Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Cretaceous paleogeography and the kinematic evolution of the Iberian plate are poorly constrained. Especially problematic is to reconcile Iberian paleomagnetic data with paleomagnetic data of the neighboring plates and with Euler poles derived from seafloor magnetic anomalies. The first limitation arises from the Cretaceous Normal Polarity Superchron where paleogeographic reconstruction using marine magnetic anomalies is handicapped. The second arises from the paucity of reliable paleomagnetic poles with satisfactory statistical criteria and age. In order to address these shortcomings and provide new high quality paleomagnetic poles for Iberia, we conducted a detailed rock magnetic and paleomagnetic study of two Cretaceous magmatic sills, the Paço de Ilhas (PI) and Foz da Fonte (FF) sills, from the Lusitanian Basin, Portugal, recently dated at about 88 and 94 Ma, respectively. Our results show that the magnetic mineralogy of the sills is primary, i.e., acquired during magma cooling, and essentially represented by titanomagnetite. The corresponding paleomagnetic poles match the synthetic APWP from the African plate at 80 and 100 Ma. On the basis of a rigorous selection of Iberian Cretaceous poles, we then calculated mean paleomagnetic poles for different time intervals and found that Iberian paleomagnetic data fit well the global APWP between 70 and 120 Ma, but move far away from the APWP at pre-rift times. Our approach shows that new and better constrained paleomagnetic poles can aide in solving part of the contradiction between Iberian and African APWPs.
ISSN: 0148-0227

hal-00758103
https://hal.archives-ouvertes.fr/hal-00758103
DOI : 10.1029/2011JB009067

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : A differential effective medium (DEM) model is used to predict elastic properties for a set of porous and anisotropic aggregates, comprised of mixtures of calcite and muscovite. The DEM takes into consideration an anisotropic background medium with triclinic or higher symmetry, in which inclusions of idealized ellipsoidal shape are added incrementally. In general, the calculated elastic properties of a solid that contains inclusions representing "dry" pores/cracks are strongly dependent on the orientation and aspect ratio of the inclusions. Aspect ratios of inclusions in the synthetic aggregates, which consist of air-filled pores, are estimated from anisotropy of magnetic susceptibility (AMS) of samples whose pore space has been impregnated with a colloidal ferrofluid. The AMS derived pore shape geometry is used as an input value for inclusions in the DEM. Modeling results are compared with laboratory determined elastic properties, measured with ultrasonic waves. Calculated shear wave velocities agree in general well with laboratory measured S wave velocities, whereas calculated P wave velocities are typically 0.5-1.1 km/s higher than measured values. Differences between calculated and measured P wave velocities are attributed mainly to incomplete and biased ferrofluid saturation of pores. Spherical pores are preferably filled during imbibition, in comparison to thin cracks, which leads to overprediction of the calculated P wave velocities. The amount of ferrofluid that fills the pore space is dependent on the ratio of calcite to muscovite and the load used for compaction during sample synthesis. The permeability decreases with increasing muscovite content and increasing compaction load. Incomplete saturation of samples with high-muscovite content is confirmed by X-ray microtomography density contrast imaging of dry and ferrofluid saturated specimens.
ISSN: 0148-0227

hal-00617717
https://hal.archives-ouvertes.fr/hal-00617717
DOI : 10.1029/2010JB007750

Éditeur(s) : HAL CCSD Hindawi Publishing Corporation
Résumé : During the 1982-1984 bradyseismic crises in the Campi Flegrei area (Italy), the University of Wisconsin deployed a network of seismological stations to record local earthquakes. In order to analyse the potential of the recorded data in terms of tomographic imaging, a blind test was recently set up and carried out in the framework of a research project. A model representing a hypothetical 3D structure of the area containing the Campi Flegrei caldera was also set up, and a synthetic dataset of time arrivals was in turn computed. The synthetic dataset consists of several thousand P- and S-time arrivals, computed at about fourteen stations. The tomographic inversion was performed by four independent teams using different methods. The teams had no knowledge of either the input velocity model or the earthquake hypocenters used to create the synthetic dataset. The results obtained by the different groups were compared and analysed in light of the true model. This work provides a thorough analysis of the earthquake tomography potential of the dataset recording the seismic activity at Campi Flegrei in the 1982-1984 period. It shows that all the tested earthquake tomography methods provide reliable low-resolution images of the background velocity field of the Campi Flegrei area, but with some differences. However, none of them succeeds in detecting the hypothetical structure details (i.e. with a size smaller than about 1.5-2 km), such as a magmatic chamber 4 km deep and especially the smaller, isolated bodies, which represent possible magmatic chimneys and intrusions.
ISSN: 1687-885X

hal-00795584
https://hal.archives-ouvertes.fr/hal-00795584
DOI : 10.1155/2012/505286

