Éditeur(s) : HAL CCSD
Résumé : Based on fieldwork and modern analytical technics, this work presents an overview of the Mid-Cretaceous hyper-extended rift system exposed in the northern part of the Pyrenean mountain range. Its inversion during the Pyrenean orogeny allows for precious observations of the deep-seated processes occurring at the foot of distal margins. Some peculiar aspects characterizing the pre-Alpine hyper-extended domain are examined throughout the 400km long suture that is fossilized in the North Pyrenean Zone (NPZ). The High Temperature/Low Pressure (HT/LP) thermal imprint of the extensional event is studied thanks to a dataset of more than hundred peak temperature measurement by Raman spectroscopy of the carbonaceous material (RSCM). The pre- and syn-rift metasediments are characterized by an intense ductile deformation. Field and EBSD investigations of the mechanisms of deformation reveal ductile and syn-metamorphic processes. The emplacement conditions of the peridotite into crustal levels and localized exhumation is examined in the key-localities of Urdach, Saraillé-Tos de la Coustette, Moncaup, Lherz, Caussou-Bestiac and Salvezines, The results indicate an early boudinage of the crust during the rifting process, resulting in the direct superposition of pre-rift sediments on top of mantle peridotites. Field, textural and isotopic characterization of the various ophicalcite and breccias found in the vicinity of the peridotite outcrops allow to decipher their exhumation history. New Ar-Ar geochronological results allow to precise the temporal evolution of the NPZ.
Cette thèse présente une analyse structurale et thermique des marges passives crétacées inversées dans la Zone Nord Pyrénéenne (ZNP). L'application du paléothermomètre RSCM (spectrométrie Raman de la matière carbonée) sur plus de cent échantillons répartis à travers la ZNP permet de préciser l'évolution thermique de la déchirure continentale. Un métamorphisme de haute température (450 à >600°C) se développe particulièrement au droit de zones ou la croûte continentale est extrêmement amincie voire éliminée. Les sédiments pré- et syn-rift sont marqués par une intense déformation ductile. L'analyse à l'EBSD des fabriques minérales indique une déformation de Haute-température contemporaine du métamorphisme HT-BP. Les conditions de mise en place crustale des péridotites et leur exhumation localisée sont examinées dans les localités d'Urdach, Saraillé-Tos de la Coustette, Moncaup, Lherz, Caussou-Bestiac et Salvezines. Les résultats indiquent un boudinage de la croûte continentale au cours du processus de rifting. Des décollements de couverture, principalement localisés dans les évaporites triasiques conduisent à la superposition directe des sédiments pré-rift sur le manteau exhumé. La notion nouvelle de soutirage crustal est introduite pour désigner ce processus dans lequel l'écoulement gravitaire ne joue pas un rôle principal. La caractérisation sédimentologique, pétrographique et isotopique (O et C) des différentes formations de brèches et ophicalcites observées à proximité des corps de péridotites permet de reconstituer les étapes de l'exhumation du manteau en pied de marge. Enfin de nouvelles datations permettent de mieux contraindre le calendrier des évènements successifs.
https://tel.archives-ouvertes.fr/tel-00787952

tel-00787952
https://tel.archives-ouvertes.fr/tel-00787952
https://tel.archives-ouvertes.fr/tel-00787952/document
https://tel.archives-ouvertes.fr/tel-00787952/file/TheI_se-Clerc-2012.pdf

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
The Alboran Domain, situated at the western end of the Mediterranean subductionsystem, is characterized by the Ronda Peridotites, one of the world largest exposures of subcontinental mantle. Using U-Pb (LA-ICP-MS) and Ar-Ar dating, we precisely dated twotectonic events associated with the Tertiary exhumation of the Ronda Peridotites. First,shearing along the Crust-Mantle Extensional Shear Zone caused, at ca. 22.5 Ma, mantleexhumation, local partial melting in the deep crust and coeval cooling in the upper crust.Second, the Ronda Peridotites Thrust triggered the final crustal emplacement of theperidotites onto the continental crust at ca. 21 Ma, as testified by granitic intrusions in thethrust hanging-wall. The tectonic evolution of the western Alboran Domain is thereforecharacterized by a fast switch from a continental lithosphere extension in a backarc setting,with sub-continental mantle exhumation, to a rift inversion by thrusting driven by shorteningof the subduction upper plate
ISSN: 0954-4879

insu-01441962
https://hal-insu.archives-ouvertes.fr/insu-01441962
https://hal-insu.archives-ouvertes.fr/insu-01441962/document
https://hal-insu.archives-ouvertes.fr/insu-01441962/file/Frasca-TerraNova-2017.pdf
DOI : 10.1111/ter.12255

