Éditeur(s) : HAL CCSD Wiley
Résumé : Wood specific gravity (WSG) is a strong predictor of tree performance across environmental gradients. Yet it remains unclear how anatomical elements linked to different wood functions contribute to variation in WSG in branches and roots across tropical forests. [br/][br/]We examined WSG and wood anatomy in white sand, clay terra firme and seasonally flooded forests in French Guiana, spanning broad environmental gradients found throughout Amazonia. We measured 15 traits relating to branches and small woody roots in 113 species representing the 15 most abundant species in each habitat and representative species from seven monophyletic lineages occurring in all habitats. [br/][br/]Fiber traits appear to be major determinants of WSG, independent of vessel traits, in branches and roots. Fiber traits and branch and root WSG increased from seasonally flooded species to clay terra firme species and lastly to white sand species. Branch and root wood traits were strongly phylogenetically constrained. Lineages differed in wood design, but exhibited similar variation in wood structure across habitats. [br/][br/]We conclude that tropical trees can invest differently in support and transport to respond to environmental conditions. Wind disturbance and drought stress represent significant filters driving tree distribution of Amazonian forests; hence we suggest that biophysical explanations should receive more attention.
ISSN: 0028-646X

hal-01195075
https://hal.archives-ouvertes.fr/hal-01195075
PRODINRA : 269680
PUBMED : 24329812

Éditeur(s) : ISTPM
Résumé : The 1951 cruise of the "Président-Théodore-Tissier" was conducted from February 13th to June 30th, 1951. During these four and a half months, the vessel, which departed from Brest, stopped successively in Madeira, the French Caribbean, the Bermudas, Woods Hole, Halifax, on the banks of Newfoundland, the Azores Islands, Saint-Jean-de-Luz, and then sailed back to Brest after 13,000 miles in the Northern Atlantic Ocean. The North-Western Atlantic and the Caribbean Pycnogonida have been the focus in 1948 of a very comprehensive and documented review by J. W. Hedgpeth followed by a catalogue of the stations of the different expeditions which worked in the Northern Atlantic Ocean and the studied species. Moreover, the work of Marcus (1940) on the South-American Pycnogonida is an excellent basis for the study of the tropical Atlantic Pycnogonida. Recently, J.-H. Stock (1954 a) published a preliminary study on Pycnogonida collected at small depths in the Caribbean. During the 1951 cruise of the "Président-Théodore-Tissier", 15 species of Pycnogonida were collected at 16 stations which can be classified, from a biogeographic point of view, in five groups of unequal importance: the floating sargassum (8 stations), the Little Caribbean (5 stations), the Bermudas (1 station), the surroundings of Wood Hole (1 station), the banks of Newfoundland (1 station).
La croisière 1951 du « Président-Théodore-Tissier» a duré du 13 février au 30 juin 1951. Pendant ces quatre mois et demi, le navire, parti de Brest, s'est rendu successivement à Madère, aux Antilles française, aux Bermudes, à Woods Hole, à Halifax, sur les Bancs de Terre-Neuve, aux Açores, à Saint-Jean-de-Luz, et est rentré à Brest après avoir parcouru plus de 13.000 milles dan l'Atlantique Nord. Les Pycnogonides de l'Atlantique Nord-Ouest et des Antilles ont fait l'objet en 1948 d'une révision très complète et documentée de J. W. Hedgpeth suivie d'un catalogue des stations des différentes expéditions ayant travaillé dans l'Atlantique Nord et des espèces récoltées. Par ailleurs, le travail de Marcus (1940) sur les Pycnogonides sud-américains constitue une excellente base pour l'étude des Pycnogonides de l'Atlantique tropical. Enfin, tout récemment J.-H. Stock (1954 a) a publié une étude préliminaire des Pycnogonides récoltés à faible profondeur dans les Antilles. Au cour de la campagne 1951 du «Président-Théodore-Tissier », 15 espèces de Pycnogonides ont été recueillies en 16 stations qui peuvent, au point de vue biogéographie, être classés en cinq groupes d'importance très inégale: les sargasses flottantes (8 stations), les petites Antilles (5 stations), les Bermudes (1 station), les environs de Wood Hole (1 station), les Bans de Terre-Neuve (1 station). ATTENTION : Ce texte a été extrait du document par un processus automatique, non contrôlé, de reconnaissance optique de caractères (OCR). Il est donc susceptible de comporter des erreurs. En cas de doute, consultez le fichier PDF.
Revue des Travaux de l'Institut des Pêches Maritimes (0035-2276) (ISTPM), 1955-12 , Vol. 19 , N. 4 , P. 581-609

