Éditeur(s) : HAL CCSD
Résumé :  
Wood samples were taken from the upper and lower sides of 21 naturally tilted trees from 18 families of angiosperms in the tropical rain forest in French Guyana. The measurement of growth stresses ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile stressed wood on the upper side, called tension wood, and lower tensile stressed wood on the lower side, called opposite wood. Eight species had tension wood fibres with a distinct gelatinous layer (G-layer). The distribution of gelatinous fibres varied from species to species. One of the species, Casearia javitensis (Flacourtiaceae), showed a peculiar multilayered secondary wall in its reaction wood. Comparison between the stress level and the occurrence of G-layer indicates that the G-layer is not a key factor in the production of high tensile stressed wood.
IAWA Journal

hal-01032051
https://hal.archives-ouvertes.fr/hal-01032051

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Variation of dead wood decay rates among tropical trees remains one source of uncertainty in global models of the carbon cycle. Taking advantage of a broad forest plot network surveyed for tree mortality over a 23-year period, we measured the remaining fraction of boles from 367 dead trees from 26 neotropical species widely varying in wood density (0.23–1.24 g cm-3) and tree circumference at death time (31.5–272.0 cm). We modeled decay rates within a Bayesian framework assuming a first order differential equation to model the decomposition process and tested for the effects of forest management (selective logging vs. unexploited), of mode of death (standing vs. downed) and of topographical levels (bottomlands vs. hillsides vs. hilltops) on wood decay rates. The general decay model predicts the observed remaining fraction of dead wood (R2 = 60%) with only two biological predictors: tree circumference at death time and wood specific density. Neither selective logging nor local topography had a differential effect on wood decay rates. Including the mode of death into the model revealed thatstanding dead trees decomposed faster than downed dead trees, but the gain of model accuracy remains rather marginal. Overall, these results suggest that the release of carbon from tropical dead trees to the atmosphere can be simply estimated using tree circumference at death time and wood density.
ISSN: 0029-8549

hal-01094187
https://hal-agroparistech.archives-ouvertes.fr/hal-01094187
DOI : 10.1007/s00442-010-1602-8

