Éditeur(s) : HAL CCSD
Résumé : The territory of Armenia was located in the collision zone between Arabia and Eurasia, and is the seat of active intercontinental deformations, which was attested by the many historical earthquakes that have occurred in this region. All these destructive earthquakes show a strong regional seismic activity, and therefore it is important to evaluate the seismic hazard associated with active structures that generates this seismicity.This study presents the results of the analysis of the active tectonics within the northwestern and southeastern extensions of the Pambak-Sevan-Syunik fault (PSSF), a major right-lateral strike-slip fault cutting through Armenia (NW - SE). Quantifying the deformations in terms of geometry, kinematics, slip rates and earthquake activity, using cosmogenic 3He, OSL/IRSL and radiocarbon dating techniques, reveal different behaviors between the two regions.Within the northwestern extension, in the region of Amassia, the PSSF bends to the west and splits into two main WNW-ESE trending reverse faults defining a compressional pop-up structure. We estimate an uplift rate and a shortening rate of 0.5 ± 0.1 mm/y and 1.4 ± 0.6 mm/y, respectively. This suggests that most of the ~2 mm/y right lateral movement of the PSSF seems to be absorbed within the Amasia pop-structure.Within the southeastern extension, in the region of Tsghuk volcano, the PSSF shows signs of dying out at the southernmost tip of the Syunik graben. A very slow NS trending normal faulting associated with a slight right-lateral movement characterizes the tectonic activity in the region of Tsghuk volcano. We estimate vertical slip rates, EW stretching rate, and right-lateral slip rate of ~0.2 mm/y, ~0.1 mm/y and ~0.05 mm/y, respectively. These results lead to the conclusion that the right lateral movement observed further north along the PSSF is mainly transferred within other active faults further west within the Karabagh (Hagari fault or other structures further northwestwards).
L’Arménie se situe dans la zone de collision entre Arabie et Eurasie et est le siège d’une déformation intracontinental active comme l’atteste les nombreux tremblements de terre historiques qui s’y sont produits. Tous ces séismes, destructeurs, attestent d’une forte activité sismique régionale, et il est par conséquent important d'évaluer l’aléa sismique associé aux structures actives qui génère cette sismicité.Le travail présenté ici, expose les résultats de l’analyse de la tectonique active au niveau des terminaisons nord-ouest et sud-est de la faille de Pambak-Sevan-Syunik (PSSF), une des failles décrochant majeure qui traverse l'Arménie du NW au SE. La quantification des déformations en termes de géométrie, cinématique, vitesse de glissement et paléosismicité, en utilisant les méthodes de datation 3He cosmogénique, OSL/IRSL et radiocarbone, révèlent des comportements différents entre les deux régions.Au niveau de la terminaison nord-ouest, dans la région d’Amassia, la faille PSSF s’incurve vers l'ouest et se subdivise en deux branches de direction WNW-ESE, et de cinématique inverse, définissant une structure en pop-up. Nous estimons une vitesse de soulèvement de 0.5 ± 0.1 mm/an et une vitesse de raccourcissement NNE-SSW de 1.4 ± 0.6 mm/an. Ces résultats suggère que l’essentiel des ~2 mm/an de mouvement dextre estimés le long de la faille de PSSF sont absorbés au niveau du pop-up d’Amassia.Au niveau de la terminaison sud-est, dans la région du volcan Tsghuk, la faille PSSF semble disparaitre. Le peu d’activité tectonique est caractérisée par des failles normales sub-méridiennes associées à une légère composante décrochant dextre. Nous déterminons une vitesse de glissement vertical de ~0,2 mm/an, une vitesse d’extension ~EW de ~0,1 mm/an associée à une composante dextre de ~0,05 mm/an. Ces résultats suggèrent que le mouvement dextre observé le long de la faille de PSSF plus au nord, a été transféré sur d'autres failles plus à l'ouest dans le Karabakh (faille Hagari ou autres structures situés encore plus au NW).
https://tel.archives-ouvertes.fr/tel-01621440

NNT : 2016MONTT152
tel-01621440
https://tel.archives-ouvertes.fr/tel-01621440
https://tel.archives-ouvertes.fr/tel-01621440v2/document
https://tel.archives-ouvertes.fr/tel-01621440/file/2016_MKRTCHYAN_archivage.pdf

