Éditeur(s) : HAL CCSD National Institute of Environmental Health Sciences
Résumé : International audience
BACKGROUND: Women of reproductive age can be exposed to endocrine-disrupting chemicals (EDCs) at work, and exposure to EDCs in pregnancy may affect fetal growth. OBJECTIVES: We assessed whether maternal occupational exposure to EDCs during pregnancy as classified by application of a job exposure matrix was associated with birth weight, term low birth weight (LBW), length of gestation, and preterm delivery. METHODS: Using individual participant data from 133,957 mother-child pairs in 13 European cohorts spanning births from 1994 through 2011, we linked maternal job titles with exposure to 10 EDC groups as assessed through a job exposure matrix. For each group, we combined the two levels of exposure categories (possible and probable) and compared birth outcomes with the unexposed group (exposure unlikely). We performed meta-analyses of cohort-specific estimates. RESULTS: Eleven percent of pregnant women were classified as exposed to EDCs at work during pregnancy, based on job title. Classification of exposure to one or more EDC group was associated with an increased risk of term LBW [odds ratio (OR) = 1.25; 95% CI: 1.04, 1.49], as were most specific EDC groups; this association was consistent across cohorts. Further, the risk increased with increasing number of EDC groups (OR = 2.11; 95% CI: 1.10, 4.06 for exposure to four or more EDC groups). There were few associations (p < 0.05) with the other outcomes; women holding job titles classified as exposed to bisphenol A or brominated flame retardants were at higher risk for longer length of gestation. CONCLUSION: Results from our large population-based birth cohort design indicate that employment during pregnancy in occupations classified as possibly or probably exposed to EDCs was associated with an increased risk of term LBW.
ISSN: 0091-6765

hal-01405823
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01405823
DOI : 10.1289/EHP208
PUBMED : 27152464

Éditeur(s) : Elsevier Science Bv
Résumé : The advantages of FLOC over clear water (CW) in rearing juvenile L. vannamei and its effects on Vibrio communities were evaluated. Survival rate in FLOC and clear water were recorded and a probiotic was tested under both conditions. Daily growth rate (DGR) was higher in FLOC (p < 0.05) than in CW. Survival in each system increased significantly when a probiotic was included in the diet (p < 0.05). The Vibrionaceae community from the hepatopancreas (HP) and the culture medium did not differ between the two culture media. Nevertheless, a novel group of Vibrio strains was found to be unique to FLOC. No high level of lesions was observed in shrimp tissues from the FLOC + probiotic treatment; it suggests that the probiotic contributed to homeostasis and prevented outbreak of opportunistic pathogenic species.
Aquaculture (0044-8486) (Elsevier Science Bv), 2014-03 , Vol. 424 , P. 215-219

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00173/28379/26694.pdf
DOI:10.1016/j.aquaculture.2014.01.008
http://archimer.ifremer.fr/doc/00173/28379/

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Random walk (RW) or Continuous Time Random Walk (CTRW) are recurring Monte Carlo methods used to model convective and diffusive transport in complex heterogeneous media. Many applications can be found, including fluid mechanic, hydrology, and chemical reactors modeling. These methods are easy to implement, very versatile and flexible enough to become appealing for many applications because they generally overlook of deeply simplify the building of explicit complex meshes required by deterministic methods. RW and CTRW provide a good physical understanding of the interactions between the space scales of het-erogeneities and the transport phenomena under consideration. In addition, they can result in efficient up-scaling methods, especially in context of flow and transport in fractured media. In the present study, we review the applications of RW or CTRW for several situations coping with various spatial scales, and different insights into up-scaling applications. RW and CTRW advantages and downsides are also discussed, thus providing a few avenues for further works and applications.
ISSN: 0169-3913

hal-01449131
https://hal.archives-ouvertes.fr/hal-01449131
https://hal.archives-ouvertes.fr/hal-01449131/document
https://hal.archives-ouvertes.fr/hal-01449131/file/0025972-02.pdf
DOI : 10.1007/s11242-016-0693-z