Éditeur(s) : HAL CCSD
Résumé : International audience
Radiocarbon dating and "old wood problem" in the Antilles : the state of the artAmong the many effects that may distort the interpretation of radiocarbon dates are those for which the age of the archaeological event is different from the radiocarbon age of the sample or "14C event" age. This type of problem arises in many cases, notably in the "old wood effect”, and occurs in various regions of the world where very long-lived trees species are common. In the Caribbean anthracological studies indicate a very high frequency of some indigenous centuries-old species such as Guaiacum, Guaiacum officinale L. However the absence of tree-ring data in humid tropical zones deprives us of an accurate inventory of long-lived species and especially the assessment of their longevity. Here we present measurements which enable us to estimate the longevity of archaeological Guaiacum wood posts. They highlight a gap of several centuries between wood from the outer edge and the heart of the tree. This example illustrates the additional uncertainty that can result from dating archeological events when dates are realized on unidentified botanical species from which the area that was sampled is unknown. Another source of error could arise from the use of rot-proof dead wood as fuel if we take into consideration that major hurricanes can produce large amounts of dead wood that may be collected for decades, even centuries. To improve chronometric data used in archaeological interpretations, it is necessary to ensure the quality of the dating process by following a protocol similar to those used in other regions of the world based on a better understanding of the material to be dated by preliminary identifications of wood samples: species, anatomical part, wood moisture content (unseasoned or seasoned).
Radiocarbono y "problema madera vieja", que data de las Antillas: estado del arteEntre los muchos efectos que pueden distorsionar la interpretación de fechas de radiocarbono, destacan aquellos para los que la edad de la prueba arqueológica es diferente de la edad de radiocarbono de la muestra, o la edad del "evento de radiocarbono." Este tipo de problema se presenta en muchos casos, especialmente uno llamado "efecto madera vieja." Esto se refleja en diversas regiones del mundo donde las especies de plantas de mucha longevidad son comunes. En el Caribe, los estudios antracológicos disponibles indican una muy alta frecuencia de algunas especies autóctonas como el guayaco, Guaiacum officinale L. Sin embargo, la casi ausencia de datos de anillos de árboles en los trópicos húmedos, nos impide realizar un inventario exacto de especies de mucha longevidad y sobre todo la evaluación de la longevidad. Algunas de las pruebas presentadas aquí permitieron una estimación de la longevidad de de unos postes de guayaco de origen arqueológico. Ponen de manifiesto una brecha de varios siglos entre las partes externas y el corazón del tronco. Este ejemplo ilustra la aparición de una incertidumbre adicional en la datación de los eventos arqueológicos cuando no conocemos la especie botánica y tampoco la zona de la muestra en el árbol. Otra fuente de error puede surgir de la utilización de la madera muerta de calidad duradera como combustible ya que los grandes huracanes pueden producir grandes cantidades de madera muerta, que puede ser requerida durante décadas, incluso siglos. Para mejorar los datos cronométricos utilizados en interpretaciones arqueológicas, es necesario asegurarse de la calidad de las fechas, y por lo tanto seguir un protocolo similar a los utilizados en otras regiones fundado en una mejor comprensión de los elementos: especie, parte anatómica, humedad de la madera usada (verde o seco).
Parmi les nombreux effets susceptibles de fausser l’interprétation des datations par le radiocarbone, figurent ceux pour lesquels l’âge de l’événement archéologique est différent de l’âge radiocarbone de l’échantillon, ou âge de l’« événement radiocarbone ». Ce type de problème se pose dans de nombreux cas, en particulier celui dénommé « effet vieux bois ». Cette question est prise en compte dans diverses régions du monde où des espèces végétales très longévives sont fréquentes. Dans les Antilles les études anthracologiques disponibles indiquent une fréquence très importante de certaines espèces autochtones multiséculaires dont le gaïac, Guaiacum officinale L.. Cependant, la quasi absence de données dendrochronologiques dans la zone tropicale humide, nous privent d’un inventaire précis des espèces longévives et surtout de l’évaluation de leur longévité. Quelques tests présentés ici ont permis une estimation de la longévité de poteaux d’origine archéologique en bois de gaïac. Ils mettent en évidence un décalage de plusieurs siècles entre les parties externes et le cœur du tronc. Cet exemple illustre l’apparition d’une incertitude supplémentaire dans la datation de l’événement archéologique lorsque que l’on ne connaît ni l’espèce botanique ni la zone de prélèvement dans l’arbre. Une autre source d’erreur pourrait provenir de l’utilisation de bois mort de qualité très durable comme combustible, sachant que les grands cyclones peuvent produire d’importantes quantités de bois mort susceptible d’être récolté pendant des décennies, voire des siècles. Afin d’améliorer les données chronologiques utilisées dans les interprétations archéologiques, il apparaît nécessaire de s’assurer de la qualité des datations, et donc de suivre un protocole similaire à ceux utilisés dans d’autres régions basé sur une meilleure connaissance des éléments datés : espèce, partie anatomique, humidité du bois utilisé (vert ou sec).
Puerto Rico 2013 : Actas del 25to Congreso Internacional de Arqueología del Caribe - Proceeding of the 25th International Congress for Caribbean Archeology - Comptes rendus des communications du 25e Congrés International de l'Archéologie de la Caraïbe
San-Juan, Puerto Rico