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
The long-lived Andean subduction zone underwent several flat slab episodes and is therefore ideal to study the consequences of a complete cycle of slab flattening and steepening on the upper plate deformation pattern. In the modern Peruvian forearc (15°–17°S), slab flattening caused a Paleogene (52–30 Ma) landward migration of volcanic activity. Combining structural geology and a source-to-sink thermochronological study, we show that the flat slab period is contemporaneous with uplift accommodated by large-scale crustal extension in the forearc. In this light, we argue that the study area is an ancient analog to the modern Mexican and northern Peruvian forearcs located above modern flat slab segments and currently undergoing widespread extension.
ISSN: 0091-7613

hal-01685553
https://hal.archives-ouvertes.fr/hal-01685553
DOI : 10.1130/G38990.1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
In Taiwan, about one third of the lithospheric plate convergence between Eurasia and the Philippine Sea plate is accommodated on the eastern coast across the narrow Longitudinal Valley (LV). The Longitudinal Valley Fault (LVF) is the main seismically active fault zone in this region. However, the spatial distribution of ground deformation due to interseismic loading on locked fault segments remains widely unknown. To address this problem, we use a "permanent scatterer" (PS) interferometric synthetic aperture radar (InSAR) approach for processing the ERS satellite archives. The PS mean velocity maps allow accurately mapping and quantifying the ground deformation all along the LV. Assuming that, close to the surface, the fault plane along the central LVF creeping segment dips 55 degrees to the east, we derive a slip vector at the surface of similar to 25 mm/yr with a mean rake of 70 degrees. In agreement with our PS observations, shallow seismicity indicates a clear change in the fault mechanical behavior of the creeping segment around Fuli town. Finally, we propose a combination of the PS velocity fields for estimating a 3-D map of ground deformation. In the southern part of the LV, the vertical component reveals an uplift of the Coastal Range with respect to the LV of similar to 10 mm/yr. Moreover, between Taitung and Luyeh, the vertical deformation is essentially accommodated along the Luyeh Strand. Finally, north of Rueisuei, the Coastal Range uniformly subsides at similar to 15 mm/yr relative to the western side of the LV. However, a local uplift pattern is detected around latitude 23 degrees 42'.
ISSN: 0148-0227

hal-00595532
https://hal.archives-ouvertes.fr/hal-00595532
DOI : 10.1029/2010JB007898

Éditeur(s) : HAL CCSD
Résumé : In order to identify and quantify the Rif (Morocco) present-day deformation, especially those related to active faults (location, geometry, kinematic), we perform a morphotectonic study. The studied area and faults are located in the Northern part (conjugate faults of Al-Hoceima Bay: Trougout, Boujibar and Rouadi), the Eastern part (Nekor fault) and the Southern part of the chain (Rif frontal thrust between Fes and Meknes cities).Morphotectonic tools (DEMs at different scales, satellite and aerial pictures), field studies and Quaternary dating methods (U/Th, OSL, 14C and in-situ cosmogenic isotopes 10Be, 3He, 36Cl) allow us to characterize transtensional deformation in the Northern Rif. Horizontal and vertical slip rates along the N-S-oriented Trougout major fault are ~1.6 mm/yr and ~2 mm/yr respectively. In the Southern part, the Rif frontal thrust shows a shortening rate of ~1.8 mm/yr into Fes and Meknes area. In the Eastern part, the deformation is focused on the Nekor left-lateral strike-slip major fault with ~1.5 mm/yr. Incision features and raised marine terraces involve an uplift of the chain about ~0.2 mm/yr. The overall deformation in the Rif seems to be continuous since the Messinian-Pliocene time.These new morphotectonic constraints are consistent with the GPS measurements showing southwestward overall motion of most of the Rif belt with respect to stable Africa, associated to clockwise rotation. Finally, we propose a geodynamic model in which the Rif, the Alboran sea and the Betics belong to a single microplate bounded by the strike-slip faults of the Betics on the North, the Rif frontal thrust on the South, the Nekor and TASZ (Trans Alboran Shear Zone) strike-slip faults on the East and North-East, and the western Rif folded structures on the West.
L'objectif de cette étude est d'identifier et de quantifier les déformations actuelles dans la chaine du Rif (Maroc), notamment celles associées aux failles actives (localisation, géométrie, cinématique). Pour ce faire, nous mettons en œuvre pour la première fois dans cette région, une approche morphotectonique. Les sites et failles sélectionnés et étudiés se situent dans la partie Nord (les failles conjuguées de la baie d'Al-Hoceima: Trougout, Boujibar et Rouadi), l'Est (la faille de Nékor) et le Sud (front chevauchant sud rifain entre Fes et Meknes).A partir des outils de la morphotectonique (MNTs à différentes résolutions, images satellitaires, photographies aériennes), d'analyses de terrain et grâce aux méthodes de datation du Quaternaire (U/Th, OSL, 14C et isotopes cosmogéniques produits in-situ 10Be, 3He, 36Cl), cette étude met en évidence et quantifie une déformation transtensive dans la partie Nord de la chaine. Les vitesses de glissement horizontales et verticales le long de la faille principale d'orientation méridienne de Trougout sont de ~1.6 mm/an et ~2 mm/an, respectivement. Dans la partie Sud, nous montrons que le front rifain entre Fez et Meknes est actif avec une vitesse de raccourcissement de ~1.8 mm/an. La déformation dans la région Est se localise principalement sur la faille du Nékor avec une vitesse décrochante senestre de ~1.5 mm/an. Par ailleurs, la présence de nombreuses figures d'incision et de surfaces marines soulevées au niveau du littoral Nord témoignent d'une surrection généralisée de la chaine de l'ordre de ~0.2 mm/an. L'ensemble de cette déformation semble être constante depuis la période du Messino-Pliocène. Ces résultats sont cohérents avec les données GPS qui montrent un déplacement de ~5mm/an vers le SW de l'ensemble du Rif associé à un mouvement rotatif horaire, dans le référentiel Afrique stable. D'un point de vue géodynamique, nous proposons que le Rif, la mer d'Alboran et les Bétiques appartiennent à une même microplaque limitée au Nord par les failles décrochantes des Bétiques, au Sud par le chevauchement rifain, à l'Est et au Nord-Est par les failles décrochantes de Nékor et de la TASZ (Trans Alboran Shear Zone) et à l'Ouest par les structures plissées bordières du Rif.
https://tel.archives-ouvertes.fr/tel-01170466

