Éditeur(s) : HAL CCSD
Résumé :  
Wood samples were taken from the upper and lower sides of 21 naturally tilted trees from 18 families of angiosperms in the tropical rain forest in French Guyana. The measurement of growth stresses ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile stressed wood on the upper side, called tension wood, and lower tensile stressed wood on the lower side, called opposite wood. Eight species had tension wood fibres with a distinct gelatinous layer (G-layer). The distribution of gelatinous fibres varied from species to species. One of the species, Casearia javitensis (Flacourtiaceae), showed a peculiar multilayered secondary wall in its reaction wood. Comparison between the stress level and the occurrence of G-layer indicates that the G-layer is not a key factor in the production of high tensile stressed wood.
IAWA Journal

hal-01032051
https://hal.archives-ouvertes.fr/hal-01032051

Éditeur(s) : HAL CCSD
Résumé : International audience
Radiocarbon dating and "old wood problem" in the Antilles : the state of the artAmong the many effects that may distort the interpretation of radiocarbon dates are those for which the age of the archaeological event is different from the radiocarbon age of the sample or "14C event" age. This type of problem arises in many cases, notably in the "old wood effect”, and occurs in various regions of the world where very long-lived trees species are common. In the Caribbean anthracological studies indicate a very high frequency of some indigenous centuries-old species such as Guaiacum, Guaiacum officinale L. However the absence of tree-ring data in humid tropical zones deprives us of an accurate inventory of long-lived species and especially the assessment of their longevity. Here we present measurements which enable us to estimate the longevity of archaeological Guaiacum wood posts. They highlight a gap of several centuries between wood from the outer edge and the heart of the tree. This example illustrates the additional uncertainty that can result from dating archeological events when dates are realized on unidentified botanical species from which the area that was sampled is unknown. Another source of error could arise from the use of rot-proof dead wood as fuel if we take into consideration that major hurricanes can produce large amounts of dead wood that may be collected for decades, even centuries. To improve chronometric data used in archaeological interpretations, it is necessary to ensure the quality of the dating process by following a protocol similar to those used in other regions of the world based on a better understanding of the material to be dated by preliminary identifications of wood samples: species, anatomical part, wood moisture content (unseasoned or seasoned).
Radiocarbono y "problema madera vieja", que data de las Antillas: estado del arteEntre los muchos efectos que pueden distorsionar la interpretación de fechas de radiocarbono, destacan aquellos para los que la edad de la prueba arqueológica es diferente de la edad de radiocarbono de la muestra, o la edad del "evento de radiocarbono." Este tipo de problema se presenta en muchos casos, especialmente uno llamado "efecto madera vieja." Esto se refleja en diversas regiones del mundo donde las especies de plantas de mucha longevidad son comunes. En el Caribe, los estudios antracológicos disponibles indican una muy alta frecuencia de algunas especies autóctonas como el guayaco, Guaiacum officinale L. Sin embargo, la casi ausencia de datos de anillos de árboles en los trópicos húmedos, nos impide realizar un inventario exacto de especies de mucha longevidad y sobre todo la evaluación de la longevidad. Algunas de las pruebas presentadas aquí permitieron una estimación de la longevidad de de unos postes de guayaco de origen arqueológico. Ponen de manifiesto una brecha de varios siglos entre las partes externas y el corazón del tronco. Este ejemplo ilustra la aparición de una incertidumbre adicional en la datación de los eventos arqueológicos cuando no conocemos la especie botánica y tampoco la zona de la muestra en el árbol. Otra fuente de error puede surgir de la utilización de la madera muerta de calidad duradera como combustible ya que los grandes huracanes pueden producir grandes cantidades de madera muerta, que puede ser requerida durante décadas, incluso siglos. Para mejorar los datos cronométricos utilizados en interpretaciones arqueológicas, es necesario asegurarse de la calidad de las fechas, y por lo tanto seguir un protocolo similar a los utilizados en otras regiones fundado en una mejor comprensión de los elementos: especie, parte anatómica, humedad de la madera usada (verde o seco).
Parmi les nombreux effets susceptibles de fausser l’interprétation des datations par le radiocarbone, figurent ceux pour lesquels l’âge de l’événement archéologique est différent de l’âge radiocarbone de l’échantillon, ou âge de l’« événement radiocarbone ». Ce type de problème se pose dans de nombreux cas, en particulier celui dénommé « effet vieux bois ». Cette question est prise en compte dans diverses régions du monde où des espèces végétales très longévives sont fréquentes. Dans les Antilles les études anthracologiques disponibles indiquent une fréquence très importante de certaines espèces autochtones multiséculaires dont le gaïac, Guaiacum officinale L.. Cependant, la quasi absence de données dendrochronologiques dans la zone tropicale humide, nous privent d’un inventaire précis des espèces longévives et surtout de l’évaluation de leur longévité. Quelques tests présentés ici ont permis une estimation de la longévité de poteaux d’origine archéologique en bois de gaïac. Ils mettent en évidence un décalage de plusieurs siècles entre les parties externes et le cœur du tronc. Cet exemple illustre l’apparition d’une incertitude supplémentaire dans la datation de l’événement archéologique lorsque que l’on ne connaît ni l’espèce botanique ni la zone de prélèvement dans l’arbre. Une autre source d’erreur pourrait provenir de l’utilisation de bois mort de qualité très durable comme combustible, sachant que les grands cyclones peuvent produire d’importantes quantités de bois mort susceptible d’être récolté pendant des décennies, voire des siècles. Afin d’améliorer les données chronologiques utilisées dans les interprétations archéologiques, il apparaît nécessaire de s’assurer de la qualité des datations, et donc de suivre un protocole similaire à ceux utilisés dans d’autres régions basé sur une meilleure connaissance des éléments datés : espèce, partie anatomique, humidité du bois utilisé (vert ou sec).
Puerto Rico 2013 : Actas del 25to Congreso Internacional de Arqueología del Caribe - Proceeding of the 25th International Congress for Caribbean Archeology - Comptes rendus des communications du 25e Congrés International de l'Archéologie de la Caraïbe
San-Juan, Puerto Rico

