Éditeur(s) : HAL CCSD
Résumé : IODP Hole U1309D (IODP Exp. 304-305, 30°N) and ODP Site 1275 (ODP Lag 209, 15°45?N) sampled two oceanic core complexes, at the Mid-Atlantic Ridge. The recovered rocks are mostly gabbroic with some very primitive and olivine rich (Ol>70%). In Hole U1309D, trace element compositions of clinopyroxene and plagioclase poikiloblasts from olivine-rich rocks ndicate that they crystallized from the same melt in all lithologies. Olivine trace element compositions are in disequilibrium with the two other minerals. Olivine crystallographic preferred orientations are weak, with a relatively strong uncommon [001] concentration but consistent with deformation by dislocation creep with activation of the high temperature (010) [100] slip system, commonly described in asthenospheric mantle. The joint study of geochemical processes and microstructures in these rocks suggest a complex crystallization history in an open system with percolation of large volume of MORBtype melt and interaction with the depleted shallow mantle. Olivine-rich rocks are interpreted as the ultimate residue of these melt-mantle reaction processes. At Site 1275, the formation of the more evolved rocks of the gabbroic series is not related to the impregnation event creating olivine-rich rocks.
These rocks represent late magmatic injections, which are completely crystallized at depth as intrusivegabbroic bodies. The results presented in this thesis are consistent with the formation of oceanic core complexes associated with relatively strong magmatic activity, and with the crystallization of most of melt in the lithosphere without basaltic counterpart erupted on the seafloor.
Le puits IODP U1309D (Exp. IODP 304-305, 30°N) et le Site ODP 1275 (Leg ODP 209, 15°45'N) ont permis d'échantillonner deux core complexes océaniques de la dorsale Médio-Atlantique. Les roches récupérées sont principalement gabbroïques dont certaines très primitives et riches en olivine (ol >70%). Dans le puits U1309D, les compositions en éléments en trace des poeciloblastes de clinopyroxène et de plagioclase des roches riches en olivine indiquent qu'ils précipitent depuis le même magma dans toutes les lithologies. La composition en éléments en trace des olivines est en déséquilibre avec ces deux minéraux. Les fabriques cristallographiques de l'olivine sont faibles avec une concentration sur [001] inhabituelle, néanmoins compatibles avec une déformation plastique de haute température, avec l'activation du système de glissement (010) [100] communément décrit dans le manteau asthénosphérique. L'étude conjointe des caractéristiques géochimiques et microstructurales de ces roches met en lumière une histoire complexe de cristallisation dans un système ouvert où de larges volumes de magma de type MORB ont percolé et interagi avec le manteau appauvri superficiel. Ces roches riches en olivine représenteraient le résidu ultime de ces réactions liquide-manteau. Au site 1275, la formation des roches les plus évoluées de la série n'apparaît pas liée à l'événement d'imprégnation formant les roches riches en olivine. Ces roches correspondent à des injections tardives de magma qui ont entièrement cristallisé en profondeur sous forme de plutons intrusifs. Les résultats présentés dans ce mémoire sont compatibles avec une formation des core complexes océaniques associée à une activité magmatique relativement importante, et à une cristallisation complète de tout ou partie de ces magmas dans la lithosphère sans contre-partie volcanique en surface.
https://tel.archives-ouvertes.fr/tel-00354807

tel-00354807
https://tel.archives-ouvertes.fr/tel-00354807
https://tel.archives-ouvertes.fr/tel-00354807/document
https://tel.archives-ouvertes.fr/tel-00354807/file/these_MD.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this study, we propose a theoretical approach to test the validity of the isomechanical analogues for post-perovskite structures. Intrinsic plastic properties are evaluated for three materials exhibiting a post-perovskite phase: MgSiO3, MgGeO3 and CaIrO3. Dislocation properties of each structure are determined using the Peierls-Nabarro model based on first-principles calculations of generalised stacking fault and the plastic properties are extended to crystal-preferred orientations using a visco-plastic self-consistent method. This study provides intrinsic parameters of plastic deformation such as dislocation structures and Peierls stresses that can be directly compared between the three materials. It appears that it is very difficult to draw any simple conclusions on polycrystalline deformation simply by comparing single crystal properties. In particular, contrasting single crystal properties of MgSiO3 and CaIrO3 lead to similar crystal-preferred orientation of the polycrystal aggregates.
ISSN: 0031-9201