NNT : 2014MON20105
tel-01170466
https://tel.archives-ouvertes.fr/tel-01170466
https://tel.archives-ouvertes.fr/tel-01170466v2/document
https://tel.archives-ouvertes.fr/tel-01170466/file/41875_POUJOL_2014_archivage_cor.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have integrated the relatively unknown distal domains of the Lower Congo basin, where the main depocenters of the Congo submarine fan are located, with the better-constrained successions on the shelf and upper slope, through the analysis of thousands of km of 2D seismic reflection profiles off-shore the Congo-Angola passive margin. The basin architecture is depicted by two ca. 800-km-long regional cross sections through the northern (Congo) and southern (Angola) margin. A large unit deposited basinward of the Aptian salt limit is likely to be the abyssal-plain equivalent of the upper-Cretaceous carbonate shelf that characterized the first post-rift deposits in West-equatorial African margins. A latest-Turonian shelf-deepening event is recorded in the abyssal plain as a long period (Coniacian-Eocene) of condensed sedimentation and basin starvation. The onset of the giant Tertiary Congo deep-sea fan in early Oligocene following this event reactivates the abyssal plain as the main depocenter of the basin. The time-space partitioning of sedimentation within the deep-sea fan results from the interplay among increasing sediment supply, margin uplift, rise of the Angola salt ridge, and canyon incision throughout the Neogene. Oligocene-early Miocene turbidite sedimentation occurs mainly in NW-SE grabens and ponded inter-diapir basins on the southern margin (Angola). Seaward tilting of the margin and downslope salt withdrawal activates the up-building of the Angola escarpment, which leads to a northward (Congo) shift of the transfer zones during late Miocene. Around the Miocene-Pliocene boundary, the incision of the Congo submarine canyon confines the turbidite flows and drives a general basinward progradation of the submarine fan into the abyssal plain The slope deposition is dominated by fine-grained hemipelagic deposits ever since. Results from this work contribute to better understand the signature in the ultra-deep deposits of processes acting on the continental margin as well as the basin-wide sediment redistribution in areas of high river input.
ISSN: 0040-1951

hal-00424533
https://hal.archives-ouvertes.fr/hal-00424533
DOI : 10.1016/j.tecto.2008.04.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Parentis and Arzacq-Mauleon basins located in front of the V-shaped oceanic propagator in the Bay of Biscay present evidence for extreme crustal thinning. In this paper we investigate the 3D structure of these rift basins, based on field observations and the interpretation of seismic data. We compare these results with those obtained from two different and independent inversion methods: first a 3D gravity inversion and second the standard Euler deconvolution.;For the Mauleon Basin our results show that the positive gravimetric anomaly identified above its southern margin is the consequence of two shallower high density bodies that are separated by the Pamplona fault and a deeper high density body. The high density bodies can be explained by the presence of mid-crustal and mantle rocks that were exhumed or uplifted at shallower depth during Early Cretaceous rifting before they were reworked and integrated to the Pyrenean chain during compression phase. Also, during this reactivation phase, some slices of the exhumed mid-crustal and mantle rocks were sheared off and were integrated in the present-day thrust belt in the Mauleon basin. For the Parentis Basin we can demonstrate, based on seismic data and gravimetric inversion methods, a decrease in extension from west to east, which is compatible with the V-shape geometry of the overall basin. Along strike, a change in the fault geometry from downward concave top-basement detachment faults to upward concave high-angle faults can be observed eastwards, i.e. towards the termination of the basin. A key structure, controlling the evolution of the Parentis Basin, is the east-west trending Ibis fault. We interpret this fault to have initially formed as a strike slip fault before it was reactivated during later crustal thinning. At present, it forms the limit between an upper plate sag basin to the north and a lower plate sag basin, floored at least locally by a top-basement detachment faults to the south. The strong asymmetry of the basin is supported by the shape of the basin and the results of standard Euler deconvolution.
ISSN: 0040-1951