hal-01198567
https://hal.archives-ouvertes.fr/hal-01198567
https://hal.archives-ouvertes.fr/hal-01198567/document
https://hal.archives-ouvertes.fr/hal-01198567/file/Stouvenot%20et%20al.%202015.%20Effet%20vieux%20bois%20radiocarbone%20Antilles%20HD.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The study of decay resistance in wood is of interest for wood end-users but also for the global carbon balance since wood biodegradation is a key driver of forest ecosystem functioning through its impacts on carbon and nutrient cycling. We studied the density and wood extractive contents in order to understand decay resistance against soil microflora after 90 days exposure of sapwood and heartwood from three Neotropical wood species known for their decay resistance: Bocoa prouacensis, Vouacapoua americana, Inga alba. Decay resistance was correlated with density more than wood extractive content. The results highlighted different decay resistance strategies. In B. prouacensis, both sapwood and heartwood were highly resistant due to the high density and high content of antifungal wood extractives. In V. americana heartwood, decay resistance was due to the high synergistic-acting wood extractive content. Conversely, with the least dense wood species I. alba, we found that decay resistance was due to the antifungal wood extractives synthesized early in the sapwood. In conclusion, we showed that the three wood species with the same level of heartwood decay resistance performance had different decay resistance strategies according to the anatomic and defensive wood traits.
ISSN: 0964-8305

hal-01321162
https://hal.archives-ouvertes.fr/hal-01321162
https://hal.archives-ouvertes.fr/hal-01321162/document
https://hal.archives-ouvertes.fr/hal-01321162/file/Art_Amusant_al_Diversity_decay_resistance_strategies_Int.Biodet.Biodegr._2014.pdf
DOI : 10.1016/j.ibiod.2014.06.012

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Challenging evaluation of tropical forest biodiversity requires the reporting of taxonomic diversity but also the systematic characterization of wood properties in order to discover new promising species for timber industry. Among wood properties, the dimensional stability is regarded as a major technological characteristic to validate whether a wood species is adapted to commercial uses. Cell structure and organization are known to influence the drying shrinkage making wood density and microfibrils angle markers of choice to predict wood dimensional stability. On the contrary the role of wood extractive content remains unclear. This work focuses on the fast-growing tropical species Bagassa guianensis and we report herein a correlation between heartwood drying shrinkage and extractive content. Chemical extractions and shrinkage experiments were performed on separate wood twin samples to better evaluate correctly how secondary metabolites influence the wood shrinkage behaviour. Extractive content were qualitatively and quantitatively analysed using HPLC and NMR spectroscopy. We found that B guianensis heartwood has a homogeneous low shrinkage along its radius that could not be explained only by its basic density. In fact the low drying shrinkage is correlated to the high extractive content and a corrected model to improve the prediction of wood dimensional stability is presented. Additionally NMR experiments conducted on sapwood and heartwood extracts demonstrate that secondary metabolites biosynthesis occurs in sapwood thus revealing B. guianensis as a Juglans-Type heartwood formation. This work demonstrates that B. guianensis, a fast-growing species associated with high durability and high dimensional stability, is a good candidate for lumber production and commercial purposes.
ISSN: 1932-6203

hal-01392725
https://hal.archives-ouvertes.fr/hal-01392725
https://hal.archives-ouvertes.fr/hal-01392725/document
https://hal.archives-ouvertes.fr/hal-01392725/file/2016_BossuBeaucheneEstevezDuplaisClair_PlosOne_WoodDimentionalStabilityAndSecondaryMetabolites.pdf
DOI : 10.1371/journal.pone.0150777.s005

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
Context and aim : This study aimed to examine the effect of the tension wood G‐layer on the viscoelastic properties of wood. Methods : Tension wood and opposite wood samples were obtained from six French Guianese tropical rainforest species (Sextonia rubra, Ocotea guyanensis, Inga alba, Tachigali melinoni, Iyranthera sagotiana and Virola michelii); the tension wood of the former three of these species had a Glayer, whilst the tension wood from the latter three had no Glayer. Tensile dynamic mechanical analysis (DMA) was performed on green never dried wood samples in the longitudinal direction with samples submerged in a water bath at a temperature (30°C) and frequency (1 Hz) representative of the conditions experienced by wood within a living tree. Then, DMA was repeated with samples conditioned to an air-dried state. Finally, samples were oven-dried to measure longitudinal shrinkage. Results : Tension wood did not always have a higher longitudinal storage (elastic) modulus than opposite wood from the same tree regardless of the presence or absence of a G‐layer. For the species containing a G‐layer, tension wood had a higher damping coefficient and experienced a greater longitudinal shrinkage upon drying than opposite wood from the same species. No difference was found in damping coefficients between tension wood and opposite wood for the species that had no G‐layer. Conclusion : It is proposed that the different molecular composition of the G-layer matrix has an influence on the viscoelasticity of wood, even if a biomechanical gain is not yet clear. This study shows that rheological properties and longitudinal shrinkage can be used to detect the presence of a G‐layer in tension wood.
ISSN: 1286-4560