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A set of synthetic aggregates, containing mixtures of calcite and muscovite, were compacted with varying uniaxial loads ranging from 20 MPa up to 400 MPa. Their elastic properties have been measured using compressional and shear waves in confining hydrostatic pressures up to 475 MPa. Measured seismic velocities are shown to depend on 1) the ratio of calcite to muscovite, 2) the uniaxial load used during sample manufacturing, and 3) the porosity amount prior to velocity measurements. The matrix framework may also affect the seismic velocities, but this effect is not easily quantifiable. In general, measured seismic velocities decrease with increasing muscovite content and porosity. Elastic properties have been calculated based on texture measurements, which were obtained by neutron diffraction. The calculated velocities are based on the calcite and muscovite single crystal elastic tensors, their orientation distribution functions, and their modal fractions. A large discrepancy is apparent between calculated and measured velocities, where the former always overestimate the actual velocities. Shear waves display less of a difference between calculated and measured values, than do compressional waves, indicating that waves propagating by shearing are less affected by sample porosity and matrix framework. A better agreement between measured and calculated seismic velocities arises when the initial porosity is taken into account, using a differential effective medium model. Seismic anisotropy is evident from both measured and calculated velocities, and is low for samples containing pure calcite, but becomes prominent as the muscovite concentration increases. The intensity of anisotropy further depends on the uniaxial load used during sample compaction and the initial porosity.
ISSN: 0148-0227

hal-00512666
https://hal.archives-ouvertes.fr/hal-00512666
DOI : 10.1029/2009JB006523

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Rifting in a cratonic lithosphere is strongly controlled by several interacting processes including crust/mantle rheology, magmatism, inherited structure and stress regime. In order to better understand how these physical parameters interact, a 2 yr long seismological experiment has been carried out in the North Tanzanian Divergence (NTD), at the southern tip of the eastern magmatic branch of the East African rift, where the southward-propagating continental rift is at its earliest stage. We analyse teleseismic data from 38 broad-band stations ca. 25 km spaced and present here results from their receiver function (RF) analysis. The crustal thickness and Vp/Vs ratio are retrieved over a ca. 200 × 200 km2 area encompassing the South Kenya magmatic rift, the NTD and the Ngorongoro-Kilimanjaro transverse volcanic chain. Cratonic nature of the lithosphere is clearly evinced through thick (up to ca. 40 km) homogeneous crust beneath the rift shoulders. Where rifting is present, Moho rises up to 27 km depth and the crust is strongly layered with clear velocity contrasts in the RF signal. The Vp/Vs ratio reaches its highest values (ca. 1.9) beneath volcanic edifices location and thinner crust, advocating for melting within the crust. We also clearly identify two major low-velocity zones (LVZs) within the NTD, one in the lower crust and the second in the upper part of the mantle. The first one starts at 15–18 km depth and correlates well with recent tomographic models. This LVZ does not always coexist with high Vp/Vs ratio, pleading for a supplementary source of velocity decrease, such as temperature or composition. At a greater depth of ca. 60 km, a mid-lithospheric discontinuity roughly mimics the step-like and symmetrically outward-dipping geometry of the Moho but with a more slanting direction (NE–SW) compared to the NS rift. By comparison with synthetic RF, we estimate the associated velocity reduction to be 8–9 per cent. We relate this interface to melt ponding, possibly favouring here deformation process such as grain-boundary sliding (EAGBS) due to lithospheric strain. Its geometry might have been controlled by inherited lithospheric fabrics and heterogeneous upper mantle structure. We evidence that crustal and mantle magmatic processes represent first order mechanisms to ease and locate the deformation during the first stage of a cratonic lithospheric breakup.
ISSN: 0956-540X

hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078/document
https://hal.archives-ouvertes.fr/hal-01622078/file/plasmanGJI2017.pdf
DOI : 10.1093/gji/ggx177