hal-00523444
https://hal.archives-ouvertes.fr/hal-00523444
DOI : 10.1016/j.tecto.2010.04.023

Éditeur(s) : HAL CCSD
Résumé : Sand intrusions (or injectites) are most often the product of post-depositional remobilization of sand leading to its injection into the surrounding rocks. While injectites were recognized for the first time nearly 200 years ago, their emplacement process has been studied for a couple of decades only, since the concepts of deep sea depositional environments have allowed us to better understand their emplacement processes. However, these processes are still relatively poorly understood. Our approach is based on the study of injectites in the Lower Congo Basin from seismic and well data, which we compare to a fossil system in the SE France basin. We have shown that: (1) In buried turbidite channel systems draping deposits on the channel flanks and terraces of channels have the same geophysical signature as 'wing-like' injectites. Finally, the only criterion for identifying seismic injectites is the presence of bedding-discordant seismic reflections, and in the best case the associated uplift of the overlying seismic reflectors. (2) Seismic-scale conical and saucer-shaped sand injectites have been identified in the Lower Congo Basin. The remobilization is likely due to overpressuring induced by the buoyancy effect of hydrocarbons trapped in the margins of a lobe buried underneath 160 m of sediment, followed by the sudden injection of fluidized sand associated with fault reactivation of faults (with a possible role of nearby salt diapirs). (3) A network of injectites (dykes, sills/wings and laccoliths) was formed in the Vocontian basin during the late Albian and/or early Cenomanian, from a lower-middle Albian turbidite channel. The emplacement is probably due to the early compartmentalization of the channel during its burial and the increase of the sedimentation rate generating overpressure; and the subsequent large influx of deep fluids triggering injection. The injection of sand was polyphased: a first episode formed the sills and another emplaced the dykes. Sills/wings and dykes propagated about 2 km laterally away from the parent sand body and about 200 m up to the surface, revealing a much more extended lateral than vertical reach, contrary to the classically accepted idea from the interpretation of seismic data. (4) The emplacement of this large network of injectites was governed by hydrofracturing. Therefore, its morphology is dependent on the host rock heterogeneity (isotropy, fractures), the paleo-stress orientation (ó3 = NW-SE) and the burial depth of the source (300-600 m) at the time of injection. The study of this fossil network allows us to define the relationship between morphology of the injected network and stress state at the time of injection. This relationship can be extrapolated to constrain the morphology of subsurface networks beyond seismicvisibility. (5) Sands injected into low permeability lithologies bear evidence to a major event of fluid escape in the studied basin, but also channeled fluids long after their formation. In this way, injectites both attest to specific episodes of fluid migration in sedimentary basins and contribute to long-lived re-routing of migrating fluids once emplaced. The injection of sand is associated with the sudden escape of fluids, probably resulting from a significant tectonic and/or sedimentary event; in addition, the architecture of injectite networks is governed by the local paleo-stress and heterogeneity in the host rock. Consequently, characterizing injectite networks is an important step in understanding the plumbing systems of continental margins, i.e. the post-depositional evolution of sedimentary basins.
Les intrusions sableuses (ou injectites) sont le plus souvent le produit de la remobilisation post-dépositionnelle des sédiments et de l'injection du sable dans les roches environnantes. Bien que reconnues pour la première fois il y a près de 200 ans, elles ne sont réellement étudiées que depuis quelques dizaines d'années, depuis que les concepts sur les environnements de dépôt dans les domaines marins profonds nous permettent de mieux comprendre les processus de mise en place. Cependant, ces processus restent encore aujourd'hui relativement mal compris. Notre approche repose sur l'étude d'injectites dans le bassin du Bas-Congo a partir de données de sismique et de puits que nous comparerons a un système fossile dans le bassin du SE de la France. Nous avons montre que : (1) Dans des systèmes de chenaux turbiditiques enfouis, les dépôts de drapage sur les marges et terrasses de chenaux présentent la même signature géophysique que les injectites de type "wing". Finalement, le seul critère sismique d'identification des injectites est la présence de réflexions sismiques sécantes vis-a-vis de la stratigraphie associée dans le meilleur des cas au soulèvement des réflecteurs sismiques sus-jacents. (2) Des injectites d'échelle sismique en forme de cône et d'assiette ont été identifiées dans le bassin du Bas-Congo. La remobilisation résulte probablement des pressions anormales induites par l'effet de flottabilité des hydrocarbures piégés dans les marges d'un lobe enfoui sous 160 m de sédiment, puis de l'injection soudaine du sable fluidise associée a la réactivation de failles (possible rôle des diapirs de sel a proximité). (3) Un réseau d'injectites (dykes, sills/wings et laccolites) s'est formé dans le bassin Vocontien entre la fin de l'Albien supérieur et/ou le début du Cénomanien, depuis un chenal turbiditique de l'Albien inférieur-moyen. La mise en place résulte probablement de la compartimentalisation précoce du chenal au cours de son enfouissement et de l'augmentation du taux de sédimentation générant la surpression et de l'apport ulterieur d'importante quantité de fluides profonds déclenchant l'injection. L'injection du sable a été polyphasée : une première injection a formé des sills et une suivante des dykes. Les sills/wings et les dykes se sont propagés latéralement au chenal source sur environ 2 km et vers la surface sur environ 200 m, mettant en évidence une forte remobilisation latérale plutôt que verticale, contrairement a l'idée classiquement admise a partir de l'interprétation des données sismiques. (4) La formation de ce large réseau d'injectites a été gouvernée par des mécanismes d'hydrofracturation. Par conséquent, sa morphologie a été dépendante des hétérogenéités de la roche hôte (milieu isotrope, fracture), des directions de paléo-contraintes (ƒÐ3 = NWSE) et de la profondeur d'enfouissement de la source (300-600 m) au moment de l'injection. L'étude de ce réseau fossile permet de définir les relations entre morphologie du réseau injecté et état de contraintes au moment de l'injection. Cette relation peut être extrapolée de façon à contraindre la morphologie des réseaux de subsurface au-delà de la visibilité sismique. (5) Les sables injectés dans des lithologies de faible perméabilité témoignent d'un épisode d'échappement de fluide important dans les bassins étudiés mais ont aussi guide les fluides longtemps après leur formation. Les injectites contribuent ainsi a l'initiation épisodique et la pérennisation de migrations de fluides dans les bassins sedimentaires. Le processus d'injection est associé a l'échappement brutal de fluides, résultant vraisemblablement d'un évènement tectonique et/ou sédimentaire important, et l'architecture des réseaux d'injectites est gouverné par les paléo-contraintes locales et les hétérogénéités de la roche hôte. Par conséquent, la caractérisation des réseaux d'injectites est une étape importante dans la compréhension de la plomberie des marges, c'est-a-dire l'évolution post-dépôt des bassins sédimentaires.
https://tel.archives-ouvertes.fr/tel-01011486