hal-00420104
https://hal.archives-ouvertes.fr/hal-00420104
DOI : 10.1016/j.pepi.2008.04.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study reports petrostructural observations in the pargasite and phlogopite-bearing Finero peridotite massif (Italian Western Alps), which suggest that the pervasive foliation in this massif was formed by deformation concomitant with percolation of hydrous Si-rich melts: (1) diffuse contacts, but systematic parallelism between the pyroxenitic layers and the foliation of the peridotite (2) strong shape and crystal preferred orientations (SPO and CPO), but subhedral or interstitial shapes and weak intracrystalline deformation of the hydrous phases, (3) CPO, but interstitial shapes of the pyroxenes, (4) very coarse olivine grain sizes, which are correlated to the olivine abundance, and (5) elongated shapes, but weak intracrystalline deformation, and extremely weak and highly variable CPO of olivine. The pervasive deformation of the Finero peridotite occurred therefore under conditions that allowed coexistence of H2O–CO2-bearing melts, pargasite, and spinel, that is, temperatures of 980–1080 °C and pressures <2 GPa. The petrostructural observations suggest that the presence of hydrous melts results in accommodation of large amounts of deformation by stress-controlled dissolution–precipitation and advective transport of matter by the melts and in fast grain boundary migration in olivine. By consequence, it produces significant rheological weakening. Water contents in olivine are <4 ppm wt., implying limited contribution of hydration of olivine to weakening. In addition, the analysis of protomylonites composing the external domains of the shear zones that overprint the pervasive foliation indicates that the transition to melt-free conditions results in enhanced contribution of dislocation creep to the deformation. The associated increase of the peridotites' strength leads to onset of strain localization. The latter is not correlated to the local abundance in pargasite or phlogopite, implying that crystallization of amphiboles or phlogopite, even at concentrations of 25 vol.%, does not produce rheological weakening in the upper mantle.
ISSN: 0012-821X

hal-01667879
https://hal.archives-ouvertes.fr/hal-01667879
DOI : 10.1016/j.epsl.2017.08.015

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To quantify the relationships between anisotropy. S-wave splitting and tectonics, we determined the seismic properties of lower-crustal and upper-mantle rocks outcropping in the lvrea Zone (Northem Italy). We obtained P-and S-wave seismic velocities by laboratory direct velocity measurements and/or by calculations based on the modal compositions of the rocks, the lattice preferred orientations (LPOs), and the single crystal stiffness coefficients. Measured P-and S-wave velocities (6.0-7 .5 km s-1 and 3.6-4.2 km s-1) are typical of the lower crust. The P-wave anisotropy is in the range 0-l 0%. Shear-wave birefringence is in the range 0.0-0.6 km s-1 , with typical values between 0.0 and 0.2 km s-1 • In many cases, the birefringence is clearly related to fabric elements (foliation, lineation). Mafic rocks such as anorthosite or pyroxene-bearing gabbros exhibit low P-wave anisotropies (< 5%) and low shear-wave birefringences (less than 0.1 km s-1). In contrast, the seismic properties of felsic rocks such as biotite-bearing gneisses and mafic rocks such as amphibolites display high V P anisotropy (10%) and strong birefringence (0.3 km s-1). Biotite and amphibole preferred orientations clearly control seismic anisotropy and particularly shear-wave splitting. In these rocks, maximum splitting is observed in directions parallel to the foliation with the fast split shear wave polarized parallel to the foliation plane. To have an overview of the seismic properties of this lower-crustal section at a broader scale, we calculated from our data the anisotropie seismic properties of several hypothetical samples that are perhaps more representative of the regional anisotropy than each sample individually. For instance, the average lower-crustal sample displays an anisotropy of 5.5% for P waves and a birefringence around 0.14 km s I for S waves propagating parallel to the foliation. We observe little splitting for waves propagating at high angle to the foliation.
ISSN: 0031-9201

hal-01389712
http://hal.univ-reunion.fr/hal-01389712
http://hal.univ-reunion.fr/hal-01389712/document
http://hal.univ-reunion.fr/hal-01389712/file/Barruol_Kern-PEPI96_hal.pdf
DOI : 10.1016/0031-9201(95)03124-3