Éditeur(s) : Ieee-inst Electrical Electronics Engineers Inc
Résumé : The synthetic aperture radar (SAR) Doppler centroid has been used to estimate the scatter line-of-sight radar velocity. In weak to moderate ocean surface current environment, the SAR Doppler centroid is dominated by the directionality and strength of wave-induced ocean surface displacements. In this paper, we show how this sea state signature can be used to improve surface wind retrieval from SAR. Doppler shifts of C-band radar return signals from the ocean are thoroughly investigated by colocating wind measurements from the ASCAT scatterometer with Doppler centroid anomalies retrieved from Envisat ASAR. An empirical geophysical model function (CDOP) is derived, predicting Doppler shifts at both VV and HH polarization as function of wind speed, radar incidence angle, and wind direction with respect to radar look direction. This function is used into a Bayesian inversion scheme in combination with wind from a priori forecast model and the normalized radar cross section (NRCS). The benefit of Doppler for SAR wind retrieval is shown in complex meteorological situations such as atmospheric fronts or low pressure systems. Using in situ information, validation reveals that this method helps to improve the wind direction retrieval. Uncertainty of the calibration of Doppler shift from Envisat ASAR hampers the inversion scheme in cases where NRCS and model wind are accurate and in close agreement. The method is however very promising with respect of future SAR missions, in particular Sentinel-1, where the Doppler centroid anomaly will be more robustly retrieved.
Ieee Transactions On Geoscience And Remote Sensing (0196-2892) (Ieee-inst Electrical Electronics Engineers Inc), 2012-07 , Vol. 50 , N. 7 , P. 2901-2909

Droits : 2012 IEEE
http://archimer.ifremer.fr/doc/00088/19896/17554.pdf
DOI:10.1109/TGRS.2011.2174998
http://archimer.ifremer.fr/doc/00088/19896/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We performed forward modelling of seismic anisotropy beneath a migrating strike-slip plate boundary to: (1) test if such a geodynamic context might explain teleseismic shear wave splitting data in the vicinity of the central part of the San Andreas Fault and (2) constrain the power of such data to unravel vertical and lateral variations in deformation patterns in the upper mantle. The modelling involves five steps: (1) thermomechanical modelling, using a finite-element code, of the deformation field, (2) viscoplastic self-consistent modelling of the resulting olivine and pyroxene crystal preferred orientations, (3) calculation of the elasticity tensors for different domains of the finite elements (FEs) model, (4) forward modelling of seismic wave propagation through the model using ray theory, finite-frequency theory and a full-wave approach and (5) performing splitting measurements on the synthetic seismograms. SKS splitting data in central California are best fitted by a model with a hotter geotherm within 60 km of the plate boundary accounting for the opening of an asthenospheric window due to the northward migration of the Mendocino Triple Junction. The westward motion of the plate boundary cannot however explain the rotation of fast polarization directions east of the San Andreas Fault in central California. Comparison between modelled and measured individual shear wave splitting also implies that the homogeneity of the two-layer models accounting for the observations in the vicinity of the San Andreas Fault indicates a sharp transition between lithospheric and asthenospheric deformations beneath this plate boundary. The ability of different synthetic approaches to localize horizontally and vertically the plate boundary-related deformation differs significantly. Splitting in ray theory synthetics closely follow variations in olivine crystallographic preferred orientations in the model. In contrast, splitting analysis on full-wave synthetics, which should be more representative of actual long-period SKS waves, results in smooth apparent lateral variations of anisotropy; the exact location and width of the plate boundary may only be retrieved by comparing fast-polarization profiles obtained using a multichannel analysis on waves with different periods.
ISSN: 0956-540X