hal-00677460
https://hal.archives-ouvertes.fr/hal-00677460
https://hal.archives-ouvertes.fr/hal-00677460/document
https://hal.archives-ouvertes.fr/hal-00677460/file/Clair2.pdf
DOI : 10.1007/s13595-011-0164-1

Résumé : Arbol de hasta 18 m de alto. Hojas pecioladas, subcoriáceas, oblongo elípticas a lanceoladas, agudamente acuminadas, pinnado nervadas de hasta 13 cm de longitud. Inflorescencias estaminadas de 3 a 20 flores; las pistiladas usualmente de una sola flor; flores pequeñas, amarillo cremosas. Fruto piriforme o subgloboso (nuez) de hasta 5 cm, colgante, rojizo o amarillento, con dos valvas; semilla con arilo escarlata.
Arbre pouvant atteindre 18 m de haut. Feuilles pétiolées, presque coriaces, oblongo-elliptiques à lancéolées, terminées en pointe très fine, pennatinnervées pouvant atteindre 13 cm de long. Inflorescences staminées de 3 à 20 fleurs; celles qui sont pourvues d’un pistil ont habituellement une seule fleur; fleurs petites, jaunes-crèmes. Fruit piriforme ou presque arrondi pouvant atteindre 5 cm, tombant, rougeâtre ou jaunâtre, bivalve; graine avec arille écarlate.
Tree dioecious 6-18 m high with a dense crown and aromatic wood.  Leaves simple, alternate, oblong-elliptic, acutely acuminate, pinnately veined, dark green shiny above, paler beneath, 5-15 cm x 2-7 cm; male inflorescences usually 1-10 flowered cyme, fragrant, pale yellow, female inflorescences a 1-3 flowered cyme, but usually 1-flowered, pale yellow; fruit a fleshy, smooth, yellow, sub-globose, drupe, 3-6 cm long with a circumferential, longitudinal ridge; seed brown, ovoid 1.5-4.5cm long covered with a lacinate, red aril.
Nativa de Asia tropical, cultivada en los trópicos del resto del mundo.
Originaire d’;Asie tropicale, cultivée dans les tropiques du reste du monde.
Native to tropical Asia, cultivated in tropical regions around the world.

http://www.tramil.net/fototeca/plant239

Résumé : Arbusto o árbol de hasta 20 m. Hojas oblongas a anchamente aovadas, de 3 a 15 cm, agudas a acuminadas, aserradas, estrellado-tomentosas, marcadamente asimétricas. Flores amarillentas, fragantes, en cimas axilares pequeñas, con 5 pétalos de 3 mm. Fruto leñoso, globoso u oval, de 2 a 4 cm, con tubérculos duros.
Arbuste ou arbre pouvant atteindre 20 m. Feuilles oblongues à largement ovées, de 3 à 15 cm, aiguës à acuminées, dentées, en forme d’étoile, tomenteuses, très asymétriques. Fleurs jaunâtres, odorantes, sur de petites tiges axillaires, avec 5 pétales de 3 mm. Fruit ligneux, arrondi ou ovale, de 2 à 4 cm, avec tubercules fermes.
Tree deciduous up to 16 m tall with spreading branches. Leaves alternate 20 cm x 7 cm, lanceolate to ovate, unequal at the base, margins crenate-dentate, hairy from sub-glabrous to tomentose; inflorescence axillary in panicles, flowers 3 mm with five yellow-green petals, fragrant; fruit black, woody, warty, sub-globose 1-2 cm in diameter with the faint smell of molasses, seeds numerous.
Regiones tropicales del continente americano.
Régions tropicales du continent américain.
Tropical and sub-tropicalregions of the American continent.