Droits : Ifremer
http://archimer.ifremer.fr/doc/1955/publication-6612.pdf
http://archimer.ifremer.fr/doc/00000/6612/

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
A feasibility study of glulam was carried out in French Guiana using local wood species. The aim was to determine gluing parameters affording satisfactory behaviour to manufactured glulam in a tropical climate. Three abundant wood species, with special properties, were selected for the study and Resorcinol-Phenol-Formaldehyde resin was used for bonding. Three industrial parameters were considered: adhesive spread rate, closed assembly time and gluing pressure. Delamination and shearing tests were carried outin accordance with European Standards. The tests revealed the influence of wood properties and manufacturing parameters on joint resistance. In fact, the results showed that specific gravity and the shrinkage coefficientgreatly influenced the gluing step. Indeed, wood with a medium specific gravity needed more adhesive and more pressure than wood with a high specific gravity. In addition, planning and lamella thicknesswere found to affect glue joint resistance.
ISSN: 0018-3768

hal-00856933
https://hal.archives-ouvertes.fr/hal-00856933
https://hal.archives-ouvertes.fr/hal-00856933/document
https://hal.archives-ouvertes.fr/hal-00856933/file/Feasibility_glued_laminated_timber_Bourreau_al.pdf

Éditeur(s) : HAL CCSD
Résumé : The forests of French Guiana occupy a central part of the region’s potential resource base, but as yet remain almost completely unexploited. This stems from the forestry industry struggling to valorize wood stocks of a high diversity with an extremely heterogeneous distribution. Indeed, identifying essences for future propagation is an issue of both environmental and socio-economic importance for the region. Bagassa guianensis Aubl. and Cordia alliodora (Ruiz & Pav.) Oken. go against conventional models, in that they display the life history characteristics of rapid growth and wood of high quality, and thus are species of high potential for future plantations. Firstly, our study of growth characteristics reveals a defined strategy half way between long-lived species and pioneer species. It is the variability of basic density of wood which is a key trait allowing for such a development, favoring rapid growth in initial years whilst allowing for tree longevity. Secondly, the analysis of a range of wood properties (shrinkage, modulus of elasticity, durability) in relation to tree growth confirms the technologic quality of the two species. It also enables the emergence of new results like the effect of extractives on wood stability, the control of growth as a result of basic density variation, the evolution of leaf traits throughout tree development or the improvement of trunk maintenance thanks to interlocked grain. The knowledge gained in relation to the developmental traits of these two species, and to the quality of their wood allows for the elaboration of plantation projects and what will be required for their success. The results of this study can orientate future studies on novel species for commercialization in French Guiana.
La ressource forestière en Guyane occupe une place maîtresse au sein de la région et est encore majoritairement préservée, mais la filière bois parvient difficilement à valoriser la biodiversité locale en raison de l’hétérogénéité de la ressource. Identifier les essences à planter demain représente aujourd’hui un enjeu à la fois environnemental, économique et social pour la Guyane. Bagassa guianensis Aubl. et Cordia alliodora (Ruiz & Pav.) Oken. vont à l’encontre des modèles usuels en associant vitesse de croissance et qualité du bois et sont identifiées comme prometteuses pour la plantation. Dans un premier temps, l’étude de la dynamique de croissance des deux espèces révèle un modèle écologique singulier, à la fois pionnières et longévives. La variabilité de l’infradensité dans l’arbre est l’élément clé qui permet un tel développement, favorisant une croissance rapide dans les premières années tout en assurant la longévité de l’individu. Dans une seconde partie, l’analyse d’un large panel de propriétés du bois (retrait, module, durabilité) en lien avec le développement de l’arbre confirme les qualités technologiques des deux espèces et permet l’émergence de résultats novateurs tels que le rôle des extractibles sur le retrait, le contrôle de la croissance grâce aux variations d’infradensité, l’évolution des traits foliaires au cours de l’ontogénie ou encore la mise en place de contrefil dans l’arbre pour assurer son maintien. La connaissance acquise vis-à-vis du mode de développement de ces deux espèces et des facteurs influençant la qualité de leur bois permet aujourd’hui de définir avec plus de précision le cadre d’un projet de plantation et les conditions de son succès. Les résultats de cette étude permettent finalement d’orienter la recherche de nouvelles espèces d’avenir pour la plantation en Guyane.
https://tel.archives-ouvertes.fr/tel-01338281

