Éditeur(s) : HAL CCSD
Résumé : This paper presents a collection of wood species with important uses in musical instruments, in reference to historical and geographical cultural specificities, with ranges of viscoelastic vibrational properties by species. Data combine our experimental characterizations and extensive literature review, gathered in a specific relational database. An overview of vibrational properties' distribution on c.400 species is introduced. Two case studies of wood choices for a given function in different epochs or regions are presented: woods for European historical bows, and woods for idiophone bodies in different continents. Trends are contrasted: very different properties associated to historical changes in the first case; some common features over different regions in the second one.
Proceedings of the International Conference of COST Action IE0601 Wood Science for the Preservation of Cultural Heritage
Braga, Portugal

hal-00808403
https://hal.archives-ouvertes.fr/hal-00808403
https://hal.archives-ouvertes.fr/hal-00808403/document
https://hal.archives-ouvertes.fr/hal-00808403/file/Vibrational_properties_tropical_wood_Bremaud_al.pdf

Éditeur(s) : New York : C. T. Dillingham Boston : Lee and Shepard
Description : Immersion in the history, culture and way of life of the Caribs of the amazing Lesser Antilles.
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Ville de Pointe-à-Pitre. Réseau des bibliothèques
Permalien : http://www.manioc.org/patrimon/PAP11013
PAP11013

Éditeur(s) : HAL CCSD
Résumé : International audience
The anatomy of tension wood and opposite wood was compared in 21 tropical rain forest trees from 21 species belonging to 18 families from French Guyana. Wood specimens were taken from the upper and lower sides of naturally tilted trees. Measurement of the growth stress level ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile-stressed wood on the upper side, called tension wood and normally tensile-stressed wood on the lower side, called opposite wood. Quantitative parameters relating to fibres and vessels were measured on transverse sections of both tension and opposite wood to check if certain criteria can easily discriminate the two kinds of wood. We observed a decrease in the frequency of vessels in the tension wood in all the trees studied. Other criteria concerning shape and surface area of the vessels, fibre diameter or cell wall thickness did not reveal any general trend. At the ultrastructural level, we observed that the microfibril angle in the tension wood sample was lower than in opposite wood in all the trees except one (Licania membranacea).
IAWA Journal

hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915/document
https://hal.archives-ouvertes.fr/hal-00194915/file/IAWA2006_RuelleClairBeauchenePrevostFournier_ccsd.pdf
IRD : PAR00001321

Éditeur(s) : London : Richard Phillips
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Archives territoriales de Guyane
Permalien : http://www.manioc.org/patrimon/GAD12003
GAD12003

Éditeur(s) : London : Saunders and Otley
Description : History of the Caribs. Culture and way of life of Antiguans in the 18th and 19th Centuries.
Siècle(s) traité(s) : 18
Droits : Domaine public
Provenance : Ville de Pointe-à-Pitre. Réseau des bibliothèques
Permalien : http://www.manioc.org/patrimon/PAP11081
PAP11081

Résumé : Arbusto o árbol de hasta 20 m. Hojas oblongas a anchamente aovadas, de 3 a 15 cm, agudas a acuminadas, aserradas, estrellado-tomentosas, marcadamente asimétricas. Flores amarillentas, fragantes, en cimas axilares pequeñas, con 5 pétalos de 3 mm. Fruto leñoso, globoso u oval, de 2 a 4 cm, con tubérculos duros.
Arbuste ou arbre pouvant atteindre 20 m. Feuilles oblongues à largement ovées, de 3 à 15 cm, aiguës à acuminées, dentées, en forme d’étoile, tomenteuses, très asymétriques. Fleurs jaunâtres, odorantes, sur de petites tiges axillaires, avec 5 pétales de 3 mm. Fruit ligneux, arrondi ou ovale, de 2 à 4 cm, avec tubercules fermes.
Tree deciduous up to 16 m tall with spreading branches. Leaves alternate 20 cm x 7 cm, lanceolate to ovate, unequal at the base, margins crenate-dentate, hairy from sub-glabrous to tomentose; inflorescence axillary in panicles, flowers 3 mm with five yellow-green petals, fragrant; fruit black, woody, warty, sub-globose 1-2 cm in diameter with the faint smell of molasses, seeds numerous.
Regiones tropicales del continente americano.
Régions tropicales du continent américain.
Tropical and sub-tropicalregions of the American continent.