Éditeur(s) : Blackwell science
Résumé : This paper provides an exploratory analysis aiming to seek whether the colour of environmental noise theory could help in understanding the intriguing reproductive strategy of Atlantic bluefin tuna (BFT). A frequency-based approach based on spectral exponents, f(beta) with beta < 0, is chosen and applied on 10 biogeographical provinces covering the North Atlantic. The major BFT spawning area, i.e. the Mediterranean Sea, was the only one to display a pink power spectrum, whereas open ocean regions displayed more reddened fluctuations, i.e. greater variance at low frequencies. Environmental noise in the Mediterranean could, thus, offer more favourable characteristics on the long-term than the open ocean. The implications of these findings are discussed in regards to medium and long (possibly evolutionary) time scales.
Fisheries Oceanography (1054-6006) (Blackwell science), 2007-03 , Vol. 16 , N. 2 , P. 202-206

Droits : 2007 Blackwell science
http://archimer.ifremer.fr/doc/2007/publication-2437.pdf
DOI:10.1111/j.1365-2419.2006.00424.x
http://archimer.ifremer.fr/doc/00000/2437/

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Random walk (RW) methods are recurring Monte Carlo methods used to modelconvective and diffusive transport in complex heterogeneous media. Many applications canbe found, including fluid mechanic, hydrology and chemical reactors modeling. These methodsare easy to implement, very versatile and flexible enough to become appealing for manyapplications because they generally overlook or deeply simplify the building of explicit complexmeshes required by deterministic methods. RWprovides a good physical understandingof the interactions between the space scales of heterogeneities and the transport phenomenaunder consideration. In addition, they can result in efficient upscaling methods, especiallyin the context of flow and transport in fractured media. In the present study, we review theapplications of RW to several situations that cope with diverse spatial scales and differentinsights into upscaling problems. The advantages and downsides of RW are also discussed,thus providing a few avenues for further works and applications.
ISSN: 0169-3913

insu-01308060
https://hal-insu.archives-ouvertes.fr/insu-01308060
DOI : 10.1007/s11242-016-0693-z

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Ce travail dresse un bilan sur la situation des MPME en Haïti et propose une analyse succincte de l’impact des instruments économiques, réglementaires et technologiques au développement économique et à la protection de l’environnement. Les discussions menées ont permis de découvrir que l’application de ces instruments est une perspective d’amélioration du développement économique des MPME.La structuration des MPME reste la principale action stratégique de croissance et représente une grande valeur ajoutée pour le développement économique du pays. Le panorama des MPME haïtiennes nous a permis de compléter les insuffisances du cadre légal réglementant le fonctionnement des MPME et de comprendre leur participation à la croissance économique du pays. Ce sont des outils indispensables pour réduire la pauvreté, faciliter le développement et renforcer les politiques de protection de l’environnement à travers le pays.
This study assesses the place of MSMEs in Haiti and gives a brief description of the relevant economic, regulatory and technological instruments of economic development and environmental protection. The discussions suggest that the application of such instruments will encourage and improve economic development in Haiti.The infrastructure necessary for MSEs drives growth and offers added value to economic development in Haiti. With an overview of Haitian MSEs we have been able to identify and palliate insufficiencies in the legislative framework regulating the operation of MSEs, as well as, understand their involvement in economic growth. MSEs are a powerful tool to reduce poverty, facilitate economic development and reinforce policies supporting environmental protection.
Haïti

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.10327
http://journals.openedition.org/etudescaribeennes/10327

Éditeur(s) : HAL CCSD InTech
Résumé : Available from: http://www.intechopen.com/books/evaporation-condensation-and-heat-transfer/heat-transfer-in-buildings-application-to-solar-air-collector-and-trombe-wall-design
International audience
The aim of this paper is to briefly recall heat transfer modes and explain their integration within a software dedicated to building simulation (CODYRUN). Detailed elements of the validation of this software are presented and two applications are finally discussed. One concerns the modeling of a flat plate air collector and the second focuses on the modeling of Trombe solar walls. In each case, detailed modeling of heat transfer allows precise understanding of thermal and energetic behavior of the studied structures. Recent decades have seen a proliferation of tools for building thermal simulation. These applications cover a wide spectrum from very simplified steady state models to dynamic simulation ones, including computational fluid dynamics modules (Clarke, 2001). These tools are widely available in design offices and engineering firms. They are often used for the design of HVAC systems and still subject to detailed research, particularly with respect to the integration of new fields (specific insulation materials, lighting, pollutants transport, etc.). Available from: http://www.intechopen.com/books/evaporation-condensation-and-heat-transfer/heat-transfer-in-buildings-application-to-solar-air-collector-and-trombe-wall-design
Evaporation, condensation and heat transfer