hal-01236150
http://hal.univ-reunion.fr/hal-01236150
http://hal.univ-reunion.fr/hal-01236150/document
http://hal.univ-reunion.fr/hal-01236150/file/Bonnin_San_Andreas_modelling_GJI2012.pdf
DOI : 10.1111/j.1365-246X.2012.05650.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Diffusion parameters for HTO, 36Cl−, and 125I− were determined on Upper Toarcian argillite samples from the Tournemire Underground Research Laboratory (Aveyron, France) using the through diffusion technique. The direction of diffusion was parallel to the bedding plane. The purpose of the present study was 3-fold; it was intended (i) to confirm the I− interaction with Upper Toarcian argillite and to verify the effects of initial I− concentration on this affinity, as previously observed by means of radial diffusion experiments, (ii) to highlight any discrepancy between Cl− and I− diffusivity, and (iii) to investigate the effect of an increase of the ionic strength of the solution on the anionic tracers' diffusive behaviour. The results show that the effective diffusion coefficient (De) and diffusion accessible porosity (εa) values obtained with an ionic strength (I.S.) synthetic pore water of 0.01 eq L−1 are: De = 2.35-2.50 × 10−11 m2 s−1 and εa = 12.0-15.0% for HTO, and De = 14.5-15.5 × 10−13 m2 s−1 and εa = 2.5-2.9% for 36Cl−. Because of anionic exclusion effects, anions diffuse slower and exhibit smaller diffusion accessible porosities than HTO, taken as a water tracer. The associated effective diffusion coefficient (De) and rock capacity factor (α) obtained for 125I are: De = 7.00-8.60 × 10−13 m2 s−1 and α = 4.3-7.2%. Such values make it possible to calculate low 125I distribution ratios (0.0057 < RD < 0.0192 mL g−1) which confirm the trend indicating that the 125I rock capacity factor increases with the decrease of the initial I− concentration. Additional through-diffusion experiments were carried out with a higher ionic strength synthetic pore water (I.S. = 0.11 eq L−1). No evolution of HTO diffusion parameters was observed. The anionic tracers' effective diffusion coefficient increased by a factor of two but no clear evolution of their accessible porosity was observed. Such a paradox could be related to the particularly small mean pore size of the Upper Toarcian argillite of Tournemire. The most significant finding of this study is the large discrepancy (factor of two) between the values of the effective diffusion coefficient for 125I and 36Cl. Whatever the ionic strength of the synthetic solution used, 125I exhibited De values two times lower than those of 36Cl. A detailed explanation for this difference cannot be given at present even if a hypothesis based on ion-pairing or on steric-exclusion cannot be excluded. This makes questionable the assumption usually made for quantifying 125I sorption and postulating that 36Cl and 125I would diffuse in the same porosity. In other terms, at Tournemire, 125I sorption could be more pronounced than previously indicated.
ISSN: 0883-2927

hal-00757749
https://hal.archives-ouvertes.fr/hal-00757749
DOI : 10.1016/j.apgeochem.2011.12.017

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Gravity data and P-wave teleseismic traveltime residuals from 29 temporary broad-band stations spread over the northern margin of the Gulf of Aden (Dhofar region, Oman) were used to image lithospheric structure. We apply a linear relationship between density and velocity to provide consistent density and velocity models from mid-crust down to about 250 km depth. The accuracy of the resulting models is investigated through a series of synthetic tests. The analysis of our resulting models shows: (1) crustal heterogeneities that match the main geological features at the surface; (2) the gravity edge effect and disparity in anomaly depth locations for layers at 20 and 50 km; (3) two low-velocity anomalies along the continuation of Socotra-Hadbeen and Alula-Fartak fracture zones between 60 and 200 km depth; and (4) evidence for partial melting (3-6 per cent) within these two negative anomalies. We discuss the presence of partial melting in terms of interaction between the Sheba ridge melts and its along-axis segmentation.
ISSN: 0956-540X

hal-00456048
https://hal.archives-ouvertes.fr/hal-00456048
DOI : 10.1111/j.1365-246X.2009.04438.x