hal-01198567
https://hal.archives-ouvertes.fr/hal-01198567
https://hal.archives-ouvertes.fr/hal-01198567/document
https://hal.archives-ouvertes.fr/hal-01198567/file/Stouvenot%20et%20al.%202015.%20Effet%20vieux%20bois%20radiocarbone%20Antilles%20HD.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The study of decay resistance in wood is of interest for wood end-users but also for the global carbon balance since wood biodegradation is a key driver of forest ecosystem functioning through its impacts on carbon and nutrient cycling. We studied the density and wood extractive contents in order to understand decay resistance against soil microflora after 90 days exposure of sapwood and heartwood from three Neotropical wood species known for their decay resistance: Bocoa prouacensis, Vouacapoua americana, Inga alba. Decay resistance was correlated with density more than wood extractive content. The results highlighted different decay resistance strategies. In B. prouacensis, both sapwood and heartwood were highly resistant due to the high density and high content of antifungal wood extractives. In V. americana heartwood, decay resistance was due to the high synergistic-acting wood extractive content. Conversely, with the least dense wood species I. alba, we found that decay resistance was due to the antifungal wood extractives synthesized early in the sapwood. In conclusion, we showed that the three wood species with the same level of heartwood decay resistance performance had different decay resistance strategies according to the anatomic and defensive wood traits.
ISSN: 0964-8305

hal-01321162
https://hal.archives-ouvertes.fr/hal-01321162
https://hal.archives-ouvertes.fr/hal-01321162/document
https://hal.archives-ouvertes.fr/hal-01321162/file/Art_Amusant_al_Diversity_decay_resistance_strategies_Int.Biodet.Biodegr._2014.pdf
DOI : 10.1016/j.ibiod.2014.06.012

Éditeur(s) : HAL CCSD
Résumé : International audience
The anatomy of tension wood and opposite wood was compared in 21 tropical rain forest trees from 21 species belonging to 18 families from French Guyana. Wood specimens were taken from the upper and lower sides of naturally tilted trees. Measurement of the growth stress level ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile-stressed wood on the upper side, called tension wood and normally tensile-stressed wood on the lower side, called opposite wood. Quantitative parameters relating to fibres and vessels were measured on transverse sections of both tension and opposite wood to check if certain criteria can easily discriminate the two kinds of wood. We observed a decrease in the frequency of vessels in the tension wood in all the trees studied. Other criteria concerning shape and surface area of the vessels, fibre diameter or cell wall thickness did not reveal any general trend. At the ultrastructural level, we observed that the microfibril angle in the tension wood sample was lower than in opposite wood in all the trees except one (Licania membranacea).
IAWA Journal

hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915/document
https://hal.archives-ouvertes.fr/hal-00194915/file/IAWA2006_RuelleClairBeauchenePrevostFournier_ccsd.pdf
IRD : PAR00001321