Droits : info:eu-repo/semantics/OpenAccess
ISBN : 978-953-307-583-9
hal-00767482
https://hal.archives-ouvertes.fr/hal-00767482
https://hal.archives-ouvertes.fr/hal-00767482/document
https://hal.archives-ouvertes.fr/hal-00767482/file/InTecSubmitted.pdf

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : Inter-Research
Résumé : The pathogenicity of Vibrio penaeicida Strains KH-1 and AM101, their culture-free supernatant (CFS), and their protein fraction obtained by 40% of ammonium sulfate precipitation (PFs40) were assessed in experimental challenges against juvenile Litopenaeus vannamei. Live Vibrio cells, CFS, and PFs40 from the AM101 strain produced a significantly higher mortality (p < 0.05) compared to the KH-1 strain. Toxicity and median lethal doses (LD50) of Fast Protein Liquid Chromatography (FPLC) products were evaluated on L. vannamei. The first FPLC fraction sample (A) from PFs40 of the AM101 strain displayed LD50 values of 1.68 and 5.61 mu g protein ind.(-1), respectively. The second FPLC process from Fraction A showed a peak (A1) also with toxic effects to shrimp. PFs40, Fraction A, and Peak At showed a 38.5 kDa molecular band (SDS-PAGE), with activity on a gelatin protease zymogram. The lethal effect of PFs40 and Fraction A was inhibited by Proteinase K, CuCl2, E-64, and heat (60 and 100 degrees C) treatments, but was not inhibited by EDTA-Na-2, aprotinin, and soy trypsin treatments. These results and the zymogram inhibition test suggest the presence of a cysteine protease-like proteinaceous exotoxin as a dominant protease, secreted by V. penaeicida Strain AM101.
Diseases of aquatic organisms (0177-5103) (Inter-Research), 2005-11 , Vol. 67 , N. 3 , P. 201-207

Droits : Inter-Research 2005
http://archimer.ifremer.fr/doc/2005/publication-3618.pdf
DOI:10.3354/dao067201
http://archimer.ifremer.fr/doc/00000/3618/

Éditeur(s) : HAL CCSD IEEE
Résumé : International audience
This paper proposes a novel automated approach for the categorization of cells in fluorescence microscopy images. Our supervised classification method aims at recognizing patterns of unlabeled cells based on an annotated dataset. First, the cell images need to be indexed by encoding them in a feature space. For this purpose, we propose tailored bio-inspired features relying on the distribution of contrast information. Then, a supervised learning algorithm is proposed for classifying the cells. We carried out experiments on cellular images related to the diagnosis of autoimmune diseases, testing our classification method on the HEp-2 Cells dataset of Foggia et al (CBMS 2010). Results show classification precision larger than 96% on average, thus confirming promising application of our approach to the challenging application of cellular image classification for computer-aided diagnosis.
ICPR 2012
Tsukuba, Japan

hal-00958856
https://hal.archives-ouvertes.fr/hal-00958856
https://hal.archives-ouvertes.fr/hal-00958856/document
https://hal.archives-ouvertes.fr/hal-00958856/file/icpr_2012.pdf