Éditeur(s) : HAL CCSD
Résumé : Guadeloupe Island (West French Indies) is one of the twenty islands that compose the Lesser Antilles Arc, which results from the subduction of the Atlantic Ocean plate beneath the Caribbean one. The island lies in a complex volcano-tectonic system and the need to understand its geological context has led to numerous on- and offshore geophysical investigations. This work presents the compilation and processing of available, on-land, airborne and marine, gravity and magnetic data acquired during the last 40 years on Guadeloupe Islands and at the scale of the Lesser Antilles Arc. The overall dataset provides new Bouguer and reduced to the pole magnetic anomaly maps at the highest achievable resolution. Regionally, the main central negative gravity trend of the arc allows defining two subsident areas. The first one is parallel to the arc direction (~N160°E) to the north, whereas the second unexpected southern one is oriented parallel to oceanic ridges (N130°E). Along the Outer Arc, the long wavelength positive anomaly is interpreted, at least along the Karukera Spur, as an up-rise of the volcanic basement in agreement with the seismic studies. To the NE of Guadeloupe, the detailed analysis of the geophysical anomalies outlines a series of structural discontinuities consistent with the main bathymetric morphologies, and in continuity of the main fault systems already reported in this area. Based on geophysical evidences, this large scale deformation and faulting of the Outer Arc presumably primarily affects the Atlantic subducting plate and secondarily deforms the upper Caribbean plate and the accretion prism. At the scale of Guadeloupe Island, joined gravity and magnetic modeling has been initiated based on existing interpretation of old seismic refraction profiles, with a general structure in three main layers. According to our geophysical anomalies, additional local structures are also modeled in agreement with geological observations: i) the gravity and magnetic signals confirm an up-rise of the volcanic basement below the limestone platforms outcropping on Grande-Terre Island ; ii) the ancient volcanic complexes of Basse-Terre Island are modeled with high density and reverse magnetized formations; iii) the recent volcanic centre is associated with formations consistent with the low measured density and the underlying hydrothermal system. The EW models coherently image a NNW-SSE depression structure in half-graben beneath Basse-Terre Island, its western scarp following the arc direction in agreement with bathymetric and seismic studies to the north of the island. The so-defined depressed area, and particularly its opening in half-graben toward the SW, is interpreted as the present-day front of deformation of the upper plate associated with the recent volcanic activity on and around Guadeloupe. Based on this regional deformation model, perspectives are given for further integrated investigation of key targets to address the internal structure and evolution of the Lesser Antilles Arc and Guadeloupe volcanic system.
Colloque 2012 du Comité National Français de Géodésie et Géophysique (CNFGG)
Clermont-Ferrand, France

hal-00742653
https://hal-brgm.archives-ouvertes.fr/hal-00742653
https://hal-brgm.archives-ouvertes.fr/hal-00742653/document
https://hal-brgm.archives-ouvertes.fr/hal-00742653/file/CNFGG_Caraibes.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. The question of their exhumation is nevertheless still unclear. The Aegean domain offers several HP-LT belts. Especially, the Attic-Cycladic Blueschist unit (ACBU) is an example of a HP-LT unit exhumed in a convergent and then in a divergent context. It actually appears in metamorphic core complexes (MCCs) formed in the back-arc of the subduction. The syn-convergence "message" is however difficult to read because of the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation remain unclear. We investigate theses questions with metamorphic petrology (Andros and Ios islands) and phengite population, single grain and in situ 40Ar-39Ar geochronology (Andros, Tinos, Syros and Ios islands). Based on these new constraints and a synthesis of published data, we are able to refine the geometry, the timing and the modes of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in the age and P-T conditions at the successive stages of syn-orogenic exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a basal thrust and a summital detachment. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. The change in boundary conditions is recorded by slowing of the exhumation and isobare heating. The conditions of post-orogenic exhumation differ from an island to another. The onset of post-orogenic exhumation is dated around 30 Ma in the northern Cyclades and 25 Ma in the southern Cyclades. It is related to top-to-the-North deformation in all the studied domain. The end of ductile deformation below the detachments is also diachronous (21 Ma in the North and 18 Ma in the South). Finally, we propose a model for the final steps of the exhumation related to the intrusion of granitic bodies around 14 Ma.
American Geophysical Union, Fall Meeting
San Francisco, United States

insu-00860510
https://hal-insu.archives-ouvertes.fr/insu-00860510
BIBCODE : 2010AGUFM.T23C2301L