Éditeur(s) : HAL CCSD
Résumé : A section of ancient fast-spreading ocean crust was sampled at Wadi Gideah, located in the Wadi Tayin Massif of the Oman ophiolite. This sample suite was used for generating a coherent data set combining various petro-geochemical and structural investigations, with the aim of building a reference section for advancing our understanding of crustal accretion processes at fast-spreading mid-ocean ridges. Additionally, this study focuses on one outcrop that represents part of the fossil axial melt lens (AML).Major and trace element analyses reveal a trend of chemical evolution up section in the lower crust, with a marked difference between the layered gabbros and the foliated gabbros above. Petrological modeling shows that the chemical evolution up section can be produced by hydrous fractionation crystallization, with melt H2O contents of ~0.8 wt% and 0.8 to 1.2 wt% for the lower and upper crust, respectively. Together with the observed very steep bulk Zr/Hf vs. Zr gradient, high F and Cl content of magmatic amphibole, general Nb-Ta depletion of melts compared with NMORB, and high Sr87/Sr86 ratio compared with modern fast-spread crust, this suggests that Wadi Gideah layered gabbros were accreted by crystallization of ascending melts in sills, in a context of subduction initiation. The distinct changes in chemical trends and average grain size at the layered to foliated gabbro transition are tentatively explained by enhanced hydrothermal cooling deeper than the AML. The gabbro/dike transition displays complex structural and lithological relationships that, together with fractional crystallization modeling, point to episodic vertical movements of the AML. Plagioclase crystallographic preferred orientations (CPO) measured over the whole gabbro section are always consistent with magmatic flow. The CPO strength generally increases downward, with more scattering in the layered gabbro section. From the top to the bottom of the layered gabbros, CPO become progressively more prolate, possibly reflecting increasing shear induced by active mantle flow underneath.Wadi Gideah lower crust recorded a formation history consistent with a hybrid accretion model, combing several processes such as downward magmatic flow and/or upward melt migration in the upper foliated gabbros, sill intrusions in the layered gabbros, and deep hydrothermal circulation. The latter was presumably focused in channels, preserved today as several, up to 100 m wide zones of extensively altered former layered gabbro, cross-cutting the magmatic layering. These metagabbros display significantly higher Sr87/Sr86 ratio, late stage magmatic phases, and evidence for high temperature partial melting.
Une coupe d'ancienne croute océanique rapide a été échantillonnée dans le Wadi Gideah, situé dans le Massif de Wadi Tayin de l'Ophiolite d'Oman. Cette série d'échantillons a permis de générer un jeu de données cohérent, combinant des études pétro-géochimiques et structurales, dans le but de construire une coupe de référence pour mieux contraindre notre compréhension des processus d'accrétion crustale aux dorsales océaniques rapides. Ce travail intègre aussi l'étude détaillée d'un affleurement représentant en partie la lentille magmatique axiale (LMA) fossile.Les analyses d'éléments majeurs et traces révèlent une évolution chimique dans la croûte inférieure, avec une nette différence entre les gabbros lités et les gabbros foliés sus-jacents. La modélisation pétrologique montre que l'évolution chimique vers le haut peut être produite par cristallisation fractionnée hydratée, avec des teneurs en H2O des magmas de ~0.8 wt% dans la croute inférieure et 0.8 to 1.2 wt% dans la croute supérieure. Combiné aux forts gradients de Zr/Hf vs. Zr, aux teneurs élevées de F et Cl dans les amphiboles magmatiques, à l'appauvrissement général en Nb-Ta des magmas comparé aux NMORB, et aux rapports Sr87/Sr86 élevés comparés à la croûte rapide moderne, ceci suggère que les gabbros lités du Wadi Gideah ont été formés par la cristallisation des magmas ascendants dans des sills, dans un contexte d'initiation de subduction. Les changements de signature géochimique et de taille de grain à la transition entre gabbros lités et gabbros foliés témoignent possiblement d'un fort refroidissement hydrothermal plus profond que la LMA. La transition complexe filonien/gabbro montre des relations structurale et lithologiques complexes, qui, combinées o la modélisation de la cristallisation fractionnée, traduisent les mouvements verticaux épisodiques de la LMA. Les orientations préférentielles cristallographiques (OPC) des plagioclases mesurées sur l'ensemble de la coupe dans les gabbros témoignent toujours d'une déformation magmatique. L'intensité des OPC a tendance à augmenter vers le bas, avec une plus forte variabilité dans les gabbros lités. Dans les gabbros lités, les OPC sont de plus en plus linéaires vers le bas, résultant possiblement d'un cisaillement plus fort induit par l'écoulement actif du manteau sous-jacent.La croûte inférieure dans le Wadi Gideah a enregistré une histoire compatible avec un modèle d'accrétion hydride, combinant plusieurs processus tels que l'écoulement magmatique vers le bas et/ou la migration de liquides magmatiques vers le haut dans les gabbros foliés supérieurs, l'intrusion de sills dans les gabbros lités, et une circulation hydrothermale profonde. Cette dernière était probablement concentrée dans des chenaux, préservés aujourd'hui sous la forme de plusieurs zones, dont l'épaisseur atteint 100 m, de gabbros lités fortement altérés, recoupant le litage magmatique. Ces métagabbros ont des rapports Sr87/Sr86 élevés, comportent des phases magmatiques tardives et montrent des évidences de fusion partielle.
https://hal.archives-ouvertes.fr/tel-01302675