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
New U–Pb monazite, zircon, and xenotime ages date the Late Carboniferous crystallization of the anatectic Vialais granite in the Montagne Noire Axial Zone and the high-temperature deformation and metamorphism of the augen gneiss (Ordovician granite protolith) from which the granite was likely derived. The U–Pb monazite ages obtained from the augen gneiss (308 ± 3 Ma), late kinematic Vialais granite (303 ± 4 Ma), and post-kinematic leucogranite (298 ± 2 Ma), bracket the high-temperature deformation and metamorphism at ~ 310–300 Ma, clearly postdating regional contraction and nappe emplacement (> 320 Ma). The planar–linear and locally linear fabrics in the augen gneiss outline a regional-scale double dome structure (Caroux and Espinouse sub-domes) containing smaller (km-scale) upright folds. Compared to the Caroux sub-dome, the larger, migmatitic Espinouse sub-dome contains abundant leucosome, leucogranite bodies and late-kinematic intrusions (Vialais granite). The Vialais granite displays a weak magmatic foliation that defines the main layering of the Espinouse migmatite. Ellipsoidal quartz–sillimanite nodules concentrated above the roof of the granite recorded an increment of strain (vertical shortening, E–NE elongation) during granite emplacement and crystallization, consistent with the extension event that exhumed the domes. These new geochronological and structural data suggest that the Montagne Noire double dome formed in a pull-apart structure within a dextral strike–slip system. Upright folding in the sub-domes has been traditionally assigned to a regional contraction event; alternatively, we propose that local contraction is associated with the convergence of low-viscosity crust beneath the upper crust pull-apart. Dynamic models of extension of hot crust indicate that contraction at depth is generated by flow of low-viscosity orogenic crust converging and rising to fill the gap created by upper crust extension. This interpretation solves the long-standing problem of apparent coeval contraction and extension in the Montagne Noire double dome and establishes migmatite dome emplacement in strike–slip corridors as a style of late Variscan tectonics.
ISSN: 0040-1951

insu-01112009
https://hal-insu.archives-ouvertes.fr/insu-01112009
DOI : 10.1016/j.tecto.2014.12.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In Western Mediterranean, the Rif belt in Morocco is part of the Gibraltar Arc built during the Tertiary in the framework of Eurasia-Africa convergence. The structural and metamorphic evolution of the internal units of this belt as well as their timing, crucial to constrain the geodynamic evolution of the Alboran Sea, is still largely debated.Our study on the Ceuta Peninsula (Northern Rif) provides new structural, petrological and geochronological data (U-Th-Pb, Ar-Ar), which allow to precise the tectono-metamorphic evolution of the Lower Sebtides metamorphic units with:(1) a syn-metamorphic thrusting event developed under granulite facies conditions (7–10 kbar and 780–820 °C). A major thrust zone, the Ceuta Shear Zone, drove the emplacement of metapelites and peridotitic lenses from the Ceuta Upper Unit over the orthogneisses of the Monte Hacho Lower Unit. This compressional event ended during the Upper Oligocene.(2) an extensional event developed at the boundary between amphibolite and greenschist facies conditions (400–550 °C and 1–3 kbar). During this event, the Ceuta Shear Zone has been reactivated as a normal fault. Normal ductile shear zones contributed to the final exhumation of the metamorphic units during the Early Miocene.We propose that the compressional event is related to the formation of an orogenic wedge located in the upper plate, in a backward position, of the subduction zone driving the geodynamic evolution of the Alboran domain. In this context, the episode of lithospheric thinning could be related to the opening of the Alboran basin in a back-arc position.Furthermore, unlike the previous models proposed for the Rif belt, the tectonic coupling between mantle peridotites and crustal metamorphic rocks occurred in Ceuta Peninsula at a depth of 20–30 km under high temperature conditions, before the extensional event, and thus cannot be related to the back-arc extension.
ISSN: 0040-1951

insu-01682810
https://hal-insu.archives-ouvertes.fr/insu-01682810
DOI : 10.1016/j.tecto.2017.11.028

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use velocities from 65 continuous stations and 31 survey-mode GPS sites as well as kinematic modeling to investigate present day deformation along the Africa-Iberia plate boundary zone in the western Mediterranean region. The GPS velocity field shows southwestward motion of the central part of the Rif Mountains in northern Morocco with respect to Africa varying between 3.5 and 4.0 mm/yr, consistent with prior published results. Stations in the southwestern part of the Betic Mountains of southern Spain move west-southwest with respect to Eurasia (similar to 2-3 mm/yr). The western component of Betics motion is consistent with partial transfer of Nubia-Eurasia plate motion into the southern Betics. The southward component of Betics motion with respect to Iberia is kinematically consistent with south to southwest motion of the Rif Mountains with respect to Africa. We use block modeling, constrained by mapped surface faults and seismicity to estimate the geometry and rates of strain accumulation on plate boundary structures. Our preferred plate boundary geometry includes one block between Iberia and Africa including the SW Betics, Alboran Sea, and central Rif. This geometry provides a good fit to the observed motions, suggesting a wide transpressive boundary in the westernmost Mediterranean, with deformation mainly accommodated by the Gloria-Azores fault system to the West and the Rif-Tell lineament to the East. Block boundaries encompass aspects of earlier interpretations suggesting three main deformation styles: (i) extension along the NE-SW trending Trans-Alboran shear zone, (ii) dextral strike-slip in the Betics corresponding to a well defined E-W seismic lineament, and (iii) right lateral strike-slip motion extending West to the Azores and right-lateral motion with compression extending East along the Algerian Tell. We interpret differential motion in the Rif-Alboran-Betic system to be driven both by surface processes related the Africa-Eurasia oblique convergence and sub-crustal dynamic processes associated with the long history of subduction of the Neotethys ocean lithosphere. The dextral slip identified in the Betic Mountains in Southern Spain may be related to the offshore fault that produced the Great 1755 Lisbon Earthquake, and as such may represent a significant seismic hazard for the West Mediterranean region.
ISSN: 0012-821X

hal-00618337
https://hal.archives-ouvertes.fr/hal-00618337
DOI : 10.1016/j.epsl.2011.05.048