http://www.tramil.net/fototeca/plant179

Éditeur(s) : London : William Kidd
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Archives départementales de Guadeloupe
Permalien : http://www.manioc.org/patrimon/ADG17046
ADG17046

Éditeur(s) : London : Thomas Tegg
Résumé : Ex-Libris : [G. Y Warner]
4° édition
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Fondation Clément
Permalien : http://www.manioc.org/patrimon/FCL18002
FCL18002

Éditeur(s) : London : J. Johnson, St. Paul's Church Yard & J. Edwards
Siècle(s) traité(s) : 18
Droits : Domaine public
Provenance : Collectivité territoriale de Martinique. Bibliothèque Schoelcher
Permalien : http://www.manioc.org/patrimon/SCH13242
SCH13242

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
A feasibility study of glulam was carried out in French Guiana using local wood species. The aim was to determine gluing parameters affording satisfactory behaviour to manufactured glulam in a tropical climate. Three abundant wood species, with special properties, were selected for the study and Resorcinol-Phenol-Formaldehyde resin was used for bonding. Three industrial parameters were considered: adhesive spread rate, closed assembly time and gluing pressure. Delamination and shearing tests were carried outin accordance with European Standards. The tests revealed the influence of wood properties and manufacturing parameters on joint resistance. In fact, the results showed that specific gravity and the shrinkage coefficientgreatly influenced the gluing step. Indeed, wood with a medium specific gravity needed more adhesive and more pressure than wood with a high specific gravity. In addition, planning and lamella thicknesswere found to affect glue joint resistance.
ISSN: 0018-3768

hal-00856933
https://hal.archives-ouvertes.fr/hal-00856933
https://hal.archives-ouvertes.fr/hal-00856933/document
https://hal.archives-ouvertes.fr/hal-00856933/file/Feasibility_glued_laminated_timber_Bourreau_al.pdf

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : The fixation of carbon in tropical forests mainly occurs through the production of wood and leaves, both being the principal components of net primary production. Currently field and satellite observations are independently used to describe the forest carbon cycle, but the link between satellite-derived forest phenology and field-derived forest productivity remains opaque. We used a unique combination of a MODIS enhanced vegetation index (EVI) dataset, a wood production model based on climate data and direct litterfall observations at an intra-annual timescale in order to question the synchronism of leaf and wood production in tropical forests. Even though leaf and wood biomass fluxes had the same range (respectively 2.4 +/- 1.4 and 2.2 +/- 0.4 Mg C ha(-1) yr(-1)), they occurred separately in time. EVI increased with leaf renewal at the beginning of the dry season, when solar irradiance was at its maximum. At this time, wood production stopped. At the onset of the rainy season, when new leaves were fully mature and water available again, wood production quickly increased to reach its maximum in less than a month, reflecting a change in carbon allocation from short-lived pools (leaves) to long-lived pools (wood). The time lag between peaks of EVI and wood production (109 days) revealed a substantial decoupling between the leaf renewal assumed to be driven by irradiance and the water-driven wood production. Our work is a first attempt to link EVI data, wood production and leaf phenology at a seasonal timescale in a tropical evergreen rainforest and pave the way to develop more sophisticated global carbon cycle models in tropical forests.
ISSN: 1726-4170

hal-01268497
https://hal.archives-ouvertes.fr/hal-01268497
DOI : 10.5194/bg-10-7307-2013
PRODINRA : 256018

Éditeur(s) : London : T. Fisher Unwin
Extrait de : The south American series
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Archives territoriales de Guyane
Permalien : http://www.manioc.org/patrimon/GAD12011
GAD12011