http://www.tramil.net/fototeca/plant179

Éditeur(s) : HAL CCSD
Résumé : International audience
The anatomy of tension wood and opposite wood was compared in 21 tropical rain forest trees from 21 species belonging to 18 families from French Guyana. Wood specimens were taken from the upper and lower sides of naturally tilted trees. Measurement of the growth stress level ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile-stressed wood on the upper side, called tension wood and normally tensile-stressed wood on the lower side, called opposite wood. Quantitative parameters relating to fibres and vessels were measured on transverse sections of both tension and opposite wood to check if certain criteria can easily discriminate the two kinds of wood. We observed a decrease in the frequency of vessels in the tension wood in all the trees studied. Other criteria concerning shape and surface area of the vessels, fibre diameter or cell wall thickness did not reveal any general trend. At the ultrastructural level, we observed that the microfibril angle in the tension wood sample was lower than in opposite wood in all the trees except one (Licania membranacea).
IAWA Journal

hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915/document
https://hal.archives-ouvertes.fr/hal-00194915/file/IAWA2006_RuelleClairBeauchenePrevostFournier_ccsd.pdf
IRD : PAR00001321

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
The seasonal climate drivers of the carbon cycle in tropical forests remain poorly known, although these forests account for more carbon assimilation and storage than any other terrestrial ecosystem. Based on a unique combination of seasonal pan-tropical data sets from 89 experimental sites (68 include aboveground wood productivity measurements and 35 litter productivity measurements), their associated canopy photosynthetic capacity (enhanced vegetation index, EVI) and climate, we ask how carbon assimilation and aboveground allocation are related to climate seasonality in tropical forests and how they interact in the seasonal carbon cycle. We found that canopy photosynthetic capacity seasonality responds positively to precipitation when rainfall is < 2000 mm yr(-1) (water-limited forests) and to radiation otherwise (light-limited forests). On the other hand, independent of climate limitations, wood productivity and litterfall are driven by seasonal variation in precipitation and evapotranspiration, respectively. Consequently, light-limited forests present an asynchronism between canopy photosynthetic capacity and wood productivity. First-order control by precipitation likely indicates a decrease in tropical forest productivity in a drier climate in water-limited forest, and in current light-limited forest with future rainfall < 2000 mm yr(-1).
ISSN: 1726-4170

hal-01557759
https://hal.univ-lorraine.fr/hal-01557759
https://hal.univ-lorraine.fr/hal-01557759/document
https://hal.univ-lorraine.fr/hal-01557759/file/bg-13-2537-2016.pdf
DOI : 10.5194/bg-13-2537-2016

Éditeur(s) : HAL CCSD Wiley
Résumé : 1. Trade-offs among functional traits reveal major plant strategies that can give insight into species distributions and ecosystem processes. However, current identification of plant strategies lacks the integration of root structural traits together with leaf and stem traits. 2. We examined correlations among 14 traits representing leaf, stem and woody root tissues. Traits were measured on 1084 individuals representing 758 Neotropical tree species, across 13 sites representative of the environmental variation encompassed by three widespread habitats (seasonally flooded, clay terra firme and white-sand forests) at opposite ends of Amazonia (French Guiana and Peru). 3. Woody root traits were closely aligned with stem traits, but not with leaf traits. Altogether leaf, stem and woody root traits delineated two orthogonal axes of functional trade-offs: a first axis defined by leaf traits, corresponding to a leaf economics spectrum, and a second axis defined by covarying stem and woody root traits, corresponding to a wood economics spectrum. These axes remained consistent when accounting for species evolutionary history with phylogenetically independent contrasts. 4. Despite the strong species turnover across sites, the covariation among root and stem structural traits as well as their orthogonality to leaf traits were strongly consistent across habitats and regions. 5. We conclude that root structural traits mirrored stem traits rather than leaf traits in Neotropical trees. Leaf and wood traits define an integrated whole-plant strategy in lowland South American forests that may contribute to a more complete understanding of plant responses to global changes in both correlative and modelling approaches. We suggest further meta-analyses in expanded environmental and geographic zones to determine the generality of this pattern.
ISSN: 0269-8463

hal-01032415
https://hal.archives-ouvertes.fr/hal-01032415
DOI : 10.1111/j.1365-2435.2012.02020.x