tel-01302675
https://hal.archives-ouvertes.fr/tel-01302675
https://hal.archives-ouvertes.fr/tel-01302675/document
https://hal.archives-ouvertes.fr/tel-01302675/file/Th%C3%A8se_Tim-Mueller_2015.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Detailed structural and petrological mapping in the Beni Bousera peridotite (Rif Belt, northern Morocco) shows that this orogenic peridotite massif is composed of four tectono-metamorphic domains with consistent kinematics, marked by a pervasive, shallowly dipping foliation with a NW-SE stretching lineation that progressively rotates towards a NNE-SSW orientation in the lowermost part of the massif. From top to bottom, these domains are garnet-spinel mylonites, Ariègite subfacies fine-grained porphyroclastic spinel peridotites, Ariègite-Seiland subfacies porphyroclastic, and Seiland subfacies coarse-porphyroclastic to coarse-granular spinel peridotites. Microstructures and crystal preferred orientations point to deformation dominantly by dislocation creep in all domains, but the continuous increase in average olivine grain size indicates decreasing plastic work rates from top to bottom. This evolution in deformation conditions is consistent with the change in synkinematic pressure and temperature conditions, from 900°C at 2*0 GPa in garnet-spinel mylonites to 1150°C at 1*8 GPa in the Seiland domain. A pervasive diffuse dunitic-websteritic layering subparallel to the foliation suggests deformation in the presence of melt in the Seiland domain. Gravitational instabilities owing to local melt accumulation may account for <200 m wide areas exhibiting a vertical lineation in this domain. To account for the consistent kinematics and the tectono-metamorphic evolution, which implies a temperature gradient of c. 125°C km−1 preserved across the Beni Bousera massif, we propose that the entire massif records the functioning of a low-angle shear zone, a few kilometres wide, which accommodated exhumation of the base of the lithosphere from ∼90 to ∼60 km depth. Partial melting in the Seiland domain may be explained by fast decompression of the footwall, without the need for exotic heat sources. Moreover, if the present-day orientation of the shear zone is similar to that when it was active in the mantle, the stretching lineations at high angle to the metamorphic gradient imply that shearing parallel to the trend of the belt accompanied thinning; that is, a transtensional deformation of the margin.
ISSN: 0022-3530

hal-00950056
https://hal.archives-ouvertes.fr/hal-00950056
DOI : 10.1093/petrology/egt067

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study analyses the interactions between deformation and reactive fluid and melt percolation, and their effects on sub-arc mantle seismic properties based on microstructural observations on mantle xenoliths extracted by the Tubaf and Edison seamounts close to the Lihir Island, in the Papua New Guinea archipelago. These xenoliths sample an oceanic lithosphere, which has experienced high-temperature deformation in the presence of fluids or melts. This was followed by metasomatism under static conditions. Syn-kinematic percolation of reactive Si-rich melts or fluids in peridotites has produced pyroxene-enrichment, grain size reduction, and dispersion of olivine crystal preferred orientation (CPO). Fourier transform infrared spectroscopy analyses show that olivine has very low water contents (1-4 wt. ppm H2O), similar to spinel peridotites from other subduction zones. These low values may record both low water solubility in olivine at low pressure and dehydration during transport and exhumation. Water contents in pyroxenes are highly variable and likely result from spatially heterogeneous melt or fluid percolation. Analysis of olivine CPO indicates dominant activation of both (010)[100] and (001)[100] slip systems, which are characteristic of deformation under high temperature, low stress, low pressure and low to moderate hydrous conditions. Fast S-wave polarization and P- and Rayleigh propagation directions are thus parallel to the mantle flow direction. The pyroxene enrichment by melt-rock reactions is accompanied by dispersion of olivine CPO and induces a significant decrease of the maximum S-wave and P-wave anisotropy in the peridotites. The calculated seismic properties also show that the lowest Vp/Vs ratios (< 1.7) mapped in fore-arc mantle may only be explained by taking in consideration the CPO-induced elastic anisotropy of the peridotites.
ISSN: 0040-1951

hal-00950058
https://hal.archives-ouvertes.fr/hal-00950058
DOI : 10.1016/j.tecto.2013.09.024

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We combined microstructural observations and high-resolution crystallographic preferred orientation (CPO) mapping to unravel the active deformation mechanisms in garnet clinopyroxenites, garnet-spinel websterites, and spinel websterites from the Beni Bousera peridotite massif. All pyroxenites display microstructures recording plastic deformation by dislocation creep. Pyroxene CPOs are consistent with dominant slip on [001]{110} in clinopyroxene and on [001](100) or [001](010) in orthopyroxene. Garnet clinopyroxenites have however high recrystallized fractions and finer grain sizes than spinel websterites. Recrystallization mechanisms also differ: subgrain rotation dominates in garnet clinopyroxenites, whereas in spinel websterites nucleation and growth also contribute. Elongated shapes and strong intracrystalline misorientations suggest plastic deformation of garnet, but CPOs are weak. Clinopyroxene porphyroclasts in spinel websterites show deformation twins underlined by orthopyroxene exsolutions. Thermodynamic calculations indicate that garnet clinopyroxenites deformed at 2.0 GPa and 950-1000 °C and spinel pyroxenites at 1.8 GPa and 1100-1150 °C. The lower temperatures may explain the faster work rates implied by the finer grained microstructures in garnet clinopyroxenites. Greater stresses may have also reduced the competence contrast between garnet and pyroxene in the garnet pyroxenites and, at the outcrop scale, lowered the competence contrast between pyroxenites and peridotites, favoring mechanical dispersion of pyroxenites in the cooler lithospheric mantle.
ISSN: 0191-8141

hal-00750322
https://hal.archives-ouvertes.fr/hal-00750322
DOI : 10.1016/j.jsg.2012.02.019