Éditeur(s) : HAL CCSD
Résumé :  
The anatomy of tension wood and opposite wood was compared in 21 tropical rain forest trees from 21 species belonging to 18 families from French Guyana. Wood secimens were taken from the upper and lower sides of naturally titled trees. Measurement of the growth stress level ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile-stressed wood on the upper side, called tension wood and normally tensile-stressed wood on the lower side, called opposite wood. Quantitative parameters relating to fibres and vessels were measured on transverse sections of both tension and opposite wood to check if certain criteria can easily discriminate the two kinds of wood. We observed a decrease in the frequency of vessels in the tension wood in all the trees studied. Other criteria concerning shape and surface area of the vessels, fibre diameter or cell wall thickness did not reveal any general trend.At the ultrastructural level, we observed that the microfibril angle in the tension wood sample was lower than in opposite wood in all the trees except one (Licania membranacea).
IAWA Journal

hal-01032149
https://hal.archives-ouvertes.fr/hal-01032149

Éditeur(s) : HAL CCSD Wiley
Résumé : Wood specific gravity (WSG) is a strong predictor of tree performance across environmental gradients. Yet it remains unclear how anatomical elements linked to different wood functions contribute to variation in WSG in branches and roots across tropical forests. [br/][br/]We examined WSG and wood anatomy in white sand, clay terra firme and seasonally flooded forests in French Guiana, spanning broad environmental gradients found throughout Amazonia. We measured 15 traits relating to branches and small woody roots in 113 species representing the 15 most abundant species in each habitat and representative species from seven monophyletic lineages occurring in all habitats. [br/][br/]Fiber traits appear to be major determinants of WSG, independent of vessel traits, in branches and roots. Fiber traits and branch and root WSG increased from seasonally flooded species to clay terra firme species and lastly to white sand species. Branch and root wood traits were strongly phylogenetically constrained. Lineages differed in wood design, but exhibited similar variation in wood structure across habitats. [br/][br/]We conclude that tropical trees can invest differently in support and transport to respond to environmental conditions. Wind disturbance and drought stress represent significant filters driving tree distribution of Amazonian forests; hence we suggest that biophysical explanations should receive more attention.
ISSN: 0028-646X

hal-01195075
https://hal.archives-ouvertes.fr/hal-01195075
PRODINRA : 269680
PUBMED : 24329812

Éditeur(s) : HAL CCSD Linnean Society of London
Résumé : International audience
The circumscription of Salicaceae has recently been enlarged to include a majority of the species formerly placed in the polyphyletic tropical family Flacourtiaceae. Several studies have reported a peculiar and infrequently formed multilayered structure of tension wood in four of the tropical genera. Tension wood is a tissue produced by trees to restore their vertical orientation, and most studies have focused on trees developing tension wood by means of cellulose-rich, gelatinous fibres, as is known in Populus L. and Salix L. (Salicaceae s.s.). This study aims to determine if the multilayered structure of tension wood is an anatomical characteristic common in other Salicaceae, and if so, how its distribution correlates to phylogenetic relationships. Therefore, we studied the tension wood of 14 genera of Salicaceae as well as two genera of Achariaceae, one genus of Goupiaceae, and one genus of Lacistemataceae, families closely related to Salicaceae or formerly placed in Flacourtiaceae. Opposite wood and tension wood were compared with light microscopy and 3D Laser Scanning Confocal Microscopy. The results indicate that a multilayered structure of tension wood is common in the family except in Salix, Populus, and one of their closest relatives, Idesia polycarpa Maxim. We suggest that tension wood may be a useful anatomical character in understanding phylogenetic relationships in Salicaceae. Further investigation is still needed on the tension wood of several other putatively close relatives of Salix and Populus, in particular Bennettiodendron Merr., Macrohasseltia L.O.Williams and Itoa Hemsl.
ISSN: 0024-4074

hal-01392845
https://hal.archives-ouvertes.fr/hal-01392845
https://hal.archives-ouvertes.fr/hal-01392845/document
https://hal.archives-ouvertes.fr/hal-01392845/file/GhislainEtAl2016_MultylayerTWSalicaceae_Bot_Jsur the_Lin_Soc_HALssfig.pdf
DOI : 10.1111/boj.12471