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : In French Guiana, the population growth will result in an increase in demand for agricultural products and thus, will lead to an increase in the amount of tropical forests converted into cropland or pasture. Impacts of different agricultural systems on greenhouse gas (GHG) fluxes have not been studied in French Guiana. In this context, the fire-free chop-and-mulch method was used to convert a tropical forest site to agriculture. This study focused on soil nitrous oxide (N2O) emissions and we compared four land uses: (1) the undisturbed tropical forest, (2) recently converted grassland and recently converted croplands (fertilized soybean/maize rotation) with either (3) disk tillage or (4) no tillage.N2O measurements were obtained through the chamber technique and conducted over a 1-year period (measurements began 19 months after the forest was cleared). N2O fluxes were related to soil parameters measured at each sampling date: nitrate and ammonium contents, gravimetric water content (GWC) and temperature.Through the entire period, the mean (±standard error) and median N2O fluxes were 3.8 ± 0.5 and 2.7 g N ha−1 day−1, respectively for undisturbed tropical forest and 2.4 ± 0.9 and 0.8 g N ha−1 day−1, respectively for grassland (mowed Brachiaria ruziziensis). For croplands, no significant difference was found for N2O emissions between both agricultural practices. The mean (±standard error) and median N2O fluxes were 8.5 ± 1.2 and 4.0 g N ha−1 day−1, respectively for disk tillage plots and 8.5 ± 1.3 and 3.6 g N ha−1 day−1, respectively for no tillage plots. Nitrogen inputs (due to the application of fertilizer or due to the mineralization of crop residues) led to higher N2O fluxes, resulting in significantly higher mean N2O emissions from croplands compared to the forest, when only considering land use effect on N2O fluxes in a statistical model. The soil nitrate content, GWC and temperature had a significant positive effect on N2O fluxes. Taking into account these soil parameters in another statistical model, N2O emissions from croplands were not higher than the natural N2O emissions from tropical forest soils. Our results suggest that, if more forest will have to be converted in the course of the expected population growth in French Guiana, it could have low impact on the soil N2O fluxes (similar to natural fluxes from forest) with the improving of farming techniques (for example modification of the splitting of N-fertilizer) in the cropping plots.
ISSN: 0167-8809

hal-01204228
https://hal.archives-ouvertes.fr/hal-01204228
DOI : 10.1016/j.agee.2015.04.004
PRODINRA : 307607

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
The data available in the literature concerning wood cutting forces permit to build models or to simulate the main wood machining processes (milling, sawing, peeling etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimize cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: (1) providing data to optimise the settings for a given operation (batch approach) and (2) building predictive models that could be the basis of an online control systems for the machining processes (interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With potential industrial applications in focus, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Though not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technologic knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003/document
https://hal.archives-ouvertes.fr/hal-00876003/file/LABOMAP_Holzforschung_2009_denaud.pdf
ENSAM : http://hdl.handle.net/10985/7419