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the interactions between deformation and percolation of melt or fluids, as well as on the implications of these processes for the seismic properties of the mantle wedge. It is based on the analysis of spinel peridotites from the massif of Ronda (Spain) and two xenolith suites from active subduction zones (Kamchatka, Papua New Guinea). A coupled structural, petrological and geochemical study of these samples shows that they underwent a reactive percolation of melts or Si-rich fluids, which was synchronous to a deformation event occurring under high temperature and low stress conditions, consistent with the PT conditions at the base of the lithosphere or in the asthenosphere. This reactive percolation is responsible for enrichment in pyroxenes, mainly orthopyroxene, which is often localized in bands parallel to the high-temperature foliation. This enrichment is associated with grain size reduction and dispersion of the crystallographic orientation of olivine. The dominant slip system in olivine is {0kl}[100], which results in fast S-wave polarization parallel to the flow direction in the mantle. The decrease in the intensity of the olivine crystal preferred orientations associated with the enrichment in pyroxene results in significant decrease of the anisotropy that may induce an underestimation of the thickness of the anisotropic layer by up to 33%. The observed orthopyroxene enrichment also lowers the Vp/Vs ratio, but cannot explain Vp/Vs < 1.7 mapped locally in the fore-arc mantle in Japan and the Andes. Such low Vp/Vs ratios may however be explained by considering the intrinsic anisotropy of the peridotites, which is generally ignored in large-scale Vp/Vs ratio mapping of the mantle wedge. Infrared analyses show that olivine from the both xenolith collections contains less water than the theoretical saturation calculated for their estimated equilibrium temperature in the spinel stability field. These low water content are similar to those observed in spinel peridotites from other subduction zones and probably record both the low solubility of water in olivine at relatively low pressure and dehydration during exhumation of the xenoliths. These measured water contents as well as theoretical saturation estimations are not sufficient to change the dominant slip direction of in olivine from [100] to [001].
Ce travail apporte de nouvelles contraintes sur les interactions entre déformation et processus d'hydratation et de percolation de magma ou de fluides dans le manteau à l'aplomb d'une zone de subduction et leurs implications sur les propriétés sismiques dans le coin mantellique. Il se base sur l'analyse de péridotites à spinelle provenant du massif de Ronda (Espagne) et deux séries de xénolites issues de zones de subduction actives (Kamchatka, Papouasie-Nouvelle-Guinée). L'étude structurale, pétrologique et géochimique de ces échantillons montrent qu'ils ont subit une percolation réactive de magma ou de fluide synchrone d'une déformation de haute température basse contrainte cohérente avec les condition PT de la base de la lithosphère ou de l'asthénosphère. Cette percolation réactive est responsable d'un enrichissement en pyroxènes, qui est souvent localisé dans des bandes parallèles à la foliation. Cet enrichissement est associé à une dispersion de l'orientation cristallographique de l'olivine. Les systèmes de glissement dominant dans l'olivine sont dans tous les cas {0kl}[100], ce qui implique que la direction de polarisation rapide des ondes S dans la partie supérieure du coin mantellique est parallèle à la direction d'écoulement dans le manteau. La décroissance de l'intensité des OPR de l'olivine associée à l'enrichissement en pyroxènes a pour conséquence une réduction non négligeable de l'anisotropie sismique qui peut induire jusqu'à 33% d'erreur sur l'interprétation de l'épaisseur de la couche anisotrope. Un enrichissement en orthopyroxène peut aussi entraîner une baisse du rapport Vp/Vs, mais ne peut expliquer les rapports Vp/Vs <1,7 cartés dans certains avant-arcs. Cependant de telles valeurs peuvent être expliquées si l'anisotropie des péridotites du coin mantellique est prise en compte. Les analyses par spectroscopie infra-rouge montrent que les olivines des deux séries de xénolites étudiées contiennent moins d'eau que la saturation théorique calculée pour leurs températures d'équilibre dans le domaine du spinelle. Ces faibles concentrations en eau sont similaires à celles observées dans les olivines des péridotites à spinelle des autres zones de subduction. Elles enregistrent probablement la faible solubilité de l'eau dans l'olivine à des pressions relativement basses et la déshydratation au cours de l'exhumation des xénolites. Ces teneurs en eau mesurées ainsi que les estimations de la saturation théorique ne sont pas suffisantes pour changer la direction de glissement dominante dans l'olivine de [100] à [001].
https://tel.archives-ouvertes.fr/tel-00689832