tel-01011486
https://tel.archives-ouvertes.fr/tel-01011486
https://tel.archives-ouvertes.fr/tel-01011486/document
https://tel.archives-ouvertes.fr/tel-01011486/file/These_Monnier_2013_banalisee.pdf

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We use digital elevation models and satellite imagery data completed with field observations to develop an integrated morphotectonic analysis of the anomalous topography of the Central Cordillera of Patagonia between 46 degrees S and 48 degrees S, in a region overlying subducted segments of the Chile Spreading Ridge. This region shows a number of peculiar features, not expected in a normal subduction-related belt located away from a buried spreading center. First, it is characterized by overall short-wavelength topography and highly contrasted reliefs, typical of deeply incised young mountain belts, but surprisingly, also by an average very low elevation of similar to 900 m. Second, the Cordillera lacks central high reliefs; instead, there is a central, depressed domain with average low slope gradients including the deepest point of the study area (300 m below sea level in the bottom of Lake General Carrera/Buenos Aires). This depressed area is flanked by western and eastern regions of higher elevation having opposite general slope dips. To the east, the central Patagonian Cordillera is now separated from the flat plains of the Pampean domain (representing its former piedmont) and several elevated basaltic plateaus (mesetas) by 160 degrees N-180 degrees N trending morphotectonic corridors and the western border scarps of the mesetas. These scarps correspond to neotectonic features controlled by recent vertical faults, mostly active after 3 Ma. Remnants of a former peneplain, the Avellanos surface, are widespread within the entire Cordilleran region. From geological evidence, this peneplain formed between 15 and 4 Ma and was connected originally with the mesetas domain and now is dissected by these corridors. It is shown that a negative inversion related to extensional and strike-slip faulting occurred in the frontal region of the Cordillera at 3 Ma synchronously with the emplacement of magmatic products. Timing of the extensional deformation in central Patagonia is concomitant with the migration at depth of different segments of the South Chile Ridge, which entered the trench at 6 and 3 Ma, respectively, and the consequent opening of a slab window allows asthenospheric hot mantle to reach lithospheric regions. Finally, migration of segments of the Chile Spreading Ridge since 6 Ma triggered regional uplift of the Cordillera followed by limited extension in relation with increased thermal weakening of the crust.
ISSN: 0278-7407