tel-01338281
https://tel.archives-ouvertes.fr/tel-01338281
https://tel.archives-ouvertes.fr/tel-01338281/document
https://tel.archives-ouvertes.fr/tel-01338281/file/Th%C3%A8se%20Julie%20Bossu.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called G-layer, in the fibre wall. The structure of G-layer has been recently described as a hydrogel thanks to N2 adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2 to 50 nm). This led us to revisit the concept of G-layer that was until now only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with typical thick G-layer while it is much less with thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without G-layer is as low as in normal wood. Not depending on the amount of pores, the pore sizes distribution are always centred around 6-12 nm. These results suggest that, among species producing fibres with G-layer, large structural differences of G-layer exist between species
ISSN: 0022-0957

hal-00387861
https://hal.archives-ouvertes.fr/hal-00387861
DOI : 10.1093/jxp/erp133

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
Background : This study examines the radial trend in wood stiffness of tropical rainforest trees. The objective was to determine if the type of growing environment (exposed plantation or dense primary forest) would have an effect on this radial trend. Methods : The axial elastic modulus of wood samples, representing a pith to bark cross-section, of six trees from several French Guianese species (two of Eperua falcata, one of Eperua grandiflora, two of Carapa procera and one of Symphonia gloubulifera) was measured using a dynamic "forced vibration" method. Results : Primary forest trees were observed to have a decrease in wood stiffness from pith to bark, whereas plantation trees, from the same genus or species, displayed a corresponding increase in wood stiffness. Juvenile wood stiffness appears to vary depending on the environment in which the tree had grown. Conclusion : We suggest that the growth strategy of primary forest trees is to produce wood resistant to selfbuckling so that the height of the canopy may be obtained with the maximum of efficiency. In contrast, the growth strategy of the trees growing in an exposed plantation is to produce low-stiffness wood, important to provide flexibility in wind. Further experiments to study the behaviour of more species, with more individuals per species, growing across a range of physical environments, are required.
ISSN: 1286-4560

hal-00644335
https://hal.archives-ouvertes.fr/hal-00644335
https://hal.archives-ouvertes.fr/hal-00644335/document
https://hal.archives-ouvertes.fr/hal-00644335/file/McLean_al.pdf
DOI : 10.1007/s13595-011-0085-z