tel-00689832
https://tel.archives-ouvertes.fr/tel-00689832
https://tel.archives-ouvertes.fr/tel-00689832/document
https://tel.archives-ouvertes.fr/tel-00689832/file/These-Soustelle2010.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Progress in seismic methodology and ambitious large-scale seismic projects are enabling high-resolution imaging of the continental crust. The ability to constrain interpretations of crustal seismic data is based on laboratory measurements on rock samples and calculations of seismic properties. Seismic velocity calculations and their directional dependence are based on the rock microfabric, which consists of mineral aggregate properties including crystallographic preferred orientation (CPO), grain shape and distribution, grain boundary distribution, and misorientation within grains. Single-mineral elastic constants and density are crucial for predicting seismic velocities, preferably at conditions that span the crust. However, high-temperature and high-pressure elastic constant data are not as common as those determined at standard temperature and pressure (STP; atmospheric conditions). Continental crust has a very diverse mineral composition; however, a select number of minerals appear to dominate seismic properties because of their high-volume fraction contribution. Calculations of microfabric-based seismic properties and anisotropy are performed with averaging methods that in their simplest form takes into account the CPO and modal mineral composition, and corresponding single crystal elastic constants. More complex methods can take into account other microstructural characteristics, including the grain shape and distribution of mineral grains and cracks and pores. Dynamic or active wave propagation schemes have recently been developed, which offer a complementary method to existing static averaging methods generally based on the use of the Christoffel equation. A challenge for the geophysics and rock physics communities is the separation of intrinsic factors affecting seismic anisotropy, due to properties of crystals within a rock and apparent sources due to extrinsic factors like cracks, fractures, and alteration. This is of particular importance when trying to deduce crustal composition and the state of deformation from seismic parameters.
ISSN: 8755-1209

Droits : info:eu-repo/semantics/OpenAccess
hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568/document
https://hal.archives-ouvertes.fr/hal-01685568/file/Almqvist_et_al-2017-Reviewssur Geophysics.pdf
DOI : 10.1002/2016RG000552

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Constraining mantle deformation beneath plate boundaries where plates interact with each other, such as beneath active or halted mountain belts, is a particularly important objective of "mantle tectonics" that may bring a depth extent to the Earth's surface observation. Such mantle deformation can be mapped at scale lengths of several tens of kilometers through the analysis of seismological data and particularly by mapping seismic anisotropy from the splitting analysis of vertically-propagating SKS waves that largely reflect the strain-induced crystal preferred orientations of the rock-forming minerals within the upper mantle. In the present study, we analyse data from approximately 50 broadband seismic stations covering the Western Alps and we provide a coherent picture of upper mantle anisotropy beneath the belt. The large-scale anisotropy pattern is characterized by fast split directions that closely follow the trend of the belt. Moreover, the maximum anisotropy magnitude is not located beneath the internal zones of the belt but instead beneath external units. All suggests that the anisotropy is likely dominated by sublithospheric mantle deformation. We propose that the observed anisotropy pattern can be explained by recent or active mantle flow around the Eurasian slab presently plunging beneath the inner parts of the Alps.
ISSN: 0012-821X

hal-00617828
https://hal.archives-ouvertes.fr/hal-00617828
https://hal.archives-ouvertes.fr/hal-00617828/document
https://hal.archives-ouvertes.fr/hal-00617828/file/Barruol_SKS_Alpes_EPSL2011_hal.pdf
DOI : 10.1016/j.epsl.2010.12.040

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We have analyzed the microstructures and crystal preferred orientations (CPO), and calculated the seismic properties of 53 mantle xenoliths from four localities within the North Tanzanian Divergence of the East African rift: two within the rift axis and two in the transverse volcanic belt. Olivine OH concentrations were measured in 15 xenoliths.Most samples have harzburgitic to dunitic compositions and high olivine Mg#. Microstructures and olivine CPO patterns vary strongly depending on the location. In-axis peridotites display mylonitic to porphyroclastic microstructures, which record recent deformation by dislocation creep. Highly stretched orthopyroxenes in mylonites indicate that the deformation was initiated under high stress and probably low temperature. Orthopyroxene replacement by olivine in mylonitic and porphyroclastic peridotites suggest syn-kinematic melt–rock reactions and further deformation under near-solidus conditions. Exsolutions in orthopyroxene imply significant cooling between melt-assisted deformation and xenolith extraction. Late metasomatism is evidenced by the occurrence of veins crosscutting the microstructure and interstitial clinopyroxene and phlogopite. Axial-[100] olivine CPOs predominate, suggesting activation of the high temperature, low pressure [100] {0kl} slip systems and, probably, transtensional deformation. In the volcanic belt, Lashaine peridotites display very coarse-granular textures, indicating deformation by dislocation creep under low deviatoric stress conditions followed by annealing. Axial-[010] olivine CPOs are consistent with transpressional deformation or simultaneous activation of the [100](010) and [001](010) slip systems. Intermediate microstructures and CPOs in Olmani suggests heterogeneous deformation within the volcanic belt. Olivine OH concentrations range between 2 and 12 ppm wt. H2O. No systematic variations are observed between in- and off-axis samples. Maximum P wave azimuthal anisotropy (AVp) ranges between 3.3 and 18.4%, and the maximum S wave polarization anisotropy (AVs) between 2.3 and 13.2%. Comparison between seismic properties of in-axis peridotites and SKS splitting data suggests transtensional deformation in the lithospheric mantle beneath the rift.
ISSN: 0040-1951

hal-01121552
https://hal.archives-ouvertes.fr/hal-01121552
DOI : 10.1016/j.tecto.2014.11.011