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The identification of the structures and deformation patterns in magma-poor continental rifted margins is essential to characterize the processes of continental lithosphere necking. Brittle faults, often termed mantle detachments, are believed to play an essential role in the rifting processes that lead to mantle exhumation. However, ductile shear zones in the deep crust and mantle are rarely identified and their mechanical role remains to be established. The western Betics (Southern Spain) provides an exceptional exposure of a strongly thinned continental lithosphere, formed in a supra-subduction setting during Oligocene-Lower Miocene. A full section of the entire crust and the upper part of the mantle is investigated. Variations in crustal thickness are used to quantify crustal stretching that may reach values larger than 2000% where the ductile crust almost disappear, defining a stage of hyper-stretching. Opposite senses of shear top-to-W and top-to-E are observed in two extensional shear zones located close to the crust-mantle boundary and along the brittle-ductile transition in the crust, respectively. At locations where the ductile crust almost disappears, concordant top-to-E-NE senses of shear are observed in both upper crust and serpentinized mantle. Late high-angle normal faults with ages of ca. 21 Ma or older (40Ar/39Ar on white mica) crosscut the previously hyper-stretched domain, involving both crust and mantle in tilted blocks. The western Betics exemplifies, probably better than any previous field example, the changes in deformation processes that accommodate the progressive necking of a continental lithosphere. Three successive steps can be identified: i/a mid-crustal shear zone and a crust-mantle shear zone, acting synchronously but with opposite senses of shear, accommodate ductile crust thinning and ascent of subcontinental mantle; ii/hyper-stretching localizes in the neck, leading to an almost disappearance of the ductile crust and bringing the upper crust in contact with the subcontinental mantle, each of them with their already acquired opposite senses of shear; and iii/high-angle normal faulting, cutting through the Moho, with related block tilting, ends the full exhumation of the mantle in the zone of localized stretching. The presence of a high strength sub-Moho mantle is responsible for the change in sense of shear with depth. Whereas mantle exhumation in the western Betics occurred in a backarc setting, this deformation pattern controlled by a high-strength layer at the top of the lithosphere mantle makes it directly comparable to most passive margins whose formation lead to mantle exhumation. This unique field analogue has therefore a strong potential for the seismic interpretation of the so-called “hyper-extended margins”.
ISSN: 0264-8172

insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895/document
https://hal-insu.archives-ouvertes.fr/insu-01310895/file/Frasca-MarPetGeol-2016.pdf
DOI : 10.1016/j.marpetgeo.2016.04.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cycladic Blueschist Unit (CBU) represents the northern passive margin of the Adria continental block and ophiolites that are the remnants of the Pindos Ocean, which were affected by high pressure-low temperature metamorphism in the blueschist and eclogite facies during the Eocene. Prior to the Lutetian, the ophiolitic and margin units were thrust towards the SW inside a NE-dipping subduction zone. Two subsequent exhumation stages are characterized by top-to-the-NE senses of shear: i) from mantle depths to lower crustal levels, before 37 Ma, which was accommodated by an extensional inversion of the Vardar suture zone, and ii) from deep crustal levels to the near-surface, between 30 and 20 Ma, which was accommodated by the North Cycladic Detachment. It is during this late stage of ductile exhumation that the central Cyclades Core Complex was exhumed. Segmentation of the CBU by normal faults started at 12 Ma, as recorded by the low temperature thermochronometers, and was coeval with block rotation and folding with NS-trending axes, which were predominantly controlled by the Myrthes-Ikaria strike-slip fault in the centre of the Cyclades. A map restoration of the CBU geometry, prior to segmentation, has been carried out using available structural and paleomagnetic data. The restoration shows that, following the CBU exhumation from mantle depths to crustal levels, a single core complex was exhumed along a single NE dipping detachment.
ISSN: 0040-1951

insu-00672320
https://hal-insu.archives-ouvertes.fr/insu-00672320
DOI : 10.1016/j.tecto.2011.12.025