Éditeur(s) : HAL CCSD
Résumé : International audience
A key element of the biomechanical design of trees is their ability to generate largemechanical stresses in wood at the stem periphery. This function is necessary for the tree tocontrol the orientation of its axes, and therefore to grow in height, maintain its branches at anoptimal angle or achieve adaptive reorientations (Fournier et al., 2013). This “maturationstress” appears in wood fibres during their cellular maturation when their secondary cell wallis thickening. In hardwoods, the stress asymmetry is generated by the formation of specificfibres with a very high tensile growth stress on the upper side of the inclined axis. Theresulting tension wood has microstructural features highly different from the normal wood.Tension wood in almost all temperate species has a specific gelatinous cell wall layer, calledG-layer, that is not lignified and highly mesoporous (Chang et al., 2015). It has been shownrecently, at the macroscopic scale, that cellulose tension appears during maturation and issynchronous with the development of this specific layer (Clair et al., 2011). Tropical species,like simarouba, are able to generate lignified tension wood fibres. The mechanisms of stressgeneration in tension wood fibres are not yet well known. The aim of our study is tounderstand these mechanisms and to know the spatial and temporal kinetics of the differentcell wall layers stiffening during maturation, in parallel with tensile stress generation.Contact-Resonance Atomic Force Microscopy, CR-AFM, was used here to address thisquestion on embedded samples (Arnould and Arinero, 2015) using dual resonance frequencytracking (DRFT, Rodriguez et al., 2007). Change in the contact modulus between, and within,each layer of the cell wall has been measured on several radial lines of developing fibres atdifferent steps. In order to understand the obtained results, and to estimate the sensitivity ofthe AFM indentation-like technique to the different cell wall components stiffness, an elasticanisotropic indentation model was used (Vlassak et al., 2003; Jäger et al., 2011). Finally,these mechanical measurements have been compared to topochemical data obtained on thesame fibres.
8th Plant Biomechanics International Conference
Nagoya, Japan

hal-01436113
https://hal.archives-ouvertes.fr/hal-01436113

Éditeur(s) : HAL CCSD Botanical Society of America
Résumé : Premise of the study : Wood density correlates with mechanical and physiological strategies of trees and is important for estimating global carbon stocks. Nonetheless, the relationship between branch and trunk xylem density has been poorly explored in neotropical trees. Here, we examine this relationship in trees from French Guiana and its variation among different families and sites, to improve the understanding of wood density in neotropical forests. Methods : Trunk and branch xylem densities were measured for 1909 trees in seven sites across French Guiana. A major-axis fit was performed to explore their general allometric relationship and its variation among different families and sites. Key results : Trunk xylem and branch xylem densities were significantly positively correlated, and their relationship explained 47% of the total variance. Trunk xylem was on average 9% denser than branch xylem. Family-level differences and interactions between family and site accounted for more than 40% of the total variance, whereas differences among sites explained little variation. Conclusions : Variation in xylem density within individual trees can be substantial, and the relationship between branch xylem and trunk xylem densities varies considerably among families and sites. As such, whole-tree biomass estimates based on non-destructive branch sampling should correct for both taxonomic and environmental factors. Furthermore, detailed estimates of the vertical distribution of wood density within individual trees are needed to determine the extent to which relying solely upon measures of trunk wood density may cause carbon stocks in tropical forests to be overestimated.
ISSN: 0002-9122

hal-01032401
https://hal.archives-ouvertes.fr/hal-01032401
DOI : 10.3732/ajb.1000034

Éditeur(s) : HAL CCSD
Résumé : International audience
Tension wood, a tissue developed by angiosperm trees to actively recover their verticality, has long been defined by the presence of an unlignified cellulosic inner layer in the cell wall of fibres, called the G-layer. Although it was known that some species have no G-layer, the definition was appropriate since it enabled easy detection of tension wood zones using various staining techniques for either cellulose or lignin. For several years now, irrespective of its anatomical structure, tension wood has been defined by its high mechanical internal tensile stress. This definition enables screening of the diversity of cell walls in tension wood fibres. Recent results obtained in tropical species with tension wood with a delay in the lignification of the G-layer opened our eyes to the effective presence of large amounts of lignin in the G-layer of some species. This led us to review older literature mentioning the presence of lignin deposits in the G-layer and give them credit. Advances in the knowledge of tension wood fibres allow us to reconsider some previous classifications of the diversity in the organisation of the fibre walls of the tension wood.
ISSN: 0928-1541

hal-01636686
https://hal.archives-ouvertes.fr/hal-01636686
https://hal.archives-ouvertes.fr/hal-01636686/document
https://hal.archives-ouvertes.fr/hal-01636686/file/2017_Ghislain-Clair_IAWAJ_DiversityOrganisationLignificationTensionWoodFibreWalls-AReview.pdf
DOI : 10.1163/22941932-20170170

