Résumé : Archimedes lived from 287? - 212 BC. He was a Greek mathematician who made discoveries in mechanics and hydrostatics. His famous hydrostatic experiment (Archimedes' Principle) stated thata body immersed in a fluid (e.g., water in the tub) is buoyed up by a force equal to the weight of the fluid displaced by the body.
(Funding) Funded in part by the Institute for Museum and Library Services (IMLS), Ephemeral Cities Project.
Tampa |z 1271000 |2 ceeus
Hillsborough County |z 12057 |2 ceeus
United States of America -- Florida -- Hillsborough County -- Tampa

Droits : All rights reserved. 2005.
C24-05656

Éditeur(s) : Pêche thonière et dispositifs de concentration de poissons, Caribbean-Martinique, 15-19 Oct 1999 15-19 octobre 1999
Résumé : In Curacao, deep-water fads with grp surface buoys were developed and tested. The first fad was deployed in 1993. Up to now, a total of 5 fads were deployed at the following depths: 730, 685, 700, 754 and 574 metres. Changes were made to the surface buoy, resulting in an improved design, the mkii surface buoy. One fad lasted three years and one month. The main features of the design used are: the use of a sparbuoy design with constant tension on the moving chain to avoid slamming and jerking of the surface buoy; liberal use of sacrificial anodes, and maintenance to replace these anodes about once a year; the use of a short anchor chain with depth buoys, that does not touch bottom; a one-piece inverted mushroom anchor. With the grp surface buoy, a reserve buoyancy of approximately 800 kg is obtained with chain as external ballast about 610 kg of net buoyancy remains (it would seem that the reserve buoyancy needed where strong currents occur, has been underestimated in many designs). Five new grp mkii buoys are now under construction. Utilizing the experience gained with the deep-water fads, two new types of fads made of 500 mm diameter pvc tubes were designed to be used in waters of shallow and medium depth (150-400 m). One design uses a 3-m length of pvc tube, the other a 5-m tube (500 mm diameter). One fad with 3-m pvc buoy has been tested succesfully, two 5-m pvc buoys are under construction. The use of pvc results in a buoy which is substantially less expensive than a grp buoy. On the other hand, this type of buoy can probably not withstand the same forces as a grp buoy and we assume that for use in deeper waters the grp mkii buoy will still be needed.

Droits : Ifremer
http://archimer.ifremer.fr/doc/00042/15288/12674.pdf
http://archimer.ifremer.fr/doc/00042/15288/

Éditeur(s) :  :
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Collectivité territoriale de Martinique. Bibliothèque Schoelcher
Permalien : http://www.manioc.org/patrimon/SCH13247
SCH13247

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Numerical models show that small-scale convection (SSC) occurring atop a mantle plume is a plausible mechanism to rejuvenate the lithosphere. The triggering of SSC depends on the density contrast and on the rheology of the unstable layer underlying the stagnant upper part of the thermal boundary layer (TBL). Partial melting may change both properties. We analyze, using 2-D numerical simulations, how partial melting influences the dynamics of time-dependent SSC instabilities and the resulting thermo-mechanical rejuvenation of an oceanic plate moving atop of a plume. Our simulations show a complex behavior, with acceleration, no change, or delay of the SSC onset, due to competing effects of the latent heat of partial melting, which cools the plume material, and of the buoyancy increase associated with both melt retention and depletion of residue following melt extraction. The melt-induced viscosity reduction is too localized to affect significantly SSC dynamics. Faster SSC triggering is promoted for low melting degrees (low plume temperature anomalies, thick lithosphere, or fast moving plates), which limit both the temperature reduction due to latent heat of melting and the accumulation of depleted buoyant residue in the upper part of the unstable layer. In contrast, high partial melting degrees lead to a strong temperate decrease due to latent heat of melting and development of a thick depleted layer within the sublithospheric convecting layer, which delay the development of gravitational instabilities. Despite differences in SSC dynamics, the thinning of the lithosphere is not significantly enhanced relatively to simulations that neglect partial melting.
ISSN: 1525-2027

hal-01277175
https://hal.archives-ouvertes.fr/hal-01277175
DOI : 10.1002/2015GC005967