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Mantle xenoliths in Pliocene alkali basalts of the eastern Betics (SE Iberia, Spain) are spinel ± plagioclase lherzolite, with minor harzburgite and wehrlite, displaying porphyroclastic or equigranular textures. Equigranular peridotites have olivine crystal preferred orientation (CPO) patterns similar to those of porphyroclastic xenoliths but slightly more dispersed. Olivine CPO shows [100]-fiber patterns characterized by strong alignment of [100]-axes subparallel to the stretching lineation and a girdle distribution of [010]-axes normal to it. This pattern is consistent with simple shear or transtensional deformation accommodated by dislocation creep. One xenolith provides evidence for synkinematic reactive percolation of subduction-related Si-rich melts/fluids that resulted in oriented crystallization of orthopyroxene. Despite a seemingly undeformed microstructure, the CPO in orthopyroxenite veins in composite xenoliths is identical to those of pyroxenes in the host peridotite, suggesting late-kinematic crystallization. Based on these observations, we propose that the annealing producing the equigranular microstructures was triggered by melt percolation in the shallow subcontinental lithospheric mantle coeval to the late Neogene formation of veins in composite xenoliths. Calculated seismic properties are characterized by fast propagation of P waves and polarization of fast S waves parallel to olivine [100]-axis (stretching lineation). These data are compatible with present-day seismic anisotropy observations in SE Iberia if the foliations in the lithospheric mantle are steeply dipping and lineations are subhorizontal with ENE strike, implying dominantly horizontal mantle flow in the ENE-WSW direction within vertical planes, that is, subparallel to the paleo-Iberian margin. The measured anisotropy could thus reflect a lithospheric fabric due to strike-slip deformation in the late Miocene in the context of WSW tearing of the subducted south Iberian margin lithosphere.
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809/document
https://hal.archives-ouvertes.fr/hal-01685809/file/Hidas_et_al-2016-Tectonics.pdf
DOI : 10.1002/2016TC004165

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
without abstract
ISSN: 0012-821X

hal-00413027
https://hal.archives-ouvertes.fr/hal-00413027
DOI : 10.1016/j.epsl.2008.07.061

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To constrain the relations between deformation and metasomatism in the subcratonic lithospheric mantle, we have analyzed the microstructures and crystal preferred orientations in 50 mantle xenoliths from the Kaapvaal craton. Water contents in olivine and pyroxenes were measured in 14 samples equilibrated at different depths. Coarse-granular microstructures recording deformation by dislocation creep followed by annealing predominate. Mylonitic (sheared) peridotites with partially or totally recrystallized microstructures are however common below 140 km. Refractory compositions predominate, but multiple metasomatic events resulted in orthopyroxene enrichment or secondary crystallization of clinopyroxene and phlogopite. Coherent orthopyroxene and olivine CPO in most coarse-grained peridotites implies in pre- to syn-kinematic orthopyroxene enrichment or epitaxial growth on primary orthopyroxene. Undeformed, interstitial orthopyroxene, clinopyroxene, and phlogopite with random orientations in coarse-grained peridotites record post-kinematic modal metasomatic events. Deformation of these phases in the sheared peridotites implies that mylonitization results from a later event, which affected locally the deep cratonic lithosphere. Olivine CPO recording dominant [100] glide predominate at all depths. Only two samples, equilibrated at ~ 3.3 GPa show olivine [001] and orthopyroxene [001] axes subparallel, suggesting dominant [001] glide. Water contents in olivine are maximum (150 wt. ppm H2O) in peridotites equilibrated at ~ 160 km depth. Peridotites equilibrated below 180 km depth are, in contrast, almost dry. Lack of correlation between olivine mg# and water content indicates that the high water contents in olivine record re-hydration after the extensive partial melting, which produced the cratonic root. The vertical variation in water contents in olivine observed in the Kaapvaal peridotites may result from hydrogen addition or loss during extraction by the kimberlites. Comparison with magnetotelluric electrical conductivity data suggests, however, that the observed vertical variation of water contents in olivine may be representative of the present-day state of the Kaapvaal mantle, implying that extensive metasomatism resulted in hydration of the cratonic mantle at intermediate depths. The annealed microstructures of Kaapvaal peridotites indicate however that this metasomatism was not followed by remobilization of the cratonic root.
ISSN: 0024-4937

hal-00750328
https://hal.archives-ouvertes.fr/hal-00750328
DOI : 10.1016/j.lithos.2012.05.001