Éditeur(s) : HAL CCSD
Résumé : Wood samples were taken from the upper and lower sides of 21 naturally tilted trees from 18 families of angiosperms in the tropical rainforest in French Guyana. The measurement of growth stresses ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile stressed wood on the upper side, called tension wood and lower tensile stressed wood on the lower side, called opposite wood. Eight species had tension wood fibres with a distinct gelatinous layer (G-layer). The distribution of gelatinous fibres varied from species to species. One of the species, Casearia javitensis (Flacourtiaceae), showed a peculiar multilayered secondary wall in its reaction wood. Comparison between the stress level and the occurrence of the G-layer indicates that the G-layer is not a key factor in the production of high tensile stressed wood.
IAWA Journal

hal-00112579
https://hal.archives-ouvertes.fr/hal-00112579
https://hal.archives-ouvertes.fr/hal-00112579/document
https://hal.archives-ouvertes.fr/hal-00112579/file/IAWA2006_ClairRuelleBeauchenePrevostFournier_ccsd.pdf
IRD : PAR00001136

Éditeur(s) : HAL CCSD CRC Press
Résumé : Among the ecosystem services provided by forests, wood provisioning takes a central position. Wood and derived products have played a critical role in the evolution of human kind and demand for raw material is increasing in a foreseeable future. Wood is used for energy production, construction and a wide variety of products for which different properties are required. Anatomical, chemical and physical properties of wood are determined through a complex process called xylogenesis controlled by internal and external signals and occurring during the life of the tree. In this chapter we describe i/how wood is formed and ii/the different factors controlling this developmental process with emphasis on the molecular machinery involved, iii/the functions of wood and iv/the biotechnology approaches developed to improve wood biomass production and properties genetically.
Tree Biotechnology

ISBN : 978-1466597143
hal-01032436
https://hal.archives-ouvertes.fr/hal-01032436

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called G-layer, in the fibre wall. The structure of G-layer has been recently described as a hydrogel thanks to N2 adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2 to 50 nm). This led us to revisit the concept of G-layer that was until now only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with typical thick G-layer while it is much less with thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without G-layer is as low as in normal wood. Not depending on the amount of pores, the pore sizes distribution are always centred around 6-12 nm. These results suggest that, among species producing fibres with G-layer, large structural differences of G-layer exist between species
ISSN: 0022-0957

hal-00387861
https://hal.archives-ouvertes.fr/hal-00387861
DOI : 10.1093/jxp/erp133

Éditeur(s) : HAL CCSD
Résumé : The relation between primary and secondary growth has been traditionally studied in terms of growth units and has always being assumed as closely correlated. Pluviometric variation directly affects growth patterns in the neotropical pioneer species Jacaranda copaia. In French Guiana this species produces annual growth rings in the dry season that can be seen with the naked eye.The morphological and anatomical description of three monocaulous individuals was made node by node. The trees where felled at a roadside locality close to the city of Kourou, French Guiana. The comparison of intermodal distance, pith transversal area and wood ring area variation within an individual elucidates the origin of well-known problems in dendrochronological analysis of tropical trees.The wood found close to the pith, known as young wood, always has false wood rings; the production of these rings is correlated with short intermodal distances and small pith transversal area. This phenomenon seems to be caused by minor intrannual pluviometric variation that affects both primary and secondary growth. This new methodological approach helps morphologists and anatomists interpret growth patterns in tropical trees in a more holistic way.
Botany 2010
Rhode Island, United States

hal-01032389
https://hal.archives-ouvertes.fr/hal-01032389

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
This study aims at better understanding the respective influences of specific gravity (γ), microfibril angle (MFA), and cell-wall matrix polymers on viscoelastic vibrational properties of wood in axial direction. The wide variations of properties between normal wood (NW) and compression wood (CW) are in focus. Three young bent trees (Picea abies, Pinus sylvestris and Pinus pinaster) that recovered verticality were sampled. Several observed differences between NW and CW were highly significant in terms of anatomical, physical (γ, shrinkage, CIELab colorimetry), mechanical (compressive strength), and vibrational properties. Specific dynamic modulus of elasticity (E'/γ) decreases with increasing MFA, and Young's modulus (E') can be satisfactorily explained by γ and MFA. Apparently, the type of the cell wall polymer matrix is not influential in this regard. The damping coefficient (tanδ) does not depend solely on MFA of NW and CW. The tanδ - E'/γ relationship evidences that, at equivalent E'/γ, the tanδ of CW is approx. 34% lower than that of NW. This observation is ascribed to the more condensed nature of CW lignins, and this is discussed in the context of previous findings in other hygrothermal and time/frequency domains. It is proposed that the lignin structure and the amount and type of extractives, which are both different in various species, are partly responsible for taxonomy-related damping characteristics.
ISSN: 0018-3830

hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062/document
https://hal.archives-ouvertes.fr/hal-00808062/file/Changes_viscoelastic_vibrational_Bremaud_al.pdf
DOI : 10.1515/hf-2011-0186