Éditeur(s) : American Geophysical Union
Résumé : We use seismic reflection and rock sample data to propose that the first-order physiography of New Caledonia Trough and Norfolk Ridge formed in Eocene and Oligocene time and was associated with the onset of subduction and back-arc spreading at the Australia-Pacific plate boundary. Our tectonic model involves an initial Cretaceous rift that is strongly modified by Cenozoic subduction initiation. Hence, we are able to explain (1) complex sedimentary basins of inferred Mesozoic age; (2) a prominent unconformity and onlap surface of middle Eocene to early Miocene age at the base of flat-lying sediments beneath the axis of New Caledonia Trough; (3) gently dipping, variable thickness, and locally deformed Late Cretaceous strata along the margins of the trough; (4) platform morphology and unconformities on either side of the trough that indicate a phase of late Eocene to early Miocene uplift to near sea level, followed by rapid Oligocene and Miocene subsidence of similar to 1100-1800 m; and (5) seismic reflection facies tied to boreholes that suggest absolute tectonic subsidence at the southern end of New Caledonia Trough by 1800-2200 m since Eocene time. The Cenozoic part of the model involves delamination and subduction initiation followed by rapid foundering and rollback of the slab. This created a deep (>2 km) enclosed oceanic trough, similar to 2000 km long and 200-300 km across, in Eocene and Oligocene time as the lower crust detached, with simultaneous uplift and local land development along basin flanks. Disruption of Late Cretaceous and Paleogene strata was minimal during this Cenozoic phase and involved only subtle tilting and local reverse faulting or folding. Basin formation was possible through the action of at least one detachment fault that allowed the lower crust to either be subducted into the mantle or exhumed eastward into Norfolk Basin. We suggest that delamination of the lithosphere, with possible mixing of the lower crust back into the mantle, is more widespread than previously thought and may be commonly associated with subduction initiation, such as Cenozoic events in the Mediterranean and western Pacific.
Tectonics (0278-7407) (American Geophysical Union), 2010-03 , Vol. 29 , N. TC2004 , P. 1-16

Droits : Copyright 2010 by the American Geophysical Union.
http://archimer.ifremer.fr/doc/00001/11271/9283.pdf
DOI:10.1029/2009TC002476
http://archimer.ifremer.fr/doc/00001/11271/

Éditeur(s) : American Geophysical Union
Résumé : [1] During the Zoneco 11 marine geophysical survey (September 2004), two deep reflection seismic profiles recorded by ocean bottom seismometers were acquired in the offshore domain west of New Caledonia. The northern profile crosses the New Caledonia Basin, the Fairway Ridge, the Fairway Basin, and the Lord Howe Rise. The southern profile crosses the Norfolk Rise south of New Caledonia, the New Caledonia Basin, the Fairway Ridge and Basin, and ends at the foot of Lord Howe Rise. On the northern profile the Lord Howe Rise has a crustal thickness of 23 km and exhibits seismic velocities and velocity gradients characteristic of continental crust. The crust thins to 12-15 km in the neighboring Fairway Basin, which is interpreted to be of thinned continental origin based on the seismic velocities. The crustal thickness of the Fairway Rise is 22 km, and it is also interpreted to be of continental origin. The New Caledonian Basin is underlain by crust of 10 km thickness, which shows unusally high velocities (between 7.0 and 7.4) uncharacteristic for either thinned continental or oceanic crust. On the southern profile the Norfolk Rise is also found to be of continental nature. Here, the New Caledonia Basin shows velocities, crustal thickness, and basement roughness characteristic of typical oceanic crust. The crust in the Fairway Basin shows higher velocities than on the northern profile, which could be caused by volcanic intrusions into the crust during extension. A deep reflector in the upper mantle was imaged underneath the New Caledonian Basin on the northern profile.
Journal of Geophysical Research - Solid earth (0148-0227) (American Geophysical Union), 2007-11 , Vol. 112 , N. B11102 , P. NIL_71-NIL_88

Droits : 2007 American Geophysical Union
http://archimer.ifremer.fr/doc/2007/publication-3543.pdf
DOI:10.1029/2007JB005093
http://archimer.ifremer.fr/doc/00000/3543/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The 12 May 2008 the Sichuan earthquake was one of the worst natural disasters in China. Here, we present a detailed picture of the epicentral area inferred geophysical data. Based on the analysis of teleseismic data acquired by a dense seismic network, we highlight an abrupt 20 km Moho offset between the Sichuan Basin and the Tibetan plateau and a horizontal discontinuity at similar to 15 km depth, which may connect with the ruptured zone of the 2008 event. We obtain low mean crustal velocity ratios, which suggest the absence of a thick and extensive zone of partial melt within the crust beneath the eastern part of the Songpan-Garze Terrane. All our data support the idea that the Longmen Shan range mark a zone of active strain localization due to the rigid Yangtze craton resisting eastward displacement of the Tibetan Plateau.
ISSN: 0040-1951

hal-00534471
https://hal.archives-ouvertes.fr/hal-00534471
DOI : 10.1016/j.tecto.2009.11.010