hal-00486334
https://hal.archives-ouvertes.fr/hal-00486334
DOI : 10.1029/2009TC002453

Éditeur(s) : HAL CCSD
Résumé : International audience
The history of the peneplain in East Sayan was studied using apatite fission-track analysis (AFTA). This method is suitable for determining the formation time of the erosional surface and estimating its denudation rate. The largest known relic of the peneplanation surface in this area is the Oka Plateau, separated from the Kropotkin Ridge by the Oka-Jombolok fault. The AFTA shows that the peneplain on the Oka Plateau formed in the Late Jurassic-Early Cretaceous. This peneplain is much younger than the erosional surfaces that persist today in the Tien Shan, Gobi Altai, and Mongolian Altai (Early Jurassic). However, it is older than the peneplain on the Chulyshman Plateau, Altai (Late Cretaceous), suggesting asynchronous formation of the ancient peneplain in Central Asia. The similar exhumation histories of samples from the Oka Plateau and Kropotkin Ridge indicate that these morphotectonic structures developed from Jurassic to late Miocene as a single block, which underwent continuous slow denudation at an average rate of 0.0175 mm/yr. Active tectonic processes in the Late Miocene caused the destruction of the peneplanation surface and its partial uplifting to different altitudes. The rate of Pliocene-Quaternary vertical movements along the Oka-Jombolok fault is roughly estimated at 0.046-0.080 mm/yr, which is several times higher than the denudation rate in this area. During the Pliocene-Quaternary, the Oka Plateau has not undergone any significant morphologic changes owing to its intermediate position between the summit plain and datum surface of East Sayan and to its partial shielding by basaltic lavas.
Russian Geology and Geophysics

insu-00839215
https://hal-insu.archives-ouvertes.fr/insu-00839215
DOI : 10.1016/j.rgg.2013.06.004

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
A NE-SW magnetotelluric 110 km-long profile including 18 sites was acquired across the western Rif Cordillera along the Eurasian-African plate boundary, allowing to constrain its poorly known deep structure. It extends from the Internal Zones, close to the Alboran coast, crossing the External Zones and up to the Gharb foreland basin. The periods recorded range from 0.001 s to 1000 s. The combination of magnetotelluric data with available geological data provides new insight regarding the relationship between deep and shallow crustal structures of the Rif Cordillera. Analyses of structural dimensionality suggest a preferential NW-SE direction, and a 2D joint inversion was performed. A 3D inversion extending the 2D model along the strike confirmed the reliability of this approach. The magnetotelluric model shows a heterogeneous upper crust in agreement with the geological structures observed at surface. The Internal Zones correspond to resistive (metamorphic rocks) and conductive (peridotites) bodies, while the External Zones and the foreland basin are characterized by large conductive bodies of variable thickness. A crustal detachment level separating shallow geological units from a probable variscan basement was inferred. At depth, the most relevant feature consists of large resistive bodies with a shallow irregular top, located below the frontal part of the Rif. The outcrops of exotic metapelitic, granitic and gneissic blocks in the frontal part of the Cordillera suggest that these large resistive bodies may correspond to a gneissic or granitic basement surrounded by metapelitic rocks. Late contractive thrust and diapiric processes were responsible for their uplift and shallow emplacement. The Rif constitutes an active southwestward vergent orogenic wedge, oblique to the present-day NW-SE convergent Eurasian-African plate boundary.
ISSN: 1525-2027

hal-00670999
https://hal.archives-ouvertes.fr/hal-00670999
DOI : 10.1029/2011GC003783