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : The fixation of carbon in tropical forests mainly occurs through the production of wood and leaves, both being the principal components of net primary production. Currently field and satellite observations are independently used to describe the forest carbon cycle, but the link between satellite-derived forest phenology and field-derived forest productivity remains opaque. We used a unique combination of a MODIS enhanced vegetation index (EVI) dataset, a wood production model based on climate data and direct litterfall observations at an intra-annual timescale in order to question the synchronism of leaf and wood production in tropical forests. Even though leaf and wood biomass fluxes had the same range (respectively 2.4 +/- 1.4 and 2.2 +/- 0.4 Mg C ha(-1) yr(-1)), they occurred separately in time. EVI increased with leaf renewal at the beginning of the dry season, when solar irradiance was at its maximum. At this time, wood production stopped. At the onset of the rainy season, when new leaves were fully mature and water available again, wood production quickly increased to reach its maximum in less than a month, reflecting a change in carbon allocation from short-lived pools (leaves) to long-lived pools (wood). The time lag between peaks of EVI and wood production (109 days) revealed a substantial decoupling between the leaf renewal assumed to be driven by irradiance and the water-driven wood production. Our work is a first attempt to link EVI data, wood production and leaf phenology at a seasonal timescale in a tropical evergreen rainforest and pave the way to develop more sophisticated global carbon cycle models in tropical forests.
ISSN: 1726-4170

hal-01268497
https://hal.archives-ouvertes.fr/hal-01268497
DOI : 10.5194/bg-10-7307-2013
PRODINRA : 256018

Éditeur(s) : HAL CCSD
Résumé : International audience
Over the past decade, much attention has been devoted to the development of forest biomass estimation methods at a stand scale, leading to the establishment of allometric models (Chave et al., 2014). These allometric equations use a unique wood specific gravity value (WSG) per species, but neglect the within tree variations of WSG found by others (Wiemann & Williamson, 1989).The main objectives of this study are (1) to illustrate the diversity of radial (from pith to bark) and longitudinal (from bottom to top) patterns of WSG variation within and between species, (2) to highlight different trends of WSG radial variations and the possible misinterpretations of these trends due to the effect of heartwood and (3) to link these variations and patterns to the successional status of the species (from pioneer to sciaphilic species).We sampled 33 small trees (10 Wood sciences underpinning tropical ecology and management. International closing symposium of the XYLAREDD project.
Tervuren, Belgium

hal-01188894
https://hal-sde.archives-ouvertes.fr/hal-01188894

Éditeur(s) : HAL CCSD
Résumé :  
The anatomy of tension wood and opposite wood was compared in 21 tropical rain forest trees from 21 species belonging to 18 families from French Guyana. Wood secimens were taken from the upper and lower sides of naturally titled trees. Measurement of the growth stress level ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile-stressed wood on the upper side, called tension wood and normally tensile-stressed wood on the lower side, called opposite wood. Quantitative parameters relating to fibres and vessels were measured on transverse sections of both tension and opposite wood to check if certain criteria can easily discriminate the two kinds of wood. We observed a decrease in the frequency of vessels in the tension wood in all the trees studied. Other criteria concerning shape and surface area of the vessels, fibre diameter or cell wall thickness did not reveal any general trend.At the ultrastructural level, we observed that the microfibril angle in the tension wood sample was lower than in opposite wood in all the trees except one (Licania membranacea).
IAWA Journal