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé :  
On 10 trees from 10 species of French Guyana tropical rainforest in a clear active process of restoring verticality growth strains were measured in situ in order to determine the occurrence of tension wood within samples. Wood specimens were cut in the vicinity of the growth strains measurements in order to measure some mechanical and physical properties. As suspected, tensile growth strains was very much higher in tension wood zone, because longitudinal modulus of elasticity was slightly higher. Longitudinal shrinkage was also much higher in tension wood than in opposite wood.
ISSN: 1286-4560

hal-01032110
https://hal.archives-ouvertes.fr/hal-01032110
DOI : 10.1051/forest:2007027

Éditeur(s) : HAL CCSD Springer Verlag
Résumé :  
Growth strains were measured in situ in nine trees of three species from a French Guiana tropical rainforest in a clearly active verticality restoration process. The aim was to detect tension wood within the samples. Wood specimens were cut in the vicinity of the growth strain measurements in order to determine the microfibril angle and some mechanical and physical properties. As suspected, tensile growth strain was much higher in tension wood zones, as shown by the slightly higher longitudinal modulus of elasticity. Conversely, tension wood showed reduced compression strength. Longitudinal shrinkage was much higher in tension wood than in opposite wood. Clear relationships between the microfibril angle and longitudinal properties were noted in comparison (i) with those observed in gymnosperm compression wood and (ii) with expected relationships from the organization of wood fibres cell wall structure.
ISSN: 0043-7719

hal-01032114
https://hal.archives-ouvertes.fr/hal-01032114
DOI : 10.1007/s00226-010-0323-9

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A
Résumé :  
The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called the G-layer, in the fibre cell wall. The structure of the G-layer has recently been described as a hydrogel thanks to N2 adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2-50 nm). This led us to revisit the concept of the G-layer that had been, until now, only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with a typical thick G-layer while it is much less with a thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without a G-layer is as low as in normal wood. Not depending on the amount of pores, the pore size distribution is always centred around 6-12 nm. These results suggest that, among species producing fibres with a G-layer, large structural differences of the G-layer exist between species.
Journal of Experimental Botany

hal-01032161
https://hal.archives-ouvertes.fr/hal-01032161
DOI : 10.1093/jxb/erp133

Éditeur(s) : HAL CCSD
Résumé : International audience
The main biological function of reaction wood is to act as “muscle” for trees, enabling them to control their posture and right stems when they are permanently disturbed from their set-point inclination by gravity or winds. The key property to achieve this function is the development of high mechanical stress during the formation of reaction wood cells, called “maturation strains”. Moreover, this function is basically performed through the asymmetric formation of wood (in quantity or quality) around the tree circumference. This asymmetry enables stems to bend upward or to compensate for the downward bending induced by gravity, as an asymmetric force associated to maturation strains creates a bending moment (i.e. one side of the stem “pulls” the other one). We will discuss the traits (cross sectional size and shape, wood features as G fibers or microfibril angle, eccentric growth even in usual or extreme cases as buttresses, total biomass growth and height of center of mass, stem lean and set-point angle) involved to understand how the posture control works. We will give simple formulas to estimate a “muscle efficiency” from biomechanical modeling. We will give practical methods to estimate all the involved traits, especially maturation strains from direct and indirect measurements, in peripheral functional wood or by retrospective dendrochronological analysis. Then, we will illustrate how tree stem tropisms and especially gravitropism, widely studied by physiologists, are key processes in natural ecosystems, through practical examples from tropical rainforest tree communities and regeneration of European mixed beech forests. Using the previous definition of postural control efficiency, we will show that the cross section size is rapidly a limiting factor, opposing the extreme strategies of flexible small stems, which bend easily but also right themselves quickly, to stiff big stems. Lastly, as wood in living trees ensures general storage, defence, vascular and skeletal functions, we will ask general questions about synergies and trade-offs between posture control and other functions.
Botany 2014 : new frontiers in botany
Boise, United States