Éditeur(s) : Pêche thonière et dispositifs de concentration de poissons, Caribbean-Martinique, 15-19 Oct 1999
Résumé : Tuna world fisheries yield 3 million tons per year; the increase rate of whole production is constant and sustained since 30 years. This original figure for marine fisheries is due to enlargement of tuna fleets and fishing grounds over all the world ocean, the continuous increase of tuna fishing power by in board equipment and remote sensing equipment for searching and scouting (on board, aircraft, satellite, telecommunication_). During the last 20 years, the log-associated tuna fishing has contributed to the local individual and tuna fleets efficiency and fishing power either for large industrial tuna seiners by radio-equipped buoys on natural (debris) or artificial man-made logs. The same trend is noted for numerous artisanal tuna and large pelagic coastal fisheries on moored fishing aggregating devices and networks. The first part of the paper is a review of data and results to assess and rank the "Surfaces prospected by in board tuna seiners and associated aircraft and satellite technics" (visual, radar, sar-radar and satellite altimetry sensors). The final objective is the comparison with the surfaces and volumes associated to fads. Since 20 years, tuna ecology and behaviour data from ultrasonic tagging (short-term depth/distance/time migration around logs and fads) are used for fishing of tuna associated with floating objects, namely fads. The second part of this paper is an "Assessment of fad's aggregating associated surface and volume" linked with oceanographic data: large oceanic geostrophic current and observed drift speed of radio-equipped fads in the Indian Ocean. Using the available data on fads, tuna fishing technology linked with oceanographic and biological data results from ultrasonic tuna tracking experiments, the paper is an attempt to identify and place the fads technology in the scale of tuna fishing devices as a contribution to the increase of tuna fishing power either individual tuna boat or tuna fleets.Original Abstract: La production mondiale des pecheries thonieres est actuellement de l'ordre de 3 millions de tonnes par an et conserve depuis pres de 50 ans un taux de croissance annuel soutenu. Cette croissance, exceptionnelle pour un secteur des peches maritimes, est due a plusieurs causes: accroissement des effectifs et des puissances de peche des grandes flottes thonieres industrielles oceaniques qui exploitent les ressources thonieres de l'ocean mondial et le developpement conjoint de nouvelles techniques de peche et de nouvelles technologies d'aide a la peche, telles que les dispositifs de concentration de poissons (DCP). L'accroissement de la puissance individuelle des navires est du au developpement de la construction navale (mecanisation, propulsion, hydraulique, conservation et traitement a borda) et a l'utilisation d'une gamme diversifiee d'aides a la peche : navigation, telecommunication, localisation des zones favorables, detection visuelle ou radiometrique assistee par equipement a bord, en helicoptere et avion, detection acoustique, detection par radar de bord, radar-avion ou, a terme, antenne SAR sur satellite. Plus recemment, soit depuis 20 ans, les caracteristiques du comportement, migration de court terme, agregation et concentration des poissons pelagiques, fixation et retention des bancs de thons, sont utilisees, par les dispositifs de concentration de poissons (DCP) ancres ou derivants. Cette contribution a pour objectif de situer et placer les DCP fixes ou derivants sur cet ensemble de techniques d'aide a la peche thoniere. Les donnees pour cet essai de classement sont d'ordres biologique, ethologique et comportementaux (amplitude de deplacement des thons et dimension de la sphere d'attraction d'un DCP) et d'ordres environnemental et oceanographique : masse d'eau concernee par un DCP dans une large veine de courant oceanique ou cotier. On tente de quantifier et d'ordonner les surfaces et les volumes prospectes par les thoniers et particulierement les volumes et masses d'eau exploites par les thoniers utilisant des DCP. Ce classement des DCP dans la serie des dispositifs d'aide a la peche thoniere facilitera l'appreciation de leur contribution a l'augmentation des puissances de peche des thoniers.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00042/15297/12656.pdf
http://archimer.ifremer.fr/doc/00042/15297/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Laboratory models have been conducted to improve our understanding of the role that the resistance of the slab to bending and its coupling to the ambient mantle play in subduction dynamics over geological time scales. Our models are set up with a viscous plate of silicone (lithosphere) subducting under negative buoyancy in a viscous layer of glucose syrup (mantle). For our study, the lithosphere/upper mantle viscosity contrast has been systematically varied, from similar to 10 to similar to 10(5) in order to explore the parameter space between weak and strong slab dynamics. We found that subduction is characterized by a retreating mode for viscosity ratios > 10(4), by the coexistence of a retreating mode and an advancing mode for viscosity ratios between similar to 10(4) and similar to 10(2), and quasi-stationary, Rayleigh-Taylor like behaviour for ratios < 10(2). By combining our experimental results and kinematic data from current subduction zones in four reference frames which differ in the amount of net rotation, we infer that a lithosphere/upper mantle viscosity contrast of 150-500 is necessary to obtain realistic trench/subducting plate velocity ratios as well as the variability of subduction styles observed in nature.
ISSN: 0012-821X