hal-01032149
https://hal.archives-ouvertes.fr/hal-01032149

Résumé : Arbol de hasta 15 m de alto con corteza blanquecina, suave y madera dura y pesada. Hojas obovadas o elípticas, obtusas, con venación finamente reticulada, corto pecioladas. Panículas con flores blancas, glandulosas; cáliz con 5 lóbulos. Fruto ovoide, negro al madurar.
Arbre pouvant atteindre 15 m de haut, écorce blanchâtre et douce, bois dur et lourd. Feuilles obovées ou elliptiques, obtuses, à nervation finement réticulée, avec un court pétiole. Panicules avec fleurs blanches glanduleuses; calice à 5 lobes. Fruit ovoïde, noir une fois parvenu à maturité.
Evergreen tree up to 15 m high with smooth, whitish, variegated and flaking bark, hard and heavy wood.  Leaves simple, entire, opposite in pairs, dark green, leathery, oblong to elliptic, obtuse at the tip, rounded at the base, 15-20 x 5-7 cm, prominent  venation, highly aromatic when crushed; inflorescence a compound panicle 5-10 cm long, flowers numerous 3-4 mm long, white; fruit a subglobose to ellipsoid berry, 8-10 mm long, thickly covered with small convex glands, black when ripe.
Nativa del norte de Sudamérica y las Antillas, cultivada en los trópicos.
Originaire du nord de l’;Amérique du Sud et des Antilles, cultivée sous les tropiques.
Native to northern South America and the Antilles, cultivated in the tropics.

http://www.tramil.net/fototeca/plant280

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Coarse woody debris (CWD, dead wood sections a parts per thousand yen10 cm diameter) represents a large store of carbon in tropical forests; however, estimates of the flux of carbon from CWD in these forests remain poorly constrained. The objective of this study was to resolve the dry/wet season response of respiration in CWD (R (cwd)), and investigate the importance of biotic and abiotic factors for predicting the seasonal change of R (cwd) at the ecosystem level. This study presents a 4-month time series of R (cwd) measurements conducted on 42 dead trees (26 species) at the Paracou Research Station in French Guiana. R (cwd) measurements were repeated 13 times on each CWD sample from July to November 2011, spanning the transition from wet to dry season, and then from dry season to the following wet season. Seasonal drought caused monthly R (cwd) to drop by 20.5 +/- A 5.1% over the wet-dry transition. Changes in woody tissue moisture content explained 41.9% of the measured seasonal variability in R (cwd), but 60% of the seasonal variability in mean forest R (cwd) rates could be modelled using surface soil water content. We estimate that R (cwd) is approximately 5% of annual ecosystem respiration (R (eco)) and that seasonal variations in R (cwd) contribute appreciably to seasonal variations of R (eco), and should be included in functional models simulating the response of tropical rainforest ecosystems to current and future climate.
ISSN: 1432-9840

hal-01032431
https://hal.archives-ouvertes.fr/hal-01032431
DOI : 10.1007/s10021-013-9684-x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Functional ecology has long considered the support function as important, but its biomechanical complexity is only just being elucidated. We show here that it can be described on the basis of four biomechanical traits, two safety traits against winds (SW) and self-buckling (SB), and two motricity traits involved in sustaining an upright position, tropic motion velocity (MV) and posture control (PC). All these traits are integrated at the tree scale, combining tree size and shape together with wood properties. The assumption of trait constancy has been used to derive allometric scaling laws, but it was more recently found that observing their variations among environments and functional groups, or during ontogeny, provides more insights into adaptive syndromes of tree shape and wood properties. However, over-simplified expressions have often been used, possibly concealing key adaptive drivers. An extreme case of over-simplification is the use of wood basic density as a proxy for safety. Actually, since wood density is involved in stiffness, loads and construction costs, the impact of its variations on safety is non-trivial. Moreover, other wood features, especially the microfibril angle (MFA), are also involved. Furthermore, wood is not only stiff and strong, but it also acts as a motor for MV and PC. The relevant wood trait for that is maturation strain asymmetry. Maturation strains vary with cell wall characteristics such as MFA, rather than with wood density. Finally, the need for further studies about the ecological relevance of branching patterns, motricity traits and growth responses to mechanical loads is discussed.
ISSN: 0022-0957

hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904/document
https://hal.archives-ouvertes.fr/hal-00909904/file/Integrative_biomechanics_for_tree_Fournier_al.pdf
DOI : 10.1093/jxb/ert279