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Although magmatism may occur during the earliest stages of continental rifting, its role in strain accommodation remains weakly constrained by largely 2-D studies. We analyze seismicity data from a 13 month, 39-station broadband seismic array to determine the role of magma intrusion on state-of-stress and strain localization, and their along-strike variations. Precise earthquake locations using cluster analyses and a new 3-D velocity model reveal lower crustal earthquakes beneath the central basins and along projections of steep border faults that degas CO2. Seismicity forms several disks interpreted as sills at 6-10 km below a monogenetic cone field. The sills overlie a lower crustal magma chamber that may feed eruptions at Oldoinyo Lengai volcano. After determining a new ML scaling relation, we determine a b-value of 0.87±0.03. Focal mechanisms for 65 earthquakes, and 13 from a catalogue prior to our array reveal an along-axis stress rotation of ∼60° in the magmatically active zone. New and prior mechanisms show predominantly normal slip along steep nodal planes, with extension directions ∼N90°E north and south of an active volcanic chain consistent with geodetic data, and ∼N150°E in the volcanic chain. The stress rotation facilitates strain transfer from border fault systems, the locus of early-stage deformation, to the zone of magma intrusion in the central rift. Our seismic, structural, and geochemistry results indicate that frequent lower crustal earthquakes are promoted by elevated pore pressures from volatile degassing along border faults, and hydraulic fracture around the margins of magma bodies. Results indicate that earthquakes are largely driven by stress state around inflating magma bodies.
ISSN: 1525-2027

hal-01667198
https://hal.archives-ouvertes.fr/hal-01667198
DOI : 10.1002/2017GC007027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mid-ocean ridge basalt (MORB) is the most abundant magma on Earth, and provides a geochemical window into the mantle. Deriving mantle composition and melting processes from the erupted lavas requires correction to be made for their evolution as they pass through and generate the oceanic crust. This is typically done by assuming that modification of melts in crustal magma chambers occurs exclusively by fractional crystallisation. However, extensive mineral major- and trace element data from a full section of fast-spread lower crustal rocks exposed in Hess Deep (equatorial Pacific Ocean) demonstrate that their evolution is instead controlled by reactive porous flow. These reactions lead to a strong enrichment in, and fractionation of, incompatible trace elements in the melt (as recorded by clinopyroxene compositions), leading to melt compositions far outside of the compositional realm of MORB both in terms of trace element abundances and ratios. The reactive signature increases in strength up section, peaking in varitextured gabbros interpreted to represent the fossilised axial melt lens, indicating that reactive porous flow occurred on the scale of the entire lower crust. The enrichment of the melt is coupled with a strong trace element depletion of plagioclase, olivine, and, to a lesser extent, clinopyroxene cores, suggesting that these phases represent the residues of the reactions from which trace elements have been removed. The dominant role of reactive porous flow, and the resulting deviations from fractional crystallisation predictions, suggest that the lower oceanic crust plays a much more complex and significant role in modifying the compositions of MORB than previously expected, with consequent implications for models of mantle processes.
ISSN: 0012-821X

hal-00814075
https://hal.archives-ouvertes.fr/hal-00814075
DOI : 10.1016/j.epsl.2012.11.012

Éditeur(s) : Elsevier
Résumé : In situ microbialites occurring in reef rocks dredged between 80 and 130 in water depth on the modern fore-reef slopes of Tahiti and the Marquesas islands yield ages ranging from 17,100 2900 to 4410 2250 years BP, suggesting that they played a prominent role during the last deglacial sea level rise. Microbialites developed in both shallow and deep water depositional environments where they characterize various zones of the reef tracts (reef crests, upper reef slopes, deep fore-reef slopes), reflecting contrasting scenarios of microbialite development involving ''reefal microbialites'' in shallow-water settings and ''slope microbialites'' that formed in environments deeper than 1020 in and extending down to more than 100 m. Reefal microbialites correspond to a late stage of encrustation of the dead parts of coral colonies, or more commonly, of related encrusting organisms (red algae and foraminifers), thus forming surface crusts. Slope microbialites generally form the ultimate stage of a biological succession indicating a deepening sequence, whereby shallow water corals and associated encrusting organisms are replaced by deeper water assemblages of red algae and foraminifers before microbialite growth. The precipitation of phosphatic-iron-manganese crusts and the deposition of planktonic micritic limestones on the microbialites characterize a deepening-upward sequence. The widespread development of microbialites in reef sequences from the Last Deglaciation characterizes a period of environmental degradation consequential oil the rapid sea-level rise and abrupt climatic changes of that time. The reported biological succession reflects changes in water quality, and especially an increase in nutrients. In shallow-water settings, increased alkalinity and nutrient availability in interstitial waters were related to surface fluxes and terrestrial groundwater seepage while slope environments were exposed to continuous upwelling of nutrient-rich deeper waters during the last deglacial sea level rise. The age differences between corals and overlying slope microbialites range from 1600 to 8400 years, based on high-precision U-series age measurements of both corals and microbialites, and indicates that a significant time (several thousand years) elapsed between the development of the coralgal frameworks and the growth of slope microbialite crusts. Microbialites cannot be considered as part of the drowning event some 14,000 years ago that resulted in the demise of reef frameworks in the 90-110 m present depth range, but are Substantially younger. (c) 2006 Elsevier B.V. All rights reserved.
Sedimentary Geology (0037-0738) (Elsevier), 2006-03 , Vol. 185 , N. 3-4 , P. 277-295