hal-00412008
https://hal.archives-ouvertes.fr/hal-00412008
DOI : 10.1016/j.epsl.2008.04.006

Éditeur(s) : Londres : Sampson Law, Marston, Searle & Rivington
Siècle(s) traité(s) : 19
Provenance : Archives départementales de Guadeloupe
Permalien : http://www.manioc.org/patrimon/ADG18114
ADG18114

Éditeur(s) : Pêche thonière et dispositifs de concentration de poissons, Caribbean-Martinique, 15-19 Oct 1999
Résumé : Installation and maintenance of FADs by the Government of Guam began in 1979, initially with funding from the Salstonstall-Kennedy Act through the Pacific Tuna Development Foundation. Current funding for the Guam FAD project is provided through the Dingell-Johnson/Wallop-Breaux Sport Fish Restoration programme, a Federal Aid Project funded by taxes collected on the purchase of fishing equipment and motorboat fuels nationwide. There are now sixteen operational FAD sites in Guam's waters. At a cost of approximately US$10,000 per system, concern for the rising costs of replacing and maintaining FAD systems has prompted the Department of Agriculture's Division of Aquatic and Wildlife Resources (DAWR) to investigate alternative FAD maintenance strategies and system design. Several cost-cutting measures being considered include the use of reliable solar-powered navigation lights to reduce the number of maintenance trips required, and switching to a newer generation of lighter, more durable buoys and mooring systems. Average time on station for a dawr fad system is nearing two years. Interestingly, in most cases where an errant system is recovered, the failure in the mooring system was observed to occur at a depth from 35 to 500 metres. These observations have led to speculation that additional protection of the mooring line down to 500 m may result in doubling the average time on station of most FAD systems.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00042/15324/12650.pdf
http://archimer.ifremer.fr/doc/00042/15324/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Large-scale conical and saucer-shaped sand injectites have been identified in the Upper Miocene sediments of the Lower Congo Basin. These structures are evidenced on the 3D high-resolution seismic data at about 600 ms TWT (two-way traveltime) beneath the seabed. The conical and saucer-shaped anomalies range from 20 to 80 m in height, 50 to 300 m in diameter, and 10 to 20 ms TWT in thickness. They are located within a sedimentary interval of about 100 m in thickness and are aligned over 20 km in dip direction (NE-SW), above the NW margin of an underlying Upper Miocene submarine fan. We have interpreted the conical and saucer-shaped anomalies as upward-emplaced sand injectites sourced from the Upper Miocene fan because of their discordant character, the postsedimentary uplifting of the sediments overlying the cones and saucer-shaped bodies, the alignment with the lateral fringe of the Upper Miocene submarine fan, and the geological context. Sand injection dates from the Miocene-Pliocene transition (approximately 5.3 Ma). The prerequisite overpressure to the sand injection process may be due to the buoyancy effect of hydrocarbons accumulated in the margins of the fan. Additionally, overpressure could have been enhanced by the lateral transfer of fluids operating in the inclined margins of the lobe. The short duration of sand injection and the presence of many sandstone intrusions suggested that the process of injection was triggered by an event, likely due to a nearby fault displacement related to diapiric movements. This is the first time that sand injectites of seismic scale have been described from the Lower Congo Basin. The localized nature of these injectites has led to a change in the migration path of fluids through the sedimentary cover. Consequently, the sand intrusions are both evidence and vectors of fluid migration within the basin fill.
ISSN: 1468-8115

hal-00963594
https://hal.archives-ouvertes.fr/hal-00963594
DOI : 10.1111/gfl.12057

