr/hal-01122812
DOI : 10.3390/min4030667

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Secondary migration is defined as the movement of hydrocarbons through relatively permeable rocks from source to trap: a two-phase flow within a porous medium. Depending on the geometry and capillary pressure distributions of carrier beds, secondary migration has both vertical and lateral components. The present paper focuses on that part of the migration where the movement is mainly vertical. Its objective is to propose a description of the dynamics governing the vertical part of secondary migration based on the main physical aspects of two-phase flow in a homogeneous porous medium. The study is illustrated by laboratory observations performed in a vertical, 2-D Hele-Shaw cell filled with a transparent porous medium where the flow of dyed oil invading a wetting fluid is visually observed. These observations help us to understand the effect of buoyant, capillary and viscous forces on the resulting flow, the relative importance of which is characterized by non-dimensional numbers. Extrapolating these observations to natural media, it is proposed that vertical secondary migration can be described as a percolation of disconnected and vertically-elongated stringers. These stringers do not move continuously but as a succession of snap-off and re-feeding events which result in a jerky upward movement. Using parameters characterizing the physical properties of the fluid and of the porous medium, the geometry and the dynamic behavior of the stringers are estimated. The width of stringers occurring during secondary migration in geological media is centimetric and their vertical size ranges from several centimeters to a few meters. An upper limit of the mean upward velocity of stringers is proposed, as well as an estimate of their spatial density and of the minimum, average horizontal distance (decametric) between two stringers. The stringers are sparsely distributed, resulting in a low average oil loss and a high efficiency of the vertical migration process.
ISSN: 0264-8172

hal-00831370
https://hal.archives-ouvertes.fr/hal-00831370
https://hal.archives-ouvertes.fr/hal-00831370/document
https://hal.archives-ouvertes.fr/hal-00831370/file/pekins-V-edited.pdf
DOI : 10.1016/j.marpetgeo.2013.04.020

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Mobile-immobile mass transfer is widely used to model non-Fickian dispersion in porous media. Nevertheless, the memory function, implemented in the sink/source term of the transport equation to characterize diffusion in the matrix (i.e., the immobile domain), is rarely measured directly. Therefore, the question can be posed as to whether the memory function is just a practical way of increasing the degrees of freedom for fitting tracer test breakthrough curves or whether it actually models the physics of tracer transport. In this paper we first present a technique to measure the memory function of aquifer samples and then compare the results with the memory function fitted from a set of field-scale tracer tests performed in the same aquifer. The memory function is computed by solving the matrix diffusion equation using a random walk approach. The properties that control diffusion (i.e., mobile-immobile interface and immobile domain cluster shapes, porosity, and tortuosity) are investigated by X-ray microtomography. Once the geometry of the matrix clusters is measured, the shape of the memory function is controlled by the value of the porosity at the percolation threshold and of the tortuosity of the diffusion path. These parameters can be evaluated from microtomographic images. The computed memory function compares well with the memory function deduced from the field-scale tracer tests. We conclude that for the reservoir rock studied here, the atypical non-Fickian dispersion measured from the tracer test is well explained by microscale diffusion processes in the immobile domain. A diffusion-controlled mobileimmobile mass transfer model therefore appears to be valid for this specific case.
ISSN: 0043-1397

insu-00373705
https://hal-insu.archives-ouvertes.fr/insu-00373705
https://hal-insu.archives-ouvertes.fr/insu-00373705/document
https://hal-insu.archives-ouvertes.fr/insu-00373705/file/Gouze_et_al-2008-Water_Resources_Research.pdf
DOI : 10.1029/2007WR006690

Éditeur(s) : HAL CCSD GIA - Gemological Institute of America
Résumé : A new opal deposit was discovered in 2008 near the village of Wegel Tena, in volcanic rocks of Ethiopia's Wollo Province. Unlike previous Ethiopian opals, the new material is mostly white, with some brown opal, fire opal, and colorless "crystal" opal. Some of it resembles Australian and Brazilian sedimentary opals, with play-of-color that is often very vivid. However, its properties are consistent with those of opal-CT and most volcanic opals. Inclusions consist of pyrite, barium-manganese oxides, and native carbon Some samples show "digit patterns", interpenetrating play-of-color and common opal, resembling fingers. The opaque-to-translucent Wegel Tena opals become transparent when soaked in water, showing a remarkable hydrophane character. White opals from this deposit contain an elevated Ba content, which has not been reported so far in opal-CT. The fire and crystal opals are prone to breakage, while the white, opaque-to-translucent opals are remarkably durable. The proportion of gem-quality material in the Wegel Tena deposit seems unusually high, and 1,500 kg have already been extracted using rudimentary mining techniques. The deposit may extend over several kilometers and could become a major source of gem-quality opal
ISSN: 0016-626X