Éditeur(s) : American Geophysical Union
Résumé : Noise with periods 3 to 10 s, ubiquitous in seismic records, is expected to be mostly generated by pairs of ocean wave trains of opposing propagation directions with half the seismic frequency. Here we present the first comprehensive numerical model of microseismic generation by random ocean waves, including ocean wave reflections. Synthetic and observed seismic spectra are well correlated (r > 0.85). On the basis of the model results, noise generation events can be clustered in three broad classes: wind waves with a broad directional spectrum (class I), sea states with a significant contribution of coastal reflections (class II), and the interaction of two independent wave systems (class III). At seismic stations close to western coasts, noise generated by class II sources generally dominates, but it is intermittently outshined by the intense class III sources, limiting the reliability of seismic data as a proxy for storm climates. The modeled seismic noise critically depends on the damping of seismic waves. At some mid-ocean island stations, low seismic damping is necessary to reproduce the observed high level and smoothness of noise time series that result from a spatial integration of sources over thousands of kilometers. In contrast, some coastal stations are only sensitive to noise within a few hundreds of kilometers. This revelation of noise source patterns worldwide provides a wealth of information for seismic studies, wave climate applications, and new constraints on the possible directional distribution of wave energy.
Journal of Geophysical Research ( JGR ) - Oceans (0148-0227) (American Geophysical Union), 2011-09 , Vol. 116 , N. C09004 , P. 21 p.

Droits : 2011 by the American Geophysical Union
http://archimer.ifremer.fr/doc/00044/15531/12926.pdf
DOI:10.1029/2011JC006952
http://archimer.ifremer.fr/doc/00044/15531/

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Polarized emittance measurements were acquired for synthetic forsterite, the pure magnesium end member of the olivines group, on the whole infrared spectral range and up to the melting point by using CO2 laser heating. The experimental data, fitted with a semi-quantum dielectric function model, allowed the retrieval of the temperature dependence of the absorption coefficient of forsterite both in the opaque and semi-transparent regions. The analysis of the phonon parameters indicates that the lattice dynamics evolve drastically with increasing temperature. The normal modes involving motions of the magnesium cations located in site 1 are the more impacted, and some of them vanish around 1,200 K. The results confirm that the enhancement of the lattice anharmonicity and the increasing mobility of the magnesium cations are closely linked and are at the origin of the anomalies observed in the evolution of the thermophysical properties. This complete set of spectroscopic data may be a step toward a more precise evaluation of the impact of thermal radiation heat transfer inside systems involving forsterite and quantification of their heat budget.
ISSN: 0342-1791

hal-00817079
https://hal.archives-ouvertes.fr/hal-00817079
DOI : 10.1007/s00269-013-0570-z

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
Guadeloupe island (West French Indies) is one of the twenty islands that compose the Lesser Antilles arc, which results from the subduction of the Atlantic ocean plate beneath the Caribbean one. The island lies in a complex volcano-tectonic system and the need to understand its geological context has led to numerous on- and offshore geophysical investigations. This work presents a compilation and the processing of available, on-land, airborne and marine, gravity and magnetic data acquired during the last 40 years on Guadeloupe islands and at the scale of the Lesser Antilles arc. The overall dataset provides new Bouguer and reduced to the pole magnetic anomaly maps at the highest achievable resolution. Regionally, the main central negative gravity trend of the arc allows defining two subsident areas. The first one is parallel to the arc direction (~N160°E) to the north, whereas the second unexpected southern one is oriented parallel to oceanic ridges (N130°E). Along the Outer arc, the long wavelength positive anomaly is interpreted, at least along the Karukera spur, as an up-rise of the volcanic basement in agreement with the seismic studies. To the NE of Guadeloupe, the detailed analysis of the geophysical anomalies outlines a series of structural discontinuities consistent with the main bathymetric morphologies, and in continuity of the main fault systems already reported in this area. Based on geophysical evidences, this large scale deformation and faulting of the Outer arc presumably primarily affects the Atlantic subducting plate and secondarily deforms the upper Caribbean plate and the accretion prism, as evidenced in bathymetry as well as on the islands. At the scale of Guadeloupe island, combined gravity and magnetic modeling has been initiated based on existing interpretation of old seismic refraction profiles, with a general structure in three main layers. According to our geophysical anomalies, additional local structures are also modeled in agreement with geological observations: i) the gravity and magnetic signals confirm an up-rise of the volcanic basement below the limestone platforms outcropping on Grande-Terre island ; ii) the ancient volcanic complexes of Basse-Terre island are modeled with high density and reverse magnetized formations; iii) the recent volcanic centre is associated with formations consistent with the low measured density and the underlying hydrothermal system. The E-W models coherently image a NNW-SSE depression structure in half-graben beneath Basse-Terre island, its western scarp following the arc direction in agreement with bathymetric and seismic studies to the north of the island. The so-defined depressed area, and particularly its opening in half-graben toward the SW, is interpreted as the present-day front of deformation of the upper plate, associated with the recent volcanic activity on and around Guadeloupe. Based on this regional deformation model, perspectives are given for further integrated investigation of key targets to address the internal structure and evolution of the Lesser Antilles arc and Guadeloupe volcanic system.
EISSN: 1777-5817

hal-00853352
https://hal.archives-ouvertes.fr/hal-00853352
DOI : 10.2113/gssgfbull.184.1-2.77