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The way faults control upward fluid flow in nonmagmatic hydrothermal systems in extensional context is still unclear. In the Eastern Pyrénées, an alignment of twenty-nine hot springs (29 ∘ C to 73 ∘ C), along the normal Têt fault, offers the opportunity to study this process. Using an integrated multiscale geological approach including mapping, remote sensing, and macro-and microscopic analyses of fault zones, we show that emergence is always located in crystalline rocks at gneiss-metasediments contacts, mostly in the Têt fault footwall. The hot springs distribution is related to high topographic reliefs, which are associated with fault throw and segmentation. In more detail, emergence localizes either (1) in brittle fault damage zones at the intersection between the Têt fault and subsidiary faults or (2) in ductile faults where dissolution cavities are observed along foliations, allowing juxtaposition of metasediments. Using these observations and 2D simple numerical simulation, we propose a hydrogeological model of upward hydrothermal flow. Meteoric fluids, infiltrated at high elevation in the fault footwall relief, get warmer at depth because of the geothermal gradient. Topography-related hydraulic gradient and buoyancy forces cause hot fluid rise along permeability anisotropies associated with lithological juxtapositions, fracture, and fault zone compositions.
ISSN: 1468-8115

hal-01582968
https://hal-brgm.archives-ouvertes.fr/hal-01582968
https://hal-brgm.archives-ouvertes.fr/hal-01582968/document
https://hal-brgm.archives-ouvertes.fr/hal-01582968/file/Taillefer_et_al_Geofluids_2017.pdf
DOI : 10.1155/2017/8190109

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Middle Atlas is a region where xenolith-bearing volcanism roughly coincides with the maximum of lithospheric thinning beneath continental Morocco. It is therefore a key area to study the mechanisms of lithospheric thinning and constrain the component of mantle buoyancy that is required to explain the Moroccan topography. Samples from the two main xenolith localities, the Bou Ibalghatene and Tafraoute maars, have been investigated for their mineralogy, microstructures, crystallographic preferred orientation, and whole-rock and mineral compositions. While Bou Ibalghatene belongs to the main Middle Atlas volcanic field, in the ‘tabular’ Middle Atlas, Tafraoute is situated about 45 km away, on the North Middle Atlas Fault that separates the ‘folded’ Middle Atlas, to the South-East, from the ‘tabular’ Middle Atlas, to the North-West. Both xenolith suites record infiltration of sub-lithospheric melts that are akin to the Middle Atlas volcanism but were differentiated to variable degrees as a result of interactions with lithospheric mantle. However, while the Bou Ibalghatene mantle was densely traversed by high melt fractions, mostly focused in melt conduits, the Tafraoute suite records heterogeneous infiltration of smaller melt fractions that migrated diffusively, by intergranular porous flow. As a consequence the lithospheric mantle beneath Bou Ibalghaten was strongly modified by melt–rock interactions in the Cenozoic whereas the Tafraoute mantle preserves the record of extensional lithospheric thinning, most likely related to Mesozoic rifting. The two xenolith suites illustrate distinct mechanisms of lithospheric thinning: extensional thinning in Tafraoute, where hydrous incongruent melting triggered by decompression probably played a key role in favouring strain localisation, vs. thermal erosion in Bou Ibalghatene, favoured and guided by a dense network of melt conduits. Our results lend support to the suggestion that lithospheric thinning beneath the Atlas mountains results from the combination of different mechanisms and occurred in a piecewise fashion at a short wavelength scale.
ISSN: 0040-1951

hal-01171756
https://hal.archives-ouvertes.fr/hal-01171756
DOI : 10.1016/j.tecto.2014.11.020

Éditeur(s) : Amer Meteorological Soc
Résumé : The Congo River has the second largest rate of flow in the world and is mainly responsible for the broad tongue of low-salinity water that is observed in the Gulf of Guinea. Despite their importance, near-equatorial river plumes have not been studied as thoroughly as midlatitude plumes and their dynamics remain unclear. Using both theory and idealized numerical experiments that reproduce the major characteristics of the region, the authors have investigated the dynamics of the Congo River plume and examine its sensitivity to different forcing mechanisms. It is found that near-equatorial plumes are more likely to be surface trapped than midlatitude plumes, and the importance of the effect in describing the strong offshore extent of the low-salinity tongue during most of the year is demonstrated. It is shown that the buoyant plume constrained by the geomorphology is subject to the pulling of nonlinear structures and wavelike equatorial dynamics. The wind is found to strengthen the intrinsic buoyancy-driven dynamics and impede the development of the coastal southward current, in coherence with observations.
Journal Of Physical Oceanography (0022-3670) (Amer Meteorological Soc), 2014-03 , Vol. 44 , N. 3 , P. 980-994