hal-01627031
https://hal.archives-ouvertes.fr/hal-01627031

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large organic falls to the benthic environment, such as dead wood or whale bones, harbour organisms relying on sulfide-oxidizing symbionts. Nothing is known however, concerning sulfide enrichment at the wood surface and its relation to wood colonization by sulfide-oxidizing symbiotic organisms. In this study we combined in situ hydrogen sulfide and pH measurements on sunken wood, with associated fauna microscopy analyses in a tropical mangrove swamp. This shallow environment is known to harbour thiotrophic symbioses and is also abundantly supplied with sunken wood. A significant sulfide enrichment at the wood surface was revealed. A 72 h sequence of measurements emphasized the wide fluctuation of sulfide levels (0.1->100 lM) over time with both a tidal influence and rapid fluctuations. Protozoans observed on the wood surface were similar to Zoothamnium niveum and to vorticellids. Our SEM observations revealed their association with ectosymbiotic bacteria, which are likely to be sulfide- oxidizers. These results support the idea that sunken wood surfaces constitute an environment suitable for sulfide-oxidizing symbioses.
ISSN: 0141-1136

hal-00751649
https://hal.univ-antilles.fr/hal-00751649

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
1. Estimating forest above-ground biomass (AGB), or carbon (AGC), in tropical forests has become a majorconcern for scientists and stakeholders. However, AGB assessment procedures are not fully standardized andeven more importantly the uncertainty associated with AGB estimates is seldom assessed.2. Here, we present an R package designed to compute both AGB/AGC estimate and its associated uncertaintyfrom forest plot datasets, using a Bayesian inference procedure. The package builds upon previous work onpantropical and regional biomass allometric equations and published datasets by default but it can alsointegrate unpublished or complementary datasets in many steps.3. BIOMASS performs a number of standard tasks on input forest tree inventories: i) tree speciesidentification, if available, is automatically corrected; ii) wood density is estimated from tree species identity;iii) if height data are available, a local height-diameter allometry may be built; else height is inferred frompantropical or regional models; iv) finally, AGB/AGC are estimated by propagating the errors associated withall the calculation steps up to the final estimate. R code is given in the paper and in the appendix forillustration purpose.4. The BIOMASS package should contribute to improved standards for AGB calculation for tropical foreststands, and will encourage users to report the uncertainties associated with stand-level AGB/AGC estimatesin future studies.
ISSN: 2041-210X

hal-01558180
https://hal.archives-ouvertes.fr/hal-01558180
DOI : 10.1111/2041-210X.12753