Droits : 2006 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2006/publication-4204.pdf
DOI:10.1016/j.sedgeo.2005.12.018
http://archimer.ifremer.fr/doc/00000/4204/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This work focuses on the analysis of a unique set of seismological data recorded by two temporary networks of seismometers deployed onshore and offshore in the Central Lesser Antilles Island Arc from Martinique to Guadeloupe islands. During the whole recording period, extending from January to the end of August 2007, more than 1300 local seismic events were detected in this area. A subset of 769 earthquakes was located precisely by using HypoEllipse. We also computed focal mechanisms using P-wave polarities of the best azimuthally constrained earthquakes. We detected earthquakes beneath the Caribbean forearc and in the Atlantic oceanic plate as well. At depth seismicity delineates the Wadati-Benioff Zone down to 170 km depth. The main seismic activity is concentrated in the lower crust and in the mantle wedge, close to the island arc beneath an inner forearc domain in comparison to an outer forearc domain where little seismicity is observed. We propose that the difference of the seismicity beneath the inner and the outer forearc is related to a difference of crustal structure between the inner forearc interpreted as a dense, thick and rigid crustal block and the lighter and more flexible outer forearc. Seismicity is enhanced beneath the inner forearc because it likely increases the vertical stress applied to the subducting plate.
ISSN: 0040-1951

hal-01052679
https://hal.archives-ouvertes.fr/hal-01052679
DOI : 10.1016/j.tecto.2011.08.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study analyzes the active tectonics within the northwestern and southeastern extensions of the Pambak-Sevan-Syunik fault (PSSF), a major right-lateral strike-slip fault cutting through Armenia. Quantifying the deformations in terms of geometry, kinematics, slip rates and earthquake activity, using cosmogenic 3He, OSL/IRSL and radiocarbon dating techniques, reveal different behaviors between the two regions. Within the northwestern extension, in the region of Amasia, the PSSF bends to the west and splits into two main WNW–ESE trending reverse faults defining a compressional pop-up structure. We estimate an uplift rate and a shortening rate of 0.5 ± 0.1 mm/y and 1.4 ± 0.6 mm/y, respectively. This suggests that most of the ∼2 mm/y right lateral movement of the PSSF seems to be absorbed within the Amasia pop-structure. Within the southeastern extension, the PSSF shows signs of dying out within the Tsghuk Volcano region at the southernmost tip of the Syunik graben. There, the tectonic activity is characterized by a very slow NS trending normal faulting associated with a slight right-lateral movement. Slip rates analyses (i.e. vertical slip rate, EW stretching rate at 90° to the fault, and right-lateral slip rate of ∼0.2 mm/y, ∼0.1 mm/y and ∼0.05 mm/y, respectively) lead to the conclusion that the right lateral movement observed further north along the PSSF is mainly transferred within other active faults further west within the Karabagh (Hagari fault or other structures further northwestwards). Comparing our slip rates with those estimated from GPS data suggests that most of the deformation is localized and seismic, at least within the Tsghuk region. The geometrical and kinematic pattern observed within the two terminations of the PSSF suggests that the fault and its surrounding crustal blocks are presently rotating anticlockwise, as also observed within the GPS velocity field. This is consistent with the recent kinematic models proposed for the Caucasus-Kura-South Caspian region and brings a new insight into the present geodynamics of Armenia.
ISSN: 1040-6182

hal-01307342
https://hal.archives-ouvertes.fr/hal-01307342
DOI : 10.1016/j.quaint.2015.05.021

Éditeur(s) : HAL CCSD
Résumé : This thesis compiles two distinct studies that both document the control of microstructures on rock seismic properties. The first part deals with the development of crystallographic preferred orientations (CPO) in the uppermost mantle associated with melt/fluid-rock interactions, recorded in peridotites xenoliths from the Japan sea back-arc basin. The microstructural and geochemical characteristics of the studied samples reveal that active spreading is associated to uppermost mantle deformation similar to that observed in the Oman ophiolite. At the onset of back-arc spreading, there are no strong interactions between melt percolation and deformation in comparison to continental rift zones, probably due to the relatively small size and short duration of the spreading event. The second part presents a unique database of plagioclase CPO from variously deformed mafic rocks. CPO are grouped in three main types; their characteristics as a function of deformation regime (magmatic or crystal-plastic) are outlined and discussed. Calculated seismic properties of gabbroic rocks show that anisotropy tends to increase as a function of fabric strength, although it is generally weak, due to the competing effect of olivine/clinopyroxene and plagioclase.
Cette thèse regroupe deux études distinctes, qui documentent le contrôle des microstructures sur les propriétés sismiques des roches. La première partie traite du développement des orientations préférentielles cristallographiques (OPC) dans le manteau supérieur, associé aux interactions liquide/magma-roche, enregistré dans des xénolites de péridotites du bassin d'arrière-arc de la mer du Japon. Les caractéristiques microstucturales et géochimiques des échantillons étudiés montrent que l'ouverture arrière-arc active est associée à une déformation du manteau supérieure similaire à celle observée dans l'ophiolite d'Oman. L'initiation de l'extension d'arrière-arc n'est pas associée à de fortes interactions entre percolation magmatique et déformation, en comparaison avec les zones de rifting continentales, probablement en raison des taille et durée relativement petites de l'épisode d'ouverture. La seconde partie présente une base de données unique d'OPC de plagioclase de roches mafiques plus ou moins déformées. Les OPC sont classées en 3 types principaux; leurs caractéristiques en fonction du régime de déformation (magmatique ou plastique) sont présentées et discutées. Les propriétés sismiques calculées des roches gabbroiques montrent que l'anisotropie tend à croitre avec l'intensité des fabriques, bien qu'elle soit généralement faible, en raison des effets opposés des olivines/clinopyroxènes et du plagioclase.
https://tel.archives-ouvertes.fr/tel-00795505

tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505/document
https://tel.archives-ouvertes.fr/tel-00795505/file/Satsukawa_thesis_UM2.pdf

Éditeur(s) : HAL CCSD
Résumé : A section of ancient fast-spreading ocean crust was sampled at Wadi Gideah, located in the Wadi Tayin Massif of the Oman ophiolite. This sample suite was used for generating a coherent data set combining various petro-geochemical and structural investigations, with the aim of building a reference section for advancing our understanding of crustal accretion processes at fast-spreading mid-ocean ridges. Additionally, this study focuses on one outcrop that represents part of the fossil axial melt lens (AML).Major and trace element analyses reveal a trend of chemical evolution up section in the lower crust, with a marked difference between the layered gabbros and the foliated gabbros above. Petrological modeling shows that the chemical evolution up section can be produced by hydrous fractionation crystallization, with melt H2O contents of ~0.8 wt% and 0.8 to 1.2 wt% for the lower and upper crust, respectively. Together with the observed very steep bulk Zr/Hf vs. Zr gradient, high F and Cl content of magmatic amphibole, general Nb-Ta depletion of melts compared with NMORB, and high Sr87/Sr86 ratio compared with modern fast-spread crust, this suggests that Wadi Gideah layered gabbros were accreted by crystallization of ascending melts in sills, in a context of subduction initiation. The distinct changes in chemical trends and average grain size at the layered to foliated gabbro transition are tentatively explained by enhanced hydrothermal cooling deeper than the AML. The gabbro/dike transition displays complex structural and lithological relationships that, together with fractional crystallization modeling, point to episodic vertical movements of the AML. Plagioclase crystallographic preferred orientations (CPO) measured over the whole gabbro section are always consistent with magmatic flow. The CPO strength generally increases downward, with more scattering in the layered gabbro section. From the top to the bottom of the layered gabbros, CPO become progressively more prolate, possibly reflecting increasing shear induced by active mantle flow underneath.Wadi Gideah lower crust recorded a formation history consistent with a hybrid accretion model, combing several processes such as downward magmatic flow and/or upward melt migration in the upper foliated gabbros, sill intrusions in the layered gabbros, and deep hydrothermal circulation. The latter was presumably focused in channels, preserved today as several, up to 100 m wide zones of extensively altered former layered gabbro, cross-cutting the magmatic layering. These metagabbros display significantly higher Sr87/Sr86 ratio, late stage magmatic phases, and evidence for high temperature partial melting.
Une coupe d'ancienne croute océanique rapide a été échantillonnée dans le Wadi Gideah, situé dans le Massif de Wadi Tayin de l'Ophiolite d'Oman. Cette série d'échantillons a permis de générer un jeu de données cohérent, combinant des études pétro-géochimiques et structurales, dans le but de construire une coupe de référence pour mieux contraindre notre compréhension des processus d'accrétion crustale aux dorsales océaniques rapides. Ce travail intègre aussi l'étude détaillée d'un affleurement représentant en partie la lentille magmatique axiale (LMA) fossile.Les analyses d'éléments majeurs et traces révèlent une évolution chimique dans la croûte inférieure, avec une nette différence entre les gabbros lités et les gabbros foliés sus-jacents. La modélisation pétrologique montre que l'évolution chimique vers le haut peut être produite par cristallisation fractionnée hydratée, avec des teneurs en H2O des magmas de ~0.8 wt% dans la croute inférieure et 0.8 to 1.2 wt% dans la croute supérieure. Combiné aux forts gradients de Zr/Hf vs. Zr, aux teneurs élevées de F et Cl dans les amphiboles magmatiques, à l'appauvrissement général en Nb-Ta des magmas comparé aux NMORB, et aux rapports Sr87/Sr86 élevés comparés à la croûte rapide moderne, ceci suggère que les gabbros lités du Wadi Gideah ont été formés par la cristallisation des magmas ascendants dans des sills, dans un contexte d'initiation de subduction. Les changements de signature géochimique et de taille de grain à la transition entre gabbros lités et gabbros foliés témoignent possiblement d'un fort refroidissement hydrothermal plus profond que la LMA. La transition complexe filonien/gabbro montre des relations structurale et lithologiques complexes, qui, combinées o la modélisation de la cristallisation fractionnée, traduisent les mouvements verticaux épisodiques de la LMA. Les orientations préférentielles cristallographiques (OPC) des plagioclases mesurées sur l'ensemble de la coupe dans les gabbros témoignent toujours d'une déformation magmatique. L'intensité des OPC a tendance à augmenter vers le bas, avec une plus forte variabilité dans les gabbros lités. Dans les gabbros lités, les OPC sont de plus en plus linéaires vers le bas, résultant possiblement d'un cisaillement plus fort induit par l'écoulement actif du manteau sous-jacent.La croûte inférieure dans le Wadi Gideah a enregistré une histoire compatible avec un modèle d'accrétion hydride, combinant plusieurs processus tels que l'écoulement magmatique vers le bas et/ou la migration de liquides magmatiques vers le haut dans les gabbros foliés supérieurs, l'intrusion de sills dans les gabbros lités, et une circulation hydrothermale profonde. Cette dernière était probablement concentrée dans des chenaux, préservés aujourd'hui sous la forme de plusieurs zones, dont l'épaisseur atteint 100 m, de gabbros lités fortement altérés, recoupant le litage magmatique. Ces métagabbros ont des rapports Sr87/Sr86 élevés, comportent des phases magmatiques tardives et montrent des évidences de fusion partielle.
https://hal.archives-ouvertes.fr/tel-01302675