Droits : 2014 American Meteorological Society
http://archimer.ifremer.fr/doc/00187/29850/28298.pdf
DOI:10.1175/JPO-D-13-0132.1
http://archimer.ifremer.fr/doc/00187/29850/

Éditeur(s) : New York : Francis P. Harper London : Gibbings
Siècle(s) traité(s) : 17
Droits : Domaine public
Provenance : Communauté d'agglomération de La Rochelle. Médiathèque Michel-Crépeau
Permalien : http://www.manioc.org/patrimon/MMC16037
MMC16037

Éditeur(s) : HAL CCSD
Résumé : International audience
As subducting plates reach the base of the upper mantle, some appear to flatten and stagnate, while others seemingly go through unimpeded. This variable resistance to slab sinking has been proposed to affect long-term thermal and chemical mantle circulation. A review of observational constraints and dynamic models highlights that neither the increase in viscosity between upper and lower mantle (likely by a factor 20–50) nor the coincident endothermic phase transition in the main mantle silicates (with a likely Clapeyron slope of –1 to –2 MPa/K) suffice to stagnate slabs. However, together the two provide enough resistance to temporarily stagnate subducting plates, if they subduct accompanied by significant trench retreat. Older, stronger plates are more capable of inducing trench retreat, explaining why backarc spreading and flat slabs tend to be associated with old-plate subduction. Slab viscosities that are ∼2 orders of magnitude higher than background mantle (effective yield stresses of 100–300 MPa) lead to similar styles of deformation as those revealed by seismic tomography and slab earthquakes. None of the current transition-zone slabs seem to have stagnated there more than 60 m.y. Since modeled slab destabilization takes more than 100 m.y., lower-mantle entry is apparently usually triggered (e.g., by changes in plate buoyancy). Many of the complex morphologies of lower-mantle slabs can be the result of sinking and subsequent deformation of originally stagnated slabs, which can retain flat morphologies in the top of the lower mantle, fold as they sink deeper, and eventually form bulky shapes in the deep mantle.
ISSN: 1553-040X

hal-01571965
https://hal.archives-ouvertes.fr/hal-01571965
DOI : 10.1130/GES01476.1

Éditeur(s) : London : Saunders and Otley
Description : History of the Caribs. Culture and way of life of Antiguans in the 18th and 19th Centuries.
Siècle(s) traité(s) : 18
Droits : Domaine public
Provenance : Ville de Pointe-à-Pitre. Réseau des bibliothèques
Permalien : http://www.manioc.org/patrimon/PAP11081
PAP11081

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Cratons represent the oldest preserved lithospheric domains. Their lithosphere (lithospheric mantle welded to overlying Precambrian crystalline basement) is considered to be particularly robust and long-lived due to the protecting presence of buoyant and rigid “keels” made up of residual harzburgites. Although the cratons are mostly assumed to form in the Archaean, the timing of their formation remains poorly constrained. In particular, there are very few datasets describing concurrently the age of both the crustal and mantle portions of the lithosphere. In this study, we report new U–Pb ages and Hf isotope compositions for zircons in crustal xenoliths from the Udachnaya kimberlite in the central Siberian craton; this dataset includes samples from both the upper and lower portions of the crust. The zircon ages agree well with model melt-extraction Re–Os ages on refractory peridotite xenoliths from the same pipe; taken together they allow an integrated view of lithosphere formation. Our data reveal that the present day upper crust is Archaean, whereas both the lower crust and the lithospheric mantle yield Paleoproterozoic ages. We infer that the deep lithosphere beneath the Siberian craton was not formed in a single Archaean event, but grew in at least two distinct events, one in the late Archaean and the other in the Paleoproterozoic. Importantly, a complete or large-scale delamination and rejuvenation of the Archaean lower lithosphere (lower crust and lithospheric mantle) took place in the Paleoproterozoic. This further demonstrates that craton formation can be a protracted, multi-stage process, and that the present day crust and mantle may not represent complementary reservoirs formed through the same tectono-magmatic event. Further, deep cratonic lithosphere may be less robust and long living than often assumed, with rejuvenation and replacement events throughout its history.
ISSN: 0012-821X

hal-01467648
https://hal.archives-ouvertes.fr/hal-01467648
DOI : 10.1016/j.epsl.2016.09.046