Éditeur(s) : Société Française d'Ichtyologie
Résumé : In the present paper a new genus, Diretmoides, and a new species, Diretmoides parini, of the berycomorph family Diretmidae is described. The hitherto single genus of the family, Diretmus Johnson, 1863, therefore becomes monotypic while the new genus includes two species pauciradiatus (Woods, 1973) and parini sp. nov. The genus Diretmus is mainly charactcrized by three features (1) by its anus placed immediately anterior to the anal fin, (2) by a prepelvic ridge of ventral scutes and (3) by the high number of bony lamellae on the upper third of the operculum. The species of Diretmoides on the other hand have (1) their anus midway between the pelvics and the anal fin, (2) the ventral midline anterior to their pelvics is flat and is covered by normal body-scales and (3) there are only a few lamellae on the upper third of the operculum. Juveniles of the two Diretmoides-species differ from each other in their colour pattern,the adolescents and adults in meristic characters. All described species live meso-to bathypelagically. D. argenteus is widely distributed in tropical and temperate waters of all oceans. The two Diretmoides -species also live in the Atlantic as well as in the Pacific. However there is only one record of Diretmoides parini and none of D. pauciradiatus from the Indian Ocean. In addition to the described species, indication is given of the presumable existence of a third Diretmoides-species from off Japan. Artificial keys to adults and juveniJes are given at the end of this paper. NOT CONTROLLED OCR
Les auteurs décrivent un nouveau genre, Diretmoides, et une nouvelle espèce, Diretmoides parini. Le genre Diretmus ne comprend plus qu'une seule espèce D. argenteus Johnson, 1863; Diretmoides en comporte deux;D. pauciradiatus (Woods, 1973) d D. parini n.sp. Le genre Diretmus est caractérisé principalement par la position de l'anus juste en avant de l'anale par la présence en avant des pelviennes d'une carène épineuse ventrale et par la densité des lamelles osseuses sur le tiers supérieur de l'opercule. Chez Diretmoides l'anus est à mi-distance entre l'anale et les pelviennes; il n'y a pas de carène épineuse ventrale en avant des pelviennes et, sur le tiers supérieur de l'opercule, les lamelles osseuses sont peu nombreuses et éparses. Les jeunes Diretmoides se distinguent les uns des autres par leur coloration, les adolescents et les adultes par leurs caractères méristiques. Tous les Diretmidés actuellement connus sont des espèces méso à bathypélagiques. D. argenteus est largement distribué dans les eaux tropicales et tempérées de tous les océans. Les deux espèces de Diretmoides ont été signalées dans l'Atlantique et te Pacifique mais on ne connaît qu'une seule capture de D. parini dans l'océan indien et aucune de D. pauciradiatus. En outre. l'étude d'exemplaires provenant du Japon a amené les auteurs à souligner l'existence probable d'une troisième espèce de Diretmoides. Deux clés de détermination, l'une pour les adultes, l'autre pour les jeunes des trois espèces décrites, sont données à la fin de cette note. OCR NON CONTRÔLE
Cybium (Société Française d'Ichtyologie), 1981 , Vol. 5 , N. 1 , P. 33-60

Droits : 1981 Société Française d'Ichtyologie
http://archimer.ifremer.fr/doc/1981/publication-3746.pdf
http://archimer.ifremer.fr/doc/00000/3746/

Éditeur(s) : HAL CCSD
Résumé : The relation between primary and secondary growth has been traditionally studied in terms of growth units and has always being assumed as closely correlated. Pluviometric variation directly affects growth patterns in the neotropical pioneer species Jacaranda copaia. In French Guiana this species produces annual growth rings in the dry season that can be seen with the naked eye.The morphological and anatomical description of three monocaulous individuals was made node by node. The trees where felled at a roadside locality close to the city of Kourou, French Guiana. The comparison of intermodal distance, pith transversal area and wood ring area variation within an individual elucidates the origin of well-known problems in dendrochronological analysis of tropical trees.The wood found close to the pith, known as young wood, always has false wood rings; the production of these rings is correlated with short intermodal distances and small pith transversal area. This phenomenon seems to be caused by minor intrannual pluviometric variation that affects both primary and secondary growth. This new methodological approach helps morphologists and anatomists interpret growth patterns in tropical trees in a more holistic way.
Botany 2010
Rhode Island, United States