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Reactivation of structures inherited from previous collisional or rifting events, especially lithospheric-scale faults, is a major feature of plate tectonics. Its expression ranges from continental break-up along ancient collisional belts(1,2) to linear arrays of intraplate magmatism and seismicity(3,4). Here we use multiscale numerical models to show that this reactivation can result from an anisotropic mechanical behaviour of the lithospheric mantle due to an inherited preferred orientation of olivine crystals. We explicitly consider an evolving anisotropic viscosity controlled by the orientation of olivine crystals in the mantle. We find that strain is localized in domains where shear stresses on the inherited mantle fabric are high, and that this leads to shearing parallel to the inherited fabric. During rifting, structural reactivation induced by anisotropy results in oblique extension, followed by either normal extension or failure. Our results suggest that anisotropic viscosity in the lithospheric mantle controls the location and orientation of intraplate deformation zones that may evolve into new plate boundaries, and causes long-lived lithospheric-scale wrench faults, contributing to the toroidal component of plate motions on Earth.
ISSN: 1752-0894

hal-00413033
https://hal.archives-ouvertes.fr/hal-00413033
DOI : 10.1038/ngeo528

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have studied the phase transformation of forsterite to wadsleyite under shear stress at the Earth's transition zone pressure and temperature conditions. Two-step experiments were performed using a multi-anvil press. First, we hot pressed iron-free forsterite at 6 or 11 GPa and 1100 degrees C. Then we deformed a slab of this starting material using a direct simple shear assembly at 16 GPa and 1400 degrees C for 1, 15, 35, 40, or 60 min. Both the starting material and the deformed samples were characterized using optical and scanning electron microscopy including measurements of crystal preferred orientations (CPO) by electron back scattered diffraction (EBSD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR). The phase transformation occurs very rapidly, in less than 1 min, and metastable forsterite relics are not observed after deformation. The grain size of wadsleyite is slightly smaller than the forsterite starting material. The water contents obtained from FTIR analyses in forsterite and wadsleyite are 65-124 wt ppm H2O and 114-736 wt ppm H2O, respectively, which are well below water solubility at similar conditions in the presence of free water. Wadsleyite aggregates display weak CPO patterns with [1 0 0] axes concentrated at low angle to the shear direction, [0 1 0] axes perpendicular to the shear plane and nearly random [0 0 1] axes. Only a few dislocations were observed in wadsleyite with TEM. This observation is consistent with the assumption that most dislocations formed during the initial high-stress stages of these stress-relaxation experiments, were consumed in the phase transformation, probably enhancing the transformation rate. CPO patterns vary as a function of the water content: with increasing water content the density of [1 0 0] axes parallel to the shear direction decreases, and the density of [0 0 1] axes increases. Viscoplastic self-consistent modeling of CPO evolution using previously reported glide systems for wadsleyite, i.e., [1 0 0]{0 k 1} and 1/2 (1 1 1){1 0 1}, cannot reproduce the measured CPO, unless the [0 0 1](0 1 0) system, for which dislocations have not been observed by TEM, is also activated. In addition, wadsleyite grain growth suggests the participation of diffusion-assisted processes in deformation. Calculated anisotropies for P and S-waves using measured CPO are always below 1%. This very low anisotropy is due to both the low finite strain achieved in the experiments, which leads to weak wadsleyite CPO, and to the diluting effect of added majorite. The present experiments emphasize the importance of stress, grain size evolution and water content in the forsterite to wadsleyite phase transformation and subsequent deformation in the transition zone.
ISSN: 0031-9201

hal-00617430
https://hal.archives-ouvertes.fr/hal-00617430
DOI : 10.1016/j.pepi.2010.11.001

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We have performed tri-axial compression experiments on olivine aggregates at 900 °C and at a confining pressure of 300 MPa in a high-resolution gas-medium mechanical testing apparatus. Deformation at two different constant strain rates (1.1 × 10− 5 s− 1 and 3.4 × 10− 4 s− 1) yields continuous hardening, reaching maximal differential stresses of 930 and 1076 MPa, respectively, before sample failure at ca. 10% strain. The deformed samples were characterized by electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). Crystallographic preferred orientations (CPO) are weak but reveal an alignment of the [010] axes around the compression direction and some concentration of [001] and [100] axes normal to it. TEM observations confirm plastic deformation by dislocation glide, with both [001] and [100] Burgers vectors. Electron tomography, performed for the first time on deformed fined-grained olivine, shows that [001] dislocations glide extensively on {110} and {130} planes, in complement to the (010) and (100) glide planes often reported at high temperatures. [100] dislocations glide mostly on (010), but {011} and {041} planes are also activated. The experimental CPO and relative activity of slip systems are well reproduced by viscoplastic self-consistent simulations in which all [100] and [001] slip systems have similar strengths. They are also consistent with olivine CPO from natural samples deformed at low temperature. Comparison of the present mechanical results to those obtained for olivine single-crystals at similar conditions shows that at low temperature (below 1100 °C) and high stress (> 300 MPa) polycrystalline olivine has a more complex mechanical behavior than single crystals. However, both datasets advocate for a much weaker dry mantle lithosphere than previously thought.
ISSN: 0040-1951

hal-01053513
https://hal.archives-ouvertes.fr/hal-01053513
DOI : 10.1016/j.tecto.2014.03.022