Éditeur(s) : Pêche thonière et dispositifs de concentration de poissons, Caribbean-Martinique, 15-19 Oct 1999
Résumé : Yellowfin tuna (Thunnus albacares) is a main target for the fisheries at Fish Aggregating Devices (FADs) off the south of Okinawa island. Catch and weight composition of the tuna were monitored at a fisheries cooperative market from 1989 to 1998. Some distinct weight groups (considered to represent cohorts) appeared in the catch and the weight of these groups increased monthly - presumably as individual tuna grew. Although small, light weight fish were caught year-round, the 2 kg weight group that was recruited in May grew to about 15 kg by May of the next year. There was a significant seasonal cycle in the monthly catches. The catch of heavier weight groups decreased in winter indicating the tuna moved out of this FAD area. At one of huge FADs (Nirai), fifteen nautical miles southeast of Okinawa island (depth about 1.300 m), a current meter (Aanderaa RCM-7) recorded current and water temperature from June 1995 to March 1996. The current meter was attached to the FAD at 4 m depth. When typhoons attacked Okinawa, the water temperature drastically dropped. Typically, average current speed was 29 cm/s and eastward current was most frequent. Being affected by tide, the current was averaged over twenty-five hours. Current speed was correlated with the yellowfin catch in 120 daily sets at the FAD; the weaker the current speed, the greater the catch. Although not significant, the catch was greater with northeastward current than with southwestward current.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00042/15300/12662.pdf
http://archimer.ifremer.fr/doc/00042/15300/

Éditeur(s) : HAL CCSD Elsevier
Résumé : The dense hydrous magnesium silicate called the D phase is the most likely candidate to recycle hydrogen into the lower mantle in subduction zones. As seismology represents the preferred method to detect this mineral in subduction zones, the single crystal elastic tensor has been calculated using first principle methods. A triple cell (View the MathML source) was used to account for an ordered ideal composition of the D phase to lower mantle pressures. The elastic tensor of the mineral at ambient conditions is predicted to be C11 = 387.7, C33 = 287.7, C44 = 100.4, C12 = 108.0, C13 = 51.1, C14 = − 14.6 in GPa with bulk modulus at zero pressure Ko = 163 GPa and a statistical error of about 4.0 GPa for all constants. The pressure derivatives of the elastic constants have been determined to pressure of 80 GPa. Our tensor correctly predicts the published experimental measurements of linear compressibility along the a- and c-axes, the logarithmic pressure derivative of the c/a axial ratio and bulk modulus at zero pressure. It contradicts the experimentally measured elastic tensor reported by (Liu, L.-G., Okamoto, K., Yang, Y.-J., Chen, C.-C., Lin, C.-C., 2004. Elasticity of single-crystal phase D (a dense hydrous magnesium silicate) by Brillouin spectroscopy. Solid State Commun. 132, 517–520), which fails to reproduce the experimental compressibility data. Using the elastic constants and density predicted to 85 GPa, the seismic anisotropy of P- and S-waves has been calculated as a function of pressure. The single crystal has high P-wave velocities and shear wave splitting in the basal plane below 20 GPa. At high pressures, the maximum P-wave velocities have threefold symmetry normal to a-axes in the basal plane, whereas the maximum shear wave splitting is parallel to a-axes with twofold symmetry. The D phase has high Vp and Vs anisotropy at ambient pressure, 17.6% for Vp and 19.9% for Vs. The Vp anisotropy decreases with increasing pressure to about 30 GPa, while it remains constant at 8% from 30 to 85 GPa. The Vs anisotropy decreases to 17% at 20 GPa and then increases to 22% at 85 GPa. The isotropic velocity ratios of S to P (Rs/p), bulk sound to S (Rphi/s) and density to S (Rρ/s) are calculated as a function of pressure. The Rs/p shows very little variation with pressure with low value of 0.6, whereas both Rphi/s and Rρ/s increase with pressure to peak values of 2.8 and 2.0 respectively at about 60 GPa. The presence of the D phase in subducted horizontal ‘stagnant' plates in the circum Pacific could contribute to a number of seismic observations, such as the observed velocity heterogeneity at depths between 500 and 1000 km and the fast S-waves travelling horizontally with horizontal polarization in this depth range. Further the lower density of the D phase compared with anhydrous minerals could influence buoyancy of the hydrated ‘stagnant' slabs. The transformation of the D phase to perovskite plus ferripericlase during thermal annealing may be responsible for horizontal slab seismogenesis.
ISSN: 0012-821X