Résumé : Les biofilms électroactifs (EA) sont des consortia bactériens mono ou pluri-espèces, qui ont la faculté d’échanger des électrons provenant de leur métabolisme avec les surfaces solides conductrices des électrodes. Cette découverte est à l’origine d’un nouveau dispositif énergétique : la pile à combustible microbienne (PACM). Depuis les années 2000, la littérature scientifique sur les biofilms EA et sur les PACM explose, notamment grâce à la découverte de bactéries capables de transférer par voie directe – par des pili ou protéines transmembranaires – des électrons vers les électrodes. Plusieurs sources de bactéries EA ont été à ce jour découvertes, allant de cultures pures à des communautés bactériennes plus complexes. Ces dernières sont issues de milieux aqueux naturels (milieux marins ou d’eau douce), industriels ou urbains (effluents d’industrie, eaux usées domestiques). La plupart de ces sources bactériennes proviennent d’environnements de climat tempéré. Dans ce travail de thèse, plusieurs sols de milieux humides de la Guyane ont été identifiés comme étant de sources de bactéries EA. Les expériences menées sous potentiel d’électrode imposé et constant ont permis d’étudier l’adhésion à la surface d’électrode des biofilms EA issus de la flore endogène des milieux sélectionnés. La formation de bioanodes et de biocathodes a été possible en présence respectivement d’acétate et d’oxygène dans les milieux. Une étude par voltammétrie cyclique a mis en évidence les pics d’oxydo-réduction en lien avec les échanges électroniques du biofilm EA et de l’électrode. En optimisant la procédure de formation des biofilms EA par chronoampérométrie (surface d’électrode plus importante, apport en continu et progressif du substrat), une densité de courant maximale de 12 A/m2 et un rendement faradique de 24 % ont été obtenus. Une autre méthode pour former des biofilms EA à partir d’un milieu choisi, la mangrove, a consisté à utiliser deux prototypes de PACM : une pile à compartiment unique et à cathode à air, et une pile benthique. Dans les deux cas, les biofilms EA ont pu être formés et étudiés, complétant certaines observations faites sous potentiel imposé. La PACM benthique s’est avérée être la plus proche d’une application à grande échelle puisqu’elle a été complètement autonome : anode et cathode utilisant uniquement le milieu pour fonctionner. Elle a pu être étudiée en laboratoire comme sur le terrain.
Electroactive biofilms (EA) are mono or multi-species bacterial consortia, which have the ability to exchange electrons from their metabolism with solid surfaces of conductive electrodes. This discovery is the basis for a device of energy production: microbial fuel cell (MFC). Since the 2000s, the scientific literature on EA biofilms and MFC explodes, thanks to the discovery of bacteria that are able to transfer directly – by pili or trans-membrane proteins – electrons to electrodes. Several sources of EA bacteria were discovered to date, ranging from pure cultures to more complex bacterial communities. Those last are from natural (marine and freshwater), industrial or urban (industrial effluents, domestic wastewater) aqueous environments. However, the vast majority of these are from temperate environments.In this thesis, several wetland soils of French Guiana have been identified as sources of EA bacteria. Experiments under poised and constant electrode potential were used to examine adherence to the electrode surface of EA biofilms from the endogenous flora of selected environments. Formation of bioanodes and biocathodes was possible in the presence respectively of acetate and oxygen in the media. A study by cyclic voltammetry showed the redox peaks related to electronic exchanges between EA biofilm and electrode. By optimizing the process of EA biofilm formation by chronoamperometry (larger electrode surface, providing continuous and progressive substrate), a maximum current density of 12 A/m2 and a coulombic efficiency of 24% were obtained.Another method to form EA biofilms from a chosen medium (mangrove) was to use two MFC prototypes: a single compartment and air cathode one, and a benthic one. In both cases, the EA biofilms have been trained and studied supplementing certain observations made under poised polarization. MFC benthic proved to be the closest to a wide application since it was completely autonomous, anode and cathode only using the medium to function. It has been studied in the laboratory and in the field.

http://www.theses.fr/2012AGUY0560/document

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : National audience
OBJECTIVES: Medical tools to determine the imminence of unplanned out-of-hospital birth have not been validated. The main goal of this study was to analyze assessments of the imminence of these deliveries, by methods such as the Manilas score and the need to push. PATIENTS AND METHODS: All calls made to the Emergency Medical Aid Service in Guadeloupe concerning risks of unplanned delivery between January 1st and June 30th 2011 were reviewed retrospectively, and 69 of the 85 cases cared for by the hospital mobile emergency unit were included. RESULTS: Risks of unplanned out-of-hospital deliveries represented 1.9% of the calls during the study period. The Malinas score was used for dispatching in only 13% and was not used for intervention in any case. It was estimated that the need-to-push feeling was used for 58% (dispatching) and 54.5% (intervention) of patients. Its sensitivity, specificity and predictive values were higher than those of the Malinas score in dispatching and substantially higher in intervention. CONCLUSION: These results argue for the development of tools for estimating the imminence of unplanned delivery. Such tools should be applicable in extra-hospital emergency situations to ensure their use in practice.
ISSN: 0368-2315

hal-01063667
https://hal.archives-ouvertes.fr/hal-01063667
DOI : 10.1016/j.jgyn.2013.01.009
PUBMED : 23490410