hal-00560177
https://hal.archives-ouvertes.fr/hal-00560177

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Phyllosilicate content and related permeability of fault zones form primary controls on hydraulic and mechanical behavior of the brittle crust. Hence, understanding and predicting the localization of these ubiquitous minerals is a major issue for fundamental and applied geosciences. We describe normal fault zones cutting a foreland arkosic turbiditic formation suffering high-T diagenesis and formed under conditions (~200°C) typical of deeply buried reservoirs and common within the seismogenic interval. Microstructural analyses show a large proportion of phyllosilicates (up to 34%) in the fault rock, derived from near-complete feldspar alteration and disaggregation during deformation. This study shows that even faults with offsets (~20 cm) much lower than bed thickness can have such large feldspar-to-phyllosilicate transformation ratios, implying that the origin of the phyllosilicates is purely transformation related. These results imply that the potential sealing capacity and strength of faults could be predicted from the host rock feldspar content. Where sealing capacity and fault strength can be related to phyllosilicate content, these properties can then also be inferred from the predicted phyllosilicate content: this opens up new horizons concerning the hydraulic and the mechanical behavior of the upper crust.
ISSN: 0094-8276

hal-00903574
https://hal.archives-ouvertes.fr/hal-00903574
DOI : 10.1002/grl.50829

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The mylonitic Cambrian quartzites, Moine Thrust Zone, NW Scotland, have long been used to study microstructural and petrofabric evolution and to develop understanding of grain-scale processes accommodating large-scale displacements. Today, structural geology is entering a new age of understanding of the basic processes involved in microstructural evolution due to the emergence of novel instrumental techniques and theoretical models. It seems apposite therefore to re-evaluate the microstructure of one example of this classic quartz mylonite from the Stack of Glencoul, Assynt, using arguably the most important of these new techniques, electron backscattered diffraction (EBSD). The three-dimensional (3D) microstructure and petrofabric of this rock was analysed using EBSD, to: 1) corroborate previous optical and X-ray texture goniometry measurements; 2) investigate the potential for sampling and/or tectonic sectioning bias that may be introduced inadvertently into any petrofabric analysis; and 3) predict its seismic properties. It is found that microstructures do differ between orthogonal structural sections, leading to variations in strengths of different components in the overall petrofabric that might impact on seismic properties. The results emphasize the true 3D nature of microstructures and petrofabrics, which can be recognized and accommodated more readily by this new generation of analytical techniques.
Continental Tectonics and Mountain Building: The Legacy of Peach and Horne

hal-00565749
https://hal.archives-ouvertes.fr/hal-00565749

Éditeur(s) : HAL CCSD GeoScienceWorld
Résumé : International audience
Due to their "iron-loving" properties, platinum-group elements (PGE) are expected to be stored in the Earth's core. Although very low, at a few parts per billion, PGE concentrations measured in mantle-derived rocks are too high to be in chemical equilibrium with the core. The "late veneer" model offers the best explanation for this paradox-it postulates that a flux of primitive meteorites hit the early Earth after core formation had ceased. However, the inferred PGE composition of the hypothetical primitive mantle exhibits slight positive excesses of Ru, Rh, and Pd compared to the canonical chondritic signature. Such deviations have trigger debate about the composition of the late veneer and the extent of reworking of PGE signatures by igneous processes within the Earth's mantle.
ISSN: 1811-5209

hal-00411483
https://hal.archives-ouvertes.fr/hal-00411483
DOI : 10.2113/GSELEMENTS.4.4.247

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fault friction is a parameter that is difficult to assess along fault zones since its determination depends on the knowledge of any factor controlling the state of stress around faults. In brittle homogeneous rocks, a limited number of these factors, such as the shape of the fault surface, the vicinity of fault tips or the remote stress ratio, are crucial to constrain for this determination. In this paper, we propose to analyse a field example in which all these properties are met and where the nature of the slipped structure suggest differences in static friction. We compare the orientations of branching fractures at strike-slip relay zones between en echelon stylolites and en echelon joints both reactivated in shear. The field data are compared with both photoelastic and 3-D numerical models that consider the remote stress conditions and the role of the geometry of the strike-slip segments. Based on field observations, these analyses quantitatively demonstrate the significant role of fault friction on the local stress field orientation and subsequent fracture formation. This work points out that estimations of fault friction based on analyses of fracture patterns or in situ stresses must be accompanied with a thorough investigation of the 3-D fault shape, its segmentation and the remote stress state.
ISSN: 0191-8141

hal-00560999
https://hal.archives-ouvertes.fr/hal-00560999
DOI : 10.1016/j.jsg.2010.01.008