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tarim and Junggar basins in central Asia are capped by a thick pile of conglomerates, called the Xiyu Formation, that are commonly linked to a change in climate and/or accelerated uplift near the Plio-Pleistocene boundary. In order to better understand their origin and significance, we carried out a combined structural and magnetostratigraphic study in the Quilitage syncline (southern Tianshan), where the base of the Xiyu conglomerates is observed at both sides of the syncline. A balanced cross-section shows that, even at a local-scale, the base of the Xiyu conglomerates cannot be regarded as a single continuous stratigraphic layer. On the southern flank of the Quilitage syncline, we collected 172 samples collected for magnetostratigraphic dating identify 17 polarity chrons that date the new section from 5.2 to ~ 1.7 Ma and constrain the base of the Xiyu conglomerate here at ~ 1.7 Ma. This is 4.2 Ma younger than the age of the Xiyu previously found on the northern limb of the same syncline. Together with other magnetostratigraphic studies carried out around the Tianshan, our study unambiguously demonstrates that the onset of deposition of the Xiyu conglomerates is diachronous, and that the conglomerates are systematically younger toward the basin. Consequently, the Xiyu Formation should not be considered as a chronostratigraphic marker related to any particular tectonic or climatic event, but is instead a prograding gravel wedge that has prograded over the underthrusting forelands. A synthesis of chronologic and structural results yields progradation rates over the last 10 Ma on the order of ~ 2.0 mm/yr and ~ 3.9 mm/yr south and north of the Tianshan Mountains respectively. These rates are comparable to the shortening rate across the Tianshan range, suggesting that underthrusting is the main factor governing the progradation rate of the Xiyu Formation.
ISSN: 0012-821X

insu-00414151
https://hal-insu.archives-ouvertes.fr/insu-00414151
https://hal-insu.archives-ouvertes.fr/insu-00414151/document
https://hal-insu.archives-ouvertes.fr/insu-00414151/file/Charreau-EPSL-2009.pdf
DOI : 10.1016/j.epsl.2009.07.035

Éditeur(s) : HAL CCSD Springer
Résumé : The analysis of three different regions of the South- Pyrenean fold-and-thrust belt reveals that during the Tertiary compression the hydrological system was compartmentalised in time and space. During the early-middle Eocene, when the thrust front affected marine soft-sediments in the Ainsa basin, the thrust fault zones were dominated by formation fluids derived from Eocene marine waters trapped in the underlying Eocene marls, although influences of meteoric waters were also present. During the middle-late Eocene, when the thrust front emplaced marine rocks over continental redbeds in the eastern Catalan basin (L'Escala thrust), the thrust fault zones were dominated by meteoric fluids. These fluids flowed preferentially along these faults, draining laterally the meteoric fluids and acting as barriers hindering their flowing towards more external parts of the belt. During the Oligocene, the most external part of the fold-and-thrust belt in the eastern Catalan basin developed on top of a salt detachment horizon. The thrust front affected continental materials of late Eocene-Oligocene age. At this moment, the thrusts were conduits for meteoric fluids arriving from the surface and also for evolved meteoric fluids migrating over short distance upwards after being in contact with the underlying evaporitic beds. Most of the fractures show a similar sequence of microfractures. Microfractures of stage 1 formed when the sediment was poorly lithified. Microfractures of stage 2 represent the main episode of vein formation which developed when a progressive induration of the host sediment occurred. During microfracture stage 3, formed in an extensional regime, the host sediment was more indurated. The repetition of this sequence of microfractures in different fracture generations of the same outcrop indicates that the sediment induration was restricted to the vicinity of the vein. Away from the veins, the sediment remained poorly lithified during the entire deformation cycle. Calcite cement within the host rock precipitated later than the syn-compressive veins, when the sediment was more indurated. Elemental geochemistry and stable isotopes of the calcite veins indicates that early generation of microfractures is infilled by local fluids (either marine or meteoric), whereas external fluids (meteoric or evolved meteoric) infilled the main compressive stage of microfractures. The hot temperature of these fluids (157°C to 183°C in the Atiart-Arro example) indicates their circulation through deep parts of the thrust belt. The progressive increase of the 87Sr/86Sr ratio through time is due to the progressive uplift, exposure and erosion of the internal Pyrenean Axial Zone.
Thrust belts and foreland basins, from fold kinematics to hydrocarbon systems

hal-00408001
https://hal.archives-ouvertes.fr/hal-00408001
DOI : 10.1007/978-3-540-69426-7_5