Éditeur(s) : HAL CCSD
Résumé : Wood samples were taken from the upper and lower sides of 21 naturally tilted trees from 18 families of angiosperms in the tropical rainforest in French Guyana. The measurement of growth stresses ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile stressed wood on the upper side, called tension wood and lower tensile stressed wood on the lower side, called opposite wood. Eight species had tension wood fibres with a distinct gelatinous layer (G-layer). The distribution of gelatinous fibres varied from species to species. One of the species, Casearia javitensis (Flacourtiaceae), showed a peculiar multilayered secondary wall in its reaction wood. Comparison between the stress level and the occurrence of the G-layer indicates that the G-layer is not a key factor in the production of high tensile stressed wood.
IAWA Journal

hal-00112579
https://hal.archives-ouvertes.fr/hal-00112579
https://hal.archives-ouvertes.fr/hal-00112579/document
https://hal.archives-ouvertes.fr/hal-00112579/file/IAWA2006_ClairRuelleBeauchenePrevostFournier_ccsd.pdf
IRD : PAR00001136

Éditeur(s) : HAL CCSD Linnean Society of London
Résumé : International audience
The circumscription of Salicaceae has recently been enlarged to include a majority of the species formerly placed in the polyphyletic tropical family Flacourtiaceae. Several studies have reported a peculiar and infrequently formed multilayered structure of tension wood in four of the tropical genera. Tension wood is a tissue produced by trees to restore their vertical orientation, and most studies have focused on trees developing tension wood by means of cellulose-rich, gelatinous fibres, as is known in Populus L. and Salix L. (Salicaceae s.s.). This study aims to determine if the multilayered structure of tension wood is an anatomical characteristic common in other Salicaceae, and if so, how its distribution correlates to phylogenetic relationships. Therefore, we studied the tension wood of 14 genera of Salicaceae as well as two genera of Achariaceae, one genus of Goupiaceae, and one genus of Lacistemataceae, families closely related to Salicaceae or formerly placed in Flacourtiaceae. Opposite wood and tension wood were compared with light microscopy and 3D Laser Scanning Confocal Microscopy. The results indicate that a multilayered structure of tension wood is common in the family except in Salix, Populus, and one of their closest relatives, Idesia polycarpa Maxim. We suggest that tension wood may be a useful anatomical character in understanding phylogenetic relationships in Salicaceae. Further investigation is still needed on the tension wood of several other putatively close relatives of Salix and Populus, in particular Bennettiodendron Merr., Macrohasseltia L.O.Williams and Itoa Hemsl.
ISSN: 0024-4074

hal-01392845
https://hal.archives-ouvertes.fr/hal-01392845
https://hal.archives-ouvertes.fr/hal-01392845/document
https://hal.archives-ouvertes.fr/hal-01392845/file/GhislainEtAl2016_MultylayerTWSalicaceae_Bot_Jsur the_Lin_Soc_HALssfig.pdf
DOI : 10.1111/boj.12471

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Wood debris are an important component of mangrove marine environments. Current knowledge of the ecological role of wood falls is limited by the absence of information on metazoan colonization processes over time. The aim of this study was to provide insights to their temporal dynamics of wood eukaryotic colonization from a shallow water experiment in a mangrove swamp. Combined in situ chemical monitoring and biological surveys revealed that the succession of colonizers in the mangrove swamp relates with the rapid evolution of sulfide concentration on the wood surface. Sulfide-tolerant species are among the first colonizers and dominate over several weeks when the sulfide content is at its maximum, followed by less tolerant opportunistic species when sulfide decreases. This study supports the idea that woody debris can sustain chemosynthetic symbioses over short time-scale in tropical shallow waters.
ISSN: 0141-1136

hal-01545913
https://hal.archives-ouvertes.fr/hal-01545913
DOI : 10.1016/j.marenvres.2013.03.007