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The outstanding exposure of deformation bands in a multilayer sequence of the Orange quarry, Provence, France, motivates a study investigating the development and controls of deformation band geometries by field mapping combined with finite element modeling. Field mapping yields new insights into angular relations between, and evolution of, the deformation bands as well as provides input parameters for the setup and boundary conditions of the numerical simulations using ADELI 2D. In particular, reverse-sense deformation bands are found to have developed within three of the four exposed layers of the multilayer stack with similar orientations to bedding, indicating layer-parallel contraction. Numerical simulations, carried out as a parametric study to investigate the influence on deformation band development and geometry, successfully reproduce the sequential development of deformation bands in the three layers as seen in the field as well as recreate the observed angular geometries of similar to 39 degrees to the maximum compression. This angular relationship is put into context with observations from other field studies and theoretical values to explore controls of deformation band orientations. Furthermore, band localization is impeded in the model by increased layer cohesive strength, demonstrating the importance of host-rock property variations on where localization of bands within the multilayer sequence. Results from both field investigation and numerical simulations are consistent with regional tectonics, where the strata underwent gentle folding due to thrust faulting at depth, and bring further insight into the development and geometry of deformation bands in both extensional and contractional tectonic regimes.
ISSN: 0148-0227

hal-00639452
https://hal.archives-ouvertes.fr/hal-00639452
DOI : 10.1029/2011JB008365

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The anisotropic single crystal seismic properties are reviewed in the light of recent experimental and theoretical determinations. Although considerable progress has been made on the determination of single crystal properties, data are still lacking, particularly for the temperature derivatives of transition zone and lower mantle phases. The common types of LPO of olivine, opx and cpx are presented together with their associated seismic properties. It is emphasized that simple seismic symmetry pattern of upper mantle rocks are a direct result of the interaction of olivine, opx and cpx. Using the standard structural frame (X lineation, Z pole to foliation) for typical LPOs of olivine, opx and cpx have the maximum Vp parallel to X, in the XZ plane and parallel to Y respectively. Destructive interference occurs between these minerals and hence P-wave anisotropy should be sensitive to the aggregate composition. For shear wave splitting (dVs) typical olivine and opx LPOs result in similar patterns with the maximum dVs in the YZ plane and the fast split shear wave (Vs1) polarized parallel to the foliation. A typical cpx LPO on the other hand produces destructive interference as the max dVs is close to X. By comparison with experiments and numerical simulations, it is estimated that upper mantle samples have an olivine LPO strength which recorded shear strain gamma of between 0.25 and 2.0. Pyrolite and piclogite models are compared with global transverse isotropic models. The slowly reducing P-wave anisotropy in the first 200 km can be explained by a model with constant composition and LPO strength. The sharp decrease in the observed anisotropy in the global models cannot be explained by the transformation of opx to cpx at 300 km, it is proposed that this decrease is due to a reduction in LPO strength from 200 to 350 km at the base of the lithosphere.
Earth's Deep Interior: Mineral Physics and Tomography From the Atomic Scale to the Global Scale

ISBN : 9780875909752
hal-01391524
http://hal.univ-reunion.fr/hal-01391524
http://hal.univ-reunion.fr/hal-01391524/document
http://hal.univ-reunion.fr/hal-01391524/file/Mainprice_AGUmonog_DM_GB_WBI_2000.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
One of the main difficulties encountered when characterizing the hydrodynamic properties of a fractured aquifer is to identify the preferential flow paths within it. Different methods may be applied to determine the variability of the permeability at the borehole scale and to image the structure of the main flow zones between boreholes. In this paper, we compare the information obtained from different measurement techniques performed in a set of three 100 m depth wells (well-to-well spacing: 5­10 m) in a fractured crystalline rock setting. Geophysical logging and borehole-wall imaging are used to identify open and closed fractures intersecting the boreholes and their orientation. The comparison with flowmeter and single packer tests shows that few of the fractures interpreted as open from geophysical logs are significantly transmissive. Cross-borehole connectivity is first investigated from single packer tests with pressure monitoring in adjacent boreholes. To determine fracture zone connectivity, we propose a methodology simply based on the variation with packer depth of the ratio of the drawdown in the observation well and the drawdown in the pumping well. The results are compared to the analysis of cross-borehole flowmeter tests. We show that both methods provide consistent results with a similar level of information on connectivity.
ISSN: 0022-1694

insu-00221380
https://hal-insu.archives-ouvertes.fr/insu-00221380
DOI : 10.1016/j.jhydrol.2007.07.007

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
The hydrogen content of nominally anhydrous minerals is of great interest, because it can influence many physical and mechanical properties of mantle rocks. Moreover, the hydrogen diffusion profiles can be used to constrain timescales related to magma eruptions. Here, we report models of ionic diffusion for trace elements in anisotropic crystals and apply them to hydrogen diffusing out of mantle-derived olivine. We first compare and discuss the characteristics of 1D and 3D models and show that only 3D anisotropic diffusion models can lead to diffusion profiles exhibiting non-equilibrium plateau at the center of the solid along the slowest axis, as measured in natural samples. In a second part, we discuss the differences between hydration and dehydration of olivine for diffusion that is linked to two different atomic sites involved in hydrogen mobility. Finally, we apply our 3D anisotropic model to previous results on mantle-derived olivine from Pali-aike to better characterize diffusion coefficients and their anisotropy that could be relevant for dehydration of olivine. Our results show that dehydration has to be strongly anisotropic, with a fast [100] axis and a significantly slower [001] axis.
ISSN: 0342-1791

hal-01115253
https://hal.archives-ouvertes.fr/hal-01115253
DOI : 10.1007/s00269-014-0685-x