Éditeur(s) : HAL CCSD
Résumé : International audience
Tension wood, a tissue developed by angiosperm trees to actively recover their verticality, has long been defined by the presence of an unlignified cellulosic inner layer in the cell wall of fibres, called the G-layer. Although it was known that some species have no G-layer, the definition was appropriate since it enabled easy detection of tension wood zones using various staining techniques for either cellulose or lignin. For several years now, irrespective of its anatomical structure, tension wood has been defined by its high mechanical internal tensile stress. This definition enables screening of the diversity of cell walls in tension wood fibres. Recent results obtained in tropical species with tension wood with a delay in the lignification of the G-layer opened our eyes to the effective presence of large amounts of lignin in the G-layer of some species. This led us to review older literature mentioning the presence of lignin deposits in the G-layer and give them credit. Advances in the knowledge of tension wood fibres allow us to reconsider some previous classifications of the diversity in the organisation of the fibre walls of the tension wood.
ISSN: 0928-1541

hal-01636686
https://hal.archives-ouvertes.fr/hal-01636686
https://hal.archives-ouvertes.fr/hal-01636686/document
https://hal.archives-ouvertes.fr/hal-01636686/file/2017_Ghislain-Clair_IAWAJ_DiversityOrganisationLignificationTensionWoodFibreWalls-AReview.pdf
DOI : 10.1163/22941932-20170170

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A
Résumé :  
The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called the G-layer, in the fibre cell wall. The structure of the G-layer has recently been described as a hydrogel thanks to N2 adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2-50 nm). This led us to revisit the concept of the G-layer that had been, until now, only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with a typical thick G-layer while it is much less with a thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without a G-layer is as low as in normal wood. Not depending on the amount of pores, the pore size distribution is always centred around 6-12 nm. These results suggest that, among species producing fibres with a G-layer, large structural differences of the G-layer exist between species.
Journal of Experimental Botany

hal-01032161
https://hal.archives-ouvertes.fr/hal-01032161
DOI : 10.1093/jxb/erp133

Éditeur(s) : HAL CCSD
Résumé :  
The gelatinous layer (G-layer) of tension wood fibres in hardwood contributes to the mechanical function of the living tree and has significant consequences on properties of solid wood. Its size, shape and structure observed by optical or electron microscopy exhibits characteristic anatomical features. However, we found that sectioning of non-embedded wood samples results in an uncontrolled swelling of the G-layer was monitored by serial sections, from an embedded wood sample, from its trimmed transverse face to that located several hundreds of micrometers deep. The results revealed that the initial cutting before embedding produced a border effect responsible for the swollen nature, which is similar to sections from non-embedded material. After a conventional embedding technique was applied, a section of at least 30 micrometres below the trimming surface is required to observe an un-swollen G-layer.
IAWA Journal

hal-01032054
https://hal.archives-ouvertes.fr/hal-01032054

Éditeur(s) : HAL CCSD CRC Press
Résumé : Among the ecosystem services provided by forests, wood provisioning takes a central position. Wood and derived products have played a critical role in the evolution of human kind and demand for raw material is increasing in a foreseeable future. Wood is used for energy production, construction and a wide variety of products for which different properties are required. Anatomical, chemical and physical properties of wood are determined through a complex process called xylogenesis controlled by internal and external signals and occurring during the life of the tree. In this chapter we describe i/how wood is formed and ii/the different factors controlling this developmental process with emphasis on the molecular machinery involved, iii/the functions of wood and iv/the biotechnology approaches developed to improve wood biomass production and properties genetically.
Tree Biotechnology

ISBN : 9781466597143
hal-01204210
https://hal.archives-ouvertes.fr/hal-01204210
PRODINRA : 257126