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Coarse woody debris (CWD, dead wood sections a parts per thousand yen10 cm diameter) represents a large store of carbon in tropical forests; however, estimates of the flux of carbon from CWD in these forests remain poorly constrained. The objective of this study was to resolve the dry/wet season response of respiration in CWD (R (cwd)), and investigate the importance of biotic and abiotic factors for predicting the seasonal change of R (cwd) at the ecosystem level. This study presents a 4-month time series of R (cwd) measurements conducted on 42 dead trees (26 species) at the Paracou Research Station in French Guiana. R (cwd) measurements were repeated 13 times on each CWD sample from July to November 2011, spanning the transition from wet to dry season, and then from dry season to the following wet season. Seasonal drought caused monthly R (cwd) to drop by 20.5 +/- A 5.1% over the wet-dry transition. Changes in woody tissue moisture content explained 41.9% of the measured seasonal variability in R (cwd), but 60% of the seasonal variability in mean forest R (cwd) rates could be modelled using surface soil water content. We estimate that R (cwd) is approximately 5% of annual ecosystem respiration (R (eco)) and that seasonal variations in R (cwd) contribute appreciably to seasonal variations of R (eco), and should be included in functional models simulating the response of tropical rainforest ecosystems to current and future climate.
ISSN: 1432-9840

hal-01032431
https://hal.archives-ouvertes.fr/hal-01032431
DOI : 10.1007/s10021-013-9684-x

Éditeur(s) : Paris : Vincent
Siècle(s) traité(s) : 18
Droits : Domaine public
Provenance : Collectivité territoriale de Martinique. Bibliothèque Schoelcher
Permalien : http://www.manioc.org/patrimon/SCH13240
SCH13240

Éditeur(s) : HAL CCSD Wiley
Résumé : 1. Trade-offs among functional traits reveal major plant strategies that can give insight into species distributions and ecosystem processes. However, current identification of plant strategies lacks the integration of root structural traits together with leaf and stem traits. 2. We examined correlations among 14 traits representing leaf, stem and woody root tissues. Traits were measured on 1084 individuals representing 758 Neotropical tree species, across 13 sites representative of the environmental variation encompassed by three widespread habitats (seasonally flooded, clay terra firme and white-sand forests) at opposite ends of Amazonia (French Guiana and Peru). 3. Woody root traits were closely aligned with stem traits, but not with leaf traits. Altogether leaf, stem and woody root traits delineated two orthogonal axes of functional trade-offs: a first axis defined by leaf traits, corresponding to a leaf economics spectrum, and a second axis defined by covarying stem and woody root traits, corresponding to a wood economics spectrum. These axes remained consistent when accounting for species evolutionary history with phylogenetically independent contrasts. 4. Despite the strong species turnover across sites, the covariation among root and stem structural traits as well as their orthogonality to leaf traits were strongly consistent across habitats and regions. 5. We conclude that root structural traits mirrored stem traits rather than leaf traits in Neotropical trees. Leaf and wood traits define an integrated whole-plant strategy in lowland South American forests that may contribute to a more complete understanding of plant responses to global changes in both correlative and modelling approaches. We suggest further meta-analyses in expanded environmental and geographic zones to determine the generality of this pattern.
ISSN: 0269-8463

hal-01032415
https://hal.archives-ouvertes.fr/hal-01032415
DOI : 10.1111/j.1365-2435.2012.02020.x

Éditeur(s) : HAL CCSD
Résumé :  
The anatomy of tension wood and opposite wood was compared in 21 tropical rain forest trees from 21 species belonging to 18 families from French Guyana. Wood secimens were taken from the upper and lower sides of naturally titled trees. Measurement of the growth stress level ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile-stressed wood on the upper side, called tension wood and normally tensile-stressed wood on the lower side, called opposite wood. Quantitative parameters relating to fibres and vessels were measured on transverse sections of both tension and opposite wood to check if certain criteria can easily discriminate the two kinds of wood. We observed a decrease in the frequency of vessels in the tension wood in all the trees studied. Other criteria concerning shape and surface area of the vessels, fibre diameter or cell wall thickness did not reveal any general trend.At the ultrastructural level, we observed that the microfibril angle in the tension wood sample was lower than in opposite wood in all the trees except one (Licania membranacea).
IAWA Journal

hal-01032149
https://hal.archives-ouvertes.fr/hal-01032149

Éditeur(s) : HAL CCSD Walter de Gruyter
Résumé :  
A method for measuring shrinkage resulting from drying in the three anisotropic directions is developed and tested. Measurements are performed on sawn discs, a technique which simplifies preparation and enables large numbers of measurements. Shrinkage values can be represented as a map of the disc surface. The results indicate that comparisons between shrinkage distribution and tension wood distribution on the discs show a clear relationship and can be measured with relatively high accuracy in reference to the "shrinkage map". In the long term, this method could be useful in the timber industry as a means for choosing the direction in which logs are cut depending on their type of wood composition.
Holzforschung

hal-01032055
https://hal.archives-ouvertes.fr/hal-01032055
DOI : 10.1515/HF.2003.100