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
Although they are famous among Earth scientists, the Lherz peridotites are exposed within geological formations of the North Pyrenean Zone (NPZ) still lacking detailed investigations. Our study focuses on the metasediments of the Aulus basin hosting the Lherz peridotite body and associated ultramafic fragments of smaller size. The new data set comprises of structural analysis and detailed geological mapping of the massive Mesozoic marbles that form the prerift sequence typical of the NPZ and of the ultramafic-rich clastic breccia formations surrounding the peridotite bodies. The massive marbles display an evolution from hot and ductile to cold and brittle deformation, indicative of an exhumation process ending with the sedimentary reworking of both the deformed Mesozoic metasediments and the exhumed ultramafic rocks. Crystal Preferred Orientations (CPO) measured in the marbles support a deformation mechanism by dislocation creep of calcite, which is dominant between 400 8C and 600 8C; these deformation temperatures are within the range determined earlier by Clerc et al. (2015), using RSCM (Raman Spectroscopy of Carbonaceous Material) geothermometry. As a consequence, we better describe the transition from ductile to brittle deformation in the prerift marbles and clarify the origin of the syn-rift breccias. Due to continuous exhumation along detachments' faults, the brecciated metamorphic carbonates of the prerift NPZ sedimentary cover were passively uplifted towards shallower levels and progressively unroofed, while transported passively on the back of the exhumed ultramafic footwall. These results are consistent with the recent interpretations of the North Pyrenean peridotites as remnants of subcontinental mantle rocks exhumed within the pre-Pyrenean rift system. We emphasize the importance of tectonic decoupling between the Mesozoic sedimentary cover and the Palaeozoic basement, which leads to the juxtaposition of metamorphosed and deformed Mesozoic Please cite this article in press as: Lagabrielle Y, et al. Very high geothermal gradient during mantle exhumation recorded in mylonitic marbles and carbonate breccias from a Mesozoic Pyrenean palaeomargin (Lherz area, North Pyrenean Zone, France). C. R. Geoscience (2016), http://dx.
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079/document
https://hal-insu.archives-ouvertes.fr/insu-01285079/file/1-s2.0-S1631071315002060-main.pdf
DOI : 10.1016/j.crte.2015.11.004

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Continuous Global Positioning System (CGPS) position time series from eastern North America constrain the pattern and magnitude of regional crustal deformation. Initial analysis delineates consistent uplift patterns, as expected from glacial isostatic adjustment (GIA) predictions, but the associated horizontal deformation is not definitive, in part due to the short time periods for a significant number of the available stations. We employ an eigenpattern decomposition in order to define a unique, finite set of deformation patterns for this continuous GPS data. Similar in nature to the empirical orthogonal functions historically employed in the analysis of atmospheric and oceanographic phenomena, the method derives the eigenvalues and eigenstates from the diagonalization of the correlation matrix using a Karhunen-Loeve expansion (KLE). The KLE technique is used to identify the important modes in both time and space for the CGPS data, modes that potentially include signals such as horizontal and vertical GIA, tectonic strain, and seasonal effects. Here we filter both the vertical and horizontal velocity patterns on different spatiotemporal scales in order to study the potential geophysical sources, after the removal of correlated and random noise. The method is successful in disaggregating the linear vertical signal from more variable and less spatially correlated signals. The vertical and horizontal results are compared to the predictions of the ICE-3G GIA loading model with a number of plausible mantle viscosity profiles. The horizontal velocity analysis allows for qualitative differentiation between several potential GIA models and suggests that, with longer time series, this technique can be employed to remove correlated noise and improve estimates of crustal strain patterns and their sources.
ISSN: 0033-4553

hal-00795454
https://hal.archives-ouvertes.fr/hal-00795454
DOI : 10.1007/s00024-011-0420-1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Main Himalayan Thrust (MHT) is the source of great earthquakes that have been documented along the range. Its geometry is a key parameter that influences accommodation of tectonic loading and earthquake magnitudes along the Himalayan Arc. Although seismic images are available for both the western and the central part of the range, this geometry remains poorly constrained for the Bhutanese Himalayas. Here we address this issue using a 10Be cosmogenic nuclides denudation transect across western Bhutan. We observe a wide low denudation rate domain between 50 km and 110 km from the front followed by a strong northward increase. Using a joint inversion of denudation rates, GPS data, and Holocene uplift rates, we interpret this pattern as a consequence of a flat-ramp transition along the MHT. Compared to central Nepal and Sikkim, this location of the ramp suggests a wider décollement, with implications for greater seismogenic potential of the MHT in western Bhutan.
ISSN: 0094-8276

Droits : info:eu-repo/semantics/OpenAccess
hal-01174088
https://hal.archives-ouvertes.fr/hal-01174088
https://hal.archives-ouvertes.fr/hal-01174088v2/document
https://hal.archives-ouvertes.fr/hal-01174088/file/lerouxmalloufGRL2015.pdf
DOI : 10.1002/2015GL063767