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Studies on tree biomechanical design usually focus on stem stiffness, resistance to breakage or uprooting, and elastic stability. Here we consider another biomechanical constraint related to the interaction between growth and gravity. Because stems are slender structures and are never perfectly symmetric, the increase in tree mass always causes bending movements. Given the current mechanical design of trees, integration of these movements over time would ultimately lead to a weeping habit unless some gravitropic correction occurs. This correction is achieved by asymmetric internal forces induced during the maturation of new wood. The long-term stability of a growing stem therefore depends on how the gravitropic correction that is generated by diameter growth balances the disturbance due to increasing self weight. General mechanical formulations based on beam theory are proposed to model these phenomena. The rates of disturbance and correction associated with a growth increment are deduced and expressed as a function of elementary traits of stem morphology, cross-section anatomy and wood properties. Evaluation of these traits using previously published data shows that the balance between the correction and the disturbance strongly depends on the efficiency of the gravitropic correction, which depends on the asymmetry of wood maturation strain, eccentric growth, and gradients in wood stiffness. By combining disturbance and correction rates, the gravitropic performance indicates the dynamics of stem bending during growth. It depends on stem biomechanical traits and dimensions. By analyzing dimensional effects, we show that the necessity for gravitropic correction might constrain stem allometric growth in the long-term. This constraint is compared to the requirement for elastic stability, showing that gravitropic performance limits the increase in height of tilted stem and branches. The performance of this function may thus limit the slenderness and lean of stems, and therefore the ability of the tree to capture light in a heterogeneous environment.
ISSN: 0022-5193

hal-00534316
https://hal.archives-ouvertes.fr/hal-00534316
DOI : 10.1016/j.jtbi.2008.10.011

Résumé : Face aux difficultés d’identification des arbres de la famille des Lauracées et dans un but d’établissement d’une production durable et certifiée d’huiles essentielles, l’entreprise KLR a voulu mettre en place un nouvel outil d’identification multi-critères qui consiste à croiser plusieurs types de caractères afin d’obtenir une détermination taxonomique fiable.Trois méthodes d’identification ont été utilisées : la chimie (analyse de l’odeur de l’écorce), le code barre génétique et l’anatomie du bois. Une analyse par positionnement multidimensionnel non-métrique a permis de faire un tri des critères anatomiques du bois pertinents dans l’identification des Lauracées étudiées, au final 14 critères ont été retenus. D’après les données anatomiques dont nous disposons, nous proposons une clé de détermination au genre. En génétique, la technique de code barres de la région chloroplastique intergénique trnH-psbA a été appliquée aux individus récoltés. En comparant les séquences de tous les individus, 40% des individus peuvent être identifiés au genre car ils présentent des haplotypes uniques. Des haplotypes au sein des genres ont été déterminés et permettent d’identifier l’espèce pour 40 à 100 % des individus selon le genre. L’analyse SPME de l’odeur des écorces a permis de définir pour chaque espèce une carte d’identité chimique à partir des molécules majoritaires. Des chémotypes ont été définis au sein des espèces Licaria cannella, Ocotea indirectinervia et Sextonia rubra. Ces trois domaines d’observation ont permis de constituer une base de type Xper2 pour l’identification.Un criblage des essences intéressantes de par leur rendement en huile essentielle a été effectué. En ce qui concerne la partie extraction de l’huile essentielle, trois espèces montrent un rendement en huile essentielle de l’écorce supérieur à 0,3% et 5 espèces montrent un rendement en huile essentielle du bois supérieur à 0,3%. Les évaluations olfactives menées par un expert ont permis de séparer les huiles distillées en 5 différentes notes. Nous avons jugé intéressant de savoir si l’outil d’identification multicritère pouvait prédire les compositions et rendements en huile essentielle de l’espèce identifiée avant l’abattage de l’arbre. Des études complémentaires ont donc été menées. Pour plus de la moitié des arbres, la signature de l’écorce, la composition de l’huile essentielle de l’écorce et la composition de l’huile essentielle du bois sont similaires. La tentative d’établir un lien entre les caractéristiques des cellules à huile et le rendement s’est avérée infructueuse.
In order to develop a sustainable production of certified essential oils extracts, the compangy KLR has struggled with the identification of the trees from the family of Lauraceae. This is the main reason that led to the project of creating an identification tool for this family.This tool would be based on three approaches: chemistry (chemical signature of the dark), wood anatomy and genetic barcoding. By means of a non-metric multidimensional scaling analysis, we selected a list of 14 relevant wood anatomical features that can identify the trees to the genera. For the genetics, the barcoding of trnH-psbA an intergenic region of the DNA has been used. When comparing all the sequences from all the individuals, 40% of the individuals can be identified to the genera because of their specific haplotype. Haplotypes within the genera have also been established. Chemical identity cards have been set with the SPME analysis technique and chemotypes have been defined inside the species Licaria cannella, Ocotea indirectinervia and Sextonia rubra. These three identification approaches allowed us to construct an identification tool on Xper².During the study, we aimed to screen what species would be interesting for its essential oil yield. Three species showed an essential oil bark yield above 0.3%. five species showed an essential oil wood yield above 0.3%. An expert held an olfactory evaluation on the oils and divided the essential oils in five olfactory groups. We found it relevant to improve the identification tool by trying to predict the compositions of the oils before the three was cut down. In the case of the half of trees studied by SPME analyses, the composition of the wood and the bark essential oils were similar. On the other hand, no link was found between the oil cells dimensions and the essential oil yield.