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To improve earthquake location, we create a 3-D a priori P-wave velocity model (3-DVM) that approximates the large velocity variations of the Ecuadorian subduction system. The 3-DVM is constructed from the integration of geophysical and geological data that depend on the structural geometry and velocity properties of the crust and the upper mantle. In addition, specific station selection is carried out to compensate for the high station density on the Andean Chain. 3-D synthetic experiments are then designed to evaluate the network capacity to recover the event position using only P arrivals and the MAXI technique. Three synthetic earthquake location experiments are proposed: (1) noise-free and (2) noisy arrivals used in the 3-DVM, and (3) noise-free arrivals used in a 1-DVM. Synthetic results indicate that, under the best conditions (exact arrival data set and 3-DVM), the spatiotemporal configuration of the Ecuadorian network can accurately locate 70 per cent of events in the frontal part of the subduction zone (average azimuthal gap is 289° ± 44°). Noisy P arrivals (up to ± 0.3 s) can accurately located 50 per cent of earthquakes. Processing earthquake location within a 1-DVM almost never allows accurate hypocentre position for offshore earthquakes (15 per cent), which highlights the role of using a 3-DVM in subduction zone. For the application to real data, the seismicity distribution from the 3-D-MAXI catalogue is also compared to the determinations obtained in a 1-D-layered VM. In addition to good-quality location uncertainties, the clustering and the depth distribution confirm the 3-D-MAXI catalogue reliability. The pattern of the seismicity distribution (a 13 yr record during the inter-seismic period of the seismic cycle) is compared to the pattern of rupture zone and asperity of the Mw = 7.9 1942 and the Mw = 7.7 1958 events (the Mw = 8.8 1906 asperity patch is not defined). We observe that the nucleation of 1942, 1958 and 1906 events coincides with areas of positive Simple Bouguer anomalies and areas where marine terraces are still preserved on the coastal morphology. From north to south: (1) the 1958 rupture zone is almost aseismic and is attributed to a zone of high coupling; (2) south of the Galera alignment (perpendicular to the trench), the 1942 rupture zone presents moderate seismicity, deeper on the seismogenic interplate zone, and abutting on the Jama cluster (to the south). This cluster is facing the Cabo Pasado cap and positive Bouguer anomalies on the overriding margin. We suspect that this cluster reflects a zone of local asperity (partial coupling). South of the Jama cluster, the spherical aseismic zone in the Bahia area is interpreted as having a low seismic coupling (steady creep motion or slow slip events). We suspect that the site that generated the three M > 7 events (1896, 1956 and 1998) correspond to a small patch of strong coupling. To the south, in the Manta-Puerto Lopez zone, the seismicity is mainly organized in earthquake swarms (1998, 2002, 2005). Although slow slip events have been observed in the area (Vallée et al. submitted), we infer from the coastline shape, the marine terraces and the high positive Bouguer anomalies that the seismicity here might reveal a significant amount of seismic coupling.
ISSN: 0956-540X

hal-00873478
https://hal.archives-ouvertes.fr/hal-00873478
DOI : 10.1093/gji/ggs083