tel-01302675
https://hal.archives-ouvertes.fr/tel-01302675
https://hal.archives-ouvertes.fr/tel-01302675/document
https://hal.archives-ouvertes.fr/tel-01302675/file/Th%C3%A8se_Tim-Mueller_2015.pdf

Éditeur(s) : HAL CCSD
Résumé : National audience
Crustal-scale models for the Pyrenees based on ECORS reflection profileshave around 20 years now. In recent years, new understandingswere gained on the reconstruction to the preorogenic times, namelya scenario of extreme crustal attenuation and mantle exhumation ; inturn, this has implications on the interpretation of the present-day structure,as new models for the chain must consider feedbacks between themid-Cretaceous hyperextension and the Pyrenean inversion. On the WcentralPyrenean traverse, the southern part comprises 3 S-vergent basementthrust units, the Lakora, Gavarnie and Guarga units, flanked by thedetached cover of the Jaca piggyback basin and the Ebro basin, wherethe Mesozoic is thin and Late Cretaceous-Tertiary synorogenic carbonateand detrital sequences record a southward depocenter migration.To the N, the Chaînons Béarnais belt (CB) is a system of Jurassic to LowerCretaceous carbonate anticline ridges separated by synclines withthick Albian-Cenomanian flysch, covered to the north by Upper Cretaceousflysch sequences. The CB is thrust southwards together with theLakora thrust unit and northwards onto the Aquitaine basin. CB foldinglargely results from the rising and squeezing of diapirs initiated duringthe Jurassic-Early Cretaceous extension. Pieces of crust and mantle liftedin the diapirs attest that the CB derive from a Cretaceous domainof hyperextended continental crust and exhumed mantle. Moho reflectionsin the ECORS-Arzaq profile constrain the present deep structure.Restoration leads to a Mesozoic cover detachment over the N-Iberianand S-European margins. Inversion began by subduction of the exhumedmantle and folding and pop-up thrusting of the CB cover onto themargins. From the mid-late Eocene onwards, continental collision wasaccommodated by wedging and thrust stacking in the Iberian crust, involvingthe piggyback formation of S-vergent basement thrusts in theupper crust, and the northward subduction of the lower crust.
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080831
https://hal-insu.archives-ouvertes.fr/insu-01080831

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The analysis of 2D deep-seismic-reflection profiles across the slope and abyssal plain of the Angola oceanic basin reveals the existence of a significant and formerly unknown depocentre beneath the giant Cenozoic Congo deep-sea fan, between 7000 m and 9000 m depth, deposited directly onto the Aptian oceanic crust. The unit, which is up to 2.5 km thick and extends for more than 200 km basinwards of the Continent-Ocean boundary, is probably aged Albian-Turonian. Its radial fan-shaped depocentre is centred on the present-day Congo River outlet and contains at least 0.2 Mio km(3) of sediments. These observations and the results from flexural modelling indicate that (1) the location of the Congo River's outlet has remained fairly stable since the Late Cretaceous, and (2) the basal unit was indeed sourced by a palaeo-Congo River probably located nearby the present-day one. Thus, the Atlantic sedimentary system related to the exoreism of the Congo River is much older than previously thought. Thermal modelling indicates that the maturation history of this upper-Cretaceous deposits is highly influenced by the interaction between the initial high heat flow of the young oceanic crust and further increase in sediment supply due to the progradation of the overlying Tertiary deep-sea fan during the Miocene. Hence, despite low present-day heat-flow values, should the unit have source rock potential, its basal section may be currently generating hydrocarbons.;All in all, the results from our models also suggest that the interplay between an initially high heat flow and the further high sediment supply in areas of major river input, may be a key factor for the thermal maturation of potential source rocks deposited onto a present-day "cold" oceanic crust.
ISSN: 0264-8172

hal-00475541
https://hal.archives-ouvertes.fr/hal-00475541
DOI : 10.1016/j.marpetgeo.2009.08.015

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017