Éditeur(s) : HAL CCSD
Résumé : Wood samples were taken from the upper and lower sides of 21 naturally tilted trees from 18 families of angiosperms in the tropical rainforest in French Guyana. The measurement of growth stresses ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile stressed wood on the upper side, called tension wood and lower tensile stressed wood on the lower side, called opposite wood. Eight species had tension wood fibres with a distinct gelatinous layer (G-layer). The distribution of gelatinous fibres varied from species to species. One of the species, Casearia javitensis (Flacourtiaceae), showed a peculiar multilayered secondary wall in its reaction wood. Comparison between the stress level and the occurrence of the G-layer indicates that the G-layer is not a key factor in the production of high tensile stressed wood.
IAWA Journal

hal-00112579
https://hal.archives-ouvertes.fr/hal-00112579
https://hal.archives-ouvertes.fr/hal-00112579/document
https://hal.archives-ouvertes.fr/hal-00112579/file/IAWA2006_ClairRuelleBeauchenePrevostFournier_ccsd.pdf
IRD : PAR00001136

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Functional ecology has long considered the support function as important, but its biomechanical complexity is only just being elucidated. We show here that it can be described on the basis of four biomechanical traits, two safety traits against winds (SW) and self-buckling (SB), and two motricity traits involved in sustaining an upright position, tropic motion velocity (MV) and posture control (PC). All these traits are integrated at the tree scale, combining tree size and shape together with wood properties. The assumption of trait constancy has been used to derive allometric scaling laws, but it was more recently found that observing their variations among environments and functional groups, or during ontogeny, provides more insights into adaptive syndromes of tree shape and wood properties. However, over-simplified expressions have often been used, possibly concealing key adaptive drivers. An extreme case of over-simplification is the use of wood basic density as a proxy for safety. Actually, since wood density is involved in stiffness, loads and construction costs, the impact of its variations on safety is non-trivial. Moreover, other wood features, especially the microfibril angle (MFA), are also involved. Furthermore, wood is not only stiff and strong, but it also acts as a motor for MV and PC. The relevant wood trait for that is maturation strain asymmetry. Maturation strains vary with cell wall characteristics such as MFA, rather than with wood density. Finally, the need for further studies about the ecological relevance of branching patterns, motricity traits and growth responses to mechanical loads is discussed.
ISSN: 0022-0957

hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904/document
https://hal.archives-ouvertes.fr/hal-00909904/file/Integrative_biomechanics_for_tree_Fournier_al.pdf
DOI : 10.1093/jxb/ert279

Résumé : Arbol de hasta 15 m de alto con corteza blanquecina, suave y madera dura y pesada. Hojas obovadas o elípticas, obtusas, con venación finamente reticulada, corto pecioladas. Panículas con flores blancas, glandulosas; cáliz con 5 lóbulos. Fruto ovoide, negro al madurar.
Arbre pouvant atteindre 15 m de haut, écorce blanchâtre et douce, bois dur et lourd. Feuilles obovées ou elliptiques, obtuses, à nervation finement réticulée, avec un court pétiole. Panicules avec fleurs blanches glanduleuses; calice à 5 lobes. Fruit ovoïde, noir une fois parvenu à maturité.
Evergreen tree up to 15 m high with smooth, whitish, variegated and flaking bark, hard and heavy wood.  Leaves simple, entire, opposite in pairs, dark green, leathery, oblong to elliptic, obtuse at the tip, rounded at the base, 15-20 x 5-7 cm, prominent  venation, highly aromatic when crushed; inflorescence a compound panicle 5-10 cm long, flowers numerous 3-4 mm long, white; fruit a subglobose to ellipsoid berry, 8-10 mm long, thickly covered with small convex glands, black when ripe.
Nativa del norte de Sudamérica y las Antillas, cultivada en los trópicos.
Originaire du nord de l’;Amérique du Sud et des Antilles, cultivée sous les tropiques.
Native to northern South America and the Antilles, cultivated in the tropics.

http://www.tramil.net/fototeca/plant280