hal-01032389
https://hal.archives-ouvertes.fr/hal-01032389

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Cross-species analyses of plant functional traits have shed light on factors contributing to differences in performance and distribution, but to date most studies have focused on either leaves or stems. We extend these tissue-specific analyses of functional strategy towards a whole-plant approach by integrating data on functional traits for 13 448 leaves and wood tissues from 4672 trees representing 668 species of Neotropical trees. Strong correlations amongst traits previously defined as the leaf economics spectrum reflect a tradeoff between investments in productive leaves with rapid turnover vs. costly physical leaf structure with a long revenue stream. A second axis of variation, the 'stem economics spectrum', defines a similar tradeoff at the stem level: dense wood vs. high wood water content and thick bark. Most importantly, these two axes are orthogonal, suggesting that tradeoffs operate independently at the leaf and at the stem levels. By simplifying the multivariate ecological strategies of tropical trees into positions along these two spectra, our results provide a basis to improve global vegetation models predicting responses of tropical forests to global change.
ISSN: 1461-023X

hal-00594040
https://hal.archives-ouvertes.fr/hal-00594040

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option B
Résumé : International audience
To recover verticality after disturbance, angiosperm trees produce " tension wood " allowing them to bend actively. The driving force of the tension has been shown to take place in the G-layer, a specific unlignified layer of the cell wall observed in most temperate species. However, in tropical rain forests, the G-layer is often absent and the mechanism generating the forces to reorient trees remains unclear. A study was carried out on tilted seedlings, saplings and adult Simarouba amara trees – a species known to not produce a G-layer. Microscopic observations were done on sections of normal and tension wood after staining or observed under UV light to assess the presence/absence of lignin. We showed that S. amara produces a cell-wall layer with all of the characteristics typical of G-layers, but that this G-layer can be observed only as a temporary stage of the cell-wall development because it is masked by a late lignification. Being thin and lignified, tension wood fibres cannot be distinguished from normal wood fibres in the mature wood of adult trees. These observations indicate that the mechanism generating the high tensile stress in tension wood is likely to be the same as that in species with a typical G-layer and also in species where the G-layer cannot be observed in mature cells.
ISSN: 0829-318X

hal-01229280
https://hal.archives-ouvertes.fr/hal-01229280
https://hal.archives-ouvertes.fr/hal-01229280/document
https://hal.archives-ouvertes.fr/hal-01229280/file/Roussel-Clair-2015-TreePhysiol-LateLignifGLayerSimarouba_preprintHAL.pdf
DOI : 10.1093/treephys/tpv082

Éditeur(s) : HAL CCSD Wiley
Résumé :  
1. Relationships between tropical rain forest biomass and environmental factors have been determined at regional scales, e.g. the Amazon Basin, but the reasons for the high variability in forest biomass at local scales are poorly understood. Interactions between topography, soil properties, tree growth and mortality rates, and treefalls are a likely reason for this variability. 2. We used repeated measurements of permanent plots in lowland rain forest in French Guiana to evaluate these relationships. The plots sampled topographic gradients from hilltops to slopes to bottomlands, with accompanying variation in soil waterlogging along these gradients. Biomass was calculated for >175 tree species in the plots, along with biomass productivity and recruitment rates. Mortality was determined as standing dead and treefalls. 3. Treefall rates were twice as high in bottomlands as on hilltops, and tree recruitment rates, radial growth rates and the abundance of light-demanding tree species were also higher. 4. In the bottomlands, the mean wood density was 10% lower than on hilltops, the basal area 29% lower and the height:diameter ratio of trees was lower, collectively resulting in a total woody biomass that was 43% lower in bottomlands than on hilltops. 5. Biomass productivity was 9% lower in bottomlands than on hilltops, even though soil Olsen P concentrations were higher in bottomlands. 6. Synthesis. Along a topographic gradient from hilltops to bottomlands there were higher rates of treefall, which decreased the stand basal area and favoured lower allocation to height growth and recruitment of light-demanding species with low wood density. The resultant large variation in tree biomass along the gradient shows the importance of determining site characteristics and including these characteristics when scaling up biomass estimates from stand to local or regional scales.
ISSN: 0022-0477

hal-01032100
https://hal.archives-ouvertes.fr/hal-01032100