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The nucleation, propagation, and associated folding of ramp-flat-ramp normal faults were analyzed from field examples developed in a brittle/ductile multilayer sequence of the Huércal-Overa Basin (SE Spain). Gently dipping sandy silt layers, which display a low cohesive strength (C0 = 7 kPa, μ = 34°), favor the development of extensional detachments. A tectonic origin instead of a possible gravitational origin is supported by the perpendicularity between the paleoslope direction of the fluvial-deltaic environment inferred from imbricated pebbles, and the senses of movement deduced from fault slicken-lines. The link between high-angle normal faults (HANFs) --formed at different levels in the layered sequence-- with horizontal fault segments comes to develop ramp-flat-ramp normal faults with associated roll-over in the hanging wall. Observed extensional duplexes are formed by parallel detachments connected through synthetic Riedel faults. These Riedel faults would produce the back-rotation of the individual blocks (horses), i.e., extensional folding of the originally subhorizontal layers. There is no correlation between the analyzed ramp-flat-ramp normal faults, accommodating south-southeastward extension during Serravallian-lower Tortonian, and either the regional Alpujarride/Nevado-Filabride west-directed extensional shear zone or the top-to-the-north detachments within Alpujarride units, which are clearly sealed by Serravallian-lower Tortonian sediments. Therefore, the studied normal faults are restricted to the brittle/ductile multilayer fluvio/deltaic sequence and accommodate moderate late extension instead of belonging to a large crustal extensional system connected with a regional detachment at depth. Therefore, the basin formed in a moderate crustal thickness context where small and medium-scale extensional systems were subordinate structures. These natural examples support the development of low-angle normal faults at very shallow crustal levels in multilayer sequences with suitable rheological conditions.
ISSN: 0278-7407

hal-00750352
https://hal.archives-ouvertes.fr/hal-00750352
DOI : 10.1029/2012TC003130

Éditeur(s) : IEEE
Résumé : Soil Moisture and Ocean Salinity, European Space Agency, is the first satellite mission addressing the challenge of measuring sea surface salinity from space. It uses an L-band microwave interferometric radiometer with aperture synthesis (MIRAS) that generates brightness temperature images, from which both geophysical variables are computed. The retrieval of salinity requires very demanding performances of the instrument in terms of calibration and stability. This paper highlights the importance of ocean salinity for the Earth's water cycle and climate; provides a detailed description of the MIRAS instrument, its principles of operation, calibration, and image-reconstruction techniques; and presents the algorithmic approach implemented for the retrieval of salinity from MIRAS observations, as well as the expected accuracy of the obtained results.
Proceedings of the IEEE (0018-9219) (IEEE), 2010-05 , Vol. 98 , N. 5 , P. 649-665

Droits : 2010 IEEE – All Rights Reserved
http://archimer.ifremer.fr/doc/00004/11482/8066.pdf
DOI:10.1109/JPROC.2009.2033096
http://archimer.ifremer.fr/doc/00004/11482/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Both oedometric and plane-strain tests were performed with parallelepipedic samples made of synthetic granular, cohesive, frictional and dilatant rock analogue material GRAM2. For the first time parallel sets of fractures that have all the characteristics of natural joints were reproduced in the laboratory. The fractures are regularly spaced, normal to σ3, and have plumose morphology very similar to that of natural joints. These fractures can form at tensile stress σ3 much smaller in magnitude than the tensile strength of material and even at slightly compressive σ3. When mean stress σ exceeds a certain value, the fractures become oblique to σ1 (the obliquity increases with σ), forming networks of conjugate shear bands/fractures. These results of plane-strain experiments are in good agreement with those of better controlled conventional axisymmetric tests on a similar material in Chemenda et al. (2011b) and are closer to real geological situations. Both types of experiments are complementary. Their results lead to the conclusion that at least certain categories of natural fractures (including joints, and conjugate shear fractures/bands) were initiated as deformation localization bands. The band orientation is defined by the constitutive properties/parameters (notably the dilatancy factor) that are sensitive to σ.
ISSN: 0040-1951

hal-00795555
https://hal.archives-ouvertes.fr/hal-00795555
DOI : 10.1016/j.tecto.2011.11.021

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : Shear-wave splitting measurements are widely used to analyze orientations of anisotropy. We compare two different shear-wave splitting techniques, which are generally assumed to give similar results. Using a synthetic test, which covers the whole backazimuthal range, we find characteristic differences, however, in fast-axis and delay-time estimates near Null directions between the rotation correlation and the minimum energy method. We show how this difference can be used to identify Null measurements and to determine the quality of the result. This technique is then applied to teleseismic events recorded at station LVZ in northern Scandinavia, for which our method constrains the fast-axis azimuth to be 15° and the delay time 1.1 sec.
ISSN: 0037-1106

hal-00404493
https://hal.archives-ouvertes.fr/hal-00404493
DOI : 10.1785/0120060190