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper demonstrates that a human being using an interface can be efficiently evaluated - in real time - by embedding basic measurements in the interface and using a suitable trained artificial neural network. The approach is introduced through video games but is suitable for any machine capable of valuable measurements on user actions. Of course, the quality of the "diagnostic" depends of the learnability of the task and of the size and quality of the learning base. Typical applications include the detection of fatigue, stress, emotions, the influence of a drug or of medical treatments ; screening a deficit or adequateness to a task, etc. Two successful prototypes are presented, one to predict the mental age of children through a set of simple basic games, and the other to detect if a subject is right-handed of left-handed through a racing car simulation.
Proceeding of the Third International Conferences on Advances in Computer-Human Interactions
St. Maarten, Netherlands Antilles

hal-00601476
https://hal.archives-ouvertes.fr/hal-00601476

Éditeur(s) : HAL CCSD
Résumé : This study assesses the place of MSEs in Haiti and gives a brief description of the relevant economic, regulatory and technological instruments of economic development and environmental protection. The discussions suggest that the application of such instruments will encourage and improve economic development in Haiti. The infrastructure necessary for MSEs drives growth and offers added value to economic development in Haiti. With an overview of Haitian MSEs we have been able to identify and palliate insufficiencies in the legislative framework regulating the operation of MSEs, as well as, understand their involvement in economic growth. MSEs are a powerful tool to reduce poverty, facilitate economic development and reinforce policies supporting environmental protection.
Ce travail dresse un bilan sur la situation des TPE en Haïti et propose une analyse succincte de l’impact des instruments économiques, règlementaires et technologique au développement économique et à la protection de l’environnement. Les discussions menées ont permis de découvrir que l’application de ces instruments est une perspective d’amélioration du développement économique des TPE.La structuration des TPE reste la principale action stratégique de croissance et représente une grande valeur ajoutée pour le développement économique du pays. Le panorama des TPE haïtiennes nous a permis de compléter les insuffisances du cadre légal réglementant le fonctionnement des TPE et de comprendre leur participation à la croissance économique du pays. Ce sont des outils indispensables pour réduire la pauvreté, faciliter le développement économique et renforcer les politiques de protection de l’environnement à travers le pays.
https://hal.univ-antilles.fr/hal-01292918

hal-01292918
https://hal.univ-antilles.fr/hal-01292918
https://hal.univ-antilles.fr/hal-01292918/document
https://hal.univ-antilles.fr/hal-01292918/file/Final-IER_Article%20P.%20SIMON.pdf

Éditeur(s) : HAL CCSD
Résumé : Meteorological phenomena with scales lower than hurricanes, from extreme rainfalls to pollution peaks, represent important environmental and health risks in the Caribbean. These examples show the need to downscale large-scale meteorological data to island-scale fields.The main goal of the present numerical study is the analysis of the meso- and micro-scale mechanisms inducing diurnal and nocturnal circulations in the Guadeloupe archipelago. The Weather Research and Forecasting model is employed. The micro-scale results are obtained by the coupling of the 1-km simulated fields and the Large Eddy Simulation method. Then, in order to analyze the dispersion of a pollutants plume, the micro-scale outputs with 111 m of resolution are used to force the lagrangian particles dispersion model FLEXPART. The study has been conducted for three real cases of weather types linked with strong, medium and weak trade winds.The results of simulations, validated with available observed data, permitted to simulate all local circulations, including a nocturnal counter-current flow which may induce a pollution peak in the urban area of Pointe-à-Pitre city.These works, which may be applied to other Lesser Antilles islands, suggest many environmental and energy applications.
Les phénomènes météorologiques d'échelles inférieures aux cyclones, depuis les pluies intenses, jusqu'à la dégradation de la qualité de l'air, ont pour les Caraïbes une importance aiguë en termes de risques naturels ou de risques sur la santé. Ces exemples attestent de la nécessité d'utiliser des méthodes de descentes d'échelle pour exploiter l'information météorologique de grande échelle et dériver des scénarios locaux appliqués aux territoires insulaires. Les travaux présentés ont pour principaux objectifs la simulation numérique et l'analyse des mécanismes méso- et micro-échelles qui induisent des circulations locales diurnes et nocturnes sur l'archipel de la Guadeloupe, à l'aide du modèle numérique météorologique Weather Research and Forecasting. Les résultats des simulations micro-échelles sont obtenus par le couplage des champs modélisés à 1 km avec la méthode Large Eddy Simulation. Les sorties micro-échelles, à 111 m, sont ensuite utilisées pour forcer le modèle lagrangien de dispersion de particules FLEXPART afin d'étudier la dispersion d'un panache de polluants. L'étude a été menée pour trois cas réels de situations météorologiques correspondant à des alizés soutenus, moyens et faibles. Les résultats des simulations, après validation, et comparaison aux données d'observation disponibles, permettent de restituer l'ensemble des circulations locales et soulignent l'existence d'un écoulement nocturne à contre courant susceptible d'induire une forte pollution sur la zone urbaine de Pointe-à-Pitre. Cette étude, transposable aux autres îles des petites Antilles, laisse envisager de nombreuses applications environnementales et énergétiques.
https://hal.archives-ouvertes.fr/tel-01074600