http://www.theses.fr/2012AGUY0516/document

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Tension wood of Laetia procera (Poepp.) Eichl. (Flacourtiaceae), a neo-tropical forest species, shows a peculiar secondary wall structure, with an alternance of thick and thin layers, while opposite wood of this species has a typical secondary wall structure (S1 + S2 + S3). Samples for the study of microstructural properties were collected upon the estimation of growth stresses in the living tree, in order to analyze the correlation of the former with the latter. Investigation using optical microscopy, scanning electron microscopy and UV microspectrophotometry allowed the description of the anatomy, ultra-structure and chemistry of this peculiar polylaminate secondary wall. In the thick layers, cellulose microfibril angle is very low (i.e., microfibril orientation is close to fibre axis) and cellulose microfibrils are well organized and parallel to each other. In the thin layers, microfibrils (only observable in the inner layer) are less organized and are oriented with a large angle relative to the axis of the cell. Thick layers are lightly lignified although thin layers show a higher content of lignin, close to that of opposite wood secondary wall. The more the wood was under tensile stress, the less the secondary wall was lignified, and lower the syringyl on guaiacyl lignin units' ratio was. The innermost layer of the secondary wall looks like a typical S3 layer with large microfibril angle and lignin occurrence. The interest of this kind of structure for the understanding of stress generation is discussed.
ISSN: 0931-1890

hal-00194923
https://hal.archives-ouvertes.fr/hal-00194923
https://hal.archives-ouvertes.fr/hal-00194923/document
https://hal.archives-ouvertes.fr/hal-00194923/file/Trees_RuelleYoshidaClairThibaut_submitted2006.pdf
DOI : 10.1007/s00468-007-0128-0

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Gravitropism is necessary for plants to control the orientation of their axes while they grow in height. In woody plants, stem re-orientations are costly because they are achieved through diameter growth. The functional diversity of gravitropism was studied to check if the mechanisms involved and their efficiency may contribute to the differentiation of height growth strategies between forest tree species at the seedling stage. Seedlings of eight tropical species were grown tilted in a greenhouse, and their up-righting movement and diameter growth were measured during three months. Morphological, anatomical and biomechanical traits were measured at the end of the survey. Curvature analysis was used to analyse the up-righting response along the stems. Variations in stem curvature depend on diameter growth, size effects, the increase in self-weight, and the efficiency of the gravitropic reaction. A biomechanical model was used to separate these contributions. Results showed that (1) gravitropic movements were based on a common mechanism associated to similar dynamic patterns, (2) clear differences in efficiency (defined as the change in curvature achieved during an elementary diameter increment for a given stem diameter) existed between species, (3) the equilibrium angle of the stem and the anatomical characters associated to the efficiency of the reaction also differed between species, (4) the differences in gravitropic reaction were related to the light requirements: heliophilic species, compared to more shade-tolerant species, had a larger efficiency and an equilibrium angle closer to vertical. This suggests that traits determining the gravitropic reaction are related to the strategy of light interception and may contribute to the differentiation of ecological strategies promoting the maintenance of biodiversity in tropical rain forests.
ISSN: 0022-0957

hal-00797023
https://hal.archives-ouvertes.fr/hal-00797023
https://hal.archives-ouvertes.fr/hal-00797023/document
https://hal.archives-ouvertes.fr/hal-00797023/file/Functional_diversity_gravitropic_Almeras_al.pdf