hal-00406379
https://hal.archives-ouvertes.fr/hal-00406379
DOI : 10.1016/j.epsl.2007.04.053

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The upward oil migration in a transparent and rough fracture containing a liquid of higher density is studied experimentally using a light transmission technique. The aperture heterogeneity is also measured by light transmission. The injection of oil in a fracture containing a heavier fluid produces a gravitational fingering instability. Depending on the injection velocity (capillary number, Ca) and the density difference between the two fluids (Bond number, Bo), different patterns are observed during the oil displacements. The width of the finger and its velocity are measured as a function of Bo and Ca. A stability analysis of the interface, based on a generalised Darcy equation in a two-dimensional fracture, allows an accurate description of the experimental results. The order of magnitude of the finger width and its velocity are in good agreement with the calculations, with small disparities due to various unknown fluid flow parameters: capillary pressure, finger thickness in the gap of the fracture, finger tortuosity and oil velocity field into the finger. The theoretical approach allows constructing a (Ca, Bo) phase diagram of stability of the interface.
ISSN: 0169-3913

hal-00429329
https://hal.archives-ouvertes.fr/hal-00429329
DOI : 10.1007/s11242-009-9340-2

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims at better deciphering the different mechanisms involved in the functioning of the subduction interplate. A 2D thermo-mechanical model is used to simulate a subduction channel, made of oceanic crust, free to evolve. Convergence at constant rate is imposed under a 100 km thick upper plate. Pseudo-brittle and non-Newtonian behaviours are modelled. The influence of the subduction channel strength, parameterized by the difference in activation energy between crust and mantle () is investigated to examine in detail the variations in depth of the subduction plane down-dip extent, . First, simulations show that numerical resolution may be responsible for an artificial and significant shallowing of if the weak crustal layer is not correctly resolved. Second, if the age of the subducting plate is 100 Myr, subduction occurs for any . The stiffer the crust is, that is, the lower is, the shallower is (60 km depth if kJ/mol) and the hotter the fore-arc base is. Conversely, imposing a very weak subduction channel ( J/mol) leads there to an extreme mantle wedge cooling and inhibits mantle melting in wet conditions. Partial kinematic coupling at the fore-arc base occurs if kJ/mol. If the incoming plate is 20 Myr old, subduction can occur under the conditions that the crust is either stiff and denser than the mantle, or weak and buoyant. In the latter condition, cold crust plumes rise from the subduction channel and ascend through the upper lithosphere, triggering (1) partial kinematic coupling under the fore-arc, (2) fore-arc lithosphere cooling, and (3) partial or complete hindrance of wet mantle melting. then ranges from 50 to more than 250 km depth and is time-dependent if crust plumes form. Finally, subduction plane dynamics is intimately linked to the regime of subduction-induced corner flow. Two different intervals of are underlined: 80–120 kJ/mol to reproduce the range of slab surface temperature inferred from geothermometry, and 10–40 kJ/mol to reproduce the shallow hot mantle wedge core inferred from conditions of last equilibration of near-primary arc magmas and seismic tomographies. Therefore, an extra process controlling mantle wedge dynamics is needed to satisfy simultaneously the aforementioned observations. A mantle viscosity reduction, by a factor 4–20, caused by metasomatism in the mantle wedge is proposed. From these results, I conclude that the subduction channel down-dip extent, , should depend on the subduction setting, to be consistent with the observed variability of sub-arc depths of the subducting plate surface.
ISSN: 0031-9201

hal-01623155
https://hal.archives-ouvertes.fr/hal-01623155
DOI : 10.1016/j.pepi.2017.05.008