Droits : info:eu-repo/semantics/OpenAccess
tel-01074600
https://hal.archives-ouvertes.fr/tel-01074600
https://hal.archives-ouvertes.fr/tel-01074600/document
https://hal.archives-ouvertes.fr/tel-01074600/file/rcece_thesis.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : Validation of building energy simulation programs is of major interest to both users and modellers. To achieve such a task, it is essential to apply a methodology based on a priori test and empirical validation. A priori test consists in verifying that models embedded in a program and their implementation are correct. this should be achieved before carrying out experiments. The aim of this report is to present results from the application of the BESTEST procedure to our code. We will emphasise the way it allows to find bugs in our program and also how it permits to qualify models of heat transfer by conduction
World Renewable Energy Congress VI Renewables: The Energy for the 21st Century World Renewable Energy Congress VI 1-7 July 2000 Brighton, UK

ISBN : 978-0-08-043865-8
hal-00767562
https://hal.archives-ouvertes.fr/hal-00767562
https://hal.archives-ouvertes.fr/hal-00767562/document
https://hal.archives-ouvertes.fr/hal-00767562/file/TedWrec2000.pdf

Éditeur(s) : HAL CCSD Optical Society of America
Résumé : International audience
A linear least square (LLS) method is proposed to process polarization dependent SHG intensity analysis at pixel-resolution level in order to provide an analytic solution of nonlinear susceptibility χ(2) coefficients and of fibril orientation. This model is applicable to fibrils with identical orientation in the excitation volume. It has been validated on type I collagen fibrils from cell-free gel, tendon and extracellular matrix of F1 biliary epithelial cells. LLS is fast (a few hundred milliseconds for a 512 × 512 pixel image) and very easy to perform for non-expert in numerical signal processing. Theoretical simulation highlights the importance of signal to noise ratio for accurate determination of nonlinear susceptibility χ(2) coefficients. The results also suggest that, in addition to the peptide group, a second molecular nonlinear optical hyperpolarizability β contributes to the SHG signal. Finally from fibril orientation analysis, results show that F1 cells remodel extracellular matrix collagen fibrils by changing fibril orientation, which might have important physiological function in cell migration and communication.
ISSN: 1094-4087

hal-01139871
https://hal.archives-ouvertes.fr/hal-01139871
DOI : 10.1364/OE.23.013309
PUBMED : 26074581

Éditeur(s) : HAL CCSD Springer
Résumé : Third International Workshop, MLMI 2012, Held in Conjunction with MICCAI 2012
International audience
Universal Nearest Neighbours (unn) is a classifier recently proposed, which can also effectively estimates the posterior probability of each classification act. This algorithm, intrinsically binary, requires the use of a decomposition method to cope with multiclass problems, thus reducing their complexity in less complex binary subtasks. Then, a reconstruction rule provides the final classification. In this paper we show that the application of unn algorithm in conjunction with a reconstruction rule based on the posterior probabilities provides a classification scheme robust among different biomedical image datasets. To this aim, we compare unn performance with those achieved by Support Vector Machine with two different kernels and by a k Nearest Neighbours classifier, and applying two different reconstruction rules for each of the aforementioned classification paradigms. The results on one private and five public biomedical datasets show satisfactory performance.
Machine Learning in Medical Imaging
Nice, France

hal-00958909
https://hal.archives-ouvertes.fr/hal-00958909
https://hal.archives-ouvertes.fr/hal-00958909/document
https://hal.archives-ouvertes.fr/hal-00958909/file/Miccai.pdf
DOI : 10.1007/978-